Académique Documents
Professionnel Documents
Culture Documents
Damped Oscillators
An oscillator is anything that has a rythmic periodic response. A damped oscillator has a response that fades away over time. Examples include a swinging pendulum, a bobbing weight on a spring, and also a resistor - inductor - capacitor (RLC) circuit. The interactive RLC simulation is nice, but what equations drive it? Is there a better approach than a numerical simulation? What component values make it under-damped? Over-damped? When is it a critically-damped oscillator? Mathemeticians have completely solved the equations that govern a damped oscillator. My web page shows their results, and explains how to compute frequency and critically-damped parts values.
Equations
Suppose you have an RLC circuit, which has a resistor + inductor + capacitor in series. When the switch closes at time t=0 the capacitor will discharge into a series resistor and inductor. What is the voltage V and current I as a function of time? Answer:
where:
and V= initial voltage C = capacitance (farads) R = resistance (ohms) L = inductance (henrys) e = base of natural log (2.71828...)
Critical Damping
We can use these equations to discover when the energy dies out smoothly (overdamped) or rings (under-damped). Look at the term under the square root sign, which can be simplified to: R2C2-4LC
When R2C2-4LC is positive, then and are real numbers and the oscillator is overdamped. The circuit does not show oscillation.
www.coilgun.info/theoryinductors/dampedoscillator.htm
When R2C2-4LC is negative, then and are imaginary numbers and the oscillations are under-damped. The circuit responds with a sine wave in an exponential decay envelope.
1/2
8/25/13
envelope.
When R2C2-4LC is zero, then and are zero and oscillations are critically damped. The circuit response shows a narrow peak followed by an exponential decay.
Resonant Frequency
The equations above will tell us the value as a function of time, but what we really want to know is the frequency of oscillation. An LC circuit will oscillate at an angular frequency of:
Examples
Question: What is a coilgun's firing period if it has an RLC circuit where R=0 and C=10,000 F and L=100 H? Answer: The firing period is only the first half-wave of the oscillation.
Question: What resistance will make this coilgun critically damped? Answer: Solve R2C2=4LC for resistance R to get:
www.coilgun.info/theoryinductors/dampedoscillator.htm
2/2