Académique Documents
Professionnel Documents
Culture Documents
Table of Contents
Table of Contents
C-pump, Standard Motor......................................................................................................................2 Product description.............................................................................................................................2 Motor rating and performance curves..............................................................................................5 C-pump, Premium Efficiency Motor (IE3)............................................................................................7 Product description.............................................................................................................................7 Motor rating and performance curves...........................................................................................10 D-pump.................................................................................................................................................11 Product description..........................................................................................................................11 Motor rating and performance curves...........................................................................................14 F-pump..................................................................................................................................................16 Product description..........................................................................................................................16 Motor rating and performance curves...........................................................................................18 G-pump.................................................................................................................................................20 Product description..........................................................................................................................20 Motor rating and performance curves...........................................................................................22 M-pump.................................................................................................................................................24 Product description..........................................................................................................................24 Motor rating and performance curves...........................................................................................26 N-pump, Standard Motor...................................................................................................................28 Product description..........................................................................................................................28 Motor rating and performance curves 3085.183/.092.................................................................31 Motor rating and performance curves 3085.160/.190.................................................................33 N-pump, Premium Efficiency Motor (IE3).........................................................................................37 Product description..........................................................................................................................37 Motor rating and performance curves 3085.800/.810.................................................................40 Motor rating and performance curves 3085.820/.830.................................................................41 Motor rating and performance curves 3085.900/.910.................................................................42 Dimensions and Weight, C-pump.....................................................................................................43 Drawings............................................................................................................................................43 Dimensions and Weight, D-pump.....................................................................................................48 Drawings............................................................................................................................................48 Dimensions and Weight, F-pump......................................................................................................50 Drawings............................................................................................................................................50 Dimensions and Weight, G-pump.....................................................................................................52 Drawings............................................................................................................................................52 Dimensions and Weight, M-pump.....................................................................................................53 Drawings............................................................................................................................................53 Dimensions and Weight, N-pump.....................................................................................................55 Drawings............................................................................................................................................55
Usage A submersible pump for wastewater containing solids or fibered material, clean water, or surface water. Denomination Type Cast iron Non explosion proof version 3085.183 Explosion proof version 3085.092 Pressure class MT Medium head Installation types F, P, S, T, Z
The pump can be used in the following installations: F Free standing semi permanent, wet well arrangement where the pump is placed on a firm surface. P Semi permanent, wet well arrangement with pump installed on two guide bars with automatic connection to discharge. S Portable semi permanent, wet well arrangement with hose coupling or flange for connection to discharge pipeline. T Vertical permanent, dry well arrangement with flange connection to suction and discharge piping. Z Horizontal permanent, dry well arrangement with flange connection to suction and discharge piping. Application limits Feature Liquid temperature Liquid temperature, warm water version Depth of immersion pH of the pumped liquid Liquid density Description Maximum 40C, (104F) Maximum 70C, (158F) Maximum 20 m (65 ft) 5.5 14 Maximum 1100 kg/m3
Motor data Feature Motor type Frequency Power supply Starting method Description Squirrel-cage induction motor 50 Hz 1-phase or 3-phase Direct on-line Star-delta Soft starter Variable Frequency Drive (VFD)
Number of starts per hour Code compliance Rated output variation Voltage variation Voltage imbalance between phases Stator insulation class Cables Application
Maximum 30 IEC 60034-1 10% Continuously running: Maximum 5% Intermittent running: Maximum 10% Maximum 2% H (180C, 356F)
Type Flygt SUBCAB - a heavy duty 4 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 10 mm2 with unscreened control cores. Flygt SUBCAB - a heavy duty 7 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 7G6 mm2 with unscreened control cores. Screened Flygt SUBCAB - a heavy duty 4 screened cores motor power cable with four twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature.
Y/D start
Materials
Table 1: Major parts except mechanical seals
Denomination Major castings Pump housing Impeller, alternative 1 Impeller, alternative 2 Wear ring Lifting handle Shaft Screws and nuts O-rings, alternative 1 O-rings, alternative 2 Oil, part no 901752
Material Cast iron, gray Cast iron, gray Cast iron, gray Cast iron, gray Bronze Stainless steel Stainless steel Stainless steel, A4 Nitrile rubber (NBR) 70 IRH Fluorinated rubber (FPM) 70 IRH Medical white oil of paraffin type. Fulfills FDA 172.878 (a)
ASTM 35B 35B 35B 30B C924 AISI 316L AISI 431 AISI 316L, 316, 316Ti -
Alternative 1
Outer seal Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide Silicon carbide/ Silicon carbide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
2 3
Carbon/ Aluminum oxide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
Surface treatment Priming Painted with a primer, see internal standard M0700.00.0002 Finish Navy gray color NCS 5804-B07G. Two-component highsolid top coating, see internal standard M0700.00.0004 for standard painting and M0700.00.0008 for special painting.
Options Accessories Discharge connections, adapters, hose connections, and other mechanical accessories. Electrical accessories such as pump controller, control panels, starters, monitoring relays, cables. Warm liquid version (non-explosion proof versions) Leakage sensor in the stator housing (FLS) Leakage sensor in the oil housing (CLS) Surface treatment (Epoxy) Zinc anodes Other cables
WS005001A
Rated power, kW
Rated power, Curve/Impeller Revolutio hp No ns per minute, rpm 1,2 1,2 1,2 1,3 1,3 1,3 1,7 1,7 1,7 1,7 1,9 632 634 636 436 438 440 434 436 438 440 434 940 940 940 1455 1455 1455 1440 1440 1440 1440 1435
Power factor, cos 0,65 0,65 0,65 0,6 0,6 0,6 0,68 0,68 0,68 0,68 0,7
Installati on
2,9 2,9 2,9 3,2 3,2 3,2 3,6 3,6 3,6 3,6 3,7
11 11 11 23 23 23 23 23 23 23 23
F,P,S F,P,S F,P,S T,Z T,Z T,Z F,P,S F,P,S F,P,S F,P,S T,Z
Rated power, Curve/Impeller Revolutio hp No ns per minute, rpm 1,9 1,9 1,9 2,7 2,7 2,7 2,7 2,7 436 438 440 432 434 436 438 440 1435 1435 1435 1400 1400 1400 1400 1400
Rated current, Starting A current, A 3,7 3,7 3,7 4,8 4,8 4,8 4,8 4,8 23 23 23 23 23 23 23 23
Power factor, cos 0,7 0,7 0,7 0,8 0,8 0,8 0,8 0,8
Rated power, kW
Rated power, Curve/Impeller Revolutio hp No ns per minute, rpm 1,3 1,3 1,3 2 2 2 2 436 438 440 434 436 438 440 1410 1410 1410 1425 1425 1425 1425
Power factor, cos 0,86 0,86 0,86 0,9 0,9 0,9 0,9
Installati on
28 28 28 43 43 43 43
Usage A submersible pump for wastewater containing solids or fibered material, clean water, or surface water. Denomination Type Cast iron Non explosion proof version 3085.800 Explosion proof version 3085.810 Pressure class MT Medium head Installation types F, P, S, T, Z
The pump can be used in the following installations: F Free standing semi permanent, wet well arrangement where the pump is placed on a firm surface. P Semi permanent, wet well arrangement with pump installed on two guide bars with automatic connection to discharge. S Portable semi permanent, wet well arrangement with hose coupling or flange for connection to discharge pipeline. T Vertical permanent, dry well arrangement with flange connection to suction and discharge piping. Z Horizontal permanent, dry well arrangement with flange connection to suction and discharge piping. Application limits Feature Liquid temperature Depth of immersion pH of the pumped liquid Liquid density Description Maximum 40C, (104F) Maximum 20 m (65 ft) 5.5 14 Maximum 1100 kg/m3
Motor data Feature Motor type Frequency Power supply Starting method Description Line started permanent magnet motor (LSPM) 50 Hz 1-phase or 3-phase Direct on-line Star-delta Soft starter Variable Frequency Drive (VFD)
Number of starts per hour Code compliance Rated output variation Voltage variation Voltage imbalance between phases Stator insulation class Cables Application
Maximum 30 IEC 60034-1 10% Continuously running: Maximum 5% Intermittent running: Maximum 10% Maximum 2% H (180C, 356F)
Type Flygt SUBCAB - a heavy duty 4 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 10 mm2 with unscreened control cores. Flygt SUBCAB - a heavy duty 7 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 7G6 mm2 with unscreened control cores. Screened Flygt SUBCAB - a heavy duty 4 screened cores motor power cable with four twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature.
Y/D start
Materials
Table 5: Major parts except mechanical seals
Denomination Major castings Pump housing Impeller, alternative 1 Impeller, alternative 2 Wear ring Lifting handle Shaft Screws and nuts O-rings, alternative 1 O-rings, alternative 2 Oil, part no 901752
Material Cast iron, gray Cast iron, gray Cast iron, gray Cast iron, gray Bronze Stainless steel Stainless steel Stainless steel, A4 Nitrile rubber (NBR) 70 IRH Fluorinated rubber (FPM) 70 IRH Medical white oil of paraffin type. Fulfills FDA 172.878 (a)
ASTM 35B 35B 35B 30B C924 AISI 316L AISI 431 AISI 316L, 316, 316Ti -
Alternative 1
Outer seal Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide Silicon carbide/ Silicon carbide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
2 3
Carbon/ Aluminum oxide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
Surface treatment Priming Painted with a primer, see internal standard M0700.00.0002 Finish Navy gray color NCS 5804-B07G. Two-component highsolid top coating, see internal standard M0700.00.0004 for standard painting and M0700.00.0008 for special painting.
Options Accessories Discharge connections, adapters, hose connections, and other mechanical accessories. Electrical accessories such as pump controller, control panels, starters, monitoring relays, cables. Leakage sensor in the stator housing (FLS) Leakage sensor in the oil housing (CLS) Surface treatment (Epoxy) Zinc anodes Other cables
436
438
MT
12
16
20
Q [l/s]
WS004982A
Revolutions per minute, rpm 1500 1500 1500 1500 1500 1500
Start current, Power factor, Installation A cos 23 23 23 23 23 23 0.82 0.82 0.82 0.87 0.87 0.87 F,P,S,T,Z F,P,S,T,Z F,P,S,T,Z F,P,S,T,Z F,P,S,T,Z F,P,S,T,Z
10
D-pump
D-pump
Product description
Usage A submersible pump, with vortex hydraulic, for liquids containing solids and abrasive media, or light wastewater. Denomination Type Cast iron Non explosion proof version 3085.183 Explosion proof version 3085.092 Pressure class MT Medium head HT High head Installation types P, S
The pump can be used in the following installations: P Semi permanent, wet well arrangement with pump installed on two guide bars with automatic connection to discharge. S Portable semi permanent, wet well arrangement with hose coupling or flange for connection to discharge pipeline. Application limits Feature Liquid temperature Liquid temperature, warm water version Depth of immersion pH of the pumped liquid Liquid density Motor data Feature Motor type Description Squirrel-cage induction motor Description Maximum 40C, (104F) Maximum 70C, (158F) Maximum 20 m (65 ft) 5.5 14 Maximum 1100 kg/m3
11
D-pump
Description 50 Hz 1-phase or 3-phase Direct on-line Star-delta Soft starter Variable Frequency Drive (VFD)
Number of starts per hour Code compliance Rated output variation Voltage variation Voltage imbalance between phases Stator insulation class Cables Application
Maximum 30 IEC 60034-1 10% Continuously running: Maximum 5% Intermittent running: Maximum 10% Maximum 2% H (180C, 356F)
Type Flygt SUBCAB - a heavy duty 4 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 10 mm2 with unscreened control cores. Flygt SUBCAB - a heavy duty 7 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 7G6 mm2 with unscreened control cores. Screened Flygt SUBCAB - a heavy duty 4 screened cores motor power cable with four twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature.
Y/D start
ASTM 35B
EN GJL-250
12
D-pump
Denomination Pump housing, alternative 1 Pump housing, alternative 2 Impeller, alternative 1 Impeller, alternative 2 Impeller, alternative 3 Lifting handle Shaft Screws and nuts O-rings, alternative 1 O-rings, alternative 2 Oil, part no 901752
Material Cast iron, gray Cast iron, gray, 45 HRC Cast iron, gray Cast iron, gray Cast iron, gray Stainless steel Stainless steel Stainless steel, A4 Nitrile rubber (NBR) 70 IRH Fluorinated rubber (FPM) 70 IRH Medical white oil of paraffin type. Fulfills FDA 172.878 (a)
ASTM 35B 35B 35B 30B 30B AISI 316L AISI 431 AISI 316L, 316, 316Ti -
Alternative 1
Outer seal Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide Silicon carbide/ Silicon carbide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
2 3
Carbon/ Aluminum oxide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
Surface treatment Priming Painted with a primer, see internal standard M0700.00.0002 Finish Navy gray color NCS 5804-B07G. Two-component highsolid top coating, see internal standard M0700.00.0004 for standard painting and M0700.00.0008 for special painting.
Options Accessories Discharge connections, adapters, hose connections, and other mechanical accessories. Electrical accessories such as pump controller, control panels, starters, monitoring relays, cables. Warm liquid version (non-explosion proof versions) Leakage sensor in the stator housing (FLS) Leakage sensor in the oil housing (CLS) Surface treatment (Epoxy) Other cables
13
D-pump
WS005003A
Rated power, kW
Rated power, Curve/ hp Impeller No 2,7 2,7 2,7 2,7 2,7 470 472 474 485 486
Revolutio Rated current, Starting ns per A current, A minute, rpm 1400 1400 1400 1400 1400 4,8 4,8 4,8 4,8 4,8 23 23 23 23 23
Installatio n
2 2 2 2 2
14
D-pump
Rated power, kW 2
Revolutio Rated current, Starting ns per A current, A minute, rpm 1400 4,8 23
Installatio n P,S
Rated power, kW
Revolutio Rated current, Starting ns per A current, A minute, rpm 1425 1425 1425 1425 9,4 9,4 9,4 9,4 43 43 43 43
Installatio n
WS005004A
Rated power, kW
Revolutio Rated current, Starting ns per A current, A minute, rpm 2845 2845 4,8 4,8 29 29
Installatio n
2,4 2,4
P,S P,S
15
F-pump
F-pump
Product description
Usage A submersible pump for liquid manure, or heavily contaminated sewage and sludge. The impeller is S-shaped and has a cutting function. Denomination Type Chopper Cast iron Non explosion proof version 3085.183 Explosion proof version 3085.092 Pressure class LT Low head Installation types P, S
The pump can be used in the following installations: P Semi permanent, wet well arrangement with pump installed on two guide bars with automatic connection to discharge. S Portable semi permanent, wet well arrangement with hose coupling or flange for connection to discharge pipeline. Application limits Feature Liquid temperature Liquid temperature, warm water version Depth of immersion pH of the pumped liquid Liquid density Motor data Feature Motor type Frequency Description Squirrel-cage induction motor 50 Hz Description Maximum 40C, (104F) Maximum 70C, (158F) Maximum 20 m (65 ft) 5.5 14 Maximum 1100 kg/m3
16
F-pump
Description 1-phase or 3-phase Direct on-line Star-delta Soft starter Variable Frequency Drive (VFD)
Number of starts per hour Code compliance Rated output variation Voltage variation Voltage imbalance between phases Stator insulation class Cables Application
Maximum 30 IEC 60034-1 10% Continuously running: Maximum 5% Intermittent running: Maximum 10% Maximum 2% H (180C, 356F)
Type Flygt SUBCAB - a heavy duty 4 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 10 mm2 with unscreened control cores. Flygt SUBCAB - a heavy duty 7 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 7G6 mm2 with unscreened control cores. Screened Flygt SUBCAB - a heavy duty 4 screened cores motor power cable with four twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature.
Y/D start
EN GJL-250 GJL-250
17
F-pump
Denomination Impeller Suction cover Lifting handle Shaft Screws and nuts O-rings, alternative 1 O-rings, alternative 2 Oil, part no 901752
Material Cast iron, nodular Cast iron, Hard-Iron Stainless steel Stainless steel Stainless steel, A4 Nitrile rubber (NBR) 70 IRH Fluorinated rubber (FPM) 70 IRH Medical white oil of paraffin type. Fulfills FDA 172.878 (a)
ASTM A 532 IIIA AISI 316L AISI 431 AISI 316L, 316, 316Ti -
Alternative 1
Outer seal Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide Silicon carbide/ Silicon carbide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
2 3
Carbon/ Aluminum oxide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
Surface treatment Priming Painted with a primer, see internal standard M0700.00.0002 Finish Navy gray color NCS 5804-B07G. Two-component highsolid top coating, see internal standard M0700.00.0004 for standard painting and M0700.00.0008 for special painting.
Options Accessories Discharge connections, adapters, hose connections, and other mechanical accessories. Electrical accessories such as pump controller, control panels, starters, monitoring relays, cables. Warm liquid version (non-explosion proof versions) Leakage sensor in the stator housing (FLS) Leakage sensor in the oil housing (CLS) Surface treatment (Epoxy) Zinc anodes Other cables
18
F-pump
LT
WS005005A
Rated power, kW
Rated power, Curve/ hp Impeller No 2,7 2,7 2,7 490 491 492
Revolutio Rated current, Starting ns per A current, A minute, rpm 1400 1400 1400 4,8 4,8 4,8 23 23 23
Installatio n
2 2 2
Rated power, kW
Revolutio Rated current, Starting ns per A current, A minute, rpm 1425 9,4 43
Installatio n
1,5
P,S
19
G-pump
G-pump
Product description
Usage A submersible pump designed for pumping ground water. Denomination Type Cast iron Non explosion proof version 3085.183 Explosion proof version 3085.092 Pressure class MT Medium head Installation types F
The pump can be used in the following installations: F Free standing semi permanent, wet well arrangement where the pump is placed on a firm surface. Application limits Feature Liquid temperature Depth of immersion pH of the pumped liquid Liquid density Motor data Feature Motor type Frequency Power supply Description Squirrel-cage induction motor 50 Hz 1-phase or 3-phase Description Maximum 40C, (104F) Maximum 20 m (65 ft) 5.5 14 Maximum 1100 kg/m3
20
G-pump
Description Direct on-line Star-delta Soft starter Variable Frequency Drive (VFD)
Number of starts per hour Code compliance Rated output variation Voltage variation Voltage imbalance between phases Stator insulation class Cables Application
Maximum 30 IEC 60034-1 10% Continuously running: Maximum 5% Intermittent running: Maximum 10% Maximum 2% H (180C, 356F)
Type Flygt SUBCAB - a heavy duty 4 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 10 mm2 with unscreened control cores. Flygt SUBCAB - a heavy duty 7 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 7G6 mm2 with unscreened control cores. Screened Flygt SUBCAB - a heavy duty 4 screened cores motor power cable with four twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature.
Y/D start
Material Cast iron, gray Cast iron, gray Cast iron, gray
21
G-pump
Denomination Strainer bottom Cutter plate Lifting handle Shaft Screws and nuts O-rings Oil, part no 901752
Material Stainless steel Steel, stainless steel Stainless steel Stainless steel Stainless steel, A4 Nitrile rubber (NBR) 70 IRH Medical white oil of paraffin type. Fulfills FDA 172.878 (a)
ASTM AISI 304 AISI 316L AISI 431 AISI 316L, 316, 316Ti -
Alternative 1
Outer seal Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide Silicon carbide/ Silicon carbide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
2 3
Carbon/ Aluminum oxide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
Surface treatment Priming Painted with a primer, see internal standard M0700.00.0002 Finish Navy gray color NCS 5804-B07G. Two-component highsolid top coating, see internal standard M0700.00.0004 for standard painting and M0700.00.0008 for special painting.
Options Accessories Discharge connections, adapters, hose connections, and other mechanical accessories. Electrical accessories such as pump controller, control panels, starters, monitoring relays, cables. Leakage sensor in the oil housing (CLS) Leakage sensor in the stator housing (FLS) Surface treatment (Epoxy) Other cables
22
G-pump
MT
WS005006A
Rated power, hp 1 1
Rated power, hp 1 1
Rated current, A 3 3
Starting current, A 13 13
23
M-pump
M-pump
Product description
Usage A submersible pump for wastewater containing solids that need to be macerated. The impeller is equipped with a grinder device. Denomination Type Cast iron Grinder Non explosion proof version 3085.172 Explosion proof version 3085.891 Pressure class HT High head Installation types F, H, P
The pump can be used in the following installations: F Free standing semi permanent, wet well arrangement where the pump is placed on a firm surface. H Semi permanent, wet well quick connection suspended arrangement, incorporating integral non-return valve. P Semi permanent, wet well arrangement with pump installed on two guide bars with automatic connection to discharge. Application limits Feature Liquid temperature Depth of immersion pH of the pumped liquid Liquid density Motor data Feature Motor type Frequency Description Squirrel-cage induction motor 50 Hz Description Maximum 40C, (104F) Maximum 20 m (65 ft) 5.5 14 Maximum 1100 kg/m3
24
M-pump
Description 1-phase or 3-phase Direct on-line Star-delta Soft starter Maximum 30 IEC 60034-1 10% Continuously running: Maximum 5% Intermittent running: Maximum 10% Maximum 2% H (180C, 356F)
Number of starts per hour Code compliance Rated output variation Voltage variation Voltage imbalance between phases Stator insulation class Cables Application
Type Flygt SUBCAB - a heavy duty 4 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 10 mm2 with unscreened control cores. Flygt SUBCAB - a heavy duty 7 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 7G6 mm2 with unscreened control cores.
Y/D start
Denomination Major castings Pump housing Impeller Cutter wheel Cutter plate Lifting handle Shaft
Material Cast iron, gray Cast iron, gray Cast iron, gray Cast iron, Hard-Iron Stainless steel Stainless steel
ASTM 35B 35B 30B A 532 IIIA AISI 316L AISI 431
25
M-pump
Material Stainless steel, A4 Nitrile rubber (NBR) 70 IRH Medical white oil of paraffin type. Fulfills FDA 172.878 (a)
EN 1.4401,1.4404, -
Alternative 1
Outer seal Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide Silicon carbide/ Silicon carbide
Finish Navy gray color NCS 5804-B07G. Two-component highsolid top coating, see internal standard M0700.00.0004 for standard painting and M0700.00.0008 for special painting.
Options Accessories Discharge connections, adapters, hose connections, and other mechanical accessories. Electrical accessories such as pump controller, control panels, starters, monitoring relays, cables. Leakage sensor in the stator housing (FLS) Leakage sensor in the oil housing (CLS) Surface treatment (Epoxy) Zinc anodes Other cables
26
M-pump
HT
WS005007A
Rated power, kW
Rated power, Curve/ hp Impeller No 3,2 3,2 3,2 3,2 2,4 2,4 250 253 254 259 254 259
Revolutio Rated current, Starting ns per A current, A minute, rpm 2845 2845 2845 2845 2890 2890 4,8 4,8 4,8 4,8 3,6 3,6 29 29 29 29 29 29
Installatio n
Rated power, kW
Revolutio Rated current, Starting ns per A current, A minute, rpm 2915 2915 12 12 61 61
Installatio n
1,9 1,9
F,H,P F,H,P
27
Usage A submersible pump for efficient pumping of clean water, surface water, and wastewater containing solids or long-fibered material. The pump is designed for sustained high efficiency. For abrasive media, Hard-Iron is required. Denomination Type Adaptive Non explosion proof version 3085.160 Explosion proof version 3085.190 Pressure class Installation types
F, P, S, T, Z MT Medium head SH Super head F, P, S, T, Z MT Medium head SH Super head MT Medium head F, P, S, T, Z
3085.183 Cast iron Curve 460, 461, 463, and 253256 Hard-Iron Curve 464, 465, 466 3085.183
3085.092
3085.092
The pump can be used in the following installations: F Free standing semi permanent, wet well arrangement where the pump is placed on a firm surface. P Semi permanent, wet well arrangement with pump installed on two guide bars with automatic connection to discharge. S Portable semi permanent, wet well arrangement with hose coupling or flange for connection to discharge pipeline. T Vertical permanent, dry well arrangement with flange connection to suction and discharge piping. Z Horizontal permanent, dry well arrangement with flange connection to suction and discharge piping.
28
Application limits Feature Liquid temperature Liquid temperature, warm water version Depth of immersion pH of the pumped liquid Liquid density Motor data Feature Motor type Frequency Power supply Starting method Description Squirrel-cage induction motor 50 Hz 1-phase or 3-phase Direct on-line Star-delta Soft starter Variable Frequency Drive (VFD) Description Maximum 40C, (104F) Maximum 70C, (158F) Maximum 20 m (65 ft) 5.5 14 Maximum 1100 kg/m3
Number of starts per hour Code compliance Rated output variation Voltage variation Voltage imbalance between phases Stator insulation class Cables Application
Maximum 30 IEC 60034-1 10% Continuously running: Maximum 5% Intermittent running: Maximum 10% Maximum 2% H (180C, 356F)
Type Flygt SUBCAB - a heavy duty 4 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 10 mm2 with unscreened control cores. Flygt SUBCAB - a heavy duty 7 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 7G6 mm2 with unscreened control cores.
Y/D start
29
Type Screened Flygt SUBCAB - a heavy duty 4 screened cores motor power cable with four twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature.
Denomination Major castings Pump housing Impeller, alternative 1 Impeller, alternative 2 Insert ring, alternative 1 Insert ring, alternative 2 Lifting handle Shaft Screws and nuts O-rings, alternative 1 O-rings, alternative 2 Oil, part no 901752
Material Cast iron, gray Cast iron, gray Cast iron, gray Cast iron, Hard-Iron Cast iron, gray Cast iron, Hard-Iron Stainless steel Stainless steel Stainless steel, A4 Nitrile rubber (NBR) 70 IRH Fluorinated rubber (FPM) 70 IRH Medical white oil of paraffin type. Fulfills FDA 172.878 (a)
ASTM 35B 35B 35B A 532 IIIA 35B A 532 IIIA AISI 316L AISI 431 AISI 316L, 316, 316Ti -
Alternative 1
Outer seal Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide Silicon carbide/ Silicon carbide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
2 3
Carbon/ Aluminum oxide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
Surface treatment Priming Painted with a primer, see internal standard M0700.00.0002 Finish Navy gray color NCS 5804-B07G. Two-component highsolid top coating, see internal standard M0700.00.0004 for standard painting and M0700.00.0008 for special painting.
30
Options Accessories Discharge connections, adapters, hose connections, and other mechanical accessories. Electrical accessories such as pump controller, control panels, starters, monitoring relays, cables. Warm liquid version (non-explosion proof versions) Leakage sensor in the stator housing (FLS) Leakage sensor in the oil housing (CLS) Surface treatment (Epoxy) Zinc anodes Other cables
MT 3~
10
4
460/464
461/465 463/466
0 0 5 10 15 20 25 30 35 Q [l/s]
WS005008A
Rated power, kW 1 1
Starting current, A 23 23
31
Rated power, kW 1,3 1,3 1,3 1,3 1,4 1,4 1,4 1,4 2 2 2 2 2 2
P2 [kW] 1.6 1.4 1.2 1.0 0.8 H [m]
Rated power, hp 1,7 1,7 1,7 1,7 1,9 1,9 1,9 1,9 2,7 2,7 2,7 2,7 2,7 2,7
Curve/ Impeller No 461 463 465 466 461 463 465 466 460 461 463 464 465 466
Revolutions per minute, rpm 1440 1440 1440 1440 1435 1435 1435 1435 1415 1415 1415 1415 1415 1415
Rated current, A 3,6 3,6 3,6 3,6 3,7 3,7 3,7 3,7 5,2 5,2 5,2 5,2 5,2 5,2
Starting current, A 23 23 23 23 23 23 23 23 27 27 27 27 27 27
Power factor, Installation cos 0,68 0,68 0,68 0,68 0,7 0,7 0,7 0,7 0,73 0,73 0,73 0,73 0,73 0,73 F,P,S F,P,S F,P,S F,P,S T,Z T,Z T,Z T,Z F,P,S F,P,S F,P,S F,P,S F,P,S F,P,S
461
463
MT 1~
7 6 5 4 3 2
463 461
1 0 0 5 10 15 20 25 30 Q [l/s]
WS005009A
Rated power, hp 2
Starting current, A 43
32
Rated power, hp 2
Starting current, A 43
253
2.0
254
1.5
255 256
H [m]
SH
24 20 16 12 8 4
255 256
253 254
0 0 4 8 12 16 20 Q [l/s]
WS005010A
Starting current, A 29 29 29 29
Power factor, Installation cos 0,9 0,9 0,9 0,9 P,S P,S P,S P,S
33
MT
P2 [kW] 2.5 2.0 1.5 1.0 H [m]
463 462 461 460
MT
10
4
462 463 461 460
0 0 5 10 15 20 25 30 35 Q [l/s]
WS005022A
Rated power, kW
Rated power, Curve/Impeller Revolutio hp No ns per minute, rpm 1,3 1,7 1,7 1,9 1,9 2,7 2,7 2,7 2,7 463 462 463 462 463 460 461 462 463 1455 1440 1440 1435 1435 1400 1400 1400 1400
Power factor, cos 0,6 0,68 0,68 0,7 0,7 0,8 0,8 0,8 0,8
Installati on
23 23 23 23 23 23 23 23 23
34
MT
10
15
20
25
30
Q [l/s]
WS004116A
Starting current, A 43 43
35
SH
P2 [kW] 2.5 2.0 1.5
255 256 253 254
H [m]
SH
24 20 16 12 8 4 0
253 254
255 256
12
16
20
Q [l/s]
WS004117A
Rated power, kW 2,4 2,4 2,4 2,4 2,4 2,4 2,4 2,4
Rated power, hp 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,2
Curve/ Impeller No 253 254 255 256 253 254 255 256
Revolutions per minute, rpm 2845 2845 2845 2845 2870 2870 2870 2870
Rated current, A 4,8 4,8 4,8 4,8 4,9 4,9 4,9 4,9
Starting current, A 29 29 29 29 34 34 34 34
Power factor, Installation cos 0,91 0,91 0,91 0,91 0,87 0,87 0,87 0,87 P,S P,S P,S P,S P,S P,S P,S P,S
36
Usage A submersible pump for efficient pumping of clean water, surface water, and wastewater containing solids or long-fibered material. The pump is designed for sustained high efficiency. For abrasive media, Hard-Iron is required. Denomination Type Adaptive Cast iron Hard-Iron Non explosion proof version 3085.900 3085.800 3085.820 Explosion proof version 3085.910 3085.810 3085.830 Pressure class MT Medium head MT Medium head MT Medium head Installation types F, P, S, T, Z F, P, S, T, Z F, P, S, T, Z
The pump can be used in the following installations: F Free standing semi permanent, wet well arrangement where the pump is placed on a firm surface. P Semi permanent, wet well arrangement with pump installed on two guide bars with automatic connection to discharge. S Portable semi permanent, wet well arrangement with hose coupling or flange for connection to discharge pipeline. T Vertical permanent, dry well arrangement with flange connection to suction and discharge piping. Z Horizontal permanent, dry well arrangement with flange connection to suction and discharge piping.
37
Application limits Feature Liquid temperature Depth of immersion pH of the pumped liquid Liquid density Motor data Feature Motor type Frequency Power supply Starting method Description Squirrel-cage induction motor 50 Hz 1-phase or 3-phase Direct on-line Star-delta Soft starter Variable Frequency Drive (VFD) Description Maximum 40C, (104F) Maximum 20 m (65 ft) 5.5 14 Maximum 1100 kg/m3
Number of starts per hour Code compliance Rated output variation Voltage variation Voltage imbalance between phases Stator insulation class Cables Application
Maximum 30 IEC 60034-1 10% Continuously running: Maximum 5% Intermittent running: Maximum 10% Maximum 2% H (180C, 356F)
Type Flygt SUBCAB - a heavy duty 4 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 10 mm2 with unscreened control cores. Flygt SUBCAB - a heavy duty 7 cores motor power cable with two twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature. Cables < 7G6 mm2 with unscreened control cores.
Y/D start
38
Type Screened Flygt SUBCAB - a heavy duty 4 screened cores motor power cable with four twisted pair screened control cores. Conductor insulation rating of 90C, which allows for increased current. Superior mechanical strength and high abrasion and tear resistant. Chemical resistant within pH 3-10 and ozone, oil, and flame resistant. Used up to 70C water temperature.
Denomination Major castings Pump housing Impeller, alternative 1 Impeller, alternative 2 Insert ring, alternative 1 Insert ring, alternative 2 Lifting handle Shaft Screws and nuts O-rings, alternative 1 O-rings, alternative 2 Oil, part no 901752
Material Cast iron, gray Cast iron, gray Cast iron, gray Cast iron, Hard-Iron Cast iron, gray Cast iron, Hard-Iron Stainless steel Stainless steel Stainless steel, A4 Nitrile rubber (NBR) 70 IRH Fluorinated rubber (FPM) 70 IRH Medical white oil of paraffin type. Fulfills FDA 172.878 (a)
ASTM 35B 35B 35B A 532 IIIA 35B A 532 IIIA AISI 316L AISI 431 AISI 316L, 316, 316Ti -
Alternative 1
Outer seal Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide Silicon carbide/ Silicon carbide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
2 3
Carbon/ Aluminum oxide Corrosion resistant cemented carbide/ Corrosion resistant cemented carbide
Surface treatment Priming Painted with a primer, see internal standard M0700.00.0002 Finish Navy gray color NCS 5804-B07G. Two-component highsolid top coating, see internal standard M0700.00.0004 for standard painting and M0700.00.0008 for special painting.
39
Options Accessories Discharge connections, adapters, hose connections, and other mechanical accessories. Electrical accessories such as pump controller, control panels, starters, monitoring relays, cables. Leakage sensor in the stator housing (FLS) Leakage sensor in the oil housing (CLS) Surface treatment (Epoxy) Zinc anodes Other cables
MT
10 8 6 4 2 0
462 463 461
10
15
20
25
30
35 Q [l/s]
WS004984A
Start current, Power factor, Installation A cos 23 23 23 0.82 0.82 0.87 P,S,T,Z F,P,S,T,Z P,S,T,Z
40
Rated power, kW 2 2
Start current, Power factor, Installation A cos 23 23 0.87 0.87 P,S,T,Z F,P,S,T,Z
MT
10 8 6 4 2 0
462 463 461
10
15
20
25
30
35 Q [l/s]
WS004986A
Start current, Power factor, Installation A cos 23 23 23 23 23 0.82 0.82 0.87 0.87 0.87 P,S,T,Z F,P,S,T,Z P,S,T,Z P,S,T,Z F,P,S,T,Z
41
MT
10 8 6 4 2 0
462 463 461
10
15
20
25
30
35 Q [l/s]
WS004988A
Start current, Power factor, Installation A cos 23 23 23 23 23 0.82 0.82 0.87 0.87 0.87 F,P,S,T,Z F,P,S,T,Z F,P,S,T,Z F,P,S,T,Z F,P,S,T,Z
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
Xylem |zlm|
1) The tissue in plants that brings water upward from the roots 2) A leading global water technology company We're 12,500 people unified in a common purpose: creating innovative solutions to meet our world's water needs. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. We move, treat, analyze, and return water to the environment, and we help people use water efficiently, in their homes, buildings, factories and farms. In more than 150 countries, we have strong, long-standing relationships with customers who know us for our powerful combination of leading product brands and applications expertise, backed by a legacy of innovation. For more information on how Xylem can help you, go to xyleminc.com
Xylem Water Solutions AB Gesllvgen 33 174 87 Sundbyberg Sweden Tel. +46-8-475 60 00 Fax +46-8-475 69 00 http://tpi.xyleminc.com
Visit our Web site for the latest version of this document and more information The original instruction is in English. All nonEnglish instructions are translations of the original instruction.
883448_2.0_en.US_2012-12_TS.3085_50Hz