Académique Documents
Professionnel Documents
Culture Documents
Version: 1.0
Reprogramming module
If the module has not been installed, the following window appears:
The Renault electronic repair module instruction manuals are based on the technical specifications current when it was prepared. They may be modified as a result of updates to the electronic repair modules introduced by the manufacturer. Copying or translating, in part or in full, of this document is forbidden without the prior written consent of Renault s.a.s. All rights reserved by Renault s.a.s.
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Once the type of installation has been selected, accept the terms of the licence agreement:
Page 2 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Installation is complete:
1.2 Uninstallation
Uninstall the module using the shortcut in the Start Menu:
Confirm uninstallation:
Page 3 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
The status bar is used to obtain information about the session in progress (if available): - version of the module in use - vehicle model - VIN - type of computer
Page 4 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
2.3 Reprogramming
2.3.1 Home page
Page 5 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
2.3.2
Pre-reprogramming instructions
Carefully read the instructions relating to the operations that must be carried out before reprogramming. Only if these operations have been carried out, select "Oprations de pr-reprogrammation effectues" ("Prereprogramming operations carried out").
Otherwise, select "Oprations de pr-reprogrammation non effectues" ("Pre-reprogramming operations not carried out"). The following window appears.
Page 6 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
2.3.3
Carefully read the technical pre-requisites for use of the module. Click on "Valider" ("Confirm") if these pre-requisites have been met.
Page 7 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
2.3.4
Enter the VIN, the vehicle model and the computer to reprogram in the relevant fields and then click on "Interrogation des calculateurs" ("Interrogation of computers")
2.3.4.1
Troubleshooting
Page 8 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
If no J2534 sensor is connected, the following window is displayed. The same error occurs if several sensors are connected at the same time.
2.3.5
Page 9 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
2.3.5.1
Troubleshooting
The following messages are displayed: If the VIN read on the vehicle is different to the VIN entered on the previous screen, the correct VIN must be selected manually:
If the vehicle does not have a VIN, use of the VIN entered on the previous screen must be confirmed:
If it is impossible to communicate with the vehicle. Check that the sensor is working correctly.
Page 10 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
2.3.6
Page 11 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 12 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 13 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
2.3.6.1
Troubleshooting
The following messages are displayed: If the selected computer is up-to-date. Click on "Quittez l'application" ("Exit application")
Page 14 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
If the Renault server is unable to determine which file to use. Click on "Quittez l'application" ("Exit application") Click on "Imprimer" ("Print") to print (Note: only if a printer is configured)
Page 15 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Click on "Abandonner" ("Abandon") if you do not have a certificate. The following message is displayed. Click on "Quitter" ("Exit").
Click on "Suivant" ("Next") after having connected your certificate if you have one. The following message is displayed. Click on "OK".
Page 16 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Check that your workstation is configured correctly to access the Internet and that the Firewall is not preventing connection to the Renault server. Click on "Test connexion" ("Test connection") to try again. The following message is displayed:
Page 17 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
2.3.7
Page 18 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
If the battery voltage is within the permissible range, reprogramming may be started by selecting "Reprogrammer" ("Reprogram").
Page 19 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Wait until the end of the reprogramming procedure. Do not work on the vehicle during this operation.
Page 20 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
2.3.8
Post-reprogramming operations
Reprogramming is now complete. Carefully read the instructions relating to the operations that must be carried out after reprogramming. Click on "Quittez pour effectuer les oprations de post-reprogrammation" ("Exit to carry out the postreprogramming operations") and carry them out.
Page 21 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 22 / 23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
This screen is used to view all of the operations carried out using the module Click on "Prcdent" ("Previous") and "Suivant" ("Next") to navigate. Click on "Retour" ("Back") to return to the home page screen.
Page 23 / 23