Académique Documents
Professionnel Documents
Culture Documents
Channel Controller
MPT 1327 Infrastructure Components
FYLDE MICRO
Features..
Full-featured applications from a single-site to over 800 sites. Flash Programmable. Ultra compact 4 controllers in a single 1U 19 tray. No need for extra test equipment to check and set channel card levels. Soft Configuration includes built-in audio waveform monitoring
Channel cards communicate with one another via a very resilient high-speed bi-directional serial bus. This simple 2-wire
Antenna Combining System Control Interface
connection can be up to 100 metres long, useful if several racking cabinets are to be connected (on a large system) where the cabinets cannot be mounted close to one another.
IP Expansion
Channel Controllers
Repeaters
Dispatcher
SSIU PCM
PSTN / PABX
FYLDE MICRO
Technical Specification
Description:
MAXIMUM number of RF Channels per site MINIMUM number of RF Channels per site MAXIMUM Speech /NPD Call Queue Depth MAXIMUM Short Data Call Queue Depth MAXIMUM population (not limited by channel card) DEDICATED Low Forward Power Alarm DEDICATED High Reverse Power Alarm DEDICATED Line Interface Unit Alarm DEDICATED Receiver Mute Alarm UNDEDICATED Alarms BASE STATION INTERFACE connectors SIO BUS INTERFACE connector POWER connector Line Interface Unit connector Line Interface Unit Interface Line Interface Levels Line Interface Bandwidth APPROVALS (TSCC03)
Specification:
24
265mm 42mm 1u
01 31 16 1,036,800 TTL Input TTL Input TTL Input TTL Input 3 TTL Input 25 way D-type 9 way D-type Powered via BASE STATION RJ45 Socket 4 Wire 600 ohm -20dBm to +6dBm softpot adjust: 200Hz to 3400hz EMC Directive 89/336 EEC (143)
483mm
POWER REQUIREMENTS (operational) DC only per channel OPERATING TEMPERATURE RANGE Nominal Operational Voltage OPERATING HUMIDITY RANGE
Fylde Micro Ltd. 8 Avroe Crescent Blackpool Business Park, Squires Gate, Blackpool FY4 2DP England