Académique Documents
Professionnel Documents
Culture Documents
Phone Tool
Phone Tool is a development tool build on top of our production test dll called DWDIO.DLL Phone Tool can communicate with target via serial comport (RS232). Phone Tool support different target platforms. P2002, P2002+, MP1UE,MP1G, BP2, ULC, etc. Phone Tool is written in Borland C++ Builder version 6.0 professional. Phone Tool is HASP protected, which mean you need a dongle before you can use it. But in ULC2 a new dongless security is implemented so no dongle is required.
27-Mar-07
Page 2
Start-up menu Automatically try to make successful connection to target, when the program is executed The memo field will be updated with information from Target
27-Mar-07
Page 3
HW and SW information Function to set the MS to normal or test mode MS reset button
27-Mar-07
Page 4
27-Mar-07
Page 5
27-Mar-07
Page 6
27-Mar-07
Page 7
Used to show all parameter in the given EEPROM structure for the actual EEP version and revision Used to change static NV-parameters Used to change dynamic NV-parameters Used to update a EEPROM structure with a EEP delta file
27-Mar-07
Page 8
This section is used to read and write sections of memory of the target
27-Mar-07
Page 9
This section is used to show and deleted exception logs from target
27-Mar-07
Page 10
Menu to support audio test in EGOLDVoice Support for internal polyphonic ringer
27-Mar-07 Copyright Infineon Technologies 2006. All rights reserved. Page 11
This section is used to read security version New IMEI can be programmed SIMLocks can be programmed
27-Mar-07
Page 12
This section is used to support DWDIO commands which are not available in other sections
27-Mar-07
Page 13
This section is used to get date and time settings from target New time and date can be set Check 32Khz is running
27-Mar-07
Page 14
Power
27-Mar-07
Page 15
This section is used to measure RF parameters for production purpose. For this function, CMU200 is required with option K47
27-Mar-07
Page 16
This section is comparable to Hyperterminal program in Windows Used to send and received AT commands
27-Mar-07
Page 17
Graphic Device
This section reads and displays display HW parameters Contrast settings can be set and stored and test image displayed Note: MS must be in production test mode for this section to function
27-Mar-07
Page 18
Charger
This section displays charger and battery information Continuous measurements can be done at a specifically set interval Data such as battery temperature can be read
27-Mar-07
Page 19
File System
Provides an interface to the Flash File System (FFS) if available Contents can be viewed as well as new media files added or deleted Factory defaults can be restored
27-Mar-07 Copyright Infineon Technologies 2006. All rights reserved. Page 20
Thank you for your attention Thank you for your attention! Any Questions?
27-Mar-07
Page 21