Académique Documents
Professionnel Documents
Culture Documents
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
INTRODUCTION
2
WARNING/SAFETY
WARNING
This catalog is intended to provide general guidance and to assist in making the proper hose selection for an application. While the information in this catalog is believed to be accurate, it is based on specific laboratory tests performed under controlled conditions, calculations and assumptions, and not actual field conditions or applications. As such, it does not represent a guarantee with respect to characteristics or performance of the product in any given application or use. Thermoid hose products are intended for selection and use by trained and skilled purchasers and users. The purchaser or user is obligated to determine the suitability of hose for the specific application or use, and to ascertain that intellectual property rights of third parties are not violated.
HBD/THERMOID MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, EXCEPT AS IS EXPRESSLY SET IN ITS TERMS AND CONDITIONS OF SALE. HBD/THERMOID SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. See our terms
Information in this catalog is subject to revision without notice. For the most current product information visit our website at www.hbdthermoid.com or contact your HBD/Thermoid Customer Service Representative.
SAFETY
In any application where hose failure could cause bodily injury, property damage or other loss, the user is responsible for implementation and maintenance of adequate safety measures. These should include: Regular Inspections. Hose used in such applications should be inspected at frequent intervals based on the seriousness of the risk. These inspections should include: tube and cover examinations for hardening, brittleness, abrasions, cracks, cuts, blisters, braid exposure and other deterioration and damage; inspection for seepage, leaking slipped couplings and damage to or around couplings; and proof test. Damaged or suspect hose should be replaced immediately. Personal Protective Equipment. Always use proper protective equipment (for example, gloves, eye protection, protective suits, hardhats, etc.) that will protect the user in the event of hose failure or other accident. Operator Training. All operators must be thoroughly trained in the care and use of hoses and material conveyed. Failure to exercise proper safety precautions could result in serious bodily injury, death, property damage or other loss from chemical, elevated temperature materials, explosive or flammable material, impelled couplings, whipping hose, and high pressure or high velocity discharge of materials.
and conditions of sale for further details. This catalog contains important information regarding the Thermoid hose products, including information on the following topics: Welding Hose Chemical Hose and Chemical Resistance Chart Steam Hose Use of Hose in Explosive Atmospheres (Static Electricity) Please read and understand these and other available guidance before selecting or recommending a hose for your application.
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
INTRODUCTION
INDUSTRIAL HOSE PRODUCTS DELIVERED WHERE AND WHEN YOU NEED THEM
With nationally recognized distributors, strategically located product warehouse facilities and manufacturing plants, HBD/Thermoid, Inc. can deliver the products you require.
Bellefontaine, OH
Salisbury, NC
q q q
HBD/Thermoid, Inc. Our name is widely known and respected as a top-quality manufacturer of industrial rubber products, including air, automotive, aviation, bulk transfer, chemical, hand-built, marine, water, welding and multipurpose industrial hose. HBD/Thermoid, Inc. also produces a variety of other products such as industrial ducting, power transmission belts, conveyor belting, coated rubber fabrics, industrial rubber bands, rubber budding strips and rubber roll coverings. HBD/Thermoid, Inc. has always provided its customers with application engineered products that are technologically advanced in a personalized, customer friendly manner. All Thermoid brand products, some of which have a 130-year-old legacy of excellence behind them, are produced at HBD/Thermoid, Inc.s five manufacturing plants: Bellefontaine, OH; Chanute, KS; Elgin, SC; Oneida, TN and Salisbury, NC. Thermoid brand products are used by thousands of industrial customers and consumers around the world. Agriculture, aviation, automotive, basic manufacturing, construction, graphics, food processing, mining, petroleum, railroads, robotics, steel production, transportation and textile manufacturing are just a few of the many markets our products serve.
Oneida, TN
HBD/Thermoid, Inc. Manufacturing Plants/Product Warehouses HBD/Thermoid, Inc. Product Warehouse All Products HBD/Thermoid, Inc. Product Warehouses Power Transmission Belts HBD Industries, Inc. Headquarters
All of the comprehensive and competitively priced products manufactured by HBD/Thermoid, Inc. are produced in environmentally safe manufacturing facilities that operate under the guidance of ISO 9001 Quality Systems. Our expert design and application engineering staff is available to assist and consult with customers, product design engineers and OEMs on new products or product systems. All Thermoid brand products are thoroughly tested and application engineered to ensure long-term performance and worker safety. HBD/Thermoid, Inc. products are available world-wide through a select group of industrial distributors supplying the MRO requirements of customers serving the manufacturing, construction, agricultural, processing, mining, forestry, mineral exploration, transportation, repairs, recreation and consumer markets. Additionally, our product stocking warehouses are conveniently located to provide for timely delivery of any type of hose, belt, conveyor belting, ducting, rubber band or any other HBD/Thermoid, Inc. products that you or your customers may need.
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
INTRODUCTION
Warning/Safety . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hose Environmental/Physical Properties Resistance Reference Symbols . . . . . . . . . . . . . . . . . . . . . . 2 HBD/Thermoid, Inc. Map . . . . . . . . . . . . . . . . . . . 3
GENERAL INFORMATION
Commitment to Excellence . . . . . . . . . . . . . . . . . General Hose Information . . . . . . . . . . . . . . . . . . The Thermoid Brand Advantage . . . . . . . . . . . RMA Oil Resistance Data . . . . . . . . . . . . . . . . . . Minimum Hose Bend Radius Data (MBR) . . . . . . 6 7 7 7 7
Factors Affecting Hose Service Life . . . . . . . . . . . 8-9 Steam Hose Warning . . . . . . . . . . . . . . . . . . . . . 8 Chemical Hose Warnings . . . . . . . . . . . . . . . . 9 &128 Static Electricity Warning . . . . . . . . . . . . . . . . . . . 9 Care, Maintenance and Storage . . . . . . . . . . . . . 10 Hose Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Hose and Coupling Selection Guide . . . . . . . . . . 12
Chemical Resistance Chart . . . . . . . . . . . . . . . . . Chemical Warning/Caution . . . . . . . . . . . . . . . . . Industrial Hose Conversion Factors Decimal & Metric Equivalents . . . . . . . . . . . . . . . Conversion Factors . . . . . . . . . . . . . . . . . . . . . . . Temperature Conversion . . . . . . . . . . . . . . . . . .
TECHNICAL REFERENCE
Welding Hose Technical Information . . . . . . . . . . 117 Bulk Transfer/Transporter Hose Product Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
SPECIAL APPLICATIONS
ELEPHANT TRUNK . . . . . . . . . . . . . . . . . . . . . . FLIGHTMASTER AIRCRAFT REFUELING . . . FLIGHTMASTER JAC RISOR . . . . . . . . . . . . . FURNACE DOOR (Wire Braid) . . . . . . . . . . . . . . HIGHFLEX GRADE C ROTARY VIBRATOR, DRILLING & DECOKER . . . . . . . . . . . . . . . . . . HIGHFLEX GRADE D ROTARY DRILLING . . . . SLIM HOLE ROTARY DRILLING . . . . . . . . . . . . THERMOID MUD PUMP SUCTION . . . . . . . . . . TRANSPORTER HOT TAR & ASPHALT . . . . . Sand Blast BLAST-FLEX SAND BLAST . . . . . . . . . . . . . . WRAPPED SAND BLAST . . . . . . . . . . . . . . . . .
FOOD INDUSTRY
FISH SUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . KOROBRAID TUBING . . . . . . . . . . . . . . . . . . . KOROKLEAR TUBING . . . . . . . . . . . . . . . . . . . RADIAL FLEX CLEAR FOOD PROCESSING . TRANSPORTER FOOD DISCHARGE . . . . . . . TRANSPORTER FOOD SUCTION Gray Smooth Cover . . . . . . . . . . . . . . . . . . . . . TRANSPORTER FOOD SUCTION White Corrugated Cover . . . . . . . . . . . . . . . . . . TRANSPORTER GRAY SHADOW FOOD SUCTION . . . . . . . . . . . . . . . . . . . . . . . TYPE 95 FOOD - Gray Cover . . . . . . . . . . . . . . . TYPE 96 FOOD - Gray Cover . . . . . . . . . . . . . . . TYPE 120 FOOD - Gray Cover . . . . . . . . . . . . . .
STEAM
BURSTPROOF OIL RESISTANT STEAM Thermocure . . . . . . . . . . . . . . . . . . . . . . . . . . . . BURSTPROOF REGULAR STEAM Thermocure . . . . . . . . . . . . . . . . . . . . . . . . . . . . PILE DRIVER STEAM . . . . . . . . . . . . . . . . . . . . 96 96 97
AUTOMOTIVE/MARINE COOLANT
Automotive Air Brake, Fuel, Heater & Coolant AIR BRAKE, TYPE A - SAE J1402 & DOT FMVSS 106 . . . . . . . . . . . . . . . . . . . . . . . 28 BLACK STANDARD HEATER & BLACK OEM HEATER SAE 20R3, CLASS D2 TYPE . . . . . . 28 FUEL LINE, VAPOR EMISSION & CRANKCASE VENTILATION - Similar to SAE 30R7 . . . . . . . . 29 GENERAL PURPOSE COOLANT & DISCHARGE 100 & 100A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 HEAVY DUTY COOLANT & DISCHARGE 101 & 101B . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 1158 SOFTWALL AROMATIC FUEL SAE 30R2 TYPE 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 2012 STANDARD WALL 3/16" COOLANT SAE 20R1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 2015 HEAVY WALL 1/4" COOLANT SAE 20R1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 3003 SILICONE COOLANT STANDARD WALL 3/16" . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 3004 SILICONE COOLANT HEAVY WALL1/4" . 37 3005 SILICONE COOLANT HEATER SAE 20R3 CLASS A . . . . . . . . . . . . . . . . . . . . . 38 3009 SILCOFLEX SILICONE COOLANT HARD WALL . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 7318 SOFT WALL FUEL FILL SAE 30R7 . . . . . . 31 Marine Coolant, Fuel & Wet Exhaust TYPE 2458 MARINE - Black Cover . . . . . . . . . . 41 2400 WET EXHAUST SAE J2006 . . . . . . . . . . . 39 2428 MARINER PREMIUM WET EXHAUST SAE J2006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 7910 BELLOWSFLEX A COOLANT, MARINE, FUEL . . . . . . . . . . . . . . . . . . . . . . . . . 42 7951 SAE 100R4 HYDRAULIC RETURN/SUCTION . . . . . . . . . . . . . . . . . . . . . 43
MATERIAL HANDLING
CONVERTAPIPE - Black Cover . . . . . . . . . . . . DREDGING SLEEVES . . . . . . . . . . . . . . . . . . . . RADIAL FLEX AIR DUCTING - BLUE . . . . . . . SAND & CEMENT DISCHARGE - Black Cover . SAND SUCTION . . . . . . . . . . . . . . . . . . . . . . . . . TRANSPORTER HOT AIR BLOWER . . . . . . . TRANSPORTER MATERIAL DISCHARGE . . . TRANSPORTER MATERIAL SUCTION . . . . . . TRANSPORTER OIL FIELD VACUUM . . . . . . TRANSPORTER PLASTER & CONCRETE . . TRANSPORTER TYPE 120 DRY CEMENT . . TYPE 101 MATERIAL HANDLING Black Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . TYPE 102 MATERIAL HANDLING . . . . . . . . . . . TYPE 103 EXHAUST - Black Cover . . . . . . . . . . TYPE 105 COLLECTOR - Black Cover . . . . . . . Flexible Connectors & Ends FLEXLOCK CONNECTORS . . . . . . . . . . . . . . FLEXLOCK ENDS (Full Face Flanges) . . . . . . FLEXSEAL CONNECTORS . . . . . . . . . . . . . . FLEXSEAL ENDS (Beaded Ends) . . . . . . . . .
WATER/FIRE
Water BLACK HEAVY-DUTY CONTRACTORS WATER - Coupled . . . . . . . . . . . . . . . . . . . . . . . BLACK HEAVY-DUTY WATER - Coupled . . . . . . BLACK MUNICIPAL WATER - Coupled . . . . . . . GREEN GARDEN - Coupled . . . . . . . . . . . . . . . WASHING MACHINE DRAIN . . . . . . . . . . . . . . . WASHING MACHINE INLET . . . . . . . . . . . . . . . Water Discharge BF-10 PVC WATER DISCHARGE - BLUE . . . . . CASCADE PAPER MILL . . . . . . . . . . . . . . . . . . . NYLAIR 44 WATER DISCHARGE . . . . . . . . . . . PAPER MILL - TYPE 1788 - Gray Cover . . . . . . . PVC WATER DISCHARGE STANDARD DUTY BLUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TRANSPORTER WATER DISCHARGE . . . . . . WD-150 WATER DISCHARGE . . . . . . . . . . . . . . Water Suction PAPER MACHINE SUCTION BOX . . . . . . . . . . . RADIAL FLEX CONTRACTORS . . . . . . . . . . . RADIAL FLEX EXTRA HEAVY DUTY GREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RADIAL FLEX HEAVY DUTY YELLOW . . . . . . RADIAL FLEX STANDARD DUTY CLEAR . . . RADIAL FLEX STANDARD DUTY CLEAR CORRUGATED . . . . . . . . . . . . . . . . . . . . . . . . . RADIAL FLEX STANDARD DUTY CORRUGATED GREEN . . . . . . . . . . . . . . . . . . RADIAL FLEX STANDARD DUTY GREEN . . . TRANSPORTER WATER SUCTION & DISCHARGE . . . . . . . . . . . . . . . . . . . . . . . . . . Washdown DARI-PREEN CREAMERY . . . . . . . . . . . . . . . . . SANI-WHITE WASHDOWN . . . . . . . . . . . . . . Fire ALARM BOOSTER - Thermocure . . . . . . . . . . FIRE EXTINGUISHER - UL92 . . . . . . . . . . . . . . 98 98 99 99 100 100 103 102 101 101 104 104 105 107 108 109 110 108 109 110 107 106 111 111 112 112
PETROLEUM/LPG
Petroleum BOTTOM LOADING . . . . . . . . . . . . . . . . . . . . . . 73 COBRA FUEL OIL DELIVERY . . . . . . . . . . . . 73 FUEL TRANSFER 150 . . . . . . . . . . . . . . . . . . . . 74 HI-VAC CO-AX . . . . . . . . . . . . . . . . . . . . . . . 82 HI-VAC-S CO-AX . . . . . . . . . . . . . . . . . . . . . . 82 HI-VAC WHIP . . . . . . . . . . . . . . . . . . . . . . . . . . 83 PREMIER FARM TANK . . . . . . . . . . . . . . . . . . . . 75 PUMPFLEX I - Softwall . . . . . . . . . . . . . . . . . . . 76 PUMPFLEX II - Hardwall . . . . . . . . . . . . . . . . . . 77 PUMPFLEX II - Jumper . . . . . . . . . . . . . . . . . . 78 PUMPFLEX MARINA - Softwall . . . . . . . . . . . . 78 SUPERLITE HI-FLO CO-AX . . . . . . . . . . . . 79 SUPERLITE HI-FLO WHIP . . . . . . . . . . . . . . 80 SUPERLITE Q CO-AX & SUPERLITE QV (Venturi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 SUPERLITE Q WHIP . . . . . . . . . . . . . . . . . . . . 81 SUPERLITE V (Venturi) . . . . . . . . . . . . . . . . . . 79 TRANSPORTER BLACK TANK TRUCK . . . . . 85 TRANSPORTER EBONITE CORRUGATED TANK TRUCK . . . . . . . . . . . . . . . . . . . . . . . . . . 83 TRANSPORTER EBONITE LT CORRUGATED TANK TRUCK . . . . . . . . . . . . . . . . . . . . . . . . . . 84 TRANSPORTER FLEX-DEVIL . . . . . . . . . . . 86 TRANSPORTER L.W. CORRUGATED TANK TRUCK . . . . . . . . . . . . . . . . . . . . . . . . . . 84 TRANSPORTER RED TANK TRUCK . . . . . . . . 85 TRANSPORTER VAPOR RECOVERY . . . . . . 87 TRANSPORTER X.L.W. CORRUGATED TANK TRUCK . . . . . . . . . . . . . . . . . . . . . . . . . . 87
CHEMICAL
ATLAS ACID DISCHARGE . . . . . . . . . . . . . . . ATLAS ACID SUCTION & DISCHARGE . . . . . COMMANDER ACID DISCHARGE . . . . . . . . . COMMANDER ACID SUCTION & DISCHARGE . . . . . . . . . . . . . . . . . . . . . . . . . . TRANSPORTER CHEMICAL B . . . . . . . . . . . . TRANSPORTER CHEMICAL H . . . . . . . . . . . . TRANSPORTER CHEMICAL V . . . . . . . . . . . . TRANSPORTER MULTI-CHEM . . . . . . . . . . TRANSPORTER ULTRA-CHEM . . . . . . . . . . 45 45 46 46 47 47 48 48 44 49 49 50 51 51
WELDING
SINGLE LINE CORRUGATED WELDING, GRADE R, TYPE S . . . . . . . . . . . . . . . . . . . . . . SINGLE LINE CORRUGATED WELDING, GRADE T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TULINE WELDING, GRADE R . . . . . . . . . . . . . . TULINE WELDING, GRADE R Cut & Coupled (B&B) . . . . . . . . . . . . . . . . . . . . TULINE WELDING, GRADE T . . . . . . . . . . . . . . TULINE WELDING, GRADE T Cut & Coupled (B&B) . . . . . . . . . . . . . . . . . . . . 114 116 113 114 115 116
DOCK LOADING
BLACK RACER OS & D . . . . . . . . . . . . . . . . . CHEMICAL & SOLVENT - UHMW POLYETHYLENE LINING (Smooth Bore) . . . . HY-FLEX 200/275/300 DOCK NYLON/UHMWPE TUBE (Rough Bore) . . . . . . SAFETYFLEX . . . . . . . . . . . . . . . . . . . . . . . . . . SAFETYFLEX WATER JETTING . . . . . . . . . . .
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
GENERAL INFORMATION
6
COMMITMENT TO EXCELLENCE
HBD/Thermoid, Inc. has been the recognized industry leader in spiral hose technology and production innovations for over 30 years. During this time, we developed our unique spiral hose technology, engineered the patented CONCURE continuous manufacturing process and produced billions of feet of spiral reinforced hose products at our various manufacturing facilities. However, it is not production capacity alone that has given HBD/Thermoid, Inc. its position of pre-eminence in the field of industrial, marine and automotive hose and other rubber products. Our strength is, in a great degree, the result of a firm commitment to excellence. This commitment extends to every member of the company...from executive staff to production line worker. It is a point of pride for all. Our personnel are proud of their product and they are proud of our reputation. Our production facilities are models for the industry. Our product research and development is constant, sophisticated and unmatched in expertise and depth of product production knowledge. Quality control is continuous and extends to every facet of our production, packaging and shipping.
AUTOMOTIVE
MARINE
CHEMICAL
AIR/MULTIPURPOSE
DOCK LOADING
FOOD INDUSTRY
MATERIAL HANDLING
SPECIAL APPLICATIONS
STEAM
PETROLEUM/LPG
WATER
FIRE
WELDING
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
GENERAL INFORMATION
Hose Physical Properties After Exposure to Oil Volume Tensile Change Strength Classification Maximum Retained Class A (High Oil Resistance) Class B (Medium-High Oil Resistance) Class C (Medium Oil Resistance) +25% +65% +100% 80% 50% 40%
RMA IP-8 (2002) Specification for Oil Suction and Discharge Hose definitions from section 8.3 for ED and EC hose as follows; Electrically Discontinuous (ED) hose assembly has a maximum allowable resistance of 100 ohms as ascertained by using a 9 volt ohmmeter. Electrically Continuous (EC) hose assembly has a minimum allowable resistance of 25,000 ohms as ascertained by using a 500 volt megger.
Bend Radius
General formula to determine bend length: Angle of Bend x 2r = minimum length of hose to make bend 360 r = given bend radius of hose Example: to make a 90 bend with a hose with a 2" I.D. Given r = 4.5 inches 90 [ 2 x 3.14 x 4.5 ] 360 .25 x 2 x 3.14 x 4.5 = 7" (inches) 7 inches is the minimum length the hose can be bent without damaging it. Remember that the bend should take place over the entire minimum length and not a portion of it. In addition, the formula does not mean that 7 inches will be long enough to meet application needs. It only means that if the 90 bend takes place in less than 7 inches, the hose could be damaged.
* Reprinted with permission from the Rubber Manufacturers Association (RMA) Hose Handbook, RMA/IP-2/2003.
Handbuilt
With over 100 years of design experience, HBD/Thermoid, Inc. is the leader in handcrafted hose. The line is built by an experienced design team, using a computer-aided system that has received worldwide product approvals. This hose line is not your everyday water hose; its one that encompasses products like submarine, rotary and the patented Hy-Flex dock hose.
Spiral
HBD/Thermoids LX-200 production lines now produce a selection of Thermoids most popular hoses in continuous lengths to 200 feet. The most notable example is the Transporter line, which encompasses a wide variety of markets such as petroleum, material handling, chemical and food service.
Thermocure
With this process, HBD/Thermoid has become a potent force in the PED, Fuel Oil Delivery and LP Gas markets with such product lines like the Hi-Vac and Superlite vapor recovery hoses, the Cobra FOD hose and the Type 75 LP Gas hose, just to name a few. The Thermocure process gives these first class products, a showroom quality look.
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Temperature, F
GENERAL INFORMATION
8
STEAM CHART
450
400
Superheated Steam
350
X
300
Hot Water
250
The dotted line shows the process of saturated steam being transformed into superheated steam. If a steam line is at a pressure of 150 psi, and a temperature of 366F, it contains saturated steam. If the pressure is substantially reduced by the expansion of the steam (such as the sudden opening of a valve or the steam passing into a larger pipe or hose), the condition of the steam follows the dotted line to some point X in the superheated steam area. This condition may not last very long, but the superheated steam tends to deteriorate the tube stock in ordinary steam hose intended for use with saturated steam. This usually results in hose failure.
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
GENERAL INFORMATION
When making a selection for this type of application, keep safety in mind. Be sure to select a hose identified as steam hose. There should be a permanent form of branding on the hose and not just on the package. The manufacturers name, hose type and operating pressure should be readable. If not, dont use the hose. Also, be sure to identify the type of service the steam hose will be required to accomplish. What will the temperature of the steam be? Will the steam be superheated (dry) or saturated (wet)? What environment will this hose be used in? Be sure that you can recognize that spillage or accumulations of corrosive materials can have a detrimental effect on the hose cover. Make sure the hose is installed properly by using hose couplings designed for steam service. Check the tightness with each use. Installing and using a shut-off valve between the steam source and the hose will maximize service life and operator safety. Provide operators with adequate clothing which would include rubber boots, gloves, eye protection and full length protective clothing. Do not allow the hose to remain under pressure when not in service. Failure to depressurize and drain the hose when not in service can reduce the usable life of the hose. Continue to monitor hose to ensure it has not deteriorated to the point to where it can no longer provide safe service. Most, if not all steam hoses are date-coded by the manufacturer. It is recommended that assemblies be tagged with a date that it went into service. This information will be helpful in identifying those hoses that should be replaced due to age. Couplings: Hose couplings are extremely important when steam is being handled. High temperatures and pressures inside steam hose act like a pressure cooker and cause the inside and outside diameters to shrink during use. Couplings must be specifically designed to combat this effect. Only couplings designed for steam hose should be used.
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
GENERAL INFORMATION
10
3. Hose to be pressure tested must be restrained by placing steel rods or straps close to each end and at approximate 10 foot (3 m) intervals along its length to keep the hose from "whipping" if failure occurs; the steel rods or straps are to be anchored firmly to the test structure but in such a manner that they do not contact the hose which must be free to move. 4. The outlet end of hose is to be bulwarked so that a blownout fitting will be stopped. 5. Provisions must be made to protect testing personnel from the forces of the pressure media if a failure occurs. 6. Testing personnel must never stand in front of or in back of the ends of a hose being pressure tested. 7. If liquids such as gasoline, oil, solvent, or other hazardous fluids are used as the test fluid, precautions must be taken to protect against fire or other damage should a hose assembly fail and the test liquid be sprayed over the surrounding area.
SAFETY WARNING: Failure to properly follow the manufacturers recommended procedures for the care, maintenance and storage of a particular hose might result in its failure to perform in the manner intended and might result in possible damage to property and serious bodily injury.
General instructions are also described for the proper storage of hose to minimize deterioration from exposure to elements or environments which are known to be deleterious to rubber products. Proper storage conditions can enhance and extend substantially the ultimate life of hose products.
STORAGE
Rubber hose products in storage can be affected adversely by temperature, humidity, ozone, sunlight, oils, solvents, corrosive liquids and fumes, insects, rodents and radioactive materials. The appropriate method for storing hose depends to a great extent on its size (diameter and length), the quantity to be stored, and the way in which it is packaged. Hose should not be piled or stacked to such an extent that the weight of the stack creates distortions on the lengths stored at the bottom. Since hose products vary considerably in size, weight, and length, it is not practical to establish definite recommendations on this point. Hose having a very light wall will not support as much load as could a hose having a heavier wall or hose having a wire reinforcement. Hose which is shipped in coils or bales should be stored so that the coils are in a horizontal plane. Whenever feasible, rubber hose products should be stored in their original shipping containers, especially when such containers are wooden crates or cardboard cartons which provide some protection against the deteriorating effects of oils, solvents, and corrosive liquids; shipping containers also afford some protection against ozone and sunlight. Certain rodents and insects will damage rubber hose products, and adequate protection from them should be provided. Cotton jacketed hose should be protected against fungal growths if the hose is to be stored for prolonged periods in humidity conditions in excess of 70%. The ideal temperature for the storage of rubber products ranges from 50 to 70F (10 -21C) with a maximum limit of 100F (38C). If stored below 32F (0C), some rubber products become stiff and would require warming before being placed in service. Rubber products should not be stored near sources of heat, such as radiators, base heaters, etc., nor should they be stored under conditions of high or low humidity. To avoid the adverse effects of high ozone concentration, rubber hose products should not be stored near electrical equipment that may generate ozone or be stored for any lengthy period in geographical areas of known high ozone concentration. Hose should not be stored in locations where the ozone level exceeds the National Institute of Occupational Safety and Healths upper limit of 0.10 ppm. Exposure to direct or reflected sunlight even through windows should also be avoided. Uncovered hose should not be stored under fluorescent or mercury lamps which generate light waves harmful to rubber. Storage areas should be relatively cool and dark, and free of dampness and mildew. Items should be stored on a first-in, first-out basis, since even under the best of conditions, an unusually long shelf life could deteriorate certain rubber products.
SAFETY WARNING: Before conducting any pressure tests on hose, provision must be made to ensure the safety of the personnel performing the tests and to prevent any possible damage to property. Only trained personnel using proper tools and procedures should conduct any pressure tests. 1. Air or any other compressible gas must never be used as the test media because of the explosive action of the gas should a failure occur. Such a failure might result in possible damage to property and serious bodily injury. 2. Air should be removed from the hose by bleeding it through an outlet valve while the hose is being filled with the test medium.
*Woven jacket fire hose should be tested in accordance with the service test provisions contained in the current edition of National Fire Protection Association Bulletin No. 1962 Standard for the Care, Use and Service Testing of Fire Hose.
* Reprinted with permission from the Rubber Manufacturers Association (RMA) Hose Handbook, RMA/IP-2/2003.
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
GENERAL INFORMATION
HOSE TESTING
SAFETY WARNING: Testing can be dangerous and should be done only by trained personnel using proper tools and procedures. Failure to follow such procedures might result in damage to property and/or serious bodily injury.
The Rubber Manufacturers Association (RMA) recognizes, accepts and recommends the testing methods of the American Society for Testing and Materials (ASTM). Unless otherwise specified, all hose tests are to be conducted in accordance with ASTM Method No. D-380 (latest version). Where an ASTM D-380 test is not available, another test method should be selected and described in detail. RMA participates with ASTM under the auspices of the American National Standards Institute (ANSI) in Technical Committee 45 (TC45) of The International Organization for Standardization (ISO) in developing both hose product and hose test method standards. Many of the hose test method standards published by ISO duplicate or closely parallel those shown in ASTM D-380. Many are unique and, in those cases, the RMA may be able to provide the necessary test standard references which may be purchased from the American National Standards Institute (ANSI).
b.
With some type of hose, it is useful to know how a hose will act under pressure. All change in length tests, except when performed on wire braid or wire spiralled hose, are made with original length measurements taken under a pressure of 10 psi (0.069 MPa). The specified pressure, which is normally the proof pressure, is applied and immediate measurement of the characteristics desired are taken and recorded. Percent length change (elongation or contraction) is the difference between the length at 10 psi (0.069 MPa) (except wire braided or wire spiralled) and that at the proof pressure times 100 divided by the length at 10 psi (0.069 MPa). Elongation occurs if the length of the hose under the proof pressure is greater than at a pressure of 10 psi (0.069 MPa). Contraction occurs if the length at the proof pressure is less than at 10 psi (0.069 MPa). In testing wire braided or spiralled hose, the proof pressure is applied and the length recorded. The pressure is then released and, at the end of 30 seconds, the length is measured; the measurement obtained is termed the original length.
c.
Percent change in outside diameter or circumference is the difference between the outside diameter or circumference at 10 psi (0.069 MPa) and that obtained under the proof pressure times 100 divided by the outside diameter or circumference at 10 psi (0.069 MPa). Expansion occurs if the measurement at the proof pressure is greater than at 10 psi (0.069 MPa). Contraction occurs if the measurement at the proof pressure is less than at 10 psi (0.069 MPa). Warp is the deviation from a straight line drawn from fitting to fitting; the maximum deviation from this line is warp. First, a measurement is taken at 10 psi (0.069 MPa) and then again at the proof pressure. The difference between the two, in inches, is the warp. Normally, this is a feature measured on woven jacket fire hose only. Rise is a measure of the height a hose rises from the surface of the test table while under pressure. The difference between the rise at 10 psi (0.069 MPa) and at the proof pressure is reported to the nearest 0.25 inch (6.4 mm). Normally, this is a feature measured on woven jacket fire hose only. Twist is a rotation of the free end of the hose while under pressure. A first reading is taken at 10 psi (0.069 MPa) and a second reading at proof pressure. The difference, in degrees, between the 10 psi (0.069 MPa) base and that at the proof pressure is the twist. Twist is reported as right twist (to tighten couplings) or left twist. Standing at the pressure inlet and looking toward the free end of a hose, a clockwise turning is right twist and counterclockwise is left twist. Kink test is a measure of the ability of woven jacket hose to withstand a momentary pressure while the hose is bent back sharply on itself at a point approximately 18 inches (457 mm) from one end. Test is made at pressures ranging from 62% of the proof pressure on sizes 3 inches (76 mm) and 3.5 inches (89 mm) to 87% on sizes under 3 inches (76 mm). This is a test applied to woven jacket fire hose only. Volumetric expansion test is applicable only to specific types of hose, such as hydraulic or power steering hose, and is a measure of its volumetric expansion under ranges of internal pressure.
e.
f.
Non-Destructive Tests Non-destructive tests are conducted on a full length of a hose or hose assembly. These tests are for the purpose of eliminating hose with defects which cannot be seen by visual examination or in order to determine certain characteristics of the hose while it is under internal pressure. a. A proof pressure test is normally applied to hose for a specified period of time. On new hose, the proof pressure is usually 50% of the minimum specified burst except for woven jacket fire hose where the proof pressure is twice the service test pressure marked on the hose (67% of specified minimum burst). Hydrostatic tests performed on fire hose in service should be no higher than the service test pressure referred to above. The regulation of these pressures is extremely important so that no deteriorating stresses will be applied, thus weakening a normal hose.
h.
11
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
GENERAL INFORMATION
12
DESIGN CONSIDERATIONS
In designing hose, it is customary to develop a design ratio, which is a ratio between the minimum burst and the maximum working pressure. Burst test data is compiled and the minimum value is established by accepted statistical techniques. This is done as a check on theoretical calculations, based on the strength of reinforcing materials and on the characteristics of the method of fabrication. Minimum burst values are used as one factor in the establishment of a reasonable and safe maximum working pressure. MAXIMUM WORKING PRESSURE IS ONE OF THE ESSENTIAL OPERATING CHARACTERISTICS THAT A HOSE USER MUST KNOW AND RESPECT TO ASSURE SATISFACTORY SERVICE AND OPTIMUM LIFE. It should be noted that design ratios are dependent on more than the minimum burst. The hose technologist must anticipate natural decay in strength of reinforcing materials, and the accelerated decay induced by the anticipated environments in which the hose will be used and the dynamic situations that a hose might likely encounter in service. Including all considerations, the following recommended design ratios are given for newly manufactured hose: 1. 2. Water Hose up to 150 psi WP: 3:1 Hose for all other liquids, solid materials suspended in liquids or air, and water hose over 150 psi WP: 4:1 Hose for compressed air and other gases: 4:1 Hose for liquid media that immediately changes into gas under standard atmospheric conditions: 5:1 Steam Hose: 10:1
INFORMATION NEEDED
Hose Dimensions (a) I.D. (b) O.D. (c) Length (state whether overall length or length excluding couplings) (d) Tolerance limitations (if normal RMA tolerances cannot be used) Types of Service (a) Material to be conveyed through hose 1. Chemical name 2. Concentration 3. Temperature extremes (low and high) 4. Solids, description and size (b) Working pressure (including surge) (c) Suction or vacuum requirements (d) Velocity (e) Flow Rate Operating Conditions (a) Intermittent or continuous service (b) Indoor and outdoor use (c) Movement and geometry of use (d) Flexibility Minimum bend radius (e) External conditions 1. Abrasion 2. Oil (Specify type) 3. Solvents (Specify type) 4. Acid (Specify type and concentration) 5. Temperature Range Normal Highest Lowest 6. Ozone
3. 4. 5.
* Reprinted with permission from the Rubber Manufacturers Association (RMA) Hose Handbook, RMA/IP-2/2003.
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
GENERAL INFORMATION
Uncoupled Hose (a) Bulk or cut to length (b) Ends 1. Straight or enlarged 2. Capped or raw (uncapped) 3. Soft ends or wire to end Coupled Hose, Fittings (a) Factory applied (b) Field applied (c) Type of Fitting 1. Type of thread 2. Male or female 3. Reusable/field attachable 4. Non-reusable (d) Material for Fittings 1. ANSI (or SAE or ASTM) metal composition specifications Hose with Built-in Fittings (a) Ends 1. Threaded (type of thread) 2. Grooved 3. Beveled for welding 4. Integral flange (b) Flanges 1. Type (threaded, slip-on, welding neck, lap joint) 2. Pressure rating 3. Drilling (c) Materials and Dimensions 1. ANSI (or SAE or ASTM) composition and specifications 2. Treatment for specific services Hose Now in Use (a) Type of hose (b) Service life being obtained and description of failure (c) Service life desired Special Requirements or Properties (a) Electrical and static conductive (b) Flame resistant (c) Sub-zero exposure (d) Non-contaminating to material
Common Name CPE Neoprene** Hypalon Hydrin Ethylene Propoylene Rubber Fluoroelastomer Viton Butyl Polyisoprene Buna N, Nitrile Natural Rubber SBR Ultra-High Molecular Weight Polyethylene Cross-Linked Polyethylene
Composition Chloronated Polyethylene Chloroprene Chloro-sulfonyl-polyethylene Ethylene oxide and Chloromethyl oxirane Ethylene-propylene-diene-terpolymer Hexafluoropropylene vinylidene fluoride Isobutylene-isoprene Isoprene, synthetic Nitrile-butadiene Isoprene, natural Styrene-butadiene Polyethylene Polyethylene and cross-linking agent
13
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
14
VALUFLEX/GS RED
Valuflex/GS is one of the finest multipurpose air and water hose available, anywhere. Red Valuflex provides job/color coding possibilities for safety and other considerations. Valuflex is a very economical general service air and water hose. It can be used in numerous industrial, agricultural and construction applications where oil is not a factor. Valuflex is easy to handle and very flexible due to its multi-spiral layers of durable reinforcing polyester yarn. Available in a wide variety of sizes, Valuflex provides constant working pressures of 150, 200, 250, or 300 psi. It has an EPDM tube and cover that resists abrasion, heat and ozone. This hose is not for use as a steam hose.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Red Limited EPDM EPDM Spiral polyester yarn -40F to +200F -40C to +93C Reels or 50 ft. length 1 per carton
Min. Bend Radius (inches) (mm) 1.50 1.50 1.50 1.50 2.00 2.00 2.25 2.25 2.25 2.25 2.25 2.25 3.00 3.00 3.00 3.00 3.75 3.75 3.75 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 7.00 7.00 8.75 10.50 14.00 38.10 38.10 38.10 38.10 50.80 50.80 57.15 57.15 57.15 57.15 57.15 57.15 76.20 76.20 76.20 76.20 95.25 95.25 95.25 114.30 114.30 114.30 114.30 114.30 114.30 114.30 114.30 177.80 177.80 222.25 266.70 355.60 Weight (lb/ft) (Kg/m) 0.09 0.09 0.12 0.16 0.12 0.14 0.16 0.16 0.16 0.17 0.18 0.18 0.20 0.25 0.25 0.25 0.24 0.30 0.30 0.34 0.34 0.38 0.38 0.38 0.38 0.41 0.41 0.43 0.51 0.81 0.95 1.13 0.13 0.13 0.18 0.24 0.18 0.21 0.24 0.24 0.24 0.25 0.27 0.27 0.30 0.37 0.37 0.37 0.36 0.45 0.45 0.51 0.51 0.57 0.57 0.57 0.57 0.61 0.61 0.64 0.76 1.21 1.41 1.68
Product Number 00114504100v 00114504200 00114504300 00114504400 00114505200 00114505400 00114506100v 00114506200 00114506251 00114506300 00114506400 00114506451 00114508100 00114508200 00114508300 00114508400 00114510100 00114510200 00114510400 00114512100 00114512151v 00114512200 00114512251 00114512500 00114512550 00114512400 00114512451 00114516200 00114516300 00114520100 00114524100 00114532100
Nominal I.D. (inches) (mm) 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1-1/4 1-1/2 2 6.35 6.35 6.35 6.35 7.94 7.94 9.53 9.53 9.53 9.53 9.53 9.53 12.70 12.70 12.70 12.70 15.88 15.88 15.88 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 25.40 25.40 31.75 38.10 50.80
Nominal O.D. (inches) (mm) 0.49 0.49 0.56 0.62 0.58 0.62 0.68 0.68 0.68 0.69 0.71 0.71 0.81 0.81 0.84 0.84 0.93 1.00 1.00 1.12 1.12 1.15 1.15 1.15 1.15 1.15 1.15 1.37 1.37 1.75 2.00 2.55 12.45 12.45 14.22 15.75 14.73 15.75 17.27 17.27 17.27 17.46 18.03 18.03 20.64 20.64 21.43 21.43 23.62 25.40 25.40 28.45 28.45 29.21 29.21 29.21 29.21 29.21 29.21 34.80 34.80 44.45 50.80 64.77
Reinforcement Spirals 2 2 4 4 2 4 2 2 2 4 4 4 2 2 4 4 2 2 4 2 2 4 4 4 4 4 4 4 4 4 4 4
Working Pressure (psi) (Mpa) 150 200 250 300 200 300 150 200 200 250 300 300 150 200 250 300 150 200 300 150 150 200 200 250 250 300 300 150 200 150 150 150 1.03 1.38 1.72 2.07 1.38 2.07 1.03 1.38 1.38 1.72 2.07 2.07 1.03 1.38 1.72 2.07 1.03 1.38 2.07 1.03 1.03 1.38 1.38 1.72 1.72 2.07 2.07 1.03 1.38 1.03 1.03 1.03
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
VALUFLEX/GS BLACK
Valuflex/GS is one of the finest multipurpose air and water hose available, anywhere. Black Valuflex provides job/color coding possibilities for safety and other considerations. Valuflex is a very economical general service air and water hose. It can be used in numerous industrial, agricultural and construction applications where oil is not a factor. Valuflex is easy to handle and very flexible due to its multi-spiral layers of durable reinforcing polyester yarn. Available in a wide variety of sizes, Valuflex provides constant working pressures of 150, 200, 250 or 300 psi. It has an EPDM tube and cover that resists abrasion, heat and ozone. This hose is not for use as a steam hose.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Limited EPDM EPDM Spiral polyester yarn -40F to +200F -40C to +93C Reels or 50 ft. length 1 per carton
Working Pressure (psi) (Mpa) 150 200 250 300 200 300 150 200 250 300 150 200 250 300 150 200 300 150 150 200 200 250 300 300 150 200 300 150 150 150 1.03 1.38 1.72 2.07 1.38 2.07 1.03 1.38 1.72 2.07 1.03 1.38 1.72 2.07 1.03 1.38 2.07 1.03 1.03 1.38 1.38 1.72 2.07 2.07 1.03 1.38 2.07 1.03 1.03 1.03 Min. Bend Radius (inches) (mm) 1.50 1.50 1.50 1.50 2.00 2.00 2.25 2.25 2.25 2.25 3.00 3.00 3.00 3.00 3.75 3.75 3.75 4.50 4.50 4.50 4.50 4.50 4.50 4.50 7.00 7.00 7.00 8.75 10.50 14.00 38.10 38.10 38.10 38.10 50.80 50.80 57.15 57.15 57.15 57.15 76.20 76.20 76.20 76.20 95.25 95.25 95.25 114.30 114.30 114.30 114.30 114.30 114.30 114.30 177.80 177.80 177.80 222.25 266.70 355.60 Weight (lb/ft) (Kg/m) 0.08 0.08 0.12 0.15 0.11 0.13 0.15 0.15 0.16 0.17 0.19 0.24 0.24 0.24 0.23 0.29 0.29 0.33 0.33 0.36 0.36 0.36 0.40 0.40 0.41 0.49 0.49 0.79 0.90 1.08 0.12 0.12 0.18 0.22 0.16 0.19 0.22 0.22 0.24 0.25 0.28 0.36 0.36 0.36 0.34 0.43 0.43 0.49 0.49 0.54 0.54 0.54 0.60 0.60 0.61 0.73 0.73 1.18 1.34 1.61
Product Number 00114604100v 00114604200 00114604300v 00114604400 00114605200 00114605400 00114606100v 00114606200 00114606300v 00114606400 00114608100 00114608200 00114608300v 00114608400 00114610100 00114610200 00114610400 00114612100 00114612151v 00114612200 00114612251v 00114612300v 00114612400 00114612454v 00114616100 00114616200 00114616400 00114620100 00114624100 00114632100
Nominal I.D. (inches) (mm) 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1-1/4 1-1/2 2 6.35 6.35 6.35 6.35 7.94 7.94 9.53 9.53 9.53 9.53 12.70 12.70 12.70 12.70 15.88 15.88 15.88 19.05 19.05 19.05 19.05 19.05 19.05 19.05 25.40 25.40 25.40 31.75 38.10 50.80
Nominal O.D. (inches) (mm) 0.49 0.49 0.56 0.62 0.58 0.62 0.68 0.68 0.69 0.71 0.81 0.81 0.84 0.84 0.93 1.00 1.00 1.12 1.12 1.15 1.15 1.15 1.15 1.15 1.37 1.37 1.43 1.75 2.00 2.55 12.45 12.45 14.22 15.75 14.73 15.75 17.27 17.27 17.46 18.03 20.64 20.64 21.43 21.43 23.62 25.40 25.40 28.45 28.45 29.21 29.21 29.21 29.21 29.21 34.80 34.80 36.32 44.45 50.80 64.77
Reinforcement Spirals 2 2 4 4 2 4 2 2 4 4 2 2 4 4 2 2 4 2 2 4 4 4 4 4 4 4 4 4 4 4
15
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
16
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Green, Yellow or Blue Limited EPDM EPDM Spiral polyester yarn -40F to +200F -40C to +93C Reels or 50 ft. length 1 per carton
Working Pressure (psi) (Mpa) 250 250 300 250 300 250 300 250 300 250 250 250 250 250 250 1.73 1.73 2.07 1.73 2.07 1.73 2.07 1.73 2.07 1.73 1.73 1.73 1.73 1.73 1.73 Min. Bend Radius (inches) (mm) 2.25 3.00 3.00 4.50 4.50 4.50 4.50 7.00 7.00 4.50 4.50 3.00 4.50 4.50 7.00 57.15 76.20 76.20 114.30 114.30 114.30 114.30 177.80 177.80 114.30 114.30 76.20 114.30 114.30 177.80 Weight (lb/ft) (Kg/m) 0.18 0.25 0.25 0.37 0.41 0.37 0.41 0.54 0.54 0.37 0.37 0.25 0.37 0.37 0.54 0.27 0.37 0.37 0.55 0.61 0.55 0.61 0.80 0.80 0.55 0.55 0.37 0.55 0.55 0.80
Product Number Green 00114806300 00114808300 00114808400v 00114812500 00114812400 00114812551 00114812455 00114816300v 00114816400 Yellow 00114912356v 00114912351v Blue 00115008300v 00115012300 00115012355 00115016300
Nominal I.D. (inches) (mm) 3/8 1/2 1/2 3/4 3/4 3/4 3/4 1 1 3/4 3/4 1/2 3/4 3/4 1 9.53 12.70 12.70 19.05 19.05 19.05 19.05 25.40 25.40 19.05 19.05 12.70 19.05 19.05 25.40
Nominal O.D. (inches) (mm) 0.69 0.84 0.84 1.15 1.15 1.15 1.15 1.43 1.43 1.15 1.15 0.84 1.15 1.15 1.43 17.53 21.34 21.34 29.21 29.21 29.21 29.21 36.20 36.20 29.21 29.21 21.43 29.21 29.21 36.20
Reinforcement Spirals 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
MAINLINER
Mainliner is designed to handle the oily mists used to lubricate pneumatic tools. This hose is an excellent choice for use with pneumatic tools throughout the industry. It features a medium oil-resistant tube with multi-spiral polyester reinforcement that keeps it flexible even in extreme temperatures. The durable cover resists abrasion, cracking, weathering and ozone. Mainliner offers constant working pressures of 200, 250 and 300 psi. Mainliner is the quality value choice for a general service hose for oily, pneumatic equipment lubrication. Note: Not recommended for handling fuels.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Red Medium EPDM, RMA Class C EPDM - Limited Spiral polyester yarn -40F to +200F -40C to +93C Reels or 50 ft. length 1 per carton
Min. Bend Radius (inches) (mm) 1.50 1.50 2.00 2.25 2.25 3.00 3.00 3.75 4.50 4.50 4.50 4.50 7.00 7.00 8.75 10.50 14.00 38.10 38.10 50.80 57.15 57.15 76.20 76.20 95.25 114.30 114.30 114.30 114.30 177.80 177.80 222.25 266.70 355.60 Weight (lb/ft) (Kg/m) 0.09 0.15 0.14 0.15 0.18 0.19 0.25 0.30 0.37 0.37 0.37 0.37 0.42 0.50 0.81 0.94 1.12 0.13 0.22 0.21 0.22 0.27 0.28 0.37 0.45 0.55 0.55 0.55 0.55 0.62 0.74 1.21 1.40 1.67
Product Number 00225504200v 00225504400 00225505400 00225506200v 00225506400 00225508200v 00225508400 00225510400 00225512300 00225512351v 00225512400 00225512451 00225516200v 00225516400 00225520200 00225524200 00225532200
Nominal I.D. (inches) (mm) 1/4 1/4 5/16 3/8 3/8 1/2 1/2 5/8 3/4 3/4 3/4 3/4 1 1 1-1/4 1-1/2 2 6.35 6.35 7.94 9.53 9.53 12.70 12.70 15.88 19.05 19.05 19.05 19.05 25.40 25.40 31.75 38.10 50.80
Nominal O.D. (inches) (mm) 0.49 0.62 0.62 0.68 0.71 0.81 0.84 1.00 1.15 1.15 1.15 1.15 1.37 1.43 1.75 2.00 2.55 12.45 15.75 15.75 17.27 18.03 20.64 21.34 25.40 29.21 29.21 29.21 29.21 34.80 36.20 44.45 50.80 64.77
Reinforcement Spirals 2 4 4 2 4 2 4 4 4 4 4 4 4 4 4 4 4
Working Pressure (psi) (Mpa) 200 300 300 200 300 200 300 300 250 250 300 300 200 300 200 200 200 1.38 2.07 2.07 1.38 2.07 1.38 2.07 2.07 1.72 1.72 2.07 2.07 1.38 2.07 1.38 1.38 1.38
AIRFLEX
Airflex hose is the quality choice for any application where a medium oil resistant tube is needed to lubricate air tools. Airflex has a working pressure to 300 psi in a full range of sizes from 1/4" I.D. to 3/4" I.D. It has a highly visible yellow cover that is weather, ozone and abrasion resistant. Airflex has a durable 4-spiral construction to handle abuse oriented applications and a yellow cover for coding applications. Stock the quality choice, the right choice, the highly visible, Airflex hose.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Yellow Medium EPDM, RMA Class C EPDM - Limited Spiral polyester yarn -40F to +200F -40C to +93C Reels or 50 ft. length 1 per carton
Min. Bend Radius (inches) (mm) 1.50 2.25 3.00 4.50 4.50 38.10 57.15 76.20 114.30 114.30 Weight (lb/ft) (Kg/m) 0.15 0.18 0.25 0.37 0.37 0.22 0.27 0.37 0.55 0.55
Nominal I.D. (inches) (mm) 1/4 3/8 1/2 3/4 3/4 6.35 9.53 12.70 19.05 19.05
Nominal O.D. (inches) (mm) 0.62 0.71 0.84 1.15 1.15 15.75 18.03 21.34 29.21 29.21
Reinforcement Spirals 4 4 4 4 4
Working Pressure (psi) (Mpa) 300 300 300 300 300 2.07 2.07 2.07 2.07 2.07
17
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
18
DURA-RED
Dura-Red is the premium non-conductive multipurpose hose that handles oil mist, air, water and mild chemicals. Not recommended for fuels. Meets electrical resistance portion of the Alcoa Potroom air and water specs (30.4.2). Dura-Red has 4-spiral, 300 psi construction to handle abuse oriented applications.
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Product Number 00275504400v 00275506400 00275508400 00275512400 00275512451v 00275516400 00275520300v Nominal I.D. (inches) (mm) 1/4 3/8 1/2 3/4 3/4 1 1-1/4 6.35 9.53 12.70 19.05 19.05 25.40 31.75 Nominal O.D. (inches) (mm) 0.62 0.71 0.84 1.15 1.15 1.43 1.75 15.75 18.03 21.34 29.21 29.21 36.20 44.45 Reinforcement Spirals 4 4 4 4 4 4 4
Resistance:
Branding: Thermoid Dura-Red Non-conductive Size PSI WP Made In USA Red Medium Non-conductive EPDM, RMA Class C EPDM Class C Spiral polyester yarn -40F to +200F -40C to +93C Reels or 50 ft. length 1 per carton (3/4" I.D. only)
Min. Bend Radius (inches) (mm) 1.50 2.25 3.00 4.50 4.50 7.00 8.75 38.10 57.15 76.20 114.30 114.30 177.80 222.25 Weight (lb/ft) (Kg/m) 0.16 0.18 0.25 0.38 0.38 0.51 0.72 0.24 0.27 0.37 0.57 0.57 0.76 1.07
Working Pressure (psi) (Mpa) 300 300 300 300 300 300 300 2.07 2.07 2.07 2.07 2.07 2.07 2.07
MAXECON/GP
Maxecon is an excellent general purpose air and water service hose that can be used by all industries. It is non-conductive and offers a medium-high oil resistance. Maxecon offers dependable and solid performance with two working pressures: 250 or 300 psi in varying sizes up to 1-1/2" I.D. Its durable cover resists abrasion, weathering and ozone. Maxecons multi-spiral polyester yarn reinforcement makes this hose durable, flexible and helps eliminate kinks. Maxecon is the ideal hose for use in mining, steel or petroleum applications. Note: Not recommended for fuel applications.
Resistance:
Branding: Thermoid Maxecon /GP Non-conductive Size PSI WP Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Red Cover (Medium) Tube (High) Non-conductive Nitrile blend, RMA Class A Nitrile blend, RMA Class B Spiral polyester yarn -20F to +160F or 180F (intermittent) -29C to +71C or 82C (intermittent) Reels or 50 ft. length 1 per carton (3/4" I.D. only)
Min. Bend Radius (inches) (mm) 1.50 1.50 2.00 2.25 2.25 3.00 3.00 3.75 4.50 4.50 4.50 7.00 7.00 8.75 10.50 38.10 38.10 50.80 57.15 57.15 76.20 76.20 95.25 114.30 114.30 114.30 177.80 177.80 222.25 266.70 Weight (lb/ft) (Kg/m) 0.08 0.13 0.14 0.17 0.17 0.24 0.24 0.28 0.36 0.40 0.40 0.49 0.58 0.78 0.90 0.12 0.19 0.21 0.25 0.25 0.36 0.36 0.42 0.54 0.60 0.60 0.73 0.86 1.16 1.34
Product Number 00336504300 00336504400 00336505300 00336506300 00336506400 00336508300 00336508400 00336510400 00336512300 00336512400 00336512454 00336516300 00336516400 00336520300 00336524300
Nominal I.D. (inches) (mm) 1/4 1/4 5/16 3/8 3/8 1/2 1/2 5/8 3/4 3/4 3/4 1 1 1-1/4 1-1/2 6.35 6.35 7.94 9.53 9.53 12.70 12.70 15.88 19.05 19.05 19.05 25.40 25.40 31.75 38.10
Nominal O.D. (inches) (mm) 0.50 0.62 0.63 0.69 0.71 0.84 0.84 1.00 1.15 1.15 1.15 1.43 1.43 1.78 2.03 12.70 15.75 15.88 17.53 18.03 21.34 21.34 25.40 29.21 29.21 29.21 36.20 36.20 45.24 51.59
Reinforcement Spirals 2 4 2 4 4 4 4 4 4 4 4 4 4 4 4
Working Pressure (psi) (Mpa) 250 300 250 250 300 250 300 300 250 300 300 250 300 250 250 1.72 2.07 1.72 1.72 2.07 1.72 2.07 2.07 1.72 2.07 2.07 1.72 2.07 1.72 1.72
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
VERSICON
Versicon is a premium, non-conductive hose designed to stand up to the tough working conditions found in shipyards, steel processing automotive plants and construction industries. The NBR tube can convey oil, diesel, kerosene, fuel oil and other petroleum based products. Its 4-spiral polyester reinforcing cords provide strength and flexibility even in extreme temperatures. The synthetic cover resists oil and solvents and also cracking, abrasion and ozone. Versicon meets the standard for conductivity which makes it ideal for the aluminum reduction industry as well as other applications where a high degree of electrical non-conductivity is required. Versicon provides smooth, easy handling and offers a constant pressure of either 250 or 300 psi 1/4" through the 1-1/2" sizes. Versicon is kink resistant, crush proof and is the ideal choice for harsh, demanding applications. Note: Not recommended for a variety of unleaded gasoline.
Product Number 00447504400 00447506400 00447508400 00447512400 00447516400 00447520300 00447524300 Nominal I.D. (inches) (mm) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 6.35 9.53 12.70 19.05 25.40 31.75 38.10 Nominal O.D. (inches) (mm) 0.62 0.71 0.84 1.15 1.43 1.78 2.03 15.75 18.03 21.34 29.21 36.20 45.24 51.59
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Red High Non-conductive NBR, RMA Class A Nitrile/PVC Class A Spiral polyester yarn -20F to +180F -29C to +82C Reels
Reinforcement Spirals 4 4 4 4 4 4 4
Working Pressure (psi) (Mpa) 300 300 300 300 300 250 250 2.07 2.07 2.07 2.07 2.07 1.72 1.72
Min. Bend Radius (inches) (mm) 1.50 2.25 3.00 4.50 7.00 8.75 10.50 38.10 57.15 76.20 114.30 177.80 222.25 266.70
Weight (lb/ft) (Kg/m) 0.16 0.18 0.25 0.42 0.63 0.81 0.95 0.24 0.27 0.37 0.62 0.94 1.21 1.41
MAXECON PLUS
Maxecon Plus is a premium, quality non-conductive hose. It is rated high in oil resistance and can be used to convey oil, fuel oil, diesel, kerosene and other petroleum derived products. Maxecon Plus provides dependable and solid performance with a working pressure of 300 psi to 1" I.D. Its durable oil and solvent resistant brown cover also stands up to abrasion, weathering and ozone. Maxecons multi-spiral polyester yarn reinforcement makes this hose strong, flexible and helps eliminate kinks. Maxecon Plus is the ideal hose for use in mining, steel or petroleum industrial applications. Note: Not recommended for a variety of unleaded gasoline.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Brown High Non-conductive NBR, RMA Class A NBR/PVC RMA Class A Spiral polyester yarn -20F to +180F -29C to +82C Reels
Min. Bend Radius (inches) (mm) 1.50 2.25 3.00 4.50 7.00 38.10 57.15 76.20 114.30 177.80 Weight (lb/ft) (Kg/m) 0.16 0.18 0.25 0.42 0.61 0.24 0.27 0.37 0.62 0.91
Nominal I.D. (inches) (mm) 1/4 3/8 1/2 3/4 1 6.35 9.53 12.70 19.05 25.40
Nominal O.D. (inches) (mm) 0.62 0.71 0.84 1.15 1.43 15.75 18.03 21.34 29.21 36.20
Reinforcement Spirals 4 4 4 4 4
Working Pressure (psi) (Mpa) 300 300 300 300 300 2.07 2.07 2.07 2.07 2.07
19
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
20
Resistance:
Cover Color: Oil Resistance: Contruction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black High Non-conductive NBR, RMA Class A NBR/PVC RMA Class A Spiral polyester yarn -20F to +180F -29C to +82C Reels
Min. Bend Radius (inches) (mm) 1.50 2.25 3.00 4.50 7.00 38.10 57.15 76.20 114.30 177.80 Weight (lb/ft) (Kg/m) 0.16 0.18 0.25 0.42 0.60 0.24 0.27 0.37 0.62 0.89
Nominal I.D. (inches) (mm) 1/4 3/8 1/2 3/4 1 6.35 9.53 12.70 19.05 25.40
Nominal O.D. (inches) (mm) 0.62 0.71 0.84 1.15 1.43 15.75 18.03 21.34 29.21 36.20
Reinforcement Spirals 4 4 4 4 4
Working Pressure (psi) (Mpa) 300 300 300 300 300 2.07 2.07 2.07 2.07 2.07
GOLDENAIR
Goldenair is an excellent general purpose hose for air, petroleum products and nitrogen service. Designed for the harsh conditions found in steel mills, shipyards, foundries, auto plants and construction sites, Goldenair resists weathering, ozone and abrasion. Goldenair provides a constant working pressure to 350 psi in 3/4" size and is kink resistant. This premium quality hose is non-conductive. It has a tough, durable cover that resists oils and other solvents. Its 4-spiral polyester yarn reinforcement provides added strength and flexibility even in the most extreme conditions. Note: Not recommended for a variety of unleaded gasoline.
Resistance:
Branding: Thermoid Versicon/Goldenair Non-conductive Size PSI WP Made In USA (For Nitrogen Use)
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Yellow High Non-conductive NBR, RMA Class A NBR/PVC RMA Class A Spiral polyester yarn -20F to +180F -29C to +82C Reels
Min. Bend Radius (inches) (mm) 4.50 7.00 114.30 177.80 Weight (lb/ft) (Kg/m) 0.38 0.61 0.57 0.91
Reinforcement Spirals 4 4
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
GREEN GP/OXYGEN
Green GP/Oxygen hose is designed to handle the harsh, abusive conditions found in steel producing and oil refinery environments. The green cover is commonly color coded for oxygen in mills. It features a medium-high oil resistant NBR blend tube with a 4-spiral polyester yarn reinforcement. The high oil resistant cover and a constant working pressure of 300 psi make this tough, heavy-duty hose the ideal choice for industrial use. Note:This hose is not recomended for fuel or air breathing applications.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Green Medium-High NBR blend, RMA Class B NBR/PVC, RMA Class B Spiral polyester yarn -20F to +180F -29C to +82C Reels
Min. Bend Radius (inches) (mm) 2.25 3.00 4.50 57.15 76.20 114.30 Weight (lb/ft) (Kg/m) 0.29 0.29 0.39 0.43 0.43 0.58
Nominal I.D. (inches) (mm) 3/8 1/2 3/4 9.53 12.70 19.05
Nominal O.D. (inches) (mm) 0.88 0.94 1.16 22.23 23.81 29.37
Reinforcement Spirals 4 4 4
Working Pressure (psi) (Mpa) 300 300 300 2.07 2.07 2.07
RADIAL AIRE
Radial Aire is a premium, multipurpose PVC air hose used across industry. Radial Aire is a medium-high resistant hose and offers an operating temperature range between -10F and +150F. Radial Aire provides smooth, solid performance and offers constant working pressure of 250 or 300 psi. It features a durable PVC cover and tube with a 2-spiral polyester reinforcing cords that help keep the hose kink resistant and flexible.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Blue or Red Medium-High PVC, RMA Class B PVC, RMA Class B Spiral polyester yarn -10F to +150F -23C to +66C Reels or coupled lengths
Min. Bend Radius (inches) (mm) 1.50 2.00 2.25 3.00 3.75 4.50 1.50 2.00 2.25 3.00 3.75 4.50 38.10 50.80 57.15 76.20 95.25 114.30 38.10 50.80 57.15 76.20 95.25 114.30 Weight (lb/ft) (Kg/m) 0.09 0.11 0.14 0.18 0.22 0.25 0.09 0.11 0.14 0.18 0.22 0.25 0.13 0.16 0.21 0.27 0.33 0.37 0.13 0.16 0.21 0.27 0.33 0.37
Product Number Red 00134504400 00134505400v 00134506400 00134508400 00134510500v 00134512500 Blue 00135004400 00135005400v 00135006400 00135008400 00135010500v 00135012500
Nominal I.D. (inches) (mm) 1/4 5/16 3/8 1/2 5/8 3/4 1/4 5/16 3/8 1/2 5/8 3/4 6.35 7.94 9.53 12.70 15.88 19.05 6.35 7.94 9.53 12.70 15.88 19.05
Nominal O.D. (inches) (mm) 0.50 0.56 0.63 0.78 0.91 1.03 0.50 0.56 0.63 0.78 0.91 1.03 12.70 14.29 15.88 19.84 23.02 26.19 12.70 14.29 15.88 19.84 23.02 26.19
Reinforcement Spirals 2 2 2 2 2 2 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 300 300 300 300 250 250 300 300 300 300 250 250 2.07 2.07 2.07 2.07 1.72 1.72 2.07 2.07 2.07 2.07 1.72 1.72
Coupled Lengths
Product Number Red 00134584425v 00134584451v 00134586425v 00134586451v Product Number Blue N N 00135086425v 00135086451v Nominal I.D. (inches) (mm) 1/4 1/4 3/8 3/8 6.35 6.35 9.53 9.53 Lengths (feet) (meters) 25.00 50.00 25.00 50.00 7.62 15.24 7.62 15.24
N = Non-Stock
21
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE Coupled
22
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Red (also available in yellow) Limited EPDM EPDM Spiral polyester yarn -40F to +200F -40C to +93C 50 ft. lengths 5 per carton
Min. Bend Radius (inches) (mm) 4.50 4.50 4.50 114.30 114.30 114.30 Weight (lb/ft) (Kg/m) 0.38 0.38 0.41 0.57 0.57 0.61
Nominal I.D. (inches) (mm) 3/4 3/4 3/4 19.05 19.05 19.05
Nominal O.D. (inches) (mm) 1.15 1.15 1.15 29.21 29.21 29.21
Reinforcement Spirals 4 4 4
Working Pressure (psi) (Mpa) 200 200 300 1.38 1.38 2.07
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Red Limited EPDM EPDM Spiral polyester yarn -40F to +200F -40C to +93C See Chart
(feet) 50 50 25 25 25 50 50 50 50 Lengths (meters) 15.25 15.25 7.62 7.62 7.62 15.25 15.25 15.25 15.25
Product Number 00114586454v 00114587454v 00114586624v 00114587624v 00114587628v 00114586654v 00114586658v 00114587654 00114587658v
Nominal I.D. (inches) (mm) 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 6.35 6.35 9.53 9.53 9.53 9.53 9.53 9.53 9.53
Nominal O.D. (inches) (mm) 0.49 0.62 0.68 0.71 0.71 0.68 0.68 0.71 0.71 12.45 15.75 17.27 18.03 18.03 17.27 17.27 18.03 18.03
Reinforcement Spirals 4 4 4 4 4 4 4 4 4
Working Pressure (psi) (Mpa) 200 300 200 300 300 200 200 300 300 1.38 2.07 1.38 2.07 2.07 1.38 1.38 2.07 2.07
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
FLEX-LOC PUSH-ON
Flex-Loc is the state-of-the-art in push-on hose. It allows push-on fittings to be inserted into place easily and quickly. No special crimping tools are required. Flex-Loc has exceptional coupling retention. The superior holding ability is created by a unique spiral yarn angle design and aramid fiber reinforcement that grips the fitting from the inside. Fittings on the Flex-Loc will not give even under full working pressure. Flex-Loc is available with a 250 psi working pressure. Flex-Loc provides smooth, safe performance in the most demanding, harsh working conditions. Flex-Loc is a high oil resistant, push-on hose. Its tube and cover make this a very effective, working hose for industrial, warehouse and other applications where a convenient push-on hose fitting could be used and value is essential. Note: Not recommended for a variety of unleaded gasoline.
Product Number 700 ft. Reels Black 00338404300 00338406300 00338408300 00338410300 00338412300 Blue 00338504300 00338506300 00338508300 Gray 00338604300 00338606300 00338608300 Red 00338704300 00338706300 00338708300 Green 00338804300v 00338806300 00338808300v Yellow 00338904300v 00338906300v 00338908300v Product Number 250 ft. Reels Black 00338404398 00338406398 00338408398 00338410398 00338412398 Blue 00338504398v 00338506398 00338508398v Gray 00338604398v 00338606398v 00338608398v Red 00338704398v 00338706398v 00338708398v Green 00338804398v 00338806398v 00338808398v Yellow 00338904398v 00338906398v 00338908398v Nominal I.D. (inches) (mm) 1/4 3/8 1/2 5/8 3/4 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2 6.35 9.53 12.70 15.88 19.05 6.35 9.53 12.70 6.35 9.53 12.70 6.35 9.53 12.70 6.35 9.53 12.70 6.35 9.53 12.70
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black, Blue, Gray, Red, Green or Yellow High Non-conductive Nitrile, RMA Class A Nitrile/PVC RMA Class A Spiral aramid yarn -20F to +180F -29C to +82C Reels 700 ft. or 250 ft.
Nominal O.D. (inches) (mm) 0.50 0.63 0.75 0.91 1.03 0.50 0.63 0.75 0.50 0.63 0.75 0.50 0.63 0.75 0.50 0.63 0.75 0.50 0.63 0.75 12.70 15.88 19.05 23.02 26.19 12.70 15.88 19.05 12.70 15.88 19.05 12.70 15.88 19.05 12.70 15.88 19.05 12.70 15.88 19.05
Reinforcement Spirals 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Working Pressure Min.Bend Radius (psi) (Mpa) (inches) (mm) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.50 38.10 2.25 57.15 3.00 76.20 3.75 95.25 4.50 114.30 1.50 2.25 3.00 1.50 2.25 3.00 1.50 2.25 3.00 1.50 2.25 3.00 1.50 2.25 3.00 38.10 57.15 76.20 38.10 57.15 76.20 38.10 57.15 76.20 38.10 57.15 76.20 38.10 57.15 76.20
Weight (lb/ft) (Kg/m) 0.09 0.12 0.16 0.22 0.25 0.13 0.18 0.24 0.33 0.37
0.09 0.13 0.12 0.18 0.16 0.24 0.09 0.13 0.12 0.18 0.16 0.24 0.09 0.13 0.12 0.18 0.16 0.24 0.09 0.13 0.12 0.18 0.16 0.24 0.09 0.13 0.12 0.18 0.16 0.24
23
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
24
Resistance:
Branding: Thermoid Flex-Loc 300 Non-conductive Size 300 PSI WP Made In USA MSHA 1C Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Reinforcement Spirals 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Black, Blue, Gray, Red, Green or Yellow High Non-conductive Nitrile, RMA Class A Nitrile/PVC RMA Class A Spiral aramid yarn -30F to +180F -34C to +82C Reels 700 ft.
Min. Bend Radius (inches) (mm) 1.50 2.25 3.00 3.75 4.50 1.50 2.25 3.00 1.50 2.25 3.00 1.50 2.25 3.00 1.50 2.25 3.00 1.50 2.25 3.00 38.10 57.15 76.20 95.25 114.30 38.10 57.15 76.20 38.10 57.15 76.20 38.10 57.15 76.20 38.10 57.15 76.20 38.10 57.15 76.20 Weight (lb/ft) (Kg/m) 0.10 0.13 0.16 0.23 0.26 0.10 0.13 0.16 0.10 0.13 0.16 0.10 0.13 0.16 0.10 0.13 0.16 0.10 0.13 0.16 0.15 0.19 0.24 0.34 0.39 0.15 0.19 0.24 0.15 0.19 0.24 0.15 0.19 0.24 0.15 0.19 0.24 0.15 0.19 0.24
Working Pressure (psi) (Mpa) 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
EXCALIBUR MULTIPURPOSE
Excalibur is a highly versatile multipurpose hose designed for high pressure, extreme temperatures and working environments. Excalibur is ideal for use in air, water or petroleum applications in heavy construction, mining or quarry operations. It also provides superior service for washer operations in meat and poultry plants or agricultural sprays. Excalibur is non-conductive, flame resistant and is MSHA approved with a Class A RMA rating. Excalibur has a spiral polyester yarn construction that maximizes flexibility and strength while providing a constant 500 psi working pressure. A highly visible yellow, NBR/PVC blend cover provides excellent resistance to fats, oils, kerosene and gasoline. Excalibur provides smooth, constant performance in temperatures ranging from -40F to +212F. The cover is not as abrasion resistant as our Hercules hose, but provides economical value in high pressure applications.
Resistance:
K G
Branding: Thermoid Excalibur Multipurpose Hose Size I.D. 500 PSI WP MSHA 1C-114/1 Made In USA Electrically Non-conductive Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Yellow High NBR/PVC, RMA Class A NBR/PVC, RMA Class A, MSHA Approved Spiral polyester yarn -40F to +212F -40C to +100C Reels
Nominal I.D. (inches) (mm) 1/4 3/8 1/2 3/4 1 6.35 9.53 12.70 19.05 25.40
Nominal O.D. (inches) (mm) 0.63 0.75 0.91 1.19 1.50 15.88 19.05 23.02 30.16 38.10
Reinforcement Spirals 4 4 4 4 4
Working Pressure (psi) (Mpa) 500 500 500 500 500 3.45 3.45 3.45 3.45 3.45
Min. Bend Radius (inches) (mm) 1.50 2.25 3.00 4.50 7.00 38.10 57.15 76.20 114.30 177.80
Weight (lb/ft) (Kg/m) 0.16 0.22 0.24 0.37 0.51 0.24 0.33 0.36 0.55 0.76
Resistance:
K G
Branding: Thermoid Hercules Multipurpose Hose Size I.D. 500 PSI WP MSHA 1C-114/1 Made In USA Non-conductive Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Yellow High NBR/PVC, RMA Class A NBR/PVC, carboxylated nitrile blend RMA Class A 4-spiral polyester yarn - 1/4", 3/8", 1/2" sizes -40F to +212F -40C to +100C Reels
Reinforcement Spirals 4 4 4 4 4 4 4
Working Pressure (psi) (Mpa) 500 500 500 500 500 500 500 3.45 3.45 3.45 3.45 3.45 3.45 3.45
Min. Bend Radius (inches) (mm) 1.50 2.25 3.00 4.50 7.00 8.75 10.50 38.10 57.15 76.20 114.30 177.80 222.25 266.70
Weight (lb/ft) (Kg/m) 0.14 0.21 0.24 0.36 0.51 0.66 0.70 0.21 0.31 0.36 0.54 0.76 0.98 1.04
25
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
26
Resistance:
K G
Branding: Thermoid Hercules 1000 Multipurpose Hose Size I.D. 1000 PSI WP MSHA 1C-114/1 Made In USA Non-conductive Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Yellow High NBR/PVC, RMA Class A NBR/PVC, carboxylated nitrile blend RMA Class A (Pin Pricked) 4-spiral polyester yarn - 1/4", 3/8", 1/2" sizes 4-spiral aramid fiber - 3/4" and 1" sizes -40F to +212F -40C to +100C Reels
Reinforcement Spirals 4 4 4 4 4
Working Pressure (psi) (Mpa) 1000 1000 1000 1000 1000 6.89 6.89 6.89 6.89 6.89
Min. Bend Radius (inches) (mm) 1.50 2.25 3.00 4.50 7.00 38.10 57.15 76.20 114.30 177.80
Weight (lb/ft) (Kg/m) 0.16 0.22 0.24 0.35 0.47 0.24 0.33 0.36 0.52 0.70
GLACIER MULTIPURPOSE
Glacier is a cold weather hose specifically engineered for use in sub-zero applications.This involves air, oil, gasoline, diesel, kerosene, fuel oil and some chemicals. Even at temperatures as low as -65F, Glacier keeps its flexibility, resists kinks and maintains its easy-reeling characteristics. Glacier has oil resistant, synthetic rubber tube that is reinforced with a spiraled high tensile polyester cord. These features combine to provide a constant working pressure of 300 psi and a 4:1 burst safety factor. Glaciers blue synthetic rubber cover is designed for maximum abrasion resistance. Glacier comes in a variety of sizes. The Glacier hose is designed to operate effectively and remain easy to handle and reel in temperatures ranging from -65F to +180F.
Resistance:
Blue High
ECO low temperature oil resistant synthetic rubber RMA Class A Cover: ECO low temperature oil resistant synthetic rubber RMA Class A Reinforcement: Spiral polyester yarn Temperature Range: -65F to +180F -54C to +82C Packaging: Reels
Reinforcement Spirals 4 4 4 4 4 4 4 4 Working Pressure (psi) (Mpa) 300 300 300 300 300 300 300 300 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 Min. Bend Radius (inches) (mm) 1.50 2.25 3.00 4.50 7.00 8.75 9.25 10.50 38.10 57.15 76.20 114.30 177.80 222.25 234.95 266.70 Weight (lb/ft) (Kg/m) 0.15 0.21 0.30 0.39 0.49 0.61 0.68 0.83 0.22 0.31 0.45 0.58 0.73 0.91 1.01 1.23
Product Number 22554166662v 22554246662 22554326662 22554486662 22554646662 22554806662 22554886662v 22554966662
Nominal I.D. (inches) (mm) 1/4 3/8 1/2 3/4 1 1-1/4 1-3/8 1-1/2 6.35 9.53 12.70 19.05 25.40 31.75 34.93 38.10
Nominal O.D. (inches) (mm) 0.63 0.75 0.94 1.25 1.50 1.78 1.88 2.09 15.88 19.05 23.81 31.75 38.10 45.24 47.63 53.18
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
ZEPHYR AIR
Zephyr is an industrial strength high-pressure, wire-braid air hose. It is well suited for multiple uses in air tool and air activated equipment. It has applications for use in either construction or industrial environments. Zephyr Air hose features a variety of hose construction designs, sizes and working pressures to fit your application. In the 1/2" I.D. to 1" I.D. sizes, Zephyr features a SBR/NBR tube. In 1-1/4" I.D. or larger sizes, Zephyr has an EPDM tube. All hose sizes are reinforced with heavy-duty, spiral wire braids to provide excellent strength and durability. Zephyrs cover consists of a NBR/PVC compound in the 1/2" I.D. to 1" I.D. sizes. EPDM is the cover compound for sizes 1-1/4" I.D. and larger. All hose sizes have a distinct yellow cover that is abrasion, kink and ozone resistant. Zephyr Air hose provides a dependable and constant working pressure. Zephyr has 3 different working pressure ranges to select from, including 500, 650 or 1000 psi. This durable, high-pressure air hose delivers smooth, trouble-free performance. It is available in sizes and lengths to fit your requirements.
Product Number 22441328662 22441488662 22441648662 01014444502v 01014445502 01014446502 Nominal I.D. (inches) (mm) 1/2 3/4 1 1-1/4 1-1/2 2 12.70 19.05 25.40 31.75 38.10 50.80 Nominal O.D. (inches) (mm) 0.81 1.13 1.38 1.81 2.00 2.50 20.64 28.58 34.93 46.04 50.80 63.50
Resistance:
SBR/NBR, RMA Class C: 1/2" to 1" EPDM, RMA Class C: 1-1/4" and over Cover: NBR/PVC, RMA Class A: 1/2" to 1" EPDM, RMA Class C: 1-1/4" and over Reinforcement: One or multiple wire braids Temperature Range: -40F to +180F -40C to +82C Packaging: 50 ft. lengths all sizes; Reels 1/2" to 1"
Braids 1 1 1 1 1 2
Working Pressure (psi) (Mpa) 1000 1000 1000 650 500 500 6.89 6.89 6.89 4.48 3.45 3.45
Min. Bend Radius (inches) (mm) 3.00 4.50 7.00 8.75 10.50 14.00 76.20 114.30 177.80 222.25 266.70 355.60
Weight (lb/ft) (Kg/m) 0.32 0.44 0.77 0.90 1.00 1.40 0.48 0.65 1.15 1.34 1.49 2.08
27
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
BLACK STANDARD HEATER & BLACK OEM HEATER SAE 20R3, CLASS D2 TYPE
Kink-resistant EPDM tube and cover resist cracking and weather checking. Multi-spiral polyester reinforced to stay flexible even in extreme temperatures. Long service life since hoses can withstand the abuse of corrosive additives, ozone and abrasion. Series 4703 is SAE 20R3, Class D2 -Type. Series 4709 is standard duty heater hose.
Resistance:
Branding: 4703 Thermoid (Size) OEM Heater Hose Made In USA 4709 Thermoid (Size) Heater Hose Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black Limited EPDM EPDM Spiral polyester yarn -40F to +200F -40C to +93C Reels, 50 ft. length 1 per carton
Min. Bend Radius (inches) (mm) 3.00 3.75 3.75 4.50 4.50 7.00 7.00 3.00 3.00 3.75 3.75 4.50 4.50 7.00 7.00 76.20 95.25 95.25 114.30 114.30 177.80 177.80 76.20 76.20 95.25 95.25 114.30 114.30 177.80 177.80 Weight (lb/ft) (Kg/m) 0.18 0.22 0.22 0.25 0.25 0.38 0.38 0.16 0.16 0.20 0.20 0.23 0.23 0.39 0.39 0.27 0.33 0.33 0.37 0.37 0.57 0.57 0.24 0.24 0.30 0.30 0.34 0.34 0.58 0.58
Product Number 00470308151v 00470310199 00470310151v 00470312199 00470312151v 00470316199v 00470316151v 00470908199 00470908151v 00470910199 00470910151v 00470912199 00470912151 00470916199 00470916151
Nominal I.D. (inches) (mm) 1/2 5/8 5/8 3/4 3/4 1 1 1/2 1/2 5/8 5/8 3/4 3/4 1 1 12.70 15.88 15.88 19.05 19.05 25.40 25.40 12.70 12.70 15.88 15.88 19.05 19.05 25.40 25.40
Nominal O.D. (inches) (mm) 0.80 0.94 0.94 1.06 1.06 1.34 1.34 0.81 0.81 0.88 0.88 1.03 1.03 1.34 1.34 20.24 23.81 23.81 26.99 26.99 34.13 34.13 20.64 20.64 22.23 22.23 26.19 26.19 34.13 34.13
Reinforcement Spirals 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 62 62 62 50 50 44 44 35 35 35 35 35 35 25 25 0.43 0.43 0.43 0.34 0.34 0.30 0.30 0.24 0.24 0.24 0.24 0.24 0.24 0.17 0.17
Resistance:
Branding: Air Brake 3/8" A SAE J1402 Made In USA D.O.T. KX 3/8 (9.5mm) A Air Brake 1/2" SP A SAE J1402 Made In USA D.O.T. KX 1/2" SP (12.7mm) A Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black Medium EPDM, RMA Class C EPDM, RMA Class C Spiral polyester yarn -40F to +200F -40C to +93C Maximum 2 pc. 250 ft. reel,**50 ft. length 1 per carton
Min. Bend Radius (inches) (mm) 2.25 2.25 2.25 3.00 3.00 3.00 57.15 57.15 57.15 76.20 76.20 76.20 Weight (lb/ft) (Kg/m) 0.17 0.17 0.17 0.20 0.20 0.20 0.25 0.25 0.25 0.30 0.30 0.30
Nominal I.D. (inches) (mm) 3/8 3/8 3/8 1/2 1/2 1/2 9.53 9.53 9.53 12.70 12.70 12.70
Nominal O.D. (inches) (mm) 0.75 0.75 0.75 0.88 0.88 0.88 19.05 19.05 19.05 22.23 22.23 22.23
Reinforcement Spirals 4 4 4 4 4 4
Working Pressure (psi) (Mpa) Min. Burst 900 Min. Burst 900 Min. Burst 900 Min. Burst 900 Min. Burst 900 Min. Burst 900 6.20 6.20 6.20 6.20 6.20 6.20
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
FUEL LINE, VAPOR EMISSION & CRANKCASE VENTILATION SIMILAR TO SAE 30R7
This durable, quality-made hose is similar to the SAE J30R7 specifications. It is used for conveying most current types of fuels in automobiles, trucks and buses. This hose is also an aftermarket standard. It provides excellent service for original equipment, wholesalers, aftermarket packagers and auxiliary tank manufacturers. This hose provides superior temperature service and operates in a wide range from -29F to +257F. It features an NBR tube and an NBR/PVC cover reinforced with multiple spiral polyester. This combination helps keep the hose flexible while standing up to oil, grease, ozone and under-hood temperatures generated by todays automotive engines. It is available in a variety of sizes and packaging options to suit your application.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Medium-High NBR, RMA Class A NBR/PVC, RMA Class B Spiral polyester yarn -29F to +257F -34C to +125C 25 ft. lengths 10 lengths per master carton 50 ft. lengths 5 lengths per master carton 250 ft. reel maximum 2 lengths per reel 700 ft. reel maximum 2 lengths per reel
Min. Bend Radius (inches) (mm) 1.25 1.50 2.00 2.25 1.25 1.50 2.00 2.25 1.25 1.50 2.00 2.25 1.25 1.50 2.00 2.25 31.75 38.10 50.80 57.15 31.75 38.10 50.80 57.15 31.75 38.10 50.80 57.15 31.75 38.10 50.80 57.15 Weight (lb/ft) (Kg/m) 0.07 0.09 0.11 0.12 0.07 0.09 0.11 0.12 0.07 0.09 0.11 0.12 0.07 0.09 0.11 0.12 0.10 0.13 0.16 0.18 0.10 0.13 0.16 0.18 0.10 0.13 0.16 0.18 0.10 0.13 0.16 0.18
Product Number 25 ft. Coil 00667503225v 00667504225v 00667505225v 00667506225v 50 ft. Coil 00667503252v 00667504252v 00667505252v 00667506252v 250 ft. Reel 00667503298v 00667504298 00667505298 00667506298 700 ft. Reel 00667503299 00667504299 00667505299 00667506299
Nominal I.D. (inches) (mm) 3/16 1/4 5/16 3/8 3/16 1/4 5/16 3/8 3/16 1/4 5/16 3/8 3/16 1/4 5/16 3/8 4.76 6.35 7.94 9.53 4.76 6.35 7.94 9.53 4.76 6.35 7.94 9.53 4.76 6.35 7.94 9.53
Nominal O.D. (inches) (mm) 0.41 0.50 0.56 0.63 0.41 0.50 0.56 0.63 0.41 0.50 0.56 0.63 0.41 0.50 0.56 0.63 10.32 12.70 14.29 15.88 10.32 12.70 14.29 15.88 10.32 12.70 14.29 15.88 10.32 12.70 14.29 15.88
Reinforcement Spirals 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34
29
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
D
NBR CR Tire cord -40F to +212F -40C to +100C Make to Order (MTO) Contact Salisbury for details 6 ft., 12 ft and 60 ft. lengths available 1/2" and 5/8" I.D. 25 ft. maximum Other lengths 5% cutting charge
Working Pressure Min.Bend Radius (psi) (Mpa) (inches) (mm) 175 125 125 125 125 100 100 100 100 62 62 62 62 62 50 50 50 50 50 50 50 37 37 37 37 37 25 25 12 12 10 1.21 0.86 0.86 0.86 0.86 0.69 0.69 0.69 0.69 0.43 0.43 0.43 0.43 0.43 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.25 0.25 0.25 0.25 0.25 0.17 0.17 0.08 0.08 0.07 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.36 0.41 0.46 0.52 0.59 0.62 0.68 0.73 0.79 0.84 0.90 0.95 1.00 1.06 1.11 1.17 1.22 1.27 1.33 1.39 1.44 1.49 1.55 1.66 1.76 1.87 1.98 2.09 2.31 2.52 2.74 0.54 0.61 0.68 0.77 0.88 0.92 1.01 1.09 1.18 1.25 1.34 1.41 1.49 1.58 1.65 1.74 1.82 1.89 1.98 2.07 2.14 2.22 2.31 2.47 2.62 2.78 2.95 3.11 3.44 3.75 4.08
Product Number 6 Feet 16115805006v 16115806206v 16115807506v 16115808706 16115810006 16115811206v 16115812506 16115813706v 16115815006 16115816206v 16115817506 16115818706 16115820006 16115821206v 16115822506 16115823706 16115825006 16115826206v 16115827506v 16115828706 16115830006 16115831206v 16115832506v 16115835006 16115837506v 16115840006v 16115842506v 16115845006v 16115850006v 16115855006v 16115860006v
Product Number 12 Feet 16115805012v 16115806212v 16115807512v 16115808712 16115810012 16115811212v 16115812512 16115813712v 16115815012 16115816212 16115817512 16115818712 16115820012 16115821212v 16115822512 16115823712 16115825012 16115826212v 16115827512v 16115828712 16115830012 16115831212v 16115832512v 16115835012 16115837512v 16115840012v 16115842512v 16115845012v 16115850012v 16115855012v 16115860012v
Product Number 60 Feet 16115805025v 16115806225v 16115807560v 16115808760 16115810060 16115811260v 16115812560 16115813760v 16115815060 16115816260 16115817560 16115818760 16115820060 16115821260v 16115822560 16115823760 16115825060 16115826260v 16115827560v 16115828760 16115830060 16115831260v 16115832560v 16115835060 16115837560v 16115840060v 16115842560v 16115845060v 16115850060v 16115855060v 16115860060v
Nominal I.D. Nominal O.D. Plies (inches) (mm) (inches) (mm) 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-1/2 3-3/4 4 4-1/4 4-1/2 5 5-1/2 6 12.70 15.88 19.05 22.23 25.40 28.58 31.75 34.93 38.10 41.28 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 79.38 82.55 88.90 95.25 101.60 107.95 114.30 127.00 139.70 152.40 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 2.75 2.88 3.00 3.13 3.25 3.38 3.50 3.63 3.75 4.00 4.25 4.50 4.75 5.00 5.50 6.00 6.50 25.40 28.58 31.75 34.93 38.10 41.28 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 79.38 82.55 85.73 88.90 92.08 95.25 101.60 107.95 114.30 120.65 127.00 139.70 152.40 165.10 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
G D
Branding: SAE 30R7 TYPE 7318 Size Made In USA Caution Statement
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black High NBR CR Nylon screen -34F to +257F -37C to +125C 60 ft. Other lengths available 5% cutting charge Contact customer service for minimum run requirements
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.62 0.71 0.76 0.80 0.93 0.98 0.92 1.06 1.13 1.19 1.38 1.46
Nominal I.D. (inches) (mm) 1-1/2 1-3/4 1-7/8 2 2-1/4 2-3/8 38.10 44.45 47.63 50.80 57.15 60.33
Nominal O.D. (inches) (mm) 1.87 2.15 2.25 2.39 2.67 2.79 47.50 54.61 57.15 60.71 67.82 70.87
Plies 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 35 35 35 35 35 35 0.24 0.24 0.24 0.24 0.24 0.24
31
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Branding: Thermoid Coolant I.D. Made In USA foot and inch marks
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Medium to Medium-High NBR/SBR CR/NBR blend 2-ply polyester cord 0F to +212F -18C to +100C Make to Order (MTO) Contact Salisbury for details 3 ft. and 10 ft. lengths available Other lengths 5% cutting charge
Product Number 3 Feet 16010006203 16010007503 16010008703 16010010003 16010011203 16010012503 16010013103v 16010013703 16010015003 16010016203 16010017503 16010018703 16010020003 16010021203v 16010022503 16010023703 16010025003 16010026203v 16010027503 16010028703 16010030003 16010031203 16010032503v 16010035003 16010037503v 16010040003 16010042503v 16010045003 16010047503v 16010050003v 16010055003v 16010060003v
Product Number 10 Feet 16010006210 16010007510 16010008710 16010010010 16010011210 16010012510 16010013110v 16010013710 16010015010 16010016210 16010017510 16010018710 16010020010 16010021210v 16010022510 16010023710 16010025010 16010026210v 16010027510 16010028710 16010030010 16010031210 16010032510v 16010035010 16010037510v 16010040010 16010042510v 16010045010 16010047510v 16010050010v 16010055010v 16010060010v
Std. Std. Nominal I.D. Nominal O.D. Plies Working Pressure Min.Bend Radius Weight Case Ea. Case Ea. (inches) (mm) (inches) (mm) (psi) (Mpa) (inches) (mm) (lb/ft) (Kg/m) (3 ft) (10 ft) 5/8 15.88 3/4 19.05 7/8 22.23 1 25.40 1-1/8 28.58 1-1/4 31.75 1-5/16 33.34 1-3/8 34.93 1-1/2 38.10 1-5/8 41.28 1-3/4 44.45 1-7/8 47.63 2 50.80 2-1/8 53.98 2-1/4 57.15 2-3/8 60.33 2-1/2 63.50 2-5/8 66.68 2-3/4 69.85 2-7/8 73.03 3 76.20 3-1/8 79.38 3-1/4 82.55 3-1/2 88.90 3-3/4 95.25 4 101.60 4-1/4 107.95 4-1/2 114.30 4-3/4 120.65 5 127.00 5-1/2 139.70 6 152.40 1.00 1.13 1.25 1.38 1.50 1.63 1.69 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 2.75 2.88 3.00 3.13 3.25 3.38 3.50 3.63 3.88 4.13 4.38 4.63 4.88 5.13 5.38 5.88 6.38 25.40 28.58 31.75 34.93 38.10 41.28 42.86 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 79.38 82.55 85.73 88.90 92.08 98.43 104.78 111.13 117.48 123.83 130.18 136.53 149.23 161.93 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 56 56 56 53 53 51 51 51 49 49 48 45 45 44 43 39 39 38 38 35 33 33 33 28 25 19 18 16 16 15 14 12 0.39 0.39 0.39 0.37 0.37 0.35 0.35 0.35 0.34 0.34 0.33 0.31 0.31 0.30 0.30 0.27 0.27 0.26 0.26 0.24 0.23 0.23 0.23 0.19 0.17 0.13 0.12 0.11 0.11 0.10 0.10 0.08 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a 0.34 0.37 0.41 0.45 0.50 0.54 0.56 0.58 0.63 0.67 0.71 0.76 0.80 0.84 0.89 0.93 0.99 1.02 1.05 1.11 1.15 1.20 1.24 1.33 1.43 1.51 1.60 1.69 1.78 1.87 2.04 2.22 0.51 0.55 0.61 0.67 0.74 0.80 0.83 0.86 0.94 1.00 1.06 1.13 1.19 1.25 1.32 1.38 1.47 1.52 1.56 1.65 1.71 1.79 1.85 1.98 2.13 2.25 2.38 2.52 2.65 2.78 3.04 3.30 10 10 10 10 10 10 10 10 10 10 10 10 10 6 6 6 6 6 6 6 4 4 4 4 4 4 4 4 4 2 2 2 6 6 6 5 5 5 5 5 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Branding: Thermoid Coolant I.D. Made In USA foot and inch marks
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Medium to Medium-High NBR/SBR blend CR/NBR blend 3-ply polyester cord 0F to +212F -18C to +100C Make to Order (MTO) Contact Salisbury for details 3 ft. and 12 ft. lengths available Other lengths 5% cutting charge
Product Number 3 Feet 16010106203v 16010107503v 16010108703v 16010110003v 16010111203v 16010112503 16010113103v 16010113703v 16010115003 16010116203 16010117503 16010118703v 16010120003 16010121203v 16010122503v 16010123703 16010125003 16010126203v 16010127503v 16010128703v 16010130003 16010131203v 16010132503v 16010135003 16010137503v 16010140003v 16010142503v 16010145003v 16010147503v 16010150003v 16010155003v 16010160003v
Product Number 12 Feet 16010106212v 16010107512v 16010108712v 16010110012v 16010111212v 16010112512 16010113112v 16010113712v 16010115012 16010116212 16010117512 16010118712v 16010120012 16010121212v 16010122512v 16010123712 16010125012 16010126212v 16010127512v 16010128712v 16010130012 16010131212v 16010132512v 16010135012 16010137512v 16010140012v 16010142512v 16010145012v 16010147512v 16010150012v 16010155012v 16010160012v
Std. Std. Nominal I.D. Nominal O.D. Plies Working Pressure Min.Bend Radius Weight Case Ea. Case Ea. (inches) (mm) (inches) (mm) (psi) (Mpa) (inches) (mm) (lb/ft) (Kg/m) (3 ft) (12 ft) 5/8 3/4 7/8 1 1-1/8 1-1/4 1-5/16 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-1/2 3-3/4 4 4-1/4 4-1/2 4-3/4 5 5-1/2 6 15.88 19.05 22.23 25.40 28.58 31.75 33.34 34.93 38.10 41.28 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 79.38 82.55 88.90 95.25 101.60 107.95 114.30 120.65 127.00 139.70 152.40 1.13 1.25 1.38 1.50 1.63 1.75 1.81 1.88 2.00 2.13 2.25 2.38 2.50 2.63 2.75 2.88 3.00 3.13 3.25 3.38 3.50 3.63 3.75 4.00 4.13 4.50 4.75 5.00 5.25 5.50 6.00 6.50 28.58 31.75 34.93 38.10 41.28 44.45 46.04 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 79.38 82.55 85.73 88.90 92.08 95.25 101.60 104.78 114.30 120.65 127.00 133.35 139.70 152.40 165.10 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 56 56 56 88 88 88 88 88 81 81 81 75 75 75 70 70 68 62 62 62 58 55 53 50 50 45 43 41 41 36 34 30 0.39 0.39 0.39 0.61 0.61 0.61 0.61 0.61 0.56 0.56 0.56 0.52 0.52 0.52 0.48 0.48 0.47 0.43 0.43 0.43 0.40 0.38 0.37 0.34 0.34 0.31 0.30 0.28 0.28 0.25 0.23 0.21 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a 0.46 0.50 0.54 0.59 0.65 0.70 0.73 0.75 0.81 0.86 0.91 0.97 1.02 1.08 1.13 1.19 1.24 1.30 1.35 1.41 1.46 1.51 1.57 1.68 1.80 1.90 2.01 2.12 2.22 2.31 2.55 2.77 0.68 0.74 0.80 0.88 0.97 1.04 1.09 1.12 1.21 1.28 1.35 1.44 1.52 1.61 1.68 1.77 1.85 1.93 2.01 2.10 2.17 2.25 2.34 2.50 2.68 2.83 2.99 3.16 3.30 3.44 3.80 4.12 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 6 6 6 6 6 4 4 4 4 4 4 4 4 4 1 1 1 6 6 6 6 6 6 6 5 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
33
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Medium to Medium-High Class B Class C Tire cord -65F to +212F -54C to +100C Make to Order (MTO) Contact Salisbury for details 12 ft. and 60 ft. lengths available 1/2" and 5/8" I.D.s are 25 ft. maximum Other lengths 5% cutting charge
Plies 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Working Pressure Min.Bend Radius (psi) (Mpa) (inches) (mm) 106 94 81 81 75 75 69 69 69 69 69 50 50 47 44 44 38 31 25 18 18 19 13 13 13 13 13 13 13 0.73 0.65 0.56 0.56 0.52 0.52 0.48 0.48 0.48 0.48 0.48 0.34 0.34 0.32 0.30 0.30 0.26 0.21 0.17 0.12 0.12 0.13 0.09 0.09 0.09 0.09 0.09 0.09 0.09 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.29 0.31 0.36 0.39 0.43 0.48 0.52 0.55 0.58 0.63 0.71 0.72 0.77 0.82 0.86 0.91 0.95 1.04 1.12 1.17 1.21 1.29 1.38 1.47 1.55 1.64 1.82 1.99 2.16 0.43 0.46 0.54 0.58 0.64 0.71 0.77 0.82 0.86 0.94 1.06 1.07 1.15 1.22 1.28 1.35 1.41 1.55 1.67 1.74 1.80 1.92 2.05 2.19 2.31 2.44 2.71 2.96 3.21
Product Number 12 Feet 16201205012v 16201206212 16201207512v 16201208712 16201210012v 16201211212 16201212512 16201213712v 16201215012 16201216212v 16201217512 16201218712v 16201220012 16201221212v 16201222512 16201223712v 16201225012 16201227512 16201230012v 16201231212v 16201232512v 16201235012v 16201237512v 16201240012v 16201242512v 16201245012v 16201250012v 16201255012v 16201260012v
Product Number 60 Feet 16201205025v 16201206225 16201207560v 16201208760 16201210060v 16201211260 16201212560 16201213760v 16201215060 16201216260v 16201217560 16201218760v 16201220060 16201221260v 16201222560 16201223760v 16201225060 16201227560 16201230060v 16201231260v 16201232560v 16201235060v 16201237560v 16201240060v 16201242560v 16201245060v 16201250060v 16201255060v 16201260060v
Nominal I.D. (inches) (mm) 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/8 3-1/4 3-1/2 3-3/4 4 4-1/4 4-1/2 5 5-1/2 6 12.70 15.88 19.05 22.23 25.40 28.58 31.75 34.93 38.10 41.28 44.45 47.63 50.80 53.98 57.15 60.33 63.50 69.85 76.20 79.38 82.55 88.90 95.25 101.60 107.95 114.30 127.00 139.70 152.40
Nominal O.D. (inches) (mm) 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.06 2.25 2.25 2.38 2.50 2.63 2.75 2.88 3.13 3.38 3.50 3.63 3.88 4.13 4.38 4.63 4.88 5.38 5.88 6.38 22.23 25.40 28.58 31.75 34.93 38.10 41.28 44.45 47.63 52.39 57.15 57.15 60.33 63.50 66.68 69.85 73.03 79.38 85.73 88.90 92.08 98.43 104.78 111.13 117.48 123.83 136.53 149.23 161.93
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Medium-High Class B Class C Tire cord -65F to +212F -54C to +100C Make to Order (MTO) Contact Salisbury for details 12 ft. and 60 ft. lengths available 1/2" and 5/8" I.D.s are 25 ft. maximum Other lengths 5% cutting charge
Plies 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Working Pressure Min.Bend Radius (psi) (Mpa) (inches) (mm) 125 125 125 125 125 125 125 112 113 106 100 94 88 87 88 75 75 62 63 62 63 50 50 50 38 38 37 37 25 25 25 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.77 0.78 0.73 0.69 0.65 0.61 0.60 0.61 0.52 0.52 0.43 0.43 0.43 0.43 0.34 0.34 0.34 0.26 0.26 0.25 0.25 0.17 0.17 0.17 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.38 0.44 0.49 0.56 0.61 0.67 0.72 0.77 0.85 0.91 0.97 1.03 1.09 1.14 1.20 1.26 1.32 1.38 1.44 1.50 1.56 1.61 1.67 1.79 1.90 2.02 2.13 2.25 2.48 2.71 2.95 0.57 0.65 0.73 0.83 0.91 1.00 1.07 1.15 1.27 1.35 1.44 1.53 1.62 1.70 1.79 1.88 1.96 2.05 2.14 2.23 2.32 2.40 2.49 2.66 2.83 3.01 3.17 3.35 3.69 4.03 4.39
Product Number 12 Feet 16201505012v 16201506212v 16201507512v 16201508712v 16201510012v 16201511212v 16201512512v 16201513712v 16201515012v 16201516212v 16201517512v 16201518712v 16201520012v 16201521212v 16201522512v 16201523712v 16201525012v 16201526212v 16201527512v 16201528712v 16201530012v 16201531212v 16201532512v 16201535012v 16201537512v 16201540012v 16201542512v 16201545012v 16201550012v 16201555012v 16201560012v
Product Number 60 Feet 16201505025v 16201506225v 16201507560v 16201508760v 16201510060v 16201511260v 16201512560v 16201513760v 16201515060v 16201516260v 16201517560v 16201518760v 16201520060v 16201521260v 16201522560v 16201523760v 16201525060v 16201526260v 16201527560v 16201528760v 16201530060v 16201531260v 16201532560v 16201535060v 16201537560v 16201540060v 16201542560v 16201545060v 16201550060v 16201555060v 16201560060v
Nominal I.D. (inches) (mm) 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-1/2 3-3/4 4 4-1/4 4-1/2 5 5-1/2 6 12.70 15.88 19.05 22.23 25.40 28.58 31.75 34.93 38.10 41.28 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 70.61 76.20 79.38 82.55 88.90 95.25 101.60 107.95 114.30 127.00 139.70 152.40
Nominal O.D. (inches) (mm) 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 2.75 2.88 3.00 3.13 3.25 3.38 3.50 3.63 3.75 4.00 4.25 4.51 4.76 5.01 5.51 6.01 6.51 25.40 28.58 31.75 34.93 38.10 41.28 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 79.38 82.55 85.73 88.90 92.08 95.25 101.60 107.95 114.55 120.90 127.25 139.95 152.65 165.35
35
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Blue High Silicone Silicone 2-ply polyester fabric, silicone coated -67F to +347F -55C to +175C 5/8" I.D. 25 ft. 3/4" to 3" I.D. 60 ft. 3-1/8" to 6" I.D. 12 ft. Other lengths available 5% cutting charge
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.30 0.35 0.40 0.44 0.48 0.52 0.56 0.60 0.64 0.69 0.74 0.77 0.81 0.86 0.90 0.94 0.98 1.02 1.07 1.11 1.22 1.27 1.33 1.42 1.50 1.60 1.67 1.85 2.04 2.20 0.45 0.52 0.60 0.65 0.71 0.77 0.83 0.89 0.95 1.03 1.10 1.15 1.21 1.28 1.34 1.40 1.46 1.52 1.59 1.65 1.82 1.89 1.98 2.11 2.23 2.38 2.49 2.75 3.04 3.27
Product Number 16300306212v 16300307512v 16300308712v 16300310012 16300311212v 16300312512v 16300313712v 16300315012 16300316212v 16300317512v 16300318712v 16300320012 16300321212v 16300322512v 16300323712v 16300325012 16300326212v 16300327512v 16300328712v 16300330012 16300331212v 16300332512v 16300335012v 16300337512v 16300340012v 16300342512v 16300345012v 16300350012v 16300355012v 16300360012v
Nominal I.D. (inches) (mm) 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-1/2 3-3/4 4 4-1/4 4-1/2 5 5-1/2 6 15.88 19.05 22.23 25.40 28.58 31.75 34.93 38.10 41.28 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 79.38 82.55 88.90 95.25 101.60 107.95 114.30 127.00 139.70 152.40
Nominal O.D. (inches) (mm) 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 2.75 2.88 3.00 3.13 3.25 3.38 3.50 3.63 3.88 4.13 4.38 4.63 4.88 5.38 5.88 6.38 25.40 28.58 31.75 34.93 38.10 41.28 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 79.38 82.55 85.73 88.90 92.08 98.43 104.78 111.13 117.48 123.83 136.53 149.23 161.93
Plies 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 94 81 81 75 71 69 66 63 59 56 54 50 46 44 41 38 31 31 22 22 19 18 18 13 12 12 12 12 11 10 0.65 0.56 0.56 0.52 0.49 0.48 0.45 0.43 0.41 0.39 0.37 0.34 0.32 0.30 0.28 0.26 0.21 0.21 0.15 0.15 0.13 0.12 0.12 0.09 0.08 0.08 0.08 0.08 0.08 0.07
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Blue High Silicone Silicone 3-ply polyester fabric, silicone coated -67F to +347F -55C to +175C 5/8" I.D. 25 ft. 3/4" to 3" I.D. 60 ft. 3-1/8" to 6" I.D. 12 ft. Other lengths available 5% cutting charge
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.40 0.44 0.50 0.55 0.60 0.65 0.70 0.74 0.90 0.85 0.91 0.95 1.00 1.05 1.10 1.15 1.20 1.25 1.31 1.36 1.46 1.52 1.60 1.70 1.81 1.92 2.09 2.22 2.45 2.65 0.60 0.65 0.74 0.82 0.89 0.97 1.04 1.10 1.34 1.27 1.35 1.41 1.49 1.56 1.64 1.71 1.79 1.86 1.95 2.02 2.17 2.26 2.38 2.53 2.69 2.86 3.11 3.30 3.65 3.94
Product Number 16300406212v 16300407512v 16300408712v 16300410012v 16300411212v 16300412512v 16300413712v 16300415012v 16300416212v 16300417512v 16300418712v 16300420012v 16300421212v 16300422512v 16300423712v 16300425012v 16300426212v 16300427512v 16300428712v 16300430012v 16300431212v 16300432512v 16300435012v 16300437512v 16300440012v 16300442512v 16300445012v 16300450012v 16300455012v 16300460012v
Nominal I.D. (inches) (mm) 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-1/2 3-3/4 4 4-1/4 4-1/2 5 5-1/2 6 15.88 19.05 22.23 25.40 28.58 31.75 34.93 38.10 41.28 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 79.38 82.55 88.90 95.25 101.60 107.95 114.30 127.00 139.70 152.40
Nominal O.D. (inches) (mm) 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 2.75 2.88 3.00 3.13 3.25 3.38 3.50 3.63 3.75 4.00 4.25 4.50 4.88 5.00 5.50 6.00 6.50 28.58 31.75 34.93 38.10 41.28 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 79.38 82.55 85.73 88.90 92.08 95.25 101.60 107.95 114.30 123.83 127.00 139.70 152.40 165.10
Plies 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
Working Pressure (psi) (Mpa) 125 125 125 125 125 125 113 113 106 100 94 88 88 88 75 63 63 63 63 63 50 50 50 38 38 38 38 25 25 25 0.86 0.86 0.86 0.86 0.86 0.86 0.78 0.78 0.73 0.69 0.65 0.61 0.61 0.61 0.52 0.43 0.43 0.43 0.43 0.43 0.34 0.34 0.34 0.26 0.26 0.26 0.26 0.17 0.17 0.17
37
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Blue High Silicone Silicone Nylon -67F to +347F -55C to +175C 50 ft. in a carton
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.19 0.25 0.29 0.35 0.39 0.44 0.49 0.28 0.37 0.43 0.52 0.58 0.65 0.73
Nominal I.D. (inches) (mm) 1/4 3/8 1/2 5/8 3/4 7/8 1 6.35 9.53 12.70 15.88 19.05 22.23 25.40
Nominal O.D. (inches) (mm) 0.56 0.69 0.81 0.94 1.06 1.19 1.34 14.29 17.46 20.64 23.81 26.99 30.16 34.13
Plies 2 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 63 63 63 63 50 50 44 0.43 0.43 0.43 0.43 0.34 0.34 0.30
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Blue High Silicone Silicone Polyester with a helical wire -67F to +347F -55C to +175C 60 ft. Other lengths available 5% cutting charge Contact customer service for minimum run requirements
Min. Bend Radius (inches) (mm) 3.00 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.00 10.00 10.50 11.00 11.50 12.00 16.00 76.20 101.60 114.30 127.00 139.70 152.40 165.10 177.80 190.50 203.20 215.90 228.60 228.60 254.00 266.70 279.40 292.10 304.80 406.40 Weight (lb/ft) (Kg/m) 0.43 0.56 0.61 0.66 0.72 0.76 0.82 0.87 0.93 0.97 1.03 1.05 1.10 1.15 1.34 1.40 1.47 1.52 2.17 0.62 0.83 0.91 0.98 1.07 1.13 1.22 1.29 1.38 1.44 1.53 1.56 1.64 1.71 1.99 2.08 2.19 2.26 3.23
Product Number 16300907560v 16300910060v 16300911260v 16300912560v 16300913760v 16300915060v 16300916260v 16300917560v 16300918760v 16300920060v 16300921260v 16300922560v 16300923760v 16300925060v 16300926260v 16300927560v 16300928760v 16300930060v 16300940060v
Nominal I.D. (inches) (mm) 3/4 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 4 19.05 25.40 28.58 31.75 34.93 38.10 41.28 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 101.60
Nominal O.D. (inches) (mm) 1.19 1.44 1.56 1.69 1.81 1.94 2.06 2.19 2.31 2.44 2.56 2.69 2.81 2.94 3.06 3.19 3.31 3.44 4.44 30.16 36.51 39.69 42.86 46.04 49.21 52.39 55.56 58.74 61.91 65.09 68.26 71.44 74.61 77.79 80.96 84.14 87.31 112.71
Plies 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 75 70 66 58 58 58 55 55 50 47 20 20 43 40 38 38 36 35 30 0.51 0.48 0.45 0.40 0.40 0.40 0.38 0.38 0.34 0.32 0.14 0.14 0.30 0.28 0.26 0.26 0.25 0.24 0.21
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
NBR/SBR blend CR/NBR blend Tire Cord 0F to +212F -18C to +100C 12 ft. and 60 ft. lengths available Contact customer service for minimum run requirements Other lengths available 5% cutting charge
Min.Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.51 0.58 0.60 0.65 0.71 0.74 0.77 0.82 0.88 0.93 0.94 1.05 1.11 1.16 1.22 1.28 1.33 1.39 1.44 1.50 1.56 1.62 1.73 1.84 1.96 2.18 2.41 2.63 2.66 2.86 4.40 4.54 5.25 5.64 6.49 7.05 7.83 8.26 0.76 0.86 0.89 0.97 1.06 1.10 1.15 1.22 1.31 1.38 1.40 1.56 1.65 1.73 1.82 1.90 1.98 2.07 2.14 2.23 2.32 2.41 2.57 2.74 2.92 3.24 3.59 3.91 3.96 4.26 6.55 6.76 7.81 8.39 9.66 10.49 11.65 12.29 Std. Case 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Product Number 12 Feet 16240007512v 16240008712 16240010012 16240010612v 16240011212v 16240012512 16240013112v 16240013712 16240015012 16240016212 16240017512v 16240018712 16240020012 16240021212v 16240022512v 16240023712 16240025012 16240026212v 16240027512v 16240028712v 16240030012 16240032512v 16240035012 16240037512v 16240040012 16240045012 16240050012v 16240055012v 16240055612v 16240060012v 16240066212v 16240070012v 16240080012v 16240086212v 16240010112v 16240010712v 16240012012v 16240012712v
Product Number 60 Feet 16240007560v 16240008760 16240010060 16240010660v 16240011260v 16240012560 16240013160v 16240015060 16240015060 16240016260 16240017560v 16240018760 16240020060 16240021260v 16240022560v 16240023760 16240025060 16240026260v 16240026260v 16240028760v 16240030060 16240032560v 16240035060 16240037560v 16240040060 16240045060 16240050060v 16240055060v 16240055660v 16240060060v
Nominal I.D. (inches) (mm) 3/4 7/8 1 1-1/16 1-1/8 1-1/4 1-5/16 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/4 3-1/2 3-3/4 4 4-1/2 5 5-1/2 5-9/16 6 6-5/8 7 8 8-5/8 10 10-3/4 12 12-3/4 19.05 22.23 25.40 26.99 28.58 31.75 33.34 34.93 38.10 41.28 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 82.55 88.90 95.25 101.60 114.30 127.00 139.70 141.29 152.40 168.28 177.80 203.20 219.08 254.00 273.05 304.80 323.85
Nominal O.D. (inches) (mm) 1.25 1.38 1.50 1.56 1.63 1.75 1.81 2.08 2.20 2.33 2.45 2.57 2.70 2.82 2.95 3.07 3.20 3.33 3.43 3.57 3.70 3.95 4.20 4.45 4.70 5.20 5.70 6.20 6.26 6.26 7.38 7.75 8.75 9.38 10.75 11.50 12.75 13.50 31.75 35.05 38.10 39.62 41.40 44.45 45.97 52.83 55.88 59.18 62.23 65.28 68.58 71.63 74.93 77.98 81.28 84.58 87.12 90.68 93.98 100.33 106.68 113.03 119.38 132.08 144.78 157.48 159.00 159.00 187.45 196.85 222.25 238.25 273.05 292.10 323.85 342.90
Plies 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4
Working Pressure (psi) (Mpa) 150 150 150 150 150 150 150 150 150 150 150 150 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 85 85 75 70 60 50 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.59 0.59 0.52 0.48 0.41 0.34
39
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Branding: Thermoid Mariner Wet Exhaust SAE J2006 R1, Date Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black Medium to Medium-High NBR/SBR blend CR/NBR blend Tire cord 0F to +212F -18C to +100C 12 ft. and 60 ft. lengths available Contact customer service for minimum run requirements Other lengths avaiable 5% cutting charge
Min.Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.61 0.68 0.75 0.78 0.82 0.89 0.93 0.95 1.02 1.05 1.12 1.19 1.25 1.32 1.59 1.67 1.73 1.81 1.88 1.95 2.03 2.10 2.18 2.32 2.47 2.62 2.91 3.21 3.50 3.79 5.47 5.75 6.50 6.98 8.03 8.64 9.59 10.12 0.91 1.01 1.12 1.16 1.22 1.32 1.38 1.41 1.52 1.56 1.67 1.77 1.86 1.96 2.37 2.49 2.57 2.69 2.80 2.90 3.02 3.13 3.24 3.45 3.68 3.90 4.33 4.78 5.21 5.64 8.14 8.56 9.67 10.39 11.95 12.86 14.27 15.06 Std. Case 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Product Number 12 Feet 16242807512v 16242808712v 16242810012v 16242810612v 16242811212v 16242812512v 16242813112v 16242813712v 16242815012v 16242816212v 16242817512v 16242818712v 16242820012v 16242821212v 16242822512v 16242823712v 16242825012v 16242826212v 16242827512v 16242828712v 16242830012v 16242831212v 16242832512v 16242835012v 16242837512v 16242840012v 16242845012v 16242850012v 16242855012v 16242860012v 16242866212v 16242870012v 16242880012v 16242886212v 16242810112v 16242810712v 16242812012v 16242812712v
Nominal O.D. (inches) (mm) 1.38 1.50 1.63 1.69 1.75 1.88 1.94 2.00 2.13 2.25 2.38 2.50 2.63 2.75 2.88 3.00 3.25 3.38 3.50 3.63 3.75 3.88 4.00 4.25 4.50 4.75 5.25 5.75 6.25 6.63 7.63 8.00 9.00 9.63 11.00 11.75 13.00 13.75 34.93 38.10 41.28 42.86 44.45 47.63 49.21 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 82.55 85.73 88.90 92.08 95.25 98.43 101.60 107.95 114.30 120.65 133.35 146.05 158.75 168.28 193.68 203.20 228.60 244.48 279.40 298.45 330.20 349.25
Plies 2 2 2 2 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6
Working Pressure (psi) (Mpa) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 175 175 175 175 175 150 150 150 150 150 150 150 150 150 150 150 150 100 100 90 75 60 50 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.21 1.21 1.21 1.21 1.21 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 0.69 0.69 0.62 0.52 0.41 0.34
16242807560v 3/4 19.05 16242808760v 7/8 22.23 16242810060v 1 25.40 16242810660v 1-1/16 26.99 16242811260v 1-1/8 28.58 16242812560v 1-1/4 31.75 16242813160v 1-5/16 33.34 16242813760v 1-3/8 34.93 16242815060v 1-1/2 38.10 16242816260v 1-5/8 41.28 16242817560v 1-3/4 44.45 16242818760v 1-7/8 47.63 16242820060v 2 50.80 16242821260v 2-1/8 53.98 16242822560v 2-1/4 57.15 16242823760v 2-3/8 60.33 16242825060v 2-1/2 63.50 16242826260v 2-5/8 66.68 16242827560v 2-3/4 69.85 16242828760v 2-7/8 73.03 16242830060v 3 76.20 16242831260v 3-1/8 79.38 16242832560v 3-1/4 82.55 16242835060v 3-1/2 88.90 16242837560v 3-3/4 95.25 16242840060v 4 101.60 16242845060v 4-1/2 114.30 16242850060v 5 127.00 16242855060v 5-1/2 139.70 16242860060v 6 152.40 6-5/8 168.28 7 177.80 8 203.20 8-5/8 219.08 10 254.00 10-3/4 273.05 12 304.80 12-3/4 323.85
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Branding: Thermoid HBD Industries Type 58 Marine Coolant Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black Medium CR CR Multiple plies of polycord -40F to +212F -40C to +100C 50 ft. maximum Also available to meet SAE 20R1 Class C, standard or heavy wall construction
Working Pressure Min.Bend Radius (psi) (Mpa) (inches) (mm) 150 150 150 125 100 100 100 85 75 70 100 100 100 100 1.03 1.03 1.03 0.86 0.69 0.69 0.69 0.59 0.52 0.48 0.69 0.69 0.69 0.69 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.60 0.70 0.90 1.00 1.30 1.70 1.80 2.10 2.60 3.20 2.90 4.00 4.90 5.90 0.89 1.04 1.34 1.49 1.93 2.53 2.68 3.13 3.87 4.76 4.32 5.95 7.29 8.78
Product Number 16245810660v 16245813160v 16245816260v 16245818760v 16245823760v 16245828760v 16245830060v 16245835060v 16245840060v 16245845060v 16245866212v 16245886212v 16245810712v 16245812712v
Nominal I.D. (inches) (mm) 1-1/16 1-5/16 1-5/8 1-7/8 2-3/8 2-7/8 3 3-1/2 4 4-1/2 6-5/8 8-5/8 10-3/4 12-3/4
Nominal O.D. (inches) (mm) 38.89 46.83 54.77 61.91 75.41 88.11 91.28 103.98 118.27 132.56 182.56 234.95 288.93 342.90
Fits Over Pipe I.D. (inches) (mm) 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 6 8 10 12 19.05 25.40 31.75 38.10 50.80 63.50 76.20 88.90 101.60 152.40 203.20 254.00 304.80
Plies 3 4 4 4 4 4 4 4 5 5 4 4 4 5
26.99 1.53 33.34 1.84 41.28 2.16 47.63 2.44 60.33 2.97 73.03 3.47 76.20 3.59 88.90 4.09 101.60 4.66 114.30 5.22 168.28 7.19 219.08 9.25 273.05 11.38 323.85 13.50
41
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Branding:
Bellowsflex -A(xxx) mm (INCA) I.D. SAEJ1527 USCG Type A-2 SAEJ1942 F(xxx) MPA WP SAEJ2006 R2 Thermoid Made In USA (year) Caution Statement
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black High NBR CR Nylon screen with helical wire -20F to +212F -29C to +100C 1/2" and 5/8" I.D. 25 ft. maximum, all others 60 ft. Other lengths available 5% cutting charge Contact customer service for minimum run requirements
Min. Bend Radius (inches) (mm) 2.00 2.00 3.00 3.00 3.00 3.00 3.00 3.00 4.00 4.00 4.00 5.00 5.00 5.00 6.00 6.00 6.00 7.00 8.00 10.00 10.00 11.00 13.00 13.00 14.00 14.00 15.00 16.00 28.00 31.00 33.00 50.80 50.80 76.20 76.20 76.20 76.20 76.20 76.20 101.60 101.60 101.60 127.00 127.00 127.00 152.40 152.40 152.40 177.80 203.20 254.00 254.00 279.40 330.20 330.20 355.60 355.60 381.00 406.40 711.20 787.40 838.20 Weight (lb/ft) (Kg/m) 0.32 0.36 0.48 0.55 0.61 0.63 0.67 0.72 0.76 0.79 0.84 0.90 0.96 1.02 1.07 1.13 1.18 1.19 1.23 1.28 1.34 1.40 1.51 1.57 1.63 1.75 1.98 2.21 2.69 2.94 3.42 0.48 0.54 0.71 0.82 0.91 0.94 1.00 1.07 1.13 1.18 1.25 1.34 1.43 1.52 1.59 1.68 1.76 1.77 1.83 1.90 1.99 2.08 2.25 2.34 2.43 2.60 2.95 3.29 4.00 4.38 5.09
Product Number 16791005025 16791006225 16791007560 16791008760 16791010060 16791010660 16791011260 16791012560 16791013160 16791013760 16791015060 16791016260 16791017560 16791018760 16791020060 16791021260 16791022560 16791023760 16791025060 16791026260 16791027560 16791028760 16791030060 16791031260 16791032560 16791035060 16791040060 16791045060 16791050060 16791055060 16791060060
Nominal I.D. (inches) (mm) 1/2 5/8 3/4 7/8 1 1-1/16 1-1/8 1-1/4 1-5/16 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-1/2 4 4-1/2 5 5-1/2 6 12.70 15.88 19.05 22.23 25.40 26.99 28.58 31.75 33.34 34.93 38.10 41.28 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 79.38 82.55 88.90 101.60 114.30 127.00 139.70 152.40
Nominal O.D. (inches) (mm) 0.88 1.00 1.13 1.25 1.38 1.44 1.50 1.63 1.69 1.75 1.88 2.00 2.13 2.25 2.38 2.50 2.63 2.75 2.88 3.00 3.13 3.25 3.38 3.50 3.63 3.88 4.38 4.88 5.38 5.88 6.38 22.23 25.40 28.58 31.75 34.93 36.51 38.10 41.28 42.86 44.45 47.63 50.80 53.98 57.15 60.33 63.50 66.68 69.85 73.03 76.20 79.38 82.55 85.73 88.90 92.08 98.43 111.13 123.83 136.53 149.23 161.93
Plies 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 60 60 58 55 53 53 50 44 44 44 44 41 41 38 35 34 34 33 30 30 29 29 26 23 21 20 18 16 14 13 11 0.41 0.41 0.40 0.38 0.37 0.37 0.34 0.30 0.30 0.30 0.30 0.28 0.28 0.26 0.24 0.23 0.23 0.23 0.21 0.21 0.20 0.20 0.18 0.16 0.14 0.14 0.12 0.11 0.10 0.09 0.08
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black High NBR CR Tire cord with helical wire -40F to +212F -40C to +100C 60 ft. maximum Other lengths available 5% cutting charge Contact customer service for minimum run requirements
Min. Bend Radius (inches) (mm) 5.00 5.50 6.00 8.00 10.00 11.00 12.00 13.00 14.00 16.00 18.00 127.00 139.70 152.40 203.20 254.00 279.40 304.80 330.20 355.60 406.40 457.20 Weight (lb/ft) (Kg/m) 0.57 0.63 0.70 0.83 1.09 1.24 1.39 1.47 1.61 1.75 1.97 0.85 0.94 1.04 1.24 1.62 1.85 2.07 2.19 2.40 2.60 2.93
Product Number 16795107560v 16795108760v 16795110060 16795112560 16795115060 16795117560v 16795120060v 16795122560v 16795125060v 16795127560v 16795130060v
Nominal I.D. (inches) (mm) 3/4 7/8 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3 19.05 22.23 25.40 31.75 38.10 44.45 50.80 57.15 63.50 69.85 76.20
Nominal O.D. (inches) (mm) 1.31 1.44 1.56 1.81 2.03 2.31 2.56 2.81 3.06 3.31 3.56 33.34 36.51 39.69 46.04 51.59 58.74 65.09 71.44 77.79 84.14 90.49
Plies 2 2 2 2 2 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 300 300 300 300 300 300 300 300 62 60 56 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 0.43 0.41 0.39
43
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
CHEMICAL
44
TRANSPORTER ULTRA-CHEM
Transporter Ultra-Chem hose has been engineered to be extremely flexible. This hose will handle 98% of all common industrial chemicals. Ultra-Chem is ideal for pressure, gravity flow and suction service. This hose has been rated at full vacuum. The green EPDM cover is abrasion and chemical resistant. This hose can also come with a black EPDM cover. Note: Working pressures reflect a permanent type coupling such as swage or internally expanded. For banded type couplings, the working pressure should reflect 65% of the ratings listed. See Chemical Hose Warnings, pages 9 and 128.
Resistance:
Branding: Thermoid HBD Industries Transporter Ultra-Chem XXX PSI WP Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Green High at 70F, not rated at 140F
UHMWPE backed with compatible rubber layer EPDM Multiple synthetic textile cords and a dual wire helix(es). Temperature Range: Maximum temperature limitation +180F (82C) for most chemicals Packaging: 100 ft. maximum
Plies Working Pressure (psi) (Mpa) 250 250 250 250 200 200 150 150 250 1.72 1.72 1.72 1.72 1.38 1.38 1.03 1.03 1.72 Min. Bend Radius (inches) (mm) 4.00 4.00 4.00 6.00 8.00 9.00 12.00 30.00 4.00 101.60 101.60 101.60 152.40 203.20 228.60 304.80 762.00 101.60 Weight (lb/ft) (Kg/m) 0.53 0.75 0.96 1.30 1.77 2.09 2.92 5.77 0.52 0.79 1.12 1.43 1.93 2.63 3.11 4.35 8.59 0.77
Product Number Green 17709008002 17709009002 17709010002 17709012002 17709013002 17709014002 17709016002 17709018002v Black 17709300002
Nominal I.D. (inches) (mm) 1 1-1/4 1-1/2 2 2-1/2 3 4 6 1 25.40 31.75 38.10 50.80 63.50 76.20 101.60 152.40 25.40
Nominal O.D. (inches) (mm) 1.47 1.78 2.08 2.58 3.13 3.66 4.70 6.90 1.47 36.75 44.50 52.00 64.50 78.25 91.50 117.50 172.50 36.75
2 2 2 2 2 2 2 4 2
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
CHEMICAL
Resistance:
Branding: Thermoid HBD Industries Atlas Acid Discharge Hose Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Black Limited
3/16" NR SBR Multiple plies of strong, square-woven duck -40F to +160F -40C to +71C Consult the Chemical Resistance Guide for specific chemical/temperature recommendations. Packaging: 50 ft. lengths Minimum Run: 500 ft./size
Product Number 21204420502 21204421502 21204422502 21204423502 21204424502 21204425502 21204426502 n/a = Not Applicable Nominal I.D. (inches) (mm) 3/4 1 1-1/4 1-1/2 2 2-1/2 3 19.05 25.40 31.75 38.10 50.80 63.50 76.20 Nominal O.D. (inches) (mm) 1.50 1.75 2.00 2.25 2.81 3.31 3.81 38.10 44.45 50.80 57.15 71.44 84.14 96.84 Plies 4 4 4 4 4 4 4 Working Pressure (psi) (Mpa) 150 150 150 100 100 75 75 1.03 1.03 1.03 0.69 0.69 0.52 0.52 Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.70 0.80 0.90 1.10 1.40 1.70 1.90 1.04 1.19 1.34 1.64 2.08 2.53 2.83
Resistance:
Branding: Thermoid HBD Industries Atlas Acid Suction and Discharge Made In USA
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range:
Black Limited
3/16" NR SBR Multiple plies of strong, square-woven duck with helical wire -40F to +160F -40C to +71C Consult the Chemical Resistance Guide for specific chemical/temperature recommendations. Packaging: 50 ft. lengths maximum Minimum Run: Varies with size. Contact customer service for required minimums
Plies 2 3 3 3 3 4 4 4 4 5 5 5 6 Working Pressure (psi) (Mpa) 100 100 75 75 75 75 75 50 50 50 50 50 50 0.69 0.69 0.52 0.52 0.52 0.52 0.52 0.34 0.34 0.34 0.34 0.34 0.34 Min. Bend Radius (inches) (mm) 5.00 7.00 8.00 9.00 12.00 16.00 18.00 25.00 30.00 39.75 48.00 51.75 60.00 127.00 177.80 203.20 228.60 304.80 406.40 457.20 635.00 762.00 1009.65 1219.20 1314.45 1524.00 Weight (lb/ft) (Kg/m) 1.50 2.00 2.60 3.00 3.40 4.20 5.20 5.70 6.90 8.00 11.40 12.40 14.10 2.23 2.98 3.87 4.46 5.06 6.25 7.74 8.48 10.27 11.91 16.97 18.45 20.98
Product Number 21204480502v 21204482502v 21204484502v 21204486502v 11404532502v 11404534502v 11404536502v 11404538502v 11404541502v 11404543502v 11404546502v 11404548502v 11404550502v
Nominal I.D. (inches) (mm) 1-1/2 2 2-1/2 3 3-1/2 4 4-1/2 5 6 6-5/8 8 8-5/8 10 38.10 50.80 63.50 76.20 88.90 101.60 114.30 127.00 152.40 168.28 203.20 219.08 254.00
Nominal O.D. (inches) (mm) 2.38 2.88 3.50 3.31 4.50 5.00 5.56 6.13 7.13 7.81 9.31 9.94 11.38 60.33 73.03 88.90 84.14 114.30 127.00 141.29 155.58 180.98 198.44 236.54 252.41 288.93
45
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
CHEMICAL
46
Resistance:
Branding: Thermoid HBD Industries Commander Acid Discharge Hose Hypalon Tube Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Black Medium
3/16" CSM compound CR Multiple plies of strong, square-woven duck -40F to +160F -40C to +71C Consult the Chemical Resistance Guide for specific chemical/temperature recommendations. Packaging: 50 ft. lengths Minimum Run: 500 ft./size
Product Number 21204435502v 21204436502v 21204437502v 21204438502v 21204439502v 21204440502v 21204441502v 21204442502v Nominal I.D. (inches) (mm) 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 12.70 19.05 25.40 31.75 38.10 50.80 63.50 76.20 Nominal O.D. (inches) (mm) 1.25 1.50 1.75 2.00 2.25 2.81 3.31 3.81 31.75 38.10 44.45 50.80 57.15 71.44 84.14 96.84 Plies 4 4 4 4 4 4 4 4 Working Pressure (psi) (Mpa) 150 150 150 150 100 100 75 75 1.03 1.03 1.03 1.03 0.69 0.69 0.52 0.52 Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.50 0.60 0.80 0.90 1.00 1.40 1.70 2.00 0.74 0.89 1.19 1.34 1.49 2.08 2.53 2.98
Resistance:
Branding: Thermoid HBD Industries Commander Acid Suction and Discharge Hose Hypalon Tube Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Black Medium
3/16" CSM compound CR Multiple plies of strong, square-woven duck with helical wire -40F to +160F -40C to +71C Consult the Chemical Resistance Guide for specific chemical/temperature recommendations. Packaging: 50 ft. lengths maximum Minimum Run: Varies with size. Contact customer service for required minimums
Plies 2 3 3 3 3 4 4 4 4 5 5 5 6 Working Pressure (psi) (Mpa) 100 100 75 75 75 75 75 50 50 50 50 50 50 0.69 0.69 0.52 0.52 0.52 0.52 0.52 0.34 0.34 0.34 0.34 0.34 0.34 Min. Bend Radius (inches) (mm) 5.00 7.00 8.00 9.00 12.00 16.00 18.00 25.00 30.00 39.75 48.00 51.75 60.00 127.00 177.80 203.20 228.60 304.80 406.40 457.20 635.00 762.00 1009.65 1219.20 1314.45 1524.00 Weight (lb/ft) (Kg/m) 1.90 2.70 3.20 3.80 4.20 5.30 6.40 7.30 8.50 9.80 13.30 15.00 17.00 2.83 4.02 4.76 5.66 6.25 7.89 9.52 10.86 12.65 14.58 19.79 22.32 25.30
Product Number 21204460502v 21204462502v 21204464502v 21204466502v 11404468502v 11404470502v 11404472502v 11404474502v 11404476502v 11404478502v 11404480502v 11404482502v 11404485502v
Nominal I.D. (inches) (mm) 1-1/2 2 2-1/2 3 3-1/2 4 4-1/2 5 6 6-5/8 8 8-5/8 10 38.10 50.80 63.50 76.20 88.90 101.60 114.30 127.00 152.40 168.28 203.20 219.08 254.00
Nominal O.D. (inches) (mm) 2.38 3.06 3.50 4.00 4.50 5.06 5.69 6.19 7.19 7.81 9.31 9.94 11.38 60.33 77.79 88.90 101.60 114.30 128.59 144.46 157.16 182.56 198.44 236.54 252.41 288.93
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
CHEMICAL
TRANSPORTER CHEMICAL B
Transporter Chemical B hose is a general purpose hose designed to handle strong and oxidizing acids, esters, ketones and alcohols. This hose features an EPDM cover that is resistant to heat, chemicals and weathering. This hose is rated at full vacuum. Chemical B hose also features a reinforcement of a spiral steel helix between synthetic textile plies. See Chemical Hose Warnings, pages 9 and 128.
Resistance:
Branding: Thermoid HBD Industries Transporter Chemical B WP Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Brown Limited
IIR EPDM Spiral steel wire helix(es) between synthetic textile plies Temperature Range: -40F to +200F -40C to +93C Consult the Chemical Resistance Guide for specific chemical/temperature recommendations. Packaging: 1" I.D. 50 ft. 1-1/2" - 4" I.D. 100 ft.
Product Number 17704010002v 17704015002v 17704020002 17704030002 17704040002 Nominal I.D. (inches) (mm) 1 1-1/2 2 3 4 25.40 38.10 50.80 76.20 101.60 Nominal O.D. (inches) (mm) 1.50 2.03 2.56 3.63 4.69 38.10 51.59 65.09 92.08 119.06 Plies 2 2 2 2 2 Working Pressure (psi) (Mpa) 150 150 150 150 100 1.03 1.03 1.03 1.03 0.69 Min. Bend Radius (inches) (mm) 3.00 4.00 6.00 9.00 12.00 76.20 101.60 152.40 228.60 304.80 Weight (lb/ft) (Kg/m) 0.65 0.88 1.23 2.20 3.00 0.97 1.31 1.83 3.27 4.46
TRANSPORTER CHEMICAL H
Transporter Chemical H hose is recommended to handle many inorganic acids, bases, alcohols, oils, fats, chemicals, greases and solvents. This hose features a CR cover that is weather, ozone and oil resistant. The tube compound is chemical, heat and abrasion resistant. See Chemical Hose Warnings, pages 9 and 128.
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Yellow Medium
Resistance:
CSM Black CR Spiral steel wire helix(es) between synthetic textile plies Temperature Range: -40F to +250F -40C to +121C Consult the Chemical Resistance Guide for specific chemical/temperature recommendations. Packaging: 100 ft. maximum Available in straight ends, uncapped only
Product Number 17703010002v 17703015002 17703020002 17703030002 17703040002v Nominal I.D. (inches) (mm) 1 1-1/2 2 3 4 25.40 38.10 50.80 76.20 101.60 Nominal O.D. (inches) (mm) 1.50 2.00 2.50 3.56 4.63 38.10 50.80 63.50 90.49 117.48 Plies 2 2 2 2 2 Working Pressure (psi) (Mpa) 200 150 150 150 100 1.38 1.03 1.03 1.03 0.69 Min. Bend Radius (inches) (mm) 2.50 4.50 6.00 9.00 12.00 63.50 114.30 152.40 228.60 304.80 Weight (lb/ft) (Kg/m) 0.57 0.83 1.08 1.81 2.45 0.85 1.24 1.61 2.69 3.65
47
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
CHEMICAL
48
TRANSPORTER CHEMICAL V
Transporter Chemical V hose is capable of handling aromatic and alphatic hydrocarbons and halo generated hydrocarbons. Chemical V hose will also handle animal oil, vegetable oil, and a wide range of chemicals. The NBR/PVC cover is both oil and abrasion resistant. The reinforcement of a spiral steel helix between synthetic textile plies enables this hose to be rated at full vacuum. See Chemical Hose Warnings, pages 9 and 128.
Resistance:
Orange Medium
FKM, 11/2" and 2" I.D. 1/8" thick 3" I.D. and larger 3/16" thick Exceeds RMA Class A Cover: NBR/PVC Reinforcement: Spiral steel wire helix(es) between synthetic textile plies Temperature Range: -20F to +250F -29C to +121C Consult the Chemical Resistance Guide for specific chemical/temperature recommendations. Packaging: 100 ft. maximum Available in straight ends, uncapped only
Product Number 17701115002v 17701120002v 17701130002v 17701140002v Nominal I.D. (inches) (mm) 1-1/2 2 3 4 38.10 50.80 76.20 101.60 Nominal O.D. (inches) (mm) 2.06 2.56 3.69 4.69 52.39 65.09 93.66 119.06 Plies 2 2 2 2 Working Pressure (psi) (Mpa) 150 150 150 100 1.03 1.03 1.03 0.69 Min. Bend Radius (inches) (mm) 4.00 6.00 9.00 12.00 101.60 152.40 228.60 304.80 Weight (lb/ft) (Kg/m) 1.20 1.50 2.40 3.40 1.79 2.23 3.57 5.06
TRANSPORTER MULTI-CHEM
Transporter Multi-Chem hose has been designed to be able to transfer chemicals and solvents. The XLPE tube is capable of resisting approximately 90% of all industrial chemicals. Exceptions include elevated temperatures and strong oxidizing acids such as nitric acid and chromic. The maximum temperature rating for most chemicals is 150F. The green EPDM cover is abrasion and chemical resistant. This is a full vacuum hose. Note: Working pressures reflect a permanent type coupling such as swage or internally expanded. For banded type couplings, the working pressure should reflect 65% of the ratings listed. See Chemical Hose Warnings, pages 9 and 128.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Green High at 70F, not rated at 140F XLPE EPDM Synthetic textile cords with wire helix(es) Maximum temperature limitation 150F (66C) for most chemicals 100 ft. maximum
Min. Bend Radius (inches) (mm) 5.00 7.00 8.00 9.00 12.00 16.00 21.00 127.00 177.80 203.20 228.60 304.80 406.40 533.40 Weight (lb/ft) (Kg/m) 0.80 1.00 1.10 1.70 2.38 2.70 3.50 1.19 1.49 1.64 2.53 3.54 4.02 5.21
Product Number Black N N N N N N N Green 17704600002 17704601002v 17704602002 17704603002 17704608002v 17704604002v 17704605002v
Nominal I.D. (inches) (mm) 1 1-1/4 1-1/2 2 2-1/2 3 4 25.40 31.75 38.10 50.80 63.50 76.20 101.60
Nominal O.D. (inches) (mm) 1.69 1.94 2.19 2.81 3.34 3.91 4.81 42.86 49.21 55.56 71.44 84.93 99.22 122.24
Plies
Working Pressure (psi) (Mpa) 200 200 200 200 150 150 150 1.38 1.38 1.38 1.38 1.03 1.03 1.03
2 2 2 2 2 2 2
N = Non-Stock. All sizes available in black cover, contact Salisbury v = Make To Order (MTO)
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
DOCK LOADING
Resistance:
Branding: Thermoid HBD Industries Inc. Black Racer Oil S & D Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Couplings: Black High NBR, RMA Class A CR Polyester tire cord, with a wire helix(es) -20F to +200F -29C to +93C 100 ft. maximum Hand built $250.00 minimum order per size Constrictor swage couplings
Min. Bend Radius (inches) (mm) 22.00 35.00 46.00 558.80 889.00 1168.40 Weight (lb/ft) (Kg/m) 4.20 7.60 10.60 6.25 11.31 15.78
Nominal O.D. (inches) (mm) 5.00 7.13 9.19 127.00 180.98 233.36
Plies 4 4 4
Working Pressure (psi) (Mpa) 200 200 200 1.38 1.38 1.38
Fixed Flanges
Product Number 34941040001v 34941060001v 34941080001v
v = Make To Order (MTO)
Floating Flanges
Size 4 6 8 Product Number 34942040001 34942060001 34942080001 Size 4 6 8
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Couplings:
Black High at +70F, not rated at +140F UHMWPE CR Single steel wire helix(es) spiralled between multiple plies of synthetic tire cord -20F to +180F -29C to +82C 50 ft. maximum Hand built $250.00 minimum order per size Swaged
Min. Bend Radius (inches) (mm) 36.00 48.00 64.00 80.00 914.40 1219.20 1625.60 2032.00 Weight (lb/ft) (Kg/m) 5.20 10.70 14.80 20.70 7.74 15.92 22.03 30.81
Nominal O.D. (inches) (mm) 5.25 7.38 9.63 11.94 133.35 187.33 244.48 303.21
Plies 4 4 4 6
Working Pressure (psi) (Mpa) 200 200 200 200 1.38 1.38 1.38 1.38
49
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
DOCK LOADING
50
Resistance:
Branding:
Thermoid/HBD Industries Hy-Flex OS&D 275 psi WP Conforms to USCG 33 CFR 1545 suitable for up to 100% aromatics Made In USA
Resistance:
Branding:
Thermoid/HBD Industries Hy-Flex OS&D 300 psi WP Conforms to USCG 33 CFR 1545 suitable for up to 100% aromatics Made In USA
Black High
Round, galvanized bore wire, plain unbonded nylon liner, UHMWPE liner Cover: CR Reinforcement: Polyester tire cord, high strength steel wire helix(es) Flow Velocity: 35 Ft/Second maximum Temperature Range: -20F to +180F -29C to +82C Packaging: Crated Couplings: Swage. Fixed or floating 150# or 300# flange each end
HY-FLEX 200
Product Number 34854210502v 34854215502v 34854220502v 34854225502v Nominal I.D. (inches) (mm) 4 6 8 10 101.60 152.40 203.20 254.00 Nominal O.D. (inches) (mm) 5.19 7.50 9.75 11.94 131.76 190.50 247.65 303.21 Plies 2 2 4 6 Working Pressure (psi) (Mpa) 200 200 200 200 1.38 1.38 1.38 1.38 Min. Bend Radius (inches) (mm) 14.00 21.00 29.00 36.00 355.60 533.40 736.60 914.40 Weight (lb/ft) (Kg/m) 4.50 8.40 14.00 22.50 6.70 12.50 20.84 33.49
HY-FLEX 275
Product Number 34854240502v 34854245502v 34854250502v 34854255502v Nominal I.D. (inches) (mm) 4 6 8 10 101.60 152.40 203.20 254.00 Nominal O.D. (inches) (mm) 5.25 7.50 9.94 11.94 133.35 190.50 252.41 303.21 Plies 4 4 4 6 Working Pressure (psi) (Mpa) 275 275 275 275 1.90 1.90 1.90 1.90 Min. Bend Radius (inches) (mm) 16.00 21.00 31.00 38.00 406.40 533.40 787.40 965.20 Weight (lb/ft) (Kg/m) 4.50 8.40 16.00 22.50 6.70 12.50 23.81 33.49
HY-FLEX 300
Product Number 34854270502v 34854275502v 34854280502v 34854285502v Nominal I.D. (inches) (mm) 4 6 8 10 101.60 152.40 203.20 254.00 Nominal O.D. (inches) (mm) 5.25 7.50 9.94 11.94 133.35 190.50 252.41 303.21 Plies 4 4 6 6 Working Pressure (psi) (Mpa) 300 300 300 300 2.07 2.07 2.07 2.07 Min. Bend Radius (inches) (mm) 16.00 23.00 31.00 38.00 406.40 584.20 787.40 965.20 Weight (lb/ft) (Kg/m) 4.50 8.40 15.00 22.50 6.70 12.50 22.32 33.49
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
DOCK LOADING
SAFETYFLEX
Safetyflex is a premium hose used in the loading and unloading of gasoline, oil, and other petroleum products at dock installations. This hose features exceptional strength (a 13:1 safety factor) that is much greater than conventional hose. Safetyflex features amazing flexibility and durability with a unique coupling design that protects against blow-offs and leaks. The CR cover is designed to resist abrasion, weather, oil and gasoline. The reinforcement of layers of spiraled high-tensile steel wire, synthetic fabric plies between the wire and tube, provide exceptional strength, long life, maximum flexibility, and guards against bursting even at high working pressures. Safetyflex, like all Thermoid dock loading hoses, meets all U.S. Coast Guard requirements.
Resistance:
G
Branding: Thermoid HBD Industries Safetyflex Oil Service 300 PSI WP Made In USA
Black High
NBR, RMA Class A - other elastomers available upon request CR Layers of spiralled high-tensile steel wire embedded in the hose body with a rubber cushion between each ply Flow Velocity: 50 Ft/Second maximum Temperature Range: -20F to +200F -29C to +93C Packaging: 100 ft. maximum Hand built $250.00 minimum order per size
Plies 4 4 6 8 Working Pressure (psi) (Mpa) 300 300 300 300 2.07 2.07 2.07 2.07 Min. Bend Radius (inches) (mm) 12.00 16.00 24.00 32.00 304.80 406.40 609.60 812.80 Weight (lb/ft) (Kg/m) 6.90 7.50 15.70 22.70 10.27 11.16 23.69 40.38
Nominal O.D. (inches) (mm) 4.44 5.19 7.50 9.69 112.71 131.76 190.50 246.06
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black High NBR, RMA Class A CR, taped, wrapped exterior finish Multiple plies of plated steel wire -20F to +200F -29C to +93C 100 ft. maximum Hand built $250.00 minimum order per size Pressures up to 2500 psi WP in sizes up to 8" I.D. are also available. Contact Salisbury customer service. Straight end hose or coupled assemblies shipped on reels or in crates. 8" I.D. hose or assemblies over 60 ft. long require special packaging or shipping.
Min. Bend Radius (inches) (mm) 16.00 24.00 32.00 406.40 609.60 812.80 Weight (lb/ft) (Kg/m) 7.80 14.10 22.40 11.61 23.69 40.38
Nominal O.D. (inches) (mm) 5.19 7.50 9.75 131.76 190.50 247.65
Plies 4 6 8
Working Pressure (psi) (Mpa) 1500 1500 1500 10.34 10.34 10.34
51
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
DOCK LOADING
52
Resistance:
Branding: Thermoid HBD Industries Submarine Service 225# PSI Made In USA
Black High
NBR, RMA Class A - other elastomers available upon request CR, double thickness (.282" with nylon breaker) Galvanized steel wire helix(es) spiralled between multiple plies of synthetic cord Flow Velocity: 70 Ft/Second maximum Temperature Range: -20F to +180F -29C to +82C Packaging: 50 ft. maximum Hand built $250.00 minimum order per size Couplings: BIN. Available to meet OCIMF specifications with galvanized weld neck flanges plus x-ray tested welds
Plies 6 6 6 8 Working Pressure (psi) (Mpa) 225 225 225 225 1.55 1.55 1.55 1.55 Min. Bend Radius (inches) (mm) 24.00 32.00 40.00 48.00 609.60 812.80 1016.00 1219.20 Weight (lb/ft) (Kg/m) 15.70 22.30 29.10 39.40 23.37 33.19 43.31 58.64
Nominal O.D. (inches) (mm) 8.34 10.44 12.38 14.88 423.86 265.11 314.33 377.83
Resistance:
Branding: Thermoid HBD Industries Tankmaster Hot Asphalt Made In USA -20F to +350F Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Black High
CR CR Single wire helix(es) spiralled between multiple plies of synthetic cord. Temperature Range: -20F to +350F -29C to +177C Packaging: 100 ft. maximum Hand built $250.00 minimum order per size Couplings: Swaged couplings or built-in nipples
Plies 4 4 6 8 Working Pressure (psi) (Mpa) 200 200 200 200 1.38 1.38 1.38 1.38 Min. Bend Radius (inches) (mm) 24.00 36.00 48.00 60.00 609.60 914.40 1219.20 1524.00 Weight (lb/ft) (Kg/m) 5.40 11.50 17.50 22.50 8.04 17.11 26.04 33.49
Nominal O.D. (inches) (mm) 5.06 7.56 9.63 11.88 128.59 192.09 244.48 301.63
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
DOCK LOADING
Resistance:
Branding: Thermoid HBD Industries Tankmaster K200 Oil Suction & Discharge 200 PSI Smooth Bore Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Black High
NBR, RMA Class A CR - corrugated, double pitch Dual steel wire helix(es) spiralled between multiple plies of spiral tire cords Flow Velocity: 50 Ft/Second maximum Temperature Range: -20F to +200F -29C to +93C Packaging: 100 ft. maximum Hand built $250.00 minimum order per size Couplings: Swage only
Plies 4 4 4 6 Working Pressure (psi) (Mpa) 200 200 200 200 1.38 1.38 1.38 1.38 Min. Bend Radius (inches) (mm) 15.00 22.00 30.00 36.00 381.00 558.80 762.00 914.40 Weight (lb/ft) (Kg/m) 5.00 9.30 14.20 20.00 7.44 13.84 21.13 29.77
Nominal O.D. (inches) (mm) 5.00 7.31 9.63 11.88 127.00 185.74 244.48 301.63
Resistance:
Branding: Thermoid HBD Industries Tankmaster Oil Discharge Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Flow Velocity: Temperature Range: Packaging: Couplings: Black High NBR, RMA Class A CR Multiple plies of synthetic cord 50 Ft/Second maximum -20F to +200F -29C to +93C 100 ft. maximum Swaged couplings through 10" I.D. or built-in nipples through 12" I.D.
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 2.80 4.90 7.70 8.30 13.30 4.17 7.29 11.46 12.35 19.79
Nominal O.D. (inches) (mm) 4.88 7.00 9.31 11.19 13.41 123.83 177.80 236.54 284.16 340.52
Plies 4 4 6 6 6
Working Pressure (psi) (Mpa) 200 200 200 200 200 1.38 1.38 1.38 1.38 1.38
53
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
DOCK LOADING
54
Resistance:
D
Branding: Thermoid HBD Industries Tankmaster 200 Made In USA Cover Color: Oil Resistance: Construction: Tube: Black High
FKM Fluoroelastomer Exceeds RMA Class A Cover: CR Reinforcement: Single wire helix(es) spiralled between multiple plies of synthetic cord Flow Velocity: 50 Ft/Second maximum Temperature Range: -20F to +200F -29C to +93C Packaging: 100 ft. maximum Couplings: Swaged
Product Number 11434950502v 11434955502v 11434960502v 11434965502v Nominal I.D. (inches) (mm) 4 6 8 10 101.60 152.40 203.20 254.00 Nominal O.D. (inches) (mm) 5.31 7.63 9.63 11.88 134.94 193.68 244.48 301.63 Plies 4 4 4 6 Working Pressure (psi) (Mpa) 200 200 200 200 1.38 1.38 1.38 1.38 Min. Bend Radius (inches) (mm) 24.00 36.00 48.00 60.00 609.60 914.40 1219.20 1524.00 (lb/ft) 7.50 11.60 20.30 28.10 Weight (Kg/m) 11.16 17.26 30.21 41.82
Resistance:
Branding: Thermoid HBD Industries Tankmaster 200 Smooth Bore Oil Suction & Discharge 200 PSI Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Black High
NBR, RMA Class A - other elastomers available upon request CR Multiple plies of synthetic cord with wire helix(es) embedded in the hose body Flow Velocity: 50 Ft/Second maximum Temperature Range: -20F to +200F -29C to +93C Packaging: 100 ft. maximum Hand built $250.00 minimum order per size Ends: Built-in nipples through 12" I.D. Swaged couplings through 10" I.D.
Product Number 11434480502v 11434482502v 11434484502v 11434486502v 11434488502v Nominal I.D. (inches) (mm) 4 6 8 10 12 101.60 152.40 203.20 254.00 304.80 Nominal O.D. (inches) (mm) 5.00 7.31 9.63 11.88 14.03 127.00 185.74 244.48 301.63 356.39 Plies 4 4 4 6 6 Working Pressure (psi) (Mpa) 200 200 200 200 200 1.38 1.38 1.38 1.38 1.38 Min. Bend Radius (inches) (mm) 24.00 36.00 48.00 60.00 72.00 609.60 914.40 1219.20 1524.00 1828.80 (lb/ft) 6.00 10.50 15.10 22.00 30.50 Weight (Kg/m) 8.93 15.63 22.47 32.74 45.39
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
FOOD INDUSTRY
FISH SUCTION
Fish Suction Hose is designed for the vacuum removal of fish from a ships hold. The CR tube and cover are cut and abrasion resistant. This hose can come with a variety of ends; enlarged, straight or BIN with flanges. Fish Suction hose is rated at full vacuum since it is constructed with a reinforcement of a spring steel wire helix between multiple plies of reinforcement.
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Black Medium
Resistance:
Branding: Thermoid HBD Industries Fish Suction Hose 100 psi WP CRTube Made In USA
1/4" CR CR Spring steel wire helix(es) spiralled between multiple plies of polyester cord Temperature Range: -40F to +180F -40C to +82C Packaging: Make To Order Hand built $250.00 minimum order per size
Product Number 11465520502 11465522502 11465524502 Nominal I.D. (inches) (mm) 8 10 12 203.20 254.00 304.80 Nominal O.D. (inches) (mm) 9.63 12.00 14.13 244.48 304.80 358.78 Plies 4 5 6 Working Pressure (psi) (Mpa) 100 100 100 0.69 0.69 0.69 Min. Bend Radius (inches) (mm) 80.00 100.00 120.00 2032.00 2540.00 3048.00 Weight (lb/ft) (Kg/m) 19.00 25.00 31.00 28.28 37.21 46.14
KOROBRAID TUBING
Korobraid Tubing features a specially reinforced polyester cord braided within the PVC tube wall. This tubing will withstand about four times the normal working pressure. The PVC tube and cover is non-toxic, meets FDA requirements and also offers excellent clarity. Physical Properties
Safety Factor Odor Taste Flame-proofness Minimum Bend Radius 4:1 None None Self-extinguishing 5 x I.D. Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Product Number 19340253002 19340383002 19340503002 19340612002 19340752002 19341002002v Nominal I.D. (inches) (mm) 1/4 3/8 1/2 5/8 3/4 1 6.35 9.53 12.70 15.88 19.05 25.40 Nominal O.D. (inches) (mm) 0.50 0.63 0.81 1.00 1.00 1.50 12.70 15.88 20.64 25.40 25.40 38.10 Wall Thickness 1/8 1/8 1/8 3/16 1/8 1/4
Resistance:
Branding: None
Clear Medium PVC PVC Polyester cord -20 to +120F -29C to +49C Full coil shipments only
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/Cft) (Kg/m) .08 .11 .17 .26 .30 .39 0.12 0.16 0.25 0.39 0.47 0.58
Working Pressure (psi) (Mpa) 350 275 250 225 200 150 2.41 1.89 1.72 1.55 1.38 1.03
55
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
FOOD INDUSTRY
56
KOROKLEAR TUBING
Koroklear is a non-toxic tubing which meets the criteria requirements of FDA and the 3A Plastics Standard for Milk Products. Koroklear is made from crystal clear, tough formulation PVC. Physical Properties
Durometer, Shore "A" Specific Gravity Ultimate Tensile Strength (psi) Ultimate Elongation (%) 100% Modulus ASTM-D-676 ASTM-D-792-66 ASTM-D-412 ASTM-D-412 ASTM-D-412 70 1.23 2400 390 1200
Resistance:
Branding: None
Recommended working pressure for intermittent pressure only. The figures on the chart are based on 70F temperature.
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Clear Medium PVC PVC N/A 0F to +100F -18C to +38C Full carton shipments only P/Ns KK1 through KK37 100 ft. per carton Larger sizes are packed 50 ft. per carton Make-To-Order (MTO) orders have a stand alone minimum charge of $100.00
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/Cft) (Kg/m) .02 .04 .05 .05 .07 .04 .07 .05 .08 .12 .08 .14 .17 .21 .26 .24 .27 .56 0.03 0.06 0.07 0.07 0.10 0.06 0.10 0.07 0.12 0.18 0.12 0.21 0.25 0.31 0.39 0.36 0.40 0.83
Product Number 19330204002 19330304002 19330306002 19330308002 19330406002 19330504002 19330506002 19330604002 19330606002 19330608002 19330804002 19330808002 19331008002 19331208002 19331210002 19331408002 19331608002 19331616002 n/a = Not Applicable
Nominal I.D. (inches) (mm) 1/8 3/16 3/16 3/16 1/4 5/16 5/16 3/8 3/8 3/8 1/2 1/2 5/8 3/4 3/4 7/8 1 1 3.18 4.76 4.76 4.76 6.35 7.94 7.94 9.53 9.53 9.53 12.70 12.70 15.88 19.05 19.05 22.23 25.40 25.40
Nominal O.D. (inches) (mm) 0.25 0.31 0.38 0.44 0.44 0.44 0.50 0.50 0.56 0.63 0.63 0.75 0.88 1.00 1.06 1.13 1.25 1.50 6.35 7.94 9.53 11.11 11.11 11.11 12.70 12.70 14.29 15.88 15.88 19.05 22.23 25.40 26.99 28.58 31.75 38.10
Wall Thickness 1/16 1/16 3/32 1/8 3/32 1/16 3/32 1/16 3/32 1/8 1/16 1/8 1/8 1/8 5/32 1/8 1/8 1/4
Working Pressure (psi) (Mpa) 68 55 70 80 60 50 60 40 50 65 30 45 40 35 40 30 28 50 0.47 0.38 0.48 0.55 0.41 0.34 0.41 0.28 0.34 0.45 0.21 0.31 0.28 0.24 0.28 0.21 0.19 0.34
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
FOOD INDUSTRY
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Clear Medium PVC PVC Helical wire 0F to +150F -18C to +66C Coils, 100 ft. maximum, 1" to 4" I.D.
150 Degrees F Min.Bend Radius Weight (inches) (mm) (lb/ft) (Kg/m) 1.90 2.70 2.80 3.90 4.70 6.10 9.10 48.26 68.58 71.12 99.06 119.38 154.94 231.14 0.26 0.37 0.44 0.74 1.01 1.21 2.01 0.39 0.55 0.65 1.10 1.50 1.80 2.99
72 Degrees F Product Number 19131000002 19131250002v 19131500002v 19132000002 19132500002v 19133000002v 19134000002v n/a = Not Applicable Nominal I.D. (inches) (mm) 1 25.40 1-1/4 31.75 1-1/2 38.10 2 50.80 2-1/2 63.50 3 76.20 4 101.60 Nominal O.D. (inches) (mm) 1.24 1.54 1.82 2.39 2.93 3.43 4.53 31.50 39.12 46.23 60.71 74.42 87.12 115.06 Plies n/a n/a n/a n/a n/a n/a n/a
Working Pressure Working Pressure (psi) (Mpa) (psi) (Mpa) 86 79 72 72 72 62 55 0.59 0.54 0.50 0.50 0.50 0.43 0.38 20 20 20 20 20 15 15 0.14 0.14 0.14 0.14 0.14 0.10 0.10
Resistance:
Branding: Thermoid HBD Industries Transporter Food Discharge FDA Nitrile Tube Made In USA
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Product Number 17752020002v 17752025002v 17752030002v 17752040002v Nominal I.D. (inches) (mm) 2 2-1/2 3 4 50.80 63.50 76.20 101.60 Nominal O.D. (inches) (mm) 2.41 2.94 3.44 4.44 61.12 74.61 87.31 112.71 Plies 2 2 2 2
Gray Limited RMA Class A/B, FDA White, NBR Gray NBR/PVC with green stripe Synthetic textile plies -30F to +200F -34C to +93C 100 ft. lengths
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.80 1.00 1.20 1.70 1.19 1.49 1.79 2.53
Working Pressure (psi) (Mpa) 150 150 150 100 1.03 1.03 1.03 0.69
57
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
FOOD INDUSTRY
58
Resistance:
Branding: Thermoid HBD Industries Transporter Food Suction White Nitrile Tube WP Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: White Limited RMA Class A/B, FDA White, NBR NBR/PVC Corrugated Spiral steel wire between synthetic textile plies -30F to +200F -34C to +93C 100 ft. lengths; minimum run 1200 ft. per size
Min. Bend Radius (inches) (mm) 4.00 4.50 6.00 7.50 9.00 12.00 101.60 114.30 152.40 190.50 228.60 304.80 Weight (lb/ft) (Kg/m) 0.80 1.00 1.20 1.70 2.10 2.80 1.19 1.49 1.79 2.53 3.13 4.17
Nominal I.D. (inches) (mm) 1-1/4 1-1/2 2 2-1/2 3 4 31.75 38.10 50.80 63.50 76.20 101.60
Nominal O.D. (inches) (mm) 1.81 2.06 2.56 3.13 3.63 4.69 46.04 52.39 65.09 79.38 92.08 119.06
Plies 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 150 150 150 150 150 100 1.03 1.03 1.03 1.03 1.03 0.69
Resistance:
Branding: Thermoid HBD Industries Transporter Food Suction White Nitrile Tube WP Made In USA
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Gray Limited RMA Class A/B, FDA White, NBR Gray NBR/PVC Smooth Spiral steel wire between synthetic textile plies -30F to +200F -34C to +93C 100 ft. lengths
Min. Bend Radius (inches) (mm) 4.50 6.00 9.00 12.00 114.30 152.40 228.60 304.80 Weight (lb/ft) (Kg/m) 1.00 1.20 2.20 2.90 1.49 1.79 3.27 4.32
Nominal O.D. (inches) (mm) 2.06 2.56 3.63 4.69 52.39 65.09 92.08 119.06
Plies 2 2 2 2
Working Pressure (psi) (Mpa) 150 150 150 100 1.03 1.03 1.03 0.69
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
FOOD INDUSTRY
Resistance:
Branding: Thermoid/HBD Industries Inc. Gray Shadow Food 150 PSI WP Made In USA Cover Color: Oil Resistance: Construction: Tube: Gray Limited
Sizes 1-1/2", 2", 2-1/2" have a 3/32" thick tube RMA Class A/B, NBR Cover: NBR/PVC, gray, deep corrugations with a flat hose exterior Reinforcement: Multiple synthetic textile colors with dual wire helix(es) Temperature Range: -30F to +200F -34C to +93C Packaging: 100 ft. lengths; minimum run is 1200 ft. per size
Plies 2 2 2 2 2 Working Pressure (psi) (Mpa) 150 150 150 150 150 1.03 1.03 1.03 1.03 1.03 Min. Bend Radius (inches) (mm) 3.00 4.00 5.00 6.00 8.00 76.20 101.60 127.00 152.40 203.20 Weight (lb/ft) (Kg/m) 1.20 1.60 2.00 2.30 3.40 1.79 2.38 2.98 3.42 5.06
Nominal I.D. (inches) (mm) 1-1/2 2 2-1/2 3 4 38.10 50.80 63.50 76.20 101.60
Nominal O.D. (inches) (mm) 2.19 2.69 3.22 3.72 4.80 55.56 68.26 81.76 94.46 121.84
Resistance:
Branding: Thermoid HBD Industries Type 95 Food Handling Hose Made In USA
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Gray Limited 3/16" thick amber colored NR, non-toxic 1/16" thick gray SBR rubber corrugated Two to three plies of fabric with helical wire -40F to +160F -40C to +71C 50 ft. lengths maximum, for flour use 25 ft. maximum Hand built $250.00 minimum order per size Specify static ground wire, if required. Will be built and grounded no charge
Min. Bend Radius (inches) (mm) 18.00 24.00 30.00 36.00 457.20 609.60 762.00 914.40 Weight (lb/ft) (Kg/m) 2.20 2.70 3.40 4.20 3.27 4.02 5.06 6.25
Nominal O.D. (inches) (mm) 3.88 4.88 6.00 7.00 98.43 123.83 152.40 177.80
Plies 2 2 3 3
59
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
FOOD INDUSTRY
60
Resistance:
Branding: Thermoid HBD Industries Type 96 Food Handling Hose Made In USA Cover Color: Oil Resistance: Construction: Tube: Gray Limited
Sizes 1-1/2", 2", 2-1/2" have a 3/32" thick tube All other sizes have a 1/8" thick tube Amber colored NR Cover: 1/16" thick gray SBR rubber corrugated Reinforcement: Two to three plies of fabric with helical wire Temperature Range: -40F to +160F -40C to +71C Packaging: 50 ft. lengths maximum, for flour use 25 ft. maximum Hand built $250.00 minimum order per size Specify static ground wire, if required. Will be built and grounded no charge
Plies 2 2 2 2 2 2 2 2 Working Pressure (psi) (Mpa) 15 15 15 15 15 15 15 15 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Min. Bend Radius (inches) (mm) 8.00 10.00 13.00 15.00 20.00 25.00 30.00 40.00 203.20 254.00 330.20 381.00 508.00 635.00 762.00 1016.00 Weight (lb/ft) (Kg/m) 1.00 1.10 1.30 1.50 2.70 3.30 3.80 6.00 1.49 1.64 1.93 2.23 4.02 4.91 5.66 8.93
Product Number 11454468502v 11454469502v 11454470502v 11454471502v 11454472502v 11454473502v 11454474502v 11454476502v
Nominal I.D. (inches) (mm) 1-1/2 2 2-1/2 3 4 5 6 8 38.10 50.80 63.50 76.20 101.60 127.00 152.40 203.20
Nominal O.D. (inches) (mm) 2.00 2.50 3.06 3.63 4.63 5.69 6.69 8.75 50.80 63.50 77.79 92.08 117.48 144.46 169.86 222.25
Resistance:
Branding: Thermoid HBD Industries Type 120 Food Handling Hose Made In USA
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Gray Limited 1/8" thick amber colored NR-FDA 1/16" thick gray SBR rubber Two plies of cord fabric -40F to +160F -40C to +71C 50 ft. lengths maximum, for flour use 25 ft. maximum Hand built $250.00 minimum order per size
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a (lb/ft) 2.50 3.00 Weight (Kg/m) 3.72 4.46
Plies 2 2
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
MATERIAL HANDLING
DREDGING SLEEVES
The recommended use for Dredging Sleeves is for the flexible connection between pipes used in dredging service. This hose features a high strength polyester reinforcement that gives this hose a high working pressure (125 psi) with less plies. The SBR/NR tube and cover compound is highly abrasion resistant. The SBR/EPDM cover is also weather resistant.
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Product Number 11444520502v 11444524502v 11444525502v 11444527502v 11444528502v 11444529502v 11444535502v 11444537502v 11444539502v 11444540502v Nominal I.D. (inches) (mm) 4-1/2 6-5/8 8-5/8 10-3/4 12-3/4 14 16 18 20 24 114.30 168.28 219.08 273.05 323.85 355.60 406.40 457.20 508.00 609.60 Nominal O.D. (inches) (mm) 5.88 8.00 10.19 12.31 14.50 15.88 17.75 20.00 22.25 27.50 149.23 203.20 258.76 312.74 368.30 403.23 450.85 508.00 565.15 698.50 Plies 4 4 6 6 8 8 10 12 14 18
Resistance:
Branding: Thermoid HBD Industries Dredge Sleeves Made In USA Black Limited SBR/NR - 3/8" thick SBR/EPDM - 3/32" thick High strength polyester cord -40F to +160F -40C to +71C 50 ft. lengths maximum Hand built $250.00 minimum order per size
Working Pressure (psi) (Mpa) 125 125 125 125 125 125 125 125 125 125 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 Min. Bend Radius (inches) (mm) 45.00 66.25 86.25 107.50 127.50 140.00 160.00 180.00 200.00 240.00 1143.00 1682.75 2190.75 2730.50 3238.50 3556.00 4064.00 4572.00 5080.00 6096.00 Weight (lb/ft) (Kg/m) 5.70 8.20 11.60 14.60 18.60 22.32 24.40 37.10 49.70 72.40 8.48 12.20 17.26 21.73 27.68 30.36 36.31 55.21 73.97 107.75
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Blue Medium PVC PVC Helical wire 0F to +150F -18C to +66C Coils, 100 ft. maximum, 1-1/2" to 4" I.D.
150 Degrees F Weight (lb/ft) (Kg/m) 0.24 0.37 0.63 0.74 1.00 0.36 0.55 0.94 1.10 1.49
70 Degrees F Product Number 19031501002v 19032001002v 19032501002v 19033001002v 19034001002v Nominal I.D. (inches) (mm) 1-1/2 38.10 2 50.80 2-1/2 63.50 3 76.20 4 101.60 Nominal O.D. (inches) (mm) 1.33 2.30 2.83 3.37 4.44 33.78 58.42 71.88 85.60 112.78 Plies n/a n/a n/a n/a n/a
Working Pressure Working Pressure Min.Bend Radius (psi) (Mpa) (psi) (Mpa) (inches) (mm) 30 25 25 20 15 0.21 0.17 0.17 0.14 0.10 5 5 5 5 5 0.03 0.03 0.03 0.03 0.03 4.00 5.00 6.00 7.00 10.00 101.60 127.00 152.40 177.80 254.00
61
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
MATERIAL HANDLING
62
SAND SUCTION
Sand Suction hose provides a flexible member on the suction side of a dredge for ease of movement of the dredge ladder. This hose also handles applications of severe suction service, sand, gravel and other abrasive materials. This hose features a wide variety of sizes available with two tube thicknesses (3/8" and 1/2"), all of which have excellent weathering abrasion resistance. This hose has been designed to hold a vacuum rating of 30 inches of mercury for every size.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Ends:
Black Limited NR - 3/8" or 1/2" thick SBR/EPDM Single steel helix spiralled between multiple plies of high tensile square woven polyester -40F to +160F -40C to +71C 50 ft. lengths maximum Hand built $250.00 minimum order per size Built-in nipples, straight or enlarged
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
MATERIAL HANDLING
Resistance:
Branding: Thermoid HBD Industries Sand and Cement Discharge Made In USA
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Limited SBR - 1/4" or 1/2" thick SBR/EPDM Wrapped construction with 4 to 10 plies of medium weight duck fabric -40F to +160F -40C to +71C 50 ft. lengths maximum Hand built $250.00 minimum order per size
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft)) (Kg/m) 3.80 4.40 5.60 10.20 11.90 16.30 23.90 28.00 5.66 6.55 8.33 15.18 17.71 24.26 35.57 41.67
Product Number 11450025502v 11450030502v 11450040502v 11450050502v 11450060502v 11450080502v 11450100502v 11450120502v
Nominal I.D. (inches) (mm) 2-1/2 3 4 5 6 8 10 12 63.50 76.20 101.60 127.00 152.40 203.20 254.00 304.80
Nominal O.D. (inches) (mm) 3.69 4.19 5.19 6.81 7.81 9.88 12.13 14.25 93.66 106.36 131.76 173.04 198.44 250.83 307.98 361.95
Plies 4 4 4 5 5 6 8 10
Working Pressure (psi) (Mpa) 100 100 75 75 75 60 60 60 0.69 0.69 0.52 0.52 0.52 0.41 0.41 0.41
Resistance:
Branding: Thermoid HBD Industries Hot Air Blower Made In USA. -20F to +350F Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Brown Limited
EPDM EPDM Spiral steel wire helix(es) between synthetic textile plies Temperature Range: -30F to +350F -34 C to +177C Packaging: 100 ft. maximum
Product Number 17717025002v 17717030002 17717040002 Nominal I.D. (inches) (mm) 2-1/2 3 4 63.50 76.20 101.60 Nominal O.D. (inches) (mm) 3.06 3.56 4.63 77.79 90.49 117.48 Plies 2 2 2 Working Pressure (psi) (Mpa) 150 150 150 1.03 1.03 1.03 Min. Bend Radius (inches) (mm) 12.50 15.00 18.00 317.50 381.00 457.20 Weight (lb/ft) (Kg/m) 1.70 2.00 2.80 2.53 2.98 4.17
63
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
MATERIAL HANDLING
64
Resistance:
Branding: Thermoid HBD Industries Material Discharge FDA White Natural Rubber Tube WP Made In USA Blue Limited NR, FDA white, nominal 3/16 "thick SBR Multiple plies of synthetic cord and static wire -40F to +160F -40C to +71C 100 ft. maximum
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a Weight (lb/ft)) (Kg/m) 1.20 1.70 2.40 1.79 2.53 3.57
Working Pressure (psi) (Mpa) 150 150 100 1.03 1.03 0.69
Resistance:
Branding: Thermoid HBD Industries Material Suction FDA White Natural Rubber Tube WP Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Blue Limited NR, FDA white, nominal 3/16" thick SBR, corrugated Synthetic steel wire helix(es) between synthetic textile plies -40F to +160F -40C to +71C 100 ft. maximum
Min. Bend Radius (inches) (mm) 5.00 7.00 8.00 9.00 12.00 127.00 177.80 203.20 228.60 304.80 Weight (lb/ft)) (Kg/m) 1.30 1.60 2.30 2.70 4.00 1.93 2.38 3.42 4.02 5.95
Nominal I.D. (inches) (mm) 1-1/2 2 2-1/2 3 4 38.10 50.80 63.50 76.20 101.60
Nominal O.D. (inches) (mm) 2.22 2.75 3.38 3.88 4.88 56.36 69.85 85.73 98.43 123.83
Plies 2 2 2 2 2
Working Pressure (psi) (Mpa) 150 150 150 150 100 1.03 1.03 1.03 1.03 0.69
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
MATERIAL HANDLING
Resistance:
Branding: Thermoid/HBD Industries, Inc. Transporter Oilfield Vacuum Service 150 PSI WP Not for Refined Fuels Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Black Medium
NBR/SBR, RMA IP-2, Class B SBR/EPDM, corrugated Multiple synthetic textile cords with dual wire helix(es) Temperature Range: -30F to +180F -34C to +82C Packaging: 100 ft. maximum
Plies 2 2 2 2 2 Working Pressure (psi) (Mpa) 150 150 150 150 150 1.03 1.03 1.03 1.03 1.03 Min. Bend Radius (inches) (mm) 1.50 2.00 2.50 3.00 4.00 38.10 50.80 63.50 76.20 101.60 Weight (lb/ft) (Kg/m) 0.70 0.90 1.20 1.40 2.30 1.04 1.34 1.79 2.08 3.42
Nominal I.D. (inches) (mm) 1-1/2 2 2-1/2 3 4 38.10 50.80 63.50 76.20 101.60
Nominal O.D. (inches) (mm) 1.94 2.44 2.97 3.47 4.55 49.21 61.91 75.41 88.11 115.49
Resistance:
Branding: Thermoid HBD Industries Plaster and Concrete XXX PSI Made In USA
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Limited SBR/NR SBR/EPDM Multiple plies of high strength polyester -40F to +160F -40C to +71C 100 ft. maximum
Min. Bend Radius (inches) (mm) 11.00 13.50 18.00 20.00 279.40 342.90 457.20 508.00 Weight (lb/ft) (Kg/m) 0.90 1.30 1.70 2.50 1.34 1.93 2.53 3.72
Nominal I.D. (inches) (mm) 1-1/4 1-1/2 2 2-1/2 31.75 38.10 50.80 63.50
Nominal O.D. (inches) (mm) 1.88 2.28 2.81 3.50 47.63 57.94 71.44 88.90
Plies 4 4 4 6
Working Pressure (psi) (Mpa) 800 800 800 800 5.51 5.51 5.51 5.51
65
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
MATERIAL HANDLING
66
Resistance:
Branding: Thermoid HBD Industries Tube Size Type 120 Dry Cement/Dry Material Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black Limited SBR/NR SBR/EPDM, 1/16" thick Two plies of cord fabric -40F to +160F -40C to +71C 100 ft. maximum
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 1.50 2.00 2.60 2.23 2.98 3.87
Product Number 17774454002 17774456002 17774458002 n/a = Not Applicable Product Number 17774454002 17774456002 17774458002
Nominal O.D. (inches) (mm) 4.44 4.56 4.70 112.71 115.89 119.46
Plies 2 2 2
Resistance:
Branding: Thermoid HBD Industries Type 101 Material Handling Made In USA
Black Limited SBR/NR - 1/16" thick SBR/EPDM - corrugated One wrapped ply of very lightweight fabric. Steel helix(es) wire resists collapse. Extra ply reinforcement at the ends. Standard 3" long straight blank ends. -40F to +160F -40C to +71C 30 ft. lengths maximum Hand built $250.00 minimum order per size
Min. Bend Radius (inches) (mm) 6.00 8.00 9.00 11.00 12.00 15.00 18.00 24.00 30.00 36.00 42.00 48.00 152.40 203.20 228.60 279.40 304.80 381.00 457.20 609.60 762.00 914.40 1066.80 1219.20 Weight (lb/ft) (Kg/m) 0.60 0.70 0.80 1.00 1.10 1.30 1.60 2.30 2.90 3.50 4.30 5.20 0.89 1.04 1.19 1.49 1.64 1.93 2.38 3.42 4.32 5.21 6.40 7.74
Working Pressure (psi) (Mpa) 20 20 20 20 20 15 15 15 10 10 10 10 0.14 0.14 0.14 0.14 0.14 0.10 0.10 0.10 0.07 0.07 0.07 0.07
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
MATERIAL HANDLING
Resistance:
Branding: Thermoid HBD Industries Type 102 Material Handling Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Black Limited
NR - tan. 40 durometer SBR/EPDM - corrugated Wrapped construction with polyester plies and a steel wire helix(es) Temperature Range: -40F to +160F -40C to +71C Packaging: 30 ft. lengths maximum Hand built $250.00 minimum order per size
Product Number 11476003502v 11476004502v 11476005502v 11476006502v 11476007502v 11476010502v 11476012502v Nominal I.D. (inches) (mm) 3 4 5 6 8 10 12 76.20 101.60 127.00 152.40 203.20 254.00 304.80 Nominal O.D. (inches) (mm) 4.50 5.25 6.44 7.50 9.50 11.50 13.50 114.30 133.35 163.51 190.50 241.30 292.10 342.90 Plies 3 3 3 4 4 4 4 Working Pressure (psi) (Mpa) 150 150 150 150 150 150 150 1.03 1.03 1.03 1.03 1.03 1.03 1.03 Min. Bend Radius (inches) (mm) 18.00 24.00 30.00 36.00 48.00 60.00 72.00 457.20 609.60 762.00 914.40 1219.20 1524.00 1828.80 (lb/ft) 5.10 5.50 8.00 11.40 16.00 19.80 24.20 Weight (Kg/m) 7.59 8.19 11.91 16.97 23.81 29.47 36.02
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Limited SBR/NR - 3/64" thick SBR/EPDM - corrugated Wrapped construction with two to four plies with a helical wire -40F to +160F -40C to +71C 50 ft. lengths maximum Hand built $250.00 minimum order per size
Min. Bend Radius (inches) (mm) 12.00 15.00 18.00 21.00 24.00 30.00 36.00 48.00 60.00 72.00 84.00 96.00 304.80 381.00 457.20 533.40 609.60 762.00 914.40 1219.20 1524.00 1828.80 2133.60 2438.40 Weight (lb/ft) (Kg/m) 0.90 1.20 1.40 1.80 2.00 2.80 3.30 4.90 7.00 8.70 10.10 11.50 1.34 1.79 2.08 2.68 2.98 4.17 4.91 7.29 10.42 12.95 15.03 17.11
Product Number 11474020502v 11474025502v 11474030502v 11474035502v 11474040502v 11474050502v 11474060502v 11474080502v 11474100502v 11474120502v 11474140502v 11474160502v
Nominal I.D. (inches) (mm) 2 2-1/2 3 3-1/2 4 5 6 8 10 12 14 16 50.80 63.50 76.20 88.90 101.60 127.00 152.40 203.20 254.00 304.80 355.60 406.40
Nominal O.D. (inches) (mm) 2.50 3.00 3.50 4.00 4.50 5.75 6.75 8.75 10.94 12.94 14.94 16.94 63.50 76.20 88.90 101.60 114.30 146.05 171.45 222.25 277.81 328.61 379.41 430.21
Plies 2 2 2 2 2 3 3 3 4 4 4 4
Working Pressure (psi) (Mpa) 25 25 25 25 25 25 25 25 25 25 25 25 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17
67
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
MATERIAL HANDLING
68
Resistance:
Branding: Thermoid HBD Industries Type 105 Collector Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Black Limited
SBR/NR - 1/8" thick SBR/NR - corrugated Wrapped construction with two to four plies with a helical wire Temperature Range: -40F to +160F -40C to +71C Packaging: 50 ft. lengths maximum Hand built $250.00 minimum order per size
Plies 2 2 2 2 2 3 3 3 4 4 4 4 Working Pressure (psi) (Mpa) 25 25 25 25 25 25 25 25 25 25 25 25 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 Min. Bend Radius (inches) (mm) 12.00 15.00 18.00 21.00 24.00 30.00 36.00 48.00 60.00 72.00 84.00 96.00 304.80 381.00 457.20 533.40 609.60 762.00 914.40 1219.20 1524.00 1828.80 2133.60 2438.40 Weight (lb/ft) (Kg/m) 1.20 1.50 1.80 2.00 2.40 3.30 4.00 5.80 8.10 10.00 11.60 13.20 1.79 2.23 2.68 2.98 3.57 4.91 5.95 8.63 12.05 14.88 17.26 19.65
Product Number 11474660502v 11474661502v 11474662502v 11474657502v 11474664502v 11474665502v 11474666502v 11474668502v 11474670502v 11474672502v 11474674502v 11474676502v
Nominal I.D. (inches) (mm) 2 2-1/2 3 3-1/2 4 5 6 8 10 12 14 16 50.80 63.50 76.20 88.90 101.60 127.00 152.40 203.20 254.00 304.80 355.60 406.40
Nominal O.D. (inches) (mm) 2.75 3.25 3.75 4.25 4.75 5.88 6.88 8.88 11.13 13.13 15.13 17.18 69.85 82.55 95.25 107.95 120.65 149.23 174.63 225.43 282.58 333.38 384.18 434.98
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
MATERIAL HANDLING
Resistance:
Black Limited SBR/NR SBR/EPDM 25 lb. WP and 50 lb. WP - 3/64" 75 lb. through 250 lb. - 1/16" For other thicknesses, contact Salisbury for details Square woven fabric plies with helical wire(s) embedded in a cushion of rubber -40F to +160F -40C to +71C Make to Order (MTO), minimum order $250.00 Contact Salisbury for details 3. Flexlock 4. Flexseal
Type Ends 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 23 2345 2345 2345 2345 2345 2345 2345 2345 2345 2345 345 345
1/4" Tube
Nominal I.D. (inches) (mm) 1 1-1/2 2 2-3/8 2-1/2 2-7/8 3 3-1/2 4 4-1/2 5 6 6-5/8 8 8-5/8 10 10-3/4 12 12-3/4 14 16 25.40 38.10 50.80 60.33 63.50 73.03 76.20 88.90 101.60 114.30 127.00 152.40 168.28 203.20 219.08 254.00 273.05 304.80 323.85 355.60 406.40
2 2-1/2 3 4 6 8 10
12 304.80 14" OD 355.60 16" OD 406.40 Fits Over Pipe I.D. (inches) (mm)
1/4" Tube
Nominal I.D. (inches) (mm) 1 1-1/2 2 2-3/8 2-1/2 2-7/8 3 3-1/2 4 4-1/2 5 6 6-5/8 8 8-5/8 10 10-3/4 12 12-3/4 14 16 25.40 38.10 50.80 60.33 63.50 73.03 76.20 88.90 101.60 114.30 127.00 152.40 168.28 203.20 219.08 254.00 273.05 304.80 323.85 355.60 406.40
Nominal O.D. (inches) (mm) 1.94 2.44 3.00 3.38 3.50 3.88 4.06 4.56 5.06 5.56 6.25 7.31 8.13 9.44 10.06 11.50 12.31 13.63 14.38 15.81 17.81 49.21 61.91 76.20 85.73 88.90 98.43 103.19 115.89 128.59 141.29 158.75 185.74 206.38 239.71 255.59 292.10 312.74 346.08 365.13 401.64 452.44
Type Ends 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 23 2345 2345 2345 2345 2345 2345 2345 2345 2345 2345 345 345
Working Pressure (psi) (Mpa) 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35
Weight (lb/ft) (Kg/m) 1.20 1.70 2.50 2.80 3.00 3.50 3.70 4.00 4.90 5.50 6.30 8.10 8.90 11.20 13.10 15.70 17.00 19.20 19.80 25.10 31.90 1.79 2.53 3.72 4.17 4.46 5.21 5.51 5.95 7.29 8.18 9.37 12.05 13.24 16.66 19.49 23.36 25.29 28.57 29.46 37.35 47.46
2 2-1/2 3 4 6 8 10
69
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
MATERIAL HANDLING
70
2 2-1/2 3 4 6 8 10
12 304.80 14" OD 355.60 16" OD 406.40 Fits Over Pipe I.D. (inches) (mm)
Nominal I.D. (inches) (mm) 1 1-1/2 2 2-3/8 2-1/2 2-7/8 3 3-1/2 4 4-1/2 5 6 6-5/8 8 8-5/8 10 10-3/4 12 12-3/4 14 16 25.40 38.10 50.80 60.33 63.50 73.03 76.20 88.90 101.60 114.30 127.00 152.40 168.28 203.20 219.08 254.00 273.05 304.80 323.85 355.60 406.40
Nominal O.D. (inches) (mm) 1.94 2.44 3.06 3.44 3.56 3.94 4.19 4.69 5.19 5.69 6.31 7.38 8.13 9.56 10.19 11.69 12.44 13.88 14.63 16.13 18.31 49.21 61.91 77.79 87.31 90.49 100.01 106.36 119.06 131.76 144.46 160.34 187.33 206.38 242.89 258.76 296.86 315.91 352.43 371.48 409.58 465.14
Type Ends 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2345 2345 2345 2345 2345 2345 2345 2345 2345 23 5 5 5
Working Pressure (psi) (Mpa) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69
Weight (lb/ft) (Kg/m) 1.20 1.60 2.70 2.80 3.10 3.30 3.70 4.10 5.20 5.80 6.40 8.70 9.50 12.50 13.90 17.50 18.70 25.30 25.80 31.10 42.50 1.79 2.38 4.02 4.17 4.61 4.91 5.51 6.10 7.74 8.63 9.52 12.94 14.13 18.60 20.68 26.04 27.82 37.64 38.39 46.27 63.24
2-1/2 3 4 6 8 10
12 304.80 14" OD 355.60 16" OD 406.40 Fits Over Pipe I.D. (inches) (mm)
1/4" Tube
Nominal I.D. (inches) (mm) 1-1/2 2 2-3/8 2-1/2 2-7/8 3 3-1/2 4 4-1/2 5 6 6-5/8 8 8-5/8 10 10-3/4 12 12-3/4 14 38.10 50.80 60.33 63.50 73.03 76.20 88.90 101.60 114.30 127.00 152.40 168.28 203.20 219.08 254.00 273.05 304.80 323.85 355.60
Nominal O.D. (inches) (mm) 2.56 3.06 3.44 3.56 3.94 4.25 4.75 5.31 5.81 6.44 7.56 8.19 9.81 10.44 12.06 12.81 14.31 15.06 16.56 65.09 77.79 87.31 90.49 100.01 107.95 120.65 134.94 147.64 163.51 192.09 207.96 249.24 265.11 306.39 325.44 363.54 382.59 420.69
Type Ends 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 23 23 23 23 23 23 23 23 23
Working Pressure (psi) (Mpa) 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03
Weight (lb/ft) (Kg/m) 2.00 2.60 3.00 3.10 3.50 3.60 4.10 5.80 6.60 7.10 9.50 10.50 14.80 16.30 20.00 22.10 28.90 30.40 36.20 2.98 3.87 4.46 4.61 5.21 5.36 6.10 8.63 9.82 10.56 14.13 15.62 22.02 24.25 29.76 32.88 43.00 45.23 53.86
5 5 5 5 5 5 5 5 5 5 5
1/4" Tube
Nominal I.D. (inches) (mm) 2 2-1/2 3 4 5 50.80 63.50 76.20 101.60 127.00
Type Ends 5 5 5 5 5
Working Pressure (psi) (Mpa) 250 250 250 250 250 1.72 1.72 1.72 1.72 1.72
Weight (lb/ft) (Kg/m) 12.00 21.80 27.20 32.90 39.70 17.85 32.44 40.47 48.95 59.07
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
FLEXLOCK ENDS
(Full Face Flanges)
Flexlock Ends applications are the same as the Flexseal Ends. This Thermoid patented method of joining hose produces a flexible, rubber-to-rubber seal of great strength. Rubber facing eliminates the need for a gasket. It also provides a rubber seal, thus eliminating any metal contact with the contents of the hose. Flexlock Ends are a rubber flange, reinforced with heavy hose fabric and forming a continuation of the hose tube, backed by a solid steel ring with either 150 lb. or 300 lb. drilling. Flanges cannot be rotated to align bolt holes.
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
N/A Varies, depending on polymer used in compound N/A N/A N/A Varies, depending on the polymer used in compound Hand built $250.00 minimum order per size
Nominal I.D. (inches) (mm) 1-1/2" to 10" 38.1 to 254 12 304.80 14 355.60 16 406.40 18 457.20 20 508.00
Working Pressure (psi) (Mpa) 150 125 90 90 75 75 1.03 0.86 0.62 0.62 0.52 0.52
FLEXLOCK CONNECTORS
Flexlock Connectors are stronger than the Flexseal connectors. Flexlock is designed for working pressures from 100 to 150 psi. The natural rubber tube is abrasion and acid resistant. No metal touches the material being carried. Flexlock can be ordered with or without wire reinforcement. Flanged ends are drilled to bolt to companion standard flat-face flanges, providing a tight seal without a gasket. The connector is furnished with a solid steel backup flange, vulcanized to the duck of the rubber flange. Flexlock Connectors are short lengths of hose for joining metal piping thereby putting non-rigid couplings into the lines. Made of thick flexible rubber, they absorb vibrations and prevent the transmission of noise and damaging vibrations through the metal pipes. As a result, pumps, controls, valves and other equipment have longer life.
Non-wire Reinforced Nominal I.D. (inches) (mm) 1-1/2 2 2-1/2 3 4 5 6 8 10 12 38.10 50.80 63.50 76.20 101.60 127.00 152.40 203.20 254.00 304.80 Working Pressure (psi) (Mpa) 150 150 150 100 100 100 100 100 100 100 1.03 1.03 1.03 0.69 0.69 0.69 0.69 0.69 0.69 0.69
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Wire Reinforced
N/A Limited Natural rubber, 3/16" thick SBR N/A -40 to +160F -40C to +71C Hand built $250.00 minimum order per size
Working Pressure (psi) (Mpa) 150 150 150 150 150 150 150 150 150 100 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 0.69
71
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
N/A Varies, depending on polymer used in compound N/A N/A N/A Varies, depending on the polymer used in compound Hand built $250.00 minimum order per size
Nominal I.D. (inches) (mm) 1-1/2" to 10" 38.1 to 254 12 304.80 14 355.60 18 457.20 20 508.00
Working Pressure (psi) (Mpa) 100 70 60 50 50 0.69 0.48 0.41 0.34 0.34
FLEXSEAL CONNECTORS
Flexseal Connectors allow full flow in the pipeline. Designed for working pressures from 50 to 100 psi, depending on the inside diameter of the connector. The natural rubber tube is abrasion and acid resistant. No metal touches the material being carried. Flexseal is available with or without wire reinforcement. The wire-reinforced type has a helix(es) of steel wire buried in the hose to keep it from collapsing under full suction. Used in both suction and discharge services. Non wire-reinforced type only recommended for pinch-valve or discharge service, where material handled cakes in the tube. Split flanges are drilled to bolt companion standard flat-face flanges. They provide a tight seal without a gasket. Since the flanges rotate freely, alignment of the bolts is easy, thus reducing installation time to a minimum. Service involving operating temperatures over 150F should be reviewed with Salisbury. Flexseal Connectors are short lengths of hose for joining metal piping, thereby putting non-rigid couplings into the lines. Made of thick flexible rubber, they absorb vibrations and prevent the transmission of noise and damaging vibrations through the metal pipes. As a result, pumps, controls, valves and other equipment have longer life.
Non-wire Reinforced Nominal I.D. (inches) (mm) 1-1/2 2 2-1/2 3 4 5 6 8 10 12 38.10 50.80 63.50 76.20 101.60 127.00 152.40 203.20 254.00 304.80 Working Pressure (psi) (Mpa) 100 100 100 75 75 70 60 50 50 50 0.69 0.69 0.69 0.52 0.52 0.48 0.41 0.34 0.34 0.34
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
N/A Limited Natural rubber, 3/16" thick SBR N/A -40F to +160F -40C to +71C Hand built $250.00 minimum order per size
Wire Reinforced Working Pressure (psi) (Mpa) 100 100 100 75 75 60 50 50 50 50 0.69 0.69 0.69 0.52 0.52 0.41 0.34 0.34 0.34 0.34
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
BOTTOM LOADING
Bottom Loading hose is engineered specifically for bottom loading, high pressure tank truck service. Construction of this hose has been stabilized to prevent elongation during service. This hose is rated at full vacuum. The black CR cover has excellent resistance to abrasion, weathering and ozone. The NBR tube is resistant to oil. Bottom Loading hose has a reinforcement of tire cord with a dual wire helix that allows this to handle a constant working pressure of 250 psi for both the 3" or 4" I.D.
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black High NBR with an aromatic range up to 55% CR Tire cord with dual wire helix(es) -20F to +200F -29C to +93C 100 ft. maximum. Minimum run of 1200 ft. per size.
Min. Bend Radius (inches) (mm) 12.00 18.00 304.80 457.20 Weight (lb/ft) (Kg/m) 2.30 3.51 3.42 5.22
Plies 4 4
Resistance:
Branding: Thermoid Cobra I.D. Fuel Oil Hose WP 250 PSI Made In USA Month/Year Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Reinforcement Spirals 4 4 4 4
Red High NBR, RMA Class A NBR/PVC, RMA Class A High tensile spiral polyester cord -40F to +212F -40C to +100C Reels
Min. Bend Radius (inches) (mm) 7.00 8.75 9.25 10.50 177.80 222.25 234.95 266.70 Weight (lb/ft) (Kg/m) 0.47 0.59 0.65 0.80 0.70 0.88 0.97 1.19
Working Pressure (psi) (Mpa) 250 250 250 250 1.72 1.72 1.72 1.72
100.00 125.00 150.00 175.00 100.00 125.00 150.00 175.00 100.00 125.00 150.00 175.00 100.00 125.00 150.00 175.00
73
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
74
Resistance:
Branding:
Thermoid HBD Industries Inc. Transporter Fuel Transfer & Discharge Made In USA Warning: Caution Statement
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black High NBR, RMA Class A NBR/PVC, RMA Class B Polyester cord, dual lead stainless steel static wire -20F to +200F -29C to +93C 100 ft. maximum Minimum run of 1200 ft. per size
Min. Bend Radius (inches) (mm) 14.00 24.00 32.00 355.60 609.60 812.80 Weight (lb/ft) (Kg/m) 1.00 1.50 2.40 1.49 2.23 3.57
Nominal O.D. (inches) (mm) 2.50 3.50 4.63 63.50 88.90 117.48
Plies 2 2 2
Working Pressure (psi) (Mpa) 150 150 150 1.03 1.03 1.03
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
Resistance:
Branding: Thermoid Premier Farm Tank, Size, Made in USA with static wire
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black High NBR, RMA Class A NBR/PVC RMA Class A Spiral high tensile polyester cord -20F to +160F -29C to +71C Reels or coupled lengths
Min. Bend Radius (inches) (mm) 4.50 7.00 114.30 177.80 Weight (lb/ft) (Kg/m) 0.29 0.45 0.43 0.67
Reinforcement Spirals 2 2
75
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
76
PUMPFLEX I Softwall
Pumpflex I is designed for curb pump self-service stations and highly sensitive electronic fuel pumps. Pumpflex I is the longest lasting automotive refueling hose in use at service stations today. The durable construction of this hose resists deterioration from fuel in the tube. The cover stands up to the ravages of ozone and sunlight. Many hoses fail from cracking behind the nozzle end coupling within two to three years, but Pumpflex I will last longer under normal circumstances. Thermoid continues to use industry standard permanent chrome-plated brass couplings, while others do not. When you need a hose, use the best: Pumpflex I. Note: Do not use reusable couplings with this product.
Resistance:
G K D
Branding: Thermoid Size Pumpflex I Gasoline Hose UL Listed 97MO Made In USA Month/Year
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature range: Packaging:
Black High, Medium-High NBR/PVC, RMA Class A Thermalon, U/L approved, Class B Spiral polyester cord with static wire (Softwall) -40F to +180F -40C to +82C Reels, coupled lengths Colored covers; contact customer service for minimum run requirements
Reels (Thermocure)
Product Number 22462401662v 22462481662 22464641662 Nominal I.D. (inches) (mm) 5/8 3/4 1 15.88 19.05 25.40 Nominal O.D. (inches) (mm) 1.03 1.13 1.50 26.19 28.58 38.10 Reinforcement Spirals 2 2 2 Working Pressure (psi) (Mpa) 200 200 150 1.38 1.38 1.03 Min. Bend Radius (inches) (mm) 3.75 4.50 7.00 95.25 114.30 177.80 Weight (lb/ft) (Kg/m) 0.27 0.32 0.62 0.40 0.48 0.92
Nominal I.D. (inches) (mm) 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1 1 1 1 1 1 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 25.40 25.40 25.40 25.40 25.40 25.40 25.40 25.40 25.40 25.40 25.40
Lengths (feet) (meters) 8.50 9.00 9.50 10.00 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 20.00 8.50 9.00 9.50 10.00 10.50 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 10.00 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 2.59 2.74 2.90 3.05 3.35 3.66 3.96 4.27 4.57 4.88 5.18 5.49 6.10 2.59 2.74 2.90 3.05 3.20 3.35 3.66 3.96 4.27 4.57 4.88 5.18 5.49 5.79 6.10 3.05 3.35 3.66 3.96 4.27 4.57 4.88 5.18 5.49 5.79 6.10
Weight per Length (lbs) (Kgs) 3.67 3.88 4.09 4.29 4.70 4.85 5.10 5.45 5.80 6.25 6.59 6.98 7.75 4.08 4.19 4.31 4.42 4.65 4.85 5.01 5.33 5.62 5.96 6.33 6.54 6.90 7.30 7.45 6.20 6.82 7.44 8.06 8.68 9.30 9.92 10.54 11.16 11.78 12.40 1.66 1.76 1.85 1.95 2.13 2.20 2.31 2.47 2.63 2.83 2.99 3.17 3.51 1.85 1.90 1.95 2.00 2.11 2.20 2.27 2.42 2.55 2.70 2.87 2.97 3.13 3.31 3.38 2.81 3.09 3.37 3.66 3.94 4.22 4.50 4.78 5.06 5.34 5.62
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
PUMPFLEX II Hardwall
Pumpflex II is designed for curb pump self-service stations and highly sensitive electronic fuel pumps. Pumpflex II is the longest lasting automotive refueling hose in use at service stations today. The durable construction of this hose resists deterioration from fuel in the tube. The cover stands up to the ravages of ozone and sunlight. Many hoses fail from cracking behind the nozzle end coupling within two to three years, but Pumpflex II will last longer under normal circumstances. Thermoid continues to use industry standard permanent chrome-plated brass couplings, while others do not. When you need a hose, use the best: Pumpflex II. Note: Do not use reusable couplings with this product.
Resistance:
G K D
Branding: Thermoid Size Pumpflex II Gasoline Hose UL Listed 97MO Made In USA Month/Year Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black High, Medium-High NBR/PVC, RMA Class A Thermalon, U/L approved, Class B 1 wire braid (Hardwall) -40F to +180F -40C to +82C Reels, Coupled Lengths Colored covers; contact customer service for minimum run requirements
Reels (Thermocure)
Product Number 22341401662 22341481662 22341641662 Nominal I.D. (inches) (mm) 5/8 3/4 1 15.88 19.05 25.40 Nominal O.D. (inches) (mm) 1.03 1.13 1.50 26.19 28.58 38.10 Reinforcement Spirals 2 2 2 Working Pressure (psi) (Mpa) 200 200 150 1.38 1.38 1.03 Min. Bend Radius (inches) (mm) 3.75 4.50 7.00 95.25 114.30 177.80 Weight (lb/ft) (Kg/m) 0.40 0.44 0.69 0.60 0.65 1.03
Nominal I.D. (inches) (mm) 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1 1 1 1 1 1 1 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 19.05 25.40 25.40 25.40 25.40 25.40 25.40 25.40 25.40 25.40 25.40 25.40 25.40
Lengths (feet) (meters) 1.00 8.50 9.00 9.50 10.00 10.50 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 1.00 8.50 9.00 9.50 10.00 10.50 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 20.00 10.00 10.50 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 0.30 2.59 2.74 2.90 3.05 3.20 3.35 3.66 3.96 4.27 4.57 4.88 5.18 5.49 5.79 6.10 0.30 2.59 2.74 2.90 3.05 3.20 3.35 3.66 3.96 4.27 4.57 4.88 5.18 5.49 6.10 3.05 3.20 3.35 3.66 3.96 4.27 4.57 4.88 5.18 5.49 5.79 6.10
Weight per Length (lbs) (Kgs) 1.78 4.47 4.59 4.71 4.83 5.07 5.32 5.54 5.88 6.23 6.68 7.12 7.25 7.68 8.11 8.55 2.03 5.01 5.14 5.27 5.40 5.65 5.95 6.21 6.60 7.02 7.40 7.91 8.20 8.70 9.67 6.34 6.65 6.98 7.61 8.25 8.65 9.16 9.78 10.23 10.83 11.40 11.80 0.81 2.03 2.08 2.14 2.19 2.30 2.41 2.51 2.67 2.83 3.03 3.23 3.29 3.48 3.68 3.88 0.92 2.27 2.33 2.39 2.45 2.56 2.70 2.82 2.99 3.18 3.36 3.59 3.72 3.95 4.39 2.88 3.02 3.17 3.45 3.74 3.92 4.15 4.44 4.64 4.91 5.17 5.35
77
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
78
PUMPFLEX II Jumper
Pumpflex II - Jumper hose primary application is the dual low hose dispenser converted to Stage II vapor recovery external liquid line connection. This hose is used in conjunction with the Pumpflex II hose. Note: Do not use reusable couplings with this product.
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black High, Medium-High
Resistance:
G K D
Branding: Thermoid Size Pumpflex II Gasoline Hose UL Listed 97MO Made In USA Month/Year
NBR/PVC, RMA Class A Thermalon, U/L approved, RMA Class B 1 wire braid (Hardwall) -40F to +180F -40C to +82C Bulk
Nominal I.D. (inches) (mm) 3/4 3/4 3/4 3/4 3/4 19.05 19.05 19.05 19.05 19.05
Lengths (inches) (mm) 14.00 16.00 18.00 21.00 24.00 355.60 406.40 457.20 533.40 609.60
Weight per Length (lbs) (Kgs) 1.42 1.47 1.56 1.63 1.72 0.64 0.67 0.71 0.74 0.78
Resistance:
G
Branding: Thermoid Size Pumpflex Marina Hose UL Listed 97MO Made In USA Month/Year Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Green High, Medium-High NBR/PVC, RMA Class A CM, RMA Class B Spiral polyester yarn -40F to +180F -40C to +82C Reels
Min. Bend Radius (inches) (mm) 3.75 4.50 7.00 95.25 114.30 177.80 Weight (lb/ft) (Kg/m) 0.27 0.32 0.62 0.40 0.48 0.92
Nominal O.D. (inches) (mm) 1.03 1.13 1.50 26.19 28.58 38.10
Reinforcement Spirals 4 4 4
Working Pressure (psi) (Mpa) 200 200 150 1.38 1.38 1.03
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
Resistance:
G
Cover Color: Oil Resistance: Construction: Tube: Outer Vapor Hose: Cover: Reinforcement: Temperature Range: Packaging: Retractor Clamp:
Black High, Medium-High NBR/PVC Special lightweight corrugated synthetic polymer material NBR/PVC Braided steel wire -40F to +180F -40C to +82C Individual carton, 6 per master carton Use product number 22972150011. Max. tension is 12 lbs. Resistance:
G
SUPERLITE V (Venturi)
Superlite V (Venturi) has been designed inside and out for performance, improved fuel delivery/ vapor and liquid recovery; a superior design. Its co-axial system consists of a premium outer hose, a venturi device recovers fluid that collects in the vapor passage, and an extremely flexible inner fuel delivery hose. Superlite V is lightweight, easy to handle, user friendly, is UL Listed and CARB approved and delivers up to 10 gpm, the CARB minimum. Coupling: Machined brass built-in swivel nut
Cover Color: Oil Resistance: Construction: Tube: Outer Vapor Hose: Cover: Reinforcement: Temperature Range: Packaging: Retractor Clamp:
Black High, Medium-High NBR/PVC Special lightweight corrugated synthetic polymer material NBR/PVC Braided steel wire -40F to +180F -40C to +82C Individual carton, 6 per master carton Use product number 22972150011. Max. tension is 12 lbs.
Min. Bend Radius (inches) (mm) 4.00 4.00 101.60 101.60 Weight (lb/ft) (Kg/m) 0.23 0.12 0.34 0.18
Superlite Hi-Flo Product Number w/o Venturi 22314444461v 22314444551v 22314444401v 22314444411v 22314444561v 22314444491v 22314444061v 22314444451v 22314444071v 22314444391v 22314444081 22314444091 22314444101 22314444111 22314444121 22314444131 22314444141 22314444151 22314444161 22314444171
v = Make To Order (MTO)
Length (feet) 2.00 3.00 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 (meters) 0.61 0.91 1.22 1.37 1.52 1.68 1.83 1.98 2.13 2.29 2.44 2.59 2.74 2.90 3.05 3.20 3.35 3.51 3.66 3.81
Superlite Hi-Flo Product Number w/ Venturi 22313333241v 22313333231v 22313333021v 22313333031v 22313333041v 22313333051v 22313333061v 22313333071 22313333081 22313333091 22313333101 22313333111 22313333121 22313333131 22313333141v 22313333151v 22313333161v 22313333171v
v = Make To Order (MTO)
Length (feet) 2.00 3.00 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 (meters) 1.22 1.37 1.52 1.68 1.83 1.98 2.13 2.29 2.44 2.59 2.74 2.90 3.05 3.20 3.35 3.51 3.66 3.81
79
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
80
Resistance:
G
Cover Color: Oil Resistance: Construction: Tube: Outer Vapor Hose: Cover: Reinforcement: Temperature Range: Packaging: Coupling:
Black High, Medium-High NBR/PVC Special lightweight helical synthetic polymer material NBR/PVC Braided steel wire -40F to +180F -40C to +82C Individual carton, 10 per master carton Machined brass built-in swivel nut
Resistance:
G
Cover Color: Oil Resistance: Construction: Tube: Outer Vapor Hose: Cover: Reinforcement: Temperature Range: Packaging: Retractor Clamp:
Black High, Medium-High NBR/PVC, RMA Class A Special lightweight helical synthetic polymer material NBR/PVC, RMA Class A Braided steel wire -40F to +180F -40C to +82C Individual carton, 6 per master carton Use product number 22972150021. Max. tension is 12 lbs.
Min. Bend Radius (inches) (mm) 4.00 4.00 101.60 101.60 Weight (lb/ft) (Kg/m) 0.23 0.12 0.34 0.18
Superlite Q Co-Ax Product Number w/o Venturi 22985555041v 22985555051v 22985555061v 22985555071v 22985555081v 22985555091 22985555101 22985555111 22985555121 22985555131 22985555141 22985555151 22985555161 22985555171
v = Make To Order (MTO)
Length (feet) 4.00 5.00 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 (meters) 1.22 1.52 2.13 2.29 2.44 2.59 2.74 2.90 3.05 3.20 3.35 3.51 3.66 3.81
Superlite QV Product Number w/ Venturi 22986666041v 22986666051v 22986666061v 22986666071 22986666081 22986666091 22986666101 22986666111 22986666121 22986666131 22986666141v 22986666151v 22986666161v 22986666171v
v = Make To Order (MTO)
Length (feet) 4.00 5.00 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 (meters) 1.22 1.52 2.13 2.29 2.44 2.59 2.74 2.90 3.05 3.20 3.35 3.51 3.66 3.81
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
SUPERLITE Q WHIP
Superlite Q Whip hoses primary application is the breakaway connection from the pump to the primary hose assembly. This hose is used in conjunction with Superlite assembly. Note: Do not use reusable couplings with this product. Coupling: Machined brass built-in swivel nut Aluminum ferrule with machined internal grooves viton O-ring.
Resistance:
G
Cover Color: Oil Resistance: Construction: Tube: Outer Vapor Hose: Cover: Reinforcement: Temperature Range: Packaging:
Black High, Medium-High NBR/PVC, RMA Class A Special lightweight helical synthetic polymer material NBR/PVC, RMA Class A Braided steel wire -40F to +180F -40C to +82C Depends on the order
81
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
82
HI-VAC CO-AX
Hi-Vac Co-Ax hose is designed for the new vacuum assist systems using a bootless nozzle. Hi-Vacs inverted design pulls the vapor through the inner hose while fuel is dispensed in the outer hose. Its construction is uncomplicated, well-balanced and exceptionally easy to handle. Hi-Vac is UL Listed, CARB certified and delivers up to 12 gpm. Coupling: Chrome plated brass metric thread (M34) Retractor Clamp: Use product number 22973101611. Max. tension is 10 lbs.
Resistance:
G
Cover Color: Black Oil Resistance: High, Medium-High Construction: Inner Hose Tube: NBR/PVC Outer Hose Tube: NBR/PVC, RMA Class A Inner Hose Cover: NBR/PVC Outer Hose Cover: CSM, RMA Class B Reinforcement: Braided steel wire Temperature Range: -40F to +180F -40C to +82C Packaging: Depends on the order quantity Resistance:
G
HI-VAC-S CO-AX
The Hi-Vac-S Co-Ax is a premium, advanced design hose for vacuum-assist Stage II systems using a bootless nozzle. This hose was developed for high volume, intensely competitive markets. Its lightweight and easy handling properties are designed in without sacrificing performance, strength or long service life. Hi-Vac-S is UL Listed, CARB certified and delivers up to 11 gpm. Coupling: Chrome plated brass metric thread (M34) Retractor Clamp: Use product number 22973101611. Max. tension is 10 lbs.
Cover Color: Black Oil Resistance: High, Medium-High Construction: Inner Hose Tube: NBR/PVC Outer Hose Tube: NBR/PVC, RMA Class A Inner Hose Cover: NBR/PVC Outer Hose Cover: CSM, RMA Class B Reinforcement: Braided steel wire Temperature Range: -40F to +180F -40C to +82C Packaging: Individual carton, 6 per master carton
Steel Braid Reinforcement 1 1 1 1 Working Pressure (psi) (Mpa) Min. Bend Radius (inches) (mm) Weight (lb/ft) (Kg/m)
Nominal I.D. (inches) (mm) 7/8" I.D. Hi-Vac Inner Hose Outer Hose 3/4" I.D. Hi-Vac-S Inner Hose Outer Hose Hi-Vac 7/8" Product Number 22473222041v 22473222061v 22473222091v 22473222251v 22473222221v 22473222231v 22473222071 22473222081 22473222091 22473222101 22473222111v 22473222121v 22473222131v 22473222141v 22473222151 22473222161v 22473222171v 22473222181v 22473222191v
v = Make To Order (MTO)
Nominal O.D. (inches) (mm) 0.52 1.25 0.52 1.13 Length 13.08 31.75 13.08 28.58
250 250
1.72 1.72
4.00 4.00
101.60 101.60
0.12 0.23
0.18 0.34
(feet) 4.00 5.00 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00
(meters) 1.22 1.52 1.83 1.98 2.13 2.29 2.44 2.59 2.74 2.90 3.05 3.20 3.35 3.51 3.66 3.81 3.96 4.11 4.27
Hi-Vac-S 3/4" Product Number 22471111041v 22471111061v 22471111291v 22471111251v 22471111221v 22471111231 22471111071 22471111081 22471111091 22471111101 22471111111v 22471111121v 22471111131v 22471111141v 22471111151v 22471111161v 22471111171v 22471111181v 22471111191v
v = Make To Order (MTO)
Length (feet) 4.00 5.00 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 (meters) 1.22 1.52 1.83 1.98 2.13 2.29 2.44 2.59 2.74 2.90 3.05 3.20 3.35 3.51 3.66 3.81 3.96 4.11 4.27
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
HI-VAC WHIP
Hi-Vac Whip hoses primary application is the breakaway connection from the pump to the primary hose assembly. This hose is used in conjunction with the Hi-Vac Co-Ax hose assembly. Note: Do not use reusable couplings with this product. Coupling: Chrome plated brass metric thread (M34)
Resistance:
G
Cover Color: Black Construction: Inner Hose Tube: NBR/PVC Outer Hose Tube: NBR/PVC, RMA Class A Inner Hose Cover: NBR/PVC Outer Hose Cover: CSM, RMA Class B Reinforcement: Braided steel wire Temperature Range: -40F to +180F -40C to +82C Packaging: Depends on the order quantity
Length (inches) 10 12 10 12 (mm) 254.00 304.80 254.00 304.80
Nominal I.D. (inches) (mm) 3/4 3/4 7/8 7/8 19.05 19.05 22.23 22.23
Resistance:
Branding: Thermoid HBD Industries Inc. Ebonite 150 PSI WP Made In USA
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black High NBR, RMA Class A NBR/PVC corrugated, RMA Class B 2 plies of polyester cord with a dual wire helix(es) between plies -30F to +200F -34C to +93C 100 ft. maximum
Min. Bend Radius (inches) (mm) 2.00 2.50 3.00 4.50 6.00 8.00 50.80 63.50 76.20 114.30 152.40 203.20 Weight (lb/ft) (Kg/m) 0.60 0.70 0.90 1.20 1.80 2.70 0.89 1.04 1.34 1.79 2.68 4.02
Nominal I.D. (inches) (mm) 1 1-1/4 1-1/2 2 3 4 25.40 31.75 38.10 50.80 76.20 101.60
Nominal O.D. (inches) (mm) 1.53 1.78 2.06 2.56 3.56 4.66 38.89 45.24 52.39 65.09 90.49 118.27
Plies 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 150 150 150 150 150 150 1.03 1.03 1.03 1.03 1.03 1.03
83
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
84
Resistance:
G K
Branding: Thermoid HBD Industries Inc. Ebonite LT 150 PSI WP Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Black Medium-High
NBR (low temperature) NBR/PVC corrugated 2 plies of polyester cord with a dual wire helix(es) between plies Temperature Range: -65F to +180F -54C to +82C Packaging: 100 ft. maximum
Plies 2 2 2 2 Working Pressure (psi) (Mpa) 150 150 150 150 1.03 1.03 1.03 1.03 Min. Bend Radius (inches) (mm) 3.00 4.00 5.50 8.00 76.20 101.60 139.70 203.20 Weight (lb/ft) (Kg/m) 0.90 1.20 1.80 2.70 1.34 1.79 2.68 4.02
Nominal O.D. (inches) (mm) 2.06 2.56 3.56 4.66 52.39 65.09 90.49 118.27
Resistance:
Branding: Thermoid HBD Industries Inc. Transporter LW Tank Truck Made In USA
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black High NBR, RMA Class A NBR/PVC corrugated. Also available in orange 2 plies of polyester cord with a dual wire helix(es) between plies -30F to +200F -34C to +93C 100 ft. maximum
Min. Bend Radius (inches) (mm) 5.00 7.50 9.00 127.00 190.50 228.60 Weight (lb/ft) (Kg/m) 1.00 1.80 2.50 1.49 2.68 3.72
Nominal O.D. (inches) (mm) 2.56 3.69 4.69 65.09 93.66 119.06
Plies 2 2 2
Working Pressure (psi) (Mpa) 100 100 100 0.69 0.69 0.69
* All sizes available in an orange cover, contact Salisbury for details v = Make To Order (MTO)
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
Resistance:
Branding: Thermoid HBD Industries Inc. Transporter Tank Truck Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Red High NBR, RMA Class A NBR/PVC, RMA Class B Spiral steel wire helix(es) between synthetic textile plies -30F to +200F -34C to +93C 100 ft. maximum
Min. Bend Radius (inches) (mm) 4.50 6.00 7.50 9.00 12.00 114.30 152.40 190.50 228.60 304.80 Weight (lb/ft) (Kg/m) 0.80 1.00 1.50 1.70 2.50 1.19 1.49 2.23 2.53 3.72
Nominal I.D. (inches) (mm) 1-1/2 2 2-1/2 3 4 38.10 50.80 63.50 76.20 101.60
Nominal O.D. (inches) (mm) 2.00 2.47 3.06 3.56 4.63 50.80 62.71 77.79 90.49 117.48
Plies 2 2 2 2 2
Working Pressure (psi) (Mpa) 150 150 150 150 150 1.03 1.03 1.03 1.03 1.03
Resistance:
Branding: Thermoid HBD Industries Inc. Transporter Tank Truck Made In USA
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black High NBR, RMA Class A NBR/PVC, RMA Class B Spiral steel wire helix(es) between synthetic textile plies -30F to +200F -34C to +93C 1" - 4" I.D. 100 ft. maximum 6" I.D. 50 ft.; 100 ft. available upon request
Min. Bend Radius (inches) (mm) 2.50 3.00 4.50 6.00 7.50 9.00 12.00 30.00 63.50 76.20 114.30 152.40 190.50 228.60 304.80 762.00 Weight (lb/ft) (Kg/m) 0.50 0.70 0.80 1.00 1.50 1.70 2.50 5.00 0.74 1.04 1.19 1.49 2.23 2.53 3.72 7.44
Product Number 17811008002 17811010002 17811015002 17811020002 17811025002 17811030002 17811040002 17811060002v
Nominal I.D. (inches) (mm) 1 25.40 1-1/4 31.75 1-1/2 38.10 2 50.80 2-1/2 63.50 3 76.20 4 101.60 6 152.40
Nominal O.D. (inches) (mm) 1.50 1.75 2.00 2.47 3.06 3.56 4.63 6.78 38.10 44.45 50.80 62.71 77.79 90.49 117.48 172.24
Plies 2 2 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 200 200 150 150 150 150 150 100 1.38 1.38 1.03 1.03 1.03 1.03 1.03 0.69
85
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
86
Resistance:
Branding: Thermoid HBD Industries Inc. Type 924 Petroleum Transfer WP Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black High NBR, RMA Class A NBR/PVC, RMA Class B Spiral steel wire helix(es) between synthetic textile plies -30F to +200F -34C to +93C 100 ft. maximum
Min. Bend Radius (inches) (mm) 2.50 3.00 4.50 6.00 7.50 9.00 12.00 30.00 63.50 76.20 114.30 152.40 190.50 228.60 304.80 762.00 Weight (lb/ft) (Kg/m) 0.50 0.70 0.80 1.00 1.50 1.70 2.50 5.00 0.74 1.04 1.19 1.49 2.23 2.53 3.72 7.44
Product Number 17812008002 17812010002 17812015002 17812020002 17812025002 17812030002 17812040002 17812060002v
Nominal I.D. (inches) (mm) 1 1-1/4 1-1/2 2 2-1/2 3 4 6 25.40 31.75 38.10 50.80 63.50 76.20 101.60 152.40
Nominal O.D. (inches) (mm) 1.50 1.75 2.00 2.47 3.06 3.56 4.63 6.75 38.10 44.45 50.80 62.71 77.79 90.49 117.48 171.45
Plies 2 2 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 200 200 150 150 150 150 150 100 1.38 1.38 1.03 1.03 1.03 1.03 1.03 0.69
TRANSPORTER FLEX-DEVIL
Flex-Devil is a highly flexible, corrugated transfer hose. This hose is made with special rubber compounds, which produce an exceptionally lightweight, flexible hose for use in the transfer of gasoline, petroleum based products and a wide range of oils, and chemicals at temperatures down to -40F (-40C). Flex-Devil stays flexible even in extreme temperatures, provides solid working pressure of 150 psi in a wide variety of ID sizes. This hose is rated at full vacuum (30" Hg). Flex-Devil is compatible with gasoline grades up to 50% aromatic content and MRBE/unleaded blends up to 15% MTBE. Flex-Devil is lightweight, easy to handle and offers excellent resistance to abrasion, weathering and exposure to oil, fuel and chemicals. Flex-Devil also accepts a range of coupling types, including swaged, crimped, internally expanded and/or banded shank couplings. Please consult coupling manufacturer for specific coupling recommendations and attachment procedures.
Product Number 17814532002 17814534002 17814536002 Nominal I.D. (inches) (mm) 2 3 4 50.80 76.20 101.60 Nominal O.D. (inches) (mm) 2.43 3.47 4.54 61.70 88.70 115.30
Resistance:
D G
Branding: Thermoid/HBD Industries Transporter Flex-Devil 150 PSI WP Made In USA Caution Statement Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Couplings: Red High NBR, RMA Class A (low temperature) CR, RMA Class B (corrugated) Multiple ply synthetic textile cords with dual helix wire -40F to +200F -40C to +93C 100 ft. lengths, straight ends only Swaged, crimped, internally expanded or banded shank types. Contact coupling manufacturer for proper hose assembly-coupling procedures.
Min. Bend Radius (inches) (mm) 4.00 6.00 8.00 101.60 152.40 203.40 Weight (lb/ft) (Kg/m) 0.90 1.56 2.24 1.35 2.32 3.34
Plies 2 2 2
Working Pressure (psi) (Mpa) 150 150 150 1.03 1.03 1.03
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG Petroleum
Resistance:
Branding: Thermoid HBD Industries Inc. Transporter Vapor Recovery Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Black High
NBR, RMA Class A NBR/PVC, RMA Class B Two plies of synthetic cord with a spiral wire helix(es) between plies Temperature Range: -30F to +200F -34C to +93C Packaging: 100 ft. maximum
Product Number 17811130002v 17811140002v Nominal I.D. (inches) (mm) 3 4 76.20 101.60 Nominal O.D. (inches) (mm) 3.44 4.44 87.31 112.71 Plies 2 2 Working Pressure (psi) (Mpa) 100 80 0.69 0.55 Min. Bend Radius (inches) (mm) 9.00 12.00 228.60 304.80 Weight (lb/ft) (Kg/m) 1.30 1.80 1.93 2.68
Resistance:
Branding: Thermoid HBD Industries Inc. Transporter XLW CORR Tank Truck Made In USA
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Red High NBR, RMA Class A CR, RMA Class B, corrugated 2 plies of polyester cord with a dual wire helix(es) between plies -40F to +200F -40C to +93C 100 ft. maximum
Min. Bend Radius (inches) (mm) 4.00 5.00 6.00 9.00 101.60 127.00 152.40 228.60 Weight (lb/ft) (Kg/m) 0.88 1.20 1.40 2.00 1.31 1.79 2.08 2.98
Nominal O.D. (inches) (mm) 2.44 2.94 3.44 4.50 61.91 74.68 87.31 114.30
Plies 2 2 2 2
Working Pressure (psi) (Mpa) 100 100 100 100 0.69 0.69 0.69 0.69
87
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG LP Gas
88
LP GAS/PROPANE TANKMASTER
LP Gas/Propane Tankmaster is specifically designed for the transfer of LP Gas and propane between the docks and tankers. LP Gas/Propane is a high strength hose with a design safety factor of 5:1. This hose meets the NFPA-58 and USCG specifications of 46 CFR 38.15-5 for non-refrigerated transfer of compressed LP Gas and Propane to -20F to +150F temperatures. This hose features a string vented carcass to avoid blistering due to gas permeation. The CR cover resists abrasion, weathering and ozone.
Note: Two black covers offered: 1. CR for Electrically Discontinuous (ED) hose assemblies. 2. NGR/PVC for Electrically Continuous (EC) hose assemblies. Please specify electrical property of hose required when ordering a hose assembly.
Resistance:
Branding: Thermoid HBD Industries Inc. LP Gas/Propane 350 WP Made In USA Date Code Warning Label Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black High, Medium-High Nitrile/Hydrin blend CR (See note in box) Multiple synthetic textile cord plies with helix(es) wire. String vented carcass -20F to +150F -29C to +66C 2" I.D. through 6" I.D. 100 ft. maximum length 8" I.D. or larger, up to 60 ft. long Hand built $250.00 minimum order per size
Min. Bend Radius (inches) (mm) 12.00 18.00 24.00 36.00 54.00 304.80 457.20 609.60 914.40 1371.60 Weight (lb/ft) (Kg/m) 3.10 3.70 6.50 11.70 19.30 4.61 5.51 9.67 17.41 28.72
Nominal O.D. (inches) (mm) 3.03 4.16 5.53 7.63 10.20 76.99 105.57 140.49 193.68 259.16
Plies 4 4 6 6 8
Working Pressure (psi) (Mpa) 350 350 350 350 350 2.41 2.41 2.41 2.41 2.41
*All sizes have 25 inches of mercury vacuum rating v = Make To Order (MTO)
Resistance:
Branding: Thermoid Polar-Flex, CGA Type 1 UL Listed LP Gas Hose Issue No. (Quarter) MH12585 350 PSI Max. WP Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black High, Medium-High NBR, RMA Class A CM, RMA Class B 2 and 4 spiral polyester yarn -50F to +180F -46C to +82C Reels, *Coupled Lengths 1" I.D. can be ordered with coupled (M x M) Pro-Sur brass fittings. The D.O.T. test certificate is included Hose assemblies tested/approved to 7/1/99 D.O.T reg. CGA approval on 1" I.D. assemblies only
Min. Bend Radius (inches) (mm) 1.50 2.25 3.00 4.50 6.00 38.10 57.15 76.20 114.30 152.40 Weight (lb/ft) (Kg/m) 0.13 0.16 0.30 0.43 0.58 0.19 0.24 0.45 0.64 0.86
Nominal I.D. (inches) (mm) 1/4 3/8 1/2 3/4 1 6.35 9.53 12.70 19.05 25.40
Nominal O.D. (inches) (mm) 0.58 0.69 0.94 1.25 1.50 14.68 17.46 23.81 31.75 38.10
Reinforcement Spirals 2 2 4 4 4
Working Pressure (psi) (Mpa) 350 350 350 350 350 2.41 2.41 2.41 2.41 2.41
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
PETROLEUM/LPG LP Gas
TYPE 65 BUTANE-PROPANE
Type 65 Butane-Propane hose is designed for use to transfer LP Gas from bulk storage to tank cars or cylinders. This hose features a black CR cover that is oil resistant and also resists snagging, abrasion and weather. This hose is lightweight and flexible. All sizes have a flexible static wire. Meets all UL requirements. The 1-1/2" size meets CAN/CGA-8.1-M86, Type 1. The high tensile cord reinforcement is designed for a minimum burst of 1750 psi. Note: Do not use reusable couplings with this product. This hose is intentionally pin-pricked for safety reasons. Type 65 Butane-Propane hose must be used in an open, well-ventilated environment. Not recommended for use with natural gas or propylene.
Product Number 17814605* 17814610* 17814615* Nominal I.D. (inches) (mm) 1-1/4 1-1/2 2 31.75 38.10 50.80 Nominal O.D. (inches) (mm) 1.81 2.19 2.75 46.04 55.56 69.85
Resistance:
Branding:
Thermoid HBD Industries Inc. Type 65 UL Listed LPG Hose MH12585 Issue Number 350 PSI Max. WP Quarter/Year Made In USA
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Plies** 4 4 4
Black High, Medium-High CR CR High tensile cord -40F to +180F -40C to +82C 50 ft.
Min. Bend Radius (inches) (mm) 8.00 9.00 12.00 203.20 228.60 304.80 Weight (lb/ft) (Kg/m) 0.92 1.21 1.77 1.37 1.80 2.63
Working Pressure (psi) (Mpa) 350 350 350 2.41 2.41 2.41
* To order 50/100 ft., use product number and 002 = 100 ft. and 502 = 50 ft. ** Includes dual stainless steel static wire, spiral applied, in all sizes.
Resistance:
Branding: Thermoid Type 75 UL Listed Gas Hose Issue Number (Quarter) MH12585 350 PSI Maximum WP Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black High, Medium-High NBR, RMA Class A CM, RMA Class B 2 or 4 spiral polyester yarn -40F to +180F -40C to +82C Reels, *Coupled lengths D.O.T. test certificate included with assemblies. Hose assemblies tested/approved to 7/1/99 D.O.T. regulations.
Reinforcement Spirals 2 4 2 4 4 4 4
Working Pressure (psi) (Mpa) 350 350 350 350 350 350 350 2.41 2.41 2.41 2.41 2.41 2.41 2.41
Min. Bend Radius (inches) (mm) 1.50 1.50 2.25 2.25 3.00 4.50 7.00 38.10 38.10 57.15 57.15 76.20 114.30 177.80
Weight (lb/ft) (Kg/m) 0.12 0.15 0.16 0.20 0.29 0.41 0.58 0.18 0.22 0.24 0.30 0.43 0.61 0.86
89
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
SPECIAL APPLICATIONS
90
Resistance:
Branding: Thermoid HBD Industries Hot Tar& Asphalt 150 WP 350F Max. Temp. Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black Medium CR, suitable to +350F CR Spiral synthetic cord with spiral helix(es) inserted -20F to +350F -29C to +177C 100 ft. maximum Minimum order is 1200 ft. per size
Min. Bend Radius (inches) (mm) 6.00 8.00 10.00 14.00 18.00 152.40 203.20 254.00 355.60 457.20 Weight (lb/ft) (Kg/m) 1.30 1.50 2.30 2.80 4.00 1.93 2.23 3.42 4.17 5.95
Nominal I.D. (inches) (mm) 1-1/2 2 2-1/2 3 4 38.10 50.80 63.50 76.20 101.60
Nominal O.D. (inches) (mm) 2.13 2.63 3.19 3.75 4.75 53.98 66.68 80.96 95.25 120.65
Reinforcement Spirals 2 2 2 2 2
Working Pressure (psi) (Mpa) 150 150 150 150 150 1.03 1.03 1.03 1.03 1.03
ELEPHANT TRUNK
The recommended use for Elephant Trunk hose is for gravity flow transfer of dry bulk materials. This hose features SBR/NR tube and SBR/EPDM cover compound with a two ply nylon cord reinforcement. This combination allows this hose to be lightweight and flexible. Other benefits include resistance to moisture absorption, weathering, aging and sun-checking.
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black Limited
Resistance:
SBR/NR - 1/8" thick SBR/EPDM - 1/32" thick Nylon cord -40F to +160F -40C to +71C 50 ft. maximum Hand built $250.00 minimum order per size Straight ends
Working Pressure (psi) (Mpa) 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 1.60 1.90 2.30 2.50 3.00 3.30 3.70 4.00 4.50 4.80 5.40 6.20 7.00 7.70 9.30 10.00 2.38 2.83 3.42 3.72 4.46 4.91 5.51 5.95 6.70 7.14 8.04 9.23 10.42 10.72 13.84 14.88
Product Number 11474600502v 11474602502v 11474603502v 11474604502v 11474605502v 11474606502v 11474607502v 11474608502v 11474609502v 11474610502v 11474612502v 11474614502v 11474618502v 11474619502v 11474620502v 11474621502v
Nominal I.D. (inches) (mm) 4 5 6 6-5/8 8 8-5/8 10 10-3/4 12 12-3/4 14 16 18 20 24 26 101.60 127.00 152.40 168.28 203.20 219.08 254.00 273.05 304.80 323.85 355.60 406.40 457.20 508.00 690.60 660.40
Nominal O.D. (inches) (mm) 4.44 5.44 6.44 7.06 8.44 9.06 10.44 11.19 12.44 13.19 14.44 16.44 18.44 20.44 24.56 26.44 112.71 138.11 163.51 179.39 214.31 230.19 265.11 284.16 315.91 331.79 366.71 417.51 468.31 519.11 623.89 671.51
Plies 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
SPECIAL APPLICATIONS
Resistance:
G
Branding:
1. EN 1361/1997/C Size-20-NFPA 407/2001 Month Year Serial Number 2. HBD Industries Flightmaster Aircraft Refueling Hose API 1529/1998 Grade 2 Type C 300 PSI (2000 Kilopascal) WP
NBR CR, static dissipating 2-ply cord for 1" and 1-1/4" I.D 4-ply cord for 1-1/2" to 4" I.D. Temperature Range: -22F to +131F -30C to +55C Packaging: Make to Order (MTO), 1200 ft. minimum Coupled lengths available, maximum is 100 ft. Contact Salisbury for details
Product Number 17815990002 17815992002 17815994002 17815993002 17815998002 17815999002 17816000002v Nominal I.D. (inches) (mm) 1 1-1/4 1-1/2 2 2-1/2 3 4 25.40 31.75 38.10 50.80 63.50 76.20 101.60 Nominal O.D. (inches) (mm) 1.56 1.81 2.13 2.63 3.22 3.75 4.75 39.69 46.04 53.98 66.68 81.76 95.25 120.65 Plies 2 2 4 4 4 4 4 Working Pressure (psi) (Mpa) 300 300 300 300 300 300 300 2.07 2.07 2.07 2.07 2.07 2.07 2.07 Min. Bend Radius (inches) (mm) 4.50 5.50 7.00 8.50 12.00 15.00 30.00 114.30 139.70 177.80 215.90 304.80 381.00 762.00 Weight (lb/ft) (Kg/m) 0.69 0.81 1.16 1.37 1.88 2.12 2.86 1.03 1.21 1.73 2.04 2.80 3.15 4.26
v = Make To Order (MTO) * Test pressuring is a 2:1 ratio with working pressure
91
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
SPECIAL APPLICATIONS
92
Resistance:
G
Branding:
HBD Industries Jac Risor Aircraft Refueling Hose NFPA 407/2001 300 PSI (2000 Kilopascal) WP Quarter Year Serial Number
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Product Number 17816053002v 17816011002v Nominal I.D. (inches) (mm) 3 4 76.20 101.60 Nominal O.D. (inches) (mm) 3.94 4.94 100.01 125.41 Plies 4 4
Black High NBR CR, static dissipating Four synthetic plies with a dual wire helix(es) -22F to +131F -30C to +55C Make to Order (MTO), 500 ft. minimum Coupled lengths available, maximum is 100 ft.
Min. Bend Radius (inches) (mm) 15.00 20.00 381.00 508.00 Weight (lb/ft) (Kg/m) 3.10 4.10 4.61 6.10
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range:
Black Limited EPDM Flexible braid of stainless steel wire One braid of high-tensile carbon steel wire -40F to +600F -40C to +315C With cooling water flowing through the hose at a velocity of 20 feet per second 50 ft. maximum, all lengths. Minimum order is 500 ft. per size
Min. Bend Radius (inches) (mm) 8.00 10.00 12.00 16.00 203.20 254.00 304.80 406.40 Weight (lb/ft) (Kg/m) 0.61 0.80 0.95 1.20 0.91 1.19 1.41 1.79
Packaging:
Product Number 01164461502v 01164462502 01164463502 01164464502 Nominal I.D. (inches) (mm) 1 1-1/4 1-1/2 2 25.40 31.75 38.10 50.80 Nominal O.D. (inches) (mm) 1.69 1.88 2.13 2.63 42.86 47.63 53.98 66.68 Reinforcement Braids 3 3 3 3
Working Pressure (psi) (Mpa) 250 250 250 250 1.72 1.72 1.72 1.72
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
SPECIAL APPLICATIONS
Resistance:
Branding:
HBD Industries,Inc. Highflex Rotary-(month)-(Year) 5000 psig W.P.-Grade D-Made In USA + Warning: Caution Statement
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Couplings:
Black High NBR, RMA Class A CR, Class C Multiple plies of bead wire (8 or 10) and synthetic cord fabric -20F to +200F -29C to +93C Lengths over 30 ft. shipped on metal reels Shorter pieces shipped straight slat packed Only uncoupled hose is available at this time
Min. Bend Radius (inches) (mm) 48.00 48.00 54.00 1219.20 1219.20 1371.60 (lb/ft) 11.30 12.40 17.43 Weight (Kg/m) 16.82 18.45 25.94
Nominal O.D. (inches) (mm) 4.25 4.72 5.44 107.95 119.86 138.11
Plies 8 8 10
Working Pressure (psi) (Mpa) 5000 5000 5000 34.48 34.48 34.48
Resistance:
Black Medium
CR CR Multiple plies of synthetic cord fabric with a helical wire Temperature Range: -30F to +200F -34C to +93C Packaging: 50 ft. maximum Hand built $250.00 minimum order per size Couplings: Built-in nipples
Product Number 11560006002v 11560008002v 11560010002v 11560012002v Nominal I.D. (inches) (mm) 6 8 10 12 152.40 203.20 254.00 304.80 Nominal O.D. (inches) (mm) 7.50 9.63 11.75 13.88 190.50 244.48 298.45 352.43 Plies 3 4 5 6 Working Pressure (psi) (Mpa) 100 100 100 100 0.69 0.69 0.69 0.69 Min. Bend Radius (inches) (mm) 36.00 48.00 60.00 72.00 914.40 1219.20 1524.00 1828.80 (lb/ft) 9.70 15.90 22.00 28.30 Weight (Kg/m) 14.44 23.66 32.74 42.12
93
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
SPECIAL APPLICATIONS
94
Resistance:
Branding: Thermoid HBD Industries Highflex Rotary 4000 PSI Grade C Made In USA Month Year + Warning: Caution Statement Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Couplings: Black High NBR, RMA Class A CR Grade C with white layline stripe Multiple layers of spiralled high tensile carbon steel wire -20F to +200F -29C to +93C 100 ft. lengths maximum Lengths for Rotary and Vibrator hose are measured overall from threaded end to threaded end of the couplings Special swaged on type. 3" male API line pipe thread on 2-1/2" size. 4" male API line pipe thread on 3" and 3-1/2" sizes
Min. Bend Radius (inches) (mm) 48.00 48.00 54.50 1219.20 1219.20 1371.60 (lb/ft) 9.00 13.10 17.40 Weight (Kg/m) 13.39 19.50 25.90
Nominal O.D. (inches) (mm) 3.88 5.00 5.56 98.43 127.00 141.29
Plies 6 8 8
Working Pressure (psi) (Mpa) 4000 4000 4000 27.59 27.59 27.59
v = Make To Order (MTO) * Test Pressure is 8,000 psi, a 2:1 ratio to working pressure. Minimum burst is 10,000 psi for each size.
Resistance:
Branding: Thermoid HBD Industries Slim Hole Rotary 2500 PSI WP Serial Number Made In USA
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Couplings:
Black High NBR, RMA Class A CR with white layline stripe pinpricked Multiple layers of spiralled high tensile steel wire, plus two fabric plies under the wire -20F to +200F -29C to +93C 100 ft. lengths maximum Swaged on high pressure carbon steel male NPT or API threaded ends or reusable couplings
Min. Bend Radius (inches) (mm) 18.00 24.00 30.00 457.20 609.60 762.00 Weight (lb/ft) (Kg/m) 5.00 6.00 7.00 7.44 8.93 10.42
Nominal O.D. (inches) (mm) 3.13 3.63 4.19 79.38 92.08 106.36
Plies 4 4 4
Working Pressure (psi) (Mpa) 2500 2500 2500 17.24 17.24 17.24
v = Make To Order (MTO) * Test Pressure is 5,000 psi, a 2:1 ratio to working pressure. Minimum burst is 6,250 psi for each size.
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Limited SBR/NR, 1/4" thick SBR/EPDM Multiple plies of heavy fabric -40F to +160F -40C to +71C 50 ft. maximum, all lengths Minimum order is 500 ft. per size
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.70 1.00 1.20 1.30 1.70 2.00 2.40 1.04 1.49 1.79 1.93 2.53 2.98 3.57
Nominal I.D. (inches) (mm) 3/4 1 1-1/4 1-1/2 2 2-1/2 3 19.05 25.40 31.75 38.10 50.80 63.50 76.20
Nominal O.D. (inches) (mm) 1.50 1.88 2.16 2.38 2.88 3.41 3.91 38.10 47.63 54.77 60.33 73.03 86.52 99.22
Plies 4 4 4 4 4 4 4
Working Pressure (psi) (Mpa) 150 150 150 150 100 100 100 1.03 1.03 1.03 1.03 0.69 0.69 0.69
Resistance:
Black Limited SBR/NR, 1/4" thick SBR/EPDM Multiple plies of heavy fabric 50 ft. maximum, all lengths Minimum order is 500 ft. per size
Working Pressure (psi) (Mpa) 150 150 150 150 150 100 1.03 1.03 1.03 1.03 1.03 0.69 Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.50 0.70 1.00 1.20 1.30 1.70 0.74 1.04 1.49 1.79 1.93 2.53
Nominal I.D. (inches) (mm) 1/2 3/4 1 1-1/4 1-1/2 2 12.70 19.05 25.40 31.75 38.10 50.80
Nominal O.D. (inches) (mm) 1.19 1.50 1.88 2.16 2.38 2.88 30.16 38.10 47.63 54.77 60.33 73.03
95
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
STEAM
96
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black or Red Medium EPDM, RMA Class C EPDM, RMA Class C Two braids of carbon steel wire For saturated steam service to +406F (+208C) Super-heated steam to +450F (+232C) Reels 1/2"-1" I.D. or 50 ft. lengths 2-1/2" I.D. 50 ft. lengths
Min. Bend Radius (inches) (mm) 3.00 4.50 7.00 17.00 3.00 4.50 7.00 76.20 114.30 177.80 431.80 76.20 114.30 177.80 Weight (lb/ft) (Kg/m) 0.38 0.52 0.77 2.00 0.38 0.52 0.77 0.57 0.77 1.15 2.98 0.57 0.77 1.15
Product Number Black 22062321662 22062481662 22062641662 01104426502 Red 22062322662 22062482662 22062642662
Nominal I.D. (inches) (mm) 1/2 3/4 1 2-1/2 1/2 3/4 1 12.70 19.05 25.40 63.50 12.70 19.05 25.40
Nominal O.D. (inches) (mm) 1.06 1.28 1.53 3.13 1.06 1.28 1.53 26.99 32.54 38.89 79.38 26.99 32.54 38.89
Reinforcement Braids 2 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 250 250 250 250 250 250 250 1.72 1.72 1.72 1.72 1.72 1.72 1.72
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black or Red Limited EPDM EPDM Two braids of carbon steel wire For saturated steam service to +406F (+208C) Super-heated steam to +450F (+232C) Reels 1/2"-1" I.D. or 50 ft. lengths 1-1/4" - 2" I.D. 50 ft. lengths
Min. Bend Radius (inches) (mm) 3.00 4.50 7.00 8.75 10.50 14.00 3.00 4.50 7.00 76.20 114.30 177.80 222.25 266.70 355.60 76.20 114.30 177.80 Weight (lb/ft) (Kg/m) 0.38 0.52 0.77 1.10 1.23 1.62 0.38 0.52 0.77 0.57 0.77 1.15 1.64 1.83 2.41 0.57 0.77 1.15
Product Number Black 22052321662 22052481662 22052641662 01104413502 01104414502 01104415502 Red 22052322662 22052482662 22052642662
Nominal I.D. (inches) (mm) 1/2 3/4 1 1-1/4 1-1/2 2 1/2 3/4 1 12.70 19.05 25.40 31.75 38.10 50.80 12.70 19.05 25.40
Nominal O.D. (inches) (mm) 1.00 1.28 1.53 1.88 2.11 2.66 1.00 1.28 1.53 25.40 32.54 38.89 47.63 53.58 67.47 25.40 32.54 38.89
Reinforcement Braids 2 2 2 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 250 250 250 250 250 250 250 250 250 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
STEAM
Resistance:
Branding: Thermoid HBD Industries Pile Driver Steam Hose 200 PSI WP Serial Number Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Plies 4 4 4 4 6
Black Limited EPDM, also available in CR for oil resistance EPDM, also available in CR for oil resistance Multiple plies of tire cord and plated steel cable Saturated steam service to +388F (+198C) 100 ft. maximum Minimum order 300 ft.
Min. Bend Radius (inches) (mm) 20.00 25.00 30.00 40.00 60.00 508.00 635.00 762.00 1016.00 1524.00 (lb/ft) 4.10 5.40 6.40 9.30 18.60 Weight (Kg/m) 6.10 8.04 9.52 13.84 27.68
Nominal I.D. (inches) (mm) 2 2-1/2 3 4 6 50.80 63.50 76.20 101.60 152.40
Nominal O.D. (inches) (mm) 3.13 3.38 4.50 5.63 7.81 79.38 85.73 114.30 142.88 198.44
Working Pressure (psi) (Mpa) 200 200 200 200 200 1.38 1.38 1.38 1.38 1.38
97
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
WATER/FIRE Water
98
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Product Number 00512281249v 00512281255v Nominal I.D. (inches) (mm) 5/8 3/4 15.88 19.05 Nominal O.D. (inches) (mm) 0.94 1.06 23.81 26.98 Reinforcement Spirals 2 2
Black Limited EPDM EPDM Spiral polyester yarn -40F to +180F -40C to +82C 50 ft. lengths 5 per carton
Min. Bend Radius (inches) (mm) 3.75 4.50 95.25 114.30 Weight (lb/ft) (Kg/m) 0.23 0.27 0.34 0.40
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Limited EPDM EPDM Spiral polyester yarn -40F to +180F -40C to +82C 50 ft. lengths 5 per carton
Min. Bend Radius (inches) (mm) 3.75 4.50 95.25 114.30 Weight (lb/ft) (Kg/m) 0.23 0.27 0.34 0.40
Reinforcement Spirals 2 2
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
WATER/FIRE Water
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Limited EPDM EPDM Spiral polyester yarn -40F to +180F -40C to +82C 25 ft. or 50 ft. lengths 5 per carton
Min. Bend Radius (inches) (mm) 3.75 4.50 3.75 4.50 95.25 114.30 95.25 114.30 Weight (lb/ft) (Kg/m) 0.18 0.24 0.18 0.24 0.27 0.36 0.27 0.36
Nominal I.D. (inches) (mm) 5/8 3/4 5/8 3/4 15.88 19.05 15.88 19.05
Nominal O.D. (inches) (mm) 0.88 1.03 0.88 1.03 22.23 26.19 22.23 26.19
Reinforcement Spirals 2 2 2 2
Working Pressure (psi) (Mpa) 100 100 100 100 0.69 0.69 0.69 0.69
Resistance:
Branding: None
Green Limited EPDM EPDM Spiral polyester yarn -40F to +180F -40C to +82C 50 ft. lengths 5 per carton
Min. Bend Radius (inches) (mm) 3.75 95.25 Weight (lb/ft) (Kg/m) 0.19 0.28
99
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
WATER/FIRE Water
100
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Limited EPDM EPDM Spiral polyester yarn -40F to +200F -40C to +93C 50 ft. lengths 1 per carton
Min. Bend Radius (inches) (mm) 3.75 5.25 95.25 133.35 Weight (lb/ft) (Kg/m) 0.19 0.35 0.28 0.52
Reinforcement Spirals 2 2
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Limited EPDM EPDM Spiral polyester yarn -40F to +200F -40C to +93C Reels
Min. Bend Radius (inches) (mm) 2.25 57.15 Weight (lb/ft) (Kg/m) 0.13 0.19
Reinforcement Spirals 2
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
SBR, 3/32" thick SBR/EPDM, 1/16" thick Multiple plies of cord -40F to +160F -40C to +71C 50 ft. maximum Straight ends only 1/2" to 3" I.D., minimum order of 500 ft. 4" I.D. or larger, $250.00 minimum order
Working Pressure (psi) (Mpa) 200 200 200 200 200 200 150 150 150 125 125 100 100 150 75 100 1.38 1.38 1.38 1.38 1.38 1.38 1.03 1.03 1.03 0.86 0.86 0.69 0.69 1.03 0.52 0.69 Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.27 0.30 0.44 0.60 0.78 1.00 1.38 1.58 2.10 2.49 2.69 3.18 5.68 6.57 7.20 7.71 0.40 0.45 0.65 0.89 1.16 1.49 2.05 2.35 3.13 3.71 4.00 4.73 8.45 9.78 10.72 11.47
Product Number 11524480502v 11524482502v 11524483502v 11524484502v 11524485502v 11524486502v 11524487502v 11524488502v 11524490502v 11524491502v 11524492502v 11524494502v 11524495502v 11524497502v 11524498502v 11524499502v
Nominal I.D. (inches) (mm) 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 4-1/2 5 6 8 8 10 10 12.70 19.05 25.40 31.75 38.10 50.80 63.50 76.20 101.60 114.30 127.00 152.40 203.20 203.20 254.00 254.00
Nominal O.D. (inches) (mm) 0.94 1.18 1.44 1.75 2.06 2.56 3.06 3.56 4.63 5.06 5.56 6.56 8.75 9.00 10.81 11.00 23.81 29.97 36.51 44.45 52.39 65.09 77.79 90.49 117.48 128.59 141.29 166.69 222.25 228.60 274.64 279.40
Plies 4 4 4 4 4 4 4 4 4 4 4 4 6 8 6 8
Resistance:
Branding: Thermoid HBD Industries Type 1788 Paper Mill Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Gray Limited SBR SBR Multiple plies of medium weight fabric -40F to +160F -40C to +71C 50 ft. lengths
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.35 0.49 0.64 0.74 0.52 0.73 0.95 1.10
1 End Tapered
Product Number 21284434502 21284435502 21284436502 21284437502v Nominal I.D. (inches) (mm) 3/4 1 1-1/4 1-1/2 19.05 25.40 31.75 38.10 Nominal O.D. (inches) (mm) 1.31 1.47 1.75 2.00 33.34 37.31 44.45 50.80 Plies 3 4 4 4 Working Pressure (psi) (Mpa) 150 150 150 125 1.03 1.03 1.03 0.86
101
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Branding: Thermoid HBD Industries Cascade Paper Mill Washdown WP Made In USA
SBR, 1/8" thick for 2-ply and 3/32" thick for 4-ply Cover: SBR Reinforcement: Multiple plies of polyester cord Temperature Range: -40F to +160F -40C to +71C Packaging: Tapered end 50 ft. Straight end 50 ft. to 100 ft. Tapered end one end only Other colors available, 1200 ft. minimum
Product Number 17828030502 17828031502 17828032502 17828033502 17828034502v 17828035502v 17828001502 17828002502 17828000502 17828003502v 17828004502v 17828005502v Nominal I.D. (inches) (mm) 3/4 1 1-1/4 1-1/2 2 2-1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 19.05 25.40 31.75 38.10 50.80 63.50 19.05 25.40 31.75 38.10 50.80 63.50 Nominal O.D. (inches) (mm) 1.16 1.41 1.75 2.00 2.50 3.03 1.16 1.41 1.75 2.00 2.50 3.03 29.36 35.71 44.45 50.80 63.50 76.96 29.36 35.71 44.45 50.80 63.50 76.96 Spirals/ Plies 2 2 2 2 2 2 4 4 4 4 4 4 Working Pressure (psi) (Mpa) 150 150 150 150 150 150 150 150 150 150 150 150 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.34 0.43 0.66 0.74 0.92 1.29 0.38 0.56 0.69 0.80 0.96 1.35 0.51 0.64 0.98 1.10 1.37 1.92 0.57 0.83 1.03 1.19 1.43 2.01
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Branding: Thermoid/HBD Industries, Inc. BF-10 PVC Water Discharge-Blue, I.D. Made In USA
Blue Medium PVC, co-extruded PVC, co-extruded Polyester -5F to +130F -21C to +54C 300 ft. maximum Common long or short shank and quick acting with bands or clamps
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.09 0.12 0.17 0.22 0.25 0.31 0.44 0.73 0.13 0.18 0.25 0.33 0.37 0.46 0.65 1.09
Working Pressure (psi) (Mpa) 110 80 70 65 55 55 50 35 0.76 0.55 0.48 0.45 0.38 0.38 0.34 0.24
103
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Couplings:
Blue Medium PVC PVC 2 spiral plies and one longitudinal ply of polyester fiber 0F to +150F -18C to +66C 300 ft. maximum Shank type, quick acting
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.15 0.23 0.37 0.53 1.10 0.22 0.34 0.55 0.79 1.64
Nominal I.D. (inches) (mm) 1-1/2 2 3 4 6 38.10 50.80 76.20 101.60 152.40
Nominal Wall Thickness (inches) (mm) 0.06 0.06 0.06 0.06 0.06 1.52 1.52 1.52 1.52 1.52 2 2 2 2 2
Plies * S S S S S + + + + + 1 1 1 1 1 L L L L L
* 2 S + 1 L = 2 spiral plies plus one longitudinal ply of polyester fiber. v = Make To Order (MTO) n/a = Not Applicable
Resistance:
Branding: Thermoid HBD Industries Transporter Water Discharge Made In USA Black Limited EPDM EPDM Synthetic cord -40F to +180F -40C to +82C 100 ft. maximum
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.30 0.40 0.60 0.90 2.00 0.45 0.60 0.89 1.34 2.98
Working Pressure (psi) (Mpa) 100 100 100 100 100 0.69 0.69 0.69 0.69 0.69
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Limited EPDM EPDM Heavy plies of polyester cord in sizes 1" to 4" I.D. 2 plies 5" and 6" I.D. 4 plies -40F to +180F -40C to +82C 100 ft. maximum
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.27 0.32 0.38 0.56 0.70 0.76 1.13 2.45 2.77 0.40 0.48 0.57 0.83 1.04 1.13 1.68 3.65 4.12
Product Number 17826010002v 17826012502v 17826015002v 17826020002 17826025002 17826030002 17826040002 17826050002v 17826060002
Nominal I.D. (inches) (mm) 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 25.40 31.75 38.10 50.80 63.50 76.20 101.60 127.00 152.40
Nominal O.D. (inches) (mm) 1.28 1.53 1.78 2.28 2.80 3.28 4.31 5.50 6.50 32.54 38.89 53.18 57.94 71.04 83.34 109.54 139.70 165.10
Plies 2 2 2 2 2 2 2 4 4
Working Pressure (psi) (Mpa) 150 150 150 150 150 150 150 150 150 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03
105
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Branding: Thermoid HBD Industries Transporter Water Suction & Discharge Hose WP Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Black Limited EPDM EPDM Synthetic cord with spiral wire helix(es) wire inserted -40F to +180F -40C to +82C 100 ft. maximum
Min. Bend Radius (inches) (mm) 2.50 3.00 4.00 6.00 8.50 11.00 14.00 30.00 63.50 76.20 101.60 152.40 215.90 279.40 355.60 762.00 Weight (lb/ft) (Kg/m) 0.50 0.60 0.70 0.90 1.30 1.80 2.60 4.10 0.74 0.89 1.04 1.34 1.93 2.68 3.87 6.10
Product Number 17834010002v 17834012502v 17834015002 17834020002 17834025002 17834030002 17834040002 17830600002
Nominal I.D. (inches) (mm) 1 1-1/4 1-1/2 2 2-1/2 3 4 6 25.40 31.75 38.10 50.80 63.50 76.20 101.60 152.40
Nominal O.D. (inches) (mm) 1.44 1.69 1.94 2.44 3.00 3.56 4.63 6.67 36.51 42.86 49.21 61.91 76.20 90.49 117.48 169.47
Plies 2 2 2 2 2 2 2 2
Working Pressure (psi) (Mpa) 200 200 200 150 150 150 150 100 1.38 1.38 1.38 1.03 1.03 1.03 1.03 0.69
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: Ends:
Product Number 11484045502v 11484050502v 11484060502v 11484070502v 11484080502v 11484090502v 11484100502v 11484108502v 11484120502v 11484128502v 11484140502v 11484160502v 11484180502v Nominal I.D. (inches) (mm) 4-1/2 5 6 6-5/8 8 8-5/8 10 10-3/4 12 12-3/4 14 16 18 114.30 127.00 152.40 168.28 203.20 219.08 254.00 273.05 304.80 323.85 355.60 406.40 457.20 Nominal O.D. (inches) (mm) 5.31 5.81 6.81 7.44 8.81 9.44 10.81 11.56 12.88 13.63 14.94 16.94 19.00 134.94 147.64 173.04 188.91 223.84 239.71 274.64 293.69 327.03 346.08 379.41 430.21 482.60 Plies 2 2 2 2 2 2 2 2 3 3 3 3 3
Black Medium CR, corrugated CR, corrugated Multiple plies of synthetic fabric with spiral wire helix(es) -40F to +180F -40C to +82C 15 ft. lengths, maximum $250.00 minimum order 2" soft cuff with capped ends
Min. Bend Radius (inches) (mm) 4.50 5.00 6.00 6.63 8.00 8.63 10.00 10.75 12.00 12.75 14.00 16.00 18.00 114.30 127.00 152.40 168.28 203.20 219.08 254.00 273.05 304.80 323.85 355.60 406.40 457.20 Weight (lb/ft) (Kg/m) 3.90 4.20 4.90 6.10 6.20 6.60 8.90 9.40 11.00 11.30 14.20 15.90 17.70 5.80 6.25 7.29 9.08 9.23 9.82 13.25 13.99 16.37 16.82 21.13 23.66 26.34
Working Pressure (psi) (Mpa) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a
Resistance:
Branding: None
PVC PVC Helical PVC rod 0F to +150F -18C to +66C Coils, 100 ft. maximum 1" to 4" I.D. 40 ft. maximum 6" I.D.
150 Degrees F Weight (lb/ft) (Kg/m) 0.25 0.39 0.57 1.00 1.16 1.82 3.09 0.37 0.58 0.85 1.49 1.73 2.71 4.60
70 Degrees F Product Number 19121001002 19121501002 19122001002 19122501002v 19123001002 19124001002 19126001002v Nominal I.D. (inches) (mm) 1 25.40 1-1/2 38.10 2 50.80 2-1/2 63.50 3 76.20 4 101.60 6 152.40 Nominal O.D. (inches) (mm) 1.13 28.58 1.78 45.21 2.29 58.17 2.90 73.66 3.42 86.87 4.52 114.81 6.70 170.18 Plies n/a n/a n/a n/a n/a n/a n/a
Working Pressure Working Pressure Min.Bend Radius (psi) (Mpa) (psi) (Mpa) (inches) (mm) 100 90 90 100 90 75 50 0.69 0.62 0.62 0.69 0.62 0.52 0.34 25 25 25 25 20 20 n/a 0.17 0.17 0.17 0.17 0.14 0.14 n/a 3.00 4.00 5.00 6.00 7.00 10.00 16.00 76.20 101.60 127.00 152.40 177.80 254.00 406.40
107
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Green Medium PVC PVC Helical PVC rod 0F to +150F -18C to +66C Coils, 100 ft. maximum 1-1/2" to 4" I.D.
150 Degrees F Weight (lb/ft) (Kg/m) 0.39 0.57 0.94 1.48 0.58 0.85 1.40 2.20
70 Degrees F Product Number 19061501002v 19062001002 19063001002 19064001002v Nominal I.D. (inches) (mm) 1-1/2 38.10 2 50.80 3 76.20 4 101.60 Nominal O.D. (inches) (mm) 1.75 44.45 2.31 58.74 3.41 86.52 4.47 113.51 Plies n/a n/a n/a n/a
Working Pressure Working Pressure Min.Bend Radius (psi) (Mpa) (psi) (Mpa) (inches) (mm) 90 90 75 60 0.62 0.62 0.52 0.41 25 25 25 25 0.17 0.17 0.17 0.17 5.00 7.00 10.00 14.00 127.00 177.80 254.00 355.60
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Clear Medium PVC PVC Helical PVC rod 0F to +150F -18C to +66C Coils, 100 ft. maximum 1-1/2" to 4" I.D.
150 Degrees F Weight (lb/ft) (Kg/m) 0.39 0.57 1.00 1.16 1.82 0.58 0.85 1.49 1.73 2.71
70 Degrees F Product Number 19141501002 19142001002 19142501002v 19143001002 19144001002 Nominal I.D. (inches) (mm) 1-1/2 38.10 2 50.80 2-1/2 63.50 3 76.20 4 101.60 Nominal O.D. (inches) (mm) 1.80 45.72 2.34 59.44 2.91 73.91 3.46 87.88 4.50 114.30 Plies n/a n/a n/a n/a n/a
Working Pressure Working Pressure Min.Bend Radius (psi) (Mpa) (psi) (Mpa) (inches) (mm) 90 90 100 90 75 0.62 0.62 0.69 0.62 0.52 25 25 25 25 20 0.17 0.17 0.17 0.17 0.14 4.00 5.00 6.00 7.00 10.00 101.60 127.00 152.40 177.80 254.00
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Clear Medium PVC PVC Helical PVC rod 0F to +150F -18C to +66C Coils, 100 ft. maximum 1-1/2" to 4" I.D.
150 Degrees F Weight (lb/ft) (Kg/m) 0.31 0.48 0.67 0.84 1.63 0.46 0.71 1.00 1.25 2.43
70 Degrees F Product Number 19171501002v 19172001002v 19172501002v 19173001002v 19174001002v Nominal I.D. (inches) (mm) 1-1/2 38.10 2 50.80 2-1/2 63.50 3 76.20 4 101.60 Nominal O.D. (inches) (mm) 1.73 43.94 2.28 57.91 2.81 71.37 3.30 83.82 4.46 113.28 Plies n/a n/a n/a n/a n/a
Working Pressure Working Pressure Min.Bend Radius (psi) (Mpa) (psi) (Mpa) (inches) (mm) 55 50 45 40 35 0.38 0.34 0.31 0.28 0.24 15 15 12.5 12.5 10 0.10 0.10 0.09 0.09 0.07 4.00 5.00 6.00 7.00 10.00 101.60 127.00 152.40 177.60 254.00
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Green Medium PVC PVC Helical PVC rod 0F to +150F -18C to +66C Coils, 100 ft. maximum 1-1/2" to 4" I.D. 40 ft. maximum 5" to 6" I.D.
150 Degrees F Weight (lb/ft) (Kg/m) 0.54 0.81 1.13 1.35 1.75 2.22 2.83 4.23 0.80 1.21 1.68 2.01 2.60 3.30 4.21 6.30
70 Degrees F Product Number 19011501002v 19012001002 19012501002v 19013001002 19013501002v 19014001002v 19015001002v 19016001002v Nominal I.D. (inches) (mm) 1-1/2 38.10 2 50.80 2-1/2 63.50 3 76.20 3-1/2 88.90 4 101.60 5 127.00 6 152.40 Nominal O.D. (inches) (mm) 1.89 2.39 2.94 3.45 4.09 4.60 5.65 6.76 48.01 60.71 74.68 87.63 103.89 116.84 143.51 171.70 Plies n/a n/a n/a n/a n/a n/a n/a n/a
Working Pressure Working Pressure Min.Bend Radius (psi) (Mpa) (psi) (Mpa) (inches) (mm) 150 130 106 100 75 75 75 60 1.03 0.90 0.73 0.69 0.52 0.52 0.52 0.41 65 55 50 45 35 30 20 20 0.45 0.38 0.34 0.31 0.24 0.21 0.14 0.14 7.00 8.00 10.00 12.00 15.00 17.00 24.00 32.00 177.80 203.20 254.00 304.80 381.00 431.80 609.60 812.80
* Sizes 1-1/2" I.D. to 4" I.D. 100 ft. per coil, sizes 5" I.D. to 6" I.D. 40 ft. per coil v = Make To Order (MTO) n/a = Not Applicable
109
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Yellow Medium PVC PVC Helical PVC rod 0F to +150F -18C to +66C Coils, 100 ft. maximum 1" to 4" I.D. 40 ft. maximum 6" I.D.
150 Degrees F Weight (lb/ft) (Kg/m) 0.28 0.47 0.68 1.00 1.18 1.45 1.82 3.00 0.42 0.70 1.01 1.49 1.76 2.16 2.71 4.46
70 Degrees F Product Number 19041001002v 19041501002v 19042001002v 19042501002v 19043001002v 19043501002v 19044001002v 19046001002v Nominal I.D. (inches) (mm) 1 25.40 1-1/2 38.10 2 50.80 2-1/2 63.50 3 76.20 3-1/2 88.90 4 101.60 6 152.40 Nominal O.D. (inches) (mm) 1.27 1.84 2.37 2.90 3.43 4.03 4.52 6.70 32.26 46.74 60.20 73.66 87.12 102.36 114.81 170.18 Plies n/a n/a n/a n/a n/a n/a n/a n/a
Working Pressure Working Pressure Min.Bend Radius (psi) (Mpa) (psi) (Mpa) (inches) (mm) 140 120 100 100 90 75 75 50 0.96 0.83 0.69 0.69 0.62 0.52 0.52 0.34 40 40 35 35 30 25 25 15 0.28 0.28 0.24 0.24 0.21 0.17 0.17 0.10 4.00 6.00 7.00 8.00 10.00 12.00 14.00 25.00 101.60 152.40 177.80 203.20 254.00 304.80 355.60 635.00
* Size 6" I.D is 40 ft. to a coil, all other sizes are 100 ft. to a coil v = Make To Order (MTO) n/a = Not Applicable
Resistance:
Branding: None
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Green Medium PVC PVC Helical PVC rod 0F to +150F -18C to +66C Coils, 100 ft. maximum 1-1/2" to 4" I.D.
150 Degrees F Weight (lb/ft) (Kg/m) 0.31 0.48 0.67 0.84 1.63 0.46 0.71 1.00 1.25 2.43
70 Degrees F Product Number 19151501002 19152001002v 19152501002v 19153001002v 19154001002v Nominal I.D. (inches) (mm) 1-1/2 38.10 2 50.80 2-1/2 63.50 3 76.20 4 101.60 Nominal O.D. (inches) (mm) 1.73 43.94 2.28 57.91 2.81 71.37 3.30 83.82 4.46 113.28 Plies n/a n/a n/a n/a n/a
Working Pressure Working Pressure Min.Bend Radius (psi) (Mpa) (psi) (Mpa) (inches) (mm) 55 50 45 40 35 0.38 0.34 0.31 0.28 0.24 15 15 12.5 12.5 10 0.10 0.10 0.09 0.09 0.07 4.00 5.00 6.00 7.00 10.00 101.60 127.00 152.40 177.80 254.00
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
WATER/FIRE Washdown
DARI-PREEN CREAMERY
Dari-Preen is designed for washdown service in creameries, dairies, packing houses, canneries and food processing plants. It features an EPDM tube and cover. Color coded white to indicate washdown service and cleanliness. Its tough cover resists scuffing and cracking. Dari-Preen handles hot water up to 200F at 50 psi and it is rated for working pressures up to 250 psi on 1/2" I.D.
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
White Limited EPDM EPDM Spiral polyester yarn -40F to +180F -40C to +82C Reels, 50 ft. length 1 per carton
Min. Bend Radius (inches) (mm) 3.00 4.50 4.50 76.20 114.30 114.30 Weight (lb/ft) (Kg/m) 0.29 0.50 0.50 0.43 0.74 0.74
Nominal I.D. (inches) (mm) 1/2 3/4 3/4 12.70 19.05 19.05
Nominal O.D. (inches) (mm) 0.91 1.25 1.25 23.02 31.75 31.75
Reinforcement Spirals 4 4 4
Working Pressure (psi) (Mpa) 250 200 200 1.72 1.38 1.38
SANI-WHITE WASHDOWN
Sani-White Washdown hose is recommended for open-end washdown service in food processing plants where service is not too severe, such as dairies, canneries, packing houses and bottling plants. This hose features a SBR tube that is heat resistant and stands up to the action of hot water and steam. It also resists saturated steam pressure to 40 psi (287F) in open end service. Sani-White Washdown hose is available in tapered and straight ends. The white NBR/PVC cover resists oil, grease and cleaning compounds.
Resistance:
Branding: Thermoid HBD Industries Sani-White Washdown Made In USA Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging: White Limited SBR NBR/PVC Plies of strong fabric -20F to +160F -29C to +71C Tapered end 50 ft. lengths Will not cut tapered ends Minimum run 1200 ft. per size.
Min. Bend Radius (inches) (mm) n/a n/a n/a n/a n/a n/a Weight (lb/ft) (Kg/m) 0.25 0.33 0.46 0.37 0.49 0.68
Straight End
Product Number 21284460502 21284461502 21284462502v Nominal I.D. (inches) (mm) 1/2 3/4 1 12.70 19.05 25.40 Nominal O.D. (inches) (mm) 0.94 1.16 1.47 23.81 29.37 37.31 Plies 3 3 4
Working Pressure (psi) (Mpa) 150 125 100 1.03 0.86 0.69
Tapered End
Product Number 21284465502v n/a = Not Applicable Nominal I.D. (inches) (mm) 3/4 19.05 Nominal O.D. (inches) (mm) 1.16 29.37 Plies 3 Working Pressure (psi) (Mpa) 125 0.86 Min. Bend Radius (inches) (mm) n/a n/a Weight (lb/ft) (Kg/m) 0.33 0.49
111
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
WATER/FIRE Fire
112
Resistance:
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Red Medium, high NBR/PVC, RMA Class A NBR/PVC, RMA Class A, 1-1/2" I.D. EPDM 2-spiral aramid yarn -20F to +190F, 1-1/2" I.D. -40F to +190F -29C to +88C, 1-1/2" I.D. -40C to +88C Reels, coupled lengths available on a make-to-order basis
Min. Bend Radius (inches) (mm) 4.50 7.00 10.50 114.30 177.80 266.70 Weight (lb/ft) (Kg/m) 0.41 0.51 0.71 0.61 0.76 1.06
Nominal O.D. (inches) (mm) 1.19 1.50 2.00 30.16 38.10 50.80
Reinforcement Spirals 2 2 4
Working Pressure (psi) (Mpa) 800 800 250 5.51 5.51 1.72
* Reattachable chrome-plated aluminum NST spanner hole couplings available to fit 3/4" and 1" I.D.
Resistance:
Branding:
Ex. 3583 (Size) Fire Ext. and Booster Hose Issue No. 2051 U/L Listed Max. Working Pressure 250 PSIG - 54C (-65F)
Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Black Medium EPDM, RMA Class C EPDM, RMA Class C Synthetic high tensile cord -65F to +190F -54C to +88C Bulk or cut lengths
Min. Bend Radius (inches) (mm) 2.25 3.00 57.15 76.20 Weight (lb/ft) (Kg/m) 0.14 0.26 0.21 0.39
Reinforcement Spirals 2 4
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
WELDING
Resistance:
Branding: Size, Grade R Acetylene Only Std. Duty WP RMA 1P-7-99 Date Code Grade R Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Red, Green Limited - (Acetylene Only) EPDM EPDM Spiral polyester yarn -40F to +180F -40C to +82C Reels, Cut and coupled lengths Resistance:
Branding: Size, Grade R Acetylene Only Std. Duty WP RMA 1P-7-99 Date Code Grade R Cover Color: Oil Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Red, Green Limited - (Acetylene Only) EPDM EPDM Spiral polyester yarn -40F to +180F -40C to +82C Reels, Cut and coupled lengths
113
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
WELDING
114
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
WELDING
Resistance:
Branding: Size, Grade T Fuel Gas Std. Duty KX WP RMA 1P-7-99 Date Code
Grade T Cover Color: Fuel Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Red, Green Medium - High - (All Fuel Gases) Polychloroprene (CR) Polychloroprene (CR) Spiral polyester yarn -40F to +180F -40C to +82C Reels, Cut and coupled lengths Resistance:
Branding: Size, Grade T Fuel Gas Std. Duty KX WP RMA 1P-7-99 Date Code
Grade T Cover Color: Fuel Resistance: Construction: Tube: Cover: Reinforcement: Temperature Range: Packaging:
Red, Green Medium - High - (All Fuel Gases) Polychloroprene (CR) Polychloroprene (CR) Spiral polyester yarn -40F to +180F -40C to +82C Reels, Cut and coupled lengths
115
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
WELDING
116
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
TECHNICAL REFERENCE
FOREWORD:
This bulletin is issued to alert dealers and users of welding hose that special hose may be necessary for use with certain fuel gases.
SCOPE:
This bulletin relates to welding hose manufactured in conformance to RMA/CGA specification or to welding hose conforming to individual manufacturer or user specifications.
In recent years, there have been developed or adopted a number of fuel gases based on specific hydrocarbons or mixtures of hydrocarbons. It is known that these special fuel gases have a different effect on rubber compounds than does acetylene. The precise effect on all the many and varying hose compounds and constructions of the many manufacturers has not been determined for all the known special fuel gases. The effect of any material being conveyed in a hose on the rubber compounds used in the hose can be measured by one or several test procedures. In the case of fuel gases, the test procedures most applicable would be designed to measure a change of the physical properties after exposure to the fuel gas including tensile, elongation, hardness and volume. A characteristic of rubber hose that is significant in its use as welding hose is a phenomenon known as permeation. Any gas confined in the bore of a hose exhibits a tendency to pass through the tube wall and subsequently through the reinforcement and cover to the environment. Each gas has its own specific characteristic tendency to permeate. Each rubber compound exhibits specific resistance to permeation. The rate of permeation increases with higher temperature. To minimize the permeation of fuel gas through the hose wall it is logical to design the tube compound for the lowest possible permeation rate. The problem in the case of welding hose results from the variety of gases now encountered, the varying pressures used in service, and the varying temperatures to be found in the work place. The need to ventilate the work place is evident, both for maintaining the lowest practical temperature and to dissipate the permeating gas, however slight, to prevent buildup to concentrations that are either explosive or dangerous for breathing by workmen. Some rubber compounds are known to have low permeation rates with several fuel gases but no specific rule can be laid down to predict overall performance. Thus, it becomes advisable to check the characteristic of each hose construction with each gas under actual or simulated service conditions to qualify it for use.
CAUTION:
The fuel gases listed below are recorded to alert welding hose users to a potential hazard with these or similar gases. It should be noted that no condemnation of any of the gases listed is intended. The purpose is to advise against the use of hose that may not be designed for a particular gas or pressure. A user of any fuel gas is urged to relate the type of gas along with the expected working pressure (regulator setting) to the hose manufacturer for a specific hose recommendation.
ALERT LISTING:
These and similar fuel gases may damage some grades or types of welding hose: APACHE, FLAMEX, MAPP, PROPANE, PROPYLENE. Use of the indicated or similar fuel gases at regulator settings above 40 psi may be particularly hazardous. Users are also alerted against the use of ACETYLENE at any pressure above 15 psi.
IN-SERVICE CAUTION:
The user is first cautioned to shut off the gas at the torch and then at the regulator or supply source when the torch will not be used for periods in excess of 30 minutes, in order to limit permeation of gas through the hose wall. The user is further cautioned not to shut off the fuel gas at the regulator or supply source first as a flashback may result and thereby damage the hose. Adequate ventilation must be provided in confined areas where fuel gas is being used to prevent the accumulation or concentration of gas that could be explosive or otherwise harmful to personnel.
CAUTION:
Users of welding hose are urged to communicate their service conditions to the hose manufacturer and obtain the best recommendation of the manufacturer for a hose suitable for those conditions.
* Reprinted with permission from the Rubber Manufacturers Association (RMA) Hose Handbook, RMA/IP-2/2003.
BACKGROUND INFORMATION:
The RMA/CGA specification for welding hose, as originally promulgated, considered welding hose that would be used to convey the then common fuel gas, acetylene, at the recommended low pressure (15 psi). Several grades were described, the variance between grades relating to a difference in their resistance to deterioration in the presence of oil, or to their resistance to destruction by flame, or both. No differentiation was made for a variance in performance resulting from exposure to the fuel gas itself. It had been determined that actylene, when conveyed under the low pressures common to its recommended use, had little effect on hose, regardless of its composition or construction.
117
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
Petroleum
Liquid Food
Material Handling
TECHNICAL REFERENCE
118
MULTI-CHEM
1- 4
XLPE
EPDM
Chemical
CHLOROCHEM
114 - 4
EPDM
CHEMICAL H
1- 4
CR
CHEMICAL B
1- 4
EPDM
CHEMICAL V
112 - 4
FKM
NBR/PVC
Orange Black w/Blue Stripe Black w/White Stripe Red w/White Stripe Orange/ Black Red/Black
EBONITE L.T.
112 - 4
NBR/ECO
NBR
EBONITE X.L.W. CORRUGATED L.W. CORRUGATED TANK TRUCK RED/BLACK TANK TRUCK FLEX-DEVIL TYPE 924 PETROLEUM TRANSFER VAPOR RECOVERY OIL FIELD VACUUM FUEL TRANSFER GRAY SHADOW FOOD SUCTION FOOD DISCHARGE MATERIAL SUCTION MATERIAL DISCHARGE HOT TAR & ASPHALT TYPE 120 DRY CEMENT/ MATERIAL HOT AIR BLOWER
1- 4
NBR
NBR/PVC
2- 4
NBR
CR
NBR
NBR/PVC
NBR
NBR/PVC
NBR
CR
1- 4
NBR
NBR/PVC
3- 4
NBR
NBR/PVC
112 - 4
NBR/SBR
SBR/EPDM
2- 4
NBR NBR White FDA NBR White FDA NBR White FDA 3/16" NR White FDA 3/16" NR White FDA CR 1/8" , 3/16" ,1/4" Available SBR/NR EPDM
NBR/PVC
Black
112 - 4
NBR/PVC
Gray
114- 4
NBR/PVC
2-4
NBR/PVC
112 - 4
SBR
2- 4
SBR
112- 4
CR
SBR/EPDM
Black
2 1 2 - 4
EPDM
Brown
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
TECHNICAL REFERENCE
Refer to additional information and warnings on pages 2, 7-13, 117 and 128. If you have any questions about the suitability of a hose for a particular service, contact HBD Industries Customer Service Department, 800/438-2312, for a recommendation.
The most commonly used chemicals, materials, oil, solvents, etc., are listed here. Ratings are for concentrated or saturated solutions at room temperature (70F) unless otherwise specified. The rating code indicates the degree or range of serviceability for each style of hose listed under the group headings.
RATING CODE:
A Excellent. Suitable for continuous service. B Good. Generally suitable for continuous
service and for intermittent service.
1. Anhydrous Ammonia Hose Only 2. FDA T ube Required 3. Use Butane-Propane Hose Only 4. (See HCL 37%) 5. Contact HBD Technical
As a guide to the user of hose in contact with oil, the oil resistance classes and corresponding description are listed.
119
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
TECHNICAL REFERENCE
120
CROSSLINKED POLYETHYLENE
CROSSLINKED POLYETHYLENE
EPICHLOROHYDRIN
EPICHLOROHYDRIN
NATURAL RUBBER
NATURAL RUBBER
NEOPRENE*
NEOPRENE
HYPALON
HYPALON
NITRILE
NITRILE
UHMW
Acetal Acetaldehyde Acetamide Acetate Solvents Acetic Acid, 10% Acetic Acid, 30% Acetic Acid, 50% Acetic Acid, Glacial Acetic Anhydride Acetic Ester (Ethyl Acetate) Acetic Ether (Ethyl Acetate) Acetic Oxide (Acetic Anhydride) Acetone Acetophenone Acetyl Acetone Acetyl Chloride Acetylene Acrylonitrile Air Alcohols, Aliphatic Alcohols, Aromatic Alk-Tri (Trichloroethylene) Allyl Alcohol Allyl Bromide Allyl Chloride Alum (Ammonium) Potassium Sulfate) Aluminum Acetate Aluminum Chloride Aluminum Fluoride Aluminum Hydroxide Aluminum Phosphate Aluminum Nitrate Aluminum Sulfate Ammonia, Anhydrous Ammonia, Liquid Ammonia, in Water Ammonia, Gas (Cold) Ammonia, Gas (150F) Ammonium Carbonate Ammonium Chloride Ammonium Hydroxide Ammonium Metaphosphate Ammonium Nitrate Ammonium Nitrite Ammonium Persulfate Ammonium Phosphate Ammonium Sulfate Ammonium Sulfide
C C C C D D D D D D D D B C D D A B A A C D A D D A A A A A A A B A B B
C D C D D D D D D D D D B D D D A D A B D D B D D A
B A A C B B B B B B B C A A B C A D A A D D A D D A
D D B D D B C D D D D D D D D D A D A A C D A D D A
C C B D C C C C D D D D C D D D C D A A C D A D D A
C C B D B B D D B D C B C D D D C D A A D D A D D A
C A A C B B B D B B B B A A A C B D A A D D A D D A
D D C D B C C D D D D D D D D D B D A A B B A D B A
D D B D C C D D D D D D D D D B A D A C A A B B B A
B A A A A A B B B A A A A B A B A B A A A D A B B A
B A A A A A B B A A B A A A A C A A A A A A A A A A A A A A A
B A A A A A B B B A A A A B A B A B A A A D A B B A A A A A A A A A A A 1 1 A A A A A A A A A A
A A B A B A A A A A
A A A A A A A A
Ammonium Sulfite Ammonium Thiocyanate Ammonium Thiosulfate Amyl Acetate Amyl Acetone Amyl Alcohol Amylamine Amyl Borate Amyl Chloride Amyl Chloronapthalene Amyl Napthalene Amyl Oleate Amyl Phenol Anethole Aniline Aniline Dyes Aniline Hydrochloride Animal Fats Animal Grease Animal Oils Ansul Ether Antifreeze (Ethylene Glycol) Antimony Trichloride Antimony Pentachloride Aqua Regia Aromatic Hydrocarbons Arguad Arsenic Acid Arsenic Chloride Arsenic Trichloride Asphalt Astm #1 Oil Astm #2 Oil Astm #3 Oil Aviation Gasoline Barium Carbonate Barium Chloride Barium Hydroxide Barium Sulfate Barium Sulfide Beer Beet Sugar Liquors Benzaldehyde Benzene (Benzol) Benzene Sulfonic Acid Benzine Solvent (Ligroin) Benzoic Acid Benzoic Aldehyde Benzotrichloride
A A A C D A C D D D D D D D D C A D D D D A D D D D A A D D D D D D D A A A A A A D D D D B D D
A A A D D A B D D D D D D D D C C D D D D A D D D D A A D D D D D D D A A A A A A D D D D D D D
A A A D A A A A A A A A A B B A A A A A A A A B D A A A D D B A A A A A A A A A A A A A A A A B
A A A C A B C
D B
A B A A
B C A
A A A B A A A A A A C C
A D
UHMW
BUTYL
BUTYL
VITON
VITON
EPDM
EPDM
SBR
SBR
CPE
CPE
A A A D A A A A A A A A A B B A A A A A A A B B B A A A D D B A A A A A A A A A 2 A A A A A A A B
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
TECHNICAL REFERENCE
CROSSLINKED POLYETHYLENE
CROSSLINKED POLYETHYLENE
EPICHLOROHYDRIN
EPICHLOROHYDRIN
NATURAL RUBBER
NATURAL RUBBER
NEOPRENE
NEOPRENE
HYPALON
HYPALON
NITRILE
NITRILE
UHMW
Benzoyl Chloride Benzyl Acetate Benzyl Alcohol Benzyl Chloride Bichromate of Soda (Sodium Dichromate) Black Sulfate Liquor Blast Furnace Gas Bleach Solutions Borax Bordeaux Mixture Boric Acid Brandy Brine Bromine Bromine Water Bromobenzene Bunker Oil Butanol (Butyl Alcohol) Butadiene Butane Butter (Non F.D.A.) Butyl Acetate Butyl Acrylate Butylamine Butyl Benzene Butyl Bromide Butyl Butyrate Butyl Carbitol Butyl Cellosolve Butyl Chloride Butyl Ether Butyl Ethyl Acetaldehyde Butyl Ethyl Ether Butyl Oleate Butyl Phthalate Butyl Stearate Butyraldehyde Butyric Acid Butyric Anhydride Calcium Acetate Calcium Bisulfate Calcium Bisulfite Calcium Carbonate Calcium Chloride Calcium Hydroxide Calcium Hypochlorite Calcium Nitrate Calcium Sulfate
D D B D D B D D B B A
D D B D D B D D B B A
D B B C A
D D D D D
D D B D B
D B B D B
D B B D C
D D D D C
B D A A A
B A A A A
D A A D A
B A A A A A A B A A A 2 A D A C A A C 3 A A B A A B B A A B A A A A A A A A A A A A A A A B A A
Calcium Sulfide Calcium Sulfite Caliche Liquor (Crude Sodium Nitrate) Cane Sugar Liquors (Non F.D.A.) Carbitol Carbitol Acetate Carbolic Acid (Phenol) Carbon Bisulfide (See Carbon Disulfide) Carbon Dioxide Carbon Disulfide Carbonic Acid Carbon Monoxide Carbon Tetrachloride Carbon Tetrafluoride Castor Oil Caustic Potash (Potassium Hydroxide) Caustic Soda (Sodium Hydroxide) Cellosolve Cellulose Acetate Cellulube China Wood Oil (Tung Oil) Chlorine Dioxide Chlorine Gas (Dry) Chlorine, Water Solns. (2%) Chloroacetic Acid Chloroacetone Chlorobenzene Chlorobutane Chlorobutadiene Chloroform Chlorinated Hydrocarbons Chloropentane Chlorophenol Chloropropanone Chlorosulfonic Acid Chlorothene (Trichloroethane) Chlorotoluene Chromic Acid Citric Acid Coal Oil Coal Tar Coal Tar Naptha Cobalt Chloride Coconut Oil Cod Liver Oil
A A A A A A A A A A A A A A A A A A A A A A A A A A A C B A A A A A A A A D D D A D D D A A B B A B D D A B D C A B D C A B B C A C C D A A D A A A A A A A A A A A A
A D A A D D C A
A D A A D D D B
A D A A B D B A
A D A A C C A A
A D A A D D B B
A D A A D D C A
A D A A B D B A
A D A A D C A A
A A A A A A A C
A A A A C C A A
A C A A C
A C A A C C A A A A
A B A B B B A A C A A A D C C D D C C B D D D D D D D D D D D D D A D D D A D D D D D D D C D D D D D D D D D D D D D D D A D D D A D D B B B B D C C C B D D D D D D D C D D D D A D D D A B A B D D A D C D D D D D D D D D D D D D D D B A A C A A A A C D B D D D D D D D D D D C D D D D D D B B B C A B B B C D B C B B D B D D D D D D D D C D D A A D B D A B B B B A B D C C C D D D D D D D D C D D D C A D B D A A A B C D B D B C D D D D D D D C D D C C D C A B A C A A A C D C A A A A C D A A A A A A B D D A A A A A A A A A A A B A A B B A A A B B B B B A B A B B B A A A A A A A A A A B A A A B B A D D A D B C B B C B D B C A C B D A B C B B B A A A A A A A A A A A A A A A A
UHMW
BUTYL
BUTYL
VITON
VITON
EPDM
EPDM
SBR
SBR
CPE
CPE
121
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
TECHNICAL REFERENCE
122
CROSSLINKED POLYETHYLENE
CROSSLINKED POLYETHYLENE
EPICHLOROHYDRIN
EPICHLOROHYDRIN
NATURAL RUBBER
NATURAL RUBBER
NEOPRENE
NEOPRENE
HYPALON
HYPALON
NITRILE
NITRILE
UHMW
Coke Oven Gas Copper Arsenate Copper Chloride Copper Cyanide Copper Nitrate Copper Nitrite Copper Sulfate Copper Sulfide Corn Oil Cottonseed Oil Creosote (Wood) Creosote (Coal Tar) Cresols Cresylic Acid Crotonaldehyde Crude Oil Cumene Cupric Carbonate Cupric Chloride Cupric Nitrate Cupric Nitrite Cupric Sulfate Cyclohexane Cyclohexanone Cyclohexanol Cyclopentane P-Cymene DDT In Kerosene Decaline Decane Detergent Solutions Diacetone Alcohol Diamylamine Dibenzyl Ether Dibenzyl Sebacate Dibromobenzene Dibutylamine Dibutylether Dibutylphthalate Dibutyl Sebacate Dicalcium Phosphate Dichloroacetic Acid P-Dichlorobenzene Dichlorobutane Dichloroisopropyl Ether Dicyclohexylamine Dichlorodifluoromethane (Freon 12) Dichloroethane
D A A A A A C C D D D D D D D D D C C C C C D D D D D D D D B D B D C D B D D D A D D D D D D
D A A A A A A A D D D D D D D D D C C C C B D D D D D D D D B D C D D D C D D D A D D D D D D
C A A A A A A A B A D D D D A D D A A A A A D D D D D D D D A A A B B D C D B B A C D D C D D
D A A A A A A A A A B B C C D A C B A A A A B D B C C A D B A D B D D D B D D D A D D D D D A
D A A A A A A A B B C C C C D C C B B B B B D D B D D B D D B B A D D D A D D D A D D D D D B
B A A A A A A A B B C C C C D D D B A A A B D D D D D C D D A B C D D D C D D D A D D D D B D
D A A A A A A A B A D D D D C D D A A A A A D D D D D D D D A B C D B D B B A B A C D D C D D
C A A A A A A A A A B B C C D A C B B B B A B D B B B A D B A D B D D D B C D D A D D D D D B
A A A A A A A A A A A A A A D A A A A A A A A C B A A A A A A D B C B A D C D B A C A A C A A
A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B A A A B A A A A A B A
A A A A A A A A A
A A A C A A A A A C A C C A C A A A C
A A C B A B D C
A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B A A A B A A B A A B A
D D C D D D D D A A C C
Dichloroethylene Dichloroethyl Ether Dichlorohexane Dichloromethane Dichloropentane Dieldrin In Xylene Dieldrin In Xylene And Water Spray Diesel Oil Diethanolamine Diethylamine Diethyl Benzene Diethyl Ether Diethylene Dioxide Diethylene Glycol Diethylenetriamine Diethyl Oxa!ate Diethyl Phthalate Diethyl Sebacate Diethyl Sulfate Diethyl Triamine Dihydroxyethyl Amine Dihydroxyethyl Ether Diisobutylene Diisobutyl Ketone Diisodecyl Adipate Diisodecyl Phthalate Diisooctyl Adipate Diisooctyl Phthalate Diisopropanol Amine Diisopropyl Benzene Diisopropyl Ether Diisopropyl Ketone Dilauryl Ether Dimethylamine Dimethyl Benzene Dimethylaniline Dimethylformamide (DMF) Dimelhyl Ketone (Acetone) Dimethyl Phthalate Dimethyl Sulfate Dimethyl Sulfide Dinitrobenzene Dinitrotoluene Dioctyl Adipate (DOA) Dioctylamine Dioctyl Phthalate (DOP) Dioctyl Sebacate (DOS) Dioxane
D D D D D D D D B B D D D A B C D D D B B A D D D D D D B D D D D B D D C B D D D D D D B D D D
D D D D D D D D C C D D D A B D D D D C C A D D D D D D C D D D D C D D C C D D D D D D B D D D
C D D D D D D D B B D D B A A C A A B A A A D B A A A A A D D A D A D D C A A B C C D A A B B B
D D D D D D B A B B D B D A B D D D D B B A A D D D D D B C B D C B D D D D D D D D D D B D D D
D D D D D D B B B B D C D A C D D D D B B B B D D D D D D D D D D B D D C C D D D C D D D D D D
D D D D D D D C C C D D D A C D D D D C C A D D C C D C C D D D C C D D C C D D D D D D C D D D
D D D D D D D D C C D D B A A A C C B B B B D B A A A A A D D A D A D C C A B D D C D B B B B B
D D D D D D B A B B D D C A B D D D D B B A A D D D D D B C B D D B D D D D D D D D D D B B D D
A C A A A A A A B D A D D A C C C B A C C A A D C C C C C A B D C C A D D D C D C A B C C A B D
A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B A A A A B A A A A A A A
B C C C
A A B C A B A A A B B A A A C
A C A D C A A A B
C C C B
UHMW
BUTYL
BUTYL
VITON
VITON
EPDM
EPDM
SBR
SBR
CPE
CPE
D A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B A A A A B A A A A A A A
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
TECHNICAL REFERENCE
CROSSLINKED POLYETHYLENE
CROSSLINKED POLYETHYLENE
EPICHLOROHYDRIN
EPICHLOROHYDRIN
NATURAL RUBBER
NATURAL RUBBER
NEOPRENE
NEOPRENE
HYPALON
HYPALON
NITRILE
NITRILE
UHMW
Dioxolane Dipentene (Limonene) Diphenyl (Biphenyl) Diphenyl Oxide (Phenyl Ether) Dipropylene Glycol Dipropyl Ketone Dipropylamine Disodium Phosphate Divinyl Benzene D.M.P. (Dimethyl Phenols) Dodecyl Benzene Dodecyl Toluene Dowfume W 40, 100% Dow-Per (Perchloroethylene) Dowtherm Oil, A and E Dowtherm S.R.I. Dry Cleaning Fluids Epichlorohydrin Ethanol (Ethyl Alcohol) Ethanolamine Ethers Ethyl Acetate Ethyl Acetoacetate Ethyl Acrylate Ethyl Benzene Ethyl Benzoate Ethyl Butyl Alcohol Ethyl Butyl Amine Ethyl Butyl Ketone Ethyl Cellulose Ethyl Chloride Ethyl Dichloride Ethylene Ethylene Bromide Ethylene Chloride Ethylene Diamine Ethylene Dibromide Ethylene Dichloride Ethylene Glycol Ethylene Oxide Ethylene Trichloride (Trichloroethylene) Ethyl Ether Ethyl Formate Ethyl Hexanol Ethyl Methyl Ketone Ethyl Oxalate Ethyl Phthalate
D D D D A D B A D D D D D D D A D D A B D D D D D D A B D B C D D D D B D D A D D D D A C A D
D D D D A D B A D D D D D D D A D D A C D D D D D D A C D B C D D D D C D D A D D D D A D A D
C D D D A B A A D D D D D D D A D C A B C B B C D B A A B B D D D D D A D D A C D D B A B A A
D C D D A D B A D D D D D C D A C D A B D D D D C B A B D B C D A D D B D D A D C C D A D D D
D D D D A D B A D D D D C D D A D D A B D D D D D C A B D B C D B D D A D D A D D D D A D D D
D D D C A D C A D D D D C D C A D C A C C C D D D C A C D B D D C D D C D D A D D D D A D D D
B D D D A B A A D D D D C D D A D B A B D B B D D B A B B B D D D D D A D D A C D D C A B B B
D C D D A D B A D D D D D C D A C D A B D D D D C B A B D B B D A D D A D D A D C B D A D D D
C A A A A D C A A D A A C A A A A D C D C D D D A C B B D D A B A A A D B B A D A D D B D C C
A A A A A A A A A C A A B A A A B B A A A A A B A A A A A A A B A B B A B B A C B A A A A A A
B A B A A A A A C A B A A A D A A C A A B C A C A A B B A A A A A A B A A A B B C A A A A A C A A B C B A B B A A C B C B A A C C B A A A C A B D A A A A A
Ethyl Propyl Ether Ethyl Propyl Ketone Ethyl Silicate Ethyl Sulfate EX. TRI (Trichloroethylene) Fatty Acids Ferric Bromide Ferric Chloride Ferric Nitrate Ferric Sulfate Ferrous Acetate Ferrous Ammonium Sulfate Ferrous Chloride Ferrous Hydroxide Ferrous Sulfate Fish Oil Fluoroboric Acid Fluorine Fluosilicic Acid Formaldehyde (Formalin) Formamide Formic Acid Freon 11 Freon 12 Freon 13 Freon 21 Freon 22 Freon 31 Freon 32 Freon 112 Freon 113 Freon 114 Freon 115 Freon 142b Freon 152a Freon 218 Freon C316 Freon C318 Freon 13B1 Freon 114B2 Freon 502 Freon TF Freon T-WD602 Freon TMC Freon T-P35 Freon TA Freon TC Freon MF Freon BF Fuel Oil
D D C D D D A A A A D A A B A D A D B C A B D D A D D B A D C A A A A A A A A D A C C B A A D D D D
D D C D D D A A A A D A A C A D C D B C A B D D A D D B A D B A A A A A A A A C A B B C A A B B D D
D B A B D D A A A A A A A A A A A D A A A A D D A D A A A D D A A A A A A A A D A A A B A A A D D D
D D A D C B A A A A D A A B A A A D B B A C A B A D D D A B A A A A A A A A A B B A A B A A A A B A
D D A D D B A A A A D A A A A A B D B B A C B C A B A A A B A A A A A A A A A A A A B B A A A C B B
D D A D D B A A A A D A A B A A A D A B A C A D A D D B A B A A A A C A A A A A A A B B A A A B B C
D B A B D C A A A A B A A A A A A D B B A C D C A D A A A D D A A A A A A A A D A A B B A A B D D D
D D A D C A A A A A D A A A A A A D C B A C A A A B A D A B A A A A A A A A A B B A A B A A A A B A
C D A D A A A A A A D A A C A A C D A A D D A B A D D D C A B B B D D A A A A B B A A A A C A A A A
A A A A B A A A A A A A A A A A A D A A A B A B A A A A A A A A A A A A A A A A A A A A A A A A A A
A A C A A A A C B A A A A A A A A A A A A A A A A A A A A A D A A A A A B A B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A
UHMW
BUTYL
BUTYL
VITON
VITON
EPDM
EPDM
SBR
SBR
CPE
CPE
123
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
TECHNICAL REFERENCE
124
CROSSLINKED POLYETHYLENE
CROSSLINKED POLYETHYLENE
EPICHLOROHYDRIN
EPICHLOROHYDRIN
NATURAL RUBBER
NATURAL RUBBER
NEOPRENE
NEOPRENE
HYPALON
HYPALON
NITRILE
NITRILE
UHMW
Fuel, ASTM A Fuel, ASTM B Fuel, ASTM C Fumaric Acid Furan Furfural Furfuryl Alcohol Gallic Acid Gasoline, Reg Gasoline, Hi-Test Gasoline, Lead Free Gelatin Gluconic Acid Glucose Glue Glycerine (Glycerol) Glycols Grease Green Sulfate Liquor Halowax Oil Heptachlor in Petroleum Solvents Heptachlor in Petroleum Solvents, Water Spray Heptanal (Heptaldehyde) Heptane Heptane Carboxylic Acid Hexaldehyde Hexane Hexene Hexanol (Hexyl Alcohol) Hexylamine Hexylene Hexylene Glycol Hexyl Methyl Ketone Hi-Tri (Trichloroethylene) Hydraulic Fluid (Petroleum) Hydraulic Fluid (Phosphate Ester Base) Hydraulic Fluid (Poly Alkylene Glycol Base) Hydrobromic Acid Hydrochloric Acid, 37% Hydrochloric Acid, 50% Hydrochloric Acid, 100% Hydrocyanic Acid Hydrofluoric Acid Hydrofluosilic Acid Hydrogen Gas Hydrogen Peroxide, 3% Hydrogen Peroxide, 10%
D D D A D D D A D D D A D A A A A D A D D
D D D A D D D A D D D A D A A A A D A D D
D D D D C B C B D D D A C A A A A D A D D
A A B A D D D B A A B A C A A A A A A D B
A B C B D C C B A B B A C A A A A B B D B
C C D B D B C B C D D A B A A A A C A D D
D D D D C B C B D D D A C A A A A D A D D
A A B A D D D B A A A A C A A A A A A D B
A A A A D D D B A A A A A A A A A A B A A
A A B A A A A A A A A A A A A A A A A A A
A B C A A A A A B A A A A A A A A
A A B A A A A A A A A A A A A A A A A A A A
D D D B B D D B A A D D D D D D A B D A D D D D D D D D D D A C D A D D D D D D C B D D A B D A B D D A D A C D A B A B A A D C A D D A B B A B A B B A D D B D D B B C C C A C D A D D B D B D C B D D A B C A B D D A D A A D A B A B A A D C A D D A A D A A A D A A D A A D A A A A A A A A B A A B A A
C A A A A A A A A A A A A B A B A A C A C B A A
B B A A A A A A A A A A A A A B B B A B A D D B C C C D D B B D A A B C A B A A A C D C D D B D D A B D C C D D C C C A C C A A A B A A A A A C B B C C B B B B B C C D D D C D C A B C A A A C B B B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A
Hydrogen Peroxide, 30% Hydrogen Peroxide, 90% Hydrogen Sulfide Hydroquinone Hypochlorous Acid Ink Oil (Linseed Oil Base) Insulating Oil Iodine Iron Acetate Iron Hydroxide Iron Salts Iron Sulfate Iron Sulfide Isoamyl Acetate Isoamyl Alcohol Isoamyl Bromide Isoamyl Butyrate Isoamyl Chloride Isoamyl Ether Isoamyl Phthalate Isobutane Isobutanol (Isobutyl Alcohol) Isobutyl Acetate Isobutyl Aldehyde Isobutyl Amine Isobutyl Bromide Isobutyl Carbinol Isobutyl Chloride Isobutylene Isobutyl Ether Isocyanates Isooctane Isopentane Isopropyl Amine Isopropyl Acetate Isopropyl Alcohol (Iso-propanol) Isopropyl Amine Isopropyl Benzene Isopropyl Chloride Isopropyl Ether Isopropyl Toluene Jet Fuels (JP 1-JP 6) Kerosene Ketones Lactic Acid Lacquers Lacquer Solvents Lard Lauryl Alcohol
D D D B B D D D D C A A A D A D D D D D D A D C B D A D D D C D D B D A B D D D D D D B B D D D A
D D D B B D D D D C A A A D A D D D D D D A D D C D A D D D D D D C D A D D D D D D D B B D D D A
D D A B B B D D A A A A A A A D C C D A D A A B B D A D D D B D D A A A B D D D D D D B B D D D A
D D D D D B A D D B A A A D A D D D D D A A D D D D A D A D D A A B D A C D D C D A A D A D D A A
D D A D B B B D D A A A A D A D D D D D A A D D D D B D D D D A A A D A A D D D D B B D A D D B A
D D B C A B D C D B A A A D A D D D D D D A D D C D A D D D C B D C C A C D D C D C C D A D D D A
C C A B B B D D B B A A A B A D C D D B D A B B B D A D D D B D D B B B B D D D D D D B B D D C A
D D C D B A A D D B A A A D A D D D D D A A D D D D A D B D C A A B D A C D D C D A A D A D D A A
A B A D A A A C D C A A A D A B D B D C A A D D D B B B A D C A A D D B D A B D A A A D A D D A B
A B A A A A A A A A A A A A A B B B A A A A A A A B A B A A B A B A A B A A B A A A A A A A A A A
A A B A A A A A A A A A A A A A A A A A C A A B C B B C B A A C A A A A B A B A B A C B A A C B A A A B A A A B A B A A B A A B A A A A A A A A A A
C C A C A C
A A
UHMW
BUTYL
BUTYL
VITON
VITON
EPDM
EPDM
SBR
SBR
CPE
CPE
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
TECHNICAL REFERENCE
CROSSLINKED POLYETHYLENE
CROSSLINKED POLYETHYLENE
EPICHLOROHYDRIN
EPICHLOROHYDRIN
NATURAL RUBBER
NATURAL RUBBER
NEOPRENE
NEOPRENE
HYPALON
HYPALON
NITRILE
NITRILE
UHMW
Lead Acetate Lead Nitrate Lead Sulfamate Lead Sulfate Ligroin Lime Water Linseed Oil Lindol (Tricresyl Phosphate) Liquid Soap Liquified Petroleum Gas Lubricating Oils Lye (Sodium Hydroxide) Magnesium Acetate Magnesium Carbonate Magnesium Chloride Magnesium Hydrate Magnesium Hydroxide Magnesium Nitrate Magnesium Sulfate Malathion 50 in Armomatic Solvents Malathion 50 in Aromatic Solvents, Water Spray Maleic Acid Maleic Anhydride Malic Acid Manganese Sulfate Manganese Sulfide Manganese Sulfite Mercuric Chloride Mercury Methane Methyl Acetate Methyl Acrylate Methacrylic Acid Methyl Alcohol (Methanol) Methyl Benzene (Toluene) Methyl Bromide Methyl Butyl Ketone Methyl Cellosolve Methyl Chloride Methyl Cyclohexane Methylene Bromide Methylene Chloride Methyl Ethyl Ketone (MEK) Methyl Formate Methyl Hexanol Methyl Hexyl Ketone Methyl Isobutyl Carbinol Methyl Isobutyl Ketone (MIBK)
D A B A D D D D A D D A D A A A A A A D
D A B A D D D D A D D B D A A B A A A D
A A A A D A A A A D D A A A A A A A A D
C A B A A C A D A A A B D A A B A A A C
C A A A A A B D A B B A D A A A A A A C
D A B A D A B B A B C A D A A B A A A D
B A A A D A B A A D D A B A B A B A A D
B A B A A C A D A A A B D A A C A A A D
C A A A A A A A A A A D D A A B A A A A
A A A A A A A A A A A A A A A A A A A A
A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A A C B C B A B A A A A
D D D A A D D A A A D D A A C C B B D C C D A D D D D D D D D B C A D B D D D B A A A B B D D D D A D D D D D D D D D C A D C D C C D A A A B A D B B B A D B B B D D D D B B A B A B D D B A A A C A A D D D A D B D C C D D D D D A D B D C C C A B B C B B D C B A D D D B D D D D D B A D B D D D B A A A B A B D D C A D D D C D D D D D C A D B D C C D A B B C A D B B B A D B B B D D D D B B A B A B C C C A C C A A A D D D B D C D C C C D D D D A D C D A A A A A A A A A D D B C A A D D B B B B D C B D B D B A A A A A A A A A A A A A A A A B B B A A B A A A A
A A A A A A
A C C A B C C C
C A C
Methyl Isopropyl Ketone Methyl Propyl Ether Methyl Propyl Ketone Methyl Methacrylate Methyl Salicylate Mineral Oil Mineral Spirits Monochlorobenzene Monochlorodifluoromethane (Freon 22) Monoehanolamine Monomethylether Monovinyl Acetate Motor Oil Muriatic Acid Naphtha Napthalene Napthenic Acid Natural Gas Neatsfoot Oil Neu-Tri (Trichloroethylene) Nickel Acetate Nickel Chloride Nickel Nitrate Nickel Plating Solution Nickel Sulfate Niter Cake Nitric Acid,10% Nitric Acid, 20% Nitric Acid, 30% Nitric Acid, 30-70% Nitric Acid, Red Fuming Nitrobenzene Nitrogen Gas Nitrogen Tetraoxide Nitromethane Nitropropane Nitrous Oxide Octadecanoic Acid Octane Octanol (Octyl Alcohol) Octyl Acetate Octyl Amine Octyl Carbinol Octylene Glycol Oil, Petroleum Oil, Astm #1 Oil, Astm #2 Oil, Astm #3 Oleic Acid
D D D D D D D D D B B D D
D D D D D D D D D C B D D
B D B D B D D D A B A B D
D D D D D A A D D
D D D D D B B D A
D D D B D B D D D
B D B D B D D D A
D D D D D A A D A
D D D D C A A A D
A A A B B A A A A
C A A C A C B B A A A A A
D D D D D D D D D D D D A A A A A D D D D D D A D B C A D D B D C A A D D D D D D D D A A D A A D D D D D D A D B C A D D B D C A A D D D D D B D A A A B A A B B B C D D A D B A A B D B A B A A D D D A B
A A A A A A A A A A 4 A A A A A A A A 5 A A A B C B A A A A A A A A A A A A A A A A A A A A A A A B C B C D C D D D A C A A A A D D A A A A A A A A A A A B A B A A A A C A A B A A A A A A A A A A A A A A A A A A A A A A
UHMW
BUTYL
BUTYL
VITON
VITON
EPDM
EPDM
SBR
SBR
CPE
CPE
125
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
TECHNICAL REFERENCE
126
CROSSLINKED POLYETHYLENE
CROSSLINKED POLYETHYLENE
EPICHLOROHYDRIN
EPICHLOROHYDRIN
NATURAL RUBBER
NATURAL RUBBER
NEOPRENE
NEOPRENE
HYPALON
HYPALON
NITRILE
NITRILE
UHMW
Oleum (Fuming Sulfuric Acid) Olive Oil (Non F.D.A.) Orthodichlorobenzene Oxalic Acid Oxygen, Cold Oxygen, Hot Ozone Paint Thinner (Duco) Palmitic Acid Palm Oil Papermakers Alum Paradichlorobenzene Paraffin Paraformaldehyde Peanut Oil Pentane Perchloroethylene Perchloric Acid Petrolatum Petroleum, Crude Petroleum Ether (Naphtha) Petroleum Oils Phenol Phenolsulfonic Acid Phenyl Chloride Phenylhydrazine Phorone Phosphate Esters Phosphoric Acid, 10% Phosphoric Acid, 10-85% Phosphorous Trichloride Pickling Solution Picric Acid, Molten Picric Acid, Water Soln. Pinene Pine Oil Piperidine Pitch Plating Solutions, Chrome Plating Solutions, Others Polyvinyl Acetate Emulsion (PVA) Polyethylene Glycol Polypropylene Glycol Potassium Acetate Potassium Bicarbonate Potassium Bisulfate Potassium Bisulfite Potassium Carbonate Potassium Chloride Potassium Chromate
D D D C B D D D D D A D D D D D D B D D D D C D D C D D A C D C C A D D D D D A C A A D A A A A A D
D D D C B D C D D D A D D D D D D B D D D D C D D D D D A C D C C C D D D D D A C A A D A A A A A D
D B D A A D B D B A A D D B C D D B D D D D B C D B A A A A A C C A D D D D A A A A A A A A A A A A
D A D C B D D D A A A D A B A A D D A A A A D D D D D D A C D C C B A C D B B B C A A D A A A A A D
D B D B B D B D B B A D A B B A D A A B A A C C D D D D A B D C C B D C D B B B B A A D A A A A A C
D B D B B D A D B B A D D B B B D A C D D C C D D C D D A A D C B A D D D C C C B A A D A A A A A C
D B D A B D A D B B A D D B D D D B D D D D C C D C B A A A A C C B D D D D A A A A A B A A A A A B
D B D C B D A D B A A D A B A A C C A A A A C C D D D D A C C C C B A C D B B B C A A D A A A A A C
D A A C A B A C A A A A A C A A A A A A A A A A A A C C A A A B C C A B D C A B C A A D A A A A A A
D A B A A A A A B A A B D A A A B A A A A A A B A A A A A A A A D A A A B A A A A A A A A A A A A B
D D A B B A A A A A A A B A A A D B A D A A A C A C B A A A A A A A A A B D A A A A A A A A A A D A B A B A B A A A A A A A A A A A A A A A A A A A A A A B
Potassium Cyanide Potassium Dichromate Potassium Hydrate Potassium Hydroxide Potassium Nitrate Potassium Permanganate Potassium Silicate Potassium Sulfate Potassium Sulfide Potassium Sulfite Producer Gas Propane Gas Propanediol Propyl Acetate Propyl Alcohol (Propanol) Propyl Aldehyde Propyl Chloride Propylene Diamine Propylene Dichloride Propylene Glycol Pydraul Hydraulic Fluids Pyranol Pyridine Pyroligneous Acid Pyrrole Rape Seed Oil Red Oil (Crude Oleic Acid) Richfield A Weed Killer, 100% Richfield B Weed Killer, 33% Rosin Oil Rotenone And Water Rum Sal Ammoniac (Ammonium Chloride) Salicylic Acid Salt Water (Sea Water) Sewage Silicate of Soda (Sodium Silicate) Silicate Esters Silicone Greases Silicone Oils Silver Nitrate Skelly Solvent Skydrol Hydraulic Fluids Soap Solutions Soda Ash (Sodium Carbonate) Soda, Caustic (Sodium Hydroxide) Soda, Lime Soda Niter (Sodium Nitrate)
A D A A A D A A A A D A D A C D B D A D D D C C D D D D D A A A A C A D A A A D D A A A
A A A A A A A A A A A A A A A A A A A 3 A A B A A A A C B A A B A A B A A A A A B A A B B A A A 2 A A A A A A A A A A A A A A A A A B A A A A A B A
A B A B B B A B C A A A A A A A A A A A A A A A
UHMW
BUTYL
BUTYL
VITON
VITON
EPDM
EPDM
SBR
SBR
CPE
CPE
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
TECHNICAL REFERENCE
CROSSLINKED POLYETHYLENE
CROSSLINKED POLYETHYLENE
EPICHLOROHYDRIN
EPICHLOROHYDRIN
NATURAL RUBBER
NATURAL RUBBER
NEOPRENE
NEOPRENE
HYPALON
HYPALON
NITRILE
NITRILE
UHMW
Sodium Acetate Sodium Aluminate Sodium Bicarbonate Sodium Bisulfate Sodium Bisulfite Sodium Borate Sodium Carbonate Sodium Chloride Sodium Chromate Sodium Cyanide Sodium Dichromate Sodium Fluoride Sodium Hydroxide Sodium Hypochlorite Sodium Metaphosphate Sodium Nitrate Sodium Nitrite Sodium Perborate Sodium Peroxide Sodium Phosphate Sodium Silicate Sodium Sulfate Sodium Sulfide Sodium Sulfite Sodium Thiosulfate Soybean Oil Stannic Chloride Stannic Sulfide Stannous Chloride Stannous Sulfide Steam, under 300F Steam, over 300F Stearic Acid Stoddards Solvent Styrene Sugar Solutions (Sucrose) (Non F.D.A.) Suifamic Acid Sulfite Liquors Sulfonic Acid Sulfur (Molten) Sulfur Chloride Sulfur Dioxide Sulfur Hexafluoride Sulfur Trioxide Sulfuric Acid, 25% Sulfuric Acid, 25-50% Sulfuric Acid, 50-93% Sulfuric Acid, Fuming Sulfurous Acid
D A A A A A A A D A D A A C A A A C B A A A A A A D A A A A
D A A A A A A A D A D A B D A A A D B A A A A A A D A A A A
A A A A A A A A A A A A A B A A A A A A A A A A A B B A A A
D D D A C B D D D C A D B B D D B
D D D A C B D D D C A D B D D D C
B D D A A A D B D B A B B A C D B
A A A A A A A A B A A A A B A A A A B A A A A A A A A A A A
A A A A A A A A A A A A A A A A A
A A A A A A A A A A A
A A A A A A A A B A A A A B A A A A B A A A A A A A A A A A
A A A A A D C D A A A A A B D B A A B A A A D A A A A B D B A A B A A A A C A D D A A
Tall Oil Tallow Tannic Acid Tar Tartaric Acid Terpineol Tertiary Butyl Alcohol Tetrachlorobenzene Tetrachloroethane Tetrachloroethylene Tetraethylene Glycol Tetrachloromethane Tetrachloronapthalene Tetraethyl Lead Tetrahydrofuran (THF) Thionyl Chloride Tin Chloride Tin Tetrachloride Titanium Tetrachloride Toluene (Toluol) Toluene Diisocyanate (TDI) Toxaphene Transformer Oils (Petroleum Base) Transformer Oils (Chlorinated Phenyl Base Askerels) Transmission Fluids, A Transmission Fluids, B Tricetin Tributyl Amine Tributyl Phosphate Trichlorobenzene Trichloroethane Trichloroethylene Trichloropropane Tricresyl Phosphate (TCP) Triethanolamine (TEA) Triethylamine Triethylene Glycol Trinitrotoluene (TNT) Triphenyl Phosphate Trisodium Phosphate Tung Oil Turbine Oil Turpentine 2, 4D With 10% Fuel Oil Ucon Hydrolube Oils Undecanol Unsymmetrical DimethylHydrazine (UDMH)
D D A D A D A D D D A D D D D D A A D D C D D
D D B D A D A D D D A D D D D D A A D D C D D
D D A D B C A D D D A D D D D D A A D D A D D
A A C B B D A D D D A C D B D D A A B D C B A
B A B B B D A D D D A D D C D D A A C D D B B
B D B D A D A D D D A D D D D D A A C D D D B
D D A D A C A D D D A D D D D D A A C D A D D
B A C B B D A D D D A D D C D D A A C D C B A
A A A A A A A B A A A A B A D B A A A A B A A
A A A D A B A B B B A B B A A A A A A A A A A
A A A A D C
C A A C C
D D D D D D D D A B A B D D A B D D D D D D B B A D D A D D D D D A D D D B B D D D D D D B B A D D A D D D D D A D D D A A B D D D D A A B A D A A C D D D A A A B C B B D D D C D D B B A D D A A B B A A A D C D B B D D D D D D A A A B C A B B B A B A D D D B C D D D D D D A A A B C A B B D D D A A D D A A B D D D D B B B A D B A D D D D A A A A C B B D D D C D D B B A D D A A A A A A A D A A D D D B A A A B D B A B C A A A A A A B D A A A A A B A B A A A A A D A A A A A A A A C A A A A A B A D A A A A A D A A A A A A A A C
A C D C C C A A A A
A A B
UHMW
BUTYL
BUTYL
VITON
VITON
EPDM
EPDM
SBR
SBR
CPE
CPE
A A A D A B A B B B A B B A A A A A A A A A A
127
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
TECHNICAL REFERENCE
128
CROSSLINKED POLYETHYLENE
WARNING
HBD/Thermoid, Inc. recommends a hose product for its normal service as outlined in the price pages and our catalogs. Other applications should be referred to your respective marketing representative.
UHMW
EPICHLOROHYDRIN
NATURAL RUBBER
NEOPRENE
HYPALON
NITRILE
BUTYL
VITON
EPDM
Uran Urea Varnish Vegetable Oils Versilube Vinegar Vinyl Acetate Vinyl Benzene Vinyl Chloride (Monomer) Vinyl Ether Vinyl Toluene Vinyl Trichloride V.M.&P. Naptha Water, Fresh (Non F.D.A.) Water, Salt Whiskey, Wines White Liquor White Oil Wood Alcohol (Methanol) Xylene (Xylol) Xylidine Zeolites Zinc Acetate Zinc Carbonate Zinc Chloride Zinc Chromate Zinc Sulfate
B A D D C A D D C D D D D A A A D A D D B C A A A A
C C D D C C D D D D D D D A A A D A D D A D A A C A
A A A A A A B B A A B A A A A A A A C B A A A A B A
A A A A A A A A A A A D C B A A C B C A A A A A A A 2 A A A A A D C C B A A A A A D A B D A
In any application there may be an inherent risk of bodily injury or property damage and user is responsible for proper use and implementation of adequate safety precautions. It is the responsibility of the buyer to advise user of proper instructions for safe use and/or precautions, proper coupling procedure and to warn user of consequences of failure to heed such instruction. Should a hose assembly fail during use with pressure, injurious and/or damaging chemicals, elevated temperature materials, explosives, or flammable materials, then serious bodily injury or destruction of property could result from impelled couplings, whipping hose, high pressure or high velocity discharge, chemical contact, high temperature materials, explosion, or fire. In known high risk areas, it is recommended that hose inspections be performed at frequent intervals related to risk factor. Hose with obvious damage should be scrapped or tested before placing in use. These inspections should include tube condition, cover condition, leaking or slipped couplings, and proof test. We have attempted to list some of the standard references below. This is a limited list, for specific details see standard itself. 1. Federal Coast Guard Regulation on Dock Hose Federal Register 12-21-72, Vol. 37, No. 346, Part II, Section 154.500, 155.800, 156.170. 2. NFPA 196 Standard for Fire Hose. 3. NFPA 198 Care and Maintenance of Fire Hose. 4. NFPA 407 Care and Maintenance of Aircraft Refueling. 5. RMAStorage, Care, Maintenance. a. General b. OS&D c. LPG d. Aircraft Ground Refueling e. Motor Vehicle f. Anhydrous Ammonia g. Welding Hose h. Steam 6. RMAIndustry Hose Specs. a. Hydraulic Hose b. RMA-CGA Welding c. RMA-ANI Anhydrous Ammonia d. RMA-LPG e. OS&D f. 300, 400, 600# Fire Hose 7. ASTM-296 Fire Hose Spec.
SBR
WARNING
Listing of hose products for conveying materials as mentioned in these charts is provided as a guide only. Materials not described or those outside of described conditions should be referred to your respective marketing or technical representative. Blank spaces indicate unsatisfactory use. Many materials listed here should be recognized by the buyer as hazardous due to their acidic, caustic, flammable or explosive characteristics, and proper precautions must be employed to assure safe use. It is the users exclusive responsibility to develop appropriate techniques for the safe use of the hose product. Failure to take proper precautions could lead to serious bodily injury or property damage.
CAUTION
Product descriptions and specifications for products become dated. All product literature and information is subject to change, including the specifications outlined in this publication. For questions concerning any technical and/or product application information on the hose products contained in this catalog, please contact HBD/Thermoid, Inc. Customer Service Department at 800/543-8070 or log onto www.hbdthermoid.com.
CPE
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2
0.01562 0.03125 0.04688 0.06250 0.07812 0.09375 0.10938 0.12500 0.14062 0.15625 0.17188 0.18750 0.20312 0.21875 0.23438 0.25000 0.26562 0.28125 0.29688 0.31250 0.32812 0.34375 0.35938 0.37500 0.39062 0.40625 0.42186 0.43750 0.45312 0.46875 0.48438 0.50000
0.397 0.794 1.191 1.588 1.864 2.381 2.778 3.175 3.572 3.968 4.365 4.753 5.159 5.556 5.953 6.350 6.747 7.144 7.541 7.938 8.334 8.731 9.128 9.525 9.922 10.309 10.716 11.113 11.509 11.908 12.303 12.700
33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1
0.51582 0.53125 0.54688 0.56250 0.57812 0.59375 0.60938 0.62500 0.64062 0.65625 0.67188 0.68750 0.70312 0.71875 0.73438 0.75000 0.76562 0.78125 0.79688 0.81250 0.82812 0.84375 0.85938 0.87500 0.89062 0.90625 0.92188 0.93750 0.95312 0.96875 0.98438 1.00000
13.097 13.494 13.891 14.288 14.684 15.081 15.478 15.875 16.272 16.669 17.066 17.463 17.859 18.256 18.653 19.050 19.447 19.844 20.241 20.638 21.034 21.431 21.823 22.225 22.622 23.019 23.415 23.813 24.209 24.605 25.003 25.400
129
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
CONVERSION FACTORS
To Convert Atmospheres atmospheres atmospheres atmospheres atmospheres atmospheres Bar bar bar bar Barrels Oil BT Units BTUs BTUs BTUs BTUs BTU/Min BTU/min BTU/min BTU/min Centimeters cm cm Cms Mercury cms mercury cms mercury cms mercury cms mercury Cms/Second cms/sec cms/sec cms/sec cms/sec cms/sec Cms/Sec/Sec Cubic Cms cu cms cu cms cu cms cu cms cu cms cu cms cu cms Into cms of mercury ft.of water (at 4C) In of mercury (at 0C) kgs/sq cm kgs/sq meter pounds/sq in newtons/sq m atmospheres at (tech.) psi gals/oil kgcalories ftlbs hphrs kgmeters kwhrs ftlb/sec hp kw watts inches meters mm atm ft water kgs/sq meter lbs/sq ft lbs/sq in ft/min ft/sec km/hr meter/min miles/hr miles/min ft/sec/sec cu ft cu in cu meters cu yards gals liters pints (liq) quarts (liq) Multiply By 76.0 33.90 29.92 1.0333 10.332 14.70 105 0.9869 1.0197 14.504 42 0.2520 777.9 3.927 x 10-4 107.5 2.928 x 10-4 12.86 0.02356 0.01757 17.57 0.3937 0.01 10 0.01316 0.4461 136.0 27.85 0.1934 1.969 0.03281 0.036 0.6 0.02237 3.728 x 10-4 0.03281 3.531 3.102 106 1.308 2.642 10-3 2.113 1.057 x 10-5 x 10-2 x 10-6 x 10-4 x 10-3 x 10-3 To Convert Cubic Feet cu ft cu ft cu ft cu ft cu ft cu ft cu ft Cubic Ft/min cu ft/min cu ft/min cu ft/min cu ft/sec Cubic Inches cu ins cu ins cu ins cu ins cu ins cu ins cu ins Cubic Meters cu M cu M cu M cu M cu M cu M cu M Cubic Yards cu yds cu yds cu yds cu yds Decimeters Degrees (Angle) degs (angle) degs (angle) Into cubic cms cu inches cu meters cu yards gals liters pints (liq) quarts (liq) cu cms/sec gals/sec liters/sec lbs water/min gals/min cc cu ft cu meters cu yards gals liters pints (liq) quarts (liq) cc cu ft cu inches cu yards gals liters pints (liq) quarts (liq) cu cms cu ft cu ins cu meters gals meters minutes radians secs Multiply By 2.832 x 104 1728 0.02832 0.03704 7.48052 28.32 59.84 29.92 472.0 0.1247 0.4720 62.43 448.831 16.39 5.787 x 10-4 1.639 x 10-5 2.143 x 10-5 4.329 x 10-3 1.639 x 10-2 0.03463 0.01732 104 35.31 61.023 1.308 264.2 103 2113 1057 7.646 x 105 27 46,656 0.7645 202.0 0.1 60 0.01745 3600
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
CONVERSION FACTORS
To Convert Degrees/Sec degs/sec degs/sec Feet ft ft ft Ft of Water ft of w ft of w ft of w ft of w Feet/Min ft/min ft/min ft/min ft/min Ft/Sec/Sec ft/sec/sec FtPounds ft lbs ft lbs ft lbs ft lbs Ftlbs/Min ftlbs/min ftlbs/min ftlbs/min ft-lbs/min Ftlbs/Sec ftlbs/sec ftlbs/sec ftlbs/sec Gallons gals gals gals gals gals gals Gallons, Imp gallons, US Gallons/Min gal/min gal/min Into radians/sec revs/min revs.sec cms ins meters yds atms ins mercury kgs/sq cm lbs/sq ft lbs/sq in cm/sec ft/sec kms/hr meters/min miles/hr cms/sec/sec Meters/sec/sec BTUs hp-hrs kgcalories kgmeters kwhrs BTUs/min ftlbs/sec hp kgcalories/min kws BTUs/min hp kgcalories/min kws ccs cu ft cu ins cu meters liters pints (liq) quarts (liq) US gals Imp gals cu ft/sec liters/sec cu ft/hr Multiply By 0.01745 0.1667 0.002778 30.48 12 0.3048 1/3 0.02850 0.8826 0.03048 62.32 0.4328 0.5080 0.01667 0.01829 0.3048 0.01136 30.48 0.3048 1.286 x 5.050 x 3.241 x 0.1383 3.766 x 10-3 10-7 10-4 10-7 To Convert HorsePower hp hp hp hp hp hp HpHours hphrs hphrs hphrs hphrs Inches Ins Mercury ins mercury ins mercury ins mercury ins mercury Ins of Water ins of w ins of w ins of w ins of w Kilograms kgs kgs kgs Kgs/Sq Cm kgs/sq cm kgs/sq cm kgs/sq cm kgs/sq cm Kilometers kms kms kms Kms/Hr kms/hr kms/hr kms/hr kms/hr Kms/Hr/Sec kms/hr/sec kms/hr/sec Into BTUs/min ftlbs/min ftlbs/sec hp (metric) kgcalories/min kws watts BTUs ftlbs kgcalories kgmeters kwhrs cms atms ft water kgs/sq cm lbs/sq ft lbs/sq in atms ft mercury kgs/sq cm lbs/sq ft lbs/sq in dynes lbs ton (short) grams atms ft water ins mercury lbs/sq ft lbs/sq in cms ft meters miles cms/sec ft/min ft/sec meters/min miles/hr cms/sec/sec ft/sec/sec meters/sec/sec Multiply By 42.44 33,000 550 1.014 10.70 0.7457 745.7 2547 1.98 x 108 641.7 2.737 x 105 0.7457 2.540 0.002458 1.133 0.03453 70.73 0.4912 0.002458 0.07355 0.002540 5.202 0.03613 980,665 2.205 1.102 x 10-3 1000 0.9678 32.81 28.96 2048 14.22 105 3281 103 0.6214 27.78 54.68 0.9113 16.87 0.6214 27.78 0.9113 0.2778
7.717 x 10-2 0.01667 3.030 x 10-5 3.241 x 10-3 2.260 x 10-5 7.717 1.818 1.945 1.356 x x x x 10-2 10-3 10-2 10-3
3785 0.1337 231 3.785 x 10-3 3.785 8 4 1.20095 0.83267 2.225 x 10-3 0.06308 8.0208
131
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
CONVERSION FACTORS
To Convert Kilowatts kws kws kws kws kws Kilowatts-Hrs kw-hrs kw-hrs kw-hrs kw-hrs Liters liters liters liters liters liters Liters/Min Meters meters meters meters meters meters/min meters/min meters/min meters/min meters/min Meters/Sec meters/sec meters/sec meters/sec meters/sec meters/sec Micron microns Miles/Hr miles/hr miles/hr miles/hr miles/hr Millimeters mms Minutes (Angle) Into BTUs/min ft-lbs/min ft-lbs/sec hp kg-calories/min watts BTUs ft-lbs hp-hours kg-calories kg-meters ccs cu ft cu ins cu meters gals quarts (liq) gals/sec cms ft ins kms mms cms/sec ft/min ft/sec kms/hr miles/hr ft/min ft/sec kms/hr kms/min miles/hr miles/min meters in cms/sec ft/min ft/sec kms/hr meters/min cms ins radians Multiply By 56.92 4.425 x 104 737.6 1.341 14.34 103 3415 2.655 x 106 1.341 860.5 3.671 x 105 103 0.03531 51.02 10-2 0.2642 1.057 4.403 x 10-3 Pounds/Cu In 100 3.281 39.37 103 103 1.667 3.281 0.05468 0.06 0.03728 196.8 3281 3.6 0.06 2.237 0.03728 10-8 39 x 10-6 44.70 88 1.467 1.609 26.82 0.1 0.0397 2.909 x 10-4 Pounds/Sq In lbs/sq in lbs/sq in lbs/sq in Radians Tons (Long) tons (long) tons (long) Tons (Short) tons (short) tons (short) tons (short) Watts watts watts watts watts watts Watts/Hours watts/hours watts/hours watts/hours watts/hours watts/hours lbs/cu ft atms ft water in mercury kgs/sq cm degrees kgs lbs tons (short) kgs kps tons (long) tons (metric) BTUs/min ft-lbs/min ft-lbs/sec hp kg-calories/min kws BTUs ft-lbs hp-hrs kg-calories kg-meters kw-hrs 1728 0.06804 2.311 2.036 0.07031 57.29578 1016 2240 1.12000 2000 907.18486 0.89287 0.90718 0.05682 44.26 0.7376 1.341 x 10-3 0.01434 10 3.415 2655 1.341 x 10-3 0.8605 367.1 10-3 To Convert Newton Ounces ozs Ounces (Fluid) ozs (fluid) Pounds lbs lbs lbs Lbs of Water lbs of water lbs of water Lbs of Water/Min Pounds/Cu Ft Into kgs lbs gram cu in liters ozs tons (short) newtons (N) gram cu ft cu in gals cu ft/sec lbs/cu in Multiply By 0.1020 1.805 28.349527 1.805 0.02957 16 0.005 4.44 453.5924 0.01605 27.73 0.1204 2.679 x 10-4 5.787 x 10-4
800/543-8070
Fax 800/423-4354
Hose information is subject to change. For full details, visit our website or contact Customer Service.
TEMPERATURE CONVERSION
Look up reading in middle column (shaded). If in degrees Centigrade, read Farenheit equivalent in right-hand column; if in Farenheit degrees, read Centigrade equivalent in left-hand column. F = (C x 1.8) +32 C = (F - 32) x .5556 C C C C -51 -46 -40 -34 -29 -23 -17.8 -17.2 -16.7 -16.1 -15.6 -15.0 -14.4 -13.9 -13.3 -12.8 -12.2 -11.7 -11.1 -10.6 -10.0 -9.4 -8.9 -8.3 -7.8 -7.2 -6.7 -6.1 -5.6 -5.0 -4.4 -3.9 -3.3 -2.8 -2.2 -1.7 -1.1 -.6 0 F F -76 -58 -40 -22 -4 14 32 33.8 35.6 37.4 39.2 41.0 42.8 44.6 45.4 48.2 50.0 51.8 53.6 55.4 57.2 59.0 60.8 62.6 64.4 66.2 68.0 69.8 71.6 73.4 75.2 77.0 78.8 80.6 82.4 84.2 86.0 87.7 89.6 C .6 1.1 1.7 2.2 2.8 3.3 3.9 4.4 5.0 5.6 6.1 6.7 7.2 7.8 8.3 8.9 9.4 10.0 10.6 11.1 11.7 12.2 12.8 13.3 13.9 14.4 15.0 15.6 16.1 16.7 17.2 17.8 18.3 18.9 19.4 20.0 20.6 21.1 21.7 F F 91.4 93.2 95.0 96.8 98.6 100.4 102.2 104.0 105.6 107.6 109.4 111.2 113.0 114.8 116.6 118.4 120.2 122.0 123.8 125.6 127.4 129.2 131.0 132.8 134.8 136.4 138.2 140.0 141.8 143.6 145.4 147.2 149.0 150.8 152.6 154.4 156.2 158.0 159.8 43 49 54 60 66 71 77 82 110 120 130 140 150 160 170 180 230 248 266 284 302 320 338 356 C 22.2 22.8 23.3 23.9 24.4 25.0 25.6 26.1 26.7 27.2 27.8 28.3 28.9 29.4 30.0 30.6 31.1 31.7 32.2 32.8 33.3 33.9 34.4 35.0 35.6 36.1 36.7 37.2 37.8 F F 161.6 163.4 165.2 167.0 168.8 170.6 172.4 174.2 176.0 177.8 179.6 181.4 183.2 185.0 186.8 188.6 190.4 192.2 194.0 195.8 197.6 199.4 201.2 203.0 204.8 206.6 208.4 210.2 212.0
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
133
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
CONTROLLING TERMS
All sales are expressly limited to, and the rights and liabilities of the parties shall be governed exclusively by, the terms and conditions herein. In the event any purchase order or offer from Buyer states terms additional to or different from those set forth herein, this document shall be deemed a notice of objection to such additional or different terms and a rejection thereof. Any acknowledgment or shipment of product by Seller to Buyer subsequent to Sellers receipt of a purchase order or offer from Buyer shall not be deemed to be an acceptance by Seller of an offer to contract on the basis of any Buyers terms and conditions. Receipt and acceptance by Buyer of products shall be conclusive evidence of Buyers acceptance of the terms and conditions set forth herein as the sole controlling terms and conditions of the contract between Seller and Buyer. Stenographic and clerical errors by Seller are subject to correction.
LIMITATION OF LIABILITY
Buyers exclusive remedy on any claim of any kind for any loss or damage arising out of, connected with, or resulting from this contract, or from the performance or breach thereof, or from the design, manufacture, sale, delivery, resale or repair or use of any products covered by or furnished under the contract, including but not limited to any claim for breach of warranty, negligence, strict liability or other tort, shall be the repair or replacement, F.O.B. Sellers factory, as Seller may elect, of the product or part thereof giving rise to such claim, except that Sellers liability for such repair or replacement shall in no event exceed the contract price allocable to the products or part thereof which give rise to the claim. SELLER SHALL IN NO EVENT BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
ACCEPTANCE OF ORDERS
Seller possesses the exclusive right to accept or refuse any and all orders. No bid, offer, or quotation shall be valid or binding upon Seller, and no order shall be accepted and no sale shall be final, until such bid, offer, quotation, order or sale shall be acknowledged in writing by Seller. See price pages for minimum order amount.
PRICES
All prices are subject to change without notice and shall be adjusted to the Sellers prices in effect on the date of shipment. Prices reflect standard packaging for domestic shipment only. All prices are in U.S. Dollars.
RETURN OF MATERIAL
Sellers permission must be obtained in writing before any products are returned to it by Buyer. If products are returned without such permission, Buyer authorizes Seller, in addition to such other remedies as it may have, to hold the returned products at Buyers sole risk and expense. All returns must be freight prepaid by Buyer. Seller will in no event accept the return of any product that upon return is in the opinion of Seller altered, damaged, used, or in other than first class salable condition.
DELIVERY
Delivery dates are estimates and not a guarantee of a particular day of delivery and are based on the prompt receipt of all necessary information from the Buyer. Seller shall not be liable for failure or delay in shipping goods hereunder if such failure or delay is due to an act of God, fire, flood, war, labor difficulties, accident, strikes, lockouts, civil disorders, governmental priorities or embargoes, inability or difficulty in obtaining raw materials or supplies at customary terms and prices or any other causes or failure of presumed conditions of any kind whatsoever which are either beyond the reasonable control of the Seller or which would make impracticable the fulfillment of Sellers obligations hereunder. Buyer shall not refuse to accept deliveries so delayed. Seller shall be compensated for any and all extra costs and expenses occasioned by delays attributable to Buyer.
PATENTS
Buyer agrees to indemnify, defend and hold harmless Seller from any claims, cost, expense or loss and any judgments or decrees resulting from infringement of patents, copyrights, trademarks or other rights of others arising from or based upon Sellers compliance with Buyers designs, specifications or instructions in the furnishing of such products to Buyer.
STOPPAGE IN TRANSIT
If Seller determines that Buyers credit position has changed materially, prior to or during shipment, or at any time before acceptance of the goods by Buyer, then Seller may stop delivery of goods to the carrier or other bailees, or goods in the possession of a carrier or other bailee. Such action by Seller will not constitute a breach of this agreement with any resulting damages to Buyer.
PAYMENT
All invoices are due net 30 days from date of invoice. Payments not made when due shall bear interest at the prime rate plus 2 12% per annum or, if lower, the highest rate legally permissible, until paid. Credit balances will be applied against future purchases only and must be claimed within one year of creation or are waived.
CANCELLATION OR MODIFICATION
Buyer may not cancel or modify any order, either in whole or in part, without Sellers prior written consent and then only upon payment to Seller for all applicable costs incurred by Seller, including, without limitation, costs of purchased materials, and a reasonable allowance for profit. Order changes or additions received after original order has been processed will be treated as a new order.
TAXES
Any taxes which Seller may be required to pay or collect with respect to the sale, delivery or storage of the products, including taxes upon or measured by the receipts from the sales thereof, shall be for the account of Buyer who shall promptly pay the amount thereof to Seller upon demand, or in lieu thereof, furnish Seller with a tax exemption certificate acceptable to the taxing authorities.
CAUTION: USE OF DAMAGED HOSE OR MISAPPLICATION MAY RESULT IN PROPERTY DAMAGE OR SERIOUS PERSONAL INJURY. INSPECT HOSE REGULARLY.
800/543-8070
Fax 800/423-4354
www.hbdthermoid.com
Hose information is subject to change. For full details, visit our website or contact Customer Service.
AIR/MULTIPURPOSE
AUTOMOTIVE
MARINE
CHEMICAL
PETROLEUM LP Gas
STEAM
WATER WELDING
SPECIAL APPLICATIONS
HBD Industries, Inc. is made up of ten subsidiary and affiliate manufacturing companies. These include:
HBD/Thermoid, Inc. Budding Strips, Coated Rubber Fabrics, Conveyor Belting, Ducting, Hose, V-Belts, Rubber Bands and Roll Coverings Phone: 800/543-8070 California Drop Forge, Inc. Closed Die Forgings and Precision Components Phone: 323/221-1134 Hydro Carbide, Inc. Carbide Pre-forms, Rods and Blanks Phone: 800/245-2476 Ohio Electric Motors, Inc. DC Motors Phone: 828/626-2901 Ohio Magnetics, Inc. Magnetic Lifting and Separation Equipment Phone: 800/486-6446 Peerless Electric AC and DC Motors Phone: 800/676-3651 Peerless Blowers Fans/Blowers Phone: 800/613-4766 Peerless-Winsmith, Inc. Speed Reducers, Standard and Custom Gear Drives Phone: 716/592-9310 Perfection Gear, Inc. Swing, Rotation and Custom Drives Phone: 828/253-0000 Powertec Industrial Motors, Inc. Brushless Motors and Drives Phone: 803/328-1888
For complete details on all products manufactured by HBD Industries, Inc. companies, visit us at
www.hbdindustries.com 135
AIR/MULTIPURPOSE AUTOMOTIVE/MARINE COOLANT CHEMICAL DOCK LOADING FOOD INDUSTRY MATERIAL HANDLING PETROLEUM/LPG SPECIAL APPLICATIONS STEAM WATER/FIRE WELDING
DISTRIBUTED BY:
Sales/Customer Service
800/543-8070 800/423-4354 Fax 800/362-3101 Ohio Only
www.hbdthermoid.com www.hbdindustries.com
E-Mail: info@hbdthermoid.com HBD/ Thermoid... Leadership Through Creative Thinking and Technology!
HBD/THB/O/S-19542/12-05 Printed in U.S.A.