Vous êtes sur la page 1sur 5

Technical Specification No.

101714
24.03.2007
Full hydraulic operated drilling rig, type VB 400, constructed and designed for rotary drilling with direct mud circulation, with reverse mud circulation by airlifting and also DTH-Hammer drilling and dry drilling.

0.0 PRINCIPAL FEATURES


Hook load gross capacity Mast length Max. torque Carrier truck Additional aggregates : 250 kN : 11.5 m : 16,000 Nm : Daimler Chrysler : Decks motor

1.0 CARRIER
1.1 Carrier truck Manufacturer Type Engine capacity Speed of vehicle Gross weight Number of axles Tyres in front Tyres in rear : Daimler Chrysler : Actros 3340 AK : 290 kW : 80 km/h : 33,000 kgs : 3 (6 x 6) : 12.00 x R 20 : 12.00 x R 20
Tel.: +49 (0) 2464-972-0 Fax: +49 (0) 2464-972-118 info@fiberdur.com www.fiberdur.com

TPR Fiberdur GmbH + Co. KG Industriepark Emil-Mayrisch D-52457 Aldenhoven

1/5

Technical Specification No. 101714


24.03.2007
1.2 Prime Mover, driven by deck engine via distributing gear to the hydraulic pumps manufacturer type power engine design cooling system : KHD Deutz : BF 6 M 1015 C : 269 kW at 2100 min-1 : in-line, 6 cylinder, 4-stroke, turbo charged : water cooled

2.0 MAST; FRAME AND FEED DEVICE


2.1 Mast Mast length Operation clearance with power swivel Hook load capacity, nominal Distance from front of mast to center of the well Mast design Mast crown Mast crown block Mast achoring Mast lifting 2.3 Main frame Sectional steel design fixed to the carrier, for the assembly of all mounted aggregates. With rigidly welded mast bock, front mast support and leader on each side to climb on the rig 2.4 Frame support Hydraulic jacks single controlled : 4 pcs.with support plates and unlocking non return valves 2.5 Feed Device, via hydraulic cylinder with rop and pulleys Pull-down force Pull-back force Rate of feed 2.6 Carriage Sectional steel frame. Connected with the rope. Guided alongside mast guide rails via encapsulated heavy-duty bearings
Tel.: +49 (0) 2464-972-0 Fax: +49 (0) 2464-972-118 info@fiberdur.com www.fiberdur.com

: 12.4 m : appx. 7.0 m : 250 kN : appx. 620 mm : high tensile steel, rectangular tubes : hydraulic collapsible : pulleys for main winch : 2 ropes : 2 hydraulic cylinders

: appx. 100 kN (dependent from the total weight) : 200 kN : 0 - 0.6 m/s

TPR Fiberdur GmbH + Co. KG Industriepark Emil-Mayrisch D-52457 Aldenhoven

2/5

Technical Specification No. 101714


24.03.2007
carriage Swing-out frame Swing-out device Locking mechanism Tilting device : hollow steel construction : hydraulic swing-out the power swivel 90 out of drill center area : hydraulic-machanical to lock the swing-out frame to the carriage : 2 hydraulical operated cylinders for tilting the power swivel in a horizontal position to pick up drill pipes or collars

3.0 POWER SWIVEL


3.1 Power Swivel (top-drive hydraulic power-head) Type Clear passage Operation torque Drill rod connection 3.2 Clamping Chuck Position Size Inserts, 1 set including : below the power swivel : to clamping 4" DP : for DP 4" DP : 16.1 R-160 : 168 mm : 1st gear 16.000 Nm by n = 0 - 60 min-1 : 2nd gear 8.000 Nm by n = 0 - 120 min-1 : for 4" DP

4.0 CLAMPING DEVICE


4.1 Clamping device, foldable, at mast base Max. free passage - when closed Max. clamping capacity Clamping jaw inserts : 250 mm : 200 kN : 1 set for 4" DP

5.0 HOISTING EQUIPMENT


5.1 Main winch Drive Max. line pull Rope diameter Rope capacity / length Brake device : hydraulic : 50 kN, : 16 mm : 120 m / 120 m : hydraulic release
Tel.: +49 (0) 2464-972-0 Fax: +49 (0) 2464-972-118 info@fiberdur.com www.fiberdur.com

TPR Fiberdur GmbH + Co. KG Industriepark Emil-Mayrisch D-52457 Aldenhoven

3/5

Technical Specification No. 101714


24.03.2007
6.0 CIRCULATION SYSTEM
6.1 Piston pump Manufacturer Type Max. flow rate Max. operating pressure Drive : Gardner Denver : 7 x 8 FY-FXX : 1500 l/min : 13 bar : hydraulic

7.0 HYDRAULIC SUPPLY; CONTROL TECHNIC


7.1 Hydraulic supply, driven by PTO, cardan shaft and distributing gear Drive capacity Oil tank, content Filtration purity classification Oil cooler : 269 kW : approx. 300 l : class 9 according to NAS 1638 : 38 kW for t = 30C 18/15 according to ISO 4406 7.2 Operation panel At the left rear side of the carrier truck, foldable, with free view to the drilling hole and machinery, Driller will stand in safe area during the drilling Working platform Instrument panel : foldable, fastened at mainframe with slip-proof floor covering : with all necessary operation levers, emergency stop, control and measuring devices including the control panel for the carrier engine with rev counter and revolution adjustment. Marking all instuments in English and Arabic Hydraulic line system consisting of pipes, hoses and fittings

8.0 OTHER DEVICES AND EQUIPMENT


8.1 Lighting Voltage Flood light : 24 V : 4 pcs. instrument panel lightning

TPR Fiberdur GmbH + Co. KG Industriepark Emil-Mayrisch D-52457 Aldenhoven

Tel.: +49 (0) 2464-972-0 Fax: +49 (0) 2464-972-118 info@fiberdur.com www.fiberdur.com

4/5

Technical Specification No. 101714


24.03.2007
8.2 Painting Carrier frame Driver cabin Rig, mast and aggregates : black : white : blue

9.0 DOCUMENTATION
Operation and maintenance manual Spare parts book : 2 x English : 2 x English

11.0 ADDITIONAL DEVICE


11.1 PRE-HEATING SYSTEMS 11.1.1 Pre-heating system for the hydraulic system All hydraulic motors and hydraulic pumps will be passed from the warm up hydraulic oil through an external circle and come back in the tank through the leckage hoses. (Same system as on the VB 500) 11.1.2 Pre-heating system for the engines An elctrical heating system will warm up the lub oil of the engines 11.2 Additional weather cabine for the driller rig mounted and removable while transport. Covering the control panel, equipped with heater. 11.3 PVC spoiler around the rig mounted on the frame, cover the chassis of the rig. The pvc spoiler is assembled on the rig frame. (Through a heater the rig can warm up with a external convector) Including direct fired oil heater, Wilms B 350 including 2 sets of spare parts .

TPR Fiberdur GmbH + Co. KG Industriepark Emil-Mayrisch D-52457 Aldenhoven

Tel.: +49 (0) 2464-972-0 Fax: +49 (0) 2464-972-118 info@fiberdur.com www.fiberdur.com

5/5

Vous aimerez peut-être aussi