Académique Documents
Professionnel Documents
Culture Documents
SeeGull EX Virtual Comm Port (VCP) Driver Product Release Notes Release 1.4.0.2 Document Number: 14RN38-00M Revision A March 2007
Restrictions: This document contains proprietary information that is protected by copyright; it is intended for use by PCTEL and its customers only. It is not to be disclosed to a third party. All rights reserved. No part of this document may be photocopied or reproduced in any way without the prior written permission of PCTEL, RF Solutions Group. The information contained in this document is subject to change without notice. PCTEL, RF Solutions Group makes no warranty of any kind with regard to this document. PCTEL, RF Solutions Group shall not be liable for errors or omissions contained herein or for incidental or consequential damages in connection with the use of this document.
Rev. A
Page 1 of 4
Trademarks
2007 PCTEL, Inc. All rights reserved. PCTEL, SeeGull, InSite, CLARIFY, the CLARIFY logo and the PCTEL logo are trademarks of PCTEL, Inc. All other trademarks are property of their respective owners. Specifications are subject to change without notice.
Copyright Information
No part of this document may be used or copied in any form or any means without prior written consent of PCTEL.
Rev. A
Page 2 of 4
SUPPORTED OPERATING SYSTEMS Windows XP, U.S. version only, Service Pack 2 Windows 2000, U.S. version only, Service Pack 4
SUPPORTED FEATURES
This product serves as the USB device driver for the SeeGull EX scanner. It allows the scanner to access through the USB port via a standard serial interface.
IMPROVEMENTS N/A RESTRICTIONS in CURRENT RELEASE It's recommended to only use the EV_RXCHAR event for SetCommMask function when VComm gets initialized When using the overlapped IO, the GetOverlappedResult function has to be called after ReadFile when number of returned bytes is 0. ERROR_IO_PENDING is possible when use the overlapped I/O and ReadFile. It should be ignored. The PurgeComm function cannot be used during VComm initialization. Use it when VComm gets closed. Disable the scanner Ack/Nack protocol to ensure optimum performance. The unsolicited inquiry message will not be sent after the Reset command is issued. Instead, reinitialize VComm and such message will come automatically. Its recommended to reinitialize the scanner after soft reset.
Rev. A
Page 3 of 4
Rev. A
Page 4 of 4