Vous êtes sur la page 1sur 44

The durable, contemporary timber solution.

Internal

Cover photo: Guipuzcoan Football Federation Project: Izaskun Larzbal Photography: Susana Archaga and Luis M. Ambrs Parklex 2000, Eucalyptus

Indoor wood coverings.


The natural wood used to manufacture Parklex provides a look of quality and comfort for building interiors from the very first moment. With Parklex, ceilings, walls and floors, in addition to any other surface, such as counter tops, bathrooms and even showers take on a new leading role. If youre looking for quality and comfort, Parklex has a wide range of natural wood finishes that achieve both purposes. In addition, its variety of finishes allows decorators and architects to be creative with combinations on any type of surface, allowing them to decorate the floors, walls or ceiling in the same wood, providing the degree of quality and comfort that only natural, highquality materials can convey.

Floor, walls and ceiling.

The same colors and finishes throughout the interior.

Parklex paneling may be installed on any surface: floors, walls and ceilings, combining aesthetic elements or keeping the same colors and finishes throughout the interior, converting rooms into authentic enclosures, completely lined with natural wood panels.

Recommended products: Floors:

2000 3000
Walls and ceiling:
Dry areas:

500
Damp areas:

700

Quality at your feet.

Recommended products: Floors:

2000 3000

The quality of Parklex comes from the materials and processes used to manufacture them. This quality is demonstrated precisely where the product suffers the most wear: floors, transit spaces and areas of intensive use, where any material suffers a high level of wear. Parklex, however, performs at top levels in these areas, with its properties remaining unchanged. Simple maintenance is all that is needed to prolong the life of these coverings, which makes them immediately economical.

It demonstrates its quality where it suffers the most wear.

Silence: another form of comfort.

Recommended products: Walls and ceiling:

500

Noise and reverberation prevention is also a form of comfort. Parklex 500 is designed to be installed as an indoor wall and ceiling covering in locations with high acoustic absorption requirements: conference halls, presentation rooms, auditoriums, offices, etc., as well as furniture coverings. These panels insulate rooms from outside noise or that of nearby areas, providing an even greater feeling of comfort.

Coverings for locations with high acoustic absorption requirements.

Excellent fire behavior. Parklex means peace of mind.

Recommended products: Floors:

2000
Walls and ceiling:
Dry areas:

500
Damp areas:

In addition to being manufactured from natural wood, the entire Parklex line is tested according to the new European standard EN 13.501 regarding reaction to fire, obtaining the best results possible for organic materials. With Parklex, you are sure to make the right decision.

Natural wood with the best results for reaction to fire.

700

Bathrooms, gymnasiums, spas or pools: dont relinquish comfort.

Cozy, moisture resistant spaces.

Moisture is a factor that generally determines the materials used in bathrooms. Thanks to the production and treatment processes Parklex uses on natural wood, it is now possible to use Parklex coverings in any area of the bathroom, even in the shower, transforming them into areas that are just as inviting as the rest of the interior. The Parklex line stands out for its moisture resistance, which also allows its problem-free use in gymnasiums, spas or pools, making these areas (and any other space where appearance, hygiene, resistance and cleanliness are important) exclusive places that are both pleasant and totally unique.

Recommended products: Walls and ceiling:


Damp areas:

700
Floors (bathrooms and gymnasiums):

2000

Parklex Projects

Guggenheim Bilbao
Bilbao, Spain. Architect: Frank O. Gehry Project manager: Csar Caicoya Parklex 2000, Museum Ash

Bilbao, May 14, 2007

Bilbao, 14 de mayo de 2007

Dear Sirs: After ten years of intensive use, withstanding the regular heavy machinery traffic and the exposition of sculptures weighing many tons, we would like to express our satisfaction with the wood floors in the Guggenheim Museum galleries (Manufacturer: Composites Gurea, model Parklex 2000, lightened ash), with regards to both the ease of cleaning and their durability and strength.

Estimados Seores: Tras diez aos de funcionamiento intensivo de los suelos de madera en las Galeras del Museo Guggenheim (Fabricante Composites Gurea, modelo Parklex 2000, fresno clarificado), soportando el paso habitual de maquinaria pesada y la exposicin de esculturas de gran tonelaje, comunicamos nuestra satisfaccin con los mismos, tanto en su facilidad de limpieza como en su durabilidad y resistencia.

Rogelio Diez Maintenance and Installations Supervisor

Navarran Government Press Room


Pamplona, Spain. Architects: Javier Barcos Berruezo and Manolo Enrquez Jimnez Parklex 500, Walnut Parklex 2000, Walnut

Marqus de Riscal Hotel


The Luxury Collection. Alava, Spain. Architect: Frank O. Gehry Project manager: Csar Caicoya Parklex 500, Maple Parklex 2000, Maple

Cepa 21 Wineries
Valladolid, Spain. Architects: BSA Arquitectos Interior design: TGA+Asociados and Javier Machimbarrena Parklex 500, Maple

Burlada Cultural Center


Navarre, Spain. Architect: Miguel Ayate Bariain Parklex 500

Puerta de America Hotel


Madrid, Spain. Architect: Jean Nouvel Parklex 2000

Zubieta XXI Sports Complex


Guipuzcoa, Spain. Project: Izaskun Larzbal, Fernando Grate and Agustn Oteiza Photography: Susana Archaga and Luis M. Ambrs Parklex 2000, Natural Beech

De la Pea Station
Bilbao, Spain. Architect: GPD Studio Parklex 500

La Perla Hotel
Pamplona, Spain. Architect: Javier Martnez Oroquieta Parklex 500, Walnut Parklex 2000, Walnut

Thermae Bath Spa


The Minerva Bath. Bath, United Kingdom. Architect: Nicholas Grimshaw & Partners Photography: Matt Cardy Parklex 700, Maple

Guipuzcoan Football Federation


Guipuzcoa, Spain. Project: Izaskun Larzbal Photography: Susana Archaga and Luis M. Ambrs Parklex 2000, Eucalyptus

Attic in San Sebastian


Guipuzcoa, Spain. Interior design: Vernica Conejos Parklex 2000, Museum Ash

COEC, Catalonian Odontologist and Stomatologist Association


Barcelona, Spain. Architect: Pere Fosch i Alvarez Parklex 3000, Maple

Beroa Bar
Guipuzcoa, Spain. Design: Formak Studio Parklex 2000 (floor) Parklex 3000, Zebrano (bar)

Home in Pamplona
Navarre, Spain. Interior design: Hctor Elizaga Photography: Susana Archaga and Luis M. Ambrs Parklex 2000, Maple

Air France, VIP Lounge


Narita International Airport. Tokyo, Japan. Architect: No Duchaufour-Lawrance Parklex 500, Reconstituted Oak Parklex 2000, Reconstituted Oak

Electronics Arts
London, United Kingdom. Architect: Foster + Partners Photography: Nigel Young Parklex 2000, Natural Beech

Amrey Hotel
Barcelona, Spain. Architect: Ramn Domenech Parklex 2000, Maple

Home in San Sebastian


Guipuzcoa, Spain. Interior design: Javier Machimbarrena Photography: Susana Archaga and Luis M. Ambrs Parklex 2000, Walnut

Home in Puerto Pollena


Majorca, Spain. Architect: Joan Riusech Photography: Susana Archaga and Luis M. Ambrs Parklex 2000, Maple

Technical characteristics

About Parklex
Production process Natural wood

Each type of Parklex is subjected to a different production process, depending on its final application: interiors, exteriors, damp areas, etc. The base is always high-density laminated wood with a paper fiber core that has been treated with thermosetting resins and compressed at high pressure and temperature. Finishes

The surface is always made from 100% natural wood, treated according to its application: to resist special weather conditions or to perfectly resist the intensive use it might receive in interiors.

Range

Perfect adaptation to the project design is an essential requirement. Thats why the technology used to manufacture Parklex allows us to apply different finishes, all in natural wood, to integrate them completely into the environment that is required for each project. International

The variety of finishes and colors in natural and dyed panels sets Parklex apart as a result of its versatility, making it the ideal covering from any type of project.

Architects

Providing service on an international level has meant establishing an extensive network of Parklex distributors on all five continents. This allows us to work more closely with our clients and offer them better service in a way that is more accessible to them. It also lets us understand their needs perfectly and first hand. Guarantees / Quality Certificates

The best architects in the world use Parklex in their most emblematic creations. Why is this so? Because they feel comfortable and at ease, and because the results do not disappoint them. Without a doubt, it is because at Parklex we have been working for over 15 years on a daily basis with architects from all over the world, including, for example, Santiago Calatrava, Frank Gehry, Norman Foster, Jean Nouvel and Nicholas Grimshaw, adapting our range to their requirements. This has made Parklex the natural wood covering of choice in many of the best quality and best-known projects in the world. This can only be achieved by a brand with an absolute guarantee, capable of offering the perfect product, totally adapted to their needs, with problem-free application.

Rigorous testing guarantees Parklexs excellent performance.

Parklex The ideal solution


Quality and performance are only the most visible results of Parklex. As if this werent enough, the advantages offered by Parklex are evident from the moment it is installed, up to its long-term maintenance.

Characteristics

Ease of installation.
The floating flooring system is simple and low-cost. The rest of the products may be easily installed, following clear, professional instructions.

Maintenance.
Parklex does not require any sort of scraping or varnishing as part of its maintenance. It need only be lightly cleansed with a mop, using liquid ph-neutral soap and water.

Acoustic absorption.
Parklex 500 and Parklex 700 may be perforated, making them the ideal materials for acoustic absorption. They have been manufactured specifically for interiors where the acoustic factor is important.

Service.
Parklex has a technical support department to answer any questions regarding product assembly and to give advice on the most appropriate type of covering to meet every need.

Strength.
Material for intensive use indoor areas is made with the highest quality natural wood panels that have been impregnated using the Gureprex system, which provides a series of benefits with regards to abrasion, moisture resistance, hardness, scratch resistance and dimensional stability that are far superior to any of the varnish-treated products currently found on the market.

Quality.
Parklex means quality. All our products have earned the CE mark and carry an absolute guarantee. Exterior panels are manufactured according to the European standard EN 438, which applies to HPL (high pressure laminates). This is why Parklex is the covering preferred by the worlds most prestigious architects.

Moisture resistance.
The technology used by Parklex to manufacture the exterior coverings completely guarantees them against extreme weather conditions: rain, sun, humidity and heat. This same technology allows us to provide a material for interiors with identical resistance properties. Parklex therefore provides the ideal product for damp areas.

Fire behavior.
The entire Parklex line is classified according to the new European standard EN 13.501-1:2002 regarding reaction to fire, obtaining the best results possible for organic materials.

Parklex product guide

Damp areas

700
Stratified timber panels for internal use, with high resistance to humidity.

Walls and ceilings

Dry areas

500
Natural timber ceiling and wall finishes.

Internal

Floating parquet

2000
Natural timber floor for extreme wear environments.

Floors

Raised flooring

3000
Natural timber finish for full access raised floors.

External

Faades

Facade
High-density stratified timber panels for external use.

700

Stratified timber panels for internal use, with high resistance to humidity.
Parklex 700 is a high-density stratified natural timber panel, made from kraft paper that has been treated with thermoset resins compressed under high pressures and temperatures, finished with natural timber veneers. Finish range
(1) Panels manufactured from joined timber

veneers. There may be as many as 12 veneer pieces in each full panel (16 in the case of stained finishes).

Ambar (2)

Antra (2)

Ayous Natural

Black

Bryna (1)

Cherry (1)

Copper (2)

Eucalyptus (1)

Museum Ash (1)

Gold (2)

Grey Beech (1)

Natural Beech (1)

Green Beech (1)

Maple (1)

Walnut (1)

Okume

Onix (2)

Quartz (2)

Quercus (1)

Natural Oak (1)

Reconstituted Oak (1)

Rubi (2)

Sapelli (1)

Silver (2)

Wengue (1)

Natural Zebrano (1)

Surface characteristics
(2) Available only in a Smooth surface finish.

Special finishes
Smooth (3) . Traditional Parklex finish. Reveals the simple, natural beauty of the wood it is manufactured with.

Woodskin . A finish that allows you to feel the grain and subtlety of natural timber.

(3) Only available in the following finishes:

Ambar, Antra, Copper, Gold, Onix, Quartz, Rubi and Silver.

Assembly systems *
Chequerplate Rubber Smooth Rubber Chequerplate (3) Perforated

Exposed fastening. The Parklex panels are fastened with stainless steel screws or rivets to the treated wood or metal substructure. Hidden fastening, using adhesive. The Parklex panels are fastened using adhesive to the treated wood or metal substructure.

Hidden fastening, with special hanging profiles. The Parklex panels are attached to the aluminum substructure, using guide profiles and hanging pins. Hidden fastening, with caps. The Parklex panels are attached with screws hidden by caps with a diameter of 10,75mm and a section of 2mm, using the same material and finish as the panel.

Panel construction
Moisture resistant overlay Natural timber veneer HPL core Natural timber veneer Bakelite Balancing film

* For more information on installation, consult the Internal Parklex Assembly Catalogue or our web page (www.parklex.com).

Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.

Technical characteristics 1. Inspection requirements


Tests Standard Property or Attribute Mesure Unit
Thickness 6 mm | Surface finish Lisse

Result

Colour, pattern and surface finish

EN 438-8 Apto. 5.2.2.3

Du e to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the dcor. There are differences in light fastness performances depending on the wood species and the source of the wood.

2. Dimensional tolerances
Tests Standard Property or Attribute 6,0 8,0 12,0 16,0 20,0 t < 8,0 t < 12,0 t < 16,0 t < 20,0 t < 25,0 Mesure Unit Result 0,40 0,50 0,60 0,70 0,80 +10 / -0 1,5 1,5

Thickness (t)

EN 438-2 Part. 5

mm

Length and width Edge straightness Edge squareness

EN 438-2 Part. 6 EN 438-2 Part. 7 EN 438-2 Part. 8

mm mm/m mm/m

3. General
Tests Flexural strength Flexural modulus Resistance to inmersion in boling water Dimensional stability Resistance to impact y large diameter ball Tensile strength Density Standard EN ISO 178 EN ISO 178 EN 438-2 Part. 12 Property or Attribute Longitudinal direction Transversal direction Longitudinal direction Transversal direction Moisture absorbed Appearance Cumulative dimensional change (t 6mm)
Maximun height for which no visible surface craking or imprint greater than (t 6mm)

Mesure Unit Mpa Mpa % Degree % max mm Mpa gr/cc

Result 80 80 9.000 9.000 2 2 4 0,30 0,60 1.800 60 1,35

EN 438-2 Part. 17 EN 438-2 Part. 21 EN ISO 527-2 EN ISO 1.183

Longitudinal direction Transversal direction Density

4. CE Safety requirements
Tests Water vapour permeability Rsistance to fixings Content of pentachlorophenol Release of formaldehyde Standard EN 438-7 Part. 4.4 EN 438-7 Part. 4.5 EN 438-7 Part. 10 EN 438-7 Part. 10 Property or Attribute Wet cup meted Dry cup method Force Content pentachlorophenol Release of formaldehyde Nw/mm ppm Rating Mesure Unit Result 110 250 400 Non detectable E1

5. Fire reaction (UNE EN 13.501-1)


Spec. S F Thickness 6 mm. 6 mm. Result C S2 d0 B S2 d0
REV: 002 / July 2006

Panel dimensions
Length x width 2440 x 1220 mm.
Other thicknesses may be available upon request.

Smooth thickness 3, 6, 8, 10, 12, 14, 18 and 22 mm.

Chequerplate thickness 10, 12, 14, 18 and 22 mm.

500

Natural timber ceiling and wall finishes.

Parklex 500 is a timber panel manufactured from 100% natural timber fibres, pressed under high temperatures and impregnated with thermoset resins using our exclusive Gureprex system.

Finish range
(1) Panels manufactured from joined timber

veneers. There may be as many as 12 veneer pieces in each full panel (16 in the case of stained finishes).

Ambar

Antra

Ayous Natural

Black

Bryna (1)

Cherry (1)

Eucalyptus (1)

Museum Ash (1)

Grey Beech (1)

Natural Beech (1)

Green Beech (1)

Maple (1)

Walnut (1)

Okume

Onix

Quercus (1)

Natural Oak (1)

Reconstituted Oak (1)

Rubi

Sapelli (1)

Wengue (1)

Natural Zebrano (1)

Surface characteristics
Woodskin . A finish that allows you to feel the grain and subtlety of natural timber.

Panel construction
Gureprex wear resistant overlay Natural timber veneer Resin bonded WBP plywood core HPL balancer

Acoustics
Parklex 500 acoustic is designed for interior wall and ceiling finishes requiring high levels of acoustic absorption. It is machined in different forms and dimensions allowing for the desired level of acoustic performance.
Slots Perforated

Assembly systems *
Exposed fastening. The Parklex panels are fastened with stainless steel screws or rivets to the treated wood or metal substructure. Hidden fastening, using adhesive. The Parklex panels are fastened using adhesive to the treated wood or metal substructure. Hidden fastening, with special hanging profiles. The Parklex panels are attached to the aluminum substructure, using guide profiles and hanging pins. Hidden fastening, with caps. The Parklex panels are attached with screws hidden by caps with a diameter of 10,75mm and a section of 2mm, using the same material and finish as the panel.

* For more information on installation, consult the Internal Parklex Assembly Catalogue or our web page (www.parklex.com).

Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.

Technical characteristics 1. Inspection requirements


Tests Standard Property or Attribute Mesure Unit
Thickness 6 mm

Result

Colour, pattern and surface finish

EN 438-8 Apto. 5.2.2.3

Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the dcor. There are differences in light fastness performances depending on the wood species and the source of the wood.

2. Dimensional tolerances
Tests Standard Property or Attribute t = 6,0 t = 8,0 t = 11,0 t = 14,0 t = 20,0 t = 25,0 t = 40,0 Mesure Unit Result + 1,0 / - 0,6 + 1,0 / - 0,7 + 1,2 / - 0,8 + 1,3 / - 0,9 + 1,4 / - 1,0 + 1,6 / - 1,2 + 2,0 / - 1,6 +10 / -0 1,5 1,5

Thickness (t)

EN 438-2 Part. 5

mm

Length and width Edge straightness Edge squareness

EN 438-2 Part. 6 EN 438-2 Part. 7 EN 438-2 Part. 8

mm mm/m mm/m

3. General
Tests Resistance to surface wear Resistance to inmersion in boling water Resistance to scratching Lightfastness (xenon arc) Flexural strength Flexural modulus Standard EN 438-2 Part. 10 Property or Attribute Resistance to surface wear Mesure Unit Revolutions Initial wear point Wear resistance Rating Rating Grey scale rating Mpa Mpa Result 50 150 4 2 4 4 (A) 70 60 7.000 6.000

EN 438-2 Part. 12 EN 438-2 Part. 25 EN 438-2 Part. 27 EN 310 EN 310

Aspect Force Contrast Longitudinal direction Transversal direction Longitudinal direction Transversal direction

(A) Ayous Natural, Bryna, Cherry, Museum Ash, Grey Beech, Natural Beech, Maple and Reconstituted Oak.

4. CE Safety requirements
Tests Resistance to fixings Bonding strength Flexural tensile strength Content of pentachlorophenol Glue-line quality Resistance to elevated temperature Water resistance Release of formaldehyde Density Perpendicular tensile strength Standard EN 438-7 Part. 4.5 EN 438-7 Part. 4.7 EN 438-7 Part. 4.8 EN 438-7 Part. 4.10 EN 438-7 Part. 4.13.3 EN 438-7 Part. 4.13.3 EN 438-7 Part. 4.13.3 EN 717-1 ASTM C 297 Property or Attribute Force Bond strength Bond strength Content pentachlorophenol Expression of results Aspect Thickness increase Release of formaldehyde Density Adhesion force Mesure Unit Nw/mm Mpa Mpa ppm Rating Result % Rating Gr/cc Mpa Result 200 1,420 1,420 5 5 No damage 7 E1 0,75 2

5. Fire reaction (UNE EN 13.501-1)


Spec. S F Thickness 8 mm. 14 mm. Result D S3 d0 B S2 d0
REV: 002 / July 2006

Panel dimensions
Length x width 2440 x 1220 mm.
Other thicknesses may be available upon request.

Smooth thickness 8, 11, 14, 17, 20 and 26 mm.

2000

Natural timber floor for extreme wear environments.


Parklex 2000 is a natural timber floating floor made from the highest quality veneers, impregnated using our exclusive Gureprex system. This provides extraordinary qualities of dimensional stability and resistance to both abrasion and humidity. Finish range
(1) Panels manufactured from joined timber

veneers. There may be as many as 12 veneer pieces in each full panel (16 in the case of stained finishes).

Ambar

Antra

Ayous Natural

Black

Bryna (1)

Cherry (1)

Eucalyptus (1)

Museum Ash (1)

Grey Beech (1)

Natural Beech (1)

Green Beech (1)

Maple (1)

Walnut (1)

Okume

Onix

Quercus (1)

Natural Oak (1)

Reconstituted Oak (1)

Rubi

Sapelli (1)

Wengue (1)

Natural Zebrano (1)

Surface characteristics
Matt. A finish that provides a high quality, comfortable surface appearance that only authentic natural timber can provide.

Maintenance and cleaning


Maintenance. The non-porous nature of the surface prevents the penetration of dirt. Parklex 2000 requires no specific stripping or re-finishing. Cleaning. Mop with water and (neutral) gel soap.

Resistance to abrasion
Resistance to abrasion

Assembly systems *
Floating parquet. Floating installation of boards glued tongue-in-groove over a layer of insulation. Parquet over underfloor heating. Installation as floating parquet over underfloor heating. * For more information on installation, consult the Internal Parklex Assembly Catalogue or our web page (www.parklex.com). Glued. Installation of tongue-in-groove boards that are adhered to waterproof DM, using lines of adhesive.

AC4

Panel construction
Gureprex wear resistant overlay Natural timber veneer Resin bonded WBP plywood core HPL balancer

Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.

Technical characteristics 1. Inspection requirements


Tests Standard Property or Attribute Mesure Unit
Thickness 14 mm

Result

Colour, pattern and surface finish

EN 438-8 Apto. 5.2.2.3

Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the dcor. There are differences in light fastness performances depending on the wood species and the source of the wood.

2. Dimensional tolerances
Tests Gap between pieces Leap between pieces Standard EN 13.329 EN 13.329 Property or Attribute Mesure Unit mm mm Result 0,20 0,15

3. General
Tests Density Resistance to surface wear Resistance to immersion in boiling water Impact resistance (small diameter ball) Resistance to scratching Resistance to stain Light fastness (xenon arc) Resistance to cigarettes burns Flexural strength Flexural modulus Standard EN 438-2 Part.10 EN 438-2 Part. 12 EN 438-2 Part. 20 EN 438-2 Part. 25 EN 438-2 Part. 26 EN 438-2 Part. 27 EN 438-2 Part.30 EN 310 EN 310 Property or Attribute Density Initial point (IP) Aspect Force resort Force Aspect Contrast Aspect Longitudinal direction Transversal direction Longitudinal direction Transversal direction Mesure Unit Gr/cc Revolutions Degree Nw Degree Rating (Groups 1 and 2) Rating (Group 3) Grey scale rating Degree MPa MPa Result 0,75 AC4 4.000 4 10 3 5 4 4 4 (A) 2 70 60 7.000 6.000

(A) Ayous Natural, Bryna, Cherry, Museum Ash, Grey Beech, Natural Beech, Maple and Reconstituted Oak.

4. CE Safety requirements
Tests Formaldehyde release Electric resistance Tendency to accumulation electrostatic charges Thermal conductivity Pentachlorophenol content Water tightness Slide Standard EN 717-1 EN 1.801 EN 1.815 EN 12.524 EN 12.673 EN 13.553 EN 13.983 Property or Attribute Classification Vertical resistance Potential difference Conductivity Concentration Water penetration Dynamic coefficient of friction Mesure Unit Rating M KV W/(m K) ppm Classification Result E1 825 2 KV 0,17 5 Watertight 0,73

5. Fire reaction (UNE EN 13.501-1)


Thickness 11 mm. Result B fl S1

Panel dimensions and package measurements


PANEL DIMENSIONS
(14 mm. thickness)

PACKAGE MEASUREMENTS Contents per package No. of panels 8 1 1 m2 3,68 0,71 1,44 Kg 40 9,5 17 No. panels 192 84 42 Maximum contents per pallet 24 88,3 59,7 60,7 960 800 800
REV: 003 / Jan 2007

Length x width 2450 x 188 mm. 2450 x 290 mm. 2450 x 590 mm.
Other thicknesses may be available upon request.

No. packages

m2

Kg

3000

Natural timber finish for full access raised floors.


Parklex 3000 is a high-density stratified timber panel, impregnated using our exclusive Gureprex system. It may be adhered to any type of support material (fibreboard, MDF, fibre cement, galvanised steel etc.) normally used to construct full access floors. Finish range
(1) Panels manufactured from joined timber

veneers. There may be as many as 12 veneer pieces in each full panel (16 in the case of stained finishes).

Ambar

Antra

Ayous Natural

Black

Bryna (1)

Cherry (1)

Eucalyptus (1)

Museum Ash (1)

Grey Beech (1)

Natural Beech (1)

Green Beech (1)

Maple (1)

Walnut (1)

Okume

Onix

Quercus (1)

Natural Oak (1)

Reconstituted Oak (1)

Rubi

Sapelli (1)

Wengue (1)

Natural Zebrano (1)

Surface characteristics
Matt. A finish that provides a high quality, comfortable surface appearance that only authentic natural timber can provide.

Assembly systems *
Hidden fastening, using adhesive. The Parklex panels are attached to different types of supports, using adhesive. * For more information on installation, consult the Internal Parklex Assembly Catalogue or our web page (www.parklex.com).

Panel construction
Gureprex wear resistant overlay Natural timber veneer HPL balancer

Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.

Technical characteristics 1. Inspection requirements


Tests Standard Property or Attribute Mesure Unit
Thickness 1 mm

Result

Colour, pattern and surface finish

EN 438-8 Apto. 5.2.2.3

Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the dcor. There are differences in light fastness performances depending on the wood species and the source of the wood.

2. Dimensional tolerances
Tests Thickness (t) Length and width Edge straightness Edge squareness Planimetry Standard EN 438-2 Part. 5 EN 438-2 Part. 6 EN 438-2 Part. 7 EN 438-2 Part. 8 EN 438-2 Part. 9 Property or Attribute t = 1 mm Mesure Unit mm mm mm/m mm/m mm/m Result 0,15 mm +10 / -0 1,5 1,5 120

3. General
Tests Density Resistance to surface wear Resistance to immersion in boiling water Dimensional stability at high temperatures Impact resistance (small diameter ball) Resistance to scratching Light fastness (xenon arc) Resistance to stain Resistance to cigarettes burns Standard EN ISO 1.183 EN 438-2 Part. 10 Property or Attribute Density Resistance to surface wear Mesure Unit Gr/cc Revolutions Abrasion class Initial wear point Pass/Fail % max Nw Degree Grey scale rating Groups 1 and 2 Group 3 Degree Result 1,10 AC4 4.000 Pass 0,75 1,25 10 3 4 4 (A) 5 4 2
REV: 002 / June 2007

EN 4382- Part.12 EN 438-2 Part. 17 EN 4382- Part.20 EN 438-2 Part. 25 EN 4382- Part.27 EN 4382- Part.26 EN 4382- Part.30

Delamination L T Force resort Force Contrast Aspect Aspect

(A) Ayous Natural, Bryna, Cherry, Museum Ash, Grey Beech, Natural Beech, Maple and Reconstituted Oak.

Measurements
Standard 610 x 610 mm.
Special dimensions available for other applications, upon request.

Maximum 2440 x 1220 mm.

Thickness 1 mm.

Other Parklex products

Facade
High-density stratified timber panels for external use.
Parklex Facade is a high-density stratified timber panel manufactured from kraft paper treated with resins thermoset under high pressure and temperature, finished with natural timber veneers highly resistant to UV radiation and atmospheric agents.

External

Parklex Facade includes Everlook , a special overlay that dramatically increases the normal life of the panel, improving UV resistance and colour stability. It also allows for the development of new panels with an extensive range of finishes.

Finish range

Ambar

Antra

Copper

Gold

Onix

Quartz

Rubi

Silver

Surface characteristics
Smooth. Traditional Parklex finish. Reveals the simple, natural beauty of the wood it is manufactured with.

Panel construction
PVDF Antigraffiti overlay
Everlook

Natural timber veneer HPL core Natural timber veneer Balancing film Bakelite

NOTE. For more information about this product, consult the Parklex Exteriors Catalogue, the External Parklex Assembly Catalogue or our web page (www.parklex.com).

Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.

Applications

1.

2.

3.

1. Semilcos

Vicenza, Italy. Architect: Pollini+Smania

head office

2. Hospital

Korea. Architect: Seo hae-cheon

3. Children

Ireland. Architect: Traynor OToole

Museum

4. Alhambra

4.

Granada, Spain. Architect: Francisco Martnez Manso, Rafael Soler Mrquez

Information points

Facade 700 500 2000 3000

EN/v02/0812
ER-0370/2003

www.parklex.com
COMPOSITES GUREA, S.A. [t ] +34 948 625 045 [f ] +34 948 625 015 Zalain auzoa, 13 parklex@parklex.com

31780 Vera de Bidasoa Navarra (Spain)

Vous aimerez peut-être aussi