Académique Documents
Professionnel Documents
Culture Documents
STORAGE CABINET
INSTRUCTIONS FOR USE
A. GENERAL PRODUCT INFORMATION The product referred to in these instructions is a storage system for the AIO Solution , a medical device used for patient positioning and immobilisation in radiation therapy. B. PRODUCT DESCRIPTION This AIO cabinet is a storage system for "THE TOTAL AIO SOLUTION PACKAGE. It features retractable panels with dedicated spaces for all the items contained in the AIO Solution package. C. PRECAUTIONS FOR USE Always use the correct tools for screwing, glueing and cutting. Wear working gloves when handling the fibre wood plates to avoid injuries. Wear eye protection and working gloves whenever using power tools. The cabinet will tip over if all five panels are slid out at the same time! Therefore it is highly recommended to fix the cabinet to the wall with screws and plugs (not included in the package). Do not place the AIO HPL base plate Art. Nos. 32200 and 32201 in the cabinet as the hooks cannot carry the weight!
D. WEIGHTS AND DIMENSIONS A. CASE The case is made of fibre wood panels which are screwed together. Overall dimensions: Length 1980 mm (78) Width 1000 mm (39.4) Height 770 mm (30.3) Weight of packaging: 91 kg Total weight: 291 kg
B. AIO CABINET The AIO cabinet is made of fibre wood panels with melamine white finish. Overall dimensions: Width 1600 mm (63) Height 1980 mm (78) Depth 690 mm (27.2) Weight: 200 kg
Page 1 of 8
ORFIT INDUSTRIES N.V. ORFIT INDUSTRIES N.V. - Vertrieb Deutschland Radiotherapie ORFIT INDUSTRIES AMERICA
Vosveld 9a 2110 Wijnegem Belgium Altendorfer Kirchgasse 21 99734 Nordhausen 350 Jericho Turnpike, Suite 101 Jericho New York 11753 U.S.A
www.orfit.com
E. MAINTENANCE, CLEANING AND WASTE MANAGEMENT This product can be cleaned and disinfected by means of soapy water or an isopropanol based disinfectant, applied with a soft cloth. If unsure about the cleaning fluid, do not use. Never use aerosol sprays, corrosive cleaning agents, solvents or abrasive detergents. Periodic checks of the product should be done to insure the parts are not worn and require repair or replacement. Do not attempt to make repairs yourself. Contact your distributor if there are any questions or concerns. The product can be disposed of with household waste. F. PART LIST
The AIO cabinet requires an area of 1605 x 695 mm at least (63.2 x 27.4). Minimum height = 1985 mm (78.1). List of cushion support hooks for each panel (the panels and hook positions are marked with pencil on the panels): 1A - 2x - 2x 1B - 2x - 8x 2A 55 85 85 (85 mm of supporting length) 115
- 2x - 2x - 2x - 2x 3B - 2x - 2x - 2x - 2x 4A - 3x - 2x 4B - 1x - 3x - 2x - 3x 5A - 2x 5B - 5x - 2x
65 85 105 135
45 55 145 225
35 65
G. REQUIRED TOOLS - Crosshead screwdriver large and medium - Rubber hammer - Drill power tool that accepts the standard screw bit delivered in package. H. ASSEMBLY INSTRUCTIONS The AIO cabinet must be assembled by two persons.
55 65 85 155
35
35 85
See pictures on the next pages. Place the assembled AIO cabinet with the back against the wall and keep 20 cm ( 7,9) of free space on both sides and 120 cm ( 47,2) of free space at the front to slide out the panels.
Page 2 of 8
ORFIT INDUSTRIES N.V. ORFIT INDUSTRIES N.V. - Vertrieb Deutschland Radiotherapie ORFIT INDUSTRIES AMERICA
Vosveld 9a 2110 Wijnegem Belgium Altendorfer Kirchgasse 21 99734 Nordhausen 350 Jericho Turnpike, Suite 101 Jericho New York 11753 U.S.A
Bottom panel (Art. no. 29100-33) Side panel left (Art. no. 29100-34) Side panel right (Art. no. 29100-35) Top panel (Art. no. 29100-36) Back panel (Art. no. 29100-37) Parts Panel 1 (Art. no. 29100-38) Parts Panel 2 (Art. no. 29100-39) Parts Panel 3 (Art. no. 29100-40) Parts Panel 4 (Art. no. 29100-41) Parts Panel 5 (Art. no. 29100-42) Back panel connection bar (Art. no. 29100-43) Back panel screws (Art. no. 29100-44) Side panel screws (Art. no. 29100-45) Support handles (Art. no. 29100-46) Labels pack (Art. no. 29100-47) Screw bit (Art. no. 29100-48) Hook type 35 (Art. no. 29100-49) Hook type 45 (Art. no. 29100-50) Hook type 55 (Art. no. 29100-51) Hook type 65 (Art. no. 29100-52) Hook type 85 (Art. no. 29100-53) Hook type 95 (Art. no. 29100-54) Hook type 105 (Art. no. 29100-55) Hook type 115 (Art. no. 29100-56) Hook type 135 (Art. no. 29100-57) Hook type 145 (Art. no. 29100-58) Hook type 155 (Art. no. 29100-59) Hook type 185 (Art. no. 29100-60) Hook type 225 (Art. no. 29100-61)
- 5x - 3x
85 95
www.orfit.com
2 Cabinet Assembly
Remove the lid from the case by removing the screws from the top plate and upper row of the small side plates.
Place the bottom panel on the floor as on the above picture. Front side of the cabinet downwards.
On the bottom panel, make sure the arrows on the locking inserts are pointing towards the side panels.
Mount both side panels to the bottom panel using a rubber hammer. After that, use a screwdriver to lock (clockwise) the inserts.
Mount the top panel in the same manner. See above picture for orientation.
Page 3 of 8
ORFIT INDUSTRIES N.V. ORFIT INDUSTRIES N.V. - Vertrieb Deutschland Radiotherapie ORFIT INDUSTRIES AMERICA
Vosveld 9a 2110 Wijnegem Belgium Altendorfer Kirchgasse 21 99734 Nordhausen 350 Jericho Turnpike, Suite 101 Jericho New York 11753 U.S.A
Place the screws for both side panels in the foreseen metal inserts and tighten with a screwdriver. Mount six screws on each panel.
www.orfit.com
Tilt the cabinet in upright position and move to the desired location.
10
Mount the five part panels in correct order, starting from left (panel 1).
While one person is holding the panel, the other can mount the upper and lower rails. Push the panel fully into the cabinet.
12
Mount the black threaded support handles in the metal inserts of the five panels (26 times).
Mount the grip pole handles on panel 4A (left side of panel 4) using the included screw bit.
Page 4 of 8
ORFIT INDUSTRIES N.V. ORFIT INDUSTRIES N.V. - Vertrieb Deutschland Radiotherapie ORFIT INDUSTRIES AMERICA
Vosveld 9a 2110 Wijnegem Belgium Altendorfer Kirchgasse 21 99734 Nordhausen 350 Jericho Turnpike, Suite 101 Jericho New York 11753 U.S.A
Place both back panels with the connection bar in between. Fix both panels with the included screws (32 screws).
www.orfit.com
17
15
13
Mount the hooks with or without blocks. See the number written on the panels to know what type of hook to use. The same numbers are written on the included bags.
Panel 2B
Panel 1B
ORFIT INDUSTRIES N.V. ORFIT INDUSTRIES N.V. - Vertrieb Deutschland Radiotherapie ORFIT INDUSTRIES AMERICA
Page 5 of 8
18
Panel 2A
16
14
Panel 3A
Panel 1A
Vosveld 9a 2110 Wijnegem Belgium Altendorfer Kirchgasse 21 99734 Nordhausen 350 Jericho Turnpike, Suite 101 Jericho New York 11753 U.S.A
www.orfit.com
23
Panel 3B
21
19
Panel 5B
Panel 4B
ORFIT INDUSTRIES N.V. ORFIT INDUSTRIES N.V. - Vertrieb Deutschland Radiotherapie ORFIT INDUSTRIES AMERICA
Page 6 of 8
22
20
Vosveld 9a 2110 Wijnegem Belgium Altendorfer Kirchgasse 21 99734 Nordhausen 350 Jericho Turnpike, Suite 101 Jericho New York 11753 U.S.A
Panel 1A
Panel 5A
Panel 4A
welcome@orfit.com radiotherapie.deutschland@orfit.com sales-us@orfit.com www.orfit.com
29
Panel 2B Panel 1B
27
25
Panel 3B
ORFIT INDUSTRIES N.V. ORFIT INDUSTRIES N.V. - Vertrieb Deutschland Radiotherapie ORFIT INDUSTRIES AMERICA
Page 7 of 8
30
Panel 3A
28
Panel 2A
26
Panel 4A
Vosveld 9a 2110 Wijnegem Belgium Altendorfer Kirchgasse 21 99734 Nordhausen 350 Jericho Turnpike, Suite 101 Jericho New York 11753 U.S.A
www.orfit.com
31
32
Panel 4B
Panel 5A
33
34
Panel 5B
I. ADDITIONAL INFORMATION For additional information such as distributor contact information, product brochures, Material Safety Data Sheets and regulatory information, please visit our website www.orfit.com.
The instructions were written in accordance with the European Directive 93/42/EEC for Medical Devices. It is prohibited to make alterations to this text without prior approval from ORFIT Industries. THE AIO SOLUTION is a registered trademark of ORFIT Industries ORFIT INDUSTRIES 2009 Ref. No. 31942 29100 AIO.doc VERSION 2 - LAST UPDATE: 27/02/2009 REVISION DATE: 27/02/2011
Listed with
Page 8 of 8
ORFIT INDUSTRIES N.V. ORFIT INDUSTRIES N.V. - Vertrieb Deutschland Radiotherapie ORFIT INDUSTRIES AMERICA
Vosveld 9a 2110 Wijnegem Belgium Altendorfer Kirchgasse 21 99734 Nordhausen 350 Jericho Turnpike, Suite 101 Jericho New York 11753 U.S.A
www.orfit.com