Vous êtes sur la page 1sur 0

Building an effective,

high performances, single 18,


front loaded subwoofer
Eighteen Sound
A division of A.E.B srl
Via dell'Industria 20 - 45025 Cavriago (Reggio Emilia)- Italy
18 subwoofer kit
High performance 18 inch subwoofer system.
Over damped design for better transient response.
Compact box dimension.
Flared end vent design for air turbulence reducing.
Internal bracing for cabinet loss reducing
Double driver choice is possible: 18ND9300 and
18LW1400 are basically the same speaker concept.
Their performances are very similar except for a
slightly more damping present in the 18ND9300. The
18ND9300 allows for a lighter weight box design. The
glorious 18LW1400 can still represent the proper
cost effective solution if same performances are
required with less restrictive weight limits.
18ND9300 woofer key features:
Neodymium magnet
4 interleaved sandwich voice coil
Double Silicon Spider
Double Demodulating Rings
900W continuous pink noise
18LW1400 woofer key features:
4 interleaved sandwich voice coil
Double Silicon Spider
Double Demodulating Rings
1000W continuous pink noise
18 subwoofer kit
18ND9300
18LW1400
18 subwoofer kit
I nternal view
The enclosure should be made of baltic
birch plywood (18mm thickness).
Bolts should be M5 or M6, 35mm or
more length.
M5 or M6 T-Nuts are recommended.
Accurate damping of the cabinet
interior is highly recommended.
An high density dampening material,
such as Dacron or other synthetic fibers,
is required for better performance.
Handling, rigging and connectors are at
users choice. Its very important that
their placement should not influence in
any way the proper vent functionality.
18 subwoofer kit
E
x
p
l
o
d
e
d

v
i
e
w
18 subwoofer kit
Front view
18 subwoofer kit
Front panel bolt holes
18 subwoofer kit
Front section
Woofer panel section
18 subwoofer kit
Side section
18 subwoofer kit
Rear panel
18 subwoofer kit
Measurements: 18ND9300/ 18LW1400
18 subwoofer kit
Equalization settings suggestions
18ND9300/ 18LW1400 18ND9300/ 18LW1400
High pass: High pass: Butterworth 2nd order @ 25 Hz Butterworth 2nd order @ 25 Hz
Parametric EQ: Parametric EQ: fo fo= 30 Hz = 30 Hz - - gain= 6 dB gain= 6 dB - - Q= 2 Q= 2
Low pass: Low pass: Linkwitz Linkwitz/Riley 4th order @ 120 Hz /Riley 4th order @ 120 Hz

Vous aimerez peut-être aussi