Académique Documents
Professionnel Documents
Culture Documents
asp
2 advantage
1. 2. WECON LX series PLC and HMI,WECON operating interface,parameters setting is clean and intuitive, Easy to operate. Adopt high-precision cylinder to drive the lamination,stress can accurately adjusted according to need High-precision temperature control systemEnsure the stability of the temperature of the lamination. The module uses the right-angle side positioning vacuum adsorption,Easy to operate. The overall structure of the machine is user-friendly, easy to operate, safe operation, elegant appearance.
3.
4. 5.
3 engineering
http://www.we-con.com.cn/en/index.asp
http://www.we-con.com.cn/en/index.asp
Site
WECON LX2n-40MR
http://www.we-con.com.cn/en/index.asp
HMI---700L
4 control process
The device include two parts,from top to bottom is indenter volume plastic platform.the rear of the the volume plastic connect the constant speed motor,platform and indenter moves via the cylinder.two parts operate independently without disturbing. Running processes platform run inside to the specified
Fuzhou Wecon Co.Ltd. Fujian Province China.
http://www.we-con.com.cn/en/index.asp
location ,and then the indenter move downwards. When met the number of pressure motor of the volume plastic starts,volume plastic achieve setted length,motor stop, the time of crimping setted run out indenter move up,the platform move to the specified location.this series of actions including device is powered after an emergency stopback to starting point,CCD display switching etc.,controlled by the LX PLC. WECON HMI located in the upper right corner of the machine,can set crimping time ,volume plastic interval and length and display alarm message,the device have ther two modes of operation:Manual mode,Test Mode is also on the HMI.