Académique Documents
Professionnel Documents
Culture Documents
RRC Connection Setup DCCH RRC Connection Setup Complete Initial Direct Transfer CM Service Request Security Mode Command & Security Mode Complete UL Direct Transfer Setup DL Direct Transfer Identity Request & Identity Response Call Proceeding Facility Radio Bearer Setup & Radio Bearer Setup Complete Alerting Connect & Connect Acknowledge Measurement Control Measurement Report Active Set Update & Active Set Update Complete Disconnect UTRAN Mobility Information & UTRAN Mobility Information Confirm Release & Release Complete RRC Connection Release RRC Connection Release Complete
Summary UE identity & LAI Established Cause Current cell EcNo SRNC identity SRB, Transport Channel setup information UE capability information Information to establish signalling connection Mobile identity Service requested Ciphering Carry traffic and signalling messages between the CN and UE (UL) Bearer capability Called party information Carry traffic and signalling messages between the CN and UE (DL) UE identification Acknowledgement from network after related call information Supplementary services related information Configuration on radio bearer and transport channel DPCH spreading factor Indicate that the called user alerting has been initiated Indicate call acceptance by the called user Neighbor list of current active cells Active & monitor set cells EcNo to trigger event Event being triggered
Cause of call disconnect Allocate one or a combination of new C-RNTI, U-RNTI or mobility related information when S changed Release MM connection Release RRC connection Confirm release of RRC connection
Goto
Goto
Goto Goto
Goto Goto
Goto
Goto
Goto
Goto
Goto
Goto
Goto
Goto
Goto
Goto
Back
Back
Back
Back
Back
Back
Back
Back
Back
Back
Back
Back
Back
Back
UE capability information
uplink direction to carry traffic and signalling messages between the CN and UE over the radio interface
downlink direction to carry traffic and signalling messages between the CN and UE over the radio interface
identification of mobile
Back
Back
Addition Window (5
Addition time
Back
Back
Back
Addition Window (5
Addition time
Back
Back
Back
Back
Back
Back
Addition time
Must receive MC after ASUC in order to refresh neighbor list of current active cells
Addition time
SIB MIB
broadcasted information
PLMN types & identities Scheduling information SIB references NAS information UE timers & counters URA identity list Cell selection and re-selection parameters Parameters for common physical channel configuration
Goto
SIB
SIB 7
Goto
SIB 11 SIB 12
Goto
Goto
SIB 18
Goto
SIB
SIB 7
broadcasted information
UL interference level Dynamic persistence level (fast changing parameters) Measurement control information / NB measurement Measurement control information to be used in the connected mode PLMN identity of the neighbour cells to be considered for cell reselection
Goto
SIB 11 SIB 12
Goto
Goto
SIB 18
Goto
Back
Back
Back
q-RxlevMin = -58 (equals to [real value-1]/2, means -115) (-58 is the mapping value)
Back
Back
Back
Back
Back
PLMN list of a given type (IEs "PLMNs of intra-frequency cells list", "PLMNs of inter-frequency cells list", "PLMNs of inter-RAT cell lists") is paired with the list of cells of the same type derived from System Information Block type 11
Back
a given type (IEs tra-frequency cells of inter-frequency LMNs of inter-RAT paired with the list e same type derived Information Block