Vous êtes sur la page 1sur 4

Thick Film Chip Resistors NRCH Series

FEATURES
• HIGH VOLTAGE (500V & 1500V) CHIP RESISTORS RoHS
• EIA STANDARD SIZING 1206 and 2010 Compliant
• AVAILABLE IN TAPE/REEL FOR AUTOMATIC MOUNTING includes all homogeneous materials
• BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
*See Part Number System for Details

SPECIFICATIONS
Max. *1 Max. *2 Resistance Temperature Resistance Operating
EIA Power Rating Resistance
Type Working Overload Tolerance Coefficient Range Temperature
Size at 70°C Value
Voltage Voltage Code (ppm/°C) (Ω) Range
±1%(F) ±200 47Ω ~ 10MΩ E-24 & E-96
NRCH12 1206 1/4 (0.25) W 500V 1000V ±2%(G) ±200 47Ω ~ 10MΩ E-24
-55°C ~ +125°C
±5%(J) ±200 47Ω ~ 22MΩ E-24
NRCH50 2010 1/2 (0.50) W 1500V 3000V ±5(J) ±200 47Ω ~ 22MΩ E-24

Note *1 - Maximum allowable continuous Working Voltage Power Derating Curve: For operation above 70oC,
for all resistors is the lower of the two values: power rating must be derated according to the
“Maximum Working Voltage” as specified above following chart:
(or)
100
Power rating (Watts) x Resistance (Ohms)
80
Note *2 - Maximum allowable Overload voltage is two times the
RATE (%)

Maximum Working Voltage (see Note *1 above). 60

40

20

0
-20 20 60 100
70 155 oC

PART NUMBER SYSTEM (E-24 VALUES, 2% & 5% TOL.) PART NUMBER SYSTEM (E-24 & E-96 VALUES, 1% TOL.)
NRCH12 J 106 TR F NRCH12 F 1212 TR F

RoHS compliant RoHS compliant


Tape & Reel Packaging Tape & Reel Packaging
Resistance Code: First 2 figures are significant, Resistance Code: First 3 figures are significant,
3rd digit is the multiplier, “R” 4th digit is the multiplier, “R”
indicates a decimal point. indicates a decimal point.
Tolerance Code: G=2%, J=5% Tolerance Code: F=1%
Series and Size Series and Size

CONSTRUCTION

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com


10
Thick Film Chip Resistors NRCH Series

DIMENSIONS (mm)
Type EIA Size L W H T t
NRCH12 1206 3.10 ± 0.20 1.55 ± 0.10 0.55 ± 0.10 0.40 ± 0.25 0.40 ± 0.20
NRCH50 2010 5.00 ± 0.20 2.50 ± 0.20 0.55 ± 0.10 0.40 ± 0.25 0.50 ± 0.25

MARKING EXAMPLES
1K ohm (2% & 5% tol.)
Part Marked 102

1K ohm (1% tol.)


Part Marked = 1001

STANDARD E-24 and E-96 VALUES


E-24 E-96
Value Value Value Value Value
100 100 102 105 107
110 110 113 115 118
120 121 124 127 130
130 133 137 140 143
150 147 150 154 158
160 162 165 169 174
180 178 182 187 191
200 196 200 205 210
220 215 221 226 232
240 237 243 249 255
270 261 267 274 280
300 287 294 301 309
330 316 324 332 340
360 348 357 365 374
390 383 392 402 412
430 422 432 442 453
470 464 475 487 499
510 511 523 536 549
560 562 576 590 604
620 619 634 649 665
680 681 698 715 732
750 750 768 787 806
820 825 845 866 887
910 909 931 953 976

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com


11
Thick Film Chip Resistors NRCH Series

Specification
Item Test Method
NRCH12 NRCH50
Temperature Coefficient JIS-C5202-5.2
±200ppm
of Resistance +25°C ~ +125°C
JIS-C-5202-5.5
1% tol. parts: ΔR ±1% + 0.05Ω
Short Time Overload NRCH12 = 2.5 x Rated Voltage for 5 seconds
2%, 5% tol. parts: ΔR ±2% + 0.05Ω
NRCH20 = 2.0 x Rated Voltage for 2 seconds
Dielectric Withstanding JIS-C-5202-5.7
No abnormailities, flashover, breakdown or burning.
Voltage 500Vac for 1 minute
JIS-C-5202-5.7
Insulation Resistance > 1 GΩ
100V for 1 minute
JIS-C5202-7.10
1% parts: ΔR ±1% + 0.05Ω
Load Life 1000 hours at 70°C and rated power 5% parts: ΔR ±5% + 0.1Ω
2%, 5% parts: ΔR ±3% + 0.05Ω
Cycle: 1.5 hours "ON", 0.5 hours "OFF"
MIL-STD-202F, Method 106F, IEC 60115-1 4.24.2 1% parts: ΔR ±0.5% + 0.05Ω
Moisture Resistance
42 cycles (1000 hours total) 2%, 5% parts: ΔR ±2% + 0.05Ω
JIS-C5202-7.2 1% parts: ΔR ±1% + 0.05Ω
Resistance to Dry Heat
155°C ±5°C for 96 hours ±4 hours 2%, 5% parts: ΔR ±3% + 0.05Ω
MIL-R-55342DR Para 4.7.4
Low Temperature 1% parts: ΔR ±0.5% + 0.05Ω
-65 (+0, -5)°C for 1 hour, rated voltage applied
Operation 2%, 5% parts: ΔR ±1% + 0.05Ω
for 45 (+5, -0) minutes
JIS-C5202-7.4 1% parts: ΔR ±0.5% + 0.05Ω
Temperature Cycling
-55°C (30 minutes) / +125°C (30 minutes) 5 cycles 2%. 5% parts: ΔR ±1% + 0.05Ω
+245°C ±5°C, 2 ± 0.5 seconds dwell At least 95% of surface area of termination shall be covered
Solderability
Solder: Sn 96.5%/Ag 3%/Cu 0.5% with new solder
Resistance to JIS-C5202-6.10 1% parts: ΔR ±0.5% + 0.05Ω
Soldering Heat +270 ±5°C for 10 ± 1 second 2%, 5% parts: ΔR ±1% + 0.05Ω
JIS-C5202-6.1 1%: ΔR ±0.5% + 0.05Ω
Bending Test
3mm deflection 2%, 5% parts: ΔR ±1% + 0.05Ω

PAPER TAPE DIMENSIONS (mm)


Type EIA Size A B D E F Po P1 P2 T W
+0.1
NRCH12 1206 2.0 ±0.15 3.6 ±0.2 1.5 -0
1.75 ± 0.1 3.5 ± 0.05 4.0 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 0.84 ± 0.1 8.0 ± 0.2

P0
D
E

Cover tape A F W

T P2
P1

EMBOSSED PLASTIC TAPE DIMENSIONS (mm)


Type EIA Size A B D E F Po P1 P2 T W
+0.1
NRCH50 2010 2.8 ± 0.2 5.3 ± 0.2 1.5 -0
1.75 ± 0.1 5.5 ± 0.05 4.0 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 0.85 ± 0.15 12.0 ± 0.2

P0
D
E

A F W

T Cover tape P2
P1

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com


12
Thick Film Chip Resistors NRCH Series
REEL QUANTITY & DIMENSIONS (mm)
Type EIA Size A B C W T Qty
NRCH12 1206 9.0 ± 1.0 11.5 ± 1.0 5,000
178 ± 2.0 60.0 ± 1.0 13.0 ± 1.0
NRCH50 2010 13.0 ± 1.0 15.5 ± 1.0 4,000
W

A C B

T
RECOMMEND LAND PATTERN DIMENSIONS (mm)
Type EIA Size a b c
NRCH12 1206 2.0 ~ 2.4 4.4 ~ 5.0 1.6 ~ 1.8

NRCH50 2010 3.3 ~ 3.7 5.7 ~ 6.5 2.3 ~ 3.5

c
a

REFLOW SOLDERING TEMPERATURE PROFILE


300

260 Peak Temperature 250°C +5 -0 5 sec. max.

230
200

150

100 120 Sec. Time above 230°C


150°C ~ 180°C 40 sec. max.

50

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com


13

Vous aimerez peut-être aussi