Académique Documents
Professionnel Documents
Culture Documents
UK Training Manager / WorldSkills Expert representing UK Skills - Mech. Eng. CAD WorldSkills UK competition organiser in association with UK Skills and Semta Mech. Eng. CAD
TD
Time:
3 hours.
Given:
specified limits of accuracy. Notice the work, or production, in the upper left corner of "the drawing. Notice also that the drawing shown does not follow present ANSI/CSA standards. Be sure to make necessary changes to update the drawing. Task:
From the above drawing extract the jig body, provide appropriate 3rd angle projection views in order to fully view all required details. Produce a separate isometric drawing of the object. Provide dimensions, GDT and tolerances as deemed required. Provide a title block (of your choosing keep it simple) to properly fit the paper size(s) provided. Fill in the title block as appropriate. Use a ISO approved scale. Print out the drawing to scale on the paper you have chosen.
Use of Computer:
Measurement Information Measuring accuracy for all surfaces = 0.2 mm. Trade marks and numbering are not required. Neglect any surface irregularities on these faces.
2/4
The jig is a device used to hold a machine part (called the work or production) while it is being machined, or produced, so that all the parts when produced will be alike within the
TD
2D Detail Drawing The number of views must be sufficient to fully describe the model. Fully dimension the drawing. Dimensional and geometrical tolerances are required. Surface texture symbols are not required.
Scale = Unspecified
3D Isometric Views
Create rendered isometric views on a separate drawing drawing. Direction of views are at the competitors discretion. Scale = Unspecified
Output
2D CAD drawing
Isometric drawing
Mark allocation Extraction of the jig body orthographic views Isometric Drawing of the jig body Dimensioning, GDT and Tolerances Drawing layout, Scaling 200 points 50 points 100 points 30 Points
TD
Sheet size = A3
TD