Académique Documents
Professionnel Documents
Culture Documents
Find your Manfrotto quick release number and convert it to the Bogen part number. Not all Manfrotto quick releases listed are available at this time.
Manfrotto 030ARCH-14 030ARCH-38 030L 030UNIV 030VHS 030-14 030-38 030HAS 116PT 130-14 130-38
3041 3042
Bogen 3049 "Hexagonal" Quick release plate with 1/4 20 screw. Fits Bogen tripod models 3038, 3039, 3047, 3055S, 3055, 3063, 488RC0 and other Bogen heads. Available in 1/4 for most 35mm and most digital cameras. Large easy to grip thumb screw and locking wheel easy to put on and off repeatedly. and locking collar only that are sold separately.
make this quick release plate You can buy the thumb screw (shown left) as replacement parts
Bogen 3048 "Hexagonal" Quick release plate with 3/8 screw. Fits Bogen tripod models 3038, 3039, 3047, 3055S, 3055, 3063, 488RC0 and other Bogen heads. Available in 3/8 for many larger and Hasselblad cameras. Looks the same as above except with a 3/8 size screw. You can buy the thumb screw and locking collar only as replacement parts that are sold separately in the pull down menu below.
Buy Now
Bogen 3159 "Hexagonal" Quick release plate with 1/4 screw. Fits Bogen tripod models 3038, 3039, 3047, 3055S, 3055, 3063, 3130, 488RC0 and other Bogen heads. Includes the VHS locator pin for video cameras that keep the camera from rotating while pointed up, down or at angles.
Buy Now
Bogen 3157N Quick release plate with 1/4 20 screw. Fits 3Bogen tripod models 030, 3030G, 3039, 3130, 3130G, 3262QR, 3265, 3265G, 3410, 3413QR, 3437, 390RCNAT, 390RC2, 468RC2, 484RC2, 486RC2, 488RC2, and other Bogen heads. Available in 1/4 for most 35mm and most digital cameras. Shown to the right. Bogen 3157AN Quick release plate with 3/8 screw. Fits Bogen tripod models 3030, 3030G, 3039, 3130, 3130G, 3262QR, 3265, 3265G, 3410, 3413QR, 3437, 390RCNAT, 390RC2, 468RC2, 484RC2, 486RC2, 488RC2, and other Bogen heads. Available in 3/8 for many larger and Hasselblad cameras.
Buy Now
Bogen 3157NR Architectural Quick release plate with 1/4 20 screw. Anti-twist feature assures consistent alignment of the camera on the tripod, and no rotational movement of the camera on the quick release plate. Even in Vertical position and upside down positions. Fits Bogen tripod models 3030, 3030G, 3039, 3130, 3130G, 3262QR, 3265, 3265G, 3410, 3413QR, 3437, 390RCNAT, 390RC2, 468RC2, 484RC2, 486RC2, 488RC2, and other Bogen heads using the 3157 style rectangular quick release plate. Available in 1/4 for most 35mm and most digital cameras. Shown to the right.
Buy Now
Bogen 3157 replacement Thumb screws Choose from either 1/4 inch or larger 3/8 size. Use the 1/4 on most USA 35mm and digital cameras. 3/8 size is for many European and Medium Format cameras.
Buy Now
Bogen 3271 Quick release plate supplied with 1/4 20 thread and 3/8 screws and video anti-twist alignment pin. Fits Bogen tripod models 3275, 329RC4, 405, 468RC4, 488RC4, 490RC4 Bogen video heads.
Buy Now
Bogen 3433PL Quick release plate with 1/4 20 thread and 3/8 screws and video anti-twist alignment pin. Cast aluminum plate with rubber gripper pads.
Fits Bogen tripod models 3433 and 501 Bogen video heads.
Buy Now
Buy Now
Bogen 384 Quick release plate supplied with 1/4 20 threaded screw and anti-twist alignment brace for almost any 35mm or digital. Fits 384 Bogen heads.
Buy Now
Buy Now