Académique Documents
Professionnel Documents
Culture Documents
AUO Model Name: T370XW02 V1 Customer Part No/Project Name: Customer Signature Date AUO
Approved By: PL Chen Reviewed By: Hong-Jye Hong Prepared By: Andrew Liang
Date
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
0/27
Product Specifications 37.0 WXGA Color TFT-LCD Module Model Name: T370XW02 V.1
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
1/27
Contents
No
COVER CONTENTS RECORD OF REVISIONS 1 2 3 GENERAL DESCRIPTION ABSOLUTE MAXIMUM RATINGS ELECTRICAL SPECIFICATIONS
ITEM
ELECTRICAL CHARACTREISTICS INTERFACE CONNECTIONS INPUT TIMING SPECIFICATIONS SIGNAL TIMING WAVEFORMS COLOR INPUT DATA REFERNECE POWER SEQUENCE OPTICAL SFECIFICATIONS MECHANICAL CHARACTERISTICS RELIABLITY INTERNATIONAL STANDARDS SAFETY EMC PACKING PRECAUTIONS
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
2/27
Record of Revision
Version 0.0 0.0 0.1 Date Mar.16, 06 Mar.22, 06 May.09, 06 No First Draft Update BL Power consumption in P.6 & P.9 Update LVDS SEL P.9 Update 2D Drawing P.21 P.22 Update Inverter Power P.6 P.10 0.2 0.3 0.4 May.24, 06 Jun.15,06 Jun.29,06 Update Input Timing Spec P.12 Update Backlight Power P.10 Update P.6 Inrush Current Update P.7 LVDS Connector Update P.30 MPRT data Description Remark
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
3/27
1. General Description
This specification applies to the 37.0 inch Color TFT-LCD Module T370XW02 V1. This LCD module has a TFT active matrix type liquid crystal panel 1366x768 pixels, and diagonal size of 37.0 inch. This module supports 1366x768 XGA-Wide mode (Non-interlace). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot. The T370XW02 V1 has been designed to apply the 8-bit 2 channel LVDS interface to support 120Hz signal operation. It is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important.
* General Information
Items
Active Screen Size Display Area Outline Dimension Driver Element Display Colors Number of Pixels Pixel Arrangement Pixel pitch Surface Treatment Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
Specification
37.02 819.6 (H) x 460.8(V) 877.0(H) x 514.6(V) x 54.7(D) a-Si TFT active matrix 16.7M 1366x768 RGB vertical stripe 0.6(H) x 0.6(W) Hard-Coating (3H), Anti-Glare
Unit
Inches mm mm
Note
With inverter
Colors Pixel
4/27
Note 1 : Duration = 50msec Note 2 : Maximum Wet-Bulb should be 39 and No condensation. The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures greater than 40, the wet bulb temperature must not exceed 39 .
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
5/27
3. Electrical Specification
3-1 Electrical Characteristics
The T370XW02 V1 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second input which powers the CCFL, is typically generated by an inverter. Value Min. LCD Power Supply Input Voltage Power Supply Input Current Power Consumption Inrush Current Backlight Power Consumption Lamp Life Time Note : 1. VLCD ILCD PC IRUSH 10.8 50000 12.0 0.97 11.6 4 130 60,000 13.2 1.16 14 6 149.5 V. A. W A W hr 3 1 1 2 Typ. Max. Unit Note
Parameter
Symbol
3.
4.
The relative humidity must not exceed 80% non-condensing at temperatures of 40 or less. At temperatures greater than 40, the wet bulb temperature must not exceed 39 . When operate at low temperatures, the brightness of CCFL will drop and the life time of CCFL will be reduced.
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
6/27
Note: 1. All GND (ground) pins should be connected together and should also be connected to the LCDs metal frame. All Vcc (power input) pins should be connected together. 2. High: NS mode Low/Open: JEIDA mode Do not connect NC pins. Connecting these pins to GND or any voltage is not allowed.
3.
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
7/27
2. LVDS_SEL = Low/Open
JEIDA Mode
u u
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
8/27
No
Item
Symbol VBL IBL PBL IBL PBL IRUSH On Off BLON BLON Vdim Vdim FBLD Max
Test Condition
Min 21.6
Typ 24 5.96
Unit V A W A W A V V V V Hz % %
Note
1 Power Input Voltage 2 Power Input Current (Turn on) 3 Power Consumption (Turn on) 4 Power Input Current (stable) 5 Power Consumption (stable) 6 Inrush Current 7 On/Off Coltrol Voltage
VDD=24V,DimMax VDD=24V,DimMax VDD=24V,DimMax VDD=24V,DimMax VDD=24V,DimMax VDD=24V VDD=24V VDD=24V VDD=24V VDD=24V
*2 *3
2 0 150 -
3.3 0 100 30
Max Min
*1
Duty Ratio
Ta=252 1: Connection of brightness control terminal Bright control by the voltage 0V : Min. brightness 3.3V : Max. brightness 2: Power supply rising time : min 20 ms 3: BLON Logic H(5V) : Back Light ON L (0V) : Back Light OFF OPEN : Back Light OFF
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
9/27
3.
Input specification CN2 : S10B-PH-SM3-TB(JST) Feature +24V +24V +24V +24V +24V GND GND GND GND GND Brightness control signal input No Signal Name 1 2 3 4 5 6 7 8 9 10 VBL VBL VBL VBL VBL GND GND GND GND GND Feature +24V +24V +24V +24V +24V GND GND GND GND GND
CN1 : S14B-PH-SM3-TB(JST) No Signal Name 1 2 3 4 5 6 7 8 9 10 VBL VBL VBL VBL VBL GND GND GND GND GND
11
Vdim
12
BL On/Off
5V : On, 0V : Off External PWM Dimming Control (GND : BL shutdown) High(2~5V) : internal PWM (pin 11) Low(0~0.8) : external PWM (pin13)
13 E-PWM Dim
14
SEL pin
Setting
VDIM (pin 11) E-PWM (pin13)
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
10/27
Signal Horizontal
100.0 KHz
Signal Horizontal
1.) Display position is specific by the rise of DE signal only. Horizontal display position is specified by the rising edge of 1st CLK after the rise of 1st DE, is displayed on the left edge of the screen. The 1st data corresponding to one horizontal line after the rise the of 1st DE is displayed at the top line of screen. 2.) If a period of DE High is less than 1366 DCLK or less than 768 lines, the rest of the screen displays black. 3.) The display position does not fit to the screen if a period of DE High and the effective data period do not synchronize with each other.
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
11/27
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
12/27
COLOR
DATA REFERENCE
Input Color Data
Color MSB
BLUE LSB
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black Red(255) Green(255) Basic Color Blue(255) Cyan Magenta Yellow White RED(000) RED(001) RED ---RED(254) RED(255) 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 1 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0
GREEN(000) 0 GREEN(001) 0 GREEN ---GREEN(254) 0 GREEN(255) 0 BLUE(000) BLUE(001) BLUE ------BLUE(254) BLUE(255) 0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
1 1 0 0
1 1 0 0
1 1 0 0
1 1 0 0
1 1 0 0
1 1 0 0
1 1 0 0
0 1 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 1
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
1 1
1 1
1 1
1 1
1 1
1 1
1 1
0 1
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
13/27
90%
90%
10%
10%
t1
t2
t5
t6
t7
t3
t4
Lamp ON Backlight
Units us ms ms ms ms ms s
(1) Apply the lamp voltage within the LCD operation range. When the back-light turns on before the LCD operation or the LCD turns off before the back-light turns off, the display may momentarily become abnormal screen.
Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. No Reproduction and Redistribution Allowed
14/25
24V(typ.)
90%
VDDB
T1
T2
T5
VDIM
(VBLON)
T3
T4
condition
T6
for
Inverter
Parameter Min. T1 T2 T3 T4 T5 T6 20 50 0 0 0 -
Units
ms ms ms ms ms ms
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
15/27
4. Optical Specification
Optical characteristics are determined after the unit has been ON and stable for approximately 30 minutes in a dark environment at 25. The values specified are at an approximate distance 50cm from the LCD surface at a viewing angle of and equal to 0. Fig.1 1 presents additional information concerning the measurement equipment and method.
Parameter
Contrast Ratio Surface Luminance, white Luminance Variation Response Time Rise Time
Decay Time
Symbol
Min. CR LWH WHITE TrR TrD T RX RY 9p 800 400 -
Values
Typ. 1000 500 15 5 6 0.640 0.330 0.290 Typ 0.03 0.600 0.150 0.060 0.280 0.290 Typ +0.03 Max. 1.3 18 7
Units
Notes
1 cd/ 2 3 ms ms ms 5 4
GX GY
BLUE
BX BY
WHITE
WX WY
Viewing Angle x axis, right(=0) x axis, left(=180) y axis, up(=90) y axis, down (=0) r l u d 89 89 89 89 Degree 6
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
16/27
Note: 1. Contrast Ratio (CR) is defined mathematically as: Surface Luminance with all white pixels Contrast Ratio= Surface Luminance with all black pixels
2.
Surface luminance is luminance value at point 1 across the LCD surface 50cm from the surface with all pixels displaying white. From more information see FIG 2.
3.
FIG. 2 Luminance
H/2
V/2
H/2
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
17/27
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
Photodetector Output
L0,15,L31, .L255
Time
TrR
18/27
5. Mechanical Characteristics
The contents provide general mechanical characteristics for the model T370XW02 V1. In addition the figures in the next page are detailed mechanical drawing of the LCD. Horizontal Outline Dimension Vertical Depth Bezel Opening Area Horizontal Vertical Display Active Area Horizontal Vertical Weight Surface Treatment 9.8Kg (Typ.) Hard-Coating (3H), Anti-Glare, 877.0 mm 514.6 mm 54.7 mm(with inverter) 827.8 mm 469.4 mm 819.6 mm 460.8 mm
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
19/27
2-D Drawing
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
20/27
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
21/27
6. Reliability
Environment test condition No 1 2 3 4 5 Test Item High temperature storage test Low temperature storage test High temperature operation test Low temperature operation test Vibration test (non-operating) Ta=60 Ta= -20 Ta=50 Ta=0 50%RH Condition 240h 240h 240h 240h
Wave form: random Vibration level: 1.5G RMS Bandwidth: 10-500Hz, Duration: X, Y, Z 20min One time each direction Shock level: 50G Waveform: half since wave, 11ms Direction: X, Y, Z One time each direction Wave form: random Vibration level: 1.5G RMS Bandwidth: 10-500Hz, Duration: X, Y, Z 30min One time each direction Height: 53.3cm 1 corner, 3 edges, 6 surfaces (ASTMD4169-I)
Result Evaluation Criteria There should be no change which might affect the practical display function when the display quality test is conducted under normal operating condition.
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
22/27
7. International Standard
7-1. Safety
(1) UL1950 Third Edition, Underwriters Laboratories, Inc. Jan. 28, 1995 Standard for Safety of Information Technology Equipment Including electrical Business Equipment. (2) CAN/CSA C22.2 No. 950-95/60950 Third Edition, Canadian Standards Association, Standard for Safety of Information Technology Equipment Including Electrical Business Equipment. (3) EN60950 : 1992+A2: 1993+A2: 1993+C3: 1995+A4: 1997+A11: 1997 IEC 950: 1991+A1: 1992+A2: 1993+C3: 1995+A4:1996 European Committee for Electrotechnical Standardization (CENELEC) EUROPEAN STANDARD for Safety of Information Technology Equipment Including Electrical Business Equipment.
7-2. EMC
a) ANSI C63.4 Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electrical Equipment in the Range of 9kHz to 40GHz. American National standards Institute (ANSI), 1992 b) C.I.S.P.R Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment. International Special committee on Radio Interference. c) EN 55022 Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment. European Committee for Electrotechnical Standardization. (CENELEC), 1998
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
23/27
T370XW02
TW5A031 00039- ZMA TW5A031: Production Lot 00039: Panel serial number ZMA:AUO internal code 2 Manufactured 05/44: 2005 week 44 Carton Label :100mm * 120mm
2 1 3 100
Carton Size
965(L)mm*280(W)mm*662(H)mm
Pallet Size
1130(L)mm*980(W)mm*123(H)mm Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed T370XW02 V.1 Ver0.4 24/27
Module
3pcs Modules
Cushion set
Cushion down
H Tape
3pcs / 1 carton
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed T370XW02 V.1 Ver0.4 25/27
By Air : 1 pallet + 4 box 2 layers ( 8*3=24 pcs module) By Sea : 1 pallet + 4 box 3 layers (12*3=36 pcs module)
Moisture-proof film
Label
PET band
Corner angle
Pallet
9. PRECAUTIONS
Please pay attention to the followings when you use this TFT LCD module.
26/27
9-5 STORAGE
When storing modules as spares for a long time, the following precautions are necessary. (1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature between 5 and 35 at normal humidity. (2) The polarizer surface should not come in contact with any other object. It is recommended that they be stored in the container in which they were shipped.
(3) You can remove the glue easily. When the glue remains on the Bezel or its vestige is recognized, please
wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane.
Copyright AU Optronics, Inc. Jun, 2005 All Rights Reserved. No Reproduction and Redistribution Allowed
27/27