Académique Documents
Professionnel Documents
Culture Documents
TABLE OF CONTENTS
Introduction .......................................................................................... 2-8
Jiffee-Joint Gaskets................................................................................ 60
Interceptors....................................................................................205-232
Hydrants........................................................................................ 240-248
1
TOC Index Intro.qxd 5/7/08 9:56 AM Page 2
ROOF DRAINS
DESCRIPTION
SERIES NUMBER 21500 SERIES LARGE SUMP
APPLICATION
Used on roofs of any size, for any type of construction. Large slotted dome provides
maximum free area for quick drainage of rainwater and protects the drain sump and
connected piping from debris. WEJLOC® compression flashing clamp holds the mem-
BASE PRODUCT SHADED brane or flashing securely to the drain body.
SPECIFICATION
JOSAM 21500 Series coated cast iron Roof Drain, large polypropylene locking dome,
WEJLOC® non-puncturing clamp ring with integral gravel stop, large sump with wide
roof flange and bottom outlet.
Available Options
AVAILABLE OPTIONS ▼ -AE LEVELEZE® Adjustable Ext. ▼ -16 * Internal Waterguard DIMENSIONAL DRAWING
▼ -AER Adjustable Extension Using 2"- 6" Outlets Only
Threaded Rods -17 * 2" High Solid
▼ -IRMA Perforated Stainless Clamping Collar
Steel Extension ▼ -19 Clamp Collar w/Perforated
-CR Clamping Drain Receiver SS Gravel Guard
-1 Deck Clamp Assembly -20 Galv. Cast Iron Parts
-1C Drain Receiver Clips (Min. -21 Galv. Cast Iron Dome Only
Deck Opening 16.5" Dia.) -22 Cast Iron Dome
-2 Drain Receiver -23 Rough Bronze Dome
-3 Deck Clamp Assembly and -26 Aluminum Dome
AVAILABLE OUTLETS -3C
Drain Receiver
Drain Receiver and
-33 Stainless Mesh
Screen-Covered Dome
Drain Receiver Clips
-4 Secondary Flashing Clamp
(use with -AE only)
-VP
OUTLETS:
Vandal-Proof Dome
•
CONFORMS WITH ASTM-C564.
THIS DIM. IS 5-3/4" FOR 21508-T. OUTLET TYPES AVAILABLE
-66 No-Hub Side Outlet, 2"-6"
▼ -6 Extra Wide Flange Drain FOR OUTLET TYPE SPECIFY -T, -X, -Y or -Z
-T Threaded Outlet
-10
Body, 2"- 6"-X only
Fixed Ext. Collar, C.I., (Specify -X
-Y
Inside Caulk Outlet
Hub Outlet w/Gasket, 2"-4"
TYPE NO.
21502
PIPE SIZE
2
LBS.
36
TYPE NO.
21506
PIPE SIZE
6
LBS.
40
DIMENSION &
Hgt.) 4"Std.
SERIES NUMBER -10-20 Fixed Ext. Collar, Galv.,
(Specify Hgt.) 4"Std.
-Z No-Hub Spigot Outlet 21503
21504
3
4
37
38
21508
21509-Z
8
10†
42
43
WEIGHT CHART
*-16 and -17 cannot be furnished together.
21505 5 39 †10” AVAILABLE IN NO-HUB ONLY.
WITH OPTION
21500-6 SERIES LARGE SUMP with -6 Extra Wide Flange Drain Body OPTION DESCRIPTION
APPLICATION
Used on roofs of any size, typically concrete decking, large slotted dome ensures
maximum free area for quick drainage of rainwater and protects the drain sump
APPLICATION and connected piping from debris. WEJLOC® compression-flashing clamp holds the
membrane or flashing securely to the drain body. Extra wide flange provides posi-
tive support and large bonding surface for liquid applied membranes.
SPECIFICATION
SPECIFICATION JOSAM 21500-6 Series coated cast iron Roof Drain, large polypropylene locking
dome. WEJLOC® non-puncturing clamp ring, large sump with extra-wide roof flange
and bottom outlet inside caulk connection.
OPTIONS N/A:
-2, -4
DIMENSIONAL DRAWING
OPTIONS NOT AVAILABLE
2
TOC Index Intro.qxd 4/9/08 9:06 AM Page 3
.com
Example of frequently
updated items
J u s t a F e w o f T h e M a n y F e a t u re s Av a i l a b l e a t
w w w. j o s a m . c o m
• Easy Navigation
• Instant List Pricing
• Representative Directory
• Company News, Events and Literature Updates
• Downloadable Brochures and Catalogs
• Various Search Options, Including Search by
Product Type, Application or Competitor's
Part Number
• Submittal Drawing List
• Expedite Orders
• Obtain CAD or PDF Drawings
• Spare Parts List
3
TOC Index Intro.qxd 3/28/08 1:26 PM Page 4
NUMERICAL INDEX
SERIES NO. PAGE SERIES NO. PAGE SERIES NO. PAGE SERIES NO. PAGE
4
TOC Index Intro.qxd 3/28/08 1:26 PM Page 5
NUMERICAL INDEX
SERIES NO. PAGE SERIES NO. PAGE SERIES NO. PAGE SERIES NO. PAGE
5
TOC Index Intro.qxd 3/28/08 1:26 PM Page 6
ALPHABETICAL INDEX
DESCRIPTION PAGE DESCRIPTION PAGE DESCRIPTION PAGE DESCRIPTION PAGE
6
TOC Index Intro.qxd 3/28/08 1:26 PM Page 7
ALPHABETICAL INDEX
DESCRIPTION PAGE DESCRIPTION PAGE DESCRIPTION PAGE DESCRIPTION PAGE
Low Boy . . . . . . . . . . . . . . . . . . 216 Nozzle, Downspout . . . . . . . . . . . . . 92 Parking Deck . . . . . . . . . . . . . 83-84 Abbreviations Used
Manual Clean . . . 211-212, 217-218 NON-CLOG Drains . . . . . . . . . 111, 120 Plaza . . . . . . . . . . . . . . . . . . . . . . 87
Recessed . . . . . . . . . . . . . . 213, 215
Semi-Automatic Draw-Off . . 214-215 O
Promenade Deck . . . . . . . 80-84, 87 in This Catalog
Sill . . . . . . . . . . . . . . . . . . . . . . . . 88
Grease Recovery Device. . . 205, 211, 219 Oil Separators Sizing . . . . . . . . . . . . . . . . . . . 66-69 Adj. Adjustable
Extended Top. . . . . . . . . . . 225, 227 S ANSI American National Standards
H External Storage Tanks . . . 226, 228 Sanitary Floor Drains (Floor Sinks) Institute
Hair Interceptors. . . . . . . . . . . 230-232 Gravity Draw-Off . . . . . . . . 224-227 Cast Iron . . . . . . . 162-184, 151-157 A.R.E. Acid Resisting Enamel
Hospital Interceptors . . . . . . . 230-232 High-Volume . . . . . . . . . . . 227-228 Stainless Steel . . . . . . 148, 154-156
Installations. . . . . . . . . . . . . . . . 224 ASME American Society of
Hub Connectors . . . . . . . . . . . 262-265 Sediment Interceptors . . . . . . 230-232 Mechanical Engineers
Hydrants Sizing. . . . . . . . . . . . . . . . . . . . . 223
Options, Illustrated Sensing and Alarm Probe . . . . . . . 217 ASPE American Society of
Features. . . . . . . . . . . . . . . . . . . 240 Separators, Oil . . . . . . . . . . . . 222-229
How to Order . . . . . . . . . . . . . . 241 Carriers Plumbing Engineers
Installations. . . . . . . . . . . . . . . . 244 Closet . . . . . . . . . . . . . . . . . . . 20 Sewer Valves (See Backwater Valves) ASSE American Society of Sanitary
Integral Vacuum Breaker . . 245-246 Fixture. . . . . . . . . . . . . . . . . . . 44 Shock Absorbers, Arresters. . . . . . . 251 Engineers
Mild Climate . . . . . . . . . . . 245-246 Floor Drains. . . . . . . . . . . . . . . . 108 Shower Room Drains . . . . . . . 110-111 ASTM American Society for Testing
Non-Freeze. . . . . . . . . . . . . 245-248 Floor Sinks. . . . . . . . . . . . . . . . . 161 . . . . . . . . . . . . . . . . . . . 114-122 & Materials
Parts List . . . . . . . . . . . . . . . . . . 243 Roof Drains . . . . . . . . . . . . . . . . . 65 Sill Drains. . . . . . . . . . . . . . . . . . . . . 88 Aux. Auxiliary
Repair Kits. . . . . . . . . . . . . . . . . 242 Ordering Information Sinks, Floor
Wall . . . . . . . . . . . . . . 245-246, 248 Backwater Valves . . . . . . . . . . . 234 Br. Branch
(SUPER-FLO-SEPTORS®) . . . 162-184
Yard . . . . . . . . . . . . . . . . . . 247-248 Carriers Brz. Bronze
Sink Fixture Supports (See Carriers)
HYDRASAN® I, Anti-Siphon. . . 245-246 Closet . . . . . . . . . . . . . . . . . . . . 9 BWV Backwater Valve
Fixture. . . . . . . . . . . . . . . . . . . 39 Sleeves, Stack . . . . . . . . . . . . . . . 94-95
Cap. Capacity
I Cleanouts . . . . . . . . . . . . . . . . . 186 Solids Interceptors . . . . . . . . . 230-232
Spigot Adapters . . . . . . . . . . . . . . . 262 C.I. Cast Iron
Inlets, Fresh Air . . . . . . . . . . . . 265-266 Floor Drains. . . . . . . . . . . . . . . . . 99
Interceptors Floor Sinks. . . . . . . . . . . . . . . . . 161 Stack Sleeves . . . . . . . . . . . . . . . 94-95 CISPI Cast Iron Soil Pipe Institute
Checklist . . . . . . . . . . . . . . . . . . 206 Hydrants . . . . . . . . . . . . . . . . . . 241 Stainless Steel Products CP Chrome Plated
Dental Labs . . . . . . . . . . . . 230-232 Interceptors . . . . . . . . . . . . . . . . 206 Cast Stainless Dim. Dimension
External Storage Tanks . . . 226, 228 Roof Drains . . . . . . . . . . . . . . . . . 64 Cleanouts . . . . . . . . . . . . . . . 157
Stainless Steel . . . . . . . . . . . . . . 150 DWV Drain, Waste, Vent
Flow Control Fittings . . . . . . . . . 221 Floor Drains . . . . . . . . . . 151-153
Grease . . . . . . . . . . . . . . . . 200-219 Trench Drains . . . . . . . . . . . . . . 253 Ext. Extension
Fabricated Stainless Steel
Grease Recovery Device . . . . . . 205 Floor Drains/Sinks . . . . . 154-156 Ftg. Fitting
. . . . . . . . . . . . . . . . . . . 211, 219 P Grease Recovery Device . . . . 219 Galv. Galvanized
Hair . . . . . . . . . . . . . . . . . . 230-232 “P” Traps
Cast Iron . . . . . . . . . . . . . . . . . . 260 Standards, ANSI, ASSE, PDI . . . . . . . . 2 G.P.H. Gallons Per Hour
Industrial. . . . . . . 217-218, 227-228
Installations. . . . . . . . . . . . 210, 224 Packing House Drains Standing Water Guard . . . . . . . . 75-76 G.P.M. Gallons Per Minute
Lint. . . . . . . . . . . . . . . . . . . 230-232 Acid-Resisting . . . . . . . . . . 182-184 Strainers G.R.D. Grease Recovery Device
Oil . . . . . . . . . . . . . . . . . . . 222-229 Cast Iron . . . . . . . . . . 127, 139, 144 Adjustable . . . . . . . . . . . . . 110-116 H.P.T. Hose Pipe Thread
Oil Sludge . . . . . . . . . . . . . . . . . 229 Stainless Steel . . . . . . 148, 154-156 Sediment . . . . . . . . . . . . . . . . . . 111
ID Inside Diameter
Plaster . . . . . . . . . . . . . . . . 230-231 Parapet Drains . . . . . . . . . . . . . . 89-90 Sump Receiver
Sediment . . . . . . . . . . . . . . 230-232 (Drain Receiver) . . . . . . . . 61, 64-65 IRMA Insulated Roof Membrane
Parking Deck Drains Assembly
Sensing and Alarm Probe . . . . . 217 Floor. . . . . . . . . . 127, 130, 132-133
Sizing Roof . . . . . . . . . . . . . . . . . . . . 83-84 T JSP Josam Service Program
Grease . . . . . . . . . . . . . . . . . 207 Parking Lot Access Cover . . . . 201-203 Traps L.H. Left Hand
Oil . . . . . . . . . . . . . . . . . . . . . 223 Planting Area Drains . . . . . . . . . . . 145 Deep Seal . . . . . . . . . . . . . . . . . 260 NB Nickel Bronze
Solids w/Drains . . . 118-119, 122, 140-142
Dental Labs . . . . . . . . . . 230-232 Plaster Interceptor . . . . . . . . . 230-231 N.P.S.L. National Pipe Straight Locknut
w/Funnel . . . . . . . . . . . . . . . . . . 260
Hair . . . . . . . . . . . . . . . . 230-232 Plaza Drains. . . . . . . . . . . . . . . . . . . 87 Grease . . . . . . . . . . . . . . . . 205-219 N.P.T. National Pipe Taper
Jewelry . . . . . . . . . . . . . . . . . 230 Plugs, Cleanout . . . . . . . . . . . . . . . 195 Hair . . . . . . . . . . . . . . . . . . 230-232 O.C. On Center
Lint . . . . . . . . . . . . . . . . 230-232 Promenade Roof Drains . . . . 80-84, 87 Lint. . . . . . . . . . . . . . . . . . . 230-232 OD Outside Diameter
Plaster . . . . . . . . . . . . . . 230-231 PVC Products Oil . . . . . . . . . . . . . . . . . . . 222-229 PDI Plumbing and Drainage
Isolation Deck Drain . . . . . . . . . . . . 97 Drain Bodies. . . . . . . . . . . . . . . 269 Plaster . . . . . . . . . . . . . . . . 230-231 Institute
Drain Assemblies. . . . . . . . 270-271 Sediment . . . . . . . . . . . . . . 230-232
J Floor Sink . . . . . . . . . . . . . . . . . 272 Stainless Steel . . . . . . . . . . . . . . 219
POA Price on Application
Joints, Roof Drain Expansion . . . . . . 94 Cleanout. . . . . . . . . . . . . . . . . . 272 R.H. Right Hand
Trap Primers. . . . . . . . . . . . . . . . . . 261
JIFFEE-JOINT Gasket . . . . . . . . . . . . 60 w/Distribution Unit . . . . . . . . . . 261 S.F. Satin Finish
JIFFEE-SET Gasket . . . . . . . 61, 98, 107 R Trench Drains SS Stainless Steel
Receptor Drains . . . . . . . . . . . . . 92-93
SV Service Weight
K Riser Sleeves. . . . . . . . . . . . . . . . 94-95 How to Order . . . . . . . . . . . . . . 253
w/Frames . . . . . . . . . . . . . . 255-256 SW Service Weight
Key Lock Drain. . . . . . . . . . . . . . . . 126 Roof Drains
XH Extra Heavy
L
Adjustable LEVELEZE® . . 75-76, 81, 96
Balcony . . . . . . . . . . . . . . . . . . . . 88
U
Lavatory Fixture Supports Urinal Supports (See Carriers)
Composition Deck . . . 80, 82, 85-87
(See Fixture Carriers) Controlled Flow (FLO-SET®). . . . . 96 V
Drain Receiver . . . . . . . . . 61, 64-65 Valves (See Backwater Valves)
LEVELEZE ®
Extensions
Cleanouts . . . . . . 185, 188-193, 195 Vent Caps, Vandal-Proof . . . . . . . . . 95
Fixed . . . . . . . . . . . . . . . . . 61, 65
Floor Drains . . 125-126, 129-130, 139 LEVELEZE®. . . . . . . . . . 61, 75, 96 Vent Stack Sleeves . . . . . . . . . . . 94-95
Roof Drains . . . . . . . . 75-76, 81, 96
Loading Dock Drain . . . . . . . . . . . . 133
Flashing Sleeves. . . . . . . . . . . 94-95
FLO-SET® . . . . . . . . . . . . . . . . . . . 96
W
Wall Access Covers. . . . . . . . . 198-203
Low Boy Grease Interceptor . . . . . 216 Flooding Water Dam . . 75-76, 92-93
How to Order . . . . . . . . . . . . . . . 64 Wall Hydrants . . . . . . . . . 245-246, 248
M IRMA . . . . . . . . . . . . . . . . . . . 77, 82 Wall-Hung Fixture Supports
Materials & Finishes . . . . . . . . . . . . . 8 Indirect Waste . . . . . . . . . . . . 92-93 (See Carriers)
Mop Sink (See Floor Sinks) Isolation Deck . . . . . . . . . . . . . . . 97 Water Hammer Arresters . . . . . . . . 251
Options, Illustrated . . . . . . . . . . . 65
N Overflow . . . . . . . . . . . 75-76, 92-93 Y
Nipples, Closet Carriers . . . . . . . . . . 18 Parapet. . . . . . . . . . . . . . . . . . 89-90 Yard Hydrants. . . . . . . . . . . . . 247-248
7
TOC Index Intro.qxd 3/28/08 1:26 PM Page 8
CAST IRON:
JOSAM gray iron is produced to ASTM Standards and has a 25,000 p.s.i. minimum tensile strength. The use of quality materials and the
most modern production methods results in sound, dependable metal with good corrosion resistance.
DUCTILE IRON:
A nodular graphite iron with the strength of steel is supplied for gratings, which must carry the heaviest loads.
NIKALOY:
This nickel bronze alloy is used when a high strength harder bronze material is needed for chemical resistance and a long-lasting, easily-
maintained bright finish. Use of Nikaloy instead of cast iron may reduce load classification.
ACID-RESISTING COATINGS:
Floor Sinks are provided with an acid-resisting porcelain enameled or high-gloss baked epoxy sanitary acid-resisting white coating that
has an excellent appearance and is easy to clean. The acid-resisting coating provided on other cast iron and steel products is a two-
part epoxy coating.
STAINLESS STEEL:
Stainless steel is commonly used in the dairy, food processing, chemical, pharmaceutical and institutional industries. Available in type
304 and 316L stainless steel.
Finishes
ROUGH:
This designation applies to Nikaloy and bronze items, which are supplied in an "as cast" condition. All of the features of Nikaloy and
bronze are present.
PAINTED:
JOSAM’s protective coating is an acrylic latex water-reducible air-dry paint.
SATIN:
Low luster finish applied to Nikaloy and bronze products makes them compatible with the present architectural trends calling for
exposed hardware to be inconspicuous in appearance. This satin finish has been selected by JOSAM to be standard on all Nikaloy and
bronze finished parts.
8
Closet Carriers_08.qxd 4/10/08 5:45 PM Page 9
CLOSET CARRIERS
Types of Carriers
CARRIERS
The JOSAM 12000 Series and –32 Wide Chase Closet Carriers for commercial installation suit all makes and types of off-the-floor closet bowls.
Simply indicate the information below for the product desired.
How To Order
EXAMPLE: Series No. 12704
12704 -LH4 -10
Outlet Size
TYPICAL
INSTALLATION
SHOWN
1. If flow in waste line is from the right of the stack, the closet fitting should be a right-hand fitting.
2. If flow in waste line is from the left of the stack, the closet fitting should be a left-hand fitting.
9
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 10
CLOSET CARRIERS
Advantages of Off-The-Floor Plumbing Fixtures
CARRIERS
AESTHETICS
In keeping with the current trends of architectural design toward smooth, uncluttered lines, off-the-floor plumbing fixtures are the necessary practical complement
in toilet and restroom décor. Victorian pedestals and unsightly floor-mounted closets of a bygone year cannot be aesthetically integrated in contemporary designs.
INSTALLATION
Many factors, including cost, material, labor required, space, handling and others must be thoroughly evaluated when planning an installation. With on-the-floor
water closets, slabs must be penetrated and sleeved at each fixture to accommodate waste piping which, in many instances, has to be suspended below the slab.
Such suspended piping requires concealment in multi-story installations, thereby necessitating drop or furred ceilings in the rooms below. The fitting and assembly
of waste piping in such installations, as a rule, must be accomplished on the spot with the aid of scaffolding and extra mechanics, which contributes to high con-
struction costs and affects not only the mechanical contractor but the structural, floor, wall and ceiling mechanics as well.
Conversely, with off-the-floor fixtures, there is no slab penetration in toilet room areas. The support and piping systems are concealed behind the walls. Such sys-
tems are ideally suited to the modern modular plumbing concept as they are readily fabricated either on site or in the contractor’s shop at significant savings over
conventional piece-by-piece assembly. A well planned and executed off-the-floor fixture installation today will provide lasting benefits appreciated by future build-
ing occupants and owners.
10
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 11
CLOSET CARRIERS
Advantages of Off-The-Floor Plumbing Fixtures
CARRIERS
SUPPORT & DRAINAGE SYSTEMS
When JOSAM entered into the manufacturing of off-the-floor plumbing fixture carriers and fittings, extensive research was conducted into the requirements for
support and discharge of these fixtures. From this research, the design of the JOSAM line of carriers and fittings evolved, including such innovations as invertible
carriers to mount either siphon jet or blowout water closets, common vents on back-to-back fittings, dual feet on closet carriers to accommodate all fixture roughing
heights in any floor construction and many others.
Our innovations have been copied, but not equaled, and they paved the way for universal acceptance of this line of products. In the ensuing years, this product
line has been expanded to meet new requirements as they develop in the dynamic construction industry. The result is today’s most comprehensive range of prod-
ucts for off-the-floor plumbing fixture support and drainage.
This type, because of its quiet, efficient, sanitary flushing action, is usually This type is particularly suited to heavy use applications such as public facili-
specified in most commercial, institutional and hotel applications. Water is ties in stadiums and terminals. The flushing action produced by the jet of
introduced into the bowl through the rim and up leg of trap through jets water in the outlet passage is strong for rapid evacuation of the bowl.
placed there to fill the trapway thus creating siphonic action to quickly Fouling problems are minimal. However, because of the powerful flushing
evacuate the bowl. The large water surface in the bowl insures sanitation. action, this type of closet is noisy to operate.
11
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 12
12
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 13
CARRIERS
Page 29 Page 29 Page 30 Page 31 Page 31 Page 31
13
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 14
CLOSET CARRIERS
12000-PF Series CHASE-SAVER® II Features
CARRIERS
JOSAM 12000-PF Series CHASE-SAVER® II Closet Carrier meets the most rigid requirements for securing and supporting water closets. Some of the
many specification and installation features are shown below. CHASE-SAVER® II can be used to mount either siphon jet or blow-out closets by
inverting the carrier body. This carrier was specifically designed for pre-fabricated plumbing systems and exceeds the requirements of American
National Standard ANSI A112.6.1M-1997. Pre-assembled carrier and pylon feet are packed with all the hardware. The extension and fitting are
shipped separately for convenient handling at the fabrication or job site.
FITTING GASKET FIXTURE GASKET
1
Neoprene gasket with raised "O" ring beads on JIFFEE-SEAL Neoprene Gasket fits all closet
both sides provides a positive watertight seal gasket recesses.
between fitting and carrier.
BOWL STABILIZER BACK UP WASHERS
PYLON FEET Provide gripping power necessary to prevent
Heavy-duty cast iron, compact, invertible (same water closet from settling out of installed
foot both sides – no rights and lefts) outboard location over a long period of time.
side mount for easy access to all assembly
hardware, with "Wrap around" carrier retaining HARDWARE
3
channel (1) which "locks" foot to carrier with Zincbrite plating protects all hardware and cap
2
only one bolt (2). Each foot requires only one 4 nuts are finished in chrome.
floor anchor bolt and has additional ADJUSTABLE EXTENSION
"convenience" slots (3) for securing pre-fab High strength ABS plastic with built-in test cap,
transport frames, and pipe supports, incorporates assembled to carrier body with positive taper
handy elevation scale (4) divided in 1/2" threads, easily cut to desired length. Furnished
increments on front to permit roughing-in at 7" long standard for 1" minimum to 5-1/2"
a glance, extends only 3/4" in front of maximum dimension, and 12" long (specify -10
carrier with flat vertical face and 13-3/4" Option) for 10-1/2" maximum dimension.
height accommodates either standard or
high rough mounting.
CARRIER BODY
ANCHOR FOOT Heavy-duty cast iron, compact, invertible for positive support of siphon jet or
Cast iron, rotatable, secured to back of fitting by 3
blow-out closets, with break-off tabs for rough-in less than standard 5-1/2",
means of fully threaded rod for complete at the base (in siphon jet position), accommodates complete range of rough-
adjustment, provides the final link in the 3 point in heights in two models, one (standard) for 4-1/2" through 6" and the other
support system for ultimate stability of the for higher rough, bolts directly to fitting. Bolt securing standard, stud
installation. securing is optional.
14
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 15
CLOSET CARRIERS
12000-OR Series CHASE-SAVER® II Features
CARRIERS
JOSAM 12000-OR Series CHASE-SAVER® II Closet Carrier meets the most rigid requirements for securing and supporting water closets. Some of
the many specification and installation features are shown below. CHASE-SAVER® II can be used to mount either siphon jet or blow-out closets by
inverting the carrier body. This carrier was specifically designed for pre-fabricated plumbing systems and exceeds the requirements of American
National Standard ANSI A112.6.1M-1997. Pre-assembled carrier and pylon feet are packed with all the hardware. The extension and fitting are
shipped separately for convenient handling at the fabrication or job site.
FITTING GASKET 1 FIXTURE GASKET
Neoprene gasket with raised "O" ring beads on JIFFEE-SEAL Neoprene Gasket fits all closet gas-
both sides provides a positive watertight seal ket recesses.
between fitting and carrier.
BOWL STABILIZER BACK UP WASHERS
PYLON FEET Provide gripping power necessary to prevent
Heavy-duty cast iron, compact, invertible (same water closet from settling out of installed
foot both sides – no rights and lefts) outboard location over a long period of time.
side mount for easy access to all assembly hard-
ware, with "Wrap around" carrier retaining HARDWARE
4
channel (1) which "locks" foot to carrier with 3 Zincbrite plating protects all hardware and cap
only one bolt (2). Each foot requires only one nuts are finished in chrome.
floor anchor bolt and has additional "conven- ADJUSTABLE EXTENSION
ience" slots (3) for securing pre-fab transport Threaded high strength ABS plastic with built-in
frames, and pipe supports, incorporates handy test cap, assembled to carrier body and o-ring
elevation scale (4) divided in 1/2" increments to form a gas and watertight seal. Furnished 6"
on front to permit roughing-in at a glance, long standard, easily cut for 1" minimum to 5-
2
extends only 3/4" in front of carrier with flat 1/2" maximum dimension. For 12" long exten-
vertical face and 13-3/4" height accommodates sion (specify -10 Option) for 10-1/2" maximum
either standard or high rough mounting. dimension.
CARRIER BODY
ANCHOR FOOT Heavy-duty cast iron, compact, integral o-ring sealing connection, invertible for
Cast iron, rotatable, secured to back of fitting by 3
positive support of siphon jet or blow-out closets, with break-off tabs for
means of fully threaded rod for complete adjust- rough-in less than standard 5-1/2", at the base (in siphon jet position), accom-
ment, provides the final link in the 3 point support modates complete range of rough-in heights in two models, one (standard) for
system for ultimate stability of the installation. 4-1/2" through 6" and the other for higher rough, bolts directly to fitting. Bolt
securing standard, stud securing optional.
15
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 16
CLOSET CARRIERS
-32 WIDE CHASE CARRIER Features
CARRIERS
JOSAM -32 Wide Chase Carrier is universal for all applications in any type of construction, providing positive support for either siphon jet or
blowout off-the-floor closets whether construction involves monolithic floors, minimum or maximum floor fills and high or low roughing. The carri-
er assembly, separate from the fitting and face plate assembly, is ideally suited for installation in wide chases as it can be positioned in or immedi-
ately behind the wall where the closet support should be, regardless of stack or drainage line location. The –32 Carrier comes from the factory
shrink wrapped and partially assembled for convenient storage until required for use with any JOSAM adjustable fitting and face plate assembly.
16
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 17
CLOSET CARRIERS
12000 Series Minimum Dimensions
CARRIERS
Carrier shown in Siphon Jet Position
Carrier shown in Blowout Position r FOR DIM. SHORTER THAN 5-1/2" (1" MIN.), CUT EXT.
FOR LONGER EXT. (10-1/2" MAX.), SPECIFY -10 OPTION.
-32 Option Minimum Dimensions * FOR DIM. GREATER THAN 12-1/2", SPECIFY 12000-M1358.
17
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 18
CLOSET CARRIERS
Nipple Selection
CARRIERS
The key to pipe chase width adaptability of the -32 Wide Chase -32 OPTION RECOMMENDED
Carriers and the component that makes them universal for all LENGTH NIPPLES (BY OTHERS) NIPPLE LENGTH DRAWING
installation conditions is the 4 inch NPT nipple that connects the A* Length Nipple CL
coupling of the carrier assembly to the adjustable fitting faceplate. Minimum Chase to Use
This nipple is furnished by others, and the recommended length can 9-1/4 2-7/8
be determined by using the chart below. 10-1/4 4
11-1/4 5
To provide proper fixture support, the carrier should be set directly 12-1/4 6
behind or within the wall. To accomplish this in wide pipe chases 13-1/4 7
with DWV piping either centered or offset, it is necessary to 14-1/4 8
separate carrier and drainage fitting as required with nipples that 15-1/4 9
are longer than 2-7/8." The minimum dimension (A*) was 16-1/4 10
determined using a 2-7/8" length nipple. Nipples ranging in length 17-1/4 11
from 2-7/8" to 12" in 1 inch increments are identified on this page 18-1/4 12
for specification when such construction conditions are encountered.
Recommended Pipe: 4” Galvanized Steel
Installation of back-to-back 12000-PF Series Carrier showing min- Installation of 12000-PF Series Carrier in a standard 12"
imum extension. wide pipe chase showing minimum extension.
15964 SERIES SHOWN IN A TYPICAL ROOM BACK DISCHARGE TOILET FACILITY 15984 DOUBLE WASTE VERTICAL FITTING SHOWN INSTALLED IN A TYPICAL
ROOM BOTTOM DISCHARGE TOILET FACILITY LAYOUT
18
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 19
CLOSET CARRIERS
Bowl To Carrier Installation
CARRIERS
To set bowl using finished hardware group "FH," put a
hex nut, back-up washer, and a bowl stabilizer on each
mounting stud.
Adjust with front of back-up nut and washer at finished
wall line.
If the back-up nut and washer are moved to clear
irregularities in the finished wall, the extension MUST be
adjusted an equal amount.
Place fixture gasket in toilet outlet and hang
closet. Assemble fiber washers and JOSAM cap nuts to
two studs on the center line of the closet outlet and one
other stud below and tighten with a wrench.
Assemble fiber washer and JOSAM cap nut to remaining
stud, hand tighten and take 1/2 turn with a wrench. FH Hardware Part #: 565985T
Mounting Stud and Back-up Nut
not included in FH Hardware Kit.
Extension Length Determination
This is a side view. The enlarged inset shows the depth of the gasket within the groove of the fixture and the extension with proper
pressure on the gasket.
When the closet is installed on the carrier, the front end of the extension must be located properly in order to compress the gasket enough
so that the gasket's adhesive coated surfaces are in contact with the china and the face of the extension. This will help ensure a tight seal.
For closets which have a groove with a rectangular cross-section, Use this formula: C = A + B - 1/2"
19
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 20
CLOSET CARRIERS
Adjustable Closet Carrier Options
CARRIERS
The options shown below illustrate and explain various optional carrier components. These options must be specified and installed when the type
of closet or installation dictates their use.
(-1) OPTION, TRU-SET POSITIONING FRAME (Siphon Jet Closets Only)
Made of high impact polystyrene, the TRU-SET Positioning Frame offers many
advantages to the plumbing contractor. The positioning frame is mounted on
the carrier studs at the time the carrier is being installed, thus it acts as a
guide and template, eliminating problems caused by normal dimensional
variations when the wall is being erected. Studs and adjustable extension are
set to the frame, eliminating further adjustment when the fixture is being
hung. Chances of bowl breakage are minimized since bowl is held the cor-
rect distance from finished wall.
NOTE: Sold only with JOSAM closet carriers.
ILLUSTRATION A ILLUSTRATION B
20
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 21
CLOSET CARRIERS
Closet Carrier Position Chart for Wheelchair Facilities
CARRIERS
EXPLANATION AND USE OF CHART
The chart represents solutions for nine separate applications, each line being the solution for a different application. Notice that for every application,
there is a solution using only standard carriers. Use of the 12000-35 carrier can be avoided in most situations. Column 1 represents a fixture mounted
on a vertical stack fitting. Columns 2 through 8 represent the locations of additional fixtures mounted on horizontal fittings. Each column is divided
into three sub-columns, identified as A, B, and C. The ●, ● and p symbols show the types of carriers that can be used for either normal or high
rough in that particular location. Blank spaces mean that the carrier cannot be used in that location. The far right-hand column shows the slope or
pitch per foot of the horizontal drain line to the stack. Notice that lines 5 and 6 show a slope of 1/4 in. per foot. The chart applies to
either siphon jet or blowout fixtures, and should eliminate confusion about installations for the physically disabled.
Carriers ● and p are required for back-to-back mounting when one fixture is normal rough and the other is high rough.
EXAMPLE:
A. Requirement: Plans call for rest rooms back-to-back, each with six water closets, one of which is to be high rough.
B. Solution: Because six fixtures are involved, refer to column 6, line 7. Note that a standard 12000 Carrier [sub-column B] can be used for the
high rough fixture at the upstream end of the branch. The remaining five fixtures, all at normal rough, can be mounted on standard 12000 Carriers
as shown in columns 1 through 5, sub-columns A.
Note that the standard 12000 Carrier can be used in a high rough position at the stack or at the upstream end of the horizontal branch,
depending on the number of closets required, as shown in sub-columns B. Either of these locations is preferred for the high rough water closet.
Thus, for most installations, the standard 12000 Carrier is suitable. However, if the high rough water closet cannot be so located, the
12000-35 high rough Carrier can be used in almost any location, depending on the number of closets required. In this case it may be necessary to
increase the horizontal spacing between locations to some distance greater than 36 inches. If so, the above chart is no longer applicable.
Furthermore, whenever the fixture arrangement for back-to-back water closets requires high rough on one side and normal rough on the other
side, the 12000-35 Carrier must be used on the high rough side.
For unusual requirements not covered by this chart, we suggest you contact your JOSAM Representative.
*NOTE: Even though specific construction requirements for the physically disabled may vary from one jurisdiction to another, those specified in American National Standard ANSI
A117.1-1980 are generally accepted. In this standard, Section 4, Paragraph 4.16.3 states that the height of water closets shall be 17 to 19 in. to the top of the seat. This confirms
the water closet rim height of 18 in. for the physically disabled, previously established in ANSI A112.19.2, which is a standard for vitreous China plumbing fixtures. In compliance
with these standards, the above selection chart has been developed using a 3 in. difference in elevation between normal rough fixtures [15 in. rim height] and high rough fixtures
[18 in. rim height].
21
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 22
CLOSET CARRIERS
Wheelchair Closet Carrier Installations
CARRIERS
Accommodations for the physically disabled who depend on wheelchairs for mobility are of prime importance and should be included in any build-
ing where public toilet facilities are provided. Off-the-floor water closets are ideally suited for wheelchair use. In addition to the sanitation benefits,
the elevation is not fixed as it is with the floor-mounted closets. By utilizing the JOSAM line of carriers and fittings, the wheelchair closet can be
located anywhere in a battery. See Carrier Selection Chart. The illustrations below show the wheelchair closet in various locations.
The above shows an installation utilizing a JOSAM vertical The above shows an installation utilizing a standard JOSAM stack fit-
fitting and carrier and a horizontal waste line with fittings and ting with the carrier on this fitting roughed for wheelchair use. With
carriers. The horizontal fitting and carrier on the end show the this installation one to three horizontal fittings can be
(-35) high rough for wheelchair use. connected to the stack fitting.
22
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 23
CLOSET CARRIERS
11001 SERIES CARRIER WITH PIPE ADAPTER
APPLICATION
For wall-hung water closets where carrier fitting is not required.
SPECIFICATION
JOSAM 11001 Series coated cast iron universal pipe grip Closet Carrier with 4” pipe
adapter, adjustable feet and finish hardware and trim to support siphon jet or blow-
CARRIERS
out wall-hung water closet. Waste piping and fitting provided by others.
38 LBS.
SPECIFICATION
JOSAM 11007 and 11008 Series coated cast iron universal pipe grip Closet Carrier
with 3” or 4” copper pipe adapter, adjustable feet and finish hardware and trim to
support siphon jet or blow-out wall-hung water closet. Waste piping and fitting pro-
vided by others.
38 LBS.
23
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 24
CLOSET CARRIERS
HORIZONTAL 4” NO-HUB, ADJUSTABLE, SINGLE
For use with Siphon Jet or Blowout Closets in No-Hub piping systems where single adjustable fitting with
12674 & 12684 APPLICATION:
horizontal flow is desired.
60 LBS.
HORIZONTAL 4” NO-HUB, ADJUSTABLE, BACK-TO-BACK
For use with Siphon Jet or Blowout Closets in No-Hub piping systems where back-to-back adjustable fitting
12694 APPLICATION:
with horizontal flow is desired.
Back-to-Back
100 LBS.
OPTIONS & NOTES
–PF Pylon Foot, Std. –10 ABS Extension, through 10-1/2" Wall
–OR O-Ring Carrier –24 Carrier for Floor-Mounted, Back-Outlet China Bowls
–SD Special-Duty 500 lb. Carrier –30 Cast Iron Adjustable Extension with Connector
▼ –HS Hub & Spigot –30–2 Cast Iron Adjustable Extension with Connector and Test Cap
–AUX Auxiliary Inlet, 2” –32 Carrier for Wide Chase Installations
–VP Vandal-Proof Trim –35 Closet Carrier for Wheelchair High Rough
–1 Positioning Frame ▼ –58 Horizontal No-Hub Cast Long Barrel
–6 Supply Pipe Support (Specify Type of Pipe)
■ RECOMMENDED ALL FEET BE SECURED TO FLOOR DIM. SHOWN IS FOR SIPHON JET. BLOWOUT IS: FOR ROUGHING OVER 6" FOR SIPHON JET OR 12- r FOR DIM. SHORTER THAN 5-1/2" (1" MIN.) CUT EXT.
WITH 1/2” BOLTS AND ANCHORS BY OTHERS. 11" MIN. & 16-1/2" MAX. 2” MIN. & 4” MAX. 1/2" FOR BLOWOUT, SPECIFY ON ORDER. SPECIFY –10 FOR LONGER EXT. (10-1/2" MAX.)
CLOSET CARRIERS
12674-HS SERIES 12684-HS SERIES
Single, Left-Hand, Hub & Spigot Single, Right-Hand, Hub & Spigot
CARRIERS
65 LBS. 65 LBS.
12694-HS SERIES 12674-58 SERIES Long Barrel
Back-to-Back, Hub & Spigot Single, Left-Hand, No-Hub
■ RECOMMENDED ALL FEET BE SECURED TO FLOOR WITH 1/2” BOLTS AND ANCHORS BY OTHERS. r FOR DIM. SHORTER THAN 5-1/2" (1" MIN.) CUT EXT. SPECIFY –10 FOR LONGER EXT. (10-1/2" MAX.) 25
Closet Carriers_08.qxd 3/27/08 8:56 AM Page 26
CLOSET CARRIERS
VERTICAL 4” NO-HUB, ADJUSTABLE, SINGLE
For use with Siphon Jet or Blowout Closets in No-Hub piping systems where back-to-back adjustable fitting with
12704 APPLICATION:
vertical flow is desired.
OPTIONS
–PF Pylon Foot, Std. –6 Supply Pipe Support (Specify Type of Pipe)
–OR O-Ring Carrier –10 ABS Extension, through 10-1/2" Wall
–SD Special-Duty 500 lb. Carrier –24 Carrier for Floor-Mounted, Back-Outlet China Bowls
▼ –HS Hub & Spigot –30 Cast Iron Adjustable Extension with Connector
▼ –LH4 Left-Hand 4" No-Hub Branch –30–2 Cast Iron Adjustable Extension with Connector and Test Cap
▼ –HLH4 Left-Hand 4" Hub Branch –32 Carrier for Wide Chase Installations
▼ –RH4 Right-Hand 4" No-Hub Branch –35 Closet Carrier for Wheelchair High Rough
▼ –HRH4 Right-Hand 4" Hub Branch –49 No-Hub High Auxiliary Inlet, Under Vent
▼ –D4 Double 4" No-Hub Branches –50 No-Hub High Auxiliary Inlet, Opposite Vent
▼ –HD4 Double 4" Hub Branches –53 Threaded High Auxiliary Inlet, Under Vent
–VP Vandal-Proof Trim –54 Threaded High Auxiliary Inlet, Opposite Vent
–1 Positioning Frame
■ RECOMMENDED ALL FEET BE SECURED TO FLOOR DIM. SHOWN IS FOR SIPHON JET. BLOWOUT IS: FOR ROUGHING OVER 6" FOR SIPHON JET OR 12- r FOR DIM. SHORTER THAN 5-1/2" (1" MIN.) CUT EXT.
WITH 1/2” BOLTS AND ANCHORS BY OTHERS. 11" MIN. & 16-1/2" MAX. 1/2" FOR BLOWOUT, SPECIFY ON ORDER. SPECIFY –10 FOR LONGER EXT. (10-1/2" MAX.)
CLOSET CARRIERS
12704-HS-HLH4 SERIES 12704-RH4 SERIES
Single, Left-Hand Branch, Left-Hand 2” Vent Single, Right-Hand 4” Branch, Left-Hand 2” Vent
CARRIERS
84 LBS. OPTIONS N/A: -49, -53 71 LBS. OPTIONS N/A: -50, -54
84 LBS. OPTIONS N/A: -50, -54 70 LBS. OPTIONS N/A: -49, -50, -53, -54
12704-HS-HD4 SERIES
Single, Two 4” Branches, Left-Hand 2” Vent
n RECOMMENDED ALL FEET BE SECURED TO FLOOR WITH 1/2” BOLTS AND ANCHORS BY OTHERS. r FOR DIM. SHORTER THAN 5-1/2" (1" MIN.) CUT EXT. SPECIFY –10 FOR LONGER EXT. (10-1/2" MAX.) 27
Closet Carriers_08.qxd 4/28/08 12:05 PM Page 28
CLOSET CARRIERS
VERTICAL 4” NO-HUB, ADJUSTABLE, SINGLE
For use with Siphon Jet or Blowout Closets in No-Hub piping systems where single adjustable fitting with
12714 APPLICATION:
vertical flow is desired.
72 LBS.
OPTIONS
–PF Pylon Foot, Std. –6 Supply Pipe Support (Specify Type of Pipe)
–OR O-Ring Carrier –10 ABS Extension, through 10-1/2" Wall
–SD Special-Duty 500 lb. Carrier –24 Carrier for Floor-Mounted, Back-Outlet China Bowls
▼ –HS Hub & Spigot –30 Cast Iron Adjustable Extension with Connector
▼ –LH4 Left-Hand 4" No-Hub Branch –30–2 Cast Iron Adjustable Extension with Connector and Test Cap
▼ –HLH4 Left-Hand 4" Hub Branch –32 Carrier for Wide Chase Installations
▼ –RH4 Right-Hand 4" No-Hub Branch –35 Closet Carrier for Wheelchair High Rough
▼ –HRH4 Right-Hand 4" Hub Branch –49 No-Hub High Auxiliary Inlet, Under Vent
▼ –D4 Double 4" No-Hub Branches –50 No-Hub High Auxiliary Inlet, Opposite Vent
▼ –HD4 Double 4" Hub Branches –53 Threaded High Auxiliary Inlet, Under Vent
–VP Vandal-Proof Trim –54 Threaded High Auxiliary Inlet, Opposite Vent
–1 Positioning Frame
83 LBS. OPTIONS N/A: -LH4, -RH4, D4 71 LBS. OPTIONS N/A: -49, -53
■ RECOMMENDED ALL FEET BE SECURED TO FLOOR DIM. SHOWN IS FOR SIPHON JET. BLOWOUT IS: FOR ROUGHING OVER 6" FOR SIPHON JET OR 12- r FOR DIM. SHORTER THAN 5-1/2" (1" MIN.) CUT EXT.
WITH 1/2” BOLTS AND ANCHORS BY OTHERS. 11" MIN. & 16-1/2" MAX. 1/2" FOR BLOWOUT, SPECIFY ON ORDER. SPECIFY –10 FOR LONGER EXT. (10-1/2" MAX.)
CLOSET CARRIERS
12714-HS-HRH4 SERIES 12714-LH4 SERIES
Single, Right-Hand Branch, Right-Hand 2" Vent Single, Left-Hand 4"Branch, Right-Hand 2" Vent
CARRIERS
84 LBS. OPTIONS N/A: -49, -53 71 LBS. OPTIONS N/A: -50, -54
84 LBS. OPTIONS N/A: -50, -54 70 LBS. OPTIONS N/A: -49, -50, -53, -54
12714-HS-HD4 SERIES
Single, Two 4" Branches, Right-Hand 2" Vent
■ RECOMMENDED ALL FEET BE SECURED TO FLOOR WITH 1/2” BOLTS AND ANCHORS BY OTHERS. r FOR DIM. SHORTER THAN 5-1/2" (1" MIN.) CUT EXT. SPECIFY –10 FOR LONGER EXT. (10-1/2" MAX.) 29
Closet Carriers_08.qxd 3/27/08 8:57 AM Page 30
CLOSET CARRIERS
VERTICAL 4” NO-HUB, ADJUSTABLE, BACK-TO-BACK
For use with Siphon Jet or Blowout Closets in No-Hub piping systems where back-to-back adjustable fitting
12724 APPLICATION:
with vertical flow is desired.
■ RECOMMENDED ALL FEET BE SECURED TO FLOOR DIM. SHOWN IS FOR SIPHON JET. BLOWOUT IS: FOR ROUGHING OVER 6" FOR SIPHON JET OR 12- r FOR DIM. SHORTER THAN 5-1/2" (1" MIN.) CUT EXT.
WITH 1/2” BOLTS AND ANCHORS BY OTHERS. 11" MIN. & 16-1/2" MAX. 1/2" FOR BLOWOUT, SPECIFY ON ORDER. SPECIFY –10 FOR LONGER EXT. (10-1/2" MAX.)
CLOSET CARRIERS
12724-HS SERIES 12724-VS4 SERIES
Back-to-Back, 2" Vent Back-to-Back, 4" Branch, 2" Vent Same Side
CARRIERS
129 LBS. OPTIONS N/A: -D4, -VS4, -OS4 116 LBS. OPTIONS N/A: -49, -53
116 LBS. OPTIONS N/A: -50, -54 118 LBS. OPTIONS N/A: -49, -53
115 LBS. OPTIONS N/A: -49, -50, -53, -54 131 LBS. OPTIONS N/A: -49, -50, -53, -54
r FOR DIM. SHORTER THAN 5-1/2" (1" MIN.) CUT EXT. SPECIFY –10 FOR LONGER EXT. (10-1/2" MAX.)
31
Closet Carriers_08.qxd 4/30/08 8:56 AM Page 32
CLOSET CARRIERS
VERTICAL 4” HUB & SPIGOT, CLOSE, SINGLE
For use with Siphon Jet or Blowout Closets in Hub and Spigot piping systems where single compact offset
14004 & 14024 APPLICATION:
fitting with vertical flow is desired.
70 LBS.
VERTICAL 4” HUB & SPIGOT, CLOSE, BACK-TO-BACK
For use with Siphon Jet or Blowout Closets in Hub and Spigot piping systems where back-to-back compact
14044 APPLICATION:
offset fitting with vertical flow is desired.
120 LBS.
OPTIONS & NOTES
–VP Vandal-Proof Trim
–1 Positioning Frame
–6 Supply Pipe Support (Specify Type of Pipe)
–21 Hanger Type Closet Adapter
–54 Threaded Auxiliary Inlet, Opposite Vent
■ RECOMMENDED ALL FEET BE SECURED TO FLOOR DIM. SHOWN IS FOR SIPHON JET. BLOWOUT IS: FOR ROUGHING OVER 6" FOR SIPHON JET OR 12- r FOR DIM. SHORTER THAN 3-3/4" (1" MIN.) CUT EXT.
WITH 1/2” BOLTS AND ANCHORS BY OTHERS. 11" MIN. & 16-1/2" MAX. 1/2" FOR BLOWOUT, SPECIFY ON ORDER.
32
Closet Carriers_08.qxd 4/28/08 12:06 PM Page 33
CLOSET CARRIERS
VERTICAL 4” HUB & SPIGOT, CLOSE, SINGLE
For use with Siphon Jet or Blowout Closets in Hub and Spigot piping systems where single compact on-stack
14064 APPLICATION:
fitting with 4" vent and vertical flow is desired.
CARRIERS
63 LBS.
VERTICAL 4” HUB & SPIGOT, CLOSE, SINGLE
For use with Siphon Jet or Blowout Closets in Hub and Spigot piping systems where single compact on-stack
14104 APPLICATION:
fitting with 2" vent and vertical flow is desired.
60 LBS.
OPTIONS & NOTES
–SD Special Duty 500 lb. Carrier
–VP Vandal-Proof Trim
–1 Positioning Frame
–6 Supply Pipe Support (Specify Type of Pipe)
–45 Threaded Left-Hand Auxiliary Inlet
–46 Threaded Right-Hand Auxiliary Inlet
■ RECOMMENDED ALL FEET BE SECURED TO FLOOR DIM. SHOWN IS FOR SIPHON JET. BLOWOUT IS: FOR ROUGHING OVER 6" FOR SIPHON JET OR r FOR DIM. SHORTER THAN 5-1/2" (1" MIN.) CUT EXT.
WITH 1/2” BOLTS AND ANCHORS BY OTHERS. 11" MIN. & 16-1/2" MAX. 12-1/2" FOR BLOWOUT, SPECIFY ON ORDER.
33
Closet Carriers_08.qxd 4/18/08 1:09 PM Page 34
CLOSET CARRIERS
VERTICAL 4” NO-HUB, CLOSE, SINGLE
For use with Siphon Jet or Blowout Closets in No-Hub piping systems where single compact offset fitting
14404 & 14424 APPLICATION:
with 2"auxiliary inlet vertical flow is desired.
60 LBS.
VERTICAL 4” NO-HUB, CLOSE, BACK-TO-BACK
For use with Siphon Jet or Blowout Closets in No-Hub piping systems where back-to-back compact offset
14444 APPLICATION:
fitting with 2" auxiliary inlet vertical flow is desired.
90 LBS.
OPTIONS & NOTES
–SD Special Duty 500 lb. Carrier –24 Carrier for Floor-Mounted, Back-Outlet China Bowls
–VP Vandal-Proof Trim –30 Cast Iron Adjustable Extension with Connector
–1 Positioning Frame –30–2 Cast Iron Adjustable Extension with Connector and Test Cap Assembly
–6 Supply Pipe Support (Specify Type of Pipe) –50 No-Hub High Auxiliary Inlet, Opposite Vent
–10 ABS Extension, through 10-1/2" Wall –54 Threaded High Auxiliary Inlet, Opposite Vent
■ RECOMMENDED ALL FEET BE SECURED TO FLOOR DIM. SHOWN IS FOR SIPHON JET. BLOWOUT IS: FOR ROUGHING OVER 6" FOR SIPHON JET OR r FOR DIM. SHORTER THAN 5-1/2" (1" MIN.) CUT EXT.
WITH 1/2” BOLTS AND ANCHORS BY OTHERS. 11" MIN. & 16-1/2" MAX. 12-1/2" FOR BLOWOUT, SPECIFY ON ORDER. SPECIFY –10 FOR LONGER EXT. (10-1/2" MAX.)
34
Closet Carriers_08.qxd 4/28/08 12:06 PM Page 35
CLOSET CARRIERS
VERTICAL 4” NO-HUB, CLOSE, SINGLE
For use with Siphon Jet or Blowout Closets in No-Hub piping systems where single compact on-stack fitting
14464 APPLICATION:
with 4" vent and vertical flow is desired.
CARRIERS
52 LBS.
VERTICAL 4” NO-HUB, CLOSE, BACK-TO-BACK
For use with Siphon Jet Closets in No-Hub piping systems where back-to-back compact on-stack fitting with
14484 APPLICATION:
vertical flow is desired.
82 LBS.
OPTIONS & NOTES
–SD Special Duty 500 lb. Carrier –24 Carrier for Floor-Mounted, Back-Outlet China Bowls
–VP Vandal-Proof Trim –30 Cast Iron Adjustable Extension with Connector
–1 Positioning Frame –30–2 Cast Iron Adjustable Extension with Connector and Test Cap Assembly
–6 Supply Pipe Support (Specify Type of Pipe) –45 Threaded Left-Hand Auxiliary Inlet
–10 ABS Extension, through 10-1/2" Wall –46 Threaded Right-Hand Auxiliary Inlet
■ RECOMMENDED ALL FEET BE SECURED TO FLOOR DIM. SHOWN IS FOR SIPHON JET. BLOWOUT IS: FOR ROUGHING OVER 6" FOR SIPHON JET OR r FOR DIM. SHORTER THAN 5-1/2" (1" MIN.) CUT EXT.
WITH 1/2” BOLTS AND ANCHORS BY OTHERS. 11" MIN. & 16-1/2" MAX. 12-1/2" FOR BLOWOUT, SPECIFY ON ORDER. SPECIFY –10 FOR LONGER EXT. (10-1/2" MAX.)
35
Closet Carriers_08.qxd 4/18/08 1:09 PM Page 36
CLOSET CARRIERS
VERTICAL 4” NO-HUB, CLOSE, SINGLE
For use with Siphon Jet or Blowout Closets in No-Hub piping systems where single compact on-stack fitting
14504 APPLICATION:
with 2" vent and vertical flow is desired.
82 LBS.
■ RECOMMENDED ALL FEET BE SECURED TO FLOOR DIM. SHOWN IS FOR SIPHON JET. BLOWOUT IS: FOR ROUGHING OVER 6" FOR SIPHON JET OR r FOR DIM. SHORTER THAN 5-1/2" (1" MIN.) CUT EXT.
WITH 1/2” BOLTS AND ANCHORS BY OTHERS. 11" MIN. & 16-1/2" MAX. 12-1/2" FOR BLOWOUT, SPECIFY ON ORDER. SPECIFY –10 FOR LONGER EXT. (10-1/2" MAX.)
36
Closet Carriers_08.qxd 3/27/08 8:57 AM Page 37
CLOSET CARRIERS
VERTICAL NO-HUB, 90° INSTITUTIONAL FITTING
For use with Siphon Jet or Blowout Closets in No-Hub piping systems where 90-degree double waste fitting
APPLICATION:
with vent, auxiliary inlet and vertical flow is desired such as in prisons.
15964 JOSAM 15964 Series coated cast iron vertical 4" no-hub double waste 90º Stack Fitting with 4" closet
SPECIFICATION: branches, 2" no-hub vent, with close closet carriers invertible for siphon jet or blowout closets, ABS extensions
CARRIERS
with integral test caps, buttress feet, plated hardware and fixture gaskets.
90 LBS.
VERTICAL NO-HUB, 90° INSTITUTIONAL FITTING
For use with Siphon Jet or Blowout Closets in No-Hub piping systems where 90-degree double waste fitting
APPLICATION:
with vent, auxiliary inlet and vertical flow is desired such as in prisons. Fitting only, carrier trim by others.
15984
JOSAM 15984 Series coated cast iron vertical 4" no-hub double waste 90º Stack Fitting with 4" no-hub
SPECIFICATION:
closet branches and 2" no-hub vent.
26 LBS.
OPTIONS & NOTES
APPLICATIONS SERIES APPLICATIONS SERIES
15964 15984 15964 15984
–VP Vandal-Proof Trim X – –26 Fitting Anchor Foot X X
–1 Positioning Frame X – –30 Cast Iron Adjustable Extension with Connector X –
–6 Supply Pipe Support (Specify Type of Pipe) X – –30–2 Cast Iron Adjustable Ext. w/Connector & Test Cap Assy. X –
–10 ABS Extension, through 10-1/2" Wall X – –49 No-Hub High Auxiliary Inlet, Under Vent X X
–24 Carrier for Floor-Mounted, Back-Outlet China Bowls X – –54 Threaded High Auxiliary Inlet, Opposite Vent X X
■ RECOMMENDED ALL FEET BE SECURED TO FLOOR DIM. SHOWN IS FOR SIPHON JET. BLOWOUT IS: rFOR DIM. SHORTER THAN 5-1/2" (1-3/4" MIN.) CUT
WITH 1/2” BOLTS AND ANCHORS BY OTHERS. 11" MIN. & 16-1/2" MAX. EXT. SPECIFY –10 FOR LONGER EXT. (10-1/2" MAX.)
37
Closet Carriers_08.qxd 3/27/08 8:57 AM Page 38
CLOSET CARRIERS
FLOOR-MOUNT, PVC ADAPTER TYPE
For use with Siphon Jet Closets only in PVC piping systems where a single compact carrier with vertical flow
APPLICATION:
is desired and a 3" PVC fitting is to be furnished by others.
16123
JOSAM 16123 Series coated cast iron single Commercial Closet Carrier and 3" PVC plastic fitting adapter
SPECIFICATION:
with extension and chrome plated trim.
CARRIERS
Single Fitting, On Stack, Adapter Type for PVC Plastic Pipe for Siphon Jet Closets Only
35 LBS.
RECOMMENDED ALL FEET BE SECURED TO FLOOR r THIS CARRIER CAN ALSO BE USED WITH A 4 X 4 X 3 TEE.
WITH 1/2” BOLTS AND ANCHORS BY OTHERS.
38
Fixture Carriers 08.qxd 3/27/08 11:46 AM Page 39
FIXTURE CARRIERS
How To Order Lavatory Carriers
To order specify Series Number and use suffix numbers to indicate desired options.
CARRIERS
EXAMPLE: Concealed Arm Carrier Series No. 17100
17100 -10 -75
Series No.
Option, Extension Sleeves Longer than Standard
Option, 2" Chrome-Plated Escutcheons, 2 Per Fixture
Series No.
Option, Vandal-Proof Trim
Option, Hardware for Thicker Walls
1. Quantity.
SINK
For supporting sinks or slab shelves. 2. JOSAM series number.
CARRIERS
3. Fixture manufacturer, model number, name of fixture and size.
1. Quantity.
URINAL
For supporting off-the-floor urinals. 2. JOSAM series number.
CARRIERS
3. Fixture manufacturer and model number.
1. Quantity.
WATER COOLER
For supporting off-the-floor water coolers. 2. JOSAM series number.
CARRIERS
3. Fixture manufacturer and model number.
1. Quantity.
HOSPITAL FIXTURE For supporting hospital sinks or 2. JOSAM series number.
CARRIERS lavatories with knee action valves. 3. Fixture manufacturer, model number, name of fixture and size.
4. Knee action valve, if used, give manufacturer and model number.
39
Fixture Carriers 08.qxd 3/27/08 11:46 AM Page 40
40
Fixture Carriers 08.qxd 3/27/08 11:46 AM Page 41
CARRIERS
Page 58 Page 58 Page 59 Page 59 Page 45
41
Fixture Carriers 08.qxd 3/27/08 11:46 AM Page 42
FIXTURE CARRIERS
Concealed Arms UNITRON® II Features
CARRIERS
JOSAM concealed arm Lavatory Carriers secure and support lavatories by means of cast iron arms with leveling and securing devices. By
virtue of their design, they accommodate all types of lavatories punched for concealed arms. The cast iron arms are furnished as standard
in three different lengths. The leveling and securing methods are the same for each arm length. After the carrier is installed and the walls
completed, the sleeve and arm assembly is adjusted and installation of the lavatory is made by sliding it over the arms, leveling it through
the access holes provided and then securely locking it in place with the LAVALOC® Securing Device.
HEAVY-DUTY INVERTIBLE
HEADERS RECTANGULAR STRUCTURAL
The heavy-duty cast iron UPRIGHTS
invertible headers supplied with Josam has selected heavy-duty
JOSAM floor-mounted carriers structural steel uprights as the
can be installed as shown or standard for floor-mounted
inverted and installed on the carriers. These uprights are
outside of the upright. The tie narrow, for use in drywall
rod is secured in place against construction, yet will support
the upright by the header, more weight than the round
eliminating need for set screws. tubular uprights.
42
Fixture Carriers 08.qxd 3/27/08 11:46 AM Page 43
FIXTURE CARRIERS
Concealed Arms Features
CARRIERS
CONCEALED TYPE LAVATORY CARRIER
1. Tandem keepers in slots on the arm permit positioning of leveling 5. The final setting of the arm out from the wall can be made
screws on the job to suit punchings of any lavatory specified. from the face of the finished wall after the wall is built.
2. Screws in keepers can then easily be moved up or down to level 6. The set screws are easily accessible for quicker adjustment.
the lavatory. 7. Arm with the locking device, tandem keepers, and adjustable
3. The securing lock device is positioned on the arm and tightens sleeve, is completely assembled at the factory.
against the fixture to hold it rigidly in place. 8. Hardware is plated to prevent corrosion.
4. The sleeve can be adjusted to suit various wall thicknesses.
43
Fixture Carriers 08.qxd 3/27/08 11:46 AM Page 44
FIXTURE CARRIERS
Options
The options shown below illustrate and explain various optional carrier components. These options must be specified
CARRIERS
and installed when the type of construction or fixture dictates their use. See specific series for available options.
(-10) OPTION, EXTENSION FOR THICK WALLS (-60) OPTION, VALVE PLATE ON UPRIGHT
This option provides the extension hardware required for mounting allows carriers with uprights to be converted to support both hospital
fixtures when the wall thickness (T Dim.) is greater than the maxi- lavatories and knee or foot operated valves supplying these lavatories.
mum thickness shown on drawing. Specify T Dim. when ordering Valve plate is securely fastened to upright and is supplied with hard-
this option. ware and chrome-plated trim for mounting valve.
(-66) OPTION, SPLIT HEADER FOR STAINLESS STEEL ARMS (-67) OPTION, CONCEALED ARM WHEELCHAIR LAVATORY
In many cases arms are supplied by the manufacturers of stainless steel Most major fixture manufacturers offer an elongated lavatory especially
fixtures. The mounting hole spacing in the back of the arm (Y Dim.) designed for the wheelchair user. This lavatory requires a special type
varies widely by sink and manufacturer. The -66 split header is adjustable carrier which roughs the lavatory higher than normal and also will
to allow for the mounting of this type of sink and arm combination. support the long extension of china.
44
Fixture Carriers 08.qxd 4/29/08 10:42 AM Page 45
FIXTURE CARRIERS
Replacement Assembly Numbers For Concealed Arms
CARRIERS
Description No. Required Part No. Description No. Required Part No.
ARM ASSEMBLIES ESCUTCHEONS
17100-201 Arm Assembly 16.75” 2 Per Fixture 566270 Escutcheon Pack 2" Option –75 1 Pack Per Fixture 566226
17100-202 Arm Assembly 19.5” 2 Per Fixture 566290T Escutcheon Pack 4" Option –76 1 Pack Per Fixture 566222
17100-203 Arm Assembly 22” 2 Per Fixture 566310T
MISCELLANEOUS PARTS
SLEEVE ASSEMBLIES 17100 Fixture Locking Device 1 Per Arm 566262
17100 Sleeve Assembly 4" 2 Per Fixture 566460T 17100 Leveling Device Assembly 2 Per Arm 566263
17100 Sleeve Assembly 6.5" 2 Per Fixture 566340T 17100-201 Hardware Pack 1 Per Fixture 566232T
17100 Sleeve Assembly 8.5" 2 Per Fixture 566510
17100 Sleeve Assembly 10.5" 2 Per Fixture 566350T
Fixed Bracket
2 LBS
45
Fixture Carriers 08.qxd 4/22/08 6:49 PM Page 46
FIXTURE CARRIERS
17100 SERIES FLOOR-MOUNT, Concealed Arms
APPLICATION REUSABLE ALIGNMENT TOOL
AVAILABLE. SEE PAGE 45.
For use with lavatories punched for concealed arms where thin wall construction
demands uprights that support the fixture completely independent of the wall.
SPECIFICATION
CARRIERS
JOSAM 17100 Series floor-mounted single Lavatory Carrier with concealed arms,
leveling and securing screws, structural uprights and welded feet.
Available Options
▼ -BB Back-to-Back Carrier -67 Concealed Arm Carrier for
-10 Extension Sleeves Longer Than Wheelchair Lavatory
Standard, Specify Wall Thickness -75 2" Chrome-Plated Escutcheons
-60 Valve Plate for Attaching -76 4" Chrome-Plated Escutcheons
to Upright -77 6" Chrome-Plated Escutcheons
STD. ADJUSTABLE SLEEVE 6-1/2”
VARIABLE – DEPENDS ON FIXTURE.
RECOMMEND ALL FEET BE SECURED TO FLOOR WITH 1/2" BOLTS
AND ANCHORS BY OTHERS.
43 LBS
SPECIFICATION
JOSAM 17100-BB Series floor-mounted, back-to-back Lavatory Carrier with concealed
arms, leveling and securing screws, structural uprights and welded feet.
Available Options
▼ -BP with Back Plates -75 2" Chrome-Plated Escutcheons
▼ -MMB with Movable Mounting -76 4" Chrome-Plated Escutcheons
Brackets -77 6" Chrome-Plated Escutcheons
▼ -10 Extension Sleeves Longer
Than Standard, Specify
Wall Thickness
VARIABLE
STD. – DEPENDS
ADJUSTABLE SLEEVEON
4”FIXTURE.
STD. ADJUSTABLE
VARIABLE – DEPENDSSLEEVE 4”
ON FIXTURE. 16 LBS
FIXTURE CARRIERS
17120-10 SERIES WALL-MOUNT with -10 Extension Sleeves Longer than Std.
APPLICATION
For use with lavatories punched for concealed arms where wall construction will
support the fixture and carrier assembly.
SPECIFICATION
CARRIERS
JOSAM 17120-10 Series wall-mounted, single Lavatory Carrier with concealed arms,
leveling and securing screws and adjustable wall plate.
SPECIFICATION
JOSAM 17120-BP Series wall-mounted, single Lavatory Carrier with concealed arms,
leveling and securing screws, adjustable wall plate and back plate.
47
Fixture Carriers 08.qxd 4/22/08 6:49 PM Page 48
FIXTURE CARRIERS
17125 SERIES WALL-MOUNT, Concealed Arms
APPLICATION
For use with lavatories punched for concealed arms where wall construction will sup-
port the fixture and carrier assembly.
SPECIFICATION
CARRIERS
JOSAM 17125 Series wall-mounted, single Lavatory Carrier with concealed arms, lev-
eling and securing screws and steel plate for attaching to studs.
Available Options
-10 Extension Sleeves Longer Than Standard, Specify Wall Thickness
-75 2" Chrome-Plated Escutcheons
Available Options
▼ -BB Back-to-Back Carrier
▼ -HD Heavy-Duty
-VP Vandal-Proof Trim
-10 Hardware for Walls Over 4-1⁄2", Specify Wall Thickness
-60 Valve Plate for Attaching to Upright
-66 Split Header for Stainless Steel Arms
FIXTURE CARRIERS
17380-BB SERIES FLOOR-MOUNT, -BB Back-to-Back
APPLICATION REUSABLE ALIGNMENT TOOL
AVAILABLE. SEE PAGE 45.
For use with back-to-back lavatories designed for heavy-duty exposed arms
where thin wall construction demands uprights that support the fixture completely
independent of the wall.
SPECIFICATION
CARRIERS
JOSAM 17380-BB Series floor-mounted, back-to-back Lavatory Carrier with exposed
acid-resisting white coated arms, leveling and securing screws, structural uprights,
welded feet and chrome-plated trim.
OPTION N/A
-66
SPECIFICATION
JOSAM 17380-HD Series floor-mounted, single, heavy-duty Sink Carrier with acid-
resisting white coated arms, leveling and securing screws, structural uprights, welded
feet and chrome-plated trim.
49
Fixture Carriers 08.qxd 4/22/08 6:49 PM Page 50
FIXTURE CARRIERS
17390 SERIES WALL-MOUNT, Exposed Arms
APPLICATION
For use with lavatories designed for heavy-duty exposed arms where wall construction
will support the fixture and carrier assembly.
SPECIFICATION
CARRIERS
JOSAM 17390 Series wall-mounted, single Lavatory Carrier with exposed acid-resist-
ing white coated arms, leveling and securing screws, adjustable wall plate and
chrome-plated trim.
Available Options
▼ -BP with Back Plates
-VP Vandal-Proof Trim
-10 Hardware for Walls Over 4-1/2", Specify Wall Thickness
SPECIFICATION
JOSAM 17390-BP Series wall-mounted, single Lavatory Carrier with exposed acid-
resisting white coated arms, leveling and securing screws, adjustable wall plate, back
plates and chrome-plated trim.
FIXTURE CARRIERS
17405 SERIES WALL-MOUNT, Exposed Arms
APPLICATION
For use with lavatories designed for heavy-duty exposed arms where wall construc-
tion will support the fixture and carrier assembly.
SPECIFICATION
CARRIERS
JOSAM 17405 Series wall-mounted, single Lavatory Carrier with exposed acid-resist-
ing white coated arms, leveling and securing screws, mounting rods for securing to
wall plate by others and chrome-plated trim.
Available Options
-VP Vandal-Proof Trim
-10 Hardware for Walls Over 4", Specify Wall Thickness
51
Fixture Carriers 08.qxd 4/22/08 6:49 PM Page 52
FIXTURE CARRIERS
17550 SERIES FLOOR-MOUNT, Hanger Plate Type
APPLICATION REUSABLE ALIGNMENT TOOL
AVAILABLE. SEE PAGE 45.
For use with lavatories furnished with hangers that require a carrier for support and
where thin wall construction demands uprights that support the fixture completely
independent of the wall.
SPECIFICATION
CARRIERS
JOSAM 17550 Series floor-mounted, single Lavatory Carrier with hanger plate,
adjustable supporting rods, structural uprights and welded feet.
Available Options
▼ -BB Back-to-Back Carrier -10 Hardware for Walls over 4”,
▼ -CL Corner Lavatory Carrier Specify Wall Thickness
▼ -UR Urinal Carrier -60 Valve Plate for Attaching
to Upright
▼ -WC Water Cooler Carrier
▼ -WCBL Water Cooler Bi-Level Carrier
SPECIFICATION
JOSAM 17550-BB Series floor-mounted, back-to-back Lavatory Carrier with hanger
plates, adjustable supporting rods, structural uprights and welded feet.
OPTIONS N/A:
-CL, -UR, -WC, -WCBL
OPTION N/A
-60
FIXTURE CARRIERS
17550-WC SERIES FLOOR-MOUNT, -WC Water Cooler Carrier
APPLICATION REUSABLE ALIGNMENT TOOL
AVAILABLE. SEE PAGE 45.
For use with water coolers furnished with hangers that require a carrier for support
and where thin wall construction demands uprights that support the fixture com-
pletely independent of the wall.
SPECIFICATION
CARRIERS
JOSAM 17550-WC Series floor-mounted single Water Cooler Carrier with hanger
plate, adjustable supporting rods, structural uprights and welded feet.
OPTION N/A
-60
SPECIFICATION
JOSAM 17550-WCBL Series floor-mounted bi-level Water Cooler Carrier with hanger
plates and adjustable supporting rods, structural uprights and welded feet.
OPTION N/A
-60
53
Fixture Carriers 08.qxd 4/22/08 6:49 PM Page 54
FIXTURE CARRIERS
17560 SERIES FLOOR-MOUNT, Bearing Plate Type
APPLICATION REUSABLE ALIGNMENT TOOL
AVAILABLE. SEE PAGE 45.
For use with lavatories furnished with hangers that require a carrier for support with
bearing plate and where thin wall construction demands uprights that support the
fixture completely independent of the wall.
SPECIFICATION
CARRIERS
JOSAM 17560 Series floor-mounted, single Lavatory Carrier with hanger and
bearing plate, adjustable supporting rods, structural uprights, welded feet and
chrome-plated trim.
Available Options
▼ -BB Back-to-Back Carrier -10 Hardware for Walls over 4”,
▼ -UR Urinal Carrier Specify Wall Thickness
▼ -WC Water Cooler Carrier -60 Valve Plate for Attaching
to Upright
▼ -WCBL Water Cooler Bi-Level Carrier
SPECIFICATION
JOSAM 17560-BB Series floor-mounted back-to-back Lavatory Carrier with hanger
plates, bearing plates, adjustable supporting rods, structural uprights, welded feet and
chrome-plated trim.
OPTIONS N/A:
-UR, -WC, -WCBL
FIXTURE CARRIERS
17560-UR SERIES FLOOR-MOUNT, -UR Urinal Carrier
APPLICATION REUSABLE ALIGNMENT TOOL
AVAILABLE. SEE PAGE 45.
For use with urinals furnished with hangers that require a carrier for support with
bearing plate and where thin wall construction demands uprights that support the
fixture completely independent of the wall.
SPECIFICATION
CARRIERS
JOSAM 17560-UR Series floor-mounted single Urinal Carrier with hanger plate,
bearing plate, adjustable supporting rods, structural uprights, welded feet and
chrome-plated trim.
OPTION N/A
-60
SPECIFICATION
JOSAM 17560-WC Series floor-mounted, single Water Cooler Carrier with hanger
plate, bearing plate, adjustable supporting rods, structural uprights, welded feet and
chrome-plated trim.
OPTION N/A
-60
OPTION N/A
-60
55
Fixture Carriers 08.qxd 4/29/08 10:42 AM Page 56
FIXTURE CARRIERS
17590 SERIES WALL-MOUNT, Hanger Plate Type
APPLICATION
For use with lavatories furnished with hangers that require a carrier for support
where wall construction will support the fixture and carrier assembly.
SPECIFICATION
CARRIERS
JOSAM 17590 Series wall-mounted, single Lavatory Carrier with hanger plate and
adjustable supporting rods.
Available Options
▼ -DP Double Plate Carrier
▼ -UR Urinal Carrier
-10 Hardware for Walls over 7”, Specify Wall Thickness
Hardware for Walls over 4" on 17590-DP and 17590-UR-DP,
Specify Wall Thickness
SPECIFICATION
JOSAM 17590-DP Series wall-mounted single Lavatory Carrier with hanger plates and
adjustable supporting rods.
FIXTURE CARRIERS
17590-UR SERIES WALL-MOUNT, -UR Urinal Carrier
APPLICATION
Multipurpose carrier for use with urinals furnished with hangers that require a carrier
for support where wall construction will support the fixture and carrier assembly.
SPECIFICATION
CARRIERS
JOSAM 17590-UR Series wall-mounted single Urinal Carrier with hanger plate and
adjustable supporting rods.
17590-UR-DP SERIES WALL-MOUNT, -UR Urinal Carrier with -DP Double Plates
APPLICATION
For use with urinals furnished with hangers that require a carrier for support where
wall construction will support the fixture and carrier assembly.
SPECIFICATION
JOSAM 17590-UR-DP Series wall-mounted single Urinal Carrier with hanger plates
and adjustable supporting rods.
57
Fixture Carriers 08.qxd 4/29/08 10:42 AM Page 58
FIXTURE CARRIERS
17720 SERIES FLOOR-MOUNT, Heavy-Duty Type
APPLICATION
For use with service sinks designed for heavy-duty exposed arms and hanger plate
where thin wall construction demands uprights that support the fixture completely
independent of the wall.
SPECIFICATION
CARRIERS
JOSAM 17720 Series floor-mounted, single, heavy-duty Sink Carrier with hanger plate,
adjustable supporting rods, acid-resisting white coated arms, leveling and securing
screws, structural uprights, welded feet and chrome-plated trim.
Available Options
-VP Vandal-Proof Trim
-10 Hardware for Walls over 4”, Specify Wall Thickness
▼ -66 Split Header for Stainless Steel Arms
17720-66 SERIES FLOOR-MOUNT, with -66 Split Header for Stainless Steel Arms
APPLICATION
For use with wash-up sinks designed for heavy-duty exposed arms and hanger plate
where thin wall construction demands uprights that support the fixture completely
independent of the wall.
SPECIFICATION
JOSAM 17720-66 Series floor-mounted, single, heavy-duty Sink Carrier with hanger
plate, adjustable supporting rods and bearing studs, structural uprights, welded feet
and chrome-plated trim.
OPTION N/A:
-VP
FIXTURE CARRIERS
17730 SERIES FLOOR-MOUNT with Adjustable Coupling
APPLICATION
For use with 4" back-outlet flushing rim service sinks designed for hanging on heavy-
duty studs with support plates and 4" piping connection where thin wall construction
demands uprights that support the fixture completely independent of the wall.
SPECIFICATION
CARRIERS
JOSAM 17730 Series floor-mounted single heavy-duty Sink Carrier with support
plates, adjustable coupling with 4" piping connection, mounting studs, structural
uprights, welded feet and chrome-plated trim.
Available Options
-VP Vandal-Proof Trim
-11 Cast Iron Adjustable Extension through 12” Length,
Specify 6”, 9”, 12” on Order
-60 Valve Plate for Attaching to Upright
SPECIFICATION
JOSAM 17735 Series floor-mounted single heavy-duty Sink Carrier with support
plates, adjustable coupling with 4" x 2" waste fitting, mounting studs, structural
uprights, welded feet and chrome-plated trim.
Available Options
-VP Vandal-Proof Trim
-10 Hardware for Walls Over 5-3/8", Specify Wall Thickness
-45 Threaded High Left-Hand Auxiliary Vent
-46 Threaded High Right-Hand Auxiliary Vent
59
Fixture Carriers 08.qxd 3/27/08 11:46 AM Page 60
JIFFEE-JOINT GASKETS
Features
JIFFEE-JOINT GASKETS
JIFFEE-JOINT Gaskets provide a fast, positive method of installing JOSAM drains, cleanouts and other products having inside caulk outlets (-X).
These patented gaskets are the result of years of development and proven field use. They save the installer valuable time and assure him of a
leakproof joint to virtually any type of pipe, even in inclement weather. As pointed out below, the features offered by this gasket to the specifier,
contractor and installer, make good sense – another good reason to specify and install JOSAM plumbing drainage products.
JOSAM JIFFEE-JOINTS will join and seal JOSAM inside caulk outlet (-X) drainage products to various types of pipes.
APPLICATION CHART PIPE DIAMETER GASKET-PIPE TABLE
TOLERANCE RANGE CAST IRON PVC
TYPE NO. DESIGNATION Inches Millimeters SOIL PIPE NO- PLASTIC THIN COPPER
From Min. To Max. From Min. To Max XH SW HUB ABS PVC WALL STEEL DWV GLASS
19802 2" SW 2.125 2.390 54.0 60.7 • • • •
19803 3" SW 3.125 3.390 79.4 86.1 • • • •
19804 4" SW 4.125 4.390 104.8 111.5 • • • •
19805 5" SW 5.210 5.390 132.3 136.9 • •
19806 6" SW 6.210 6.390 157.7 162.3 • •
19812 2" XH 2.290 2.470 58.2 62.7 • • • • • •
19813 3" XH 3.410 3.590 86.6 91.2 • • • • •
19814 4" XH 4.410 4.590 112.0 116.6 • • • • •
19815 5" XH 5.410 5.590 137.4 142.0 •
19816 6" XH 6.410 6.590 162.8 167.4 •
19825 5" SP 5.550 5.70 141.0 144.8 • • •
19826 6" SP 6.550 6.70 166.4 170.2 • • • •
SW – Service WeightXH – Extra Heavy SP – Steel Pipe These recommendations apply to pipe that conforms to ANSI, ASTM and other applicable standards.
JIFFEE-JOINT Gaskets are designed for use only with JOSAM caulk outlet (-X) products.
60
Roof Drains_08.qxd 3/28/08 12:14 PM Page 61
ROOF DRAINS
LEVELEZE® Features
LEVELEZE® Roof Drains are just what the name implies – easy to level to the proper elevation. The adjustable integral top is mated to the
body and support ring with a heavy machined thread which permits virtually unlimited top level adjustment to accommodate various
insulation thicknesses. The line contact between the threads provides positive circumferential support of the top at any adjusted elevation.
This versatile drain readily adapts to changes in finished roof elevation. With LEVELEZE® on the job, installation delays normally
encountered, where fixed height extensions are specified, will not be experienced.
ROOF DRAINS
stop prevents roof surface aggregates irregular and off-center deck openings.
from being washed into drain while
permitting total drainage through
"V" notch weirs.
BODY
SUPPORT RING & GASKET Heavy-duty coated cast iron body with
Cast iron support ring mates with wide support flange, large smooth sump
LEVELEZE® adjustable collar permitting and connection to suit leader piping.
smooth uninterrupted adjustment to Without adjustable collar, the body can
21500-AE Series LEVELEZE® be installed in the deck and connected
accommodate various insulation Large Dome Roof Drain
thicknesses. Gasket prevents leakage to the leader to receive drainage during
JIFFEE-SET construction. When roof is ready for
between drain body and support ring. JOSAM Roof Drains feature JIFFEE-SET connections with MULTI- insulation and topping, the collar can be
TITE® service weight (SV) soil pipe gaskets, conforming to ASTM installed and set to required elevation
Standard C564 in 2, 3 and 4 inch sizes for labor-saving assembly for completion of the installation.
to service weight pipe in cast iron, no-hub cast iron, PVC and ABS.
Merely lubricate gasket and pipe, push (or insert) until it contacts
built-in stop and the joint is complete.
Conventional Features
WEJLOC® CLAMP RING – DOME DRAIN RECEIVER
GRAVEL STOP Precision molded polypropylene plastic, low-silhouette dome with Coated formed steel drain receiver
Embodies the exclusive compression 124 sq. in. free open drainage flow area, narrow vertical slotted incorporates recessed flange to support
wedge lock principle to secure flashing openings to prevent entrance of debris, and positive locking device. drain body and wide peripheral flange to
with a positive non-puncturing bond to distribute drain load over a broad area
mating flange of body. The gravel stop of the deck, also compensating for
prevents roof surface aggregates from irregular and off-center deck openings.
being washed into the drain while
permitting total drainage through "V"
notch weirs.
FIXED EXTENSION DECK CLAMP
On deck where applied insulation is Heavy-duty deck clamp secures drain
involved, the extension, available in body to roof deck with the compression
various heights, is used to bring drain clamp principle forming a permanent
top to roof surface elevation. The bond between drain and roof preventing
flange is equivalent in diameter to any movement of drain and possible
that on the drain body. rupture of roofing materials.
GASKET BODY
Resilient Neoprene ring-type gasket Heavy-duty coated cast iron body with
provides a watertight joint between 21500 Series Large wide support flange, large smooth sump
extension skirt and body flange. Dome Roof Drain and connection to suit leader piping.
61
Roof Drains_08.qxd 3/28/08 12:14 PM Page 62
Page 92
25520 - Medium Sump
Water Dam
Page 93
25540 - Small Sump
Water Dam
62
Roof Drains_08.qxd 3/28/08 12:14 PM Page 63
Page 79
22500 - Large Sump
ROOF DRAINS
22080 PROMENADE 24500 24500-45 24500-90
Mid-Size Roof Drain Secured Dome Secured Dome, Secured Dome,
23730 23740 45° Outlet 90° Outlet
Round Grate, Heavy-Duty Grate
Square Frame
PARAPET
24700 24700-45 24720 24720-45 24900 25000
Shallow Sump Shallow Sump, Shallow Sump Shallow Sump, Extra Large Angle Grate Parapet Scupper Sleeve,
45° Outlet 45° Outlet Adjustable Wall Collar
MISCELLANEOUS PRODUCTS
25010 26200 26440 26450 26700 29000
Downspout Nozzle Expansion Joint Stack Fitting Flashing Sleeve, Vandal-Proof Vent Cap, Isolation Deck Drain,
Counterflashing & Frost-Proof Openings Large Sump
Caulk Recesses
63
Roof Drains_08.qxd 3/28/08 12:14 PM Page 64
ROOF DRAINS
How To Order Roof Drains
Unless optional materials are specified, standard material shown in Specification will be provided. Last digit indicates outlet size.
Drain Receivers
TABLE OF DIMENSIONS
SERIES NO. A B C D
21500 24 15-1/2 14-9/16 21/64
22010 20 12-1/4 11-1/2 21/64
22080 16 9-1/2 7-1/2 47/64
64
Roof Drains_08.qxd 3/28/08 12:14 PM Page 65
ROOF DRAINS
Options
The variations shown below illustrate and explain various roof drain components. These variations must be specified
and installed when the type of roof construction dictates their use. See specific series for available options.
ROOF DRAINS
(-1) OPTION, DECK CLAMP (-2) OPTION, DRAIN RECEIVER
The deck clamp is the most dependable means by which the roof drain can be The drain receiver is recommended for use in all roof drain installations regard-
secured to the roof deck to insure a permanent bond that will prevent damage of less of deck construction and is of particular importance when used in conjunc-
flashing and membrane materials caused by movement and vibration. It is secured to tion with drains installed in decks where support is on insulation. The drain
the underside of the drain body with heavy-duty threaded rods, which provide adjust- receiver is produced in heavy gauge steel, coated for protection, and embodies
ment to accommodate various slab or deck thicknesses, and is drawn tightly in place a recessed flange to carry the drain, and a wide flange to support the assembly
against the underside of the deck to form a positive union. on the roof. The drain receiver distributes the weight of the roof drain evenly
over the deck and compensates for irregular and misaligned deck openings.
(-10) OPTION, FIXED EXTENSION COLLAR USED WITH LEVELEZE® DRAINS (-VP) OPTION, VANDAL-PROOF SECURED DOME
For roof or deck construction where base slab to surface height is greater than can Where vandalism or mischievous activity is anticipated, it is advisable to specify
be accommodated with the standard LEVELEZE® collar, the (-10) Fixed Extension vandal-proof domes on roof drains. All JOSAM precision-molded plastic large
Collar “A” is used along with the LEVELEZE® assembly. These collars can be used domes incorporate bayonet locking devices as standard equipment; however, when
in multiples where extension requirements dictate. The Fixed Extension Collar can specified vandal-proof, they are further secured with screws to insure permanence
be cast in increments of 1, 2, 3 and 4 inches. Shorter or longer dimensions are of assembly. Other types of domes can also be vandal-proofed when specified.
available by cutting or stacking extensions
65
Roof Drains_08.qxd 3/28/08 12:14 PM Page 66
ROOF DRAINS
Conventional Roof Drainage Systems
SIZING WORKSHEET
The number of roof drains for a given project can be determined by
the ratio method which indicates that roof drains be installed at the
minimum of one roof drain for each 10,000 sq. ft. of roof area. The
rainfall for a given locality is found in Figure 4, or in Figure 5 if the
locality is not listed. Figure 7 converts the rainfall to G.P.M., and
Figure 8 provides the system sizing data. The sizing worksheet shown
in Figure 1 offers a quick sizing procedure to be followed by the
engineer, and it also serves as a file record on the project. The
conventional roof drainage requirements for a project have been
determined on the example worksheet (Figure 1).
Note: A supply of worksheets can be obtained from your local JOSAM
Representative.
ROOF DRAINS
66
Roof Drains_08.qxd 3/28/08 12:14 PM Page 67
ROOF DRAINS
Conventional Roof Drainage Systems
PURPOSE
The roof drainage system is designed to receive rainwater as it falls on the roof and convey it to the street, sewer facilities or other means available for its
disposal. This system should be sized to handle the maximum rainfall used as design criteria for a project. The following information covers the basic
requirements for the sizing of conventional roof drainage systems and the placement of their components.
QUANTITY
To minimize water ponding and insure complete drainage, two roof drains should be installed for total roof areas of 10,000 sq. ft. or less. For larger roof
areas, roof drains should be installed at the minimum of one drain for each 10,000 sq. ft. of roof area.
Roofs are of various shapes and dimensions, with sections which may be more or less than the 10,000 sq. ft. recommendation for each drain. Therefore,
sometimes it will be necessary to depart from this recommendation as required for proper placement and uniform distribution of roof drains.
PLACEMENT
The placement of roof drains is influenced by roof structure support columns, expansion joints, dividers and other projections. Careful consideration of these
ROOF DRAINS
elements during the placement-planning phase is essential to provide adequate drainage for each area. Figure 2 shows how the roof drains can be placed
on a dimensional basis with a maximum limit from the edge of the roof and between drains.
OVERFLOW RELIEF
The perimeter edge of a roof structure is generally elevated by parapets, cants or other means. A blockage in the drainage piping could cause a water
buildup which could overload the roof structure. To prevent this occurrence, it is recommended that overflow relief measures such as scupper or parapet
drains be specified at the ratio of at least one for each 20,000 sq. ft. of roof area. The invert elevation of the scupper should not be more than a safe water
depth as determined in conjunction with the architect and structural engineer, not more than 5 inches above roof level on flat roofs and 6 inches above low
point on sloped roofs.
RAINFALL DATA
The rainfall that can be expected in a given locality can be obtained from the local code authorities or the nearest rainfall recording station. A study of the
maximum rate of rainfall in inches per hour that has been recorded or estimated in U.S. Weather Bureau technical papers No. 2, No. 25, and No. 40 has
enabled us to develop a composite average of maximum rainfall data for design purposes in various localities as shown in Figure 4. For localities that have
not been listed, the approximate maximum rainfall data can be determined from the map shown in Figure 5. It is recommended that the local code
authorities be consulted regarding the specific rainfall amount that they may anticipate for design purposes.
State Rainfall State Rainfall State Rainfall State Rainfall State Rainfall State Rainfall State Rainfall
& in inches & in inches & in inches & in inches & in inches & in inches & in inches
City per hour City per hour City per hour City per hour City per hour City per hour City per hour
ALABAMA DISTRICT OF COLUMBIA IOWA MINNESOTA NEW YORK Pittsburgh 2.7 UTAH
Anniston 3.6 Washington 3.4 Burlington 3.3 Duluth 2.6 Albany 2.5 Reading 3.0 Salt Lake City 1.3
Birmingham 3.6 FLORIDA Davenport 3.2 Minneapolis 3.0 Binghamton 2.5 Scranton 2.6 VERMONT
Mobile 4.2 Apalachicola 4.3 Des Moines 3.3 St. Paul 3.0 Buffalo 2.4 PUERTO RICO Burlington 2.0
Montgomery 3.8 Fort Meyers 4.3 Dubuque 3.1 MISSISSIPPI New York 3.2 San Juan 4.0 VIRGINIA
ALASKA Jacksonville 4.0 Sioux City 3.3 Jackson 3.8 Rochester 2.4 RHODE ISLAND Lynchburg 3.4
Anchorage 1.0 Key West 4.5 KANSAS Meridan 3.8 Syracuse 2.3 Block Island 3.0 Norfolk 3.8
Fairbanks 1.2 Miami 4.6 Concordia 3.7 Vicksburg 3.7 NORTH CAROLINA Providence 3.0 Richmond 3.6
Juneau 1.0 Pensacola 4.3 Dodge City 3.6 MISSOURI Asheville 3.2 SOUTH CAROLINA Roanoke 3.3
ARIZONA Tampa 4.2 Topeka 3.7 Columbia 3.6 Charlotte 3.4 Charleston 4.1 WASHINGTON
Phoenix 2.5 GEORGIA Wichita 3.7 Hannibal 3.4 Greensboro 3.4 Columbia 3.6 Port Angeles 1.0
Tucson 3.0 Atlanta 3.5 KENTUCKY Kansas City 3.7 Raleigh 3.7 Greenville 3.4 Seattle 1.0
ARKANSAS Augusta 3.6 Lexington 2.8 St. Joseph 3.6 Wilmington 4.0 SOUTH DAKOTA Spokane 1.0
Bentonville 3.8 Columbus 3.7 Louisville 2.9 St. Louis 3.4 NORTH DAKOTA Pierre 2.9 Tacoma 1.1
Fort Smith 3.9 Macon 3.7 LOUISIANA Springfield 3.7 Bismark 2.8 Rapid City 2.7 Walla Walla 1.0
Little Rock 3.7 Savannah 4.0 Lake Charles 4.4 MONTANA Fargo 2.8 Sioux Falls 3.3 Yakima 1.0
CALIFORNIA Thomasville 4.0 New Orleans 4.5 Billings 2.0 OHIO TENNESSEE WEST VIRGINIA
Bakersfield 1.5 HAWAII Shreveport 4.0 Havre 1.8 Cincinnati 2.7 Chattanooga 3.3 Charleston 2.8
Eureka 1.6 Hilo 3.0 MAINE Helena 1.5 Cleveland 3.0 Knoxville 3.2 Huntington 2.8
Fresno 1.5 Honolulu 3.2 Portland 2.3 Missoula 1.3 Columbus 2.7 Memphis 3.6 Parkersburg 2.6
Los Angeles 2.0 IDAHO MARYLAND NEBRASKA Dayton 2.6 Nashville 3.1 WISCONSIN
Sacramento 1.4 Boise 1.1 Baltimore 3.4 Lincoln 3.6 Sandusky 3.0 TEXAS Green Bay 2.6
San Diego 1.5 Lewiston 1.1 MASSACHUSETTS North Platte 3.3 Toledo 3.0 Abilene 3.5 La Crosse 2.9
San Francisco 1.6 Pocatello 1.3 Boston 2.6 Omaha 3.5 Youngstown 2.6 Amarillo 3.4 Madison 3.0
San Jose 1.6 ILLINOIS Nantucket 3.0 NEVADA OKLAHOMA Austin 4.0 Milwaukee 2.7
COLORADO Cairo 3.4 MICHIGAN Reno 1.2 Oklahoma City 3.9 Brownsville 4.5 WYOMING
Denver 2.5 Chicago 3.0 Alpena 2.2 NEW HAMPSHIRE Tulsa 3.9 Corpus Christi 4.5 Casper 2.1
Durango 1.7 Peoria 3.1 Detroit 3.0 Concord 2.4 OREGON Dallas 4.0 Cheyenne 2.5
Grand Junction 1.6 Springfield 3.3 Escanaba 2.3 NEW JERSEY Medford 1.4 Del Rio 4.5 Sheridan 2.1
Pueblo 2.6 INDIANA Grand Rapids 2.6 Atlantic City 3.5 Pendleton 1.0 El Paso 2.4 Yellowstone Park 1.5
CONNECTICUT Evansville 3.0 Marquette 2.2 Newark 3.0 Portland 1.4 Fort Worth 4.0
Hartford 3.0 Fort Wayne 2.6 Port Huron 2.4 Trenton 3.2 PENNSYLVANIA Galveston 4.6
New Haven 3.0 Indianapolis 2.8 Saginaw 2.4 NEW MEXICO Allentown 3.0 Houston 4.5
DELAWARE South Bend 2.8 Sault St. Marie 2.0 Albuquerque 2.1 Erie 3.0 Port Arthur 4.5
Wilmington 3.5 Terre Haute 2.9 Roswell 2.6 Harrisburg 2.9 San Antonio 4.0
Santa Fe 2.2 Philadelphia 3.3 Wichita Falls 3.8
FIGURE 4
67
Roof Drains_08.qxd 3/28/08 12:14 PM Page 68
ROOF DRAINS
Conventional Roof Drainage Systems
ROOF DRAINS
FIGURE 5
RAINFALL MAP
The maximum rate of rainfall for a number of localities is shown in Figure 4. For localities that are not listed, see the rainfall map (Figure 5).
The maximum rainfall curves shown on this map have been compiled on the basis of a composite average of recorded rainfall data. The
rainfall curves in Figure 5 represent maximum rainfall. These can be expressed as 100-year storm curves. To arrive at the rainfall for 50-, 25-
and 10-year return period storms, a constant .3 inch reduction factor for each storm period is employed for each curve. (Use Figure 6)
If the location desired falls between two curves, an estimate should be made as to how far away the location is and then adjust the rainfall
accordingly. EXAMPLE: Salt Lake City is approximately 1/2 of the way between the curves of 1.0 and 1.5, therefore, the estimate of 1.3
would be used.
FIGURE 6
68
Roof Drains_08.qxd 3/28/08 12:14 PM Page 69
ROOF DRAINS
Conventional Roof Drainage Systems
RAINFALL CONVERSION DATA
Rainfall is expressed in inches of water per hour. For sizing purposes, it is necessary to convert "inches per hour" to "gallons per minute." The
data in Figure 7 represents the conversion of rainfall in "inches per hour" to "gallons per hour per sq. ft." and "gallons per minute per sq. ft."
For example, a 3 inch per hour rainfall will build up to a 3 inch depth on a flat roof in one hour, at the rate of 1.87 gallons per hour/sq. ft. or .0312
gallons per minute/sq. ft. (See Figure 7). Using a 10,000 sq. ft. roof area, the 3 inch rainfall will produce 18,700 gallons in one hour at the rate
of 312 gallons per minute. See the following.
ROOF DRAINS
In G.P.H. G.P.M. In G.P.H. G.P.M. In G.P.H. G.P.M.
Inches Per 1 Per 1 Inches Per 1 Per 1 Inches Per 1 Per 1
Per Hr. Sq. Ft. Sq. Ft. Per Hr. Sq. Ft. Sq. Ft. Per Hr. Sq. Ft. Sq. Ft.
SYSTEM SIZING DATA FLOW CAPACITY FOR STORM DRAINAGE SYSTEMS IN GALLONS PER MINUTE
Rainfall, when expressed in G.P.M. can be applied Roof Drain Horiz. Storm Drainage Piping G.P.M.
to the table in Figure 8 to determine the sizes of Pipe and Vertical
the various components of the conventional roof Diameter Leaders Slope – Inches Per Ft.
drainage system, including roof drains, vertical (Inches) (G.P.M.) 1/8 1/4 1/2
leaders and horizontal drainage piping. Using 2 30 - - -
Figure 8, the 312 G.P.M. rate of rainfall would 2-1/2 54 - - -
require a 5 inch roof drain and leader as well as 3 92 34 48 69
a 6 inch horizontal drainage line if a slope of 1/4 4 192 78 110 157
inch per foot were selected. 5 360 139 197 278
6 563 223 315 446
8 1208 479 679 958
10 - 863 1217 1725
12 - 1388 1958 2775
15 - 2479 3500 4958
FIGURE 8
69
Roof Drains_08.qxd 3/28/08 12:14 PM Page 70
ROOF DRAINS
FLO-SET® Control Flow Features
The JOSAM FLO-SET® Roof Drain has four straight weirs incorporated in the vane collar assembly. The vane collar is 6” high to satisfy water storage up
to a 6” maximum on a sloped roof. The weirs in the vane collar assembly are adjustable to permit a minimum peak flow of 15 G.P.M. to a maximum
peak flow of 420 G.P.M. at the 6” elevation.
The correct weir opening to fill any requirement is accomplished by means of a calibrated setting. From information received concerning the location of
the project, the size and quantity of drains, maximum storage depth and peak flow rate, the proper adjustment is pre-set by JOSAM before shipping.
STATIONARY VANES AND ADJUSTABLE COLLAR ADJUSTABLE VANE COLLAR TOP VIEW OF COMPLETE ASSEMBLY
This combined weir arrangement permits water The adjustable vane collar is marked with 18 different with Vandal-Proofed weirs and secured cast iron
storage up to 6” maximum. The straight weir is the weir openings thereby permitting controlled discharge dome.
only weir able to produce the same basic type of flow flow rates to a maximum of 420 G.P.M. The correct
pattern. It is the only type of weir, therefore, that is weir opening can be provided to fulfill the exact needs
ideal or practical for adjustable purposes. of any given controlled flow application involving flat
or sloped roofs.
70
Roof Drains_08.qxd 4/22/08 6:24 PM Page 71
ROOF DRAINS
Replacement Parts
Josam introduced the first non-puncturing clamping device for roof drains in the 1920’s. By casting lugs into the body and flat tabs onto the clamp
ring, the membrane could be clamped between the drain body and clamp ring using the 410 Clamp Posts. The original design can be identified in
the field by the use of these clamp posts to secure the body to the clamp ring. The 410 and 4110 Series replacement parts below are for use with
these original drains. Please use these drawings to check dimensions carefully as replacement parts are not returnable.
410 CLAMP POST PACK 4110 C.I. DOME Use with 410 Clamp Ring
ROOF DRAINS
Type Part No. A B
4114 O.S. 029240 12-1/4 5-3/8
Part No. Description 4116 029350 14-1/6 5-3/8
010245 Clamp Post Pack (Four to a Pack) 4118 029420T 16-3/8 6-13/32
410 C.I. DOME Use with 410 Clamp Ring 21500 DOME
71
Roof Drains_08.qxd 3/28/08 12:14 PM Page 72
ROOF DRAINS
Typical Installations
GYPSUM ROOF DECK SYSTEM TYPICAL ROOF CONSTRUCTION
ROOF DRAINS
TYPICAL INSULATED ROOF MEMBRANE SYSTEM PRECAST CONCRETE DECK STEEL ROOF DECK
WOOD JOIST STRUCTURAL STEEL PRECAST SOLID CONCRETE PRECAST HOLLOW CELL
ROOF SYSTEM JOIST ROOF SYSTEM ROOF DECK SYSTEM ROOF DECK SYSTEM
72
Roof Drains_08.qxd 3/28/08 12:14 PM Page 73
ROOF DRAINS
Typical Installations
STEEL-SUPPORTED BUILT-UP ROOF DECK SYSTEM TYPICAL INSULATED ROOF MEMBRANE SYSTEM
ROOF DRAINS
23500-AE Series Promenade Roof Drain 23500-IRMA Series
CONCRETE DECK WITH ASPHALT PARKING SURFACE PRECAST HOLLOW CELL ROOF DECK
23510 Series Promenade Roof Drain 23730 Series Promenade Roof Drain
24020 Series SUPER-FLO® Composition Deck Drain 24200 Series ALL-LEVEL Drain
73
Roof Drains_08.qxd 4/30/08 10:53 AM Page 74
ROOF DRAINS
21500 SERIES LARGE SUMP
APPLICATION
Used on roofs of any size, for any type of construction. Large slotted dome provides
maximum free area for quick drainage of rainwater and protects the drain sump and
connected piping from debris. WEJLOC® compression flashing clamp holds the mem-
brane or flashing securely to the drain body.
SPECIFICATION
JOSAM 21500 Series coated cast iron Roof Drain, large polypropylene locking dome,
WEJLOC® non-puncturing clamp ring with integral gravel stop, large sump with wide
roof flange and bottom outlet.
Available Options
▼ -AE LEVELEZE® Adjustable Ext. ▼ -16 * Internal Waterguard
▼ -AER Adjustable Extension Using 2"- 6" Outlets Only
Threaded Rods -17 * 2" High Solid
▼ -IRMA Perforated Stainless Clamping Collar
Steel Extension ▼ -19 Clamp Collar w/Perforated
-CR Clamping Drain Receiver SS Gravel Guard
ROOF DRAINS
21500-6 SERIES LARGE SUMP with -6 Extra Wide Flange Drain Body
APPLICATION
Used on roofs of any size, typically concrete decking, large slotted dome ensures
maximum free area for quick drainage of rainwater and protects the drain sump
and connected piping from debris. WEJLOC® compression-flashing clamp holds the
membrane or flashing securely to the drain body. Extra wide flange provides posi-
tive support and large bonding surface for liquid applied membranes.
SPECIFICATION
JOSAM 21500-6 Series coated cast iron Roof Drain, large polypropylene locking
dome. WEJLOC® non-puncturing clamp ring with integral gravel stop, large sump
with extra-wide roof flange and bottom outlet inside caulk connection.
OPTIONS N/A:
-AER, -CR, -1C, -2, -3, -3C, -4
ROOF DRAINS
21500-AE SERIES LARGE SUMP with -AE Threaded Adjustable Extension
APPLICATION
Used on roofs of any size, for any type of construction. Large slotted dome provides
maximum free area for quick drainage of rainwater and protects the drain sump and
connected piping from debris. WEJLOC® compression flashing clamp holds the mem-
brane or flashing securely to the drain body. LEVELEZE® adjustable extension
accommodates insulation of variable thickness.
SPECIFICATION
JOSAM 21500-AE Series coated cast iron LEVELEZE® Roof Drain, large polypropylene
locking dome, WEJLOC® non-puncturing clamp ring with integral gravel stop, bolted
support ring, adjustable top with wide roof flange, large sump with anchor flange
and bottom outlet.
ROOF DRAINS
▲ WITH CLAMP RING 2-1/4" MIN. 4-1/4" MAX.
CONFORMS WITH ASTM-C564.
• THIS DIM. IS 5-3/4" FOR 21508-AE-T.
21500-AER SERIES LARGE SUMP with -AER Adjustable Ext. Using Threaded Rods
APPLICATION
Used on roofs of any size, for any type of construction. Large slotted dome provides
maximum free area for quick drainage of rainwater and protects the drain sump and
connected piping from debris. WEJLOC® compression flashing clamp holds the mem-
brane or flashing securely to the drain body. Threaded rods attached to drain body
and receiver permit the raising and lowering of roof drain body to meet the insula-
tion thickness at the required elevation.
SPECIFICATION
JOSAM 21500-AER Series coated cast iron roof drain, large polypropylene locking
dome, WEJLOC® non-puncturing clamp ring, large sump with adjustable extension
rods, drain receiver and bottom outlet.
OPTIONS N/A:
-AE, -1, -1C, -2, -3, -3C, -4, -10, -10-20
75
Roof Drains_08.qxd 3/28/08 12:14 PM Page 76
ROOF DRAINS
21500-16 SERIES LARGE SUMP with -16 Internal Waterguard
APPLICATION
Used on roofs of any size, for any type of construction where constant flooding is
required at a predetermined water depth. It may also be used on conventional roofs
as a safety overflow, which receives water only when the build-up is greater than the
height of the standpipe. Large slotted dome provides maximum free area for quick
drainage of rainwater and protects the drain sump and connected piping from debris.
WEJLOC® compression-flashing clamp holds the membrane or flashing securely to the
drain body.
SPECIFICATION
JOSAM 21500-16 Series coated cast iron Roof Drain, internal waterguard type, and
large polypropylene locking dome. WEJLOC® non-puncturing clamp ring with integral
gravel stop, secured plastic internal waterguard for 3" water depth and large sump
with wide roof flange and bottom outlet.
OPTIONS N/A:
-4, -17
ROOF DRAINS
21500-19 SERIES LARGE SUMP with -19 Perforated Stainless Steel Gravelguard
APPLICATION
Used on flat roofs where gravel ballast is employed to anchor the membrane. Large
slotted dome provides maximum free area for quick drainage of rainwater and pro-
tects the drain sump and connected piping from debris. WEJLOC® compression flash-
ing clamp holds the membrane or flashing securely to the drain body. Perforated
stainless steel gravel guard and restrains gravel ballast from dome and drain sump.
SPECIFICATION
JOSAM 21500-19 Series coated cast iron Roof Drain, large polypropylene locking
dome, WEJLOC® non-puncturing clamp ring with integral gravel stop and stainless
perforated gravel guard and large sump with wide roof flange and bottom outlet.
OPTION N/A:
-4
76
Roof Drains_08.qxd 4/22/08 6:26 PM Page 77
ROOF DRAINS
21500-IRMA SERIES LARGE SUMP with Perforated Stainless Steel Extension
APPLICATION
Used on roof systems where the “Insulated Membrane Assembly,” also known as,
“Inverted Membrane Assembly” is specified. Insulation is installed on top of the
waterproof membrane and gravel ballast is applied over the insulation. Drain is fur-
nished with a perforated stainless steel extension, made to the specified height of
the insulation combined with the depth of the ballast. Large slotted dome provides
maximum free area for quick drainage of rainwater and protects the drain sump and
connected piping from debris. WEJLOC® compression flashing clamp holds the mem-
brane or flashing securely to the drain body.
SPECIFICATION
JOSAM 21500-IRMA Series coated cast iron Roof Drain, large polypropylene locking
dome, dome support ring, perforated stainless steel extension filter, WEJLOC® non-
puncturing clamp ring and large sump with wide roof flange and bottom outlet.
OPTION N/A:
-4
ROOF DRAINS
CONFORMS WITH ASTM-C564.
▲ "A" DIM. SPECIFY ON ORDER.
● THIS DIM. IS 5-3/4" FOR 21508-IRMA-T.
21500-IRMA-6 SERIES LARGE SUMP with -6 Wide Flange & Perforated SS Extension
APPLICATION
Used on roof systems where the “Insulated Membrane Assembly,” also known as,
“Inverted Membrane Assembly” is specified. Insulation is installed on top of the
waterproof membrane and gravel ballast is applied over the insulation. Drain is fur-
nished with a perforated stainless steel extension, made to the specified height of
the insulation combined with the depth of the ballast. Large slotted dome provides
maximum free area for quick drainage of rainwater and protects the drain sump and
connected piping from debris. WEJLOC® compression flashing clamp holds the mem-
brane or flashing securely to the drain body. With extra wide deck flange for positive
support and large bonding surface for liquid applied membranes.
SPECIFICATION
JOSAM 21500-IRMA-6 Series coated cast iron Roof Drain, large polypropylene locking
dome, dome support ring, perforated stainless steel extension filter, WEJLOC® non-
puncturing clamp ring and large sump with extra wide roof flange and bottom outlet
inside caulk connection.
OPTION N/A:
-4
77
Roof Drains_08.qxd 3/28/08 12:14 PM Page 78
ROOF DRAINS
22010 SERIES MEDIUM SUMP, Beehive Dome
APPLICATION
Used on mid-sized roofs of any construction where a medium-sized drain is required.
Flashing clamp holds the membrane or flashing securely to the drain body. Medium-
sized beehive dome provides ample drainage for smaller roof decks and intercepts
debris.
SPECIFICATION
JOSAM 22010 Series coated cast iron Roof Drain, medium beehive dome, non-punc-
turing clamp ring with integral gravel stop and medium sump with roof flange and
bottom outlet.
Available Options
-1 Deck Clamp Assembly -19 Clamp Collar w/Perforated SS
-1C Drain Receiver Clips Gravel Guard
(Min. Deck Opening 13.75" Dia.) -20 Galvanized Cast Iron Parts
-2 Drain Receiver -21 Galvanized Cast Iron Dome
ROOF DRAINS
SPECIFICATION
JOSAM 22080 Series coated cast iron Roof Drain with beehive dome, WEJLOC® non-
puncturing clamp ring with integral gravel stop and small sump with roof flange and
bottom outlet.
Available Options
-1 Deck Clamp Assembly -20 Galvanized Cast Iron Parts
-1C Drain Receiver Clips -21 Galvanized Cast Iron Dome
(Min. Deck Opening 10.75" Dia.) Only
-2 Drain Receiver -23 Rough Bronze Dome
-3 Deck Clamp Assembly and -VP Vandal-Proof Dome
Drain Receiver OUTLETS:
-3C Drain Receiver and Drain * -TSO Threaded Side Outlet
Receiver Clips -T Threaded Outlet
-10 Fixed Extension Collar, Cast -X Inside Caulk Outlet
Iron, (Specify Hgt) 1” Std.
-Y Hub Outlet w/Gasket
-10 -20 Fixed Ext. Collar, Galv., CONFORMS WITH ASTM-C564.
(Specify Hgt) 1” Std. -Z No-Hub Spigot Outlet
-17 2" High Solid Clamping Collar FOR OUTLET TYPE SPECIFY -T, -X, -Y or -Z
TYPE NO. PIPE SIZE LBS.
* Standard Drain Receiver cannot be used with -TSO option. Contact Factory. 22082 2 13
Deck Clamp cannot be used with - TSO option in 4” size. 22083 3 13
22084 4 13
78
Roof Drains_08.qxd 3/28/08 12:14 PM Page 79
ROOF DRAINS
22100 SERIES SMALL SUMP, Combination Drain/Overflow
APPLICATION
Used on small roofs, gutters or valleys of any construction. Integral outlets for roof
and overflow drainage in one-piece body for limited space installation. WEJLOC®
compression flashing clamps hold the membrane or flashing to the drain body. Small
beehive domes provide ample drainage for small roof decks and intercept debris.
SPECIFICATION
JOSAM 22100 Series coated cast iron combination Roof Drain and Overflow Drain
with cast iron domes, two WEJLOC® non-puncturing clamp rings with integral gravel
stops, integral cast iron standpipe in cast iron deck flange and dual no-hub bottom
outlets.
Available Options
-10 Fixed Extension Collar, Cast Iron, -VP Vandal-Proof Dome
(Specify Hgt) 1” Std. -IRMA Perforated Stainless Steel
-20 Galvanized Cast Iron Parts Extension FOR OUTLET TYPE SPECIFY -Z
-23 Rough Bronze Dome OUTLETS: TYPE NO. PIPE SIZE LBS.
ROOF DRAINS
-28 Cast Iron Dome for Overflow Drain -Z No-Hub Spigot Outlets 22102 2 37
-33 Stainless Mesh Screen-Covered Dome 22103 3 37
22104 4 38
SPECIFICATION
JOSAM 22200 Series coated cast iron 12” diameter Combination Roof Drain and
Overflow Drain, one WEJLOC® non-puncturing clamp ring with integral gravel stop
and cast iron dome, one non-puncturing clamp ring with solid waterguard, double
drain receiver and clips and cast iron beehive dome.
Available Options
* 5-5/8" DIM. (BODY HGT.) VARIES BY OUTLET SIZE
-10 Fixed Extension Collar, Cast Iron, -IRMA Perforated Stainless Steel WITH -T AND -X CONNECTIONS.
(Specify Hgt) 1” Std. Extensions
-20 Galvanized Cast Iron Parts OUTLETS: FOR OUTLET TYPE SPECIFY -T, -X or -Z
-23 Rough Bronze Domes -T Threaded Outlets TYPE NO. PIPE SIZE LBS. TYPE NO. PIPE SIZE LBS.
-33 Stainless Mesh Screen-Covered Domes -X Inside Caulk Outlets 22202 2 55 22205 5 55
-VP Vandal-Proof Domes -Z No-Hub Spigot Outlets 22203 3 55 22206 6 55
22204 4 55
Available Options
-10 Fixed Extension Collar, Cast Iron, -IRMA Perforated Stainless Steel
(Specify Hgt) 4” Std. Extensions FOR OUTLET TYPE SPECIFY -T, -X, -Y or -Z
-20 Galvanized Cast Iron Parts OUTLETS: TYPE NO. PIPE SIZE LBS. TYPE NO. PIPE SIZE LBS.
-23 Rough Bronze Domes -T Threaded Outlets 22502 2 65 22506 6 65
-28 Cast Iron Dome for Overflow Drains -X Inside Caulk Outlets 22503 3 65 22508 8 65
-33 Stainless Mesh Screen-Covered Domes -Y Hub Outlets w/Gasket, 2”-4” 22504 4 65 22509-Z 10† 65
-VP Vandal-Proof Domes -Z No-Hub Spigot Outlets
22505 5 65 † 10” AVAILABLE IN NO-HUB ONLY
79
Roof Drains_08.qxd 5/2/08 1:05 PM Page 80
ROOF DRAINS
23500 SERIES LARGE SUMP, Promenade Top
APPLICATION 23500 SLOT WIDTH 5/16"
Used on promenade decks and roofs where foot traffic or light- to medium-weight 23500-50 SLOT WIDTH 1/4"
vehicles will be present. Large square grate provides ample free area for proper 23500-51 SLOT WIDTH 1/4"
drainage and has narrow slotted openings for pedestrian safety and for the intercep-
tion of debris. WEJLOC® compression flashing clamp holds the membrane or flashing
to the drain body.
SPECIFICATION
JOSAM 23500 Series coated cast iron Roof Drain, square pedestrian grate set in
square secured frame, WEJLOC® non-puncturing flashing collar with weepholes for 2"
roof fill and large sump with wide roof flange and bottom outlet.
Available Options
▼ -AE LEVELEZE® Adjustable Extension ▼ -18 Extra Deep Sump
▼ -IRMA Perforated Stainless Steel Ext. -20 Galvanized Cast Iron Parts
-CR Clamping Drain Receiver -36 Ductile Iron Grate
-PG Parking Grate, (Cast Iron Top Only)
110 Sq. In. Free Area -37-50 Heavy-Duty Ductile Iron
ROOF DRAINS
23500-6 SERIES LARGE SUMP with -6 Extra Wide Flange Drain Body
APPLICATION 23500-6 SLOT WIDTH 5/16"
Used on promenade decks and roofs where foot traffic or light- to medium-weight 23500-6-50 SLOT WIDTH 1/4"
vehicles will be present. Large square grate ensures ample free area for proper 23500-6-51 SLOT WIDTH 1/4"
drainage and has narrow slot openings for pedestrian safety and the interception of
debris. WEJLOC® compression flashing clamp holds the membrane or flashing to the
drain body. Extra-wide deck flange provides positive support and large bonding sur-
face for liquid applied membranes.
SPECIFICATION
JOSAM 23500-6 Series coated cast iron Roof Drain, square pedestrian grate set in a
square secured frame, WEJLOC® non-puncturing flashing collar with weepholes for 2"
roof fill and large sump with extra wide roof flange and bottom outlet, inside caulk
connection.
OPTIONS N/A:
-CR, -1C, -2, -3, -3C, -4
ROOF DRAINS
23500-AE SERIES LARGE SUMP with -AE Threaded Adjustable Extension
APPLICATION 23500-AE SLOT WIDTH 5/16"
Used on promenade decks and roofs where foot traffic or light- to medium-weight 23500-AE-50 SLOT WIDTH 1/4"
vehicles will be present. Large square grate provides ample free area for proper 23500-AE-51 SLOT WIDTH 1/4"
drainage and has narrow slotted openings for pedestrian safety and for the intercep-
tion of debris. WEJLOC® compression flashing clamp holds the membrane or flashing
securely to the drain body. Adjustable top accommodates insulation of roof fill depth
and ensures proper grate elevation at the finished deck surface.
SPECIFICATION
JOSAM 23500-AE Series coated cast iron LEVELEZE® Roof Drain, square pedestrian
grate set in square secured frame, WEJLOC® non-puncturing flashing collar with weep-
holes for 2" roof fill, bolted support ring, adjustable top with wide roof flange and
large sump with anchor flange and bottom outlet.
ROOF DRAINS
CONFORMS WITH ASTM-C564.
THIS DIM. IS 5-3/4" FOR 23508-AE-T.
▲ WITH CLAMP RING 2-1/4" MIN. 4-1/4" MAX.
ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
SPECIFICATION
JOSAM 23500-18 Series coated cast iron Roof Drain, square pedestrian grate set in
square secured frame, WEJLOC® non-puncturing flashing collar with weepholes, for
2" roof fill, deep sump with wide roof flange and bottom outlet.
81
Roof Drains_08.qxd 3/28/08 12:14 PM Page 82
ROOF DRAINS
23500-IRMA SERIES LARGE SUMP with Perforated Stainless Steel Extension
APPLICATION 23500-IRMA SLOT WIDTH 5/16"
Used on promenade decks and roofs where pedestrian traffic will be present and 23500-IRMA-50 SLOT WIDTH 1/4"
where the "Insulated Membrane Assembly," also known as, "Inverted Membrane 23500-IRMA-51 SLOT WIDTH 1/4"
Assembly" is specified. Insulation is installed on top of the waterproof membrane
and gravel ballast is applied over the insulation. Drain is furnished with a perforated
stainless steel extension, made to the specified height of the insulation combined
with the depth of the ballast. Large square grate provides ample free area for proper
drainage and has narrow slotted openings for pedestrian safety and for interception
of debris. WEJLOC® compression flashing clamp holds the membrane or flashing
securely to the drain body.
SPECIFICATION
JOSAM 23500-IRMA Series coated cast iron Roof Drain, square pedestrian grate set
in square secured frame, frame support collar, perforated stainless steel extension fil-
ter, WEJLOC® non-puncturing clamp ring and large sump with wide roof flange and
bottom outlet.
OPTION N/A:
ROOF DRAINS
-4
23500-IRMA-6 SERIES LARGE SUMP with -6 Wide Flange & Perforated SS Extension
APPLICATION 23500-IRMA-6 SLOT WIDTH 5/16"
Used on promenade decks and roofs where pedestrian traffic will be present and 23500-IRMA-6-50 SLOT WIDTH 1/4"
where the "Insulated Membrane Assembly," also known as, "Inverted Membrane 23500-IRMA-6-51 SLOT WIDTH 1/4"
Assembly" is specified. Insulation is installed on top of the waterproof membrane
and gravel ballast is applied over the insulation. Drain is furnished with a perforated
stainless steel extension, made to the specified height of the insulation combined
with the depth of the ballast. Large square grate provides ample free area for proper
drainage and has narrow slotted openings for pedestrian safety and for interception
of debris. WEJLOC® compression flashing clamp holds the membrane or flashing
securely to the drain body. With extra-wide deck flange for positive support and
large bonding surface for liquid applied membranes.
SPECIFICATION
JOSAM 23500-IRMA-6 Series coated cast iron Roof Drain, square pedestrian grate set
in square secured frame, frame support collar, perforated stainless steel extension fil-
ter, WEJLOC® non-puncturing clamp ring and large sump with extra wide roof flange
and bottom outlet inside caulk connection.
OPTION N/A:
-4
82
Roof Drains_08.qxd 3/28/08 12:14 PM Page 83
ROOF DRAINS
23510 SERIES LARGE SUMP with Extra Heavy-Duty Parking Grate
APPLICATION 1-1/16" SQ. HOLES
Used on roofs or decks designed for heavy traffic, such as parking decks and loading
docks. Large round extra heavy-duty grate provides ample free area for proper
drainage. WEJLOC® compression flashing clamp holds the membrane or flashing
securely to the drain body.
SPECIFICATION
JOSAM 23510 Series coated cast iron Roof Drain, round extra heavy-duty grate set in
round secured frame, WEJLOC® non-puncturing flashing collar with weepholes, for 2"
roof fill and large sump with wide roof flange and bottom outlet.
Available Options
-CR Clamping Drain Receiver -20 Galvanized Cast Iron Parts
-1 Deck Clamp Assembly -36 Ductile Iron Grate
-1C Drain Receiver Clips (Cast Iron Top Only)
(Min. Deck Opening 16.5" Dia.) -50 Satin Finish Nikaloy Top
ROOF DRAINS
-2 Drain Receiver -51 Satin Finish Bronze Top
-3 Deck Clamp Assembly -VP Vandal-Proof Grate
and Drain Receiver OUTLETS:
-3C Drain Receiver and -T Threaded Outlet
Drain Receiver Clips -X Inside Caulk Outlet
-10 Fixed Ext. Collar, Cast Iron, -Y Hub Outlet w/Gasket 2"-4" THIS DIM. IS 5-3/4" FOR 23518-T.
(Specify Hgt) 4" Std.
-Z No-Hub Spigot Outlet CONFORMS WITH ASTM-C564.
-10-20 Fixed Ext. Collar, Galvanized, ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
(Specify Hgt) 4" Std.
FOR OUTLET TYPE SPECIFY -T, -X, -Y or -Z
TYPE NO. PIPE SIZE LBS. TYPE NO. PIPE SIZE LBS.
23512 2 72 23515 5 73
23513 3 72 23516 6 74
23514 4 73 23518 8 76
SPECIFICATION
JOSAM 23710 Series coated cast iron Roof Drain, round pedestrian grate set in
square secured frame, non-puncturing flashing collar with weepholes for 2" roof fill
and medium sump with roof flange and bottom outlet.
Available Options
-1 Deck Clamp Assembly -20 Galvanized Cast Iron Parts
-1C Drain Receiver Clips (Min. Deck -50 Satin Finish Nikaloy Top
Opening 13.75" Dia.) -51 Satin Finish Bronze Top
-2 Drain Receiver -VP Vandal-Proof Grate
-3 Deck Clamp Assembly OUTLETS:
and Drain Receiver -66 No-Hub Side Outlet, 2"- 6"
-3C Drain Receiver and -T Threaded Outlet
Drain Receiver Clips
-X Inside Caulk Outlet
-12 Extended Flashing Collar, Cast
Iron, (Specify Height) 1” Std. -Z No-Hub Spigot Outlet
FOR OUTLET TYPE SPECIFY -T, -X or -Z
TYPE NO. PIPE SIZE D E LBS.
23712 2 4-3/4 6-1/4 32
23713 3 4-3/4 6-1/4 32
23714 4 4-1/2 6-1/4 32
23715 5 4-3/8 6 36
23716 6 4 5-3/4 36
83
Roof Drains_08.qxd 3/28/08 12:14 PM Page 84
ROOF DRAINS
23730 SERIES SMALL SUMP, Promenade Top
APPLICATION SLOT WIDTH 3/16"
Used on smaller-sized promenade deck areas and roofs where foot traffic or light
vehicles will be present. Smaller round grate set in a square frame provides ample
free area for proper drainage and has narrow slotted openings for pedestrian safety
and for the interception of debris. Flashing clamp holds the membrane or flashing
securely to the drain body.
SPECIFICATION
JOSAM 23730 Series coated cast iron Roof Drain, round pedestrian grate set in
square secured frame, non-puncturing flashing collar with weepholes for 2" roof fill
and small sump with wide roof flange and bottom outlet
Available Options
-1 Deck Clamp Assembly -20 Galvanized Cast Iron Parts
-1C Drain Receiver Clips -50 Satin Finish Nikaloy Top
(Min. Deck Opening 10.25" Dia.) -51 Satin Finish Bronze Top
ROOF DRAINS
SPECIFICATION
JOSAM 23740 Series coated cast iron Roof Drain, square heavy-duty ductile iron
undergrate with Nikaloy top grate set in square secured frame, non-puncturing
flashing collar with weepholes, for 2" roof fill and small sump with roof flange and
bottom outlet.
Available Options
-1 Deck Clamp Assembly -20 Galvanized Cast Iron Parts
-1C Drain Receiver Clips (Min. Deck -51 Satin Finish Bronze Top
Opening 10.25" Dia.) -VP Vandal-Proof Grate
-2 Drain Receiver OUTLETS:
-3 Deck Clamp Assembly and * -TSO Threaded Side Outlet
Drain Receiver -T Threaded Outlet
-3C Drain Receiver and Drain -X Inside Caulk Outlet
Receiver Clips
-Y Hub Outlet w/Gasket
-12 Extended Flashing Collar, Cast
Iron, (Specify Height) 1” Std. -Z No-Hub Spigot Outlet
CONFORMS WITH ASTM-C564.
-12-20 Extended Flashing Collar, Galv.,
(Specify Height) 1” Std. *Cannot be used with Drain Receiver. FOR OUTLET TYPE SPECIFY -T, -X, -Y or -Z
TYPE NO. PIPE SIZE LBS.
23742 2 18
23743 3 18
23744 4 18
84
Roof Drains_08.qxd 3/28/08 12:14 PM Page 85
ROOF DRAINS
24020 SERIES MEDIUM SUMP, SUPER-FLO® Grate for Composition Deck
APPLICATION 24020 SLOT WIDTH 3/8"
Used on promenade roof decks where waterproof traffic-bearing elastomeric covering 24020-50 SLOT WIDTH 3/16"
is to be applied. Wide deck flange provides proper area for bonding of composition 24020-51 SLOT WIDTH 3/16"
roof deck covering and distributes the drain’s weight over a broad area for positive
support. Mid-sized, round medium-duty SUPER-FLO® grate assures rapid drainage
and protects drain and connected piping from debris.
SPECIFICATION
JOSAM 24020 Series coated cast iron SUPER-FLO® Roof Drain, round medium-duty
anti-tilting grate with perimeter drainage slots, set in round, non-puncturing mem-
brane clamp ring and medium sump with 4" wide deck flange and bottom outlet,
inside caulk connection.
Available Options
-1 Deck Clamp Assembly -38 Less Grate
-20 Galvanized Cast Iron Parts -50 Satin Finish Nikaloy Top
ROOF DRAINS
-29 Sediment Bucket, Cast Iron -51 Satin Finish Bronze Top
-29-20 Sediment Bucket, Galvanized -VP Vandal-Proof Grate
-31 Chain Anchored Grate OUTLET:
-36 Ductile Iron Grate -X Inside Caulk Outlet
(Cast Iron Top Only)
SPECIFICATION
JOSAM 24030 Series coated cast iron SUPER-FLO® Roof Drain, round medium-duty
anti-tilting grate with perimeter drainage slots, set in round, non-puncturing mem-
brane clamp ring and large sump with 4" wide deck flange and bottom outlet, inside
caulk connection.
Available Options
-1 Deck Clamp Assembly -50 Satin Finish Nikaloy Top
-20 Galvanized Cast Iron Parts -51 Satin Finish Bronze Top
-29 Sediment Bucket, Cast Iron -VP Vandal-Proof Grate
-29 -20 Sediment Bucket, Galvanized OUTLET:
-31 Chain Anchored Grate -X Inside Caulk Outlet
-36 Ductile Iron Grate
(Cast Iron Top Only)
85
Roof Drains_08.qxd 4/22/08 6:34 PM Page 86
ROOF DRAINS
24040 SERIES MEDIUM SUMP, SUPER-FLO® Grate for Composition Deck
APPLICATION 24040 SLOT WIDTH 3/8"
Used on promenade roof decks or anywhere that an elastomeric or liquid applied 24040-50 SLOT WIDTH 3/16"
waterproofing is to be used beneath a 2” pour of concrete or asphalt. Wide deck 24040-51 SLOT WIDTH 3/16"
flange provides proper area for bonding of waterproofing material and distributes the
drain’s weight over a broad area for positive support. Mid-sized, round medium-duty
SUPER-FLO® Grate assures rapid drainage and protects drain and connected piping
from debris. The 2” extension ensures that the grate and rim are flush with the fin-
ished deck covering.
SPECIFICATION
JOSAM 24040 Series coated cast iron SUPER-FLO® Roof Drain, round medium-duty
anti-tilting grate with perimeter drainage slots, extension, medium sump with 4"
wide deck flange and bottom outlet inside caulk connection.
Available Options
-1 Deck Clamp Assembly -38 Less Grate
ROOF DRAINS
-20 Galvanized Cast Iron Parts -50 Satin Finish Nikaloy Top
-29 Sediment Bucket, Cast Iron -51 Satin Finish Bronze Top
-29-20 Sediment Bucket, Galvanized -VP Vandal-Proof Grate
-31 Chain Anchored Grate OUTLET:
-36 Ductile Iron Grate -X Inside Caulk Outlet
(Cast Iron Top Only)
SPECIFICATION
JOSAM 24050 Series coated cast iron Garage Drain with wide support flange, weep-
holes, round special-duty grate and bottom outlet inside caulk connection.
Available Options
-1 Deck Clamp Assembly -36 Ductile Iron Grate
-12 Extended Flashing Collar, (Cast Iron Top Only)
Cast Iron, (Specify Hgt.) 1” Std. -50 Satin Finish Nikaloy Top
-20 Galvanized Cast Iron Parts -51 Satin Finish Bronze Top
-29 Sediment Bucket, Cast Iron -VP Vandal-Proof Grate
-29-20 Sediment Bucket, Galvanized OUTLET:
-31 Chain Anchored Grate -X Inside Caulk Outlet
86
Roof Drains_08.qxd 3/28/08 12:14 PM Page 87
ROOF DRAINS
24060 SERIES LARGE SUMP, Special-Duty Grate for Composition Deck
APPLICATION 1-1/16" SQ. HOLES
Used in parking garages or docks for heavy traffic, where an elastomeric or liquid
applied waterproofing is to be applied beneath a 2" pour of concrete or asphalt.
Wide deck flange provides proper area for bonding of composition roof deck cover-
ing and distributes the drain’s weight over a broad area for positive support. Large
diameter, round special-duty SUPER-FLO® Grate assures rapid drainage and sediment
bucket protects drain sump and connected piping from debris.
SPECIFICATION
JOSAM 24060 Series coated cast iron Roof Drain, round special-duty grate and large
sump with 4" wide deck flange and bottom outlet, inside caulk connection.
Available Options
-1 Deck Clamp Assembly -50 Satin Finish Nikaloy Top
-20 Galvanized Cast Iron Parts -51 Satin Finish Bronze Top
-29 Sediment Bucket, Cast Iron -VP Vandal-Proof Grate
ROOF DRAINS
-29-20 Sediment Bucket, Galvanized OUTLET:
-31 Chain Anchored Grate -X Inside Caulk Outlet
SPECIFICATION
JOSAM 24200 Series coated cast iron adjustable ALL-LEVEL Roof Drain, round pedes-
trian grate set in round anchored frame leveled on adjustable threaded rods, remov-
able perforated stainless steel filter, concrete forming and retaining ring and large
sump with wide flange and bottom outlet inside caulk connection.
Available Options
-1 Deck Clamp Assembly -60-50 Square Top,
-20 Galvanized Cast Iron Parts Satin Finish Nikaloy
-VP Vandal-Proof Grate -60-51 Square Top,
Satin Finish Bronze
-50 Satin Finish Nikaloy Top
OUTLET: ■ "A" DIM. TO BE SPECIFIED ON ORDER. STD. 3" MAX. 12"
-51 Satin Finish Bronze Top GRATE FREE AREA – 30.2 SQ. IN.
-X Inside Caulk Outlet
-60 Square Top, Cast Iron
FOR OUTLET TYPE SPECIFY -X
TYPE NO. PIPE SIZE LBS. TYPE NO. PIPE SIZE LBS.
24202 2 53 24205 5 56
24203 3 54 24206 6 57
24204 4 55
87
Roof Drains_08.qxd 3/28/08 12:14 PM Page 88
ROOF DRAINS
24500 SERIES SHALLOW SUMP, Sill Type, Bronze Dome
APPLICATION 24500-35 SLOT WIDTH 1/8"
Used in parapets, small balconies, sills, cornices, canopies, gutters and other small
overhanging areas where drainage of rainwater is required. Flashing clamp design
permits removal of dome strainer without disturbing flashing or waterproofing
membranes.
SPECIFICATION
JOSAM 24500 Series coated cast iron Sill Drain, secured low bronze dome, bronze
clamp ring and shallow sump with flashing flange and bottom outlet threaded
connection.
Available Options
▼ -45 Body with 45 Degree -35 Flat Grate 2” AND 3” SIZE
Threaded Outlet -50 Satin Finish Nikaloy Top
▼ -90 Body with 90 Degree -51 Satin Finish Bronze Top
Threaded Outlet -VP Vandal-Proof Dome
ROOF DRAINS
4” SIZE
SPECIFICATION SPECIFICATION
JOSAM 24500-45 Series coated cast iron Sill Drain, secured low bronze dome, bronze JOSAM 24500-90 Series coated cast iron Sill Drain, secured low bronze dome, bronze
clamp ring and shallow sump with flashing flange and 45º side outlet threaded clamp ring and shallow sump with flashing flange and 90° side outlet threaded
connection. connection.
FOR OUTLET TYPE, SPECIFY -T. FOR OUTLET TYPE, SPECIFY -T.
DOME DOME
FREE FREE
PIPE AREA PIPE AREA
TYPE NO. SIZE SQ. IN. B C D E F H LBS. TYPE NO. SIZE SQ. IN. B C D E F H LBS.
24502-45 2 4.4 3-3/4 6 1-1/2 4-1/2 2-3/4 1-1/2 8 24502-90 2 4.4 3-3/4 6 2-1/2 4 2-3/4 1-1/2 8
24503-45 3 7.3 4-3/4 7-1/4 1-1/2 4-3/4 2-3/4 1-7/8 11 24503-90 3 7.3 4-3/4 7-1/4 3 5 3-1/2 1-7/8 11
24504-45 4 7.3 4-3/4 7-1/4 2-3/8 5-5/8 2-1/8 1-7/8 11 24504-90 4 7.3 4-3/4 7-1/4 3-1/2 6 3-1/2 1-7/8 11
ROOF DRAINS
24700 SERIES PARAPET TYPE, Sloping Grate
APPLICATION
Used at the junction of the roof and the parapet where perimeter or emergency roof
drainage through a threaded side outlet is required. Sloping grate provides ample
drainage and is slotted to prevent entrance of debris. Flashing and membrane are
positively secured to the drain body with a compression clamp.
SPECIFICATION
JOSAM 24700 Series coated cast iron Roof Drain, parapet type, removable sloping
bronze grate, flashing clamp, shallow sump with flashing flange and side outlet
threaded connection.
Available Options
▼ -45 Body with 45 Degree -50 Satin Finish Nikaloy Grate
Threaded Outlet -51 Satin Finish Bronze Grate
-20 Galv. Cast Iron Parts -61 Downspout Elbow, Cast Iron
-22 Cast Iron Grate -61-20 Downspout Elbow,
ROOF DRAINS
-24 Rough Nikaloy Grate Galvanized
SPECIFICATION
JOSAM 24700-45 Series coated cast iron Roof Drain, parapet type, removable sloping
bronze grate, flashing clamp and shallow sump with flashing flange and 45º side out-
let threaded connection.
ROOF DRAINS
24720 SERIES PARAPET TYPE, Angle Grate
APPLICATION
Used at the junction of the roof and the parapet where perimeter or emergency roof
drainage through a threaded side outlet is required. Angle grate provides ample
drainage and is slotted to prevent entrance of debris. Flashing and membrane are
positively secured to the drain body with a compression clamp.
SPECIFICATION
JOSAM 24720 Series coated cast iron Roof Drain, parapet type, secured angle grate
integral with flashing clamp, shallow sump with flashing flange and side outlet
threaded connection.
Available Options
▼ -45 Body with 45 Degree -51 Satin Finish Bronze Grate
Threaded Outlet -61 Downspout Elbow, Cast Iron
-20 Galv. Cast Iron Parts -61-20 Downspout Elbow,
-23 Rough Bronze Grate Galvanized
ROOF DRAINS
SPECIFICATION
JOSAM 24720-45 Series coated cast iron Roof Drain, parapet type, secured angle
grate integral with flashing clamp and shallow sump with flashing flange and 45º
side outlet threaded connection.
ROOF DRAINS
24900 SERIES PARAPET TYPE, Angle Dome
APPLICATION
Used at the junction of the roof and the parapet where perimeter or emergency
drainage of rainwater is required and a 135° cant is specified. Extra-large sloping
grate provides ample drainage and is slotted to prevent entrance of debris. Flashing
and membrane are positively secured to the drain body with a compression clamp,
with threaded side outlet.
SPECIFICATION
JOSAM 24900 Series coated cast iron Roof Drain, parapet type, secured bronze dome
integral with flashing clamp, flashing flange and side outlet threaded connection.
Available Options
-20 Galvanized Cast Iron Parts
-24 Rough Nikaloy Dome
-50 Satin Finish Nikaloy Dome
-51 Satin Finish Bronze Dome
ROOF DRAINS
-61 Downspout Elbow, Cast Iron
-61-20 Downspout Elbow, Galvanized
-VP Vandal-Proof Dome
SPECIFICATION
JOSAM 25000 Series coated cast iron Roof Drain, parapet scupper-sleeve type, flash-
ing clamp, tubular body with flashing flange and adjustable wall collar.
Available Options
-20 Galvanized Cast Iron Parts
-62 Ornamental Gargoyle, Cast Iron
-62-20 Ornamental Gargoyle, Galvanized
91
Roof Drains_08.qxd 5/2/08 6:19 PM Page 92
ROOF DRAINS
25010 SERIES DOWNSPOUT NOZZLE
APPLICATION
Used as a parapet overflow or at the base of a wall where a concealed leader dis-
charges rainwater to the ground. Nozzle design diverts water away from the building,
eliminating wall stains. Wall flange covers rough opening and serves as an anchor.
SPECIFICATION
JOSAM 25010 Series cast bronze Downspout Nozzle, loose wall flange and inlet
threaded connection.
Available Options
-24 Rough Nikaloy
-51 Satin Finish Bronze
-BS Bird Screen
OUTLET:
-T Threaded Outlet
ROOF DRAINS
SPECIFICATION
JOSAM 25500 Series coated cast iron FLO-SEPTOR® Roof Drain, cast iron internal
dome strainer, combined WEJLOC® non-puncturing clamp ring and solid water dam
and large sump with wide roof flange and bottom outlet.
Available Options
-CR Clamping Drain Receiver OUTLETS:
-1 Deck Clamp Assembly -66 No-Hub Side Outlet
-2 Drain Receiver -T Threaded Outlet
-3 Deck Clamp Assembly -X Inside Caulk Outlet
and Drain Receiver -Y Hub Outlet w/Gasket
-20 Galvanized Cast Iron Parts -Z No-Hub Spigot Outlet
92
Roof Drains_08.qxd 3/28/08 12:14 PM Page 93
ROOF DRAINS
25520 SERIES MEDIUM SUMP, FLO-SEPTOR®
APPLICATION
Used on roof areas to receive wastewater from air conditioning units, cooling towers
and other mechanical equipment installed on the roof. The solid water dam prevents
storm water from entering the waste line. The internal dome strainer provides ample
drainage and prevents entry of debris into the medium sump.
SPECIFICATION
JOSAM 25520 Series coated cast iron FLO-SEPTOR® Roof Drain, cast iron internal
dome strainer, combined non-puncturing clamp ring and solid water dam and medium
sump with roof flange and bottom outlet.
Available Options
-1 Deck Clamp Assembly
-2 Drain Receiver
-3 Deck Clamp Assembly and Drain Receiver
-20 Galvanized Cast Iron Parts
ROOF DRAINS
OUTLETS:
-66 No-Hub Side Outlet
-T Threaded Outlet
-X Inside Caulk Outlet
-Z No-Hub Spigot Outlet
SPECIFICATION
JOSAM 25540 Series coated cast iron FLO-SEPTOR® Roof Drain, bronze internal dome
strainer, combined non-puncturing clamp ring and solid water dam and small sump
with roof flange and bottom outlet.
Available Options
-1 Deck Clamp Assembly
-2 Drain Receiver
-3 Deck Clamp Assembly and Drain Receiver
-20 Galvanized Cast Iron Parts
OUTLETS:
* -TSO Threaded Side Outlet
-T Threaded Outlet
-X Inside Caulk Outlet
-Y Hub Outlet w/Gasket
-Z No-Hub Spigot Outlet
93
Roof Drains_08.qxd 4/30/08 10:50 AM Page 94
ROOF DRAINS
26200 SERIES EXPANSION JOINT
APPLICATION
Used with all types of vertical drainage conductors, leaders, stacks, vent or soil lines,
where contraction and expansion movements must be compensated for to prevent
rupturing of lines and damage to the building construction.
SPECIFICATION
JOSAM 26200 Series coated cast iron Expansion Joint, schedule 80 PVC sleeve, pack-
ing gland with bolted pressure ring, male inlet and female outlet threaded connection.
Available Options
-20 Galvanized Cast Iron Parts
ROOF DRAINS
TYPE NO. PIPE SIZE LBS. TYPE NO. PIPE SIZE LBS.
26202 2 9 26206 6 20
26203 3 11 26208 8 37
26204 4 12 26209 10 70
26205 5 16
SPECIFICATION
JOSAM 26440 Series coated cast iron Stack Fitting with counterflashing recess,
threaded stack and extension connections.
Available Options
-20 Galvanized Cast Iron Parts
Single Thread Can Be Furnished When Specified on Order.
94
Roof Drains_08.qxd 3/28/08 12:14 PM Page 95
ROOF DRAINS
26450 SERIES VENT STACK FLASHING SLEEVE
APPLICATION
Used as a counterflashing sleeve where roofing membranes are terminated at the
stack, which protrudes through the roof. A caulk joint is made between the upper
hub of the sleeve and stack, effectively waterproofing the entire assembly.
SPECIFICATION
JOSAM 26450 Series coated cast iron Stack Sleeve, with counterflashing and caulking
recesses.
Available Options
-20 Galvanized Cast Iron Parts
ROOF DRAINS
TYPE NO. PIPE SIZE B LBS.
26451-1/2 1-1/2 3 3
26452 2 3-1/2 3
26453 3 4-3/4 5
26454 4 5-5/8 6
26455 5 6-3/4 8
26456 6 7-3/4 9
SPECIFICATION
JOSAM 26700 Series coated cast iron Vandal-Proof hooded Vent Cap, with large frost-proof
openings, counterflashing collar, deep protective hood and recessed securing screws.
Available Options
-20 Galvanized Cast Iron Parts
-63 All Rough Bronze
-65 All Rough Nikaloy
DOME
FREE
PIPE AREA
TYPE NO. SIZE SQ. IN. B C D E F LBS.
26701-1/2 1-1/2 3.7 2-5/8 2 4-1/2 5-3/4 1 4
26702 2 6.8 3-1/4 2 5-1/4 5-3/4 1 5
26702-1/2 2-1/2 15.3 4-3/8 2-1/2 6-7/8 8-1/4 3/4 12
26703 3 15.3 4-3/8 2-1/2 6-7/8 8-1/4 1-1/8 12
26704 4 27.4 5-1/2 2-1/2 8 8-1/4 1-1/8 13
26705 5 41.6 6-1/2 2-1/2 10-1/8 11-3/4 1-1/8 22
26706 6 58.0 7-1/2 2-3/4 11-3/4 11-3/4 1-1/8 23
95
Roof Drains_08.qxd 4/22/08 6:39 PM Page 96
ROOF DRAINS
28600 SERIES LARGE SUMP, FLO-SET®
APPLICATION
Used on roofs of any size, for any type of construction where a predetermined rate of
flow has been specified to limit pipe sizing or flooding of undersized pre-existing
storm drainage systems. Adjustable calibrated vanes can be factory set to prescribed
G.P.M. flow rates as required. Large slotted dome provides maximum free area for
quick drainage of rainwater and protects the drain sump and connected piping from
debris. WEJLOC® compression flashing clamp holds the membrane or flashing secure-
ly to the drain body.
SPECIFICATION
JOSAM 28600 Series coated cast iron FLO-SET® Roof Drain with large secured dome,
adjusted calibrated Vandal-Proof vane collar, WEJLOC® non-puncturing clamp ring
with stationary vanes and integral gravel stop, large sump with wide roof flange, and
bottom outlet.
Available Options
ROOF DRAINS
-3C Drain Receiver and Drain -T Threaded Outlet\ FOR OUTLET TYPE SPECIFY -T, -X, -Y or -Z
Receiver Clips
-X Inside Caulk Outlet TYPE NO. PIPE SIZE LBS. TYPE NO. PIPE SIZE LBS.
-4 Secondary Flashing Clamp
-Y Hub Outlet w/Gasket, 2"-4" 28602 2 56 28605 5 58
(use with -AE only)
-Z No-Hub Spigot Outlet 28603 3 56 28606 6 60
28604 4 56
28600-AE SERIES LARGE SUMP, FLO-SET® with -AE Threaded Adjustable Ext.
APPLICATION
Used on roofs of any size, for any type of construction where a predetermined rate
of flow has been specified to limit pipe sizing or flooding of undersized pre-existing
storm drainage systems. Adjustable calibrated vanes can be factory set to prescribed
G.P.M. flow rates as required. Large slotted dome provides maximum free area for
quick drainage of rainwater and protects the drain sump and connected piping from
debris. WEJLOC® compression flashing clamp holds the membrane or flashing secure-
ly to the drain body. LEVELEZE® adjustable extension accommodates insulation of
variable thickness.
SPECIFICATION
JOSAM 28600-AE Series coated cast iron LEVELEZE® FLO-SET® Roof Drain, with
large secured dome, adjusted calibrated Vandal-Proof vane collar, WEJLOC® non-
puncturing clamp ring with stationary vanes and integral gravel stop, bolted
support ring, adjustable top with wide roof flange, large sump with anchor flange,
and bottom outlet.
ROOF DRAINS
29000 SERIES ISOLATION DECK DRAIN
APPLICATION
Used on decks where vibration or noise occur. The neoprene gasket isolates vibration
and sound from mechanical equipment rooms, studios, music rooms or heavy manu-
facturing areas and prevents transmission through the plumbing system.
SPECIFICATION
JOSAM 29000 Series coated cast iron Isolation Deck Drain with non-puncturing clamp
ring for standpipe, with bottom outlet connection.
Available Options
-CR Clamping Drain Receiver -17 2" High Solid Clamping Collar
-1 Deck Clamp Assembly -20 Galvanized Cast Iron Parts
-1C Drain Receiver Clips OUTLETS:
(Min. Deck Opening 16.5" Dia.) -66 No-Hub Side Outlet, 2"-6"
-2 Drain Receiver -T Threaded Outlet
ROOF DRAINS
-3 Deck Clamp Assembly -X Inside Caulk Outlet
and Drain Receiver -Y Hub Outlet w/Gasket, 2"-4"
-3C Drain Receiver and Drain -Z No-Hub Spigot Outlet
Receiver Clips
SPECIFICATION
JOSAM 29112 Series coated cast iron Roof Drain with large cast iron dome, non-
puncturing clamp ring with integral gravel stop, large sump with wide roof flange
and no-hub bottom outlet.
Available Options
-1 Deck Clamp Assembly -17 2" High Solid Clamping Collar
-2 Drain Receiver -20 Galvanized Cast Iron Parts
-3 Deck Clamp Assembly -VP Vandal-Proof Dome
and Drain Receiver OUTLET:
-10 Fixed Ext. Collar, C.I., -Z No-Hub Spigot Outlet
(Specify Hgt.) 4" Std.
-10-20 Fixed Ext. Collar, Galv.,
(Specify Hgt.) 4" Std.
97
Floor Drains_08.qxd 3/27/08 9:31 AM Page 98
FLOOR DRAINS
SUPER-FLO® Features
The two-piece Floor Drain bodies which are designed to be combined with any adjustable strainers offered by JOSAM have proven features which
make them the easiest and quickest drains of this type to install. The clean fine thread which is on all types of adjustable strainers provides uninter-
rupted adjustment at any time during construction up to and including the time the floor is being poured. Exclusive features are described and shown
below. For further details and specifications, refer to the specific series in this section.
COLLAR WEEPHOLES
Invertible collar provides extra Weepholes around double
vertical adjustment for strainer. drainage flange for seepage.
FLOOR DRAINS
KEYHOLE
Keyhole slots assure quick assembly
without removal of bolts. THREADS
Heavy collar designed to accept
all JOSAM exclusively threaded
strainers.
PRIMER TAP
1/2” Primer Tap Connection with
plug, standard on some series, WEJLOC®
optional (-50) on others. Exclusive compression "wedge lock"
provides positive non-puncturing bond of
waterproofing membrane to drain.
JIFFEE-SET
JOSAM Floor Drains feature JIFFEE-SET connections with MULTI-TITE® service
weight (SV) soil pipe gaskets, conforming to ASTM Standard C564 in 2, 3, and 4
inch sizes for labor-saving assembly to service weight cast iron, no-hub cast iron,
PVC and ABS pipe. Merely lubricate gasket and pipe, set drain in place, push
down until top of pipe contacts built-in stop and the joint is complete.
98
Floor Drains_08.qxd 3/27/08 9:31 AM Page 99
FLOOR DRAINS
How To Order Floor Drain/Strainer Combinations
Unless optional materials are specified, standard material shown in Specification will be provided. Last digit indicates outlet size. All
adjustable strainers and accessories can be used with the 30000, 30000-PD, 30000-TSO, 30002-ST, 30304-Z and 30500 Series Drain Bodies.
FLOOR DRAINS
FLOOR DRAINS • Pictorial Selection Guide
STRAINERS
A SERIES AD SERIES AF SERIES C SERIES D SERIES E SERIES
SUPER-FLO® Strainer Flashing Clamp Strainer Vinyl Tile Strainer NON-CLOG Strainer with Dome Strainer Tractor Strainer
Integral Bucket
Page 110 Page 110 Page 110 Page 111 Page 111 Page 111
STRAINERS
E1 SERIES E2 SERIES E3 SERIES F SERIES F4/F6 SERIES F8/F9 SERIES
Extended Rim Strainer Indirect Waste Strainer Indirect Waste Strainer Threaded Cover Strainer, Round Funnel Assemblies Oval Funnel Assemblies
Secondary Grate
Page 112 Page 112 Page 112 Page 113 Page 113 Page 113
99
Floor Drains_08.qxd 3/27/08 9:31 AM Page 100
Page 114 Page 114 Page 114 Page 115 Page 115 Page 115
STRAINERS
T SERIES W SERIES WF6A/6S SERIES 30802-4CP 30900-9AD 31000
Hinged Grate Strainer Extension Composition Deck Strainers Shallow Trap & Wide Flange Body Assy. Body with 5" Round
Chrome-Plated Strainer w/Flashing Clamp Strainer Nikaloy Strainer
FLOOR DRAINS
Page 116 Page 116 Page 116 Page 123 Page 123 Page 123
BODIES ONLY
30000 30000-PD 30000-TSO 30002-ST 30304-Z 30500
Body Assembly Security Body Assy. Body Assy. with Body Assy. with No-Hub C.I. Body Body with Trap & Cleanout
for Prisons Threaded Side Outlet Shallow Trap
Page 117 Page 117 Page 118 Page 118 Page 119 Page 119
Page 120 Page 120 Page 120 Page 120 Page 121 Page 121
100
Floor Drains_08.qxd 3/27/08 9:31 AM Page 101
Page 121 Page 121 Page 122 Page 122 Page 122 Page 122
ROUND-TOP DRAINS
32100 32100-39 32100-AE 32100-AE-LC1-88 32100-AE-TG 32100-TG
9" Top, Medium-Duty Drain 9" Top with Solid 9" Top, Adjustable Collar 9" Top, Key-Lock Drain, 9" Top Tractor Drain, 9" Tractor Top Drain
Cast-Iron Cover Adjustable Collar Adjustable Collar
FLOOR DRAINS
Page 124 Page 124 Page 125 Page 126 Page 126 Page 126
ROUND-TOP DRAINS
32150 32160 32200 32200-AE 32200-AE-SD 32200-SD
Two 9" Top Blood Drains, 9" Tractor Top Drain 12-5/8" Top Medium-Duty 12-5/8" Top Medium-Duty 12-5/8" Top Special-Duty 12-5/8" Top Special-Duty
Extra-Heavy-Duty Grate Drain, SUPER-FLO® Grate Drain, Adjustable Collar Drain, Adjustable Collar Garage Drain
Page 127 Page 127 Page 128 Page 129 Page 130 Page 130
ROUND-TOP DRAINS
32300 32330 32330-SD 34710 34720 34920
12-5/8" Top Medium-Duty 12-5/8" Top Medium-Duty 12-5/8" Top Special-Duty 14-7/8" Top 14-7/8" Top Parking Deck 21-1/8" Top Extra-Heavy-
Drain, SUPER-FLO® Grate Drain with Bucket Garage Drain Parking Deck Drain Drain with Bucket Duty, NON-CLOG Drain
Page 131 Page 132 Page 132 Page 133 Page 133 Page 134
101
Floor Drains_08.qxd 3/27/08 9:32 AM Page 102
Page 134 Page 135 Page 136 Page 136 Page 137 Page 137
Page 138 Page 138 Page 139 Page 139 Page 140 Page 140
Page 141 Page 141 Page 142 Page 142 Page 143 Page 143
SPECIALTY DRAINS
38850 38930 39240 39600 39720 39960
22" x 14" Roadway Drain, 21" x 14-1/2" Top Packing 12-1/2" Top Can Planter Drain 11" Top Composition Drain Area Drain, Hinged Grate
Dome Strainer House Drain, Integral Trap Wash Drain
Page 144 Page 144 Page 145 Page 145 Page 146 Page 146
102
Floor Drains_08.qxd 3/27/08 9:32 AM Page 103
FLOOR DRAINS
How To Choose A Floor Drain
Adequate and proper drainage of surface areas within and immediately adjacent to building structures is of prime importance. Careful consideration
must be given to these areas, particularly their size and shape, and the anticipated volume of drainage to be handled.
Drainage volume is governed by a number of factors, depending on the building type and its use. Some of the factors to be considered include water
discharge from equipment, run-off from vehicles, condensate waste and emergency drainage. The drainage volume of surfaces outside the building is
normally based on rainfall factors for the geographical region in which the project is located. Exterior drains may be sized and placed using rainfall
data provided in this guide. After these considerations have been studied and the piping layout has been developed, the proper types and sizes of
drains to service the requirements must be determined.
Floor and area drain selection involves several fundamental steps including determination of tops and outlet sizes to provide fast, efficient drainage.
Next, the type of drain best suited for the application must be selected. Considerations here include location, drain material, floor construction, weight
of traffic, presence of sediment and debris, backflow prevention and architectural aesthetics, which is particularly significant in finished areas. Finally,
the outlet connections must be selected, based on the piping system used, hub and spigot, no-hub, threaded and so forth. The following technical data
will help you in making your selection.
LOCATION
The location, for which a drain is required, plays an important role in the selection of the drain. Basements, boiler and equipment rooms, parking
and service areas, utility rooms, machine and processing areas, elevator pits, toilet and shower rooms, laundries, kitchens, cold storage areas and
many other locations must be equipped with floor drains.
FLOOR DRAINS
In order to comply with the American Disabilities Act (ADA), drains located in walking surfaces or along accessible routes must have grate openings no
greater than 1/2 in. (13 mm) in one direction. If the grate openings are elongated, then the openings must be oriented so that the long dimension is
perpendicular to the dominant direction of travel.
AESTHETICS
The floor drain is aesthetically pleasing when the proper top material and shape are specified to harmonize with the surrounding environment.
JOSAM features products that can be specified and installed with confidence and pride.
103
Floor Drains_08.qxd 3/27/08 9:32 AM Page 104
FLOOR DRAINS
How To Choose A Floor Drain (continued)
CONNECTIONS
The means by which the drain becomes an integral component of the drainage system must be carefully considered so that specifications will reflect
proper outlets compatible to both the piping material and layout. There are five basic outlet connections: inside caulk, hub (outside caulk), no-hub,
spigot and threaded. These connections are provided on the three common outlet types: bottom, side, and side with integral trap. There are a few
pointers relative to connections that should be kept in mind. Inside caulk connections (-X) can be made with any type of pipe using JOSAM JIFFEE-
JOINTS more quickly and economically than with conventional caulking materials and methods. Hub (outside caulk) connections
(-Y) can be made to soil pipe using the popular JIFFEE-SET compression gasket. Spigot connections can be joined with soil pipe hubs using
compression gaskets or to no-hub using the conventional couplings. Specific details on outlet connections and types are included with the
product listings in this section.
FLOOR CONSTRUCTION
Drain selection is influenced by floor construction. Elements such as slab type and thickness, surface finish, depth of fill, finished floor materials
and waterproofing requirements are primary considerations. Installation diagrams illustrating various types of drains are included in this section
to help you choose the right drain.
MATERIALS
After the duty type is determined, top materials must be considered. The basic material used in the manufacture of floor drain grates is cast iron,
conforming to ASTM Specification A48. Cast iron grates are suitable for most duty types in areas where aesthetics is not a factor. In such locations
where shock or impact loading will be encountered, ductile iron grates should be specified as this material not only possesses superior strength but
will yield rather than fracture under severe service conditions. For installations where appearance and service are important, tops of bronze or
FLOOR DRAINS
Nikaloy should be considered. These materials are usually accepted for exposed components of all plumbing drainage products in finished areas.
Most heavy-duty types are available with non-ferrous tops over iron grates for those finished areas where service loading is anticipated. Detailed
information on materials is presented in the Materials and Finishes section of this book and optional top materials are shown with specific series.
WEIGHT LOADS
Apart from their primary purpose of receiving and conveying liquids, floor
drains, as integral components of the floor, must be structurally suitable to with-
stand the anticipated loads that will be imposed on the floor. Weight support
requirements of the drain vary with the location, construction, and service con-
dition. The top loading classifications as published in Floor Drain Standard ANSI
A112.21.1M-1980 are as follows:
When the top loading requirements for a drain have been determined, the duty
type needed can be resolved. Selection is easily accomplished as all JOSAM
Floor Drains are classified according to duty type in this section. For specific
detail loading data, contact JOSAM Engineering.
104
Floor Drains_08.qxd 3/27/08 9:32 AM Page 105
FLOOR DRAINS
How To Choose A Floor Drain (continued)
TRAPPING OF SEDIMENT
In many locations, drainage will include sediments of various types which will eventually clog the drain lines if not trapped. Leaves, twigs,
paper scraps, sand, machine cuttings, hair and lint are some of the more common types. Floor drains with sediment buckets should be specified
in any location where the potential danger of drain stoppage due to sediment exists. Throughout this section, a comprehensive line of drains
featuring sediment buckets of every type will be found. Selection will depend upon the type of sediment to be trapped. One further point to
consider is that in shower and toilet rooms small valuables, such as rings, sometimes find their way to the drains. Sediment buckets or baskets
in drains in these locations will make it possible to retrieve these items.
FLOOR DRAINS
BACKFLOW PREVENTION
Protection against backflow from sewers is essential in basements and other areas located below the curb or property elevation where gravity
drainage to the main sewer is planned. Drains with backwater valves should also be considered in locations above the main sewer such as
second floor toilet rooms when an independent backwater valve cannot be installed in the line to prevent backflow from the floors above if a
blockage should occur in the main waste stack. JOSAM features backwater valves of various types as either standard or optional equipment in
many cataloged floor drains. Closely related to protection against backflow is protection against the infiltration of sewer gas. This is accom-
plished by traps either integral with or auxiliary to floor drains. Such drains with both backwater valves and deep seal traps provide total pro-
tection of health and property while performing their primary drainage function. Where floor drains with integral or auxiliary traps will be
subject to infrequent use, which could result in trap seal evaporation, they should be equipped with trap primer connections.
VERTICAL
SWING CHECK BALL FLOAT
CODE COMPLIANCE
Thorough familiarization with plumbing codes in the area where the installation is being planned is recommended. Many factors relating to
plumbing drainage products and their installations are governed by code. Our representatives will be happy to answer any questions regarding
code compliance of JOSAM products.
105
Floor Drains_08.qxd 3/27/08 9:32 AM Page 106
FLOOR DRAINS
Drain Selection Process
The proper selection of a drainage product is based on several factors. This engineer catalog is designed to allow the specifier to select the proper drainage
product with a logical progression of answers to the following questions. Below is a typical example of the selection process.
Typical Mechanical Rooms are small in size; round tops often pre- ASME Standard 112.6.3-2001 categorizes load designations from Safe
ferred to square to eliminate need for drain orientation to match Live Load (1/2 the weight load of grate failure)
room orientation. EXAMPLE:
-Select 32100 Medium-duty rating on 32100 is adequate for Mechanical Room.
-Select 32200 if outlet required is greater than 4" -Select 32100-TG if accessible to heavier traffic
106
Floor Drains_08.qxd 3/27/08 9:32 AM Page 107
FLOOR DRAINS
Typical Installations
JOSAM Floor Drains incorporate features developed and tested to meet the requirements of all types of modern floor and surface construction
related to our industry and the plumbing drainage systems involved. These features ensure the specifier, installer and user of completely trouble-
free installation and performance. The illustrations below show various types of floor drains installed in typical floor and exterior surface areas.
30000-A Series SUPER-FLO® Adjustable Strainer Floor Drain shown 30000-E1 Series Adjustable Strainer Floor Drain shown installed in a con-
installed in a concrete finish floor of two-pour construction. The versatile crete finish floor of two-pour construction. Extended rim protrudes 1 inch
JIFFEE-JOINT Gasket makes the caulk connection to the drainage line. above finish floor and serves as a receptacle for the emptying of liquids.
FLOOR DRAINS
32100-AE-81 Series SUPER-FLO® Floor Drain shown installed in a
30000-WF6S Series SUPER-FLO® Adjustable Strainer Floor Drain shown poured concrete floor with floor finish. LEVELEZE® Adjustable Collar
installed in a composition deck floor. Wide flange assures that bonding provides vertical adjustment, facilitating installation and forming a per-
of floor material is watertight and permanent. fect surface between top of drain and floor finish.
107
Floor Drains_08.qxd 3/27/08 9:32 AM Page 108
FLOOR DRAINS
Options
The optional features shown below illustrate a few of the options in the floor drain line. These options, as well as others, are offered to satisfy any
construction requirement where a floor drain is specified. Refer to specific series for available options. To order options, add suffix in ( ) to type number.
(-19) OPTION, CAST IRON UNDERGRATE (-49) OPTION, 3/4" PRIMER TAP (-66) OPTION
WITH SATIN NIKALOY TOP (-50) OPTION, 1/2" PRIMER TAP This option converts JOSAM bottom outlet
(-20) OPTION, CAST IRON UNDERGRATE Any time the system is designed with a trap inside caulk drains to no-hub side outlet
WITH SATIN BRONZE TOP to prevent escape of sewer gas or vermin drains using a 90˚ no-hub quarter bend and a
into the building, a trap seal primer connec- JIFFEE-JOINT Gasket.
On many series of heavy-duty and extra
heavy-duty drains, JOSAM offers these tion must be provided with the floor drain.
options. In most cases, it isn’t practical When the primer piping is properly installed PIPE
in conjunction with JOSAM’s 88250 Series SIZE A B
FLOOR DRAINS
(-80) OPTION, PERFORATED STAINLESS (-84) OPTION, STAINLESS STEEL MESH (-88) OPTION, SUPPLEMENTARY
STEEL BASKET BUCKET LINER STRAINER
For use with all adjustable strainers to collect In areas such as breweries, machine shops, or This option provides a secondary means of
debris which may clog the waste line. other facilities where small particles of glass, protection against blockage of drain lines.
metal or other minute pieces of material will be The openings in the supplementary strainer
encountered, a bucket liner should be used in are smaller than the openings in the top
conjunction with the sediment bucket. This grate, allowing it to intercept debris entering
option will assure free-flowing drain lines and the interior of the drain. This option is
will eliminate costly removal of blockage. primarily used in drains which don’t offer a
sediment bucket.
108
Floor Drains_08.qxd 3/27/08 9:32 AM Page 109
FLOOR DRAINS
-44 Option, Fixed Extension Collar
ORDERING INFORMATION
To specify or order a fixed extension collar with floor drain, add Option
(-44) and height required to type number of drain.
Example: Type 32103 with a 6" extension would be designated: Type
32103 (-44)-6".
SERIES NO. B D E
In. In. Min.
32100, 32150, 32160 9-1/8 8-1/8 2
32200, 32300 12-5/8 11-3/4 2
FLOOR DRAINS
(-J) Option Backwater Valve
A Series Round Strainer shown with E Series Round Tractor Strainer shown with S Series Square Strainer shown with
Optional (-J) Backwater Valve Optional (-J) Backwater Valve Optional (-J) Backwater Valve
For use in any Josam adjustable strainer in areas subject to back flow conditions with the exception of Series C and M. Cannot be used in conjunc-
tion with (-80) Option, Perforated Stainless Steel Basket.
Outlet Connections
JOSAM drains are furnished with outlets for connection to most types of pipe. The timesaving, economical JIFFEE-JOINT Gasket is used for inside caulk
connections (-X) to extra heavy or service weight soil pipe. No-hub spigot outlets (-Z) are also available for connection to no-hub soil pipe. The JIFFEE-SET
Outlet (-Y) is for connecting hub outlet drains to PVC and ABS, service weight or no-hub soil pipe. Threaded outlets (-T) can be obtained on many series.
OPTIONAL JOSAM CONVENTIONAL CAULK
JIFFEE-JOINT (BY OTHERS)
NO-HUB
CONNECTOR
(BY OTHERS)
OPTIONAL JOSAM
JIFFEE-SET GASKET
(-X) INSIDE CAULK CONNECTION (-Y) HUB CONNECTION (-T) THREADED CONNECTION (-Z) NO-HUB CONNECTION
109
Floor Drains_08.qxd 3/27/08 9:32 AM Page 110
Available Options
-SS Stainless Steel, 5A, 6A, 7A, 8A
-2 Satin Finish Bronze
-80 Perforated Stainless Steel Basket
-CP Chrome Plated, 5A, 6A
-J Backwater Valve
-VP Secured Grate, Vandal-Proof Screws
TYPE NO. A B C D FREE AREA LBS.
5A 5 1-15/16 1-1/8 4-5/8 7.8 2
6A 6 2-1/4 15/16 5-1/4 11.0 3
7A 7 2-11/16 1-1/2 6-7/16 13.2 4
8A 8 2-1/2 7/8 7-1/8 16.2 5
9A• 9 2-1/4 1 8-1/8 21.1 7
•Not SUPER-FLO® Design
10A• 10 2-1/4 1-1/8 9 28.0 9
Available Options
-2 Satin Bronze Top
FLOOR DRAINS
Available Options
-2 Satin Finish Bronze
-80 Perforated Stainless Steel Basket
-J Backwater Valve
-VP Secured Grate, Vandal-Proof Screws
110
Floor Drains_08.qxd 4/24/08 9:08 AM Page 111
Available Options
-2 Satin Finish Bronze Top
-VP Secured Grate, Vandal-Proof Screws
Available Options
FLOOR DRAINS
-2 Satin Finish Bronze
-80 Perforated Stainless Steel Basket
-J Backwater Valve
-VP Secured Dome, Vandal-Proof Screws
FREE
TYPE NO. A B C D E AREA LBS.
5D 5 1-7/8 1 1-7/8 4-3/4 8.1 2
6D 6 2-1/4 1 1-3/4 5-1/4 8.1 3
Available Options
-2 Satin Finish Bronze
-80 Perforated Stainless Steel Basket
-93 Cast Iron Strainer, 7E
-J Backwater Valve
-VP Secured Grate, Vandal-Proof Screws
111
Floor Drains_08.qxd 4/24/08 9:08 AM Page 112
Available Options
-2 Satin Finish Bronze
-80 Perforated Stainless Steel Basket
-J Backwater Valve
-VP Secured Grate, Vandal-Proof Screws
Available Options
FLOOR DRAINS
Available Options
-2 Satin Finish Bronze
-80 Perforated Stainless Steel Basket
-J Backwater Valve
-VP Secured Grate, Vandal-Proof Screws
112
Floor Drains_08.qxd 3/27/08 9:32 AM Page 113
Available Options
-2 Satin Finish Bronze
-63 Spanner Wrench
-80 Perforated Stainless Steel Basket
-J Backwater Valve
Available Options
FLOOR DRAINS
-2 Satin Finish Bronze
-92 Galvanized Cast Iron
-93 Cast Iron
4-1/2 x 2-5/8
Available Options F8 9 x 3-1/2
-2 Satin Finish Bronze
-92 Galvanized Cast Iron
-93 Cast Iron
3-3/4
113
Floor Drains_08.qxd 3/27/08 9:32 AM Page 114
Available Options
-2 Satin Finish Bronze
-J Backwater Valve
-VP Secured Grate, Vandal-Proof Screws
Available Options
FLOOR DRAINS
Available Options
-2 Satin Finish Bronze
-24 Less Dome
-PF Perforated Standpipe
114
Floor Drains_08.qxd 5/1/08 1:44 PM Page 115
Available Options
-2 Satin Finish Bronze
-80 Perforated Stainless Steel Basket
-VP Secured Grate, Vandal-Proof Screws
Available Options
FLOOR DRAINS
-2 Satin Finish Bronze
-80 Perforated Stainless Steel Basket
-J Backwater Valve
-VP Secured Grate, Vandal-Proof Screws
Available Options
-SS Stainless Steel, 5S, 6S, 8S
-2 Satin Finish Bronze
-80 Perforated Stainless Steel Basket
-CP Chrome Plated, 5S, 6S
-J Backwater Valve
-VP Secured Grate, Vandal-Proof Screws
115
Floor Drains_08.qxd 4/24/08 9:09 AM Page 116
Available Options
-2 Satin Finish Bronze
-80 Perforated Stainless Steel Basket for 6T and 9T
-J Backwater Valve
-SC Solid Cover, 6T
-VP Secured Grate, Vandal-Proof Screws
Available Options
-2 Satin Finish Bronze
-80 Perforated Stainless Steel Basket
-J Backwater Valve
-VP Secured Grate, Vandal-Proof Screws
116
Floor Drains_08.qxd 5/1/08 1:48 PM Page 117
SPECIFICATION
JOSAM 30000 Series coated cast iron Floor Drain, two-piece body with double
drainage flange and 1/2” primer tap with plug, bottom outlet, WEJLOC® invertible
non-puncturing flashing collar with weepholes, threaded to receive a JOSAM
adjustable strainer.
Available Options
▼ -PD Prison Drain -91 Rough Bronze Body
▼ -ST Shallow Trap -92 Galvanized Cast Iron Parts
▼ -TSO Threaded Side Outlet OUTLETS:
-ARE Acid-Resisting Epoxy -T Threaded Outlet
-49 3/4" Primer Tap -X Inside Caulk Outlet
1/2" Primer Tap (Std.) -Y Hub Outlet with Gasket
-Z No-Hub Outlet
CONFORMS WITH ASTM-C564.
FLOOR DRAINS
30004 4 13
SPECIFICATION
JOSAM 30000-PD Series galvanized steel security Floor Drain with flashing flange,
threaded side outlet, integral trap wall. Threaded to receive any JOSAM adjustable
strainer furnished with security screws.
Available Options
-50 1/2" Primer Tap
-92 Galvanized Cast Iron Parts
-C Bolted Flashing Clamp Device
OUTLET:
-T Threaded Outlet
SPECIFICATION
JOSAM 30000-TSO Series coated cast iron Floor Drain, two-piece body with double
drainage flange, integral threaded side outlet, WEJLOC® non-puncturing flashing
collar with weepholes, threaded to receive a JOSAM adjustable strainer.
Available Options
-ARE Acid-Resisting Epoxy
-49 3/4" Primer Tap
-50 1/2" Primer Tap
-92 Galvanized Cast Iron Parts
OUTLET:
-TSO Threaded Side Outlet
SPECIFICATION
JOSAM 30002-ST Series coated cast iron Floor Drain, two-piece body with double
drainage flange and 1/2” primer tap with plug, WEJLOC® invertible non-puncturing
flashing collar with weepholes threaded to receive a JOSAM adjustable strainer, bot-
tom outlet threaded connection to low profile P trap.
Available Options
-ARE Acid-Resisting Epoxy
-49 3/4" Primer Tap
1/2" Primer Tap, Std.
-92 Galvanized Cast Iron Parts
OUTLETS:
-T Threaded Outlet
-Z No-Hub Outlet
118
Floor Drains_08.qxd 3/27/08 9:32 AM Page 119
SPECIFICATION
JOSAM 30304-Z Series coated cast iron body threaded to receive JOSAM adjustable
strainers, no-hub bottom outlet.
FLOOR DRAINS
30304-Z 4 3
SPECIFICATION
JOSAM 30500 Series coated cast iron combined Floor Drain and integral deep drum
type “P” trap with double drainage flange, no-hub spigot side outlet, weepholes,
bronze integral flush-floor cleanout and threaded to receive a JOSAM adjustable
strainer.
Available Options
-C Bolted Flashing Clamp Device
-49 3/4" Primer Tap
-50 1/2" Primer Tap
-51 1-1/2" Threaded Auxiliary Inlet
-52 2" Threaded Auxiliary Inlet
-92 Galvanized Cast Iron Parts
OUTLET:
-Z No-Hub Outlet * IPS PRIMER TAPPING (-49) & (-50)
AUX. THREADED INLET (-51) & (-52)
119
Floor Drains_08.qxd 5/1/08 1:53 PM Page 120
120
Floor Drains_08.qxd 4/24/08 9:09 AM Page 121
FLOOR DRAINS
† STRAINER W/BODY † STRAINER W/BODY
121
Floor Drains_08.qxd 3/27/08 9:32 AM Page 122
122
Floor Drains_08.qxd 5/1/08 1:44 PM Page 123
Available Options
-SQ Square Top OUTLETS:
-LT Less Shallow Trap -T Threaded Outlet FOR OUTLET TYPE, SPECIFY -T or -Z
OUTLETS: -Z No-Hub Outlet STRAINER
-T Threaded Outlet TYPE PIPE FREE
ADJUSTMENT LBS.
NO. SIZE AREA
-Z No-Hub Outlet X Y
30802-4CP 2 1 2-1/8 3.8 8
SPECIFICATION
FLOOR DRAINS
JOSAM 30900-9AD Series coated cast iron Floor Drain with double drainage flange,
weepholes, bottom outlet and satin Nikaloy round strainer in an adjustable Nikaloy
clamping collar which secures flashing or waterproofing at finished floor.
CONFORMS WITH
ASTM-C564.
Available Options FOR OUTLET TYPE, SPECIFY -T, -X, -Y or -Z
-2 Satin Finish Bronze OUTLETS: STRAINER
-92 Galvanized Cast Iron Parts -66 No-Hub Side Outlet TYPE PIPE ADJUSTMENT FREE
LBS.†
-VP Secured Grate, Vandal-Proof -T Threaded Outlet NO. SIZE AREA
X Y
Screws -X Inside Caulk Outlet 30902-9AD 2 1-1/8 2-5/8 16.5 33
-Y Hub Outlet with Gasket
30903-9AD 3
-Z No-Hub Outlet †STRAINER WITH BODY
30904-9AD 4
Available Options
-C Bolted Flashing Clamp Device
-SQ Square Top
OUTLETS:
-Y Hub Outlet with Gasket, 2”, 3” FOR OUTLET TYPE, SPECIFY -Y or Z
-Z No-Hub Outlet, 3”, 4” STRAINER
TYPE PIPE TOP
ADJUSTMENT LBS.
NO. SIZE SIZE
MIN MAX
31002 2 5 3/4 2-1/8 9
31003 3 5 3/4 2-1/8 9
31004 4 5 3/4 2-1/8 9
123
Floor Drains_08.qxd 3/27/08 9:32 AM Page 124
SPECIFICATION
JOSAM 32100 Series coated cast iron Floor Drain, two-piece body with double
drainage flange, WEJLOC® non-puncturing flashing collar, weepholes, bottom outlet,
round top, medium-duty loose-set anti-tilting SUPER-FLO® grate with perimeter
drainage slots.
Available Options
▼ -AE LEVELEZE® Adjustable Extension -ARE Acid-Resisting Epoxy
▼ -81 Slotted Cast Iron Bucket -44 Fixed Extension Collar, Cast
▼ -TG Tractor Grate Iron (Specify Hgt.), 3" Std.
▼ -LC1 Locking Cover, Satin Finish -44-92 Fixed Extension Collar, Galv.
Nikaloy (Specify Hgt.), 3" Std.
-LC2 Locking Cover, Satin Finish -49 3/4" Primer Tap
Bronze -50 1/2" Primer Tap
-1 Satin Finish Nikaloy Top -84 Stainless Steel Mesh
-2 Satin Finish Bronze Top Bucket Liner
-7 Ductile Iron Grate -88 Supplementary Strainer
-11 Extra-Heavy Grate, Cast Iron -92 Galvanized Cast Iron Parts
-13 Dome Grate, Cast Iron OUTLETS: ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
-66 No-Hub Side Outlet CONFORMS WITH ASTM-C564.
-13-1 Dome Grate, Nikaloy
-13-2 Dome Grate, Bronze -T Threaded Outlet FOR OUTLET TYPE SPECIFY -T, -X, -Y or -Z
-15 Chained Grate -X Inside Caulk Outlet TYPE NO. PIPE SIZE LBS.
▼ -39 Solid Cast Iron Cover -Y Hub Outlet with Gasket 32102 2 18
-VP Secured Grate, -Z No-Hub Outlet 32103 3 21
FLOOR DRAINS
SPECIFICATION
JOSAM 32100-39 Series coated cast iron Floor Drain with double drainage flange,
weepholes, bottom outlet and 9" round solid scoriated cast iron cover.
OPTIONS N/A:
-81, -84
SPECIFICATION
JOSAM 32100-81 Series coated cast iron Floor Drain, two-piece body with double
drainage flange, WEJLOC® non-puncturing flashing collar, weepholes, bottom outlet,
round top, and removable sediment bucket which supports a medium-duty loose-set
anti-tilting SUPER-FLO® grate with perimeter drainage slots.
SPECIFICATION
JOSAM 32100-AE Series coated cast iron LEVELEZE® Floor Drain, two-piece body
FLOOR DRAINS
with double drainage flange, WEJLOC® non-puncturing flashing collar, weepholes,
bottom outlet, round top, adjustable collar with rolled thread and loose-set, anti-
tilting, medium-duty, SUPER-FLO® grate with perimeter drainage slots.
32100-AE-81 SERIES with -AE LEVELEZE® Extension & -81 Slotted Cast Iron Bucket
APPLICATION
For use in moderate traffic areas, such as commercial auto garages, for any type of
floor construction where a small to medium flow of liquid is anticipated and a bucket
is necessary to collect debris which may clog the waste line. LEVELEZE® adjustable
collar permits accurate positioning of grate to meet finished floor level.
SPECIFICATION
JOSAM 32100-AE-81 Series coated cast iron LEVELEZE® Floor Drain, two-piece body with
double drainage flange, WEJLOC® non-puncturing flashing collar, weepholes, bottom outlet,
round top, adjustable collar with rolled thread and removable sediment bucket which sup-
ports a medium-duty, loose-set, anti-tilting, SUPER-FLO® grate with perimeter drainage slots.
125
Floor Drains_08.qxd 5/1/08 1:45 PM Page 126
SPECIFICATION
JOSAM 32100-AE-LC1-88 Series coated cast iron LEVELEZE® Floor Drain, two-piece
body with double drainage flange, WEJLOC® non-puncturing flashing collar, weep-
holes, bottom outlet, round satin Nikaloy hinged key-locking cover, adjustable collar
and internal strainer.
32100-AE-TG SERIES with -AE LEVELEZE® Extension & -TG 9" Tractor Top
APPLICATION
For use in heavy traffic areas, such as warehouses, for any type of floor construction
where a small to medium flow of liquid is anticipated. LEVELEZE® adjustable collar
permits accurate positioning of grate to meet finished floor level.
SPECIFICATION
JOSAM 32100-AE-TG Series coated cast iron LEVELEZE® Floor Drain, two-piece body
FLOOR DRAINS
126
Floor Drains_08.qxd 4/24/08 9:09 AM Page 127
SPECIFICATION
JOSAM 32150 Series coated cast iron Floor Drains with double drainage flanges,
weepholes, bottom outlets, 9" round tops, one body furnished with a solid bronze
plug, the other body furnished with an extra heavy-duty, anti-tilting, SUPER-FLO®
grate with perimeter drainage slots.
Available Options
-1 Satin Finish Nikaloy Top OUTLETS:
-2 Satin Finish Bronze Top -T Threaded Outlet
-7 Ductile Iron Grate -X Inside Caulk Outlet
-44 Fixed Extension Collar, Cast -Y Hub Outlet with Gasket
Iron (Specify Hgt.), 3" Std. -Z No-Hub Outlet
-44-92 Fixed Extension Collar, Galv.
(Specify Hgt.), 3" Std.
-92 Galvanized Cast Iron Parts
-ARE Acid-Resisting Epoxy
CONFORMS WITH ASTM-C564.
▲ WEIGHT INCLUDES BOTH DRAINS.
FLOOR DRAINS
32154 4 43
SPECIFICATION
JOSAM 32160 Series coated cast iron Floor Drain with double drainage flange,
weepholes, bottom outlet, inside caulk connection, round top and heavy-duty,
loose-set, tractor grate.
Available Options
-7 Ductile Iron Grate -53-92 2" Auxiliary Hub Inlet, Galv.
-12 Square Top, Cast Iron -54-92 2" Auxiliary Spigot Inlet,
-15 Chained Grate Galvanized
-19 C. I. Undergrate with -60 Backwater Valve
Satin Finish Nikaloy Top ▲ -62 “T” Handle Bronze
-20 C. I. Undergrate with Closure Plug
Satin Finish Bronze Top ▲ -71 Solid Cast Iron Bucket
-44 Fixed Ext. Collar, CI, ▲ -81 Slotted Cast Iron Bucket
(Specify Hgt.), 3" Std. ▲ -88 Supplementary Strainer
-49 3/4" Primer Tap -92 Galvanized Cast Iron Parts
-50 1/2" Primer Tap -ARE Acid-Resisting Epoxy
-51 1-1/2" Auxiliary -VP Secured Grate,
Threaded Inlet Vandal-Proof Screws ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
-52 2" Auxiliary Threaded Inlet OUTLETS: FOR OUTLET TYPE SPECIFY -X
-53 2" Auxiliary Hub Inlet -66 No-Hub Side Outlet TYPE NO. PIPE SIZE F LBS.
-54 2" Auxiliary Spigot Inlet -X Inside Caulk Outlet 32163 3 10-7/8 48
▲ Cannot be installed when Backwater Valve is ordered. 32164 4 11-1/4 48
127
Floor Drains_08.qxd 4/24/08 9:09 AM Page 128
SPECIFICATION
JOSAM 32200 Series coated cast iron Floor Drain, shallow two-piece body with double
drainage flange, WEJLOC® non-puncturing flashing clamp collar, weepholes, bottom
outlet, round top, and medium-duty loose-set anti-tilting SUPER-FLO® grate with
perimeter drainage slots.
Available Options
▼ -AE LEVELEZE® Adjustable Ext. -44-92 Fixed Extension Collar, Galv.
▼ -81 Slotted Cast Iron Bucket (Specify Hgt.), 2" Std.
▼ -SD Special-Duty Grate -49 3/4" Primer Tap
-1 Satin Finish Nikaloy Top -50 1/2" Primer Tap
-2 Satin Finish Bronze Top -84 Stainless Steel Mesh Bucket
Liner
-4 Secondary Flashing Clamp
(use with -AE only) -88 Supplementary Strainer
-7 Ductile Iron Grate -92 Galvanized Cast Iron Parts
-13 Dome Grate, Cast Iron OUTLETS:
-13-1 Dome Grate, Nikaloy -66 No-Hub Side Outlet, 2"- 6"
-13-2 Dome Grate, Bronze -T Threaded Outlet CONFORMS WITH ASTM-C564.
-15 Chained Grate -X Inside Caulk Outlet THIS DIM. IS 5-3/4" FOR 32208-T.
-Y Hub Outlet with Gasket, ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
-ARE Acid-Resisting Epoxy
-VP Secured Grate, 2"- 4"
FOR OUTLET TYPE SPECIFY -T, -X, -Y or -Z
Vandal-Proof Screws -Z No-Hub Outlet
TYPE NO. PIPE SIZE LBS. TYPE NO. PIPE SIZE LBS.
-44 Fixed Extension Collar, C.I. 32202 2 48 32205 5 50
(Specify Hgt.), 2" Std. 32203 3 48 32206 6 49
FLOOR DRAINS
32204 4 48 32208 8 46
SPECIFICATION
JOSAM 32200-81 Series coated cast iron Floor Drain, shallow two-piece body with
double drainage flange, WEJLOC® non-puncturing flashing clamp collar, weepholes,
bottom outlet, round top and removable sediment bucket which supports a medium-
duty loose-set anti-tilting SUPER-FLO® grate with perimeter drainage slots.
OPTION N/A:
-4
SPECIFICATION
JOSAM 32200-AE Series coated cast iron LEVELEZE® Floor Drain with round top, grate
support collar with double drainage flange and weepholes, bottom outlet, adjustable
collar, bolted support ring, large sump body, and medium-duty, loose-set, anti-tilting,
SUPER-FLO® grate with perimeter drainage slots.
OPTION N/A:
-84
FLOOR DRAINS
32204-AE 4 74 32208-AE 8 72
32200-AE-81 SERIES with -AE LEVELEZE® Ext. & -81 Slotted Cast Iron Bucket
APPLICATION 32200-AE-81 SLOT WIDTH 9/16"
For use in medium traffic areas for any type of floor construction where a medium to 32200-AE-81-1 SLOT WIDTH 7/16"
large flow of liquid is anticipated and a bucket is necessary to collect debris which 32200-AE-81-2 SLOT WIDTH 7/16"
may clog the waste line, such as a car or truck wash. LEVELEZE® adjustable collar
permits accurate positioning of grate to meet finished floor level.
SPECIFICATION
JOSAM 32200-AE-81 Series coated cast iron LEVELEZE® Floor Drain with round top,
grate support collar with double drainage flange and weepholes, bottom outlet,
adjustable collar, bolted support ring, large sump body, and removable sediment
bucket which supports a medium-duty, loose-set, anti-tilting, SUPER-FLO® grate with
perimeter drainage slots.
129
Floor Drains_08.qxd 3/27/08 9:32 AM Page 130
SPECIFICATION
JOSAM 32200-AE-SD Series coated cast iron LEVELEZE® Floor Drain with round top,
grate support collar with double drainage flange and weepholes, adjustable collar,
bolted support ring, large sump body, bottom outlet and loose-set, special-duty grate.
OPTIONS N/A:
-7, -13, -13-1, -13-2
32204-AE-SD 4 87 32208-AE-SD 8 85
SPECIFICATION
JOSAM 32200-SD Series coated cast iron Floor Drain, shallow two-piece body with
double drainage flange, WEJLOC® non-puncturing flashing clamp collar, weepholes,
bottom outlet, round top and special-duty, loose-set grate.
OPTIONS N/A:
-4, -7, -13, -13-1, -13-2
130
Floor Drains_08.qxd 3/27/08 9:32 AM Page 131
SPECIFICATION
JOSAM 32300 Series coated cast iron Floor Drain, medium-deep two-piece body with
double drainage flange, WEJLOC® non-puncturing flashing clamp collar, weepholes,
bottom outlet, round top and medium-duty loose-set anti-tilting SUPER-FLO® grate
with perimeter drainage slots.
Available Options
▼ -81 SlottedCast
Slotted CastIron
IronBucket
Bucket FixedExtension
-44-92 Fixed ExtensionCollar,
Collar,Galv.
Galv.
-SD Special DutyGrate
Special-Duty Grate (SpecifyHgt.),
(Specify Hgt.) 2"
2" Std.
Std.
-1 SatinFinish
Satin FinishNikaloy
NikaloyTop Top -49 3/4"Primer
3/4" PrimerTapTap
-2 SatinFinish
Satin FinishBronze
BronzeTop Top -50 1/2"Primer
1/2" PrimerTapTap
-7 DuctileIron
Ductile IronGrate
Grate -84 StainlessSteel
Stainless SteelMesh
Mesh
BucketLiner
Bucket Liner
-13 DomeGrate,
Dome Grate,Cast
CastIron
Iron
-88 SupplementaryStrainer
Supplementary Strainer
-13-1 DomeGrate,
Dome Grate,Nikaloy
Nikaloy
-92 GalvanizedCast
Galvanized CastIron
IronParts
Parts
-13-2 DomeGrate,
Dome Grate,Bronze
Bronze
ChainedGrate
Grate OUTLETS:
OUTLETS:
-15 Chained
Acid-ResistingEpoxy
Epoxy -66 No-HubSide
No-Hub SideOutlet,
Outlet,2"-
2"-6"6"
-ARE Acid-Resisting
SecuredGrate,
Grate, -X InsideCaulk
Inside CaulkOutlet
Outlet
-VP Secured
Vandal-ProofScrews
Vandal-Proof Screws -Z No-HubOutlet
No-Hub Outlet ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
-44 FixedExtension
Fixed ExtensionCollar,
Collar,Cast
Cast FOR OUTLET TYPE SPECIFY -X or -Z
Iron(Specify
Iron (SpecifyHgt.),
Hgt.) 2"
2" Std.
Std.
TYPE NO. PIPE SIZE FREE AREA LBS. TYPE NO. PIPE SIZE FREE AREA LBS.
32302 2 59 58 32305 5 59 61
32303 3 59 59 32306 6 59 62
FLOOR DRAINS
32304 4 59 60 32308 8 59 64
SPECIFICATION
JOSAM 32300-81 Series coated cast iron Floor Drain, medium-deep two-piece body
with double drainage flange, WEJLOC® non-puncturing flashing clamp collar, weep-
holes, bottom outlet, round top and removable sediment bucket which supports a
medium-duty loose-set anti-tilting SUPER-FLO® grate with perimeter drainage slots.
SPECIFICATION
JOSAM 32330 Series coated cast iron Floor Drain, deep two-piece body with double
drainage flange, WEJLOC® non-puncturing flashing clamp collar, weepholes, bottom
outlet, round top and removable sediment bucket which supports a medium-duty
loose-set anti-tilting SUPER-FLO® grate with perimeter slots.
Available Options
▼ -SD Special-Duty Grate -49 3/4" Primer Tap
-15 Chained Grate -50 1/2" Primer Tap
-VP Secured Grate, Vandal- -70 Less Bucket
Proof Screws (32330-SD Only)
-19 C.I. Undergrate with -84 Stainless Steel Mesh
Satin Finish Nikaloy Top Bucket Liner
-20 C.I. Undergrate with -88 Supplementary Strainer
Satin Finish Bronze Top -92 Galv. Cast Iron Parts
-44 Fixed Extension Collar, OUTLETS:
C.I. (Specify Hgt.) on -66 No-Hub Side Outlet,
32330-SD Only, 1” Std. 2"-6"
-44-92 Fixed Extension Collar, -X Inside Caulk Outlet ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
Galv. (Specify Hgt.) on
32330-SD Only, 1” Std. -Z No-Hub Outlet
FOR OUTLET TYPE SPECIFY -X or -Z
TYPE NO. PIPE SIZE LBS. TYPE NO. PIPE SIZE LBS.
32332 2 86 32335 5 89
32333 3 87 32336 6 90
FLOOR DRAINS
32334 4 88 32338 8 92
SPECIFICATION
JOSAM 32330-SD Series coated cast iron Floor Drain with double drainage flange,
WEJLOC® non-puncturing flashing clamp collar, weepholes, bottom outlet, round top,
removable sediment bucket and special-duty, loose-set grate.
SPECIFICATION
JOSAM 34710 Series coated cast iron Floor Drain with two-piece body, WEJLOC®
non-puncturing flashing clamp collar, double drainage flange, weepholes, bottom
outlet, round top, extra heavy-duty, loose-set grate.
Available Options
-AE LEVELEZE® Adjustable Extension -50 1/2" Primer Tap
-7 Ductile Iron Grate -88 Supplementary Strainer
-15 Chained Grate -92 Galvanized Cast Iron Parts
-VP Secured Grate, Vandal-Proof -ARE Acid-Resisting Epoxy
Screws OUTLETS:
-19 C.I. Undergrate with -T Threaded Outlet
Satin Finish Nikaloy Top -X Inside Caulk Outlet
-20 C.I. Undergrate with -Y Hub Outlet with Gasket, 4"
Satin Finish Bronze Top
-Z No-Hub Outlet
-49 3/4" Primer Tap
FLOOR DRAINS
34718 8 76
SPECIFICATION
JOSAM 34720 Series coated cast iron Floor Drain with two-piece body, double
drainage flange, WEJLOC® non-puncturing flashing clamp collar, weepholes, bottom
outlet, round top, removable sediment bucket, loose-set extra heavy-duty grate.
Available Options
-7 Ductile Iron Grate -50 1/2" Primer Tap
-15 Chained Grate -84 Stainless Steel Mesh
-VP Secured Grate, Bucket Liner
Vandal-Proof Screws -88 Supplementary Strainer
-19 C.I. Undergrate with -92 Galvanized Cast Iron Parts
Satin Finish Nikaloy Top OUTLETS:
-20 C.I. Undergrate with -66 No-Hub Side Outlet
Satin Finish Bronze Top
-X Inside Caulk Outlet
-49 3/4" Primer Tap
-Z No-Hub Outlet
133
Floor Drains_08.qxd 5/1/08 1:45 PM Page 134
SPECIFICATION
JOSAM 34920 Series coated cast iron Floor Drain with double drainage flange, weep-
holes, bottom outlet, round top and removable sediment bucket designed so that
extra heavy-duty NON-CLOG grate cannot be replaced unless bucket is in position.
Available Options
-12 Square Top -49 3/4" Primer Tap
-12-1 Square Top, Nikaloy -50 1/2" Primer Tap
-12-2 Square Top, Bronze -80 Perforated Stainless
-15 Chained Grate Steel Basket
-VP Secured Grate, -84 Stainless Steel Mesh
Vandal-Proof Screws Bucket Liner
-19 C.I. Undergrate with -92 Galvanized Cast Iron Parts
Satin Finish Nikaloy Top OUTLETS:
-20 C.I. Undergrate with -66 No-Hub Side Outlet, 3"- 6" ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
Satin Finish Bronze Top -T Threaded Outlet
-C Bolted Flashing FOR OUTLET TYPE SPECIFY -T or -X
-X Inside Caulk Outlet
Clamp Device TYPE NO. PIPE SIZE E F LBS.
34923 3 14-3/4 16-7/8 253
34924 4 14-3/4 16-3/4 253
34925 5 15 16-7/8 253
34926 6 15 17-3/4 253
FLOOR DRAINS
SPECIFICATION
JOSAM 35100 Series coated cast iron Floor Drain, two-piece body with double
drainage flange and 1/2” primer tap with plug, WEJLOC® non-puncturing flashing col-
lar, weepholes, bottom outlet, square top and heavy-duty, loose-set grate.
Available Options
-1 Satin Finish Nikaloy Top OUTLETS:
-2 Satin Finish Bronze Top -TSO Threaded Side Outlet
-7 Ductile Iron Grate -T Threaded Outlet
-15 Chained Grate -X Inside Caulk Outlet
-49 3/4" Primer Tap -Y Hub Outlet with Gasket
1/2" Primer Tap, Std. -Z No-Hub Outlet
-92 Galvanized Cast Iron Parts
-ARE Acid-Resisting Epoxy
134
Floor Drains_08.qxd 4/24/08 9:09 AM Page 135
SPECIFICATION
JOSAM 35130 Series coated cast iron Floor Drain with two-piece body, flashing
flange, seepage slots, bottom outlet, medium-duty secured grate and removable sedi-
ment bucket. Top frame serves as clamp ring.
Available Options
-1 Satin Finish Nikaloy Top -70 Less Bucket
-2 Satin Finish Bronze Top -84 Stainless Steel
▼ -14-1 Hinged Top, Mesh Bucket Liner
Satin Finish Nikaloy -92 Galvanized Cast Iron Parts
-14-2 Hinged Top, -ARE Acid-Resisting Epoxy
Satin Finish Bronze OUTLETS:
-15 Chained Grate -66 No-Hub Side Outlet
-VP Secured Grate, -X Inside Caulk Outlet
Vandal-Proof Screws -Z No-Hub Outlet
-49 3/4" Primer Tap
-50 1/2" Primer Tap
ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
FLOOR DRAINS
35134 4 47
SPECIFICATION
JOSAM 35130-14-1 Series coated cast iron Floor Drain with two-piece body, flashing
flange, seepage slots, bottom outlet, Nikaloy square top, medium-duty hinged grate
and removable sediment bucket. Top frame serves as clamp ring.
Series 35130-14-2 with Satin Finish Bronze Hinged Top
OPTION N/A:
-15
SPECIFICATION
JOSAM 35170 Series coated cast iron Floor Drain, bottom outlet, square top, medium-
duty, loose-set tractor grate and removable bucket.
Available Options
-1 Satin Finish Nikaloy Top OUTLETS:
-2 Satin Finish Bronze Top -X Inside Caulk Outlet
-15 Chained Grate -Z No-Hub Outlet
-VP Secured Grate,
Vandal-Proof Screws
-49 3/4" Primer Tap
-50 1/2" Primer Tap
-70 Less Bucket
-84 Stainless Steel Mesh
Bucket Liner
-88 Supplementary Strainer
-92 Galvanized Cast Iron Parts
ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
35174 4 44
SPECIFICATION
JOSAM 37800 Series coated cast iron Floor Drain with flashing flange, and 1/2”
primer tap with plug, shallow body, WEJLOC® non-puncturing flashing collar, weep-
holes, bottom outlet, square top and heavy-duty, loose-set grate.
Available Options
-7 Ductile Iron Grate OUTLETS:
-14 Hinged Grate -66 No-Hub Side Outlet
-VP Secured Grate, -T Threaded Outlet
Vandal-Proof Screws -X Inside Caulk Outlet
-18 Hinged Grate with -Y Hub Outlet with Gasket
Latching Device
-Z No-Hub Outlet
-19 C.I. Undergrate with
Satin Finish Nikaloy Top
-20 C.I. Undergrate with
Satin Finish Bronze Top
-49 3/4" Primer Tap
1/2" Primer Tap, Std.
CONFORMS WITH ASTM-C564.
-92 Galvanized Cast Iron Parts ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
136
Floor Drains_08.qxd 3/27/08 9:32 AM Page 137
SPECIFICATION
JOSAM 37810 Series coated cast iron Floor Drain, two-piece medium-deep body with
double drainage flange, WEJLOC® non-puncturing flashing collar, weepholes, bottom
outlet, square top, heavy-duty, loose-set grate and removable sediment bucket.
Available Options
-AE LEVELEZE® Adjustable Ext. -70 Less Bucket
-4 Secondary Flashing Clamp -84 Stainless Steel Mesh
(Use with -AE only) Bucket Liner
-7 Ductile Iron Grate -88 Supplementary Strainer
-14 Hinged Grate -92 Galvanized Cast Iron Parts
-VP Secured Grate, -ARE Acid-Resisting Epoxy
Vandal-Proof Screws OUTLETS:
-18 Hinged Grate with -66 No-Hub Side Outlet
Latching Device -T Threaded Outlet
-19 C.I. Undergrate with -X Inside Caulk Outlet
Satin Finish Nikaloy Top
-Y Hub Outlet with Gasket, CONFORMS WITH ASTM-C564.
-20 C.I. Undergrate with 2"-4" ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
Satin Finish Bronze Top
-Z No-Hub Outlet
-49 3/4" Primer Tap FOR OUTLET TYPE SPECIFY -T, -X, -Y or -Z
-50 1/2" Primer Tap TYPE NO. PIPE SIZE LBS. TYPE NO. PIPE SIZE LBS.
37812 2 56 37815 5 56
37813 3 56 37816 6 56
FLOOR DRAINS
37814 4 56
SPECIFICATION
JOSAM 37820 Series coated cast iron Floor Drain, two-piece deep body with double
drainage flange, WEJLOC® non-puncturing flashing collar, weepholes, bottom outlet,
square top, heavy-duty, loose-set grate and removable sediment bucket.
Available Options
-AE LEVELEZE® Adjustable Ext. -49 3/4" Primer Tap
-4 Secondary Flashing Clamp -50 1/2" Primer Tap
(Use with -AE only) -70 Less Bucket
-7 Ductile Iron Grate -84 Stainless Steel Mesh
-14 Hinged Grate Bucket Liner
-VP Secured Grate, -88 Supplementary Strainer
Vandal-Proof Screws -92 Galvanized Cast Iron Parts
-18 Hinged Grate with -ARE Acid-Resisting Epoxy
Latching Device
OUTLETS:
-19 C.I. Undergrate with
-66 No-Hub Side Outlet, 2"-6"
Satin Finish Nikaloy Top
-X Inside Caulk Outlet GRATE FREE AREA 54 SQ. IN.
-20 C.I. Undergrate with
Satin Finish Bronze Top -Z No-Hub Outlet ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
137
Floor Drains_08.qxd 4/24/08 9:09 AM Page 138
SPECIFICATION
JOSAM 37830 Series coated cast iron Floor Drain with double drainage flange, seep-
age slots, bottom outlet, square top, heavy-duty, hinged latching grate and removable
sediment bucket.
Available Options
-7 Ductile Iron Grate OUTLETS:
-19 Satin Finish Nikaloy Top -66 No-Hub Side Outlet
-20 Satin Finish Bronze Top -X Inside Caulk Outlet
-21 Loose-Set Grate -Z No-Hub Outlet
-22 Less Latching Device
-49 3/4" Primer Tap
-50 1/2" Primer Tap
-69 Lift Handle for Sediment Bucket GRATE FREE AREA 54 SQ. IN.
-84 Stainless Steel Mesh ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
Bucket Liner
FOR OUTLET TYPE SPECIFY -X or -Z
-92 Galvanized Cast Iron Parts
TYPE NO. PIPE SIZE LBS.
37832 2 73
37833 3 74
37834 4 74
37835 5 74
FLOOR DRAINS
37836 6 74
SPECIFICATION
JOSAM 37840 Series coated cast iron Floor Drain with double drainage flange, seep-
age slots, bottom outlet, square top, heavy-duty secured grate and removable sedi-
ment bucket. Top frame serves as clamp ring.
Available Options
-7 Ductile Iron Grate OUTLETS:
-14 Hinged Grate -66 No-Hub Side Outlet, 2"-6"
-VP Secured Grate, -X Inside Caulk Outlet
Vandal-Proof Screws -Z No-Hub Outlet
-19 C.I. Undergrate with
Satin Finish Nikaloy Top
-20 C.I. Undergrate with
Satin Finish Bronze Top
GRATE FREE AREA 54 SQ. IN.
-49 3/4" Primer Tap ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
-50 1/2" Primer Tap
-70 Less Bucket FOR OUTLET TYPE SPECIFY -X or -Z
-84 Stainless Steel Mesh TYPE NO. PIPE SIZE LBS.
Bucket Liner 37842 2 75
-88 Supplementary Strainer 37843 3 75
-92 Galvanized Cast Iron Parts 37844 4 75
37845 5 75
37846 6 75
37848 8 75
138
Floor Drains_08.qxd 4/24/08 9:09 AM Page 139
SPECIFICATION
JOSAM 37900 Series coated cast iron LEVELEZE® Floor Drain with square grate set in
square secured frame, grate support collar with double drainage flange and weep-
holes, bottom outlet, adjustable collar, support ring, large sump body, removable sedi-
ment bucket and heavy-duty ductile iron grate.
Available Options
-4 Secondary Flashing Clamp OUTLETS:
-15 Chained Grate -T Threaded Outlet
-VP Secured Grate, -X Inside Caulk Outlet
Vandal-Proof Screws -Y Hub Outlet, 2"-4"
-19 Heavy-Duty Ductile Iron -Z No-Hub Outlet
Undergrate w/Satin Finish CONFORMS WITH ASTM-C564.
Nikaloy Top ■ THIS DIM. IS 5-3/4" ON 37908-T.
▲ WITH -4 SECONDARY FLASHING CLAMP 2-1/4” MIN. 4-1/4” MAX.
-20 Heavy-Duty Ductile Iron ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
Undergrate w/Satin Finish
Bronze Top FOR OUTLET TYPE SPECIFY -T, -X, -Y or -Z
-70 Less Bucket TYPE NO. PIPE SIZE LBS.
-84 Stainless Steel Mesh 37902 2 82
Bucket Liner 37903 3 82
-88 Supplementary Strainer 37904 4 81
-92 Galvanized Cast Iron Parts 37905 5 81
37906 6 80
FLOOR DRAINS
37908 8 80
SPECIFICATION
JOSAM 37960 Series coated cast iron Floor Drain with double drainage flange,
weepholes, bottom outlet, inside caulk connection, square top, square medium-duty,
loose-set, SUPER-FLO® grate and secondary strainer.
Available Options
-1 Satin Finish Nikaloy Top -92 Galvanized Cast Iron Parts
-2 Satin Finish Bronze Top -92-LF Galvanized Cast Iron Parts,
-7 Ductile Iron Grate Less Double Drainage
Flange
-LG Less Grate, Cast Iron
-92-LG-LF Galvanized Cast Iron Parts,
-LG-1 Less Grate, Nikaloy
Less Grate and Flange
-LG-2 Less Grate, Bronze
-ARE Acid-Resisting Epoxy
-11 Extra Heavy-Duty Grate (See 49400 Series)
-15 Chained Grate OUTLET:
-LF Less Double Drainage -X Inside Caulk Outlet
▲ 2" SIZE FURNISHED W/CAULK RING.
Flange ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
139
Floor Drains_08.qxd 3/27/08 9:32 AM Page 140
SPECIFICATION
JOSAM 38040 Series coated cast iron combination Floor Drain and integral deep seal
trap, side outlet spigot connection, round top, medium-duty, loose-set, SUPER-FLO®
grate and cleanout protected by a tractor cover.
Available Options
-1 Satin Finish Nikaloy Top -84 Stainless Steel Mesh
-2 Satin Finish Bronze Top Bucket Liner
-7 Ductile Iron Grate -88 Supplementary Strainer
-11 Extra-Heavy Grate, Cast Iron -92 Galvanized Cast Iron Parts
-15 Chained Grate OUTLET:
-VP Secured Grate, -Z No-Hub Outlet
Vandal-Proof Screws
-49 3/4" Primer Tap
-50 1/2" Primer Tap ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
-51 1-1/2" Auxiliary ▲ NOTE: THE 38043 USES A 38044 BODY WITH A 4 X 3 REDUCING COUPLING.
Threaded Inlet
-52 2" Auxiliary Threaded Inlet FOR OUTLET TYPE SPECIFY -Z
-60 Backwater Valve TYPE PIPE BxB 1
C E F G H J LBS.
NO. SIZE
-81 Slotted Cast Iron Bucket
38042 2 14-1/8 x 9 21-1/8 5-3/4 13-1/2 16-5/8 4 4-1/2 63
-81-92 Slotted Cast Iron Bucket,
38043 3▲ 16-1/4 x 9 23-7/8 6-3/4 17 19-3/8 5 4 67
FLOOR DRAINS
Galvanized
38044 4 16-1/4 x 9 23-7/8 6-3/4 17 19-3/8 5 4 70
SPECIFICATION
JOSAM 38250A Series coated cast iron combination Floor Drain and integral deep
seal trap, side outlet spigot connection, round top, medium-duty, loose-set grate,
flush-with-floor cleanout and ball type backwater valve.
Available Options
-1 Satin Finish Nikaloy Top OUTLET:
-2 Satin Finish Bronze Top -Z No-Hub Outlet
-15 Chained Grate
-VP Secured Grate,
Vandal-Proof Screws
-61 Less Backwater Valve
-92 Galvanized Cast Iron Parts
ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP, TYPES 38252A & 38253A.
ADD 1/2" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP, TYPE 38254A.
140
Floor Drains_08.qxd 4/24/08 9:09 AM Page 141
SPECIFICATION
JOSAM 38420 Series coated cast iron combination Floor Drain and integral deep seal
trap with double drainage flange, weepholes, side outlet hub connection, round top,
flush-with-floor cleanout and removable sediment bucket with integral auxiliary
drainage rim designed so that medium-duty loose-set, NON-CLOG grate cannot be
replaced unless bucket is in position.
Available Options
▼ -IGS Internal Gas Seal, 4" Size Only
-1 Satin Finish Nikaloy Top
-2 Satin Finish Bronze Top
-15 Chained Grate
-VP Secured Grate, Vandal-Proof Screws
-C Bolted Flashing Clamp Device
-60 Backwater Valve
-84 Stainless Steel Mesh Bucket Liner
-92 Galvanized Cast Iron Parts
ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
FLOOR DRAINS
38424 4 270
SPECIFICATION
JOSAM 38420-IGS Series coated cast iron combination extra deep Floor Drain and
integral deep seal trap with double drainage flange, weepholes, side outlet and hub
vent connection, round top, flush-with-floor cleanout, removable sediment bucket,
funnel shaped internal seal with integral rim designed so that heavy-duty grate
cannot be replaced unless funnel is in position.
SPECIFICATION
JOSAM 38620-40 Series coated cast iron combination Floor Drain and deep seal trap,
side outlet threaded connection, 12-7/8" x 10-7/8" top, flush-with-floor cleanout,
removable medium-deep sediment bucket, and heavy-duty hinged grate.
Available Options
-1 Satin Finish Nikaloy Top
-2 Satin Finish Bronze Top
-7 Ductile Iron Grate
-VP Secured Grate, Vandal-Proof Screws
-33 Galvanized Bucket Only
-49 3/4" Primer Tap
-50 1/2" Primer Tap
-60 Backwater Valve
-70 Less Bucket
-84 Stainless Steel Mesh Bucket Liner
-92 Galvanized Cast Iron Parts
38640 SERIES 13" X 11" TOP WITH BUCKET & SIDE OUTLET
APPLICATION SLOT WIDTH 9/16"
For use in extra heavy traffic areas, such as garages and loading docks. The hinged
rectangular grate permits easy access for fast and frequent removal of sediment
bucket and ensures that the grate cannot be removed from the drain site.
SPECIFICATION
JOSAM 38640 Series coated cast iron Floor Drain with side outlet hub connection, 12-
7/8" x 10-7/8" top, removable sediment bucket and extra heavy-duty hinged grate.
Available Options
-1 Satin Finish Nikaloy Top
-2 Satin Finish Bronze Top
-7 Ductile Iron Grate
-VP Secured Grate, Vandal-Proof Screws
-70 Less Bucket
-84 Stainless Steel Mesh Bucket Liner
-92 Galvanized Cast Iron Parts
142
Floor Drains_08.qxd 3/27/08 9:32 AM Page 143
SPECIFICATION
JOSAM 38820 Series coated cast iron Floor Drain with flashing flange, bottom outlet,
15" x 13-1/8" top, removable deep sediment bucket and medium-duty loose-set tractor
grate. Top frame serves as clamp ring.
Available Options
-1 Satin Finish Nikaloy Top OUTLETS:
-2 Satin Finish Bronze Top -66 No-Hub Side Outlet
-7 Ductile Iron Grate -X Inside Caulk Outlet
-15 Chained Grate -Z No-Hub Spigot Outlet
-49 3/4" Primer Tap
-50 1/2" Primer Tap
-74 Aluminum Bucket
-84 Stainless Steel Mesh
Bucket Liner
-92 Galvanized Cast Iron Parts
FLOOR DRAINS
38824 4 10-1/2 12-3/8 117
SPECIFICATION
JOSAM 38830 Series coated cast iron combination Floor Drain and integral deep
seal trap with double drainage flange, weepholes, side outlet hub connection,
13-3/4" x 14-1/8" top, heavy-duty hinged grate, removable deep sediment bucket
and internal bronze cleanout.
Available Options
-1 Satin Finish Nikaloy Top
-2 Satin Finish Bronze Top
-7 Ductile Iron Grate
-VP Secured Grate, Vandal-Proof Screws
-49 3/4" Primer Tap
-50 1/2" Primer Tap
-84 Stainless Steel Mesh Bucket Liner
-92 Galvanized Cast Iron Parts
143
Floor Drains_08.qxd 3/27/08 9:32 AM Page 144
SPECIFICATION
JOSAM 38850 Series coated cast iron Floor Drain, bottom outlet, inside caulk connection,
22" x 14" top, heavy-duty, loose-set grate and removable internal dome strainer.
Available Options
-7 Ductile Iron Grate
-15 Chained Grate
-VP Secured Grate, Vandal-Proof Screws
-92 Galvanized Cast Iron Parts
OUTLET:
-X Inside Caulk Outlet
38856 6 247
SPECIFICATION
JOSAM 38930 Series coated cast iron combination Floor Drain and integral trap
with double drainage flange, weepholes, bottom outlet, inside caulk connection,
21" x 14-1/2" top, heavy-duty, loose-set grate, removable sediment bucket, and
flush-with-floor cleanout.
Available Options
-7 Ductile Iron Grate
-15 Chained Grate
-VP Secured Grate, Vandal-Proof Screws
-C Bolted Flashing Clamp Device
-84 Stainless Steel Mesh Bucket Liner
-92 Galvanized Cast Iron Parts
OUTLET:
-X Inside Caulk Outlet
144
Floor Drains_08.qxd 5/1/08 1:45 PM Page 145
SPECIFICATION
JOSAM 39240 Series coated cast iron Can Wash Drain with double drainage flange,
weepholes, bottom outlet, square top, removable sediment bucket and bronze spray
nozzle assembly.
Available Options
-1 Satin Finish Nikaloy Top
-2 Satin Finish Bronze Top
-15 Chained Grate
-C Bolted Flashing Clamp Device
-84 Stainless Steel Mesh Bucket Liner
-92 Galvanized Cast Iron Parts
-98 Water Supply Control Box
OUTLETS:
-66 No-Hub Side Outlet
-X Inside Caulk Outlet
GRATE FREE AREA 35 SQ. IN.
-Z No-Hub Outlet
DRAWING DEPICTS -1 OR -2 OPTIONS.
SUBTRACT 3/8” WHEN FURNISHED WITH STD. C.I. TOP.
NOTE: VACUUM BREAKER SHOULD BE INSTALLED SUBJECT TO LOCAL CODES.
FLOOR DRAINS
39244 4 59
SPECIFICATION
JOSAM 39600 Series coated cast iron Planting Area Drain with flashing flange and
clamp device, bottom outlet, stainless mesh screen covered dome, secured in place
by bolts.
Available Options
-89 Deck Clamp Assembly
-92 Galvanized Cast Iron Parts
OUTLETS:
-66 No-Hub Side Outlet
-T Threaded Outlet
-X Inside Caulk Outlet
-Z No-Hub Outlet
145
Floor Drains_08.qxd 5/1/08 3:16 PM Page 146
SPECIFICATION
JOSAM 39720 Series coated cast iron Area Drain with composition deck flange, bottom
outlet, 11" round top, heavy-duty, loose-set grate and removable sediment bucket.
Available Options
-1 Satin Finish Nikaloy Top
-2 Satin Finish Bronze Top
-7 Ductile Iron Grate
-13 Dome Grate, Cast Iron
-13-1 Dome Grate, Nikaloy
-13-2 Dome Grate, Bronze
-15 Chained Grate
-VP Secured Grate, Vandal-Proof Screws
-70 Less Bucket
-92 Galvanized Cast Iron Parts
OUTLETS:
ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
-T Threaded Outlet
-X Inside Caulk Outlet FOR OUTLET TYPE SPECIFY -T or -X
TYPE NO. PIPE SIZE LBS.
39722 2 65
39723 3 65
FLOOR DRAINS
39724 4 65
SPECIFICATION
JOSAM 39960 Series coated cast iron Floor Drain, bottom outlet, inside caulk connection,
square top and round hinged grate.
Available Options
-VP Secured Grate, Vandal-Proof Screws
-ARE Acid-Resisting Epoxy
-92 Galvanized Cast Iron Parts
OUTLET:
-X Inside Caulk Outlet
146
Stainless Steel_08.qxd 4/9/08 9:11 AM Page 147
2.
1.
8. & 9.
3.
7.
5.
6 STAINLESS STEEL
147
Stainless Steel_08.qxd 3/28/08 1:33 PM Page 148
Page 151 Page 151 Page 152 Page 152 Page 153
148
Stainless Steel_08.qxd 3/28/08 1:33 PM Page 149
STAINLESS STEEL
Chlorobenzene A A Sodium chlorate A A
Chloroform B B Sodium cyanide A A
Chlorosulfonic acid B C Sodium fluoride A A
Copper chloride B B Sodium hydroxide A A
Copper nitrate A A Sodium hypochlorite F F
Copper sulfate A A Sodium nitrate A A
Ether A A Sodium sulfate A A
Ethylene bromide A A Sodium sulfide A A
Ethyl chloride A A Sodium sulfite A A
Ethylene chloride A A Standus chloride B C
Fatty acids A A Sulfur A A
Fluorine A A Sulfur chloride A A
Formaldehyde A A Sulfur dioxide A B
Formic acid A A Sulfuric acid F F
Furfural A A Sulfurous acid A C
Gallic acid A A Thionyl chloride A A
Hydro bromic acid F F Toluene A A
Hydro chloric acid F F Trichloroethylene A A
Hydrofluoric acid F F Turpentine A A
Hydrogen peroxide A A Xylene A A
Iodine wet F F Zinc sulfate A A
Note: Temperature concentration levels and duration of contact have a direct affect on the resistance of stainless steel to certain chemicals. Flushing small amounts of corro-
sive chemicals with adequate amounts of water will improve the resistance of stainless steel corrosion from harmful chemicals. Each application should be carefully reviewed
to determine the suitability of stainless steel for the project conditions.
149
Stainless Steel_08.qxd 3/28/08 1:33 PM Page 150
PIPE PIPE PIPE PIPE PIPE PIPE PIPE PIPE PIPE PIPE
PIPE SIZE SIZE SIZE SIZE SIZE SIZE SIZE SIZE SIZE SIZE
SCHEDULE 2" 2" 3" 3" 4" 4" 6" 6" 8" 8"
Dimension A B A B A B A B A B
10S 2.157 2.375 3.260 3.50O 4.260 4.500 6.357 6.625 8.329 8.625
40S 2.067 2.375 3.068 3.500 4.026 4.500 6.065 6.625 7.981 8.625
80S 1.939 2.375 2.900 3.500 3.826 4.500 5.761 6.625 7.625 8.625
Unless optional materials are specified, standard material shown in Specification will be provided.
30004-6A-SS -T -80
Outlet Size
Strainer Size
150
Stainless Steel_08.qxd 3/28/08 1:33 PM Page 151
SPECIFICATION
JOSAM 30000-A-SS-T Series Type 316 cast stainless steel Floor Drain, two-piece body
with double drainage flange, WEJLOC® invertible flashing collar, weepholes, bottom
outlet threaded connection and adjustable round SUPER-FLO® strainer.
Available Options
-VP Secured Grate, Vandal-Proof Screws
-49 3/4" Primer Tap
-50 1/2” Primer Tap
-80 Perforated Stainless Steel Basket
OUTLET:
-T Threaded Outlet
ADJUSTABLE STRAINER
PIPE ADJUSTMENT FREE
TYPE NO. SIZE B X Y AREA LBS.†
30002, 3, 4-5A-SS-T 2, 3, 4 5 3/4 2-1/8 7.8 14
30002, 3, 4-6A-SS-T 2, 3, 4 6 1-1/4 2-3/8 11.0 15
30002, 3, 4-7A-SS-T 2, 3, 4 7 1-1/8 2-7/8 13.2 16
30002, 3, 4-8A-SS-T 2, 3, 4 8 1-5/8 2-5/8 16.2 17
† STRAINER WITH BODY
SPECIFICATION
STAINLESS STEEL
JOSAM 30000-S-SS-T Series Type 316 cast stainless steel Floor Drain, two-piece body
with double drainage flange, WEJLOC® invertible flashing collar, weepholes, bottom
outlet connection and adjustable square SUPER-FLO® strainer.
Available Options
-VP Secured Grate, Vandal-Proof Screws
-49 3/4" Primer Tap
-50 1/2” Primer Tap
-80 Perforated Stainless Steel Basket
OUTLET:
-T Threaded Outlet
ADJUSTABLE STRAINER
PIPE ADJUSTMENT FREE
TYPE NO. SIZE B X Y AREA LBS.†
30002, 3, 4-5S-SS-T 2, 3, 4 5 7/8 1-7/8 9.1 15
30002, 3, 4-6S-SS-T 2, 3, 4 6 7/8 2-1/4 13.8 16
30002, 3, 4-8S-SS-T 2, 3, 4 8 1-1/4 2-1/2 24.5 21
† STRAINER WITH BODY
151
Stainless Steel_08.qxd 3/28/08 1:33 PM Page 152
SPECIFICATION
JOSAM 32100-SS-AE Series Type 316 cast stainless steel LEVELEZE® Floor Drain with
double drainage flange, weepholes, round top, adjustable collar with rolled thread and
loose-set anti-tilting SUPER-FLO® grate with perimeter drainage slots, bottom outlet
and butt weld connection for schedule 40 pipe.
Available Options
▼ -81 Shallow Stainless Steel Sediment Bucket
-1 Satin Finish Nikaloy Grate
-8 Solid Cover
-9 Stainless Steel Mesh Screen on Underside of Grate
-21 4” Diameter Funnel
-22 6” Diameter Funnel
-23 9” x 3” Oval Funnel
-25 Stainless Steel Recessed Closure Plug
-26 Molded ABS Recessed Closure Plug
-34 “T” Handle for Recessed Plug
-61 Flashing Clamp Device FOR OUTLET TYPE, SPECIFY BUTT WELD
OUTLET: TYPE NO. PIPE SIZE A LBS.
-69 Schedule 10 S Butt Weld Connection 32102-SS-AE 2 1-7/8 35
32103-SS-AE 3 2 36
32104-SS-AE 4 2-1/8 37
SPECIFICATION
JOSAM 32100-SS-AE-81 Series Type 316 cast stainless steel LEVELEZE® Floor Drain with
STAINLESS STEEL
double drainage flange, weepholes, round top, adjustable collar with rolled thread and
loose-set anti-tilting SUPER-FLO® grate with perimeter drainage slots, shallow sediment
bucket, bottom outlet and butt weld connection for schedule 40 pipe.
SPECIFICATION
JOSAM 32200-SS Series Type 316 cast stainless steel Floor Drain with double drainage
flange, weepholes, round top, loose-set anti-tilting grate, bottom outlet, butt weld
connection for schedule 40 pipe.
Available Options
-8 Solid Cover
-9 S.S. Mesh Screen on Underside of Grate
-22 6” Diameter Funnel
-25 Stainless Steel Recessed Closure Plug
-26 Molded ABS Recessed Closure Plug
-34 “T” Handle for Recessed Plug
-61 Flashing Clamp Device
OUTLET:
-69 Schedule 10 S Butt Weld Connection
STAINLESS STEEL
153
Stainless Steel_08.qxd 3/28/08 1:33 PM Page 154
SPECIFICATION
JOSAM 40300 Series square stainless steel 6" deep SUPER-FLO-SEPTOR® Floor Sink,
bottom outlet, internal dome strainer and stainless steel perforated anti-tilting grate.
Available Options
-MD Mesh Grate
-PF Heavy-Duty Perimeter Drainage Grate
-XHD Bar Grate
-CG Cast Stainless Steel Grate
-B Stainless Steel Bucket
-WT with Trap
OUTLETS:
-SO Side Outlet, 4"
-Z No-Hub Spigot Outlet with Transitional Coupling
SPECIFICATION
JOSAM 40320 Series square stainless steel 6" deep SUPER-FLO-SEPTOR® Floor Sink,
bottom outlet, internal dome strainer and stainless steel perforated anti-tilting grate.
STAINLESS STEEL
Available Options
-MD Mesh Grate
-PF Heavy-Duty Perimeter Drainage Grate
-XHD Bar Grate
-CG Cast Stainless Steel Grate
-B Stainless Steel Bucket
-WT with Trap
OUTLETS:
-Y Hub Outlet with Gasket
-Z No-Hub Spigot Outlet
154
Stainless Steel_08.qxd 3/28/08 1:33 PM Page 155
SPECIFICATION
JOSAM 40340 Series square stainless steel 8" deep SUPER-FLO-SEPTOR® Floor Sink,
bottom outlet, internal dome strainer and stainless steel perforated anti-tilting grate.
Available Options
-MD Mesh Grate
-PF Heavy-Duty Perimeter Drainage Grate
-XHD Bar Grate
-CG Cast Stainless Steel Grate
-B Stainless Steel Bucket
-WT with Trap
OUTLETS:
-Y Hub Outlet with Gasket
-Z No-Hub Spigot Outlet
SPECIFICATION
JOSAM 40460 Series square stainless steel 6" deep Kettle Drain, bottom outlet, internal
dome strainer and stainless steel mesh anti-tilting grate.
STAINLESS STEEL
Available Options
-B Bucket
-WT with Trap
OUTLET:
-Z No-Hub Spigot Outlet with Transitional Coupling
155
Stainless Steel_08.qxd 3/28/08 1:33 PM Page 156
SPECIFICATION
JOSAM 40520 Series round stainless steel 6" deep SUPER-FLO-SEPTOR® Floor Sink,
bottom outlet, internal dome strainer and stainless steel perforated anti-tilting grate.
Available Options
-MD Mesh Grate
-PF Heavy-Duty Perimeter Drainage Grate
-XHD Bar Grate
-CG Cast Stainless Steel Grate
-B Stainless Steel Bucket
-WT with Trap
OUTLETS:
-SO Side Outlet, 4"
-Z No-Hub Spigot Outlet with Transitional Coupling
SPECIFICATION
JOSAM 40580 Series round stainless steel 8" deep SUPER-FLO-SEPTOR® Floor Sink,
bottom outlet, internal dome strainer and stainless steel perforated anti-tilting grate.
STAINLESS STEEL
Available Options
-MD Mesh Grate
-PF Heavy-Duty Perimeter Drainage Grate
-XHD Bar Grate
-CG Cast Stainless Steel Grate
-B Stainless Steel Bucket
-WT with Trap
OUTLETS:
-SO Side Outlet, 4"
-Z No-Hub Spigot Outlet with Transitional Coupling
156
Stainless Steel_08.qxd 3/28/08 1:33 PM Page 157
SPECIFICATION
JOSAM 56670-SS Series Type 316 cast stainless steel round flush Cleanout with
flanged ring and scoriated spanner type flanged screw plug, bottom outlet, butt weld
connection for schedule 40 pipe.
Available Options
-45 Spanner Wrench
OUTLET:
-69 Schedule 10 S Butt Weld Connection
STAINLESS STEEL
157
Stainless Steel_08.qxd 3/28/08 1:33 PM Page 158
Floor Sinks_08.qxd 3/27/08 9:58 AM Page 159
BODY
Sanitation is promoted by the smooth,
uniformly contoured interior which has no
corners or crevices to escape the cleansing
action of drainage flow. Available in depths INTERNAL DOME
of 6, 8 and 10 inches (depending on series) SUPER-FLO-SEPTORS® have an internal dome
to suit every application. which acts as a secondary strainer to inter-
cept debris which could cause blockage of
drain lines. The dome is easily removed to
facilitate cleaning.
Outlet Connections
JOSAM SUPER-FLO-SEPTORS® are furnished with outlets for connection to extra-heavy, service weight or no-hub pipe. The timesaving, economical
JIFFEE-JOINT is used for inside caulk connections. For outlet type, specify (-X) for inside caulk outlet and (-Z) for no-hub spigot outlet.
FLOOR SINKS
159
Floor Sinks_08.qxd 3/27/08 9:58 AM Page 160
Page 162 Page 164 Page 166 Page 168 Page 170 Page 172
Page 163 Page 165 Page 167 Page 169 Page 171 Page 173
Page 174 Page 176 Page 178 Page 175 Page 177 Page 179
Page 180 Page 181 Page 182 Page 183 Page 184 Page 184
160
Floor Sinks_08.qxd 3/27/08 9:58 AM Page 161
Outlet Size
Outlet Type, No-Hub Spigot Outlet
Option, Secured Cover, Vandal-Proof Screws
Option, Sediment Bucket (Aluminum)
Typical Installations
49320A-NB Series SUPER-FLO-SEPTOR® Floor Sink shown installed 49580A-NB Series SUPER-FLO-SEPTOR® Floor Sink shown installed
in a heavy-duty structural concrete finish floor. in a poured concrete floor on the ground level.
Options
FLOOR SINKS
(-C) BOLTED FLASHING (-3) OPTION, 1/2 GRATE (-8) OPTION, DEPRESSED (-31) OPTION, ALUMINUM
CLAMP DEVICE receives discharge lines for con- GRATE SEDIMENT BUCKET
used on sanitary floor sinks with densate wastes or from equip- serves as a shallow sediment for use in food processing areas
double drainage flanges to pro- ment with additional drainage bucket to intercept solids in areas producing solids such as peelings,
vide a positive bond of the water- from floor area. The open portion where limited space between food scraps, seeds, pits and other
proofing membrane to the floor can be situated under equipment floor sink and equipment prevents debris which could cause drain
sink body. while grate portion is exposed to the use of a standard removable line blockage.
traffic. bucket.
161
Floor Sinks_08.qxd 5/1/08 2:41 PM Page 162
SPECIFICATION
JOSAM 49300 Series square cast iron 5-7/8" deep SUPER-FLO-SEPTOR® Floor Sink
with acid-resisting interior, double drainage flange with weepholes, bottom outlet,
aluminum internal dome strainer and cast iron, non-traffic, acid-resisting, anti-tilting,
SUPER-FLO® Grate.
SPECIFICATION
JOSAM 49300-LF Series square cast iron 5-7/8" deep SUPER-FLO-SEPTOR® Floor Sink
with acid-resisting interior, bottom outlet, aluminum internal dome strainer and cast
iron, non-traffic, acid-resisting, anti-tilting, SUPER-FLO® Grate.
OPTIONS N/A: -VP, -8, -20, -24, -C
49304-LF 4 21
OPTIONS
▼ -LF Less Flange -31 Sediment Bucket (Aluminum)
▼ -NB Nickel Bronze Traffic Top -33 Sediment Bucket (A.R. Finish)
-LG Less Grate s -35 Stainless Steel Mesh Bucket Liner
-3 1/2 Grate -43 Internal Dome Strainer (A.R. Finish)
FLOOR SINKS
SPECIFICATION
JOSAM 49300-NB Series square cast iron 6-1/4" deep SUPER-FLO-SEPTOR® Floor Sink
with acid-resisting interior, double drainage flange with weepholes, bottom outlet,
aluminum internal dome strainer, Nikaloy sanitary sloped rim and Nikaloy light-duty,
anti-tilting, SUPER-FLO® Grate.
SPECIFICATION
JOSAM 49300-LF-NB Series square cast iron 6-1/4" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, aluminum internal dome strainer, Nikaloy sanitary
sloped rim and Nikaloy light-duty, anti-tilting, SUPER-FLO® Grate.
OPTION N/A: -C
163
Floor Sinks_08.qxd 5/1/08 4:14 PM Page 164
SPECIFICATION
JOSAM 49320A Series square cast iron 5-7/8" deep SUPER-FLO-SEPTOR® Floor Sink
with acid-resisting interior, double drainage flange with weepholes, bottom outlet,
aluminum internal dome strainer and cast iron, non-traffic, acid-resisting, anti-tilting
grate.
SPECIFICATION
JOSAM 49320A-LF Series square cast iron 5-7/8" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer and
cast iron, non-traffic, acid-resisting, anti-tilting grate.
OPTIONS N/A: -VP, -8, -20, -24, -C
OPTIONS
▼ -LF Less Flange -31 Sediment Bucket (Aluminum)
s -35
▼ -NB Nickel Bronze Traffic Top -33 Sediment Bucket (A.R. Finish)
-LG Less Grate Stainless Steel Mesh Bucket Liner
-3 1/2 Grate -43 Internal Dome Strainer (A.R. Finish)
-4 3/4 Grate -45 Less Internal Dome Strainer
FLOOR SINKS
-5 Nikaloy Extra Heavy-Duty Grate & Rim (Not SUPER-FLO® Design) -55 1/2” Primer Adaptor, 88450 Provided for 2"- 4"
-7 Full Grate with 2-1/2” Center Opening 1/2" Primer Tap, 6"
-8 Stainless Steel Depressed Grate, NB -C Clamp Device, 49320A, 49320A-NB
-VP Secured Grate, Vandal-Proof Screws, NB
-15 Stainless Steel Rim and Grate, NB OUTLETS
-16 Grate with 4” Round Funnel -X Inside Caulk Outlet
-17 Grate with 6” Round Funnel -Y Hub Outlet with Gasket, 2”-4”
-18 Grate with 9” x 3-1/2” Oval Funnel -Z No-Hub Outlet
-20 Solid Nikaloy Cover, NB
-24 Chained Grate, NB s Specify -31 or -33 Bucket
SPECIFICATION
JOSAM 49320A-NB Series square cast iron 6-1/4" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, double drainage flange with weepholes, bottom out-
let, aluminum internal dome strainer, Nikaloy sanitary sloped rim and Nikaloy light-
duty, anti-tilting, SUPER-FLO® Grate.
SPECIFICATION
JOSAM 49320A-LF-NB Series square cast iron 6-1/4" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer,
Nikaloy sanitary sloped rim and Nikaloy light-duty, anti-tilting, SUPER-FLO® Grate.
OPTION N/A: -C
165
Floor Sinks_08.qxd 5/1/08 2:41 PM Page 166
SPECIFICATION
JOSAM 49340A Series square cast iron 8" deep SUPER-FLO-SEPTOR® Floor Sink with
acid-resisting interior, double drainage flange with weepholes, bottom outlet, alu-
minum internal dome strainer and cast iron, non-traffic, acid-resisting, anti-tilting
grate.
SPECIFICATION
JOSAM 49340A-LF Series square cast iron 8" deep SUPER-FLO-SEPTOR® Floor Sink
with acid-resisting interior, bottom outlet, aluminum internal dome strainer and cast
iron, non-traffic, acid-resisting, anti-tilting grate.
OPTIONS N/A: -VP, -8, -20, -24, -C
OPTIONS
▼ -LF Less Flange -31 Sediment Bucket (Aluminum)
s -35
▼ -NB Nickel Bronze Traffic Top -33 Sediment Bucket (A.R. Finish)
-LG Less Grate Stainless Steel Mesh Bucket Liner
-3 1/2 Grate -43 Internal Dome Strainer (A.R. Finish)
-4 3/4 Grate -45 Less Internal Dome Strainer
FLOOR SINKS
SPECIFICATION
JOSAM 49340A-NB Series square cast iron 8-3/8" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, double drainage flange with weepholes, bottom out-
let, aluminum internal dome strainer, Nikaloy sanitary sloped rim and Nikaloy, light-
duty, anti-tilting, SUPER-FLO® Grate.
SPECIFICATION
JOSAM 49340A-LF-NB Series square cast iron 8-3/8" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer,
Nikaloy sanitary sloped rim and Nikaloy, light-duty, anti-tilting, SUPER-FLO® Grate.
OPTION N/A: -C
167
Floor Sinks_08.qxd 5/1/08 2:41 PM Page 168
SPECIFICATION
JOSAM 49360A Series square cast iron 9-7/8" deep SUPER-FLO-SEPTOR® Floor Sink
with acid-resisting interior, double drainage flange with weepholes, bottom outlet,
aluminum internal dome strainer and cast iron, non-traffic, acid-resisting, anti-tilting
grate.
SPECIFICATION
JOSAM 49360A-LF Series square cast iron 9-7/8" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer and
cast iron, non-traffic, acid-resisting, anti-tilting grate.
OPTIONS N/A: -VP, -8, -20, -24, -C
OPTIONS
▼ -LF Less Flange -31 Sediment Bucket (Aluminum)
▼ -NB Nickel Bronze Traffic Top -32 Shallow Sediment Bucket (Aluminum)
s -35
-LG Less Grate -33 Sediment Bucket (A.R. Finish)
-3 1/2 Grate Stainless Steel Mesh Bucket Liner
-4 3/4 Grate -43 Internal Dome Strainer (A.R. Finish)
FLOOR SINKS
-5 Nikaloy Extra Heavy-Duty Grate & Rim (Not SUPER-FLO® Design) -45 Less Internal Dome Strainer
-7 Full Grate with 2-1/2” Center Opening -55 1/2” Primer Adapter, 88450 Provided
-8 Stainless Steel Depressed Grate, NB -C Clamp Device, 49360A, 49360A-NB
-VP Secured Grate, Vandal-Proof Screws, NB
-15 Stainless Steel Rim and Grate OUTLETS
-16 Grate with 4” Round Funne -X Inside Caulk Outlet
-17 Grate with 6” Round Funnel -Y Hub Outlet with Gasket
-18 Grate with 9” x 3-1/2” Oval Funnel -Z No-Hub Outlet
-20 Solid Nikaloy Cover, NB
-24 Chained Grate, NB s Specify -31 or -33 Bucket
SPECIFICATION
JOSAM 49360A-NB Series square cast iron 10-1/4" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, double drainage flange with weepholes, bottom out-
let, aluminum internal dome strainer, Nikaloy sanitary sloped rim and Nikaloy light-
duty, anti-tilting, SUPER-FLO® Grate.
SPECIFICATION
JOSAM 49360A-LF-NB Series square cast iron 10-1/4" deep SUPER-FLO-SEPTOR®
Floor Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer,
Nikaloy sanitary sloped rim and Nikaloy light-duty, anti-tilting, SUPER-FLO® Grate.
OPTION N/A: -C
169
Floor Sinks_08.qxd 5/1/08 2:41 PM Page 170
SPECIFICATION
JOSAM 49400 Series square cast iron 6" deep SUPER-FLO-SEPTOR® Floor Sink with
acid-resisting interior, double drainage flange with weepholes, bottom outlet, alu-
minum internal dome strainer, cast iron, non-traffic, acid-resisting, anti-tilting SUPER-
FLO® Grate.
SPECIFICATION
JOSAM 49400-LF Series square cast iron 6" deep SUPER-FLO-SEPTOR® Floor Sink
with acid-resisting interior, bottom outlet, aluminum internal dome strainer, cast iron,
non-traffic, acid-resisting, anti-tilting SUPER-FLO® Grate.
OPTIONS N/A: -VP, -C
OPTIONS
▼ -LF Less Flange s -35 Stainless Steel Mesh Bucket Liner
▼ -NB Nickel Bronze Traffic Top -43 Internal Dome Strainer (A.R. Finish)
-LG Less Grate -45 Less Internal Dome Strainer
-3 1/2 Grate -55 1/2” Primer Adapter, 88450 Provided for 3”,4”
FLOOR SINKS
SPECIFICATION
JOSAM 49400-NB Series square cast iron 6-1/4" deep SUPER-FLO-SEPTOR® Floor Sink
with acid-resisting interior, double drainage flange with weepholes, bottom outlet,
aluminum internal dome strainer, Nikaloy sanitary sloped rim and Nikaloy, light-duty,
anti-tilting, SUPER-FLO® Grate.
SPECIFICATION
JOSAM 49400-LF-NB Series square cast iron 6-1/4" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer,
Nikaloy sanitary sloped rim and Nikaloy, light-duty, anti-tilting, SUPER-FLO® Grate.
OPTION N/A: -C
171
Floor Sinks_08.qxd 5/1/08 2:41 PM Page 172
SPECIFICATION
JOSAM 49420 Series square cast iron 12" deep SUPER-FLO-SEPTOR® Floor Sink with
acid-resisting interior, double drainage flange with weepholes, bottom outlet, alu-
minum internal dome strainer and cast iron, non-traffic, acid-resisting, anti-tilting,
SUPER-FLO® Grate.
SPECIFICATION
JOSAM 49420-LF Series square cast iron 12" deep SUPER-FLO-SEPTOR® Floor Sink
with acid-resisting interior, bottom outlet, aluminum internal dome strainer and cast
iron, non-traffic, acid-resisting, anti-tilting, SUPER-FLO® Grate.
OPTIONS N/A: -C, -VP
OPTIONS
▼ -LF Less Flange s -35 Stainless Steel Mesh Bucket Liner
▼ -NB Nickel Bronze Traffic Top -43 Internal Dome Strainer (A.R. Finish)
-LG Less Grate -45 Less Internal Dome Strainer
-3 1/2 Grate -51 Galvanized Cast Iron Inside and Outside
FLOOR SINKS
SPECIFICATION
JOSAM 49420-NB Series square cast iron 12-1/4" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, double drainage flange with weepholes, bottom out-
let, aluminum internal dome strainer, Nikaloy sanitary sloped rim and Nikaloy, light-
duty, anti-tilting, SUPER-FLO® Grate.
SPECIFICATION
JOSAM 49420-LF-NB Series square cast iron 12-1/4" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer,
Nikaloy sanitary sloped rim and Nikaloy, light-duty, anti-tilting, SUPER-FLO® Grate.
OPTION N/A: -C
173
Floor Sinks_08.qxd 5/1/08 4:14 PM Page 174
SPECIFICATION
JOSAM 49500 Series round cast iron 3-5/16" deep SUPER-FLO-SEPTOR® Floor Sink
with acid-resisting interior, double drainage flange with weepholes, bottom outlet,
aluminum internal dome strainer and cast iron, non-traffic, acid-resisting, anti-tilting,
SUPER-FLO® Grate.
SPECIFICATION
JOSAM 49500-LF Series round cast iron 3-5/16" deep SUPER-FLO-SEPTOR® Floor Sink
with acid-resisting interior, bottom outlet, aluminum internal dome strainer and cast
iron, non-traffic, acid-resisting, anti-tilting, SUPER-FLO® Grate.
OPTIONS N/A: -VP, -C, -8
OPTIONS
▼ -LF Less Flange s -35 Stainless Steel Mesh Bucket Liner
▼ -NB Nickel Bronze Traffic Top -43 Internal Dome Strainer (A.R. Finish)
-LG Less Grate -45 Less Internal Dome Strainer
-3 1/2 Grate -51 Galvanized Cast Iron Inside and Outside
FLOOR SINKS
SPECIFICATION
JOSAM 49500-NB Series round cast iron 3-9/16" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, double drainage flange with weepholes, bottom out-
let, aluminum internal dome strainer, Nikaloy sanitary sloped rim and Nikaloy, light-
duty, anti-tilting, SUPER-FLO® Grate.
SPECIFICATION
JOSAM 49500-LF-NB Series round cast iron 3-9/16" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer,
Nikaloy sanitary sloped rim and Nikaloy, light-duty, anti-tilting, SUPER-FLO® Grate.
OPTION N/A: -C
175
Floor Sinks_08.qxd 5/1/08 4:14 PM Page 176
SPECIFICATION
JOSAM 49520A Series round cast iron 6" deep SUPER-FLO-SEPTOR® Floor Sink with
acid-resisting interior, double drainage flange with weepholes, bottom outlet, alu-
minum internal dome strainer, cast iron, non-traffic, acid-resisting, anti-tilting, SUPER-
FLO® Grate.
SPECIFICATION
JOSAM 49520A-LF Series round cast iron 6" deep SUPER-FLO-SEPTOR® Floor Sink
with acid-resisting interior, bottom outlet, aluminum internal dome strainer, cast iron,
non-traffic, acid-resisting, anti-tilting, SUPER-FLO® Grate.
OPTIONS N/A: -VP, -C, -8
OPTIONS
▼ -LF Less Flange s -35 Stainless Steel Mesh Bucket Liner
▼ -NB Nickel Bronze Traffic Top -43 Internal Dome Strainer (A.R. Finish)
-LG Less Grate -45 Less Internal Dome Strainer
-3 1/2 Grate -51 Galvanized Cast Iron Inside and Outside
FLOOR SINKS
SPECIFICATION
JOSAM 49520A-NB Series round cast iron 6-1/4" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, double drainage flange with weepholes, bottom out-
let, aluminum internal dome strainer, Nikaloy sanitary sloped rim and Nikaloy, light-
duty, anti-tilting, SUPER-FLO® Grate.
SPECIFICATION
JOSAM 49520A-LF-NB Series round cast iron 6-1/4" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer,
Nikaloy sanitary sloped rim and Nikaloy, light-duty, anti-tilting, SUPER-FLO® Grate.
OPTION N/A: -C
177
Floor Sinks_08.qxd 5/1/08 4:14 PM Page 178
SPECIFICATION
JOSAM 49580A Series round cast iron 8" deep SUPER-FLO-SEPTOR® Floor Sink with
acid-resisting interior, double drainage flange with weepholes, bottom outlet, alu-
minum internal dome strainer, cast iron, non-traffic, acid-resisting, anti-tilting, SUPER-
FLO® Grate.
SPECIFICATION
JOSAM 49580A-LF Series round cast iron 8" deep SUPER-FLO-SEPTOR® Floor Sink
with acid-resisting interior, bottom outlet, aluminum internal dome strainer, cast iron,
non-traffic, acid-resisting, anti-tilting, SUPER-FLO® Grate.
OPTIONS N/A: -VP, -C, -8
OPTIONS
▼ -LF Less Flange s -35 Stainless Steel Mesh Bucket Liner
▼ -NB Nickel Bronze Traffic To -43 Internal Dome Strainer (A.R. Finish)
-LG Less Grate -45 Less Internal Dome Strainer
-3 1/2 Grate -51 Galvanized Cast Iron Inside and Outside
FLOOR SINKS
SPECIFICATION
JOSAM 49580A-NB Series round cast iron 8-1/4" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, double drainage flange with weepholes, bottom out-
let, aluminum internal dome strainer, Nikaloy sanitary sloped rim and Nikaloy, light-
duty, anti-tilting, SUPER-FLO® Grate.
SPECIFICATION
JOSAM 49580A-LF-NB Series round cast iron 8-1/4" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer,
Nikaloy sanitary sloped rim and Nikaloy, light-duty, anti-tilting, SUPER-FLO® Grate.
OPTION N/A: -C
179
Floor Sinks_08.qxd 5/1/08 4:14 PM Page 180
SPECIFICATION
JOSAM 49700 Series rectangular cast iron 3-1/2" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, double drainage flange with weepholes, bottom out-
let, aluminum internal dome strainer and cast iron, non-traffic, acid-resisting grate.
SPECIFICATION
JOSAM 49700-LF Series rectangular cast iron 3-1/2" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer and
cast iron, non-traffic, acid-resisting grate.
OPTIONS N/A: -VP, -C, -8
OPTIONS
▼ -LF Less Flange -52 Painted Inside and Outside
▼ -NB Nickel Bronze Traffic Top -55 1/2” Primer Adapter, 88450 Provided
-LG Less Grate -C Clamp Device, 49700, 49700-NB
-3 1/2 Grate
FLOOR SINKS
SPECIFICATION
JOSAM 49700-NB Series rectangular cast iron 4" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, double drainage flange with weepholes, bottom out-
let, aluminum internal dome strainer, Nikaloy rim and light-duty, anti-tilting, Nikaloy
grate.
SPECIFICATION
JOSAM 49700-LF-NB Series rectangular cast iron 4" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer,
Nikaloy rim and light-duty, anti-tilting, Nikaloy grate.
OPTION N/A: -C
181
Floor Sinks_08.qxd 5/2/08 12:50 PM Page 182
SPECIFICATION
JOSAM 49720 Series rectangular cast iron 6-1/2" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, double drainage flange with weepholes, bottom out-
let, aluminum internal dome strainer and cast iron, non-traffic, acid-resisting grate.
SPECIFICATION
JOSAM 49720-LF Series rectangular cast iron 6-1/2" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer and
cast iron, non-traffic, acid-resisting grate.
OPTIONS N/A: -VP, -C, -8
OPTIONS
▼ -LF Less Flange -51 Galvanized Cast Iron Inside and Outside
▼ -NB Nickel Bronze Traffic Top -52 Painted Inside and Outside
-LG Less Grate -55 1/2” Primer Adapter, 88450 Provided for 3", 4"
-3 1/2 Grate 1/2" Primer Tap, 6"
FLOOR SINKS
SPECIFICATION
JOSAM 49720-NB Series rectangular cast iron 7" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, double drainage flange with weepholes, bottom out-
let, aluminum internal dome strainer, Nikaloy rim and light-duty, anti-tilting, Nikaloy
grate.
SPECIFICATION
JOSAM 49720-LF-NB Series rectangular cast iron 7" deep SUPER-FLO-SEPTOR® Floor
Sink with acid-resisting interior, bottom outlet, aluminum internal dome strainer,
Nikaloy rim and light-duty, anti-tilting, Nikaloy grate.
OPTION N/A: -C
183
Floor Sinks_08.qxd 5/1/08 2:41 PM Page 184
SPECIFICATION
JOSAM 49850 Series round cast iron Floor Sink with acid-resisting interior, double
drainage flange with weepholes, bottom outlet, inside caulk connection, flushing connec-
tions, bronze flushing rim, and Nikaloy round top with light-duty perforated hinged grate.
Options
-VP Secured Grate, Vandal-Proof Screws
-13 One-Piece Satin Nikaloy Grate
-14 Loose-Set Satin Nikaloy Grate
-51 Galvanized Cast Iron Inside and Outside
-98 Water Supply Control Box
-C Clamp Device
OUTLETS
-X Inside Caulk Outlet, 2"- 4"
-Z No-Hub Spigot Outlet, 6”
Options
TYPE NO. PIPE SIZE LBS.
OUTLETS
-X Inside Caulk Outlet
-Z No-Hub Spigot Outlet
FLOOR SINKS
184
Cleanouts_08.qxd 3/27/08 10:53 AM Page 185
CLEANOUT FEATURES
KLEENATRON® II Features
CLEANOUTS
JOSAM KLEENATRON® II Cleanouts incorporate features developed to meet
55000
the latest in building construction methods. These features ensure the specifier,
installer and user of completely trouble-free installation and performance.
ADJUSTABLE BUSHING
Precision machine threaded cast
55000-Y Series KLEENATRON®
iron bushing provides LEVELEZE® Cleanouts feature JOSAM
adjustment; non-tilting top. Body JIFFEE-SET connections with
protects threads from concrete,
allowing adjustment after pour. MULTI-TITE® service weight (SV)
soil pipe gaskets in 2, 3 and
4 inch sizes for labor-saving
EASY IN – EASY OUT assembly to service weight and
CLOSURE PLUG
ABS plastic closure plug with no-hub cast iron pipe, and to PVC
gas-tight sealing tapered threads. and ABS pipe. Merely lubricate
gasket and pipe, set cleanout in
place, push down until top of pipe
contacts built-in stop and the
joint is complete.
OPTIONAL CLAMP RING
To secure waterproof membrane
to flashing flange.
185
Cleanouts_08.qxd 3/27/08 10:53 AM Page 186
CLEANOUTS
How to Order
FLOOR CLEANOUTS – Unless optional materials are specified, standard material shown in Specification will be provided.
CLEANOUTS
WALL 0R FLOOR ACCESS COVERS – When outlet size does not apply, refer to dimension table for Type No. to be ordered.
Example: Series No. 58630 Type No. 58631
58631 -CO3 -20 -VP
Type No. for 8” x 8” Cover
No-Hub Cleanout, 3”
Raised Head Bronze Plug
Secured Cover, Vandal-Proof Screws
Page 188 Page 188 Page 189 Page 190 Page 191 Page 192
Page 192 Page 192 Page 193 Page 193 Page 194 Page 194
186
Cleanouts_08.qxd 3/27/08 10:54 AM Page 187
CLEANOUTS
Page 195 Page 196 Page 196 Page 197 Page 201 Page 191
Page 195 Page 203 Page 204 Page 198 Page 198 Page 199
Page 199 Page 200 Page 200 Page 201 Page 201 Page 202
COMBINATIONS
58610-CO 58610-COT 58630-CO 58630-COT 58640-CO 58640-COT
Access Cover with Anchor Access Cover with Anchor Hinged Access Cover Hinged Access Cover Secured Cover and Secured Cover and
Lugs & No-Hub Cleanout Lugs & No-Hub Cleanout Tee and No-Hub Cleanout and No-Hub Cleanout Tee No-Hub Cleanout No-Hub Cleanout Tee
Page 201 Page 201 Page 202 Page 202 Page 203 Page 203
187
Cleanouts_08.qxd 5/1/08 3:02 PM Page 188
CLEANOUTS
55000 SERIES LEVELEZE® KLEENATRON® II SPECIAL-DUTY
APPLICATION A
For use in finished or unfinished floors subject to heavy wheel traffic such as ware-
houses, loading docks and warehouse stores. Top design allows for unimpaired
adjustment even as the floor is being poured.
CLEANOUTS
SPECIFICATION ADJUSTABLE
X - MIN CAST IRON
JOSAM 55000 Series coated cast iron LEVELEZE® KLEENATRON® II Floor Cleanout, OPTIONAL (-41)
Y - MAX BUSHING CLAMP RING
internal ABS cleanout plug, adjustable cast iron housing with special-duty scoriated THREADED
ABS PLUG
secured round cast iron cover. OPTIONAL (-F)
FLANGE
Available Options
▼ -1 Satin Finish Nikaloy Top -SS-SQ Square Top, Stainless Steel
▼ -1-SD Special-Duty Satin Finish ▼ -5 Ductile Iron Top B
Nikaloy Top -14 Carpet Cleanout Marker
D
▼ -1-SQ Square Top, -VP Secured Cover,
Satin Finish Nikaloy Vandal-Proof Screws
▼ -1-12 Cover Recessed for Tile, -22 Taper Thread Bronze Plug
Satin Finish Nikaloy PIPE SIZE
-31 Galvanized Cast Iron Parts
▼ -1-13 Terrazzo Tile Cover, C
-41 Clamp Ring and Flange
Satin Finish Nikaloy
-F Flange Only
-2 Satin Finish Bronze Top FLANGE STANDARD ON 4” -X AND 6” SIZES.
-WF Wide Flange *
-2-SD Special-Duty Satin Finish (not available on Cl)
Bronze Top FOR OUTLET TYPE SPECIFY -X, -Y or -Z
-CFC Carpet Cleanout Flange
-2-SQ Square Top, TYPE NO. PIPE SIZE A B C* D X Y LBS.
Cover
Satin Finish Bronze 55002 2 6 3-3/4 7-1/2 5-9/16 2-3/4 4-1/4 15
OUTLETS:
-2-12 Cover Recessed for Tile, 55003 3 6 3-3/4 7-1/2 5-9/16 2-3/4 4-1/4 15
Satin Finish Bronze -X Inside Caulk Outlet
55004 4 6 3-3/4 7-1/2 5-9/16 2-3/4 4-1/4 16
-2-13 Terrazzo Tile Cover, -Y Hub Outlet w/Gasket, 2”-4”
55004-X 4 7-1/2 4-1/4 9-3/16 7 2-5/8 4-5/16 18
Satin Finish Bronze -Z No-Hub Outlet
55005-Z 5 6 3-3/4 7-1/2 5-9/16 2-3/4 4-1/4 16
-SS Stainless Steel Top 55006-Z 6 7-1/2 4-1/4 9-3/16 7 2-5/8 4-5/16 18
PIPE SIZE
CLEANOUTS
55000-5 SERIES with -5 Ductile Iron Top
APPLICATION A
For use in finished or unfinished floors subject to heavy wheel traffic or impact loads,
such as warehouses, loading docks and warehouse stores. Top design allows for
unimpaired adjustment even as the floor is being poured.
CLEANOUTS
SPECIFICATION ADJUSTABLE
X - MIN CAST IRON
JOSAM 55000-5 Series coated cast iron LEVELEZE® KLEENATRON® II Floor Cleanout, OPTIONAL (-41)
Y - MAX BUSHING CLAMP RING
internal ABS cleanout plug, adjustable cast iron housing with special-duty scoriated THREADED
ABS PLUG
secured round ductile iron cover. OPTIONAL (-F)
FLANGE
OPTION N/A:
-WF
PIPE SIZE
For use in finished or unfinished floors subject to heavy wheel traffic or impact loads,
such as warehouses, loading docks and warehouse stores. Top design allows for
unimpaired adjustment even as the floor is being poured.
SPECIFICATION ADJUSTABLE
X - MIN
JOSAM 55000-1-SD Series coated cast iron LEVELEZE® KLEENATRON® II Floor Cleanout, CAST IRON
Y - MAX BUSHING
OPTIONAL (-41)
CLAMP RING
internal ABS cleanout plug, adjustable cast iron housing with special-duty scoriated THREADED
ABS PLUG
secured round laminated satin Nikaloy cover. OPTIONAL (-F)
FLANGE
PIPE SIZE
189
Cleanouts_08.qxd 5/1/08 3:02 PM Page 190
CLEANOUTS
55000-1-SQ SERIES with -1-SQ Nikaloy Square Top
APPLICATION
A SQ.
For use in finished floors subject to pedestrian and light wheel traffic such as schools,
hospitals and shopping malls where a square top complements construction or floor
finish. Top design allows for unimpaired adjustment even as the floor is being poured.
CLEANOUTS
ADJUSTABLE
SPECIFICATION CAST IRON OPTIONAL (-41)
X - MIN BUSHING CLAMP RING
JOSAM 55000-1-SQ Series coated cast iron LEVELEZE® KLEENATRON® II Floor Cleanout, Y - MAX THREADED
ABS PLUG
internal ABS cleanout plug, adjustable cast iron housing with medium-duty scoriated OPTIONAL (-F)
FLANGE
secured square satin Nikaloy cover.
OPTION N/A:
-WF
PIPE SIZE
For use in finished floors subject to pedestrian and light wheel traffic such as schools, A
hospitals and shopping malls where the recessed cover accepts matching tile to com-
plement floor finish. Top design allows for unimpaired adjustment even as the floor is
being poured.
ADJUSTABLE
SPECIFICATION X - MIN
CAST IRON
BUSHING
OPTIONAL (-41)
Y - MAX CLAMP RING
JOSAM 55000-1-12 Series coated cast iron LEVELEZE® KLEENATRON® II Floor Cleanout, THREADED
ABS PLUG
internal ABS cleanout plug, adjustable cast iron housing with medium-duty scoriated OPTIONAL (-F)
FLANGE
secured round satin Nikaloy cover recessed for tile.
PIPE SIZE
190
Cleanouts_08.qxd 5/2/08 12:58 PM Page 191
CLEANOUTS
55000-1-13 SERIES with -1-13 Terrazzo Tile Cover
APPLICATION A
For use in finished floors subject to pedestrian and light wheel traffic such as schools,
hospitals and shopping malls where the recessed cover accepts terrazzo flooring. Top
design allows for unimpaired adjustment even as the floor is being poured.
CLEANOUTS
SPECIFICATION ADJUSTABLE
X - MIN
JOSAM 55000-1-13 Series coated cast iron LEVELEZE® KLEENATRON® II Floor Cleanout, CAST IRON OPTIONAL (-41)
Y - MAX BUSHING CLAMP RING
internal ABS cleanout plug, adjustable cast iron housing with medium-duty scoriated THREADED
ABS PLUG
secured round satin Nikaloy cover recessed for terrazzo flooring. OPTIONAL (-F)
FLANGE
OPTION N/A:
-WF
PIPE SIZE
SPECIFICATION
JOSAM 56670 Series round cast Nikaloy Floor Cleanout, inside caulk connection, and
threaded satin scoriated round cover with spanner wrench sockets.
Available Options
-2 Satin Finish Bronze Top
-11 Smooth Top
-14 Carpet Cleanout Marker
-24 Spanner Wrench
OUTLET:
-X Inside Caulk Outlet
191
Cleanouts_08.qxd 3/27/08 10:54 AM Page 192
CLEANOUTS
57008-Z-CI SERIES LEVELEZE® KLEENATRON®
APPLICATION
For use in finished or unfinished floors subject to heavy wheel traffic such as ware-
houses, loading docks and warehouse stores. Top design allows for unimpaired
adjustment even as the floor is being poured.
CLEANOUTS
SPECIFICATION
JOSAM 57008-Z-CI Series coated cast iron LEVELEZE® KLEENATRON® Floor Cleanout,
internal gasketed ABS cleanout plug and adjustable ABS housing with special-duty
scoriated secured round cast iron top.
Available Options
▼ -1 Satin Finish Nikaloy Top -14 Carpet Cleanout Marker
▼ -1-SD Special-Duty SF Nikaloy Top -VP Secured Cover, VP Screws
▼ -1-SQ Square Top, SF Nikaloy -22 Taper Thread Bronze Plug
▼ -1-12 Cover Recessed for Tile, -31 Galvanized Cast Iron Parts
Satin Finish Nikaloy -WF Wide Flange (N/A on C.I.)
-2 Satin Finish Bronze Top -CFC Carpet Cleanout Flange Cover
-2-SD Special-Duty SF Bronze Top OUTLET: FOR OUTLET TYPE SPECIFY -Z
-2-SQ Square Top, SF Bronze -Z No-Hub Outlet
-2-12 Cover Recessed for Tile, TYPE NO. PIPE SIZE LBS.
Satin Finish Bronze 57008-Z-CI 8 25
SPECIFICATION
JOSAM 57008-Z-1 Series coated cast iron LEVELEZE® KLEENATRON® Floor Cleanout,
internal gasketed ABS cleanout plug, no-hub connection, and adjustable ABS housing
with medium-duty scoriated secured round satin Nikaloy top.
CLEANOUTS
57008-Z-1-SQ SERIES with -1-SQ Nikaloy Square Top
APPLICATION
For use in finished floors subject to pedestrian and light wheel traffic such as schools,
hospitals and shopping malls where a square top complements construction or floor
finish. Top design allows for unimpaired adjustment even as the floor is being poured.
CLEANOUTS
SPECIFICATION
JOSAM 57008-Z-1-SQ Series coated cast iron LEVELEZE® KLEENATRON® Floor
Cleanout, internal gasketed ABS cleanout plug, no-hub connection, and adjustable
ABS housing with medium-duty scoriated secured square satin Nikaloy top.
SPECIFICATION
JOSAM 57008-Z-1-12 Series coated cast iron LEVELEZE® KLEENATRON® Floor
Cleanout, internal gasketed ABS cleanout plug, no-hub connection, and adjustable
ABS housing with medium-duty scoriated secured round satin Nikaloy cover recessed
for tile.
193
Cleanouts_08.qxd 3/27/08 10:54 AM Page 194
CLEANOUTS
58360 SERIES ADJUSTABLE FLOOR CLEANOUT
APPLICATION
For use in finished floors subject to pedestrian and light wheel traffic such as strip
malls and light commercial buildings where a full line sized plug is not required. Top
design allows for adjustment.
CLEANOUTS
SPECIFICATION
JOSAM 58360 Series coated cast iron Ferrule and adjustable cast Nikaloy Floor
Cleanout, internal bronze countersunk plug and solid scoriated secured round cover.
Available Options
-2 Satin Finish Bronze Top
-14 Carpet Cleanout Marker
-VP Secured Cover, Vandal-Proof Screws
-31 Galvanized Cast Iron Parts
OUTLETS:
-Y Hub Outlet w/Gasket, 2”-4”
-Z No-Hub Spigot Outlet
CONFORMS WITH ASTM-C564.
SPECIFICATION
JOSAM 58460A Series coated cast iron Floor Cleanout, internal bronze countersunk
plug, inside caulk connection, and scoriated round top.
Available Options
▼ -AE Adjustable Extension
-1 Satin Finish Nikaloy Top
-2 Satin Finish Bronze Top
-6 Square Top, Cast Iron
-6-1 Square Top, Nikaloy
-6-2 Square Top, Bronze
-12 Top Recessed for Tile
-14 Carpet Cleanout Marker
-VP Secured Cover, Vandal-Proof Screws
-20 Raised Head Bronze Plug
-31 Galvanized Cast Iron Parts
OUTLET:
-X Inside Caulk Outlet ▲ ADD 1/4" WHEN FURNISHED WITH NIKALOY OR BRONZE TOP.
CLEANOUTS
58460A-AE SERIES with -AE Adjustable Extension
APPLICATION
For use in finished floors subject to pedestrian and light wheel traffic such as schools,
hospitals and shopping malls where an oversized cover and body are desired. Top
design allows for adjustment even as the floor is being poured.
CLEANOUTS
SPECIFICATION
JOSAM 58460A-AE Series coated cast iron LEVELEZE® Floor Cleanout, adjustable col-
lar with rolled thread and internal bronze countersunk plug, inside caulk connection,
satin Nikaloy rim and scoriated secured round Nikaloy cover.
SPECIFICATION
JOSAM 58540 Series countersunk bronze N.P.T. Threaded Plug for use in conjunction
with JOSAM cleanouts or standard pipe fittings.
Available Options
-19 Plug Tapped for Center Screw
-20 Raised Head Bronze Plug
195
Cleanouts_08.qxd 5/2/08 12:58 PM Page 196
CLEANOUTS
58580 SERIES ACCESS HOUSING AND COVER
APPLICATION
For use in finished or unfinished floors subject to heavy wheel traffic such as ware-
houses, loading docks and warehouse stores. May be used with cast iron or plastic
cleanout ferrule and plug supplied by others. LEVELOC® thumb screws allow top to be
secured to ferrule.
CLEANOUTS
SPECIFICATION
JOSAM 58580 Series ABS Floor Access Housing with special-duty scoriated secured
round cast iron top and LEVELOC® screws.
Available Options
▼ -1 Satin Finish Nikaloy Top
▼ -1-SD Special-Duty Satin Finish Nikaloy Top
▼ -1-SQ Square Top, Satin Finish Nikaloy
-2 Satin Finish Bronze Top
-2-SD Special-Duty Satin Finish Bronze Top
-2-SQ Square Top, Satin Finish Bronze
-5 Ductile Iron Top
SPECIFICATION
JOSAM 58580-1 Series ABS Floor Access Housing with scoriated secured round satin
Nikaloy top and LEVELOC® screws.
CLEANOUTS
58580-1-SD SERIES with -1-SD Nikaloy Special-Duty Top
APPLICATION
For use in finished or unfinished floors subject to heavy wheel traffic or impact loads,
such as warehouses, loading docks and warehouse stores. May be used with cast
iron or plastic cleanout ferrule and plug supplied by others. LEVELOC® thumb screws
allow top to be secured to ferrule.
CLEANOUTS
SPECIFICATION
JOSAM 58580-1-SD Series ABS Floor Access Housing with special-duty scoriated
secured round laminated satin Nikaloy cover and LEVELOC® screws.
SPECIFICATION
JOSAM 58580-1-SQ Series ABS Floor Access Housing with medium-duty scoriated
secured square satin Nikaloy top and LEVELOC® screws.
197
Cleanouts_08.qxd 3/27/08 10:54 AM Page 198
CLEANOUTS
58600 SERIES WALL ACCESS COVER
APPLICATION
For use in finished walls to conceal cleanout fittings.
SPECIFICATION
JOSAM 58600 Series round stainless steel Wall Access Cover with screw.
CLEANOUTS
Available Options
-VP Secured Cover, -PLG6 Bronze NPT Plug, 6”
Vandal-Proof Screws -20 * Raised Head Bronze Plug
-17 Center Screw Longer -CO2 No-Hub Cleanout, 2”
than Standard -CO3 No-Hub Cleanout, 3”
-PLG1-1/2 Bronze NPT Plug, 1-1/2” -CO4 No-Hub Cleanout, 4”
-PLG2 Bronze NPT Plug, 2” -CO6 No-Hub Cleanout, 6”
-PLG2-1/2 Bronze NPT Plug, 2-1/2” -31 ** Galv. Cast Iron Parts
-PLG3 Bronze NPT Plug, 3” -COT2 No-Hub Cleanout Tee, 2”
-PLG3-1/2 Bronze NPT Plug, 3-1/2” -COT3 No-Hub Cleanout Tee, 3”
-PLG4 Bronze NPT Plug, 4” -COT4 No-Hub Cleanout Tee, 4”
-PLG5 Bronze NPT Plug, 5” -COT6 No-Hub Cleanout Tee, 6”
SPECIFICATION
JOSAM 58610 Series round cast Nikaloy Access Frame with anchor lugs and satin
smooth secured cover.
Available Options
-2 Satin Finish Bronze Top
-10 Scoriated Cover
-14 Carpet Cleanout Marker
-VP Secured Cover, Vandal-Proof Screws
-CO2 No-Hub Cleanout, 2”
-CO3 No-Hub Cleanout, 3”
-CO4 No-Hub Cleanout, 4”
-CO6 No-Hub Cleanout, 6”
-20 ** Raised Head Bronze Plug
-31 ** Galvanized Cast Iron Parts
-COT2 No-Hub Cleanout Tee, 2”
-COT3 No-Hub Cleanout Tee, 3”
-COT4 No-Hub Cleanout Tee, 4”
-COT6 No-Hub Cleanout Tee, 6”
198
Cleanouts_08.qxd 3/27/08 10:54 AM Page 199
CLEANOUTS
58620 SERIES WALL OR FLOOR ACCESS COVER
APPLICATION
For use in finished walls or floors subject to pedestrian or light wheel traffic, to pro-
vide access to cleanout plugs, valves, controls or other equipment. Hinged cover
allows for easy access.
CLEANOUTS
SPECIFICATION
JOSAM 58620 Series round cast Nikaloy Access Frame with anchor flange and satin
smooth hinged cover.
Available Options
-2 Satin Finish Bronze Top -CO6 No-Hub Cleanout, 6”
-10 Scoriated Cover -20 ** Raised Head Bronze Plug
-14 Carpet Cleanout Marker -31 ** Galvanized Cast Iron Parts
-VP Secured Cover, -COT2 No-Hub Cleanout Tee, 2”
Vandal-Proof Screws -COT3 No-Hub Cleanout Tee, 3”
-CO2 No-Hub Cleanout, 2” -COT4 No-Hub Cleanout Tee, 4”
-CO3 No-Hub Cleanout, 3” -COT6 No-Hub Cleanout Tee, 6”
-CO4 No-Hub Cleanout, 4”
SPECIFICATION
JOSAM 58630 Series square cast Nikaloy Access Frame with anchor lugs and satin
scoriated secured hinged cover.
Available Options
-2 Satin Finish Bronze Top -20 ** Raised Head Bronze Plug
-VP Secured Cover, Vandal-Proof -31 ** Galvanized Cast Iron Parts
Screws -COT2 No-Hub Cleanout Tee, 2”
-CO2 No-Hub Cleanout, 2” -COT3 No-Hub Cleanout Tee, 3”
-CO3 No-Hub Cleanout, 3” -COT4 No-Hub Cleanout Tee, 4”
-CO4 No-Hub Cleanout, 4” -COT6 No-Hub Cleanout Tee, 6
-CO6 No-Hub Cleanout, 6”
199
Cleanouts_08.qxd 5/2/08 12:59 PM Page 200
CLEANOUTS
58640 SERIES WALL OR FLOOR ACCESS COVER
APPLICATION
For use in finished walls or floors subject to pedestrian or light wheel traffic, to pro-
vide access to cleanout plugs, valves, controls or other equipment where a square
cover complements construction or finish.
CLEANOUTS
SPECIFICATION
JOSAM 58640 Series square cast Nikaloy Access Frame with anchor lugs and satin
smooth secured cover.
Available Options
-2 Satin Finish Bronze Top -CO6 No-Hub Cleanout, 6”
-10 Scoriated Cover -20 ** Raised Head Bronze Plug
-VP Secured Cover, Vandal-Proof -31 ** Galvanized Cast Iron Parts
Screws -COT2 No-Hub Cleanout Tee, 2”
-CO2 No-Hub Cleanout, 2” -COT3 No-Hub Cleanout Tee, 3”
-CO3 No-Hub Cleanout, 3” -COT4 No-Hub Cleanout Tee, 4”
-CO4 No-Hub Cleanout, 4” -COT6 No-Hub Cleanout Tee, 6”
SPECIFICATION
JOSAM 58650 Series square stainless steel Access Frame with beveled edge, anchor
lugs and smooth, secured cover.
Available Options
-VP Secured Cover, -20 ** Raised Head Bronze Plug
Vandal-Proof Screws -31 ** Galvanized Cast Iron Parts
-CO2 No-Hub Cleanout, 2” -COT2 No-Hub Cleanout Tee, 2”
-CO3 No-Hub Cleanout, 3” -COT3 No-Hub Cleanout Tee, 3”
-CO4 No-Hub Cleanout, 4” -COT4 No-Hub Cleanout Tee, 4”
-CO6 No-Hub Cleanout, 6” -COT6 No-Hub Cleanout Tee, 6”
200
Cleanouts_08.qxd 3/27/08 10:54 AM Page 201
CLEANOUTS
58680 SERIES ACCESS COVER
APPLICATION
For use in finished or unfinished floors, inside or outdoors, subject to heavy wheel
traffic, such as parking lots, warehouses or industrial areas. To provide access to
cleanout plugs, valves, controls or other equipment.
CLEANOUTS
SPECIFICATION
JOSAM 58680 Series round coated cast iron Access Frame with anchor flanges and
heavy-duty scoriated secured cover.
Available Options
-5 Ductile Iron Cover
-VP Secured Cover, Vandal-Proof Screws
-26 Gasketed Cover
-31 Galvanized Cast Iron Parts
-CO2 No-Hub Cleanout, 2”
-CO3 No-Hub Cleanout, 3”
-CO4 No-Hub Cleanout, 4”
-CO6 No-Hub Cleanout, 6”
-20 Raised Head Bronze Plug
201
Cleanouts_08.qxd 3/27/08 10:54 AM Page 202
CLEANOUTS
58600-COT SERIES 58610-CO SERIES
CLEANOUTS
TYPE NO. PIPE SIZE B C D E F LBS. TYPE NO. PIPE SIZE B C E F LBS.
58604-COT2 2 4-1/4 1-3/4 6-3/8 2 5-3/8 11 58614-CO2 2 1-1/2 4-5/8 6 5-1/2 6
58604-COT3 3 5-1/4 2-1/2 7-3/4 3 5-3/8 14 58614-CO3 3 2-1/2 4-5/8 6 5-1/2 7
58604-COT4 4 6 3-1/2 8-7/8 4 5-3/8 20 58614-CO4 4 3-1/2 4-5/8 6 5-1/2 9
58608-COT6 6 7 4-1/2 12-1/2 6 10-5/8 34 58616-CO6 6 5-1/2 6-3/4 8-1/4 7-3/4 15
TYPE NO. PIPE SIZE B C D E F LBS. TYPE NO. PIPE SIZE B CXC LBS.
58614-COT2 2 4-1/4 1-3/4 6-3/8 2 6 13 58631-CO2 2 1-1/2 8x8 9
58614-COT3 3 5-1/4 3-1/2 7-3/4 3 6 16 58631-CO3 3 2-1/2 8x8 9
58614-COT4 4 6 3-1/2 8-7/8 4 6 22 58631-CO4 4 3-1/2 8x8 11
58616-COT6 6 7 4-1/2 12-1/2 6 8-1/4 37 58632-CO6 6 5-1/2 12 x 12 20
202
Cleanouts_08.qxd 3/27/08 10:54 AM Page 203
CLEANOUTS
58630-COT SERIES 58640-CO SERIES
CLEANOUTS
TYPE NO. PIPE SIZE B C D E FXF LBS. TYPE NO. PIPE SIZE B CXC LBS.
58631-COT2 2 4-1/4 1-3/4 6-3/8 2 8x8 16 58642-CO2 2 1-1/2 7x7 7
58631-COT3 3 5-1/4 2-1/2 7-3/4 3 8x8 19 58642-CO3 3 2-1/2 7x7 8
58631-COT4 4 6 3-1/2 8-7/8 4 8x8 25 58642-CO4 4 3-1/2 7x7 10
58632-COT6 6 7 4-1/2 12-1/2 6 12 x 12 42 58644-CO6 6 5-1/2 9x9 16
58640-COT SERIES
203
Cleanouts_08.qxd 3/27/08 10:54 AM Page 204
CLEANOUTS
58900 SERIES NO-HUB CLEANOUT FERRULE
APPLICATION
For use in unfinished areas not subject to traffic.
SPECIFICATION
JOSAM 58900 Series coated cast iron Cleanout Ferrule with no-hub connection and
CLEANOUTS
Available Options
-19 Plug Tapped for Center Screw
-20 Raised Head Bronze Plug
-31 Galvanized Cast Iron Parts
OUTLET:
-Z No-Hub Outlet
SPECIFICATION
JOSAM 58910 Series coated cast iron Cleanout Tee, no-hub connection and
bronze plug.
Available Options
-19 Plug Tapped for Center Screw
-20 Raised Head Bronze Plug
-31 Galvanized Cast Iron Parts
OUTLET:
-Z No-Hub Outlet
204
Interceptors_08.qxd 3/27/08 11:58 AM Page 205
GREASE INTERCEPTORS
Grease Interceptor Features
A grease interceptor is a plumbing device installed in the sanitary drainage system to intercept fats, oils and grease (FOG) from the waste water
discharge. It works by slowing the flow of water into the interceptor, which allows the FOG time to separate from the waste water. The FOG is
contained in the body of the interceptor allowing the FOG-free water to pass downstream by exiting the interceptor via a trap leg. Hydro-mechanical
grease interceptors range in size from small 7 GPM units to large 500 GPM units. Units with installed grease removal devices are self-cleaning.
For maximum grease efficiency JOSAM provides an external flow control with every interceptor which must be used as directed.
GRDP OPTION
INTERCEPTORS
includes the sensing
and alarm probe which TIMER/CONTROLLER
enables the use of the Wall-mounted Programmable Timer
probe as the primary activates evacuation pump at pre-
source of sensing with determined time (1-99 Days).
the timer as a back-up
system.
GREASE REMOVAL PUMP
evacuates contained grease
regardless of temperature.
REMOVABLE BAFFLE
205
Interceptors_08.qxd 3/27/08 11:58 AM Page 206
INTERCEPTORS
Selection Checklist
This checklist of interceptors is provided as a guide to selection of the proper type interceptor to control specific waste materials. First determine the waste material to be
controlled, then follow the check marks for the types of interceptors recommended.
TYPES OF INTERCEPTORS
OIL
GREASE INTERCEPTORS SEPARATORS
TYPE OF SOLIDS INTERCEPTORS
SEMI-
WASTE AUTOMATIC AUTOMATIC MANUAL AUTOMATIC
MATERIAL
60100H-GRD
60100-SA-RT
60100-SA-ET
60100H-EXT
60210A-EXT
60610A-EXT
60500B-EXT
60100H-RT
60100H-ET
60500-EST
60610-EST
60100-SA
60110-SA
INTERCEPTORS
60300A
60100H
60115A
60117A
60210A
60610A
60500B
60810
61000
61030
61040
61070
61080
61800
Barium P P
Benzine P P P P P P
Cheese P P P P P P P P P P P P P P
Cutting Oils P P P P P P
Elemental Mercury* P
Fats P P P P P P P P P P P P P P
Gasoline P P P P P P
Gauze P P P
Glass Grindings P
Gravel P P P P
Grease P P P P P P P P P P P P P P
Hair P P P P
Jewels P P P
Kerosene P P P P P
Lint P P P P P
Lubricating Oil P P P P P P
Naphtha P P P P P P
Oil P P P P P P
Oil Sludge P
Paraffin P P P P P P P P P P
Plaster P P
Precious Metals P P P
Quench Oil P P P P P P
Rouge P
Rubber Grindings P
Sand P P P P
Sediment P P P P
Wax P P P P P P P P P P
*Cast Iron Interceptor Only
How to Order
Select Type Number from Dimension Table and use suffix numbers to indicate options.
EXAMPLE: Series No. 60100H Type No. 6010
60106H -EXT -ISI
Type No.
Option, Integral Extension
Option, Integrated Solids Interceptor
HOW TO ORDER INTERCEPTORS WITH EXTENDED TOPS
When ordering extensions for Grease and Oil Interceptors (-EXT), specify dimension from the pipe centerline to finished floor.
206
Interceptors_08.qxd 3/27/08 11:58 AM Page 207
GREASE INTERCEPTORS
Selection Table
RATING INLET & OUTLET RATING INLET & OUTLET
TYPE NO. IN G.P.M. SIZE (INCHES) TYPE NO. IN G.P.M. SIZE (INCHES)
INTERCEPTORS
60310A 100 4 60106H, -EXT, -RT, -ET 25 3
60115-SA 35 3
EGOLD-1000
CEGOLD-2000
-SAP
Sizing
Consult PDI-G101 or ASME A112.14.3 Standards or your local codes.
207
Interceptors_08.qxd 3/27/08 11:58 AM Page 208
MANUAL CLEANING
INTERCEPTORS
SEMI-AUTOMATIC CLEANING
60100-SA 60100-SA-ET 60100-SA-RT 60115-SA
On-Floor Type Enclosed Type Recessed Type Low Boy
Page 219 Page 211 Page 220 Page 220 Page 217
208
Interceptors_08.qxd 3/27/08 11:58 AM Page 209
OIL SEPARATORS
INTERCEPTORS
60610A 60610A-EXT 60610-EST
High Volume, Draw-Off Type High Volume, Extended Top, Draw-Off Type High Volume with External Storage Tank
SOLIDS INTERCEPTORS
61000 61030 61040A 61070 61080
Barber Shop Type, Bottom Access Jewelry Shop Type, Top Access 18" x 18" Top Access 10-1/2" Top 16-1/2” Top
Top Access
209
Interceptors_08.qxd 3/27/08 11:58 AM Page 210
GREASE INTERCEPTORS
Typical Installations
The typical illustrations shown below are suggested ways of installing various types of JOSAM Interceptors. All installations are subject to
government and local code requirements.
INTERCEPTORS
60100H Series Interceptor on floor, servicing a sink. 60110-SA Series Semi-Automatic shallow Interceptor installed on
floor, servicing a double compartment sink and dishwasher.
60100-SA-RT Series Semi-Automatic Interceptor recessed flush with 60210A-EXT Series Interceptor recessed flush with floor, servicing a
floor, servicing a dishwasher. sink and an additional fixture.
NOTE: Install air intake from flow control to outside of building and terminate with elbow, turned down or intersect a local vent or vent stack without trap if permitted
by code. Top of air intake from flow control should not be lower than rim of fixture.
210
Interceptors_08.qxd 5/2/08 3:02 PM Page 211
GREASE INTERCEPTORS
60100H SERIES MANUAL CLEANING, ON-FLOOR TYPE
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Adequate
space and head room for removal of cover must be available for manual cleaning.
SPECIFICATION
JOSAM 60100H Series epoxy coated fabricated steel Grease Interceptor, no-hub connec-
tions, internal trap, removable diffuser baffle, gasketed non-skid cover, flow control fitting
and PDI Seal of Approval. Conforms to Plumbing & Drainage Institute Standard PDI-G101.
Available Options
-40 Cover Recess for Floor Finish -HD Heavy-Duty Cover
-61 Flange and Clamp Device -SS Stainless Steel Interceptor
* -ISI Integrated Solids Interceptor ▼ -GRD* Grease Removal Device,
▼ -EXT Extension, 6” Standard. 60104H-60110H
INTERCEPTORS
(Specify Extension Height) † -GRDP Grease Recovery Device
▼ -RT Recessed Type with Probe
▼ -ET Enclosed Type -SAP Sensing and Alarm Probe
* -ISI and -GRD cannot be furnished together. † 60100H-GRDP meets ANSI A112.14.4
FLOW GREASE ROUGH-IN
TYPE RATE CAP PIPE CENTERS LGTH. WIDTH HGT.
NO. GPM LBS. SIZE C D E F G LBS.
60102H 7 14 2 8-1/4 3-3/8 14-7/8 13 11-5/8 35
60103H 10 20 2 8-1/2 3-3/8 16-5/8 14-1/2 11-7/8 45
60104H 15 30 2 9-1/2 3-3/8 20-3/8 17 12-7/8 60
60105H 20 40 3 12 4-7/8 20-7/8 19 16-7/8 70
60106H 25 50 3 13 4-7/8 23-3/8 21-1/2 17-7/8 90
60107H 35 70 3 14-1/2 4-7/8 26-1/8 23 19-3/8 110
60108H 50 100 3 16-1/2 4-7/8 27-7/8 25-1/2 21-3/8 135
60109H 75 150 3 21 6 41 31 27 220
60110H 100 200 4 23 8 47 35 31 325
SPECIFICATION
JOSAM 60100H-GRD Series epoxy coated fabricated steel Grease Interceptor, no-hub
connections, internal trap, removable baffle, gasketed non-skid cover, flow control fit-
ting and PDI Seal of Approval. Programmable timer controls internal pump for
removal of grease at predetermined intervals.
OPTION N/A:
-ISI
GREASE INTERCEPTORS
60100H-EXT SERIES with Extension
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Extended
top with fixed extension for installations requiring additional roughing depth from
the cover of the interceptor to the inlet and outlet.
SPECIFICATION
JOSAM 60100H-EXT Series epoxy coated fabricated steel Grease Interceptor, deep
roughing, integral extension, flush-with-floor type, no-hub connections, internal trap,
removable diffuser baffle, gasketed non-skid cover, flow control fitting and PDI Seal
of Approval.
ROUGH-IN
FLOW GREASE CENTERS
TYPE RATE CAP PIPE LGTH. WIDTH HGT.
NO. GPM LBS. SIZE C D♦ E F G LBS.
60102H-EXT 7 14 2 8-1/4 9-3/8 14-7/8 13 17-5/8 35
60103H-EXT 10 20 2 8-1/2 9-3/8 16-5/8 14-1/2 17-7/8 45
60104H-EXT 15 30 2 9-1/2 9-3/8 20-3/8 17 18-7/8 60
60105H-EXT 20 40 3 12 10-7/8 20-7/8 19 22-7/8 70
60106H-EXT 25 50 3 13 10-7/8 23-3/8 21-1/2 23-7/8 90
60107H-EXT 35 70 3 14-1/2 10-7/8 26-1/8 23 25-3/8 110
60108H-EXT 50 100 3 16-1/2 10-7/8 27-7/8 25-1/2 27-3/8 135
60109H-EXT 75 150 3 21 12 41 31 33 220 ♦ DIMENSIONS BASED ON STD. 6" EXTENSION.
60110H-EXT 100 200 4 23 14 47 35 37 325
SPECIFICATION
JOSAM 60100H-ET Series epoxy coated fabricated steel Grease Interceptor, deep
roughing, flush-with-floor type, no-hub connections, internal trap, removable diffuser
baffle, gasketed non-skid cover, flow control fitting, PDI Seal of Approval and steel
enclosure cabinet with non-skid cover and adjustable interceptor carrier brackets.
212
Interceptors_08.qxd 5/2/08 4:26 PM Page 213
GREASE INTERCEPTORS
60100H-RT SERIES Recessed Type
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Steel frame
and cover for installation flush with the floor where adjustment of interceptor eleva-
tion is necessary for connection to a deep drain line.
SPECIFICATION
JOSAM 60100H-RT Series epoxy coated fabricated steel Grease Interceptor, deep
roughing, recessed, flush-with-floor type, no-hub connections, internal trap, removable
diffuser baffle, gasketed non-skid cover, flow control fitting, PDI Seal of Approval and
steel frame with non-skid cover and adjustable interceptor carrier brackets.
INTERCEPTORS
FLOW GREASE ROUGH-IN INTER. ENCL.
TYPE RATE CAP PIPE WIDTH CENTERS LGTH. LGTH. HGT.
NO. GPM LBS. SIZE B C D♦ E F G LBS.
60102H-RT 7 14 2 15 8-1/4 8-3/4 14-7/8 19 14-3/4 102
60103H-RT 10 20 2 16-3/8 8-1/2 8-3/4 16-5/8 21 14-3/4 120
60104H-RT 15 30 2 18-1/2 9-1/2 8-3/4 20-3/8 24 14-3/4 151
60105H-RT 20 40 3 20-1/4 12 10-1/4 20-7/8 26 14-3/4 175
60106H-RT 25 50 3 22-1/2 13 10-1/4 23-3/8 29 14-7/8 197 ♦ BASED ON INTERCEPTOR IN POSITION #1, ADD 1-1/4" WHEN LOWERING INTERCEPTOR
60107H-RT 35 70 3 24 14-1/2 10-1/4 26-1/8 31 14-7/8 225 TO SUCCEEDING POSITIONS.
60108H-RT 50 100 3 26-5/8 16-1/2 10-1/4 27-7/8 33 14-7/8 258
INTERCEPTOR SUPPORT BRACKET ADJUSTABLE FOR VARYING DEPTHS OF FLOOR
60109H-RT 75 150 3 33 21 11-3/8 41 49-1/8 15-3/4 455
CONSTRUCTION.
60110H-RT 100 200 4 37 23 13-3/8 47 55-1/8 15-3/4 625
213
Interceptors_08.qxd 5/2/08 3:02 PM Page 214
GREASE INTERCEPTORS
60100-SA SERIES SEMI-AUTOMATIC
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Semi-auto-
matic draw-off allows for easy odor and mess free grease removal without opening
the cover.
SPECIFICATION
JOSAM 60100-SA Series epoxy coated fabricated steel Grease Interceptor with
threaded connections, internal air relief, visible double wall trap, removable baffle,
gasketed non-skid cover, grease recovery cone, flexible hose, grease draw-off valve
and flow control fitting.
Available Options
• -62 4” Inlet and Outlet Available ▼ -ET Enclosed Type
on Std. 3” Sizes ▼ -RT Recessed Type
-65 Hub Inlet, Spigot Outlet, 2”
INTERCEPTORS
GREASE INTERCEPTORS
60100-SA-ET SERIES Enclosed Type
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Semi-auto-
matic draw-off allows for easy odor and mess free grease removal without opening
the cover. Steel enclosure cabinet for installation flush with the floor, completely
encased, where adjustment of interceptor elevation is necessary for connection to a
deep drain line.
SPECIFICATION
JOSAM 60100-SA-ET Series epoxy coated fabricated steel semi-automatic Grease
Interceptor with threaded connections, internal air relief, visible double wall trap,
removable baffle, gasketed cover, grease recovery cone, flexible hose and grease
draw-off valve, flow control fitting and steel enclosure cabinet with non-skid cover
and adjustable interceptor carrier brackets.
INTERCEPTORS
FLOW GREASE ROUGH-IN
TYPE RATE CAP PIPE WIDTH CENTERS LGTH. HGT.
NO. GPM LBS. SIZE B C D♦ E F G LBS.
60102-SA-ET 7 14 2 11 7-3/8 7-5/8 20-7/16 27-1/2 24-5/8 136
60103-SA-ET 10 20 2 12-5/8 8-3/8 8-1/4 22-1/16 29 25-7/8 177 NOTE: HGT. OF 13" REQUIRED FROM TOP OF INTERCEPTOR TO BOTTOM OF FIXTURE.
60104-SA-ET 15 30 2 14-1/4 9-3/8 9-3/8 24-3/16 31-1/4 27-1/8 216
60105-SA-ET 20 40 2 16 11-1/2 10 26-15/16 34 29-1/8 289
♦ BASED ON INTERCEPTOR IN POSITION #1, ADD 1-1/4" WHEN
LOWERING INTERCEPTOR TO SUCCEEDING POSITIONS.
60106-SA-ET 25 50 3• 17-1/2 13 9-3/4 32 38 31-1/2 360
INTERCEPTOR SUPPORT BRACKET ADJUSTABLE FOR VARYING DEPTHS
60107-SA-ET 35 70 3• 18-1/2 14-1/2 9-3/8 33-5/8 39-1/2 32-5/8 389
OF FLOOR CONSTRUCTION.
60108-SA-ET 50 100 3• 20-1/4 15-1/2 10-1/4 37-1/4 43-1/8 34-5/8 491
SPECIFICATION
JOSAM 60100-SA-RT Series epoxy coated fabricated steel semi-automatic Grease
Interceptor with acid-resisting coating, deep roughing flush-with-floor type, threaded
connections, flat bottom, internal air relief, visible double wall trap, removable baf-
fle, gasketed non-skid cover, grease recovery cone, flexible hose and grease draw-off
valve, flow control fitting and steel frame with non-skid cover and adjustable inter-
ceptor carrier brackets.
215
Interceptors_08.qxd 5/2/08 3:02 PM Page 216
GREASE INTERCEPTORS
60115A/60117A SERIES MANUAL CLEANING, LOW TYPE
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG). Adequate
space and head room for removal of cover must be available for manual cleaning.
Low profile interceptor designed to fit on the floor under equipment in a limited space.
SPECIFICATION
JOSAM 60115A/60117A Series epoxy coated fabricated steel Grease Interceptor,
shallow on-floor type, threaded connections, internal air relief, visible double wall
trap, removable baffle, gasketed non-skid cover and flow control fitting.
Available Options
-65 Hub Inlet, Spigot Outlet, 2”
-66 Hub Inlet, Spigot Outlet, 3”
• -68 3” Inlet and Outlet Available on Standard 2” Size
INTERCEPTORS
FLOW GREASE
TYPE RATE CAP. PIPE
NO. GPM LBS. SIZE D E F G H LBS.
60115A 20 40 2• 3-1/2 36-3/8 22-5/8 10-1/2 31-5/8 109
60117A 35 70 3 4-1/2 47-3/4 28-5/8 11-1/2 42-5/8 165
SPECIFICATION
JOSAM 60115-SA Series epoxy coated fabricated steel Grease Interceptor, shallow on-
floor type, threaded connections, internal air relief, visible double wall trap, removable
baffle, gasketed non-skid cover, grease recovery cone, flexible hose, grease draw-off
valve and flow control fitting.
Available Options
-65 Hub Inlet, Spigot Outlet, 2”
-66 Hub Inlet, Spigot Outlet, 3”
216
Interceptors_08.qxd 3/27/08 11:58 AM Page 217
GREASE INTERCEPTORS
60210A SERIES MANUAL CLEANING TYPE
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains fats, oil and grease (FOG).
SPECIFICATION
JOSAM 60210A Series epoxy coated fabricated steel Grease Interceptor, high volume,
threaded connections, internal air relief, visible double wall trap, removable baffle,
gasketed non-skid cover and flow control fitting.
Available Options
▼ -EXT Extension, 6” Standard. (Specify Extension Height)
-60 Anchor Flange
-61 Flange and Clamp Device
▼ -ISI Integrated Solids Interceptor
-HD Heavy-Duty Cover
INTERCEPTORS
-SAP Sensing and Alarm Probe
ROUGH-IN
FLOW GREASE
TYPE RATE CAP PIPE CENTERS LGTH. WIDTH HGT. COVER
NO. GPM LBS. SIZE C D E F G H LBS.
60213A 150 300 4 27 8 60 39 35 53 725
60214A 200 400 5 31-1/2 10 67 42 41-1/2 58 1150
60215A 250 500 5 35-1/2 10 72 46 45-1/2 63 1425
60216A 350 700 6 39-1/2 12 80 52 51-1/2 71 1800
* 60213A FURNISHED WITH ONE-PIECE COVER.
60217A 500 1000 6 43-1/2 12 91 59 55-1/2 82 2300
SPECIFICATION
JOSAM 60210A-SAP Series epoxy coated fabricated steel Grease Interceptor, high vol-
ume, threaded connections, internal air relief, visible double wall trap, removable baf-
fle, gasketed non-skid cover, flow control fitting and factory installed wireless Sensing
and Alarm Probe (SAP) assembly. Wall-mounted controller is battery powered by a UL
listed 9VDC transformer and has L.E.D. indicators with audible alarm and permanent
memory. Probe assembly is mounted to a bracket for precise placement ensuring accu-
rate and reliable readings and transmits to controller via a wireless signal.
ROUGH-IN
FLOW GREASE
TYPE RATE CAP PIPE CENTERS LGTH. WIDTH HGT. COVER
NO. GPM LBS. SIZE C D E F G H LBS.
60213A-SAP 150 300 4 27 8 60 39 35 53 727
60214A-SAP 200 400 5 31-1/2 10 67 42 41-1/2 58 1152
60215A-SAP 250 500 5 35-1/2 10 72 46 45-1/2 63 1427
60216A-SAP 350 700 6 39-1/2 12 80 52 51-1/2 71 1802
* 60213A-SAP FURNISHED WITH ONE-PIECE COVER.
60217A-SAP 500 1000 6 43-1/2 12 91 59 55-1/2 82 2302
GREASE INTERCEPTORS
60210A-EXT SERIES with Extension
APPLICATION
For use in large restaurant and institutional kitchens and all types of food handling
and processing areas where waste water contains large amounts of fats, oil and
grease (FOG). Extended top with fixed extension for installations requiring additional
roughing depth from the cover of the interceptor to the inlet and outlet.
SPECIFICATION
JOSAM 60210A-EXT Series epoxy coated fabricated steel Grease Interceptor, high volume,
deep roughing, integral extension, threaded connections, internal air relief, visible double
wall trap, removable baffle, gasketed non-skid cover and flow control fitting.
INTERCEPTORS
ROUGH-IN
FLOW GREASE
TYPE RATE CAP PIPE CENTERS LGTH. WIDTH HGT. COVER
NO. GPM LBS. SIZE C D♦ E F G♦ H LBS.
60213A-EXT 150 300 4 27 14 60 39 41 53 935
60214A-EXT 200 400 5 31-1/2 16 67 42 47-1/2 58 1150
60215A-EXT 250 500 5 35-1/2 16 72 46 51-1/2 63 1425 ♦ DIMENSIONS BASED ON STD. 6" EXTENSION
60216A-EXT 350 700 6 39-1/2 18 80 52 57-1/2 71 1800
* 60213A-EXT FURNISHED WITH ONE-PIECE COVER.
60217A-EXT 500 1000 6 43-1/2 18 91 59 61-1/2 82 2300
SPECIFICATION
JOSAM 60210A-ISI Series epoxy coated fabricated steel Grease Interceptor, high volume,
threaded connections, internal air relief, visible double wall trap, integrated solids inter-
ceptor, gasketed non-skid cover and flow control fitting.
ROUGH-IN
FLOW GREASE
TYPE RATE CAP PIPE CENTERS LGTH. WIDTH HGT. COVER
NO. GPM LBS. SIZE C D E F G H LBS.
60213A-ISI 150 300 4 27 8 60 39 35 53 975
60214A-ISI 200 400 5 31-1/2 10 67 42 41-1/2 58 1200
60215A-ISI 250 500 5 35-1/2 10 72 46 45-1/2 63 1475
60216A-ISI 350 700 6 39-1/2 12 80 52 51-1/2 71 1850
* 60213A-ISI FURNISHED WITH ONE-PIECE COVER.
60217A-ISI 500 1000 6 43-1/2 12 91 59 55-1/2 82 2400
218
Interceptors_08.qxd 5/2/08 3:02 PM Page 219
GREASE INTERCEPTORS
60300A SERIES GI 2000A AUTOMATIC GREASE RECOVERY DEVICE
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and
processing areas where waste water contains, fats, oil and grease (FOG).
SPECIFICATION
JOSAM 60300A Series fully automatic Grease Recovery Device (GRD) is constructed of 304
grade stainless steel with supplemental solids interceptor, removable basket, stainless steel
draw latches, non-adhesive “U” channel gasket, 55 gallon polypropylene reclaim tank with
alarm and pump, may be floor mounted, partially recessed, or below grade in vaulted
enclosure and is capable of measuring grease, heating congealed grease, and transferring
grease via pump to a remote reclaim tank. The data is then sent to a Nema encased con-
troller with an LCD display and LED indicators to provide current system status. The micro-
processor records and displays clean cycles on a daily, weekly, monthly and yearly basis.
Available Options
-23 Remote Monitoring Package
INTERCEPTORS
(-23 A) Monitoring Plan
(-23 B) Monitoring Plan
(-23 C) Monitoring Plan
-24 Extended Warranty Package
-33 55-Gallon Stainless Steel Reclaim Tank
-34 55-Gallon Steel Reclaim Tank
FLOW GREASE
TYPE RATE CAP PIPE
NO. GPM LBS. SIZE A B C D E F G LBS.
60306A 25 50 3 24-3/8 9 3-1/2 16 35-1/2 25-5/8 11 220
60307A 35 70 3 24-3/8 9 3-1/2 20 40-5/8 31-1/2 15-1/2 340
60308A 50 100 3 25-7/8 9 3-1/2 22-1/2 42-3/8 33 17-1/2 425
60309A 75 150 4 25-7/8 9 3-1/2 26 56-1/8 46-3/4 21-1/2 700
60310A• 100 200 4 35 9 3-1/2 31 67-1/2 58 23 800
60311A• 150 300 4 39 9 3-1/2 35 73-3/4 64 27 1100
55-GAL. RECLAIM TANK NOT SHOWN
60312A• 200 400 6 43 9 3-1/2 41 80-3/4 71 31-1/2 1250
* RECOMMENDED CLEARANCES
60313A• 250 500 6 47 9 3-1/2 44-3/4 85-3/4 76 35-1/2 1400
• INCLUDES EXTERNAL MACERATING PUMP
60314A• 350 700 6 47 9 3-1/2 48 105-1/2 96 39-1/2 1525
** UTILIZES TWO PUMPS & RECLAIM TANKS
60315A** 500 1000 6 47 9 3-1/2 51 130-7/8 120 44 1650
219
Interceptors_08.qxd 5/2/08 3:02 PM Page 220
GREASE INTERCEPTORS
EGOLD-1000 SERIES ELECTRONIC GREASE/OIL LEVEL DETECTOR
APPLICATION
For use in restaurant and institutional kitchens and all types of food handling and pro-
cessing areas where waste water contains fats, oil and grease (FOG). Additionally, can
be used in service stations, parking garages, car and truck washes and industrial plants
where discharge water contains oil. Can be used on most manufacturers’ manual or
semi-automatic grease and oil interceptors to monitor and alert facility personnel
when interceptor cleaning is required.
SPECIFICATION
JOSAM EGOLD-1000 Series Electronic Grease/Oil Level Detector with wall-mounted
controller, is powered by a UL listed 9 VDC transformer and has L.E.D. indicators with
audible alarm and permanent memory. The probe assembly is mounted to a bracket
for precise placement ensuring accurate and reliable readings.
Available Options
-23 Remote Monitoring Package
INTERCEPTORS
SPECIFICATION
JOSAM CEGOLD-2000 Series Electronic Grease/Oil Level Detector with wall-mounted
controller, is powered by a UL listed 9 VDC transformer and has L.E.D. indicators with
audible alarm and permanent memory. The telescoping stainless steel probe assembly
is mounted with brackets on side of interceptor to ensure ease of installation and
removal for maintenance.
Available Options
-23 Remote Monitoring Package
(-23 A) Monitoring Plan
(-23 B) Monitoring Plan
(-23 C) Monitoring Plan
220
Interceptors_08.qxd 3/27/08 11:58 AM Page 221
One of the flow control fittings illustrated on this page will be shipped with
every JOSAM Grease Interceptor or Oil Separator. They were designed after
many years of tests and field experiments with interceptor installations under
varying conditions and ensure 90% or more grease or oil retention efficiency
of the interceptor.
When consideration isn’t given to the flow rate of the waste water to be han-
dled, generally the actual flow rate through the interceptor or separator
exceeds its rated maximum. With such flow rate, the interceptor or separator
INTERCEPTORS
would be overloaded. Retention time within the unit would not be sufficient
for maximum separation. The result would be low efficiency and pollutants
left in the waste water would pass through the interceptor or separator mak- Two Bronze Plugs Furnished for unused
Inlet & Outlet to serve as Cleanouts
ing the installation less than effective. When the flow is controlled by use of a
JOSAM flow control fitting so that it can never exceed the maximum rating of 60710 TYPE
the interceptor or separator, and the unit is cleaned on a regular basis, the
maximum pollutant retention efficiency will be achieved and maintained.
All flow controls are provided with an air intake and should be connected to
vent stack or vent not lower than the flow level of highest drain serviced or
terminated in a return bend at the same elevation outside of building.
60732 TYPE
Interceptor/Separator–Flow Control
This table indicates which series flow control is furnished with the JOSAM
interceptors or separators shown.
FLOW CONTROLS
Flow Control Flow Control Flow Control
Series Series Series Series Series Series
60100-SA 60730 60110A 60730 60210A* 60710
60110-SA 60730 60100H-EXT 60740 60500B 60740
60100-SA-RT 60730 60100H-RT 60740 60500B-EXT 60740 60733 & 60734 TYPE
60100-SA-ET 60730 60100H-ET 60740 60610-EXT* 60710
60100H 60740 60210A-EXT* 60710 60610A* 60710
* All interceptors or separators in this series with a flow rate of 150 G.P.M. or less are shipped with a 60733 & 60734
Type Flow Control.
DIMENSIONS IN INCHES
Type A B C D E F G H J K LBS.
60712 2 1-1/4 2-1/2 2 1-1/8 2 3-1/4 3-3/8 6-1/2 3 7
60713 3 1-1/2 3 2-7/8 1-3/8 2-3/4 4-1/8 4-1/2 8-5/8 4-1/4 14
A B
60714 4 2-1/2 3-3/4 4-1/8 1-7/8 4-1/4 6-1/2 6-7/8 12 6-7/8 52 60742 2-3/8 2
60715 5 2-1/2 3-3/4 4-1/8 1-7/8 4-1/4 6-1/2 6-7/8 12 6-7/8 54 60743 3-3/8 2-1/2
60716 6 3 4-3/8 5-1/8 2-1/8 4-3/4 7-7/8 8 14-1/4 8 85 60742 & 60743 TYPE
221
Interceptors_08.qxd 3/27/08 11:58 AM Page 222
OIL SEPARATORS
Features
AN IMPORTANT STEP IN PREVENTING POLLUTION FOR COMMERCIAL AND INDUSTRIAL SERVICE
JOSAM Oil Separators solve the majority of oil and hazardous waste interception and handling problems at the source. Years of research, experimentation and actual field experience
have been applied by JOSAM to the design and development of the oil separators covered in this section. The paramount objective of an oil separator is to intercept and separate oils
from wastewater, and after this has been accomplished, to provide an efficient means of directing the intercepted materials to storage and disposal facilities. JOSAM Oil Separators do
just that with 90% plus retention efficiency. Features of the 60500B and 60610A Series are covered below. The same features with the addition of extended tops are available with
the -EXT option.
SECURED COVER
White epoxy coating, gasketed air and
watertight bolted non-skid safety pattern top.
INTERCEPTORS
BODY
60500B Series Shown Steel with white epoxy coating
AIR INTAKE OR VENT inside and outside.
INLET
OUTLET
FLOW CONTROL
Maximum oil separation efficiency
depends upon the proper rate of flow
through the separator. The flow control
regulates flow velocity to prevent taxing
the separator beyond its rated capacity
and ensures 90% or more retention effi- INTERNAL TRAP LEG
ciency. A flow control fitting is furnished (not shown)
with each JOSAM Oil Separator and must Internal Trap Leg reduces installation
be used as directed. space requirements and allows
cleanout access through the removal
of the cover
JOSAM Oil Separators are produced in steel to rigid specifications with strict quality control.
222
Interceptors_08.qxd 3/27/08 11:58 AM Page 223
OIL SEPARATORS
Sizing and Selection
INTERCEPTORS
60506B, 60506B-EXT, 60506-EST 25 3
223
Interceptors_08.qxd 3/27/08 11:58 AM Page 224
OIL SEPARATORS
Typical Installations
Installations and diagrams below show various components and suggested methods used when installing JOSAM Oil Separators.
All installations are subject to government and local code requirements.
GRAVITY DRAW-OFF
Every JOSAM Oil Separator is equipped with an internal
gravity draw-off assembly having an adjustable skimmer
tube and a threaded pipe connection through the side wall
of separator body. This assembly can be mounted on either
side to accommodate installation requirements. The piping
to oil storage tank is connected to the draw-off. Typical
installations are shown below.
INTERCEPTORS
Typical arrangement of separator, draw-off piping, venting and Oil separator recessed flush with floor, servicing a floor drain. Flow
oil storage facility. control is installed with cleanouts to facilitate servicing.
Oil separator and flow control installed in pit, servicing a battery of floor drains.
224
Interceptors_08.qxd 5/2/08 4:26 PM Page 225
OIL SEPARATORS
60500B SERIES DRAW-OFF, GRAVITY TYPE
APPLICATION
For use in service stations, parking garages, car and truck washes and industrial
plants where discharged water contains oil, sediment and other volatile liquids.
Separator collects oil and conveniently permits the collected oil to be drained to a
storage tank by means of an adjustable gravity draw-off connection. Sediment and
debris are collected in a sediment bucket that can be periodically removed.
SPECIFICATION
JOSAM 60500B Series fabricated steel Oil Separator, epoxy coated inside and outside,
threaded connections, internal trap, sediment bucket, two vent connections on each
side, gasketed non-skid cover and flow control fitting.
Available Options
▼ -EXT Extension, 6” Standard (Specify Extension Height)
-60 Anchor Flange
-61 Flange and Clamp Device
INTERCEPTORS
-HD Heavy-Duty Cover
SPECIFICATION
JOSAM 60500B-EXT Series fabricated steel Oil Separator, epoxy coated inside and
outside, threaded connections, deep roughing, integral extension, internal trap,
sediment bucket, two vent connections on each side, gasketed non-skid cover and
flow control fitting.
OIL SEPARATORS
60500-EST SERIES with External Storage Tank
APPLICATION
For use in service stations, parking garages, car and truck washes, industrial plants and
elevator pits where discharged water contains oil, sediment and other volatile liquids.
Separator collects oil and conveniently permits the collected oil to be drained directly
to the integral storage tank by means of an adjustable gravity draw-off connection.
Sediment and debris are collected in a sediment bucket that can be periodically removed.
SPECIFICATION
JOSAM 60500-EST Series fabricated Oil Separator, epoxy coated inside and outside,
flush-with-floor type with oil storage tank, threaded connections, flat bottom, visible
double-wall trap, sediment bucket, gasketed cover, check valve and flow control fitting.
Available Options
-EXT Extension, 8” Standard, Specify Extension Height
-HD Heavy-Duty Cover
-19 Reclaim Tank Alarm
INTERCEPTORS
TYPE G H L M N P Q S V
226
Interceptors_08.qxd 3/27/08 11:59 AM Page 227
OIL SEPARATORS
60610A SERIES DRAW-OFF TYPE
APPLICATION
For use in large service stations, parking garages, car and truck washes and industrial
plants where discharged water contains high volumes of waste laden with oil, sedi-
ment and other volatile liquids. Separator collects oil and conveniently permits the
collected oil to be drained to a storage tank by means of an adjustable gravity draw-
off connection. Sediment and debris are collected in a sediment bucket that can be
periodically removed.
SPECIFICATION
JOSAM 60610A Series fabricated steel Oil Separator, epoxy coated inside and outside,
high volume, threaded connections, visible double wall trap and sediment bucket,
adjustable gravity draw-off either side, two vent connections on each side, gasketed
non-skid cover and flow control fitting.
Available Options
▼ -EXT Extension, 6” Standard (Specify Extension Height)
INTERCEPTORS
-60 Anchor Flange
-61 Flange and Clamp Device
-HD Heavy-Duty Cover
SPECIFICATION
JOSAM 60610A-EXT Series fabricated steel Oil Separator, epoxy coated inside and
outside, high volume, deep roughing, integral extension, threaded connections, visible
double wall trap, sediment bucket, adjustable gravity draw-off either side, two vent
connections on each side, gasketed non-skid cover and flow control fitting.
OIL SEPARATORS
60610-EST SERIES with External Storage Tank
APPLICATION
For use in service stations, parking garages, car and truck washes, industrial plants and
elevator pits where discharged water contains high volumes of waste laden with oil, sedi-
ment and other volatile liquids. Separator collects oil and conveniently permits the col-
lected oil to be drained directly to the integral storage tank by means of an adjustable
gravity draw-off connection. Sediment and debris are collected in a sediment bucket that
can be periodically removed.
SPECIFICATION
JOSAM 60610-EST Series fabricated Oil Separator, epoxy coated inside and outside,
flush-with-floor type with oil storage tank, threaded connections, flat bottom, visible
double-wall trap, sediment bucket, gasketed cover, check valve and flow control fitting.
Available Options
-EXT Extension, 8” Standard, Specify Extension Height
-HD Heavy-Duty Cover
INTERCEPTORS
228
Interceptors_08.qxd 3/27/08 11:59 AM Page 229
OIL SEPARATORS
60810 SERIES OIL SEDIMENT INTERCEPTOR
APPLICATION SLOT WIDTH 1/2”
For use in service stations, parking garages, car and truck washes and industrial plants
where discharged water contains oil, sediment and other volatile liquids. Sediment and
debris are collected in the sediment pan and removable bucket, which are accessible by
removing the top grate. Oil and grease are trapped in the unit and may be skimmed off
periodically.
SPECIFICATION
JOSAM 60810 Series steel Oil Sediment Interceptor with acid-resisting coating, threaded
connection, flat bottom, visible double wall trap, removable sediment bucket, primary
and secondary screens and medium-duty cast iron grate(s).
INTERCEPTORS
GRATE
FREE SLUDGE
TYPE PIPE AREA NO. OF CAP
NO. SIZE (SQ. IN.) GRATES (LBS.) E F G H LBS.
60816 2 54 1 12 17-1/2 12-1/8 15 12-1/8 60
60817 4 112 1 60 29-7/8 12-1/2 25 24-1/2 175
60818 4 224 2 100 29-7/8 24-1/2 25 24-1/2 280
60819 4 336 3 200 41-7/8 24-1/2 35 36-1/2 360
229
Interceptors_08.qxd 5/2/08 3:04 PM Page 230
SOLIDS INTERCEPTORS
61000 SERIES BOTTOM ACCESS FIXTURE TRAP TYPE
APPLICATION
For use on the lavatory or sink in barber shops, beauty salons, dormitories and motels
where hair, lint and other solids are commonly encountered. May also serve as a
means of retrieving rings, other valuables or dental grindings, which have been
dropped into the sink or lavatory. Cleaning is accomplished by removal of bottom
cover and basket.
SPECIFICATION
JOSAM 61000 Series Nikaloy Solids Interceptor, bottom access, fixture trap type, slip
joint inlet, 1-1/2" threaded side outlet, gasketed cover and removable perforated
stainless steel basket.
Available Options
-1 Painted Cast Iron
-3 Polished Bronze
-30 Acid-Resisting C.I. Inside and Outside
INTERCEPTORS
SPECIFICATION
JOSAM 61030 Series coated cast iron Solids Interceptor, top access, fixture trap type,
threaded connections, gasketed cover, removable galvanized steel basket and stainless
steel screen.
Available Options
-26 Cast Aluminum
-30 Acid-Resisting Inside and Outside
61032 2 9
230
Interceptors_08.qxd 5/2/08 3:02 PM Page 231
SOLIDS INTERCEPTORS
61040A SERIES TOP ACCESS ON-FLOOR TRAP TYPE
APPLICATION
For use as a means of collecting large amounts of solids such as metal chips, plaster
and grindings in dental offices, hospitals and optical shops or similar establishments
where the unit can be mounted on the floor under the sink to recover precious metals
as well as intercept harmful debris. Cleaning is accomplished by removal of top cover
and basket.
SPECIFICATION
JOSAM 61040A Series steel Solids Interceptor with acid-resisting coating, top access,
on-floor trap type, with 2" threaded connections, side outlet, gasketed non-skid cover,
removable galvanized steel basket and stainless steel screens.
Available Options
-EXT Extension, 6” Standard (Specify Extension Height)
-16 Monel Screens
INTERCEPTORS
TYPE NO. PIPE SIZE D E G LBS.
61042A 2 3 1/2 31 16 5/8 54
61043A 3 4 1/2 32 17 5/8 60 ■ MIN. HGT. REQUIRED FOR REMOVAL OF SOLIDS BASKET.
ADD EXT. HGT. TO MIN. HGT. REQUIRED IF FURNISHED WITH EXT.
61044A 4 5 1/2 33 18 5/8 55
SPECIFICATION
JOSAM 61070 Series cast iron Solids Interceptor with acid-resisting coating, top access,
in-line type, threaded connections, 2" threaded drain or blow-off connection, removable
perforated copper basket with conical solid bottom, gasketed cast iron support rim and
gasketed cover seated on basket support rim secured with hex head bolts.
Available Options
-4 Galvanized Cast Iron Parts
-15 Stainless Steel Basket
-86 Flat Bottom Basket
231
Interceptors_08.qxd 5/2/08 6:14 PM Page 232
SOLIDS INTERCEPTORS
61080 SERIES TOP ACCESS IN-LINE TYPE
APPLICATION BASKET FREE AREA
250 SQ. IN.
For use as a means of collecting very large quantities of solid waste materials, hair,
lint and foreign particles ahead of swimming pool filters and processing devices or
commercial laundry equipment. Cleaning is accomplished in minimal time by removal
of top cover secured with gasketed compression yoke and basket.
SPECIFICATION
JOSAM 61080 Series cast iron Solids Interceptor with acid-resisting coating, top access,
in-line type, threaded connections, 2" threaded drain or blow-off connection, removable
perforated copper basket with conical solid bottom, gasketed cast iron support rim and
gasketed cover seated on basket. Support rim secured with hex head bolts.
Available Options
-4 Galvanized Cast Iron Parts
-15 Stainless Steel Basket
-86 Flat Bottom Basket
INTERCEPTORS
SPECIFICATION
JOSAM 61800 Series Lint Interceptor with acid-resisting coating, non-skid cover, gal-
vanized steel bucket with stainless steel screens and threaded connections.
Available Options
-EXT Extension, 6” Standard (Specify Extension Height)
232
Backwater Valves_08.qxd 3/27/08 12:08 PM Page 233
BACKWATER VALVES
Features
A SAFEGUARD AGAINST WATER DAMAGE
Anyone who has ever experienced flooding caused by a reversal of sewage flow never wants to be confronted with a reoccurrence.
Damage is extensive and generally uninsurable. Backwater and its attendant problems must therefore be seriously considered in terms
of adequate control and prevention by individuals responsible for the design and construction of buildings. To overlook the possibility
of backwater or underestimate the destruction and unsanitary conditions that will result from uncontrolled backwater would be a grave
mistake. JOSAM Backwater Valves provide the flood control that is required.
233
Backwater Valves_08.qxd 3/27/08 12:08 PM Page 234
BACKWATER VALVES
How to Order
Unless optional materials are specified, standard material shown in Specification will be provided. Last digit indicates outlet size.
Series 67100A Backwater Valve is for use with any 4" or 6" No-Hub Drain.
Outlet Size
SWING-CHECK TYPE
67500 67600 67650 67720 67800
Hub & Spigot Connections Hub & Spigot Connections Pit Type, Spigot Connection Terminal Type, Hub Connection Terminal Type, Hub Connection
Page 237 Page 237 Page 238 Page 238 Page 239
234
Backwater Valves_08.qxd 3/27/08 12:08 PM Page 235
BACKWATER VALVES
67100A SERIES BALL-FLOAT ADAPTER TYPE
APPLICATION
For use with any 4" or 6" No-Hub floor drain where protection from backflow may
be necessary.
SPECIFICATION
JOSAM 67100A Series coated cast iron Backwater Valve, plastic ball-float, elastomer
seat, bronze cage and bottom outlet spigot connection.
Available Options
-5 Galvanized Cast Iron Parts
-35 1/2" Primer Tap
SPECIFICATION
JOSAM 67360 Series coated cast iron combination Backwater Valve, straight-through
type, bronze swing-check assembly, bronze manually operated shear-gate with non-rising
stem and hub and spigot connections.
Available Options
▼ -DH Double Hub
-15 Open Flap
-28 12" Cast Iron Extension and Stem
-29 24" Cast Iron Extension and Stem
BACKWATER VALVES
67360-DH SERIES with -DH Double Hub
APPLICATION STRAIGHT-THROUGH TYPE
For use in main or branch drain lines to protect basements and lower areas from FOR EXISTING
sewer back up. Flapper type backwater valve provides continuous protection against INSTALLATIONS
sewage backflow into building. Manually closed shear-gate valve provides additional
complete "closure" protection during emergency storm conditions or when building
is completely shut down.
SPECIFICATION
JOSAM 67360-DH Series coated cast iron combination Backwater Valve, straight-
through type, bronze swing-check assembly, bronze manually operated shear-gate
with non-rising stem and hub connections.
67363-DH 3 8 12 16 80
67364-DH 4 8 12 16 80
67365-DH 5 10-1/2 14-1/2 16 120
67366-DH 6 10-1/2 14-1/2 16 120
SPECIFICATION
JOSAM 67400 Series coated cast iron Backwater Valve, offset type, bronze fixed
swing-check assembly, bolted gasketed cover and no-hub connections.
236
Backwater Valves_08.qxd 4/22/08 6:46 PM Page 237
BACKWATER VALVES
67500 SERIES HUB & SPIGOT, SWING-CHECK TYPE
APPLICATION BOLTED COVER,
OFFSET TYPE
For use in main or branch drain lines to protect basements and lower areas from
sewer back up. Flapper type backwater valve provides continuous protection against
sewage backflow into building.
SPECIFICATION
JOSAM 67500 Series coated cast iron Backwater Valve, offset type, bronze swing-
check assembly, bolted gasketed cover and hub and spigot connections.
Available Options
* -10 Threaded Bronze Cover 3"-8"
-15 Open Flap
-30 2" Auxiliary Inlet with Bronze Plug
TYPE PIPE
NO. SIZE B D E F H J K M LBS.
67502 2 6-7/8 6-1/4 7 5 1-1/2 6-1/2 12 5-1/4 25
SPECIFICATION
JOSAM 67600 Series coated cast iron Backwater Valve, offset type, bronze swing-
check assembly, bolted gasketed cover and hub and spigot connections.
Available Option
-15 Open Flap
TYPE PIPE
NO. SIZE OFFSET C D E F G LBS.
67610 10 2 8-1/2 10-1/2 23 10-1/2 13 216
67612 12 2 9-1/4 11-1/4 25-3/4 12 15 277
237
Backwater Valves_08.qxd 3/27/08 12:08 PM Page 238
BACKWATER VALVES
67650 SERIES COMBINED DRAIN/SWING-CHECK TYPE
APPLICATION SECURED COVER,
For use at the base of walls in pits or pools, where elevation is limited, requiring a PIT TYPE
vertical inlet drain with a back outlet and a flapper type backwater valve to safe-
guard pit equipment or pool from backflow contamination.
SPECIFICATION
JOSAM 67650 Series coated cast iron Backwater Valve, pit type, bronze swing-check
assembly, vertical inlet grate and spigot connection.
Available Options
-1 Satin Finish Nikaloy Face
-2 Satin Finish Bronze Face
-5 Galvanized Cast Iron Parts
-25 Flashing Clamp Device
-VP Secured Face, Vandal-Proof Screws
-LBV Less Backwater Valve
FREE
TYPE PIPE AREA
BWV, HYDRANTS & SHOCKS
SPECIFICATION
JOSAM 67720 Series coated cast iron Backwater Valve, terminal type, bronze swing-
check assembly and hub connection.
Available Options
-15 Open Flap
238
Backwater Valves_08.qxd 3/27/08 12:08 PM Page 239
BACKWATER VALVES
67800 SERIES HUB INLET, SWING-CHECK TYPE
APPLICATION TERMINAL TYPE
For use at the termination of drain lines which discharge into manholes and basins or
through retaining walls to protect the lines from backflow and discourage the
entrance of vermin.
SPECIFICATION
JOSAM 67800 Series coated cast iron Backwater Valve, terminal type, bronze swing-
check assembly with bolted cast iron seat and hub connection.
Available Options
-4 Bronze Seat
-15 Open Flap
239
Hydrants_08.qxd 3/27/08 12:13 PM Page 240
HYDRANTS
HYDRASAN® I Features
The 71000 and 71050 Series (non-freeze) and 71020 and 71070 Series (mild climate) Wall Hydrants supply water for any use in all areas of public and
private buildings. These hydrants are designed to be installed in walls of various types of construction. They incorporate features such as integral vacuum
breaker-backflow preventer, pressure assisted closure and an automatic pressure relief valve. The 71000 and 71020 Series box type hydrants are for
installation where any protrusion may be a hazard, or where aesthetics or potential vandalism dictate secure flush-with-wall concealment of hydrant.
The 71050 and 71070 Series are for installation at the wall surface and are designed so that they will fit into the area occupied by a standard brick.
CONCEALED TYPES
71000 SERIES NON-FREEZE
71020 SERIES MILD CLIMATE
SELF-STORING TOOL VACUUM BREAKER-BACKFLOW PREVENTER®
Key-operated, self storing tool assures that, should Integral with the hose connection nozzle, responds
service ever become necessary, the working parts of the instantly during normal flow to seal off air ports and
hydrant can be removed, repaired, and reassembled, permit passage of outflow water. In event of pressure
quickly and easily, from the front, thus returning the imbalance due to sudden supply pressure drop below
hydrant to operation in a short period of time. No outlet or back-pressure, response is immediate to seal
special tools are required. against backflow and open air ports to relieve vacuum
BWV, HYDRANTS & SHOCKS
EXPOSED TYPES
71050 SERIES NON-FREEZE
71070 SERIES MILD CLIMATE
PRESSURE ASSISTED CLOSURE PRESSURE RELIEF
Hydrant is closed utilizing the water pressure in the Automatic pressure relief valve relieves water pressure
system. The greater the pressure, the more positive the in the attached hose and permits air circulation and
seal. The force of water pressure moves the shuttle into drainage of hydrant and hose. Drainage will take place
its closed position. This design eliminates the surface providing discharge end of hose is open. This helps
to surface grinding created by conventional types of prevent bursting of hoses in the event of freezing.
hydrant closures, thus prolonging the life of the All servicing is accomplished through face of hydrant.
working parts. Once sealed, the valve will hold even
Removal and replacement of seat and shuttle are
under upstream pressure drops to zero p.s.i.
accomplished by the hydrant’s self-storing tool, which
is the actuator rod itself. No special tools are required
when hydrant is serviced.
240
Hydrants_08.qxd 3/27/08 12:13 PM Page 241
HYDRANTS
Unless optional materials are specified, standard material
How To Order Wall Hydrants shown in specification will be provided. Specify wall thickness.
241
Hydrants_08.qxd 3/27/08 12:13 PM Page 242
HYDRANTS
Repair Kits
We recommend that a complete HYDRANT REPAIR KIT be installed when it becomes necessary to repair a hydrant.
#1 5/16" Key 12 For 1420N - 71950 For 1400N – 1410N Old Style
71550 – 71650 – Previous Design
For HYDRASAN® I or II – Non-Freeze For 1430N Old Style 3/4" or 1" 71550P22U KIT #22
1440N or 71700 3/4"
71600 3/4" O.S. For 71500 – 71550 – 71650
#1 1/4" Key with Set Screw 1 New Style
#2 Actuator 1 #1 5/16" Key 1
#1 5/16" Key 1
#4 Shuttle 1 #2 Worm Stem 1
#2 Worm Stem 1
#5 Pressure Assist Rubber Seal 1 #3 Brass Washer 1
#3 Brass Washer 1
#6 Pressure Relief Valve (O-Ring) 1 #5 Packing 1
#6 Worm Assy. Nut 1
#15 Seat 1 #15 Plunger 1
#12 Nylon Seat 1
Allen Wrench 1 71600P15U KIT #15
#15 Plunger 1
#15 Seat 1
Allen Wrench 1
242
Hydrants_08.qxd 3/27/08 12:13 PM Page 243
HYDRANTS
Parts Drawings
Hydrant replacement parts are available in Repair Kits only. See facing page to determine appropriate kit number.
For replacement rod assemblies, contact your local representative.
243
Hydrants_08.qxd 3/27/08 12:13 PM Page 244
HYDRANTS
Typical Installations
71000 Series HYDRASAN® I installed in an exterior brick wall 71070 Series HYDRASAN® I installed in an exterior brick wall
BWV, HYDRANTS & SHOCKS
Drawing showing how to determine wall thickness Drawing showing how to determine depth of bury
71600 Series Hydrant shown installed in a yard 71650 Series TRI-TEMP Hydrant shown installed in a block wall
244
Hydrants_08.qxd 3/27/08 12:13 PM Page 245
HYDRANTS
71000 SERIES HYDRASAN® I WITH VACUUM BREAKER • NON-FREEZE
APPLICATION
For use where a potable water supply is required outside a building. The shut off
design provides for frost protection and the integral vacuum breaker and backflow
preventer protect the potable water supply. The recessed box with hinged latching
cover conceals the nozzle and operating mechanism and prevents unauthorized use.
SPECIFICATION
JOSAM 71000 Series cast bronze box type non-freeze wall Hydrant with satin stain-
less steel hinged latching cover, 3/4" H.P.T. outlet, integral vacuum breaker-backflow
preventer, pressure relief valve, bronze casing, bronze operating parts convertible into
service tool, 3/4" female and 1" male N.P.T. inlet connection.
Available Options
* -52 Satin Finish Face, Cast Bronze Box
* -54 Satin Finish Face, Cast Nikaloy Box
-72 Wall Clamp
-73 Solder Inlet Adapter
-74 Union Elbow Assembly
-91 1" Hose Pipe Threaded Outlet
-95 Cylinder Vandal-Proof Lock
SPECIFICATION
JOSAM 71020 Series cast bronze box type mild-climate wall Hydrant with satin stain-
less steel hinged latching cover, 3/4" H.P.T. outlet, integral vacuum breaker-backflow
preventer, pressure relief valve, bronze operating parts convertible into service tool,
3/4" female and 1" male N.P.T. inlet connection.
Available Options
* -52 Satin Finish Face, Cast Bronze Box
* -54 Satin Finish Face, Cast Nikaloy Box
-72 Wall Clamp
-73 Solder Inlet Adapter
-74 Union Elbow Assembly
-91 1" Hose Pipe Threaded Outlet
-95 Cylinder Vandal-Proof Lock
TYPE NO. LBS. r WHEN UNION ELBOW IS USED, THIS DIM. IS 7-5/8" OVERALL.
* BOX DEPTH IS 1-5/8" ON NIKALOY AND BRONZE BOXES.
71020 8
245
Hydrants_08.qxd 3/27/08 12:13 PM Page 246
HYDRANTS
71050 SERIES HYDRASAN® I WITH VACUUM BREAKER • NON-FREEZE
APPLICATION
For use where a potable water supply is required inside or outside a building. The
shut off design provides for frost protection and the integral vacuum breaker and
backflow preventer protect the potable water supply. Will fit into the area occupied
by a standard brick.
SPECIFICATION
JOSAM 71050 Series cast bronze non-freeze wall Hydrant with satin finish Nikaloy
face, 3/4"H.P.T. outlet, integral vacuum breaker-backflow preventer, pressure relief
valve, bronze casing, bronze operating parts convertible into service tool, 3/4" female
and 1" male N.P.T. inlet connection.
Available Options
-50 Satin Finish Bronze Face
-72 Wall Clamp
-73 Solder Inlet Adapter
-74 Union Elbow Assembly
-91 1" Hose Pipe Threaded Outlet
71050-6 6 3 71050-18 18 5
71050-8 8 4 71050-20 20 6
r
71050-10 10 4 71050-22 22 6
WHEN UNION ELBOW IS USED, THIS DIM. IS 6-3/8" OVERALL.
71050-12 12 4 71050-24 24 6
SPECIFICATION
JOSAM 71070 Series cast bronze mild-climate wall Hydrant with satin finish Nikaloy
face, 3/4" H.P.T. outlet, integral vacuum breaker-backflow preventer, pressure relief
valve, bronze operating parts convertible into service tool, 3/4" female and 1" male
N.P.T. inlet connection.
Available Options
-50 Satin Finish Bronze Face
-72 Wall Clamp
-73 Solder Inlet Adapter
-74 Union Elbow Assembly
-91 1" Hose Pipe Threaded Outlet
246
Hydrants_08.qxd 5/2/08 2:23 PM Page 247
HYDRANTS
71400 SERIES GROUND HYDRANT • NON-FREEZE
APPLICATION
For use where an outside potable water supply is required. N.P.T. hole drains the
body for frost protection.
SPECIFICATION
JOSAM 71400 Series galvanized steel non-freeze ground Hydrant with cast iron head,
solid brass 3/4” H.P.T. outlet, cam type operating control lever for full or variable flow,
stainless steel operating rod, one-piece plunger and 3/4” F.P.T. inlet.
SPECIFICATION
JOSAM 71450 Series galvanized steel non-freeze ground Hydrant with heavy-duty cast
iron head, solid brass H.P.T. outlet, cam type operating control lever for full or variable
flow, stainless steel operating rod, one-piece plunger and 3/4” F.P.T. inlet.
Available Option
-91 1” Hose Pipe Threaded Inlet and Outlet
247
Hydrants_08.qxd 5/2/08 1:22 PM Page 248
HYDRANTS
71600 SERIES YARD HYDRANT, BOX TYPE • NON-FREEZE
APPLICATION
For use where an outside potable water supply is required. The 1/8" NPT hole drains
the body for frost protection and the recessed box with hinged latching cover con-
ceals the nozzle and operating mechanism and prevents unauthorized use.
SPECIFICATION
JOSAM 71600 Series cast bronze non-freeze yard Hydrant with 3/4” H.P.T. outlet,
satin finish face Nikaloy box, hinged latching cover, bronze casing, Neoprene plunger,
removable bronze operating parts and straight inlet with standard hose connection.
Available Options
-52 Satin Finish Face, Bronze Box
-91 1” Hose Pipe Threaded Outlet
-95 Cylinder Vandal-Proof Lock
-97 1/8" Tapped Drain Hole in Box
71600-3 3’ Bury 8
71600-4 4’ Bury 11
71600-5 5’ Bury 13
71600-6 6’ Bury 15
SPECIFICATION
JOSAM 71650 Series TRI-TEMP cast bronze non-freeze wall Hydrant with T-Handle, satin
finish face Nikaloy box, hinged latching cover, bronze casings, Neoprene plungers, remov-
able nylon seats, removable bronze operating parts, 3/4" female and 1" male N.P.T. inlet
connections for hot and cold water and a mixing chamber with 3/4" H.P.T. outlet.
Available Options
-72 Wall Clamps
-73 Solder Inlet Adapters
-74 Union Elbow Assemblies
-81 Vacuum Breaker
-91 1" Hose Pipe Threaded Outlet
-95 Cylinder Vandal-Proof Lock
248
Shock Absorbers_08.qxd 3/27/08 12:19 PM Page 249
SHOCK ABSORBERS
ABSORBOTRON® Sizes & Fixture-Unit Ratings
The proper size of ABSORBOTRON® units can be determined for one or more fixtures on the basis of the Fixture-Unit values as shown in the tables below.
▲ Pressure Reducing Valves should be installed on branch lines serving fixtures and equipment, when the pressure in the line exceeds 60 p.s.i. Most fixtures and equipment are designed
to function at pressures ranging between 20 p.s.i. and 50 p.s.i. For quiet flow of water in the piping, it is recommended that a velocity between 5-8 feet per second be maintained.
249
Shock Absorbers_08.qxd 3/27/08 12:19 PM Page 250
SHOCK ABSORBERS
Selection for Long Piping Runs
The majority of sizing and selection applications will involve single and multiple fixture branch lines. These are easily handled with Table IV.
The remainder of applications involves individual runs of piping to a remote item of equipment. The properly sized water hammer arresters for
such applications can be determined by Table V and Table V-A.
TABLE V TABLE V-A
FOR WATER PRESSURES UP TO 65 P.S.I.G. FOR WATER PRESSURES OVER 65 P.S.I.G. AND UP TO 85 P.S.I.G.
P.D.I. Water Hammer Arrester Sizes P.D.I. Water Hammer Arrester Sizes
Length of Nominal Pipe Diameter Length of Nominal Pipe Diameter
Pipe 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Pipe 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
25 A A B C D E 25 B B C D E F
50 A B C D E F 50 B C D E F CF
75 B C D AE F EF 75 C D E F CF FF
100 C D E F CF FF 100 D E F CF EF EFF
125 C D F AF EF EFF 125 D E CF DF FF BFFF
150 D E F DF FF FFF 150 E F CF FF DFF FFFF
Ideally the flow pressure in branch lines serving fixtures should When long runs of piping are employed to serve a remote
never exceed 60 P.S.I.G. Pressure reducing valves should be item of equipment, the water hammer arrester should be
installed to maintain proper pressure. However, when flow located as close as possible to the point of quick closure.
pressures of 65 to 85 P.S.I.G. are used, the next larger size water At this location, the water hammer arrester will control the
hammer arrester should be selected. Refer to Table V-A. developed energy and prevent the shock wave from surging
through the piping system.
BWV, HYDRANTS & SHOCKS
EXAMPLE
It is relatively easy to select the proper sized Shock Absorber for a The proper size of Shock Absorber can also be selected once the total
multiple fixture branch. The above represents a typical riser diagram of fixture-units for a cold or hot water branch line is known. It is only
that an engineer may include with his set of drawings necessary to apply the fixture-units to The Selector Chart, Table IV and
select the appropriate Shock Absorber.
When sizing the cold and hot water branch lines, it is usual practice
to obtain the total number of fixture units on each branch line. This It is suggested that the engineer employ P.D.I. symbols for his riser
information is then applied to water pipe sizing charts to determine diagrams, as shown in the illustration above. This practice will enable
the required size of the branch lines. manufacturers to furnish the correct units.
250
Shock Absorbers_08.qxd 5/2/08 1:27 PM Page 251
SHOCK ABSORBERS
75000 SERIES STAINLESS STEEL
APPLICATION
For use where hydrostatic shock may be present such as near flush valves, faucets,
laundry machines, dishwashers or any type of pneumatic, electric or spring-loaded
quick closing valve.
SPECIFICATION
JOSAM 75000 Series ABSORBOTRON II® Shock Absorber with stainless steel shell,
hydro-pneumatic cushion of nitrogen, stainless steel bellows and stainless steel male
threaded pipe nipple.
Type numbers 75001A through 75006F meet P.D.I. Standard WH-201 and A.S.S.E.
Standard 1010.
Certificate of Compliance available on request.
SPECIFICATION
JOSAM 75000-S Series ABSORBOTRON II® Shock Absorber with wrought copper shell,
hydro-pneumatic air cushion, HHPP piston, wrought copper adapter and male threaded
connection.
251
Shock Absorbers_08.qxd 3/27/08 12:19 PM Page 252
Trench Drains_08.qxd 3/27/08 3:12 PM Page 253
TRENCH DRAINS
Options
(-11) OPTION, HEAVY-DUTY CONVEX GRATE (-30) OPTION, FLASHING CLAMP DEVICE
allows drainage through openings in top of grate even in the event assures the positive bond of the membrane between the flange
of perimeter blockages by leaves or debris. and clamp ring.
How To Order
Unless optional materials are specified, standard material shown in Specification will be provided.
Last digit indicates outlet size.
Outlet Size
TRENCH DRAINS
Option, Flashing Clamp Device
76400, 76600 and 76800 Series Frame & Grate Assemblies use 76300, 76500 and
76700 Series Grates respectively in a SIDE-BY-SIDE configuration.
253
Trench Drains_08.qxd 5/2/08 1:34 PM Page 254
SPECIFICATION
JOSAM 76000 Series coated cast iron rectangular sectional Trench Drain with heavy-
duty body sections and integral anchor flange, heavy-duty loose-set SUPER-FLO® Grates
TRENCH DRAINS
with perimeter drainage slots, 5/16" x 3-1/2" grate openings, secondary loose-set dome
strainer and bottom outlet inside caulk connection.
Available Options
-EXT Extension Section -30 Flashing Clamp Device
-1 Satin Finish Nikaloy Top -40 Galvanized Cast Iron Parts
-2 Satin Finish Bronze Top OUTLET:
-7 Ductile Iron Grate -X Inside Caulk Outlet
* -VP Secured Grate,
Vandal-Proof Screws
254
Trench Drains_08.qxd 5/2/08 1:34 PM Page 255
TRENCH DRAINS
76010 SERIES 12" WIDE, RECTANGULAR
APPLICATION
For use in heavy traffic areas where a wide, continuous trench drain that can serve as
a temporary reservoir for large quantities of water is required, such as in parking
garages, vehicle repair facilities, manufacturing plants and ramps. An outlet section
can be used individually as an area drain.
SPECIFICATION
JOSAM 76010 Series coated cast iron rectangular sectional Trench Drain with heavy-duty
body sections and integral anchor flange, heavy-duty loose-set grates, 7/16" x 2-3/4"
grate openings and bottom outlet.
Available Options
-EXT Extension Section -30 Flashing Clamp Device
-1 Satin Finish Nikaloy Top -40 Galvanized Cast Iron Parts
-2 Satin Finish Bronze Top -70 Sediment Bucket
-7 Ductile Iron Grate -70-40 Bucket, Galvanized
-11 Convex Grate OUTLET:
-VP Secured Grate, -X Inside Caulk Outlet
Vandal-Proof Screws
TRENCH DRAINS
SPECIFICATION
JOSAM 76300 and 76400 Series coated cast iron rectangular light-duty sectional
Trench Grate, 12" x 20" with 1/2" x 5" grate openings.
Available Options
-1 Satin Finish Nikaloy Grate, -VP Secured Grate,
Stainless Steel Frame Vandal-Proof Screws
-7 Ductile Iron Grate -40 Galvanized
-8-2 All Bronze with
Satin Finish Top
255
Trench Drains_08.qxd 5/2/08 1:34 PM Page 256
TRENCH DRAINS
76500 & 76600 SERIES MEDIUM-DUTY, RECTANGULAR
APPLICATION
For use in medium traffic areas where a concrete or similarly constructed trench with
1-1/4" recessed frame, by others, has been constructed for use with JOSAM grate
only. May be used end-to-end for 12" wide trench as long as needed. 76501 includes
single grate and frame, by JOSAM, 24-5/8" x 12-5/8". 76502 includes end-to-end
grates and frame, by JOSAM. Frame and grate combination may be ordered to the
necessary length to complete a continuous trench 12-5/8" wide. 76602 includes side-
by-side grates and frame by JOSAM. Frame and grate combination may be ordered to
the necessary length to complete a continuous trench 24-5/8" wide.
SPECIFICATION
JOSAM 76500 and 76600 Series coated cast iron rectangular medium-duty sectional
Trench Grate, 12" x 24" with 1/2" x 4-3/8" grate openings.
Available Options
-1 Satin Finish Nikaloy Grate, Stainless Steel Frame
-7 Ductile Iron Grate
-8-2 All Bronze with Satin Finish Top
-VP Secured Grate, Vandal-Proof Screws
-40 Galvanized
SERIES NO. TYPE NO. DESCRIPTION C LBS. GRATE SLOT OPENING 4-3/8” X 1/2”
76500 76500 Grate Only 24 40 DIM. OF TRENCH IS "C" DIM. LESS 3"
76500 76501 Single Grate & Frame 24-5/8 57 FREE AREA OF EACH GRATE IS 90 SQ. IN.
DIM. GIVEN IS BACK-TO-BACK OF 1-1/2" x 1-1/2" x 1/4" ANGLE FRAME.
76500 76502 2-Grate Section 48-5/8 108
■ LAST TWO DIGITS OF THESE SERIES INDICATE THE NUMBER OF GRATES.
76600 76602 2-Grate Section 24-5/8 103
SPECIFICATION
JOSAM 76700 and 76800 Series coated cast iron rectangular heavy-duty sectional
Trench Grate, 12" x 24" with 1-1/2" x 4-1/4" grate openings.
Available Options
-1 Satin Finish Nikaloy Grate, Stainless Steel Frame
-7 Ductile Iron Grate
-8-2 All Bronze with Satin Finish Top
-VP Secured Grate, Vandal-Proof Screws
-40 Galvanized
SERIES NO. TYPE NO. DESCRIPTION C LBS. GRATE SLOT OPENING 4-1/4” X 1-1/2”
76700 76700 Grate Only 24 56 DIM. OF TRENCH IS "C" DIM. LESS 3"
76700 76701 Single Grate & Frame 24-5/8 73 FREE AREA OF EACH GRATE IS 100 SQ. IN.
DIM. GIVEN IS BACK-TO-BACK OF 1-1/2" x 1-1/2" x 1/4" ANGLE FRAME.
76700 76702 2-Grate Section 48-5/8 140
■ LAST TWO DIGITS OF THESE SERIES INDICATE THE NUMBER OF GRATES.
76800 76802 2-Grate Section 24-5/8 135
256
Misc - Traps & Access_08.qxd 3/27/08 3:04 PM Page 257
ADAPTERS
88400 88450 88550 88560 88600
No-Hub Spigot Adapter Trap Primer Adapter Hub Adapter, Female Threaded Outlet Hub Adapter Reducing Hub
Male Threaded Outlet
257
Misc - Traps & Access_08.qxd 3/27/08 3:04 PM Page 258
MISCELLANEOUS PRODUCTS
85220 SERIES 5" X 7" 90° ANGLE STRAINER
APPLICATION
Threaded side outlet drain for use at the base of walls in pits or pools, where
elevation is limited. Angle grate provides ample drainage and is slotted to prevent
entrance of debris.
SPECIFICATION
JOSAM 85220 Series coated cast iron 5" x 7" 90° angle Swimming Pool and Pit
Drain with anchor flange, secured bar type angle grate with frame and side outlet
threaded connection.
Available Options
-3 Chrome Plated Bronze Face
-VP Secured Face, Vandal-Proof Screws
-41 Clamp Device
-42 Ground Screw
-47 Galvanized Cast Iron Parts
OUTLET:
-T Threaded Outlet
SPECIFICATION
JOSAM 85800 Series coated cast iron 12-3/4" x 7-1/2" drain, loose-set anti-tilting
grate and bottom outlet threaded connection.
Available Options
-1 Satin Finish Nikaloy Top
-2 Satin Finish Bronze Top
-3 Chrome Plated Bronze Top
-VP Secured Grate, Vandal-Proof Screws
-42 Grounding Screw
-47 Galvanized Cast Iron Parts
OUTLET:
-T Threaded Outlet
MISC., TRAPS & ACCESS.
258
Misc - Traps & Access_08.qxd 3/27/08 3:04 PM Page 259
MISCELLANEOUS PRODUCTS
85810 SERIES RECTANGULAR PATTERN
APPLICATION
For use in non-traffic areas where space is limited such as in trenches, under counters
or against walls, in locations requiring narrow drains with ample free drainage.
SPECIFICATION
JOSAM 85810 Series coated cast iron 12-7/8" x 5-3/8" Drain, loose-set anti-tilting
grate and bottom outlet.
Available Options
-1 Satin Finish Nikaloy Top
-2 Satin Finish Bronze Top
-3 Chrome Plated Bronze Top
-VP Secured Grate, Vandal-Proof Screws
-42 Grounding Screw
-47 Galvanized Cast Iron Parts
OUTLETS:
-T Threaded Outlet
-X Inside Caulk Outlet
SPECIFICATION
JOSAM 85903-Z Series coated cast iron drain with no-hub connection and medium-
duty secured grate.
259
Misc - Traps & Access_08.qxd 5/1/08 4:30 PM Page 260
SPECIFICATION
JOSAM 88100 Series coated cast iron "P" Trap, spigot inlet and side outlet spigot
connection.
Available Options
-51 1/2" Flushing Tap
-60 Bronze Plug
SPECIFICATION
JOSAM 88210 Series coated cast iron Deep Seal "P" Trap with indirect waste funnel
inlet and side outlet threaded connection.
Available Options
-8 All Bronze
-51 1/2" Flushing Tap
-72 Bronze Bucket
MISC., TRAPS & ACCESS.
260
Misc - Traps & Access_08.qxd 3/27/08 3:04 PM Page 261
SPECIFICATION
JOSAM 88250 Series all bronze Primer Valve with removable operating parts, integral
vacuum breaker and gasketed access cover for installation in a cold water service line
to a plumbing fixture with trap connection for maintaining trap seal.
Available Options
-10 Polished Chrome Plated
-90 1/2" Female Copper Connection
-91 1/2" Female IPS Union Connection
SPECIFICATION
JOSAM 88300 Series all bronze trap primer valve with 1/2” N.P.T. inlet, integral back-
flow preventer, vacuum breaker ports and 1/2” F.N.P.T. outlet for connection to plastic
distribution unit for two to four plumbing fixtures.
261
Misc - Traps & Access_08.qxd 5/1/08 4:30 PM Page 262
SPECIFICATION
JOSAM 88400 Series coated cast iron Spigot Adapter with no-hub by no-hub connections.
Available Options
-40 Galvanized Cast Iron Parts
-49 3/4" Primer Tap
-50 1/2" Primer Tap
SPECIFICATION
JOSAM 88450 Series coated cast iron trap primer adapter with no-hub by gasketed
hub connections.
MISC., TRAPS & ACCESS.
262
Misc - Traps & Access_08.qxd 3/27/08 3:04 PM Page 263
SPECIFICATION
JOSAM 88550 Series coated cast iron Hub Adapter with standard cast iron soil pipe
hub and female threaded outlet.
Available Option
-40 Galvanized Cast Iron Parts
SPECIFICATION
JOSAM 88560 Series coated cast iron Hub Adapter with standard cast iron soil pipe
hub and male threaded outlet.
Available Option
-40 Galvanized Cast Iron Parts
263
Misc - Traps & Access_08.qxd 5/1/08 4:30 PM Page 264
SPECIFICATION
JOSAM 88600 Series coated cast iron Hub Adapter with standard cast iron soil pipe
hub and male threaded outlet.
Available Option
-40 Galvanized Cast Iron Parts
SPECIFICATION
JOSAM 88900 Series coated cast iron Air Gap with integrally cast air ports, threaded
inlet and extra-heavy spigot outlet.
Available Option
-40 Galvanized Cast Iron Parts
MISC., TRAPS & ACCESS.
264
Misc - Traps & Access_08.qxd 3/27/08 3:04 PM Page 265
SPECIFICATION
JOSAM 88910 Series coated cast iron Air Gap with integrally cast air ports, female
threaded inlet and outlet.
Available Option
-40 Galvanized Cast Iron Parts
SPECIFICATION
JOSAM 88950 Series Nikaloy Fresh Air inlet with satin perforated grille, steel pipe
expansion anchoring device and Vandal-Proof spanner locking device.
Available Option
-2 Satin Finish Bronze Face
FREE AREA
TYPE NO. PIPE SIZE B C D SQ. IN. LBS.
88952 2 5-1/4 8 5-5/8 8 3
88953 3 5-1/4 8 5-/58 8 3
88954 4 5-1/4 8 5-5/8 8 3
88955 5 7-1/4 10 6-5/8 16 4
88956 6 9-1/4 12 7-5/8 26-3/4 6
88958 8 11-1/4 14 8-5/8 40 8
265
Misc - Traps & Access_08.qxd 5/1/08 4:30 PM Page 266
SPECIFICATION
JOSAM 88970 Series Satin Finish Nikaloy Face Fresh Air inlet with satin slotted con-
vex grille and female threaded outlet.
Available Options
-8-2 All Bronze with Satin Finish Face
-VP Secured Grate, Vandal-Proof Screws
FREE AREA
TYPE NO. PIPE SIZE B C D SQ. IN. LBS.
88974 4 6 1-1/8 5-1/2 9 3
88975 5 7 1-1/4 6-1/2 14 4
MISC., TRAPS & ACCESS.
266
PVC_08.QXD 4/10/08 1:10 PM Page 267
PVC
PVC Product Features
PVC PRODUCTS
Josam PVC Floor Drains, Floor Sinks, and Cleanouts contain the same design features as Josam Cast Iron specification drainage products. The lightweight mate-
rial is easy to install.
Polyvinyl Chloride
is a rigid material that is chemically non-reactive. It has a broad range of application, from high-volume construction to simple electric wire insulation and coat-
ing. PVC possesses good weathering properties, is low-cost and corrosion resistant. It has good electrical insulation properties, dimension and stability at room
temperature, a good combination of stiffness and impact strength, has flame resistant and fire preventative properties.
9” MEDIUM-DUTY TOP
Round non-metallic grate is chemical and temperature
resistant with 24 square inches of free area to accept
heavy flow. Optional half grate for indirect waste and
PVC sediment bucket are also available.
267
PVC_08.QXD 3/28/08 3:10 PM Page 268
PVC DRAINS
32100-PVC 35100-PVC 37800-PVC
9" Round Top 8" Square Cast Iron Top 12" Square Cast Iron Top
268
PVC_08.QXD 5/1/08 4:25 PM Page 269
PVC
30000-PVC SERIES PVC BODY WITH COLLAR
APPLICATION FOR USE WITH ALL JOSAM
For use with all adjustable strainers. Wide flange anchors drain body in concrete and STRAINERS & ACCESSORIES
works in conjunction with the clamp collar to redirect waste through the collar’s
weepholes if seepage occurs around the strainer. The WEJLOC® clamp provides a
PVC PRODUCTS
non-puncturing positive bond of the waterproofing membrane to the drain body for
applications where floors with standing water are to be sealed off from areas below.
The collar is also invertible for extra vertical strainer adjustment to meet finished
floor level.
SPECIFICATION
JOSAM 30000-PVC Series PVC Floor Drain, two-piece body with double drainage
flange, 1/2” primer tap with plug, WEJLOC® invertible non-puncturing flashing collar
with weepholes, threaded to receive all JOSAM adjustable strainers and solvent weld
bottom outlet for Schedule 40 PVC Pipe.
Available Options
-MD PVC Clamp Collar with 3” Socket Connection
-49 3/4” Primer Tap
OUTLET:
-S Solvent Weld Outlet for Schedule 40 PVC Pipe
SPECIFICATION 4 1/4"
JOSAM 30300-PVC Series PVC Body, threaded to receive all JOSAM adjustable
strainers. Combination 3” x 4” solvent weld bottom outlet fits over 3” or inside 3 3/4"
4” Schedule 40 PVC Pipe.
Available Options
OUTLET:
-S Solvent Weld Outlet for Schedule 40 PVC Pipe
3"
3 1/2"
4"
269
PVC_08.QXD 3/28/08 3:10 PM Page 270
PVC
A SERIES ROUND NIKALOY SUPER-FLO® STRAINER
APPLICATION FOR USE WITH 30000-PVC
For use in finished areas with pedestrian traffic such as toilet and shower rooms. AND 30304-PVC BODIES
PVC PRODUCTS
Available Options
-SS Stainless Steel, 5A, 6A, 7A, 8A -CP Chrome Plated, 5A, 6A
-2 Satin Finish Bronze -J Backwater Valve
-80 Perforated Stainless Steel -VP Secured Grate,
Basket Vandal-Proof Screws
Available Options
-SS Stainless Steel, 5S, 6S, 8S -CP Chrome Plated, 5S, 6S
-2 Satin Finish Bronze -J Backwater Valve
-80 Perforated Stainless Steel -VP Secured Grate,
Basket Vandal-Proof Screws
Available Options
-HG Half Grate OUTLET:
-B Bucket -S Solvent Weld Outlet for
-49 3/4” Primer Tap Schedule 40 PVC Pipe
-50 1/2” Primer Tap
FOR OUTLET TYPE SPECIFY -S
TYPE NO. PIPE SIZE LBS.
32102-PVC 2 4
32103-PVC 3 4
32104-PVC 4 4
270
PVC_08.QXD 3/28/08 3:10 PM Page 271
PVC
35100-PVC SERIES PVC DRAIN ASSEMBLY, 8” SQUARE CAST IRON TOP
APPLICATION GRATE FREE AREA 19.9 SQ. IN.
For use in heavy traffic areas, such as warehouses and storage rooms, for any type of
floor construction where a square top complements construction or floor finish and
where a small to medium flow of liquid is anticipated. 9 1/4"
PVC PRODUCTS
SPECIFICATION 8" SQ
JOSAM 35100-PVC Series PVC Floor Drain, two-piece body with double drainage flange,
non-puncturing clamp collar with weepholes, 8” cast iron square top with heavy-duty
loose-set cast iron grate and solvent weld bottom outlet for Schedule 40 PVC pipe.
2 1/2"
Available Options
-1 Satin Finish Nikaloy Top
-2 Satin Finish Bronze Top
-15 Chained Grate
-49 3/4” Primer Tap X
-50 1/2” Primer Tap
OUTLET:
-S Solvent Weld Outlet for Schedule 40 PVC Pip
PIPE
SIZE
SPECIFICATION
13 1/8" SQ
JOSAM 37800-PVC Series PVC Floor Drain, two-piece body with flashing flange, shallow
body, non-puncturing flashing collar, weepholes, 12” cast iron square top with heavy-
duty loose-set cast iron grate and solvent weld bottom outlet for Schedule 40 PVC pipe. 12 1/4" SQ
271
PVC_08.QXD 5/1/08 4:25 PM Page 272
PVC
49320-PVC SERIES PVC BODY/DOME ASSEMBLY, FULL GRATE
APPLICATION
For use in non-traffic areas such as kitchens, supermarkets and hospitals. The 9”
square grate and medium sump accept moderate flow and the dome strainer inter-
cepts debris which could block the drain line.
PVC PRODUCTS
SPECIFICATION
JOSAM 49320-PVC Series PVC Floor/Drain Sink, 12” x 12” top with full PVC medium-duty
grate, aluminum dome and solvent weld bottom outlet for Schedule 40 PVC pipe.
Available Options
-LG Less Grate
-HG 1/2 Grate
-3Q 3/4 Grate
-NB Nickel Bronze Traffic Top
-3 1/2 Grate, Nickel Bronze
-4 3/4 Grate, Nickel Bronze
-5 Nikaloy Extra Heavy-Duty Grate & Rim
-7 Full Grate with 2-1/2” Center Opening
-VP Secured Grate, Vandal-Proof, NB Only
-16 Grate with 4” Round Funnel, NB Only
-17 Grate with 6” Round Funnel, NB Only
-18 Grate with 9” x 3-1/2” Oval Funnel, NB Only
-24 Chained Grate, NB Only
-50 1/2” Primer Tap
FOR OUTLET TYPE SPECIFY -S
OUTLET:
TYPE NO. PIPE SIZE H LBS.
-S Solvent Weld Outlet for Schedule 40 PVC Pipe
49322-PVC 2 6-7/8 8
49323-PVC 3 7-5/8 8
49324-PVC 4 7-7/8 8
SPECIFICATION
JOSAM 58630-PVC Series PVC Cleanout, round Nikaloy adjustable top with internal
bronze plug. Combination 3” x 4” solvent weld bottom outlet fits over 3” or inside
4” Schedule 40 PVC Pipe.
Available Options
-2 Satin Finish Bronze Top
-14 Carpet Cleanout Marker
-VP Secured Cover, Vandal-Proof Screws
OUTLET:
-S Solvent Weld Outlet for Schedule 40 PVC Pipe
272
JOSAM COMPANY | www.josam.com
Customer serviCe Centers
may 2008
90