Vous êtes sur la page 1sur 6

4/25/13 Treat Box Tutorial & Template: Peek-a-boo Box by Brenda Quintana

www.splitcoaststampers.com/resources/tutorials/peekaboobox/#?printable=true 1/6
login

join

about

help


,SQI

+EPPIV]

*SVYQ

8YX SVMEPW

7X SVI(MVIGX SV]

Peek-a-boo Box
by Brenda Quintana

Create a darling box to showcase small treats.
6XSSOLHV
One piece 4 x 9 1/2 Cardstock or
patterned paper
Scor-Pal" (or other scoring tool)
Scor-Tape" (or other strong adhesive)
1 3/8" Circle Punch
Cutting Mat
Hobby Blade
Ruler
Scissors
Medium Window Sheet
6WHSE\6WHS
Step 1
Line the piece of 4" x 9 1/2" cardstock or
paper with the short side along the top of the
Scor-Pal, then score at 1 and at 3.
4/25/13 Treat Box Tutorial & Template: Peek-a-boo Box by Brenda Quintana
www.splitcoaststampers.com/resources/tutorials/peekaboobox/#?printable=true 2/6
Step 2
Turn the cardstock so that the 9 1/2 length is
at the top of the Scor-Pal.
Score at 1, 3, 4 and 6.
Step 3
Keeping the 9 1/2 length along the top of the
Scor-Pal, shift the cardstock to the 15/16
mark (between the 7/8 and 1 mark) and
score at 8 and 10.
Note:
If you are not using a Scor-Pal, score
cardstock at 7 1/16 and 9 1/16.
4/25/13 Treat Box Tutorial & Template: Peek-a-boo Box by Brenda Quintana
www.splitcoaststampers.com/resources/tutorials/peekaboobox/#?printable=true 3/6
Step 4
Keeping your cardstock oriented as it was in
step three, cut away the pieces along the
score lines as shown.
Scored lines were traced with a black marker
for this tutorial. The solid lines indicate
additional places to cut. The tab on the far right
side is long.
Note:
Use a ruler and measure, then draw the tab
with a pencil to make sure it is centered.
Step 5
Angle cut each of the four tabs. The blue arrow
is pointing to one of the four tabs.
Step 6
Cut a centered, 1 slot with a hobby blade on
the second score line from the left.
4/25/13 Treat Box Tutorial & Template: Peek-a-boo Box by Brenda Quintana
www.splitcoaststampers.com/resources/tutorials/peekaboobox/#?printable=true 4/6
Note:
The black line indicates where the slot should
be cut. Use only one stroke of the hobby
blade; the slot needs to be narrow.
Step 7
Punch a 1 3/8 centered circle in the second
segment from the left.
Hint:
Draw an `X from corner to corner with a pencil
to help get the circle centered (the blue dotted
lines represents the pencil marks).
Step 8
Flip the cardstock over to the back side. Apply
adhesive around the circular hole as shown.
Remove the adhesive liner and place a piece of
window sheet (slightly smaller than 2 x 2)
over the circular hole.
4/25/13 Treat Box Tutorial & Template: Peek-a-boo Box by Brenda Quintana
www.splitcoaststampers.com/resources/tutorials/peekaboobox/#?printable=true 5/6
Step 9
Flip the cardstock over to the front side.
Apply adhesive on the four tabs as shown.
Step 10
Flip the cardstock over to the back side and
bend the cardstock inwards along score lines.
Step 11
Remove the adhesive liner from the four tabs
and assemble the bottom of the box.
Tuck in the circular window piece.
Close the lid of the box by slipping the tab into
the slot.
4/25/13 Treat Box Tutorial & Template: Peek-a-boo Box by Brenda Quintana
www.splitcoaststampers.com/resources/tutorials/peekaboobox/#?printable=true 6/6
Step 12
Embellish your box as desired and fill with a
little gift or a sweet treat .
<RXU7XUQ
You've seen the tutorial, now you try it! We've got a section of the gallery set aside for Peek-a-boo Box. Try this
technique, then upload your artwork to the gallery. Show us your creations!
contact us | calendar | advertise | terms of service | privacy policy | site posting rules
Visit our member companies:
Gina K. Designs Scor-Pal Stamping Bella My Favorite Things
Crafty Secrets Flourishes Unity Stamps Verve Stamps
Copyright 2003-2013, Splitcoaststampers.com

Vous aimerez peut-être aussi