Académique Documents
Professionnel Documents
Culture Documents
FEATURES
* Restart current (Typ. 100A) * Precision Fixed Operating Frequency * Overcurrent protection * Overvoltage protection * Undervoltage lockout * Built-in temperature protection * Built-in high voltage MOSFET * Auto restart mode
TO-220F-4L
ORDERING INFORMATION
Device SA482P67K65 SA482T67K65 Package DIP-8-300-2.54 TO-220F-4L
APPLICATIONS
* Switch power.
REV:1.4
2007.07.05 Page 1 of 7
SA482X67K65
BLOCK DIAGRAM
Rating 650 30 8.0 2.0 1.3 68 30 -0.3~ VSD 2.2 42 0.017 0.33 +160 -25~ +85 -55~+150
Darting
REV:1.4
2007.07.05 Page 2 of 7
SA482X67K65
To be continued
REV:1.4
2007.07.05 Page 3 of 7
SA482X67K65
(Continued)
Characteristics Protection Section Overvoltage Protection Overheat Protection Total Standby Current Start Current Supply Current (Control Part)
Min. 25 140
Typ. 27 160
Max. 29 --
Unit V C A mA
Istart Iop
VCC=14V
---
100 7
170 12
PIN CONFIGURATION
PIN DESRIPTION
Pin No. SA482P67K65 6 7 8 1 3 4 2 5 SA482T67K65 2 1 3 4 -Pin name Drain GND VCC FB NC Drain pins Ground. Power supply pin. Feedback input pin. Not connect. Pin descriptions
FUNCTION DESCRIPTIONS
SA482X67K65 is used for off-line SMPS with high voltage MOSFET and current mode PWM controller. The PWM controller integrates the fixed frequency oscillator, the undervoltage lockout, the overvoltage protection, the overcurrent protection, the temperature protection, and the leading edge blanking. SA482X67K65 need few external components, increasing the efficiency and system reliability, suited for a flyback converter or a forward converter.
REV:1.4
2007.07.05 Page 4 of 7
SA482X67K65
Note:The circuit and parameters are reference only, please set the parameters of the real application circuit based on the real test .
REV:1.4
2007.07.05 Page 5 of 7
SA482X67K65
PACKAGE OUTLINE
DIP-8-300-2.54
2.54
UNIT: mm
1.52 15 degree
0.5MIN
0.46
TO-220F-4L
3.400.10
UNIT: mm
6.500.10
15.600.20
10.300.30
13.600.20
15.700.20
REV:1.4
2007.07.05 Page 6 of 7