Académique Documents
Professionnel Documents
Culture Documents
Features
s Typical power dissipation 90A 145 mW s Count frequency 42 MHz
Ordering Code:
Order Number DM7490AN Package Number N14A Package Description 14-Lead Plastic Dual-In-Line Package, JECEC MS-001, 0.300 Wide
Connection Diagram
Dual-In-Line Package
DS006533.prf
www.fairchildsemi.com
DM7490A
Function Tables
Count QD 0 1 2 3 4 5 6 7 8 9 L L L L L L L L H H
(Note 1)
Logic Diagram
BCD Bi-Quinary (5-2) (Note 3) Count QA 0 1 2 3 4 5 6 7 8 9 L L L L L H H H H H Outputs QD L L L L H L L L L H QC L L H H L L L H H L QB L H L H L L H L H L The J and K inputs shown without connection are for reference only and are functionally at a high level.
Reset/Count Function Table Reset Inputs R0(1) H H X X L L X R0(2) H H X L X X L R9(1) L X H X L X L R9(2) X L H L X L X QD L L H Outputs QC L L L QB L L L QA L L H
Note 1: H = High Level, L = Low Level, X = Dont Care. Note 2: Output QA is connected to input B for BCD count. Note 3: Output QD is connected to input A for bi-quinary count.
www.fairchildsemi.com
DM7490A
Note 4: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The Recommended Operating Conditions table will define the conditions for actual device operation. Note 5: TA = 25C and VCC = 5V.
DC Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted) Symbol Conditions Parameter VI VOH VOL II IIH Input Clamp Voltage High Level Output Voltage Low Level Output Voltage Input Current @ Max Input Voltage High Level Input Current IIL Low Level Input Current IOS ICC Short Circuit Output Current Supply Current
Note 6: All typicals are at VCC = 5V, TA = 25C. Note 7: QA outputs are tested at IOL = Max plus the limit value of IIL for the B input. This permits driving the B input while maintaining full fan-out capability. Note 8: Not more than one output should be shorted at a time. Note 9: ICC is measured with all outputs open, both RO inputs grounded following momentary connection to 4.5V, and all other inputs grounded.
Min
Typ (Note 6)
Max 1.5
Units V V
VCC = Min, II = 12 mA VCC = Min, IOH = Max VIL = Max, VIH = Min VCC = Min, IOL = Max VIH = Min, VIL = Max (Note 7) VCC = Max, VI = 5.5V VCC = Max VI = 2.7V VCC = Max VI = 0.4V VCC = Max (Note 8) VCC = Max (Note 9) A Reset B A Reset B DM54 DM74 -20 18 29 0.2 2.4 3.4
V mA
mA mA mA
www.fairchildsemi.com
DM7490A
www.fairchildsemi.com
14-Lead Plastic Dual-In-Line Package, JEDEC MS-001, 0.300 Wide Package Number N14A
LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user.
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.