Académique Documents
Professionnel Documents
Culture Documents
November 2010
Principal: Saudi Ethylene & Polyethylene Co. Dr. Laid Demdoum Project members:Kiwa Nederland B.V. Guus Setz, FransWeyn, Jan Braamhaar
Kiwa Nederland B.V. P.O. box 137, 7300 AC Apeldoorn, tel. 055 - 5 393 393
GDM/125091-9/SE/FW/V
CONTENTS:
Signed by the Senior Product Manager: Name: Guus Setz Date: 30-11-2010
Notes: The described test results are only valid for the tested materials and objects
2010, Kiwa Nederland B.V. in Apeldoorn, the Netherlands. All rights reserved. Publication of this report is allowed, provided nothing is added or omitted. For any deviation from these conditions and for publication in translated form written permission has to be obtained from Kiwa Nederland B.V.
GDM/125091-9/SE/BHR/V.
INTRODUCTION
The Saudi Ethylene & Polyethylene Co. in the Royal Kingdom of Saudi Arabia has given Kiwa Nederland B.V. (the former Kiwa Gastec Certification B.V.) in the Netherlands, accredited in accordance with the ISO/IEC 17025 document, an order to perform Mechanical testing and Physical analyses on the high density TASNEE 100 Black PE-pipe grade with Batch-number JH0347W03. The scope of these Mechanical tests and Physical analyses is covered by the present valid ISO/IEC 17025 accreditation of Kiwa Nederland B.V. in Apeldoorn in the Netherlands
The order has been given by Dr. Laid Demdoum, National Petrochemical Industrialization Marketing Co., Royal Kingdom of Saudi Arabia.
Direct contact persons in this project: Mr. Hafid Boufersaoui, Saudi Ethylene & Polyethylene Co. in the Royal Kingdom of Saudi Arabia. Mr. Guus Setz, Kiwa Nederland B.V. in the Royal Kingdom of the Netherlands. Mr. Werner Rothhft, intermediate contact person, Lyondell-Basell in the Republic of Germany.
Notes: The described test results are only valid for the tested materials and objects
GDM/125091-9/SE/BHR/V.
1.
PHYSICAL AND MECHANICAL PROPERTIES OF THE PIPE GRADE RESIN TASNEE 100 Black is a black high-density polyethylene pipe grade resin for pipes and fittings. A survey of physical and mechanical properties determined at Kiwa Nederland B.V. laboratories is given below.
Properties:
Test Methods
Units
Required value
Values measured
Smooth, clean, no scoring, no cavities or other surface defects. 930 20% of the nominated value, or 0.1 g/10min, whichever is the greatest. 350 300 2.0 to 2.5 3.0
Satisfactory
ISO 1183/3 ISO 4427 ISO 4437 ISO 1133 EN 1555 EN 12201 EN 12099 EN 12118 ISO 6964 ISO 18553 Appearance
kg/m3
(23C)
962 0.20
g/10 min.
Volatile Content Water Content Carbon Black Content Carbon Black Dispersion
mg/kg mg/kg % (mass fraction) Rating: not worse than micrograph B in Annex B min.
ISO 11357-6
> 20
hours
20.0
Fusion Compatibility, tensile strength for buttfusion on a 110 mm SDR11 pipe sample
ISO 4427 ISO 4437 EN12201 EN1555 ISO 13953 ISO 13477 ISO 4437 EN 1555-1
MPa
Test to failure, ductile = pass, brittle=fail Pc 1.5 x MOP with Pc = 3.6 x Pc,S4 + 2.6 (in bar)
Pass
Resistance to Rapid Crack Propagation, Pc,S4 testing on 110 mm SDR 11 pipe samples
bar/0C
GDM/125091-9/SE/BHR/V.
Resistance to Rapid Crack Propagation, Pc,S4 testing on 250 mm SDR 11 pipe samples
bar/0C
Resistance to Slow Crack Growth, SCG-Notch pipe testing on 110 mm SDR 11 pipe samples at 80C at 9.20 bar internal pressure. (3 pipe samples)
ISO 13479
hours
Hydrostatic Strength Control point tests at 20C on 32 mm SDR 11 pipe samples. (3 pipe samples) Hydrostatic Strength Control point tests at 80C on 32 mm SDR 11 pipe samples, (3 pipe samples) Hydrostatic Strength Control point tests at 80C on 32 mm SDR 11 pipe samples, (3 pipe samples)
ISO 4427 ISO 4437 ISO 1167 ISO 4427 ISO 4437 ISO 1167 ISO 4427 ISO 4437 ISO 1167
12.4 MPa
100 hours
5.4 MPa
165 hours
5.0 MPa
1000 hours
Progress Long-term (hydrostatic) strength determined at Kiwa Nederland B.V. laboratories on 32 mm SDR 11 pipe samples tested in at 3 test temperatures in a Water/Water environment, (20C, 60C and 80C) 50-Years ( LPL) at 20C (97.5%-LCL) 50-Years ( LTHS) at 20C (average) ISO 9080 (ISO12162) ISO 9080 MPa 10.0 10.516 (MRS10) MPa 10.824
N.a.* = Not applicable, based on the Volatile value of 142 mg/kg obtained.