Académique Documents
Professionnel Documents
Culture Documents
Krone Filter GmbH Herbert-Ludwig-Str. 12-14 28832 Achim Tel: +49 (0)4202 97 69 23 Fax: +49 (0)4202 97 69 27
info@krone-filter.com www.krone-filter.com
Installation
The filter is installed in pipes by means of flanges. Ensure that the standard version of the filter is installed vertically and a mechanically tension-free manner without additional loads. The medium must flow in the direction specified on the housing. Incorrect installation can cause separator malfunctions. The contaminant outlet pipe must be laid with no pressure, without cross section reduction, without an ascending gradient, and, if possible with a descending gradient.
01
09/2008 by Krone Filter GmbH, subject to change
Technical data
Standard version Filter insert Filter catch Venting device Drain unit Connections Materials: Housing Seals Perforated plate/mesh Cleaning nozzle Drain valve Electric gear motor Control GGG-40 NBR 1.4301/1.4404 GGG 40/oG-CuSN 10/12 3 x 400 V / 50 Hz protection class IP 65 not attached With transformer 500 V / 400 V / 230 V 50 Hz / 60 Hz, protection class IP 65, programmable Rg 5, A 4 Electro-pneumatic (230 V - 6 bar) / (24 V - 6 bar) 20 3000 m Cover with bolts and nuts Screw Screw Flange in accordance with DIN 2632/ Form C Ball valve Ball valve ANSI or in accordance with customer specifications e.g. ANSI 1.4571, H II steel, CrNi, 1.0425 PTFE / FPM, other As specified by customer St, Ms, A 2, A 4 As specified by customer Attached on the filter as specified by the customer Special version or optional extras equipment
We manufacture and deliver additional design and material variants on customer request.
02
09/2008 by Krone Filter GmbH, subject to change
b 73
*c 43
e 75 75
f 14 14 14 18
g 50 90 100
l 14 13 12 20
u 84 115 190
120 49/61
160 77/90 123.5 250 *90 100 125 *169 200 150
250 1.180
10.390
236
280
175
23
20
650
400 1"
270 1.600
250
80
85
130
14.750
276
350
225
23
20
740
516
350 1.680
495
154
120
350
03
09/2008 by Krone Filter GmbH, subject to change
Perm. operating pressure Test pressure Germ. Lloyd Test pressure PED 97/23 EG Permissible operating pressure
e 335 335
f 12 x 18 12 x 18
g 850 992
h 1.230 1.490
approx. approx. p m n 350 410 437 490 515 240 270 375 410 470 406 457 559 650 750
u 400
Oil/ emulsion Viscosity throughput Water Liters at 60 at 200 m3/h m3/h 7o 110 175 290 390 90 145 225 310 430 200 395
KF-PCIII-08-2008-PP
3/4"
1/4
1"
450 500
1" 1"
1/2" 1/2"
11/2" 11/2"
580 620
04
09/2008 by Krone Filter GmbH, subject to change