Académique Documents
Professionnel Documents
Culture Documents
Lampiran L.O.
Jadual Pesanan Alatan bil Tawaran : PGM 400 / 123 / 35 / 2013 GIATMARA : WISMA GIATMARA, IBU PEJABAT
KUANTITI MODEL (BUATAN) TEMPOH HARGA SATU (RM)
MAINTENANCE & SERVICE OF ONE (1) OF OTIS LIFT AT WISMA GIATMARA ( Re : JKKP Defects - Revised )
Description of Work To Supply and replace :1 Engineering cost to design, custom made and install car locking device c/w necessary accessories, wirings and testing & commissioning 1 pc RM 4,500.00 RM 4,500.00
Supply labour, tools and materials to install Emergency Batteries Operated Power Supply (EBOPS) c/w necessary wirings and testing & commissioning
1 pc
RM
3,900.00
RM
3,900.00
3 4 5
To relocate lift pit lighting and stop switch from bottom landing door raise up 1.5 meters To install earthling cable or coupler strip at trunkings and traction motor To supply and install fire extinguisher at lift motor room (Co2)
1 lot 1 lot 1 pc
RM RM -
350.00 750.00
RM RM -
350.00 750.00
JUMLAH
RM
9,500.00
Mukasurat : 2
JUMLAH HARGA (RM)
SEWING MACHINE HIGH SPEED 1 NEEDLE LOCKSTITCH BUTTON HOLDING MACHINE (Mesin Jahit Lubang Butang 1 Jarum) Sewing Speed : Max. 3600 s.p.m Needle Bar Stroke : 34.6 mm (1-23/64") Needle : DP X 5 # 11, # 14 Number Of Stitches : Adjustable from 54 to 345 Stitches by changing the gears. Lift of work clamp check : Max. 12mm (15/32") Knife : Rear knife system (In case of thread break the safety device is activated to stop the knife ) Sewing Hook : DP type special rotary hook (Automatically Lubricated ) Driving system : One belt is used. Two steep speed Change automatic stop motion system. Lubricating system : Fully automatic lubrication Motor : Single Phase Induction Motor (300w) Table formica with one drawer Stand industrial power fitted with rubber roller Tempoh Jaminan : 1 Tahun
1 UNIT
JUKI LBH-781
21 Hari
RM
14,000.00
RM
14,000.00
JUMLAH
RM
14,000.00
Mukasurat : 3
JUMLAH HARGA (RM)
HIGH SPEED SINGLE THREAD CHAINSTITCH BUTTON SEWING MACHINE (Mesin Jahit Butang) Tread triming mechanism : The triming mechnism that the tread is trimmed by the moving knife and the fixed knife under the throat plate. Tread : Thick cotton thread, synthelic, etc. to the thickness # 20 Needle : Organ TQ X 7 # 20 (#18) Singer - 175 x 1 # 048 Sewing Speed : 1500 s.p.m Number of Stitches : 8, 15, 32 or 6, 12, 24 ( according to each subclass ) Feed Length : lengthwise 0, 2.5 - 6.5 mm Crosswise 2.5 - 6.5 mm N.B Feed length must be adjusted according to each attechmeet which is sultable to each button size. Kinds of buttons which these machine can sew. 2 and 4 hole flat buttons, wrapped around buttons, with with stay buttons, shank buttong, snaps, metal buttons, metal buttons with stay button label. Buttons size : 10 to 28 mm daimeter Needle bar and stroke : 48.6 mm Thread take stroke : 48.6 mm Button clamp lifting system : Automatic system (pedal type possible ) Sewing system : single thread chainstitch stop - motion mechanism : Automatic stop motion mechanism (equipped with the speed decreasing device and the reverse rotation preventing devise) Motor : 2000 w (1/4 HP ) Single Phase Induction Table formica with one drawer Stand industrial power fitted with rubber roller Tempoh Jaminan : 1 Tahun
1 UNIT
JUKI MB 1377
21 Hari
RM
10,500.00
RM
10,500.00
RM RM
10,500.00 34,000.00