Académique Documents
Professionnel Documents
Culture Documents
CODE NUMBER:
PAGE :
IR010300
of
SCOPE:
PIPE: High Frequency Welded Line Pipe, Class B, NPS 4 and larger.
TEST and INSPECTION PER: 01-SAMSS-033 , ISO 3183-2 & Specifications As Noted Below. (1) VISUAL INSPECTION / WITNESSING BY INSPECTOR (Note 1) (2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR (3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER 0010
0010 X
Pre-Fabrication/Production Requirements
Manufacturing Procedure
0020
NDE Procedures
0020
0010 X X
0020
01-SAMSS-332
0030
Mechanical Properties and Tests:b) Fracture Toughness Tests Mechanical Properties and Tests:c) Weld Microstructure Test Mechanical Properties and Tests:d) Hardness Tests
0040
01-SAMSS-332 & ASTM E112: check for normalized zone, microstructure, grain size, uniform forged structure, fusion line perpendicular to surface, and measure metal distortion angles. 01-SAMSS-332: maximum 240 HV and ID measurements shall not exceed OD measurement. ISO 3183-2
0050
0060
0070
0080
Hydrostatic Tests
01-SAMSS-332 & ISO 3183-2: seam shall be positioned in upper quadrant. 01-SAMSS-332 & ISO 3183-2: no pipe lengths < 10.0 m.
0090
0100
Nondestructive Testing Requirements:a) Ultrasonic examination (UT) ofWeld Nondestructive Testing Requirements:b) Ultrasonic examination (UT) ofSkelp or Pipe Nondestructive Testing Requirements:c) Ultrasonic examination (UT) ofpipe ends Nondestructive Testing Requirements:d) Supplementary NDT Requirements
0110
0120
0130
01-SAMSS-332 Annex D
IR010300
Continued...
CODE NUMBER:
PAGE :
IR010300
of
(1) VISUAL INSPECTION / WITNESSING BY INSPECTOR (Note 1) (2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR (3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER Specification Details / Notes :
0140 X X Heat Treatment
0030
0010 X
0020
Marking
0030
Handling
0040
ISO 3183-2, section 8.2.3.9 with acceptance criteria ISO 3183-2, section 7.5
Notes: (1) May only be waived by the responsible Saudi Aramco, ASC, AOC Inspection Offices. (2) See form SA175 000003 for instructions on using this form.
End of IR010300