Académique Documents
Professionnel Documents
Culture Documents
Hydraulic Excavator
Technical Data
2
E
D A
W
C
H
K P
Q
L N
U S
Z B
V G
X
E
D A
W C
H
K P
Q
L N
U S
Z B
V G
X
Dimensions
3
Digging envelope
1 with stick 1,80 m
ft m 2 with stick 2,40 m
3 with stick 3,00 m
11 4 with stick 3,70 m
35
10
30 9 Stick lengths m 1,80 2,40 3,00 3,70
8 Max. digging depth m 5,85 6,30 6,90 7,60
25 Max. reach at
7 ground level m 9,00 9,45 10,00 10,65
20 Max. dump height m 6,30 6,60 6,85 7,20
6
Max. teeth height m 9,20 9,25 9,45 9,80
5
15 Digging force kN/t 169/17,2 132/13,45 114/11,6 98/10,0
4 Breakout force kN/t 183/18,7 159/16,20 159/16,2 159/16,2
10 3
Max. breakout force kN/t 194/19,84)
2
5
1
0 0
-1
-5
-2
-10 -3
-4
-15
-5
1
-20 -6 2
3
-7
4 Operating Weight and Ground Pressure
-25
-8 Operating weight includes basic machine with 5,85 m
gooseneck boom, 2,40 m stick and 1,20 m3 bucket.
-30 -9
12 11 10 9 8 7 6 5 4 3 2 1 0m
Undercarriage HD-SL
35 30 25 20 15 10 5 0 ft Pad width mm 600 750
Weight kg 25800 26220
Ground pressure kg/cm2 0,52 0,43
Buckets
Cutting width mm 3701) 4401) 4901) 550 6202) 650 850 1050 1250 1400 1400 1550 7504) 15503) 15503) 17003)
Capacity ISO 7451 m3 0,30 0,35 0,40 0,35 0,30 0,40 0,60 0,80 1,00 1,20 1,40 1,80 0,50 1,50 1,80 2,00
Max. possible
material weight t/m3 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,5 1,2 1,8 1,8 1,5 1,2
Weight with
Liebherr teeth Z 13 kg – – – – – – – – – – – 1055 – – – 1200
Weight with
Liebherr teeth Z 16 kg – – – 580 850 630 745 830 950 1040 1065 – 1030 1080 1150 –
Weight with
Bofors teeth kg 370 390 410 – – – – – – – – – – – – –
Max. stick length for machine stability per ISO 10567:
HD-SL undercarriage 3,70 3,70 3,70 3,70 3,70 3,70 3,70 3,70 3,00 2,40 2,40 2,40 1,80 1,80 1,80 1,80
Note
When digging in highly abrasive materials, buckets must be protected by appropriate wear material.
Optional side cutters with teeth 13 or 16 increase cutting width by approx. 120 mm.
The lift capacities are stated in metric tonnes (t) on the backhoe bucket’s load hook, and can be lifted 360h on firm, level
supporting surface.
Values quoted in brackets are valid for the undercarriage when in longitudinal position.
Capacities are valid for 600 mm wide triple grouser pads.
Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated
via #).
Maximum load for the backhoe bucket’s load hook is 12 t.
Without bucket (0,90 m3*/0,80 m3), the lift capacities will increase by 860 kg*/830 kg, without bucket cylinder, link and lever
they increase by an additional 380 kg*/340 kg.
Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.
When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders and over-
load warning device according to European Standard, EN 474-5.
* values applicable only for 1,80 m stick
11
35 Stick lengths m 1,80 2,40 3,00 3,70
10
Max. digging depth m 5,85 6,30 6,90 7,60
30 9 Max. reach at
ground level m 9,45 9,90 10,45 11,10
8
25 Max. dump height m 7,80 8,35 8,75 9,30
7 Max. teeth height m 10,75 11,10 11,50 12,00
20 6 Digging force kN/t 169/17,2 132/13,45 114/11,6 98/10,0
5 Breakout force kN/t 183/18,7 159/16,20 159/16,2 159/16,2
15
4 Max. breakout force kN/t 194/19,84)
10 3
2
5
1
0 0
-1
-5
-2
-10 -3
-4
-15
-5 Operating Weight and Ground Pressure
1
-20 -6 2 Operating weight includes basic machine with 4,00 m
3 hydraulically adjustable boom, 2,40 m stick and 1,20 m3
-7 bucket.
-25 4
-8
12 11 10 9 8 7 6 5 4 3 2 1 0m Undercarriage HD-SL
Pad width mm 600 750
35 30 25 20 15 10 5 0 ft Weight kg 26800 27220
Ground pressure kg/cm2 0,54 0,44
Buckets
Cutting width mm 3701) 4401) 4901) 550 6202) 650 850 1050 1250 1400 1400 1550 7504) 15503) 15503) 17003)
Capacity ISO 7451 m3 0,30 0,35 0,40 0,35 0,30 0,40 0,60 0,80 1,00 1,20 1,40 1,80 0,50 1,50 1,80 2,00
Max. possible
material weight t/m3 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,5 1,2 1,8 1,8 1,5 1,2
Weight with
Liebherr teeth Z 13 kg – – – – – – – – – – – 1055 – – – 1200
Weight with
Liebherr teeth Z 16 kg – – – 580 850 630 745 830 950 1040 1065 – 1030 1080 1150 –
Weight with
Bofors teeth kg 370 390 410 – – – – – – – – – – – – –
Max. stick length for machine stability per ISO 10567:
HD-SL undercarriage 3,70 3,70 3,70 3,70 3,70 3,70 3,70 3,70 3,00 2,40 2,40 2,40 1,80 1,80 1,80 1,80
Note
When digging in highly abrasive materials, buckets must be protected by appropriate wear material.
Optional side cutters with teeth 13 or 16 increase cutting width by approx. 120 mm.
The lift capacities are stated in metric tonnes (t) on the backhoe bucket’s load hook, and can be lifted 360h on firm, level
supporting surface.
Values quoted in brackets are valid for the undercarriage when in longitudinal position.
Capacities are valid for 600 mm wide triple grouser pads with adjusting cylinder in optimal position.
Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated
via #).
Maximum load for the backhoe bucket’s load hook is 12 t.
Without bucket (0,90 m3*/0,80 m3), the lift capacities will increase by 860 kg*/830 kg, without bucket cylinder, link and lever
they increase by an additional 380 kg*/340 kg.
Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.
When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders and over-
load warning device according to European Standard, EN 474-5.
* values applicable only for 1,80 m stick
0 0
-1
-5
-2
-10 -3
-4
1
-15
-5 2
3
-20 -6 4 Operating Weight and Ground Pressure
5 Operating weight includes basic machine with 4,00 m
-7
6 mechanically adjustable boom, 2,40 m stick and 1,20 m3
-25 bucket.
-8
11 10 9 8 7 6 5 4 3 2 1 0m
Undercarriage HD-SL
35 30 25 20 15 10 5 0 ft Pad width mm 600 750
Weight kg 26200 26620
Ground pressure kg/cm2 0,53 0,43
Buckets
Cutting width mm 3701) 4401) 4901) 550 6202) 650 850 1050 1250 1400 1400 1550 7504) 15503) 15503) 17003)
Capacity ISO 7451 m3 0,30 0,35 0,40 0,35 0,30 0,40 0,60 0,80 1,00 1,20 1,40 1,80 0,50 1,50 1,80 2,00
Max. possible
material weight t/m3 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,5 1,2 1,8 1,8 1,5 1,2
Weight with
Liebherr teeth Z 13 kg – – – – – – – – – – – 1055 – – – 1200
Weight with
Liebherr teeth Z 16 kg – – – 580 850 630 745 830 950 1040 1065 – 1030 1080 1150 –
Weight with
Bofors teeth kg 370 390 410 – – – – – – – – – – – – –
Max. stick length for machine stability per ISO 10567:
HD-SL undercarriage 3,70 3,70 3,70 3,70 3,70 3,70 3,70 3,70 3,00 2,40 2,40 2,40 1,80 1,80 1,80 1,80
Note
When digging in highly abrasive materials, buckets must be protected by appropriate wear material.
Optional side cutters with teeth 13 or 16 increase cutting width by approx. 120 mm.
The lift capacities are stated in metric tonnes (t) on the backhoe bucket’s load hook, and can be lifted 360h on firm, level
supporting surface.
Values quoted in brackets are valid for the undercarriage when in longitudinal position.
Capacities are valid for 600 mm wide triple grouser pads.
Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated
via #).
Maximum load for the backhoe bucket’s load hook is 12 t.
Without bucket (0,90 m3*/0,80 m3), the lift capacities will increase by 860 kg*/830 kg, without bucket cylinder, link and lever
they increase by an additional 380 kg*/340 kg.
Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.
When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders and over-
load warning device according to European Standard, EN 474-5.
* values applicable only for 1,80 m stick
10 3
Stick lengths m 1,80 2,40 3,00 3,70
2 Max. digging depth m 5,40 5,90 6,50 7,20
5 Max. reach at
1 ground level m 9,00 9,40 9,90 10,60
0 0
Max. dump height m 6,25 6,60 6,80 7,10
Max. teeth height m 9,10 9,20 9,35 9,70
-1 1
-5 2 Digging force kN/t 156/15,9 128/13,0 110/11,2 95/9,7
-2
3
Breakout force kN/t 166/16,9 159/16,2 159/16,2 159/16,2
-10 -3 4 Max. breakout force kN/t 192/19,64)
-4
-15
-5
5
6
-20 -6
7
-7 8
-25
-8
11 10 9 8 7 6 5 4 3 2 1 0 m
35 30 25 20 15 10 5 0 ft
2400
Undercarriage HD-SL
Pad width mm 600 750
51,5° Weight kg 26200 26620
Ground pressure kg/cm2 0,53 0,43
Buckets
Cutting width mm 3701) 4401) 4901) 550 6202) 650 850 1050 1250 1400 1400 1550 7504) 15503) 15503) 17003)
Capacity ISO 7451 m3 0,30 0,35 0,40 0,35 0,30 0,40 0,60 0,80 1,00 1,20 1,40 1,80 0,50 1,50 1,80 2,00
Max. possible
material weight t/m3 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,5 1,2 1,8 1,8 1,5 1,2
Weight with
Liebherr teeth Z 13 kg – – – – – – – – – – – 1055 – – – 1200
Weight with
Liebherr teeth Z 16 kg – – – 580 850 630 745 830 950 1040 1065 – 1030 1080 1150 –
Weight with
Bofors teeth kg 370 390 410 – – – – – – – – – – – – –
Max. stick length for machine stability per ISO 10567:
HD-SL undercarriage 3,70 3,70 3,70 3,70 3,70 3,70 3,70 3,70 3,00 2,40 2,40 2,40 1,80 1,80 1,80 1,80
1) Bucket with ejector and Bofors teeth
2) Ripper bucket with teeth size Z 16 P
3) Bucket R 934 litronic`
4) Ripper bucket with teeth size Z 20 P from R 934 litronic`
Note
When digging in highly abrasive materials, buckets must be protected by appropriate wear material.
Optional side cutters with teeth 13 or 16 increase cutting width by approx. 120 mm.
The lift capacities are stated in metric tonnes (t) on the backhoe bucket’s load hook, and can be lifted 360h on firm, level
supporting surface.
Values quoted in brackets are valid for the undercarriage when in longitudinal position.
Capacities are valid for 600 mm wide triple grouser pads.
Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated
via #).
Maximum load for the backhoe bucket’s load hook is 12 t.
Without bucket (0,90 m3*/0,80 m3), the lift capacities will increase by 860 kg*/830 kg, without bucket cylinder, link and lever
they increase by an additional 380 kg*/340 kg.
Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.
When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders and over-
load warning device according to European Standard, EN 474-5.
* values applicable only for 1,80 m stick
2
5
1
0 0
-1
-5
-2
-10 -3
-4
-15 1
-5 2
-20 -6
3 Operating Weight and Ground Pressure
4
-7 Operating weight includes basic machine with 6,00 m
-25 straight gooseneck boom, 2,40 m stick and 1,20 m3 bucket.
-8
12 11 10 9 8 7 6 5 4 3 2 1 0 m
Undercarriage HD-SL
Pad width mm 600 750
35 30 25 20 15 10 5 0 ft
Weight kg 25800 26620
Ground pressure kg/cm2 0,52 0,43
Buckets
Cutting width mm 3701) 4401) 4901) 550 6202) 650 850 1050 1250 1400 1400 1550 7504) 15503) 15503) 17003)
Capacity ISO 7451 m3 0,30 0,35 0,40 0,35 0,30 0,40 0,60 0,80 1,00 1,20 1,40 1,80 0,50 1,50 1,80 2,00
Max. possible
material weight t/m3 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,5 1,2 1,8 1,8 1,5 1,2
Weight with
Liebherr teeth Z 13 kg – – – – – – – – – – – 1055 – – – 1200
Weight with
Liebherr teeth Z 16 kg – – – 580 850 630 745 830 950 1040 1065 – 1030 1080 1150 –
Weight with
Bofors teeth kg 370 390 410 – – – – – – – – – – – – –
Max. stick length for machine stability per ISO 10567:
HD-SL undercarriage 3,70 3,70 3,70 3,70 3,70 3,70 3,70 3,70 3,00 2,40 2,40 2,40 1,80 1,80 1,80 1,80
Note
When digging in highly abrasive materials, buckets must be protected by appropriate wear material.
Optional side cutters with teeth 13 or 16 increase cutting width by approx. 120 mm.
The lift capacities are stated in metric tonnes (t) on the backhoe bucket’s load hook, and can be lifted 360h on firm, level
supporting surface.
Values quoted in brackets are valid for the undercarriage when in longitudinal position.
Capacities are valid for 600 mm wide triple grouser pads.
Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated
via #).
Maximum load for the backhoe bucket’s load hook is 12 t.
Without bucket (0,90 m3*/0,80 m3), the lift capacities will increase by 860 kg*/830 kg, without bucket cylinder, link and lever
they increase by an additional 380 kg*/340 kg.
Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.
When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders and over-
load warning device according to European Standard, EN 474-5.
* values applicable only for 1,80 m stick
Uppercarriage
x Engine hood with lift help x Electric fuel tank filler pump
x Lockable tool box x Foot pedal swing positioning brake
x Handrails, non slip surfaces x Extended tool kit
x Tool Kit x Customized colors
x Maintenance-free swing brake lock
x Maintenance-free HD-batteries
LFR/SP 8410967-2-02.02 Printed in Germany by Eberl. Illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 9248.
x Sound insulation
x Mechanical swing lock upper/lower
Hydraulics
x Electronic pump regulation x Additional hydraulic circuits
x Stepless work mode selector x Bio-degradable hydr. oil
x Pressure storage for controlled lowering of attachments x Filter for secondary circuit
with engine turned off
x Hydraulic tank shut-off valve
x LSC control system
x Filter with integrated fine filter area (5 mm)
x Pressure test ports
Engine
x Direct injection x Engine cold starting aid
x Turbo charger
x Dry-type air cleaner w/pre-cleaner, main and safety
element
x Sensor controlled engine idling
Operator’s Cab
x Deep drawn cab shell components x Removable lower section of front window
x All tinted windows x AM/FM stereo radio w/cassette
x Door with sliding, window x Air power seat adjustment
x All-round adjustable roof flap x Warning beacon
x Rain protective shade for front window x Additional flood lights
x Washer and wiper x Ventilator
x 6-way adjustable cloth suspension seat x Armored glass
x Seat and consoles independently adjustable
x Removable handle for travel pedals
x Air conditioner
x Coat hook
x Dome light
x Sun visor
x Inside rear mirrors
x Radio installation prep-kit
x Cigar lighter and ashtray
x Removable custom floor mat
x Storage and Literature tray
x Digital instrumentation
x Digital instruments for oil temp. engine RPM and oil
pressure
x Digital hour meter visible from outside
Attachment
x Cylinders with shock absorbers x Safety check valves for hoist cylinder, high mounted
x Sealed pivots x Overload warning device
x Centralized lube points x Hydr. or mechanical quick change coupler
x SAE split flanges on all high pressure lines x Liebherr line of clams and grapples
x Safety hook on bucket x Quick disconnect hose couplers
x Y sealant between bucket and stick x Special application buckets
x Work light on boom x Hydr. lines, on stick, for clam operation
x Two-way selector valve for bucket/clam
x Bucket link holder f’/clam application
x Customized colors
Options and/or special attachments, supplied by vendors other than Liebherr, are only to be
installed with the knowledge and approval of Liebherr to retain warranty.
LIEBHERR-FRANCE S.A. 2, Avenue Joseph Rey, B.P. 287, F-68005 Colmar-Cedex, ç 03 89 21 35 10, Fax 03 89 21 37 93
www.liebherr.com, E-Mail: info@lfr.liebherr.com
With compliments: