Vous êtes sur la page 1sur 98

Operators Dictionary

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 1
Printed Date: 9 July 2008
Operators Dictionary
TABLE OF CONTENTS
1 A............................................................................................................................................................... 18
1.1 ABSOLUTE PRESSURE...................................................................................................................... 18
1.2 ABSOLUTE TEMPERATURE .............................................................................................................. 18
1.3 ABSORPTION PROCESS.................................................................................................................... 18
1.4 ACCELERATOR................................................................................................................................... 18
1.5 ACCUMULATOR.................................................................................................................................. 18
1.6 ACETYLENE C2H2 .............................................................................................................................. 18
1.7 ACID ..................................................................................................................................................... 18
1.8 ADDITIVE ............................................................................................................................................. 18
1.9 ADIP ..................................................................................................................................................... 18
1.10 ADIP TREATING .................................................................................................................................. 18
1.11 ADSORPTION PROCESS.................................................................................................................... 18
1.12 AEROBIC ............................................................................................................................................. 19
1.13 AEROMETER ....................................................................................................................................... 19
1.14 AGGREGATE....................................................................................................................................... 19
1.15 AIR-BLOWN ASPHALT ....................................................................................................................... 19
1.16 AIR HEAT EXCHANGER ..................................................................................................................... 19
1.17 AIR SWEETENING............................................................................................................................... 19
1.18 ALCOHOLS.......................................................................................................................................... 19
1.19 ALGAE ................................................................................................................................................. 19
1.20 ALIPHATIC HYDROCARBONS ........................................................................................................... 19
1.21 ALKALI................................................................................................................................................. 19
1.22 ALKALI TEST....................................................................................................................................... 19
1.23 ALKALINE............................................................................................................................................ 19
1.24 ALKALINITY......................................................................................................................................... 19
1.25 ALKYLATION....................................................................................................................................... 19
1.26 ALLOY.................................................................................................................................................. 20
1.27 AMERICAN PETROLEUM INSTITUTE ................................................................................................ 20
1.28 AMERICAN SOCIETY FOR TESTING MATERIALS............................................................................ 20
1.29 AMINE .................................................................................................................................................. 20
1.30 AMMONIA NH3 .................................................................................................................................... 20
1.31 ANAEROBIC ........................................................................................................................................ 20
1.32 ANALYSIS............................................................................................................................................ 20
1.33 ANHYDROUS....................................................................................................................................... 20
1.34 ANILINE POINT.................................................................................................................................... 20
1.35 ANNEALING......................................................................................................................................... 20
1.36 ANTIFOAM AGENT.............................................................................................................................. 20
1.37 ANTI-KNOCK ....................................................................................................................................... 20
1.38 ANTI-KNOCK AGENT.......................................................................................................................... 20
1.39 ANTIOXIDANT ..................................................................................................................................... 20
1.40 ANTI-STATIC ADDITIVE ...................................................................................................................... 21
1.41 API GRAVITY ....................................................................................................................................... 21
1.42 AROMATIC BLEND ............................................................................................................................. 21
1.43 AROMATICS ........................................................................................................................................ 21
1.44 ASH ...................................................................................................................................................... 21
1.45 ASH CONTENT .................................................................................................................................... 21
1.46 ASPHALT ............................................................................................................................................. 21
1.47 ASPHALTENES ................................................................................................................................... 21
1.48 ASPHALTIC BASE CRUDE OILS........................................................................................................ 21
1.49 ASPHALTIC BITUMEN ........................................................................................................................ 21
1.50 ASPIRATOR......................................................................................................................................... 21
1.51 ASSOCIATED NATURAL GAS............................................................................................................ 22
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 2
Printed Date: 9 July 2008
Operators Dictionary
1.52 ASTM DISTILLATION .......................................................................................................................... 22
1.53 ASTM GUM TEST ................................................................................................................................ 22
1.54 ASTM MELTING POINT ....................................................................................................................... 22
1.55 ATMOSPHERIC PRESSURE ............................................................................................................... 22
1.56 ATOM ................................................................................................................................................... 22
1.57 ATOMISE\............................................................................................................................................. 22
1.58 ATTEMPERATOR\ ............................................................................................................................... 22
1.59 ATTRITION\.......................................................................................................................................... 22
1.60 AUTO IGNITION POINT ....................................................................................................................... 22
1.61 AVERAGE BOILING POINT................................................................................................................. 22
1.62 AVGAS ................................................................................................................................................. 22
1.63 AVIATION GASOLINE ......................................................................................................................... 22
1.64 AVTAG ................................................................................................................................................. 23
1.65 AVTUR ................................................................................................................................................. 23
1.66 AZEOTROPE........................................................................................................................................ 23
1.67 AZEOTROPIC DISTILLATION ............................................................................................................. 23
2 B............................................................................................................................................................... 24
2.1 BACK PRESSURE ............................................................................................................................... 24
2.2 BAFFLE................................................................................................................................................ 24
2.3 BALANCED DRAUGHT ....................................................................................................................... 24
2.4 BAR OVER ........................................................................................................................................... 24
2.5 BAROMETER....................................................................................................................................... 24
2.6 BAROMETRIC CONDENSER .............................................................................................................. 24
2.7 BAROMETRIC LEG ............................................................................................................................. 24
2.8 BARREL ............................................................................................................................................... 24
2.9 BASIC SEDIMENT AND WATER......................................................................................................... 24
2.10 BATCH ................................................................................................................................................. 24
2.11 BATCH PROCESS ............................................................................................................................... 24
2.12 BATTERY ............................................................................................................................................. 24
2.13 BATTERY LIMITS ................................................................................................................................ 24
2.14 BEARING ............................................................................................................................................. 24
2.15 BENZENE C6H6 .................................................................................................................................... 25
2.16 BIOCHEMICAL OXYGEN DEMAND (BOD)......................................................................................... 25
2.17 BIODEGRADATION ............................................................................................................................. 25
2.18 BIOTREATER....................................................................................................................................... 25
2.19 BITUMEN.............................................................................................................................................. 25
2.20 BLACK PRODUCTS ............................................................................................................................ 25
2.21 BLANK - See Spade ............................................................................................................................ 25
2.22 BLEEDING ........................................................................................................................................... 25
2.23 BLEND ................................................................................................................................................. 25
2.24 BLENDED FUEL OIL ........................................................................................................................... 25
2.25 BLENDING ........................................................................................................................................... 25
2.26 BLENDING STOCK.............................................................................................................................. 25
2.27 BLENDING VALUE (ANTI-KNOCK) .................................................................................................... 25
2.28 BLOCK VALVE .................................................................................................................................... 25
2.29 BLOCKED OPERATION ...................................................................................................................... 25
2.30 BLOWBACK......................................................................................................................................... 26
2.31 BLOW-BY............................................................................................................................................. 26
2.32 BLOWDOWN........................................................................................................................................ 26
2.33 BLOWER .............................................................................................................................................. 26
2.34 BLOWN BITUMEN ............................................................................................................................... 26
2.35 BLUE SMOKE ...................................................................................................................................... 26
2.36 BOILING POINT (AT A GIVEN PRESSURE) ....................................................................................... 26
2.37 BOILING RANGE ................................................................................................................................. 26

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 3
Printed Date: 9 July 2008
Operators Dictionary
2.38 BOMB................................................................................................................................................... 26
2.39 BOND ................................................................................................................................................... 26
2.40 BOOSTER STATION............................................................................................................................ 26
2.41 BOTTLED GAS .................................................................................................................................... 26
2.42 BOTTOMS ............................................................................................................................................ 26
2.43 BOX-IN ................................................................................................................................................. 26
2.44 BOX-UP ................................................................................................................................................ 27
2.45 BRAKE HORSEPOWER ...................................................................................................................... 27
2.46 BREAKER POINT ................................................................................................................................ 27
2.47 BREATHING......................................................................................................................................... 27
2.48 BRINE................................................................................................................................................... 27
2.49 BRITISH THERMAL UNIT (BTU) ......................................................................................................... 27
2.50 BRITOLITE ........................................................................................................................................... 27
2.51 BUFFER ............................................................................................................................................... 27
2.52 BUG COUNT ........................................................................................................................................ 27
2.53 BULK CRUSHING STRENGTH ........................................................................................................... 27
2.54 BULK DENSITY ................................................................................................................................... 27
2.55 BUND WALL ........................................................................................................................................ 27
2.56 BUNKER FUEL .................................................................................................................................... 27
2.57 BURNING OIL ...................................................................................................................................... 27
2.58 BUTANE C4H10 ..................................................................................................................................... 28
2.59 BUTANE DE-ASPHALTING................................................................................................................. 28
2.60 BYPRODUCT ....................................................................................................................................... 28
3 C............................................................................................................................................................... 29
3.1 C1,C2,C3,C4,C5....................................................................................................................................... 29
3.2 CALIBRATION ..................................................................................................................................... 29
3.3 CALMING SECTION TRAYS ............................................................................................................... 29
3.4 CALORIE.............................................................................................................................................. 29
3.5 CALORIFIC VALUE ............................................................................................................................. 29
3.6 CANDLEPOWER.................................................................................................................................. 29
3.7 CAPILLARITY ...................................................................................................................................... 29
3.8 CARBON .............................................................................................................................................. 29
3.9 CARBON (FIXED CARBON)................................................................................................................ 29
3.10 CARBON DEPOSIT.............................................................................................................................. 29
3.11 CARBON DIOXIDE............................................................................................................................... 29
3.12 CARBON MONOXIDE.......................................................................................................................... 29
3.13 CARBURETTOR .................................................................................................................................. 30
3.14 CARRYOVER ....................................................................................................................................... 30
3.15 CASCADE TRAY.................................................................................................................................. 30
3.16 CATALYSIS.......................................................................................................................................... 30
3.17 CATALYST........................................................................................................................................... 30
3.18 CATALYST POISON ............................................................................................................................ 30
3.19 CATALYTIC PROCESS ....................................................................................................................... 30
3.20 CATALYTIC REFORMING ................................................................................................................... 30
3.21 CATHODIC PROTECTION................................................................................................................... 30
3.22 CAUSTIC SODA................................................................................................................................... 30
3.23 CENTRIGRADE (CELSIUS) SCALE .................................................................................................... 30
3.24 CENTIPOISE, CENTISTOKES ............................................................................................................. 30
3.25 CENTRIFUGAL COMPRESSOR.......................................................................................................... 31
3.26 CENTRIFUGAL PUMP ......................................................................................................................... 31
3.27 CENTRIFUGE....................................................................................................................................... 31
3.28 CERAMIC BALLS ................................................................................................................................ 31
3.29 CETANE NUMBER............................................................................................................................... 31
3.30 CFR ENGINE........................................................................................................................................ 31

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 4
Printed Date: 9 July 2008
Operators Dictionary
3.31 CHANNELING ...................................................................................................................................... 31
3.32 CHARACTERISATION......................................................................................................................... 31
3.33 CHAR VALUE ...................................................................................................................................... 31
3.34 CHECK VALVE (NON RETURN VALVE) ............................................................................................ 31
3.35 CHEMICAL OXYGEN DEMAND (COD) ............................................................................................... 31
3.36 CHLORINATION................................................................................................................................... 31
3.37 CHROMOMETER - See Colorimeter................................................................................................... 31
3.38 CLADDING ........................................................................................................................................... 31
3.39 CLAUS PROCESS ............................................................................................................................... 31
3.40 CLEAR GASOLINE .............................................................................................................................. 32
3.41 CLOUD POINT ..................................................................................................................................... 32
3.42 COAGULATION ................................................................................................................................... 32
3.43 COALESCER ....................................................................................................................................... 32
3.44 COASTAL TANKER Ltd- (CTL)........................................................................................................... 32
3.45 COEFFICIENT OF EXPANSION .......................................................................................................... 32
3.46 COFFERDAMS..................................................................................................................................... 32
3.47 COKE ................................................................................................................................................... 32
3.48 COKE DRUM........................................................................................................................................ 32
3.49 COLD FILTER PLUGGING POINT....................................................................................................... 32
3.50 COLORIMETER ................................................................................................................................... 32
3.51 COMBINED FEED RATIO (CFR) ......................................................................................................... 32
3.52 COMBUSTION ..................................................................................................................................... 32
3.53 COMBUSTION CHAMBER .................................................................................................................. 32
3.54 COMPATABILITY................................................................................................................................. 32
3.55 COMPOUND......................................................................................................................................... 32
3.56 COMPRESSION ................................................................................................................................... 33
3.57 COMPRESSION IGNITION .................................................................................................................. 33
3.58 COMPRESSION RATIO ....................................................................................................................... 33
3.59 COMPRESSOR .................................................................................................................................... 33
3.60 CONDENSATE ..................................................................................................................................... 33
3.61 CONDENSATION (PHYSICAL)............................................................................................................ 33
3.62 CONDENSER ....................................................................................................................................... 33
3.63 CONDENSER BOX .............................................................................................................................. 33
3.64 CONDUCTIVITY ................................................................................................................................... 33
3.65 CONGEAL ............................................................................................................................................ 33
3.66 CONTINUOUS CATALYST REGENERATOR ..................................................................................... 33
3.67 CONTINUOUS DISTILLATION ............................................................................................................ 33
3.68 CONTROL LOOP ................................................................................................................................. 33
3.69 CONTROLLER ..................................................................................................................................... 33
3.70 CONVECTION ...................................................................................................................................... 33
3.71 CONVECTION SECTION ..................................................................................................................... 34
3.72 CONVENTIONAL PRODUCTS ............................................................................................................ 34
3.73 CONVERSION PROCESSES............................................................................................................... 34
3.74 COOLER............................................................................................................................................... 34
3.75 COOLING TOWER ............................................................................................................................... 34
3.76 COPPER STRIP CORROSION ............................................................................................................ 34
3.77 CORRECTED ENERGY & LOSS (CEL)............................................................................................... 34
3.78 CORROSION........................................................................................................................................ 34
3.79 COUNTERCURRENT FLOW ............................................................................................................... 34
3.80 CRACKING........................................................................................................................................... 34
3.81 CREDITORS......................................................................................................................................... 34
3.82 CREEP ................................................................................................................................................. 34
3.83 CRITERIA REFERENCED INSTRUCTION .......................................................................................... 34
3.84 CRITICAL PRESSURE......................................................................................................................... 34
3.85 CRITICAL TEMPERATURE ................................................................................................................. 34
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 5
Printed Date: 9 July 2008
Operators Dictionary
3.86 CRITICAL VELOCITY .......................................................................................................................... 35
3.87 CRUDE NAPHTHA............................................................................................................................... 35
3.88 CRUDE OIL TYPES.............................................................................................................................. 35
3.89 CRUDE WAX........................................................................................................................................ 35
3.90 CRYSTALISATION............................................................................................................................... 35
3.91 CUSTODY TRANSFER TANKS ........................................................................................................... 35
3.92 CURRENT RATE.................................................................................................................................. 35
3.93 CUT ...................................................................................................................................................... 35
3.94 CUT POINT........................................................................................................................................... 35
3.95 CYCLISATION...................................................................................................................................... 35
3.96 CYCLONE SEPARATOR ..................................................................................................................... 35
4 D............................................................................................................................................................... 36
4.1 DAMPER .............................................................................................................................................. 36
4.2 DEACTIVATION ................................................................................................................................... 36
4.3 DEADWEIGHT ..................................................................................................................................... 36
4.4 DEARATOR.......................................................................................................................................... 36
4.5 DEBTORS ............................................................................................................................................ 36
4.6 DECOMPOSITION................................................................................................................................ 36
4.7 DEFERRED TAXATION ....................................................................................................................... 36
4.8 DEHYDRATION.................................................................................................................................... 36
4.9 DEHYDROCYCLISATION .................................................................................................................... 36
4.10 DEHYDROGENATION ......................................................................................................................... 36
4.11 DEIONIZED WATER ............................................................................................................................ 36
4.12 DEISOLATION ..................................................................................................................................... 36
4.13 DEMISTER ........................................................................................................................................... 36
4.14 DEMULSIFIER...................................................................................................................................... 36
4.15 DEMURRAGE ...................................................................................................................................... 36
4.16 DENITRIFICATION............................................................................................................................... 37
4.17 DENSE BED LOADING........................................................................................................................ 37
4.18 DEOXYGENATION............................................................................................................................... 37
4.19 DESALTING ......................................................................................................................................... 37
4.20 DESULPHURISATION - See Hydrodesulphurisation ........................................................................ 37
4.21 DESUPERHEATER .............................................................................................................................. 37
4.22 DETERGENCY ..................................................................................................................................... 37
4.23 DETERGENT OIL ................................................................................................................................. 37
4.24 DETONATION ...................................................................................................................................... 37
4.25 DEW POINT (at a given pressure) ...................................................................................................... 37
4.26 DEWAXING .......................................................................................................................................... 37
4.27 DIESEL ENGINE .................................................................................................................................. 37
4.28 DIESEL FUEL....................................................................................................................................... 37
4.29 DIESEL INDEX ..................................................................................................................................... 37
4.30 DIFLUOROETHANE............................................................................................................................. 38
4.31 DILUENT .............................................................................................................................................. 38
4.32 DIPPING ............................................................................................................................................... 38
4.33 DISTILLATE ......................................................................................................................................... 38
4.34 DISTILLATION (fractional) .................................................................................................................. 38
4.35 DISTILLATION CURVE ........................................................................................................................ 38
4.36 DISTILLATION LOSS........................................................................................................................... 38
4.37 DISTRIBUTOR (LIQUID/GAS) ............................................................................................................. 38
4.38 DISULPHIDE ........................................................................................................................................ 38
4.39 DIVIDEND COVER ............................................................................................................................... 38
4.40 DIVIDEND YIELD ................................................................................................................................. 38
4.41 DOCTOR SOLUTION ........................................................................................................................... 38
4.42 DOCTOR TREATMENT ....................................................................................................................... 38

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 6
Printed Date: 9 July 2008
Operators Dictionary
4.43 DOLPHIN.............................................................................................................................................. 39
4.44 DOWNCOMER ..................................................................................................................................... 39
4.45 DOWNSTREAM.................................................................................................................................... 39
4.46 DRAW OFF........................................................................................................................................... 39
4.47 DRY GAS.............................................................................................................................................. 39
4.48 DUAL PURPOSE KEROSENE............................................................................................................. 39
5 E............................................................................................................................................................... 40
5.1 EARNINGS PER SHARE (CENTS) ...................................................................................................... 40
5.2 ECONOMISER ..................................................................................................................................... 40
5.3 EJECTOR ............................................................................................................................................. 40
5.4 ELASTOMER ....................................................................................................................................... 40
5.5 ELECTRICAL ISOLATION CERTIFICATE........................................................................................... 40
5.6 ELECTROLYSIS................................................................................................................................... 40
5.7 EMULSIFIER ........................................................................................................................................ 40
5.8 EMULSION ........................................................................................................................................... 40
5.9 END POINT .......................................................................................................................................... 40
5.10 ENDOTHERMIC ................................................................................................................................... 40
5.11 ENGINE OIL ......................................................................................................................................... 40
5.12 ENGLER DISTILLATION...................................................................................................................... 40
5.13 ENTRAINMENT .................................................................................................................................... 40
5.14 EROSION ............................................................................................................................................. 40
5.15 ETHANE C2H6 ...................................................................................................................................... 41
5.16 ETHENE ............................................................................................................................................... 41
5.17 EVACUATION ...................................................................................................................................... 41
5.18 EVAPORATION.................................................................................................................................... 41
5.19 EVAPORATOR..................................................................................................................................... 41
5.20 EX SITU REGEN .................................................................................................................................. 41
5.21 EXOTHERMIC ...................................................................................................................................... 41
5.22 EXPANSION JOINT ............................................................................................................................. 41
5.23 EXTRACT ............................................................................................................................................. 41
5.24 EXTRACTION....................................................................................................................................... 41
5.25 EXTRACTION DEPTH.......................................................................................................................... 41
5.26 EXTRACTOR........................................................................................................................................ 41
5.27 EXTRAORDINARY ITEMS ................................................................................................................... 41
5.28 EXTREME PRESSURE LUBRICANTS ................................................................................................ 41
6 F ............................................................................................................................................................... 42
6.1 FAECAL COLIFORM (F. COLI.) .......................................................................................................... 42
6.2 FATIGUE .............................................................................................................................................. 42
6.3 FEED PREPARATION UNIT ................................................................................................................ 42
6.4 FEEDSTOCK........................................................................................................................................ 42
6.5 FILTER ................................................................................................................................................. 42
6.6 FILTRATE............................................................................................................................................. 42
6.7 FIN FAN................................................................................................................................................ 42
6.8 FIRE WALL .......................................................................................................................................... 42
6.9 FIXED-BED OPERATION..................................................................................................................... 42
6.10 FLAME ARRESTOR............................................................................................................................. 42
6.11 FLAMMABLE ....................................................................................................................................... 42
6.12 FLASH.................................................................................................................................................. 42
6.13 FLASH DISTILLATION ........................................................................................................................ 42
6.14 FLASH POINT ...................................................................................................................................... 42
6.15 FLEXIBLE VOLATILITY INDEX ........................................................................................................... 43
6.16 FLOATING HEAD................................................................................................................................. 43
6.17 FLOATING ROOF ................................................................................................................................ 43
6.18 FLOC .................................................................................................................................................... 43
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 7
Printed Date: 9 July 2008
Operators Dictionary
6.19 FLOCCULATION.................................................................................................................................. 43
6.20 FLOODING ........................................................................................................................................... 43
6.21 FLUE GAS............................................................................................................................................ 43
6.22 FLUID ................................................................................................................................................... 43
6.23 FLUID BED OPERATION..................................................................................................................... 43
6.24 FOAM ................................................................................................................................................... 43
6.25 FOAMING ............................................................................................................................................. 43
6.26 FORCED DRAUGHT ............................................................................................................................ 43
6.27 FRACTION ........................................................................................................................................... 43
6.28 FRACTIONAL CONDENSATION ......................................................................................................... 44
6.29 FRACTIONATING COLUMN................................................................................................................ 44
6.30 FRACTIONATING TRAYS ................................................................................................................... 44
6.31 FRACTIONATION ................................................................................................................................ 44
6.32 FREE ON BOARD (FOB) ..................................................................................................................... 44
6.33 FREE WATER ...................................................................................................................................... 44
6.34 FREEZE POINT .................................................................................................................................... 44
6.35 FREEZING POINT ................................................................................................................................ 44
6.36 FRESH GAS ......................................................................................................................................... 44
6.37 FRICTION ............................................................................................................................................. 44
6.38 FUEL AIR RATIO ................................................................................................................................. 44
6.39 FUEL CELL .......................................................................................................................................... 44
6.40 FUEL GAS............................................................................................................................................ 45
6.41 FUEL OIL.............................................................................................................................................. 45
6.42 FUNCTIONAL LOGIC SCHEME .......................................................................................................... 45
6.43 FUNCTIONAL LOGIC SYSTEM........................................................................................................... 45
6.44 FURNACE ............................................................................................................................................ 45
6.45 FURNACE PASS.................................................................................................................................. 45
7 G .............................................................................................................................................................. 46
7.1 GAP ...................................................................................................................................................... 46
7.2 GAS HOLDER ...................................................................................................................................... 46
7.3 GAS OIL ............................................................................................................................................... 46
7.4 GAS/OIL RATIO ................................................................................................................................... 46
7.5 GASOLINE ........................................................................................................................................... 46
7.6 GAS TURBINE ..................................................................................................................................... 46
7.7 GATHERING STATION........................................................................................................................ 46
7.8 GEAR OIL............................................................................................................................................. 46
7.9 GLAND ................................................................................................................................................. 46
7.10 GOVERNOR ......................................................................................................................................... 46
7.11 GRAVITOMETER ................................................................................................................................. 46
7.12 GRID TRAYS........................................................................................................................................ 46
7.13 GUM ..................................................................................................................................................... 46
8 H............................................................................................................................................................... 47
8.1 HAMER LINE BLIND............................................................................................................................ 47
8.2 HEADER............................................................................................................................................... 47
8.3 HEAT CAPACITY ................................................................................................................................. 47
8.4 HEAT EXCHANGER ............................................................................................................................ 47
8.5 HEAT OF COMBUSTION ..................................................................................................................... 47
8.6 HEATER ............................................................................................................................................... 47
8.7 HI-FI TRAYS......................................................................................................................................... 47
8.8 HIGH VACUUM UNIT ........................................................................................................................... 47
8.9 HORSEPOWER.................................................................................................................................... 47
8.10 HORTON SPHERE............................................................................................................................... 47
8.11 HOT OIL ............................................................................................................................................... 47
8.12 HOT SPOT............................................................................................................................................ 47
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 8
Printed Date: 9 July 2008
Operators Dictionary
8.13 HUMIDITY............................................................................................................................................. 47
8.14 HYDRATE............................................................................................................................................. 48
8.15 HYDRATION......................................................................................................................................... 48
8.16 HYDRAULIC FLUIDS ........................................................................................................................... 48
8.17 HYDROCARBON ................................................................................................................................. 48
8.18 HYDROCHLORIC ACID ....................................................................................................................... 48
8.19 HYDROCRACKING.............................................................................................................................. 48
8.20 HYDRODEALKYLATION ..................................................................................................................... 48
8.21 HYDRODESULPHURIZATION............................................................................................................. 48
8.22 HYDROGEN ......................................................................................................................................... 48
8.23 HYDROGEN BLISTERING................................................................................................................... 48
8.24 HYDROGEN SULPHIDE ...................................................................................................................... 48
8.25 HYDROGENATION .............................................................................................................................. 48
8.26 HYDROLYSIS....................................................................................................................................... 48
8.27 HYDROMETER .................................................................................................................................... 49
8.28 HYDROSTATIC HEAD ......................................................................................................................... 49
1.29 HYDROSTATIC TEST .......................................................................................................................... 49
8.30 HYDROTREATING............................................................................................................................... 49
9 I ................................................................................................................................................................ 50
9.1 IGNITION POINT .................................................................................................................................. 50
9.2 IGNITION QUALITY ............................................................................................................................. 50
9.3 IMMISCIBLE......................................................................................................................................... 50
9.4 INCOMPATIBLE................................................................................................................................... 50
9.5 INDIGENOUS FEEDSTOCK ................................................................................................................ 50
9.6 INDUCED DRAUGHT........................................................................................................................... 50
9.7 INERT ENTRY ...................................................................................................................................... 50
9.8 INERT GAS .......................................................................................................................................... 50
9.9 INERT FILLER...................................................................................................................................... 50
9.10 INFLAMMABLE.................................................................................................................................... 50
9.11 INHIBITOR............................................................................................................................................ 50
9.12 INITIAL BOILING POINT...................................................................................................................... 50
9.13 INJECTOR............................................................................................................................................ 50
9.14 IN-LINE BLENDING ............................................................................................................................. 50
9.15 INORGANIC ......................................................................................................................................... 51
9.16 INSITU REGEN .................................................................................................................................... 51
9.17 INSTITUTE OF PETROLEUM .............................................................................................................. 51
9.18 INTERCEPTOR .................................................................................................................................... 51
9.19 INTERNAL-COMBUSTION ENGINE.................................................................................................... 51
9.20 ION EXCHANGE RESINS .................................................................................................................... 51
9.21 ISOLATE .............................................................................................................................................. 51
9.22 ISOMER................................................................................................................................................ 51
9.23 ISOMERISATION ................................................................................................................................. 51
9.24 ISO-OCTANE C8H18 (2,2,4-TRIMETHYLPENTANE).......................................................................... 51
9.25 ISOTOPE .............................................................................................................................................. 51
10 J ............................................................................................................................................................... 52
10.1 JET A1.................................................................................................................................................. 52
10.2 JET ENGINE (see also Gas Turbine).................................................................................................. 52
10.3 JET FUEL ............................................................................................................................................. 52
10.4 JETTY HOSE........................................................................................................................................ 52
11 K............................................................................................................................................................... 53
11.1 KELVIN................................................................................................................................................. 53
11.2 KEROSENE.......................................................................................................................................... 53
11.3 KETTLE REBOILER............................................................................................................................. 53
11.4 KNOCK................................................................................................................................................. 53
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 9
Printed Date: 9 July 2008
Operators Dictionary
11.5 KNOCKOUT (DRUM OR VESSEL) ...................................................................................................... 53
12 L ............................................................................................................................................................... 54
12.1 LAGGING ............................................................................................................................................. 54
12.2 LASER ALIGNMENT............................................................................................................................ 54
12.3 LATENT HEAT ..................................................................................................................................... 54
12.4 LEAD .................................................................................................................................................... 54
12.5 LEAD ACETATE TEST ........................................................................................................................ 54
12.6 LEAD SUSCEPTIBILITY ...................................................................................................................... 54
12.7 LEADED GASOLINE............................................................................................................................ 54
12.8 LEAN ADIP........................................................................................................................................... 54
12.9 LICHEN................................................................................................................................................. 54
12.10 LIGHT DISTILLATE .......................................................................................................................... 54
12.11 LIGHT ENDS..................................................................................................................................... 54
12.12 LIGHT TOPS ..................................................................................................................................... 54
12.13 LINEAR PROGRAMME (LP) ............................................................................................................ 54
12.14 LIQUEFIED NATURAL GAS (LNG).................................................................................................. 54
12.15 LIQUEFIED PETROLEUM GAS (LPG)............................................................................................. 55
12.16 LIQUID PHASE ................................................................................................................................. 55
12.17 LIQUID SEAL.................................................................................................................................... 55
12.18 LITRE ................................................................................................................................................ 55
12.19 LIVE STEAM..................................................................................................................................... 55
12.20 LOAD-ON-TOP SYSTEM.................................................................................................................. 55
12.21 LOADING RACK............................................................................................................................... 55
12.22 LOGIC ............................................................................................................................................... 55
12.23 LONG RESIDUE ............................................................................................................................... 55
12.24 LOST TIME ACCIDENT (LTI) ........................................................................................................... 55
12.25 LOW VISCOSITY INDEX .................................................................................................................. 55
12.26 LOWER EXPLOSIVE LIMIT.............................................................................................................. 55
12.27 LUBOIL ............................................................................................................................................. 55
12.28 LUBRICANT ..................................................................................................................................... 55
12.29 LUBRICATING OIL........................................................................................................................... 56
12.30 LUBRICATION.................................................................................................................................. 56
13 M .............................................................................................................................................................. 57
13.1 M CAP DECK ....................................................................................................................................... 57
13.2 MANIFOLD ........................................................................................................................................... 57
13.3 MANOMETER ...................................................................................................................................... 57
13.4 MASS SPECTROMETER ..................................................................................................................... 57
13.5 MELTING POINT .................................................................................................................................. 57
13.6 MERCAPTANS..................................................................................................................................... 57
13.7 METHANATOR .................................................................................................................................... 57
13.8 METHANE CH4 .................................................................................................................................... 57
13.9 METHANE SERIES .............................................................................................................................. 57
13.10 METHANOL ...................................................................................................................................... 57
13.11 METHYL CHLOROFORM................................................................................................................. 57
13.12 METHYL TERTIARY BUTYL ETHER (MTBE).................................................................................. 57
13.13 METRIC SYSTEM ............................................................................................................................. 58
13.14 MICROCRYSTALLINE WAXES........................................................................................................ 58
13.15 MIDDLE DISTILLATE ....................................................................................................................... 58
13.16 MINERAL OIL ................................................................................................................................... 58
13.17 MINIMUM STOP................................................................................................................................ 58
13.18 MISCIBLE ......................................................................................................................................... 58
13.19 MIXED BASE CRUDE ...................................................................................................................... 58
13.20 MIXER ............................................................................................................................................... 58
13.21 MIXING VALVE................................................................................................................................. 58
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 10
Printed Date: 9 July 2008
Operators Dictionary
13.22 MIXTURE .......................................................................................................................................... 58
13.23 MOLE PERCENT .............................................................................................................................. 58
13.24 MOLECULAR WEIGHT .................................................................................................................... 58
13.25 MOLECULE ...................................................................................................................................... 58
13.26 MOTOR GASOLINE ......................................................................................................................... 58
13.27 MOTOR OCTANE NUMBER (MON)................................................................................................. 59
13.28 MOTORISED VALVE ........................................................................................................................ 59
13.29 MULTIGRADE OIL............................................................................................................................ 59
13.30 MULTISTAGE PUMP ........................................................................................................................ 59
14 N............................................................................................................................................................... 60
14.1 NAPHTHA ............................................................................................................................................ 60
14.2 NAPHTHENE........................................................................................................................................ 60
14.3 NAPHTHENIC ACID............................................................................................................................. 60
14.4 NAPHTHENIC CRUDE ......................................................................................................................... 60
14.5 NATURAL DRAUGHT .......................................................................................................................... 60
14.6 NATURAL GAS .................................................................................................................................... 60
14.7 NATURAL GASOLINE ......................................................................................................................... 60
14.8 NET ASSET BACKING/SHARE ........................................................................................................... 60
14.9 NET PROFIT AFTER TAX.................................................................................................................... 60
14.10 NET PROFIT BEFORE TAX ............................................................................................................. 60
14.11 NEUTRAL ......................................................................................................................................... 60
14.12 NEUTRON......................................................................................................................................... 60
14.13 NITROGEN ....................................................................................................................................... 61
14.14 NITROGEN BASE............................................................................................................................. 61
14.15 NON-ASSOCIATED NATURAL GAS ............................................................................................... 61
14.16 NON CUSTODY TRANSFER TANKS .............................................................................................. 61
14.17 NORMALISE ..................................................................................................................................... 61
15 O .............................................................................................................................................................. 62
15.1 OCTANE............................................................................................................................................... 62
15.2 OIL RING .............................................................................................................................................. 62
15.3 OIL SHALE........................................................................................................................................... 62
15.4 OLEFINS .............................................................................................................................................. 62
15.5 ONCE-THROUGH ................................................................................................................................ 62
15.6 ON STREAM ........................................................................................................................................ 62
15.7 ORGANIC ............................................................................................................................................. 62
15.8 ORIFICE METER .................................................................................................................................. 62
15.9 ORIFICE PLATE................................................................................................................................... 62
15.10 OSMOSIS.......................................................................................................................................... 62
15.11 OUTPUT............................................................................................................................................ 62
15.12 OVERHEADS.................................................................................................................................... 62
15.13 OVERLAP ......................................................................................................................................... 63
15.14 OXIDATION ...................................................................................................................................... 63
15.15 OXIDIZING FLAME........................................................................................................................... 63
16 P............................................................................................................................................................... 64
16.1 PACKED TOWER................................................................................................................................. 64
16.2 PACKING ............................................................................................................................................. 64
16.3 PALL RINGS ........................................................................................................................................ 64
16.4 PARAFFIN-BASE CRUDE ................................................................................................................... 64
16.5 PARAFFINS ......................................................................................................................................... 64
16.6 PARAFFIN WAX................................................................................................................................... 64
16.7 PARTIAL CONDENSER....................................................................................................................... 64
16.8 PARTIAL PRESSURE.......................................................................................................................... 64
1.9 PENETRATION .................................................................................................................................... 64
16.10 PERMIT TO WORK........................................................................................................................... 64
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 11
Printed Date: 9 July 2008
Operators Dictionary
16.11 PETROIL MIXTURE (2 STROKE MIX) ............................................................................................. 64
16.12 PETROL............................................................................................................................................ 64
16.13 PETROLEUM .................................................................................................................................... 65
16.14 PETROLEUM NAPHTHA.................................................................................................................. 65
16.15 PETROLEUM SPIRITS ..................................................................................................................... 65
16.16 PETROLEUM WAX........................................................................................................................... 65
16.17 PHENOL ........................................................................................................................................... 65
16.18 PHOSPHATE .................................................................................................................................... 65
16.19 pH VALUE ........................................................................................................................................ 65
16.20 PIG .................................................................................................................................................... 65
16.21 PILOT PLANT ................................................................................................................................... 65
16.22 PIPELINE .......................................................................................................................................... 65
16.23 PISTON ............................................................................................................................................. 65
16.24 PISTON RING ................................................................................................................................... 65
16.25 PITTING ............................................................................................................................................ 65
16.26 PLASTICIZERS................................................................................................................................. 65
16.27 PLATFORMING ................................................................................................................................ 66
16.28 POLYELECTROLYTE ...................................................................................................................... 66
16.29 POLYMER......................................................................................................................................... 66
16.30 POUR POINT .................................................................................................................................... 66
16.31 POWER RECOVERY TURBINE ....................................................................................................... 66
16.32 PREDILUTON (RATIO)..................................................................................................................... 66
16.33 PREHEAT ......................................................................................................................................... 66
16.34 PREHEATER .................................................................................................................................... 66
16.35 PRESSURE....................................................................................................................................... 66
16.36 PRESSURE DROP ........................................................................................................................... 66
16.37 PRESULPHIDE ................................................................................................................................. 66
16.38 PRIMARY.......................................................................................................................................... 66
16.39 PRIMARY AIR................................................................................................................................... 66
16.40 PRIMARY PROCESS ....................................................................................................................... 66
16.41 PRIME MOVER ................................................................................................................................. 67
16.42 PROCESS INTEGRATION ............................................................................................................... 67
16.43 PROMOTER...................................................................................................................................... 67
16.44 PROPANE C3H8............................................................................................................................... 67
16.45 PROPYLENE C3H6 .......................................................................................................................... 67
16.46 PROSS.............................................................................................................................................. 67
16.47 PUKING ............................................................................................................................................ 67
16.48 PURGING.......................................................................................................................................... 67
16.49 PYROPHORIC .................................................................................................................................. 67
17 Q .............................................................................................................................................................. 68
17.1 QUENCH .............................................................................................................................................. 68
17.2 QUENCH GAS...................................................................................................................................... 68
17.3 QUENCHING OILS............................................................................................................................... 68
18 R............................................................................................................................................................... 69
18.1 RADIANT ENERGY.............................................................................................................................. 69
18.2 RADIANT SECTION ............................................................................................................................. 69
18.3 RADIATION .......................................................................................................................................... 69
18.4 RADICAL.............................................................................................................................................. 69
18.5 RAFFINATE.......................................................................................................................................... 69
18.6 RASCHIG RING.................................................................................................................................... 69
18.7 REACTION ........................................................................................................................................... 69
18.8 REACTION TIME.................................................................................................................................. 69
18.9 REACTOR ............................................................................................................................................ 69
18.10 REBOILER........................................................................................................................................ 69
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 12
Printed Date: 9 July 2008
Operators Dictionary
18.11 RECIPROCATING COMPRESSOR.................................................................................................. 69
18.12 RECIPROCATING PUMP ................................................................................................................. 69
18.13 RECLAIMER ..................................................................................................................................... 69
18.14 RECONTACTING.............................................................................................................................. 69
18.15 RECYCLE GAS................................................................................................................................. 70
18.16 RECYCLE OIL .................................................................................................................................. 70
18.17 RECYCLE RATIO ............................................................................................................................. 70
18.18 RECYCLING ..................................................................................................................................... 70
18.19 REDUCED CRUDE ........................................................................................................................... 70
18.20 REDUCTION ..................................................................................................................................... 70
18.21 REFINERS MARGIN - GROSS ......................................................................................................... 70
18.22 REFINERS MARGIN - NET............................................................................................................... 70
18.23 REFINERY ........................................................................................................................................ 70
18.24 REFINERY FUEL AND LOSS........................................................................................................... 70
18.25 REFINING ......................................................................................................................................... 70
18.26 REFLUX ............................................................................................................................................ 70
18.27 REFLUX CONDENSER .................................................................................................................... 70
18.28 REFLUX RATIO ................................................................................................................................ 70
18.29 REFORMING .................................................................................................................................... 71
18.30 REFRACTORY.................................................................................................................................. 71
18.31 REFRACTORY BRICK ..................................................................................................................... 71
18.32 REGENERATION.............................................................................................................................. 71
18.33 REGENERATOR............................................................................................................................... 71
18.34 REID VAPOUR PRESSURE (RVP) .................................................................................................. 71
18.35 RELIEF VALVE................................................................................................................................. 71
18.36 RERUNNING..................................................................................................................................... 71
18.37 RESEARCH OCTANE NUMBER (RON)........................................................................................... 71
18.38 RESIDENCE TIME ............................................................................................................................ 71
18.39 RESIDUAL FUEL OIL ....................................................................................................................... 71
18.40 RESIDUE .......................................................................................................................................... 71
18.41 RESIN ............................................................................................................................................... 72
18.42 RETAINED EARNINGS .................................................................................................................... 72
18.43 RETURN BEND ................................................................................................................................ 72
18.44 RICH ADIP ........................................................................................................................................ 72
18.45 RING COMPOUNDS......................................................................................................................... 72
18.46 RISER ............................................................................................................................................... 72
18.47 ROCKET FUEL ................................................................................................................................. 72
18.48 ROTAMETER.................................................................................................................................... 72
18.49 ROTARY PUMP ................................................................................................................................ 72
18.50 RUNDOWN TANK ............................................................................................................................ 72
19 S............................................................................................................................................................... 73
19.1 SAE CLASSIFICATION........................................................................................................................ 73
19.2 SAFEGUARDING ................................................................................................................................. 73
19.3 SALT .................................................................................................................................................... 73
19.4 SAMPLE ............................................................................................................................................... 73
19.5 SATURATED HYDROCARBON .......................................................................................................... 73
19.6 SATURATION TEMPERATURE .......................................................................................................... 73
19.7 SCAVENGERS ..................................................................................................................................... 73
19.8 SCHEDULING ...................................................................................................................................... 73
19.9 SCHOEPENTOETER ........................................................................................................................... 73
19.10 SEAL................................................................................................................................................. 73
19.11 SECONDARY AIR ............................................................................................................................ 73
19.12 SECONDARY PROCESS ................................................................................................................. 73
19.13 SEIZE ................................................................................................................................................ 74

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 13
Printed Date: 9 July 2008
Operators Dictionary
19.14 SENSIBLE HEAT.............................................................................................................................. 74
19.15 SEPARATOR .................................................................................................................................... 74
19.16 SEPARATION INDEX ....................................................................................................................... 74
19.17 SEPARATION PROCESSES............................................................................................................ 74
19.18 SETTLER .......................................................................................................................................... 74
19.19 SETTLING POINT............................................................................................................................. 74
19.20 SETTLING TANK.............................................................................................................................. 74
19.21 SHAREHOLDERS INVESTMENT..................................................................................................... 74
19.22 SHIFT REACTION ............................................................................................................................ 74
19.23 SHORT RESIDUE ............................................................................................................................. 74
19.24 SIDE STRIPPER ............................................................................................................................... 74
19.25 SIDESTREAM ................................................................................................................................... 74
19.26 SIEVE TRAYS................................................................................................................................... 74
19.27 SIGHT GLASS .................................................................................................................................. 75
19.28 SILVER STRIP .................................................................................................................................. 75
19.29 SLACK WAX..................................................................................................................................... 75
19.30 SLIDE VALVE ................................................................................................................................... 75
19.31 SLOPS .............................................................................................................................................. 75
19.32 SLUDGE ........................................................................................................................................... 75
19.33 SMOKE POINT ................................................................................................................................. 75
19.34 SOLAR ENERGY.............................................................................................................................. 75
19.35 SOLUBLE OIL .................................................................................................................................. 75
19.36 SOLUTION........................................................................................................................................ 75
19.37 SOLVENT ......................................................................................................................................... 75
19.38 SOLVENT EXTRACTION ................................................................................................................. 75
19.39 SOLVENT/FEED RATIO ................................................................................................................... 75
19.40 SOOTBLOWER ................................................................................................................................ 75
19.41 SOUR CRUDE .................................................................................................................................. 76
19.42 SOUR GAS ....................................................................................................................................... 76
19.43 SOUR GASOLINE ............................................................................................................................ 76
19.44 SOUR WATER .................................................................................................................................. 76
19.45 SPACE VELOCITY ........................................................................................................................... 76
19.46 SPADE .............................................................................................................................................. 76
19.47 SPALLING ........................................................................................................................................ 76
19.48 SPARGE ........................................................................................................................................... 76
19.49 SPARK ADVANCE ........................................................................................................................... 76
19.50 SPECIFIC GRAVITY ......................................................................................................................... 76
19.51 SPECIFIC HEAT ............................................................................................................................... 76
19.52 SPECTACLE..................................................................................................................................... 76
19.53 SPHERE - SEE HORTON SPHERE ................................................................................................. 76
19.54 SPLITTER ......................................................................................................................................... 76
19.55 SPOT ................................................................................................................................................ 76
19.56 STABILISATION ............................................................................................................................... 77
19.57 STABILISED GASOLINE.................................................................................................................. 77
19.58 STABILITY........................................................................................................................................ 77
19.59 STABILISER ..................................................................................................................................... 77
19.60 STADIS ............................................................................................................................................. 77
19.61 STANDARD PRESSURE.................................................................................................................. 77
19.62 STANDARD REFINERY FUEL (SRF)............................................................................................... 77
19.63 STAND-BY........................................................................................................................................ 77
19.64 STAND PIPE ..................................................................................................................................... 77
19.65 STATIC ELECTRICITY ..................................................................................................................... 77
19.66 STEAM/AIR DECOKING................................................................................................................... 77
19.67 STEAM DISTILLATION .................................................................................................................... 77
19.68 STEAM REFORMING ....................................................................................................................... 77
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 14
Printed Date: 9 July 2008
Operators Dictionary
19.69 STEEL............................................................................................................................................... 77
19.70 STONEWALL.................................................................................................................................... 78
19.71 STRAIGHT-RUN ............................................................................................................................... 78
19.72 STRAINER ........................................................................................................................................ 78
19.73 STRAPPING ..................................................................................................................................... 78
19.74 STREAM DAY................................................................................................................................... 78
19.75 STRIPPING ....................................................................................................................................... 78
19.76 STUFFING BOX................................................................................................................................ 78
19.77 SULFINOL PROCESS ...................................................................................................................... 78
19.78 SULFOLANE .................................................................................................................................... 78
19.79 SULPHATE ....................................................................................................................................... 78
19.80 SULPHIDE ........................................................................................................................................ 78
19.81 SULPHUR ......................................................................................................................................... 78
19.82 SULPHUR CEMENT ......................................................................................................................... 78
19.83 SULPHUR DIOXIDE ......................................................................................................................... 78
19.84 SULPHURIC ACID............................................................................................................................ 79
19.85 SUPERHEATER ............................................................................................................................... 79
19.86 SURFACE AREA .............................................................................................................................. 79
19.87 SURFACE TENSION ........................................................................................................................ 79
19.88 SURFACRANTS ............................................................................................................................... 79
19.89 SURGE.............................................................................................................................................. 79
19.90 SURGE DRUM .................................................................................................................................. 79
19.91 SURGE PARAMETER ...................................................................................................................... 79
19.92 SUSPENSION ................................................................................................................................... 79
19.93 SWEET GAS ..................................................................................................................................... 79
19.94 SWEETENING .................................................................................................................................. 79
19.95 SYNFUEL.......................................................................................................................................... 79
19.96 SYNTHESIS ...................................................................................................................................... 79
20 T ............................................................................................................................................................... 80
20.1 TANK CAR ........................................................................................................................................... 80
20.2 TANK FARM......................................................................................................................................... 80
20.3 TANK VOLUME.................................................................................................................................... 80
20.4 TANKAGE ............................................................................................................................................ 80
20.5 TANKER ............................................................................................................................................... 80
20.6 TEMPERATURE................................................................................................................................... 80
20.7 TEMPERATURE GRADIENT ............................................................................................................... 80
20.8 TEROMAN............................................................................................................................................ 80
20.9 TETRAETHYLLEAD (TEL)................................................................................................................... 80
20.10 TETRAMETHYL LEAD (TML) .......................................................................................................... 80
20.11 THERM.............................................................................................................................................. 80
20.12 THERMAL CRACKING..................................................................................................................... 80
20.13 THERMOCOUPLE. ........................................................................................................................... 80
20.14 THERMOSTAT.................................................................................................................................. 80
20.15 TOLUENE C6H5CH3 ........................................................................................................................ 81
20.16 TONNAGE (MARINE) ....................................................................................................................... 81
20.17 TOPANOL......................................................................................................................................... 81
20.18 TOPS ................................................................................................................................................ 81
20.19 TORQUE ........................................................................................................................................... 81
20.20 TOTAL ORGANIC CARBON (TOC) ................................................................................................. 81
20.21 TOTAL SUSPENDED SOLIDS (TSS)............................................................................................... 81
20.22 TOWER ............................................................................................................................................. 81
20.23 TRANSFER LINE.............................................................................................................................. 81
20.24 TRANSFORMER OIL........................................................................................................................ 81
20.25 TRAP ................................................................................................................................................ 81

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 15
Printed Date: 9 July 2008
Operators Dictionary
20.26 TRAYS .............................................................................................................................................. 81
20.27 TREATING PROCESSES ................................................................................................................. 81
20.28 TRIP SYSTEM................................................................................................................................... 82
20.29 TRYCOCKS ...................................................................................................................................... 82
20.30 TURBINE .......................................................................................................................................... 82
20.31 TURBINE OIL ................................................................................................................................... 82
20.32 TURBOJET ENGINE ........................................................................................................................ 82
20.33 TURNAROUND................................................................................................................................. 82
20.34 TURN DOWN .................................................................................................................................... 82
21 U............................................................................................................................................................... 83
21.1 ULLAGE ............................................................................................................................................... 83
21.2 UNSATURATED................................................................................................................................... 83
21.3 UPPER EXPLOSIVE LIMIT .................................................................................................................. 83
21.4 UPSTREAM.......................................................................................................................................... 83
22 V............................................................................................................................................................... 84
22.1 V50 ....................................................................................................................................................... 84
22.2 VACUUM .............................................................................................................................................. 84
22.3 VACUUM DISTILLATION..................................................................................................................... 84
22.4 VALENCE............................................................................................................................................. 84
22.5 VALVE .................................................................................................................................................. 84
22.6 VALVE TRAYS ..................................................................................................................................... 84
22.7 VAPOUR............................................................................................................................................... 84
22.8 VAPOUR DENSITY .............................................................................................................................. 84
22.9 VAPOUR LINE ..................................................................................................................................... 84
22.10 VAPOUR LOCK ................................................................................................................................ 84
22.11 VAPOUR PHASE.............................................................................................................................. 84
22.12 VAPOUR PRESSURE (AT GIVEN TEMPERATURE) ...................................................................... 84
22.13 VAPORISATION ............................................................................................................................... 84
22.14 VENTURI METER ............................................................................................................................. 85
22.15 VENTURI TUBE ................................................................................................................................ 85
22.16 VISCOSIMETER ............................................................................................................................... 85
22.17 VISCOSITY ....................................................................................................................................... 85
22.18 VISCOSITY INDEX ........................................................................................................................... 85
22.19 VOLATILE......................................................................................................................................... 85
23 W.............................................................................................................................................................. 86
23.1 WASH OILS.......................................................................................................................................... 86
23.2 WASH WATER..................................................................................................................................... 86
23.3 WASTE HEAT BOILER........................................................................................................................ 86
23.4 WATER BOTTOM ................................................................................................................................ 86
23.5 WATER SOFTENING ........................................................................................................................... 86
23.6 WAXY DISTILLATE.............................................................................................................................. 86
23.7 WEAR................................................................................................................................................... 86
23.8 WEATHERING ..................................................................................................................................... 86
23.9 WEIGHTED AVERAGE BED TEMPERATURE (WABT)...................................................................... 86
23.10 WEIR................................................................................................................................................. 86
23.11 WET GAS.......................................................................................................................................... 86
23.12 WHESSOE ........................................................................................................................................ 86
23.13 WHITE OIL........................................................................................................................................ 86
23.14 WHITE PRODUCTS.......................................................................................................................... 86
23.15 WHITE SPIRITS ................................................................................................................................ 86
23.16 WIDE RANGE DISTILLATE.............................................................................................................. 87
23.17 WORK SAFE AUDIT......................................................................................................................... 87
24 X............................................................................................................................................................... 88
24.1 XRAY.................................................................................................................................................... 88
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 16
Printed Date: 9 July 2008
Operators Dictionary
24.2 XYLENE C6H4 (CH) 2 ............................................................................................................................ 88
25 Y............................................................................................................................................................... 89
25.1 YARD PIPE (YP)................................................................................................................................... 89
25.2 YIELD ................................................................................................................................................... 89
26 REGULARLY USED ABBREVIATIONS .................................................................................................. 90
27 REFINERY THROUGHPUT 1989 AND 1998 ........................................................................................... 95
28 REFINERY STATISTICS.......................................................................................................................... 97

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 17
Printed Date: 9 July 2008
Operators Dictionary
1 A

1.1 ABSOLUTE PRESSURE


Pressure measured with respect to zero pressure, as distinct from pressure measured with respect to
some standard pressure such as atmospheric pressure. Thus, 2 Bar gauge (i.e. atmospheric) is equivalent
to 3 Bar absolute. (Atmospheric pressure being 1 bar absolute).

1.2 ABSOLUTE TEMPERATURE


A temperature at which zero is a condition absolutely free of heat and equivalent to -459oF or –273oC. To
convert temperature on Fahrenheit or centigrade scales to degrees absolute, add 459 or 273 respectively.

1.3 ABSORPTION PROCESS


A separation process, a weak chemical reaction, by which certain components of a gas are condensed in
an absorption liquid (lean oil) with which the gas is brought into contact. The absorption liquid with the
absorbed components is called fat oil. The fat oil leaves the bottom of the absorber and is separated from
the absorbed components in a following fractionator (Regenerator) whence the fresh lean oil is returned to
the absorber. For example, Adip and Sulfinol Processes for H2S + CO2 removal.

1.4 ACCELERATOR
1. A substance that hastens a reaction, usually by acting as a catalyst, as in the vulcanization of
rubber.

2. Any of several automobile attachments for increasing the speed at will, especially a foot-
operated throttle.

1.5 ACCUMULATOR
A vessel for the temporary storage of a gas or liquid; usually used for collecting sufficient material for a
continuous charge to some refining process.

1.6 ACETYLENE C2H2


A highly unsaturated hydrocarbon gas usually made by the action of water on calcium carbide and by
pyrolysis of natural gas. It is largely used in industry for cutting and welding metals. Several important
intermediates have been synthesised from acetylene but a cheaper route via ethylene has now been
developed for many of them.

1.7 ACID
A member of an important and fundamental category of chemical substances characterised by having an
available reactive hydrogen and requiring an alkali to neutralise them. Acid solutions usually have a sour,
biting and tart taste, like vinegar.

1.8 ADDITIVE
A substance added to a product in order to improve its properties.

1.9 ADIP
Shell trade name for aqueous DIPA solution.

1.10 ADIP TREATING


A process for removal of hydrogen sulphide from hydrocarbon gases and LPG by a specific regenerable
solvent.
Carbon dioxide and, to a certain extent, carbonyl sulphide can be removed at the same time. The solvent
employed is an aqueous DIPA solution.

1.11 ADSORPTION PROCESS


A fractionation process based on the fact that certain highly porous materials preferentially adsorb certain
types of molecules on their surface, e.g. PSA units.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 18
Printed Date: 9 July 2008
Operators Dictionary
1.12 AEROBIC
Existing in the presence of oxygen.

1.13 AEROMETER
An instrument for ascertaining the weight or density of air or other gases.

1.14 AGGREGATE
As applied to non-bituminous materials, the inert material, such as sand, gravel, or broken stone, with
which cementing material is mixed to form a mortar or concrete.

1.15 AIR-BLOWN ASPHALT


Asphalt produced by blowing air through residual oils or similar mineral oil products at moderately elevated
temperatures.

1.16 AIR HEAT EXCHANGER


A heat exchanger in which air is used as the cooling medium.

1.17 AIR SWEETENING


In this process sour gasoline fractions are sweetened by dissolving air in the hydrocarbon phase followed
by contacting with a strong NaOH aqueous solution. The reaction products formed are disulphides which
dissolve in the sweetened gasoline and water remaining in the aqueous phase.

1.18 ALCOHOLS
A class of organic compounds containing oxygen (as a hydroxyl), of which ethyl alcohol (the alcohol of
potable spirits and wines) is the best known. They can react with acids to form esters. They are largely
used as solvents.

1.19 ALGAE
Plants of the group comprising practically all seaweed’s and allied freshwater or nonaquatic forms, such as
pond scum’s, stoneworts, etc.

1.20 ALIPHATIC HYDROCARBONS


Hydrocarbons in which the carbon atoms are arranged in open chains, which may be branched. The term
includes paraffins and olefins and provides a distinction from aromatics and naphthenes which have at
least some of their carbon atoms arranged in closed rings.

1.21 ALKALI
In chemistry, any substance having marked basic properties. In its restricted and common sense, the term
is applied only to hydroxides of ammonium, lithium, potassium, and sodium. They are soluble in water,
they have the power of neutralising acids and forming salts with them and of turning red litmus blue. In a
more general sense, the term is also applied to the hydroxides of the so-called alkaline earth metals -
barium, calcium, and strontium.

1.22 ALKALI TEST


A test to determine the presence or absence of free alkali in finished oils after chemical purification.

1.23 ALKALINE
Having the properties of an alkali; opposite to acidic.

1.24 ALKALINITY
The amount of free alkali in any substance.

1.25 ALKYLATION
A reaction in which a straight-chain or branched-chain hydrocarbons group, which is called an alkyl group
or radical, is united with either an aromatic molecule or a branched-chain hydrocarbon. Used for detergent
or petroleum manufacture. Usually catalysed by Hydrofluoric or Sulphuric acid.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 19
Printed Date: 9 July 2008
Operators Dictionary
1.26 ALLOY
A substance composed of two or more metals, or of a metal and a nonmetal, intimately united, usually by
being fused together and dissolved in each other when molten.

1.27 AMERICAN PETROLEUM INSTITUTE


An association incorporated in the United States, having as its object the study of the arts and sciences connected with the
petroleum industry in all its branches and the fostering of foreign and domestic trade in American petroleum products.

1.28 AMERICAN SOCIETY FOR TESTING MATERIALS


An association incorporated in the United States for promoting knowledge of the properties of engineering materials and
for standardising specifications and methods of testing.

1.29 AMINE
Hydrocarbon with attached Ammonia group having absorbent properties, making it useful in treatment processes
(ADIP, SULFINOL).

1.30 AMMONIA NH3


Ammonia is manufactured by the direct combination of hydrogen and nitrogen under pressure over a catalyst.
Anhydrous ammonia is mainly used for the manufacture of nitrogenous fertilisers, but is used at NZRC for pH
control in various processes. A colourless, gaseous compound, NH3 is of extremely pungent smell and taste and is
very soluble in water.

1.31 ANAEROBIC
Existing in an oxygen free condition.

1.32 ANALYSIS
The process of determining the composition of a substance by chemical or physical methods.

1.33 ANHYDROUS
Free of water.

1.34 ANILINE POINT


The minimum temperature for complete miscibility of equal volumes of the chemical aniline and a petroleum
product. In conjunction with API gravity the aniline point may be used to calculate the net heat of combustion of
aviation fuels or the diesel index of diesel fuels. The lower temperature at which an oil product is completely
miscible with aniline in a 1:1 volumetric ratio.

1.35 ANNEALING
Heating and slowly cooling to increase the ductility or remove internal stresses, as of metal or glass.

1.36 ANTIFOAM AGENT


An additive used for controlling foam. Antifoam agents are used in some lubricating oils. At NZRC, used as
additives in ADIP, Sulphinol and BDU Units.

1.37 ANTI-KNOCK
An adjective signifying resistance to detonation (pinking) in spark-ignited internal combustion engines. Anti-knock
value is measured in terms of octane number of gasoline engines and of cetane number for diesel fuels.

1.38 ANTI-KNOCK AGENT


A chemical compound such as tetramethyl-lead which, when added in small amounts to the fuel charge of an
internal-combustion engine, tends to lessen knocking.

1.39 ANTIOXIDANT
A chemical added to gasoline, lubricating oil, etc. to inhibit oxidation.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 20
Printed Date: 9 July 2008
Operators Dictionary
1.40 ANTI-STATIC ADDITIVE
An additive for reducing static properties, notably in Kerosene.

1.41 API GRAVITY


In the USA an arbitrary scale known as the API degree is used for reporting the gravity of a petroleum product. The
degree API is related to the specific gravity scale (15°C/15°C) by the formula:

141.5
Degree API = Sp. Gr. 15°C/15°C - 131.5

1.42 AROMATIC BLEND


A mixture made by the addition of a component or stock essentially aromatic in nature to impart to the mixture some
property of the aromatic.

1.43 AROMATICS
A group of hydrocarbons characterised by their having at least one ring structure of six carbon atoms, each of the
latter having one valency outside the ring. If these valencies are occupied by hydrogen atoms, hydrocarbon radicals,
or inorganic groups one speaks of condensed aromatics. These hydrocarbons are called aromatics because many of
their derivatives have an aromatic odour. They are of relatively high specific gravity and possess good solvent
properties. Certain aromatics have valuable anti-knock characteristics. Typical aromatics are: benzene, toluene,
xylene, phenol (all mono-aromatics) and naphthalene (a di-aromatic). Aromatics can cause smoke and freeze point
problems in Kerosene.

1.44 ASH
The solid residue left when combustible material is thoroughly burned.

1.45 ASH CONTENT


The percent by weight of residue left after combustion of a sample of a fuel oil or other petroleum oil.

1.46 ASPHALT
This term may have several meanings:

1. It refers to a mixture of bitumen and mineral aggregate, as prepared for the construction of roads or for other
purposes.

2. In the United States it refers to the product which is known as bitumen elsewhere. Black to dark-brown solid
or semisolid cementitious material which gradually liquefies when heated and in which the predominating
constituents are bitumens. These occur in the solid or semisolid form in nature: are obtainable by refining
petroleum; or are combinations with one another or with petroleum or derivatives thereof.

3. At NZRC - very heavy fuel oil produced as bottom product from BDU (short residue with DAO removed).

1.47 ASPHALTENES
Polyaromatic constituents of asphaltic bitumen characterised by being insoluble in aromatic-free low-boiling
petroleum spirit, but soluble in carbon disulphide.

1.48 ASPHALTIC BASE CRUDE OILS


Crude oils which contain little or no paraffin wax but usually contain asphaltic matter. Now often referred to as
naphthene base crude oils.

1.49 ASPHALTIC BITUMEN


The full name for bitumen adopted by the Permanent International Association of Road Congresses.

1.50 ASPIRATOR
An apparatus which serves to create a partial vacuum through pumping a jet of water, steam, or some other fluid or
gas past an orifice opening out of the chamber in which the vacuum is to be produced.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 21
Printed Date: 9 July 2008
Operators Dictionary
1.51 ASSOCIATED NATURAL GAS
Natural gas associated with oil accumulations by being dissolved in the oil under the reservoir temperatures and
pressures (solution gas) and often also be forming a gas cap of free gas above the oil (gas cap gas).

1.52 ASTM DISTILLATION


Any distillation made in accordance with an ASTM distillation procedure; and, especially, a distillation test made on
such products as gasoline and kerosene to determine the initial and final boiling points and the boiling range.

1.53 ASTM GUM TEST


1. An analytical method for determining the amount of existing gum in a gasoline by evaporating a sample from
a glass dish on an elevated temperature bath with the aid of circulating air.

2. Any gum test carried out in accordance with an ASTM gum test procedure.

1.54 ASTM MELTING POINT


The temperature at which wax first shows a minimum rate of temperature change, also known as the English melting
point.

1.55 ATMOSPHERIC PRESSURE


1. The pressure of air.

2. More specifically, the pressure of the air at sea level.

3. As a standard, the pressure at which the mercury barometer stands at 760mm, or 30in. (equivalent to approx.
14.7 psi).

1.56 ATOM
The smallest complete particle of an element which can be obtained, yet retain all physical and chemical properties
of the element. According to present theory, the atom consists of a nucleus of neutrons and positively charged
protons, surrounded by negatively charged particles called electrons.

1.57 ATOMISE\
To divide a liquid into extremely minute droplets, either by impact with a jet of steam or compressed air, or by
passing through some mechanical device.

1.58 ATTEMPERATOR\
See Desuperheater.

1.59 ATTRITION\
The act of wearing out by rubbing or grinding, or the state of being so worn or ground. Granular catalysts or
absorbents may suffer such attrition as a result of movement.

1.60 AUTO IGNITION POINT


The temperature at which the vapour given off by a sample will ignite in air without any ignition source.

1.61 AVERAGE BOILING POINT


Unless otherwise indicated, the sum of the ASTM distillation temperatures in steps of 10°C from the 10-percent
point to the 90-percent point, inclusive, divided by 9. Sometimes half the initial and half the maximum distillation
temperatures are also added, and the sum then divided by 10.

1.62 AVGAS
High octane aviation gasoline for piston type engine. Not made by NZRC.

1.63 AVIATION GASOLINE


Any of the special grades of gasoline suitable for use in certain aeroplane engines. Not made by NZRC.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 22
Printed Date: 9 July 2008
Operators Dictionary
1.64 AVTAG
Wide range aviation turbine fuel, gasoline type, about identical to the JP 4 type fuel. Not made by NZRC.

1.65 AVTUR
Kerosene type aviation turbine fuel, (Jet A1).

1.66 AZEOTROPE
Two (or more) components are said to form an azeotrope if there is a mixture of those components which has no
boiling range but whose boiling point and dew point are the same.

1.67 AZEOTROPIC DISTILLATION


A distillation process characterised by the fact that the relative position of the components boiling points is
influenced by the addition of a compound which selectively forms an azeotrope with one or a group of the
components. The added compound is called the azeotrope former. E.g. furfural, used in the extraction of aromatics,
forms an azeotrope with water.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 23
Printed Date: 9 July 2008
Operators Dictionary
2 B

2.1 BACK PRESSURE


1. The pressure on the outlet or downstream side of a flowing system.

2. In an engine, the pressure which acts adversely against the piston, causing loss of power.

2.2 BAFFLE
A partial restriction, generally a plate, located so as to change direction, guide the flow, or promote mixing within the
equipment in which it is installed.

2.3 BALANCED DRAUGHT


A method of furnace air control using both forced and induced draught fans.

2.4 BAR OVER


To manually or mechanically rotate a compressor or turbine to ensure free movement or enable even heating/cooling.

2.5 BAROMETER
An instrument employed to determine atmospheric pressure.

2.6 BAROMETRIC CONDENSER


A device for condensing steam by direct contact with water. It produces a partial vacuum in refinery equipment such
as a vacuum distillation unit.

2.7 BAROMETRIC LEG


Water filled tube for sealing vacuum systems. (See also Liquid Seal).

2.8 BARREL
A standard measure of crude oil quantities; equivalent to 35 imperial gallons, 42 US gallons or 159 litres.

2.9 BASIC SEDIMENT AND WATER


The heavy material which collects in the bottom of storage tanks, usually composed of oil, water, and foreign matter.
Also called bottoms, bottom settlings, etc. It is measured in all incoming feedstocks.

2.10 BATCH
Any quantity of material handled or considered as a unit in processing.

2.11 BATCH PROCESS


Any process in which a quantity of material is handled or considered as a unit. Such processes involve intermittent,
as contrasted to continuous operation.

2.12 BATTERY
A series of individual items of refinery equipment operated as a unit.

2.13 BATTERY LIMITS


A term used when a unit or a battery is to be built in a refinery by an outside contractor or construction company. It
specifies the area within which the contractor shall supply all services, and defines the limits beyond which this shall
be done by the refinery. Also defines plant interface limits.

2.14 BEARING
A support for holding a shaft in its correct position. Examples: journal bearings to confine radial motion, thrust
bearings to control axial movement, and "rolling element" bearings which are used in both services.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 24
Printed Date: 9 July 2008
Operators Dictionary
2.15 BENZENE C6H6
The parent compound of the aromatic hydrocarbon series. It is used in the manufacture of a large number of
chemicals including phenol, styrene, detergent alkylate and insecticides and is a major component of platformate.

2.16 BIOCHEMICAL OXYGEN DEMAND (BOD)


Important water test that shows the amount of bio-degradable matter in the water. Amount of oxygen required by
aerobic organisms for breakdown of organic matter in water over a 5 day period.

2.17 BIODEGRADATION
Degradation of solid materials by bacterial consumption.

2.18 BIOTREATER
Process for biological degradation of effluent water.

2.19 BITUMEN
A non-crystalline solid or semi-solid cementitious material derived from petroleum, consisting essential of
compounds composed predominantly of hydrogen and carbon with some oxygen and sulphur, it gradually softens
when heated. Bitumen’s are black or brown in colour. They may occur naturally or may be made as end products
from the distillation of, or as extracts from, selected petroleum oils.

2.20 BLACK PRODUCTS


Fuel oils, bitumen’s and residues.

2.21 BLANK - See Spade

2.22 BLEEDING
Divert or release a small portion of the material contained in a line or vessel, usually by opening a valve slightly.

2.23 BLEND
Any mixture prepared for a special purpose, e.g. the products of a refinery are blended to suit market requirements.

2.24 BLENDED FUEL OIL


A mixture of residual and distillate fuel oils.

2.25 BLENDING
Mixing of the various components in the preparation of a product of required properties.

2.26 BLENDING STOCK


Any of the stocks used to make commercial gasoline. These include: straight-run gasoline, cracked gasoline, and
synfuel among others.

2.27 BLENDING VALUE (ANTI-KNOCK)


Some anti-knock blending agents possess the property of apparently increasing the rated octane number of certain
gasoline base stocks to a higher octane number than their own value in terms of octane numbers. This property is
known as the blending value.

2.28 BLOCK VALVE


A valve used for isolation of equipment.

2.29 BLOCKED OPERATION


The use of a single process unit alternately in more than one operation.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 25
Printed Date: 9 July 2008
Operators Dictionary
2.30 BLOWBACK
A system in which a liquid or a gas is continuously bled through the lead lines of an instrument meter into the main
line. This prevents the main line fluid from coming in contact with the meter body, thus eliminating vaporisation,
corrosion or plugging.

2.31 BLOW-BY
In internal-combustion engines, the escape of combustion gases or unburned fuel from the combustion chamber past
the pistons and rings into the crankcase during the power stroke or the compression stroke.

2.32 BLOWDOWN
The act of flushing or clearing a piece of pressurised equipment by blowing to a drain (or similar). Term is often used
by Boilermen, continuos blowdown indicating blowdown from the Steam Drum or Scum level, and Intermittent
Blowdown from the bottom header of a boiler.

2.33 BLOWER
Usually an enclosed fan used in a forced/induced/balanced draught furnace to provide the combustion air.

2.34 BLOWN BITUMEN


A type of bitumen prepared by the oxidation of short residues, normally by blowing air at an elevated temperature.

2.35 BLUE SMOKE


A blue exhaust smoke from a diesel engine, indicating that only a part of the fuel is being burned; also called cold
smoke.

2.36 BOILING POINT (AT A GIVEN PRESSURE)


The temperature at which a liquid, contained in a closed vessel under a given pressure, will form a first bubble of
vapour on the addition of heat. Further heating of the liquid at its boiling point results in evaporation of part or all of
the liquid.

2.37 BOILING RANGE


Petroleum products (which are mixtures of many compounds, each having a different boiling point) do not have a
simple boiling point but have a boiling range instead, i.e. the temperature range from boiling point to dew point.

2.38 BOMB
A small pressure vessel, such as used for taking samples of HP gases and LPG.

2.39 BOND
1. Chemically, a unit link between atoms. In graphic chemical formulas, it is often represented by a short line or
dash.

2. Electrically, a common grounding system e.g. Bonding wires used between fuel tanker and petrol station
ground tanks or airport delivery systems and aircraft.

2.40 BOOSTER STATION


An auxiliary station consisting of suitable storage tanks, motive power and pumps for pumping oil through pipelines.

2.41 BOTTLED GAS


Ordinarily, butane or propane, or butane-propane mixtures, liquefied and bottled under pressure for domestic use.

2.42 BOTTOMS
The bottom product from a distillation of petroleum; also the liquid layer left in a tank or similar container after
draining to the level of the pump suction.

2.43 BOX-IN
To isolate a piece of equipment, usually by block valves.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 26
Printed Date: 9 July 2008
Operators Dictionary
2.44 BOX-UP
The act of closing up a piece of refinery equipment following construction, maintenance, inspection etc.

2.45 BRAKE HORSEPOWER


That horsepower delivered by an engine to a brake or dynamometer. It is less than the indicated horsepower by the
amount lost in transmission bearings, gear teeth, belts, etc.

2.46 BREAKER POINT


The point of contact actuated by a cam to break the primary circuit in the ignition system and thereby cause a current
surge in the secondary circuit which produces the spark.

2.47 BREATHING
When a storage tank containing volatile products is heated by solar radiation, some of the liquid contents evaporate.
The excess vapour thus formed is blown out to the atmosphere. On cooling, the less volatile components of the
vapour contents condense and a slight vacuum is created, causing air from outside to be sucked into the tank. This
double action is referred to as "breathing" of the tank. The movement of gas (oil vapours or air) in and out of the
vent lines of storage tanks as a result of alternate heating and cooling.

2.48 BRINE
Water which is nearly saturated with salts.

2.49 BRITISH THERMAL UNIT (BTU)


The quantity of heat required to raise the temperature of 1lb of water through 1°F. 1.000 Btu = 252 kcal.

2.50 BRITOLITE
A drying solvent used by BP. Manufactured from hydrocracked Naphtha and Tops.

2.51 BUFFER
1. A vessel for temporary storage of liquid (buffer drum).

2. A chemical used to maintain another within set limits of (e.g.) pH.

3 A device to polish the floor.

4 An old Navel name for a person in-charge of the deck of a Ship.

2.52 BUG COUNT


Microscopic estimation of active bacteria in a sample.

2.53 BULK CRUSHING STRENGTH


Test to determine the mechanical strength of a catalyst.

2.54 BULK DENSITY


The weight of solid particles which can be held by a container of known dimensions compared to the weight of water
which can be held by the same container.

2.55 BUND WALL


See Fire Wall.

2.56 BUNKER FUEL


Any fuel oil or diesel fuel taken into the bunkers of ships.

2.57 BURNING OIL


An illuminating oil, such as kerosene, mineral seal oil, etc. suitable for burning in a wick lamp.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 27
Printed Date: 9 July 2008
Operators Dictionary
2.58 BUTANE C4H10
Commercial butane is a mixture of two gaseous paraffins, normal butane and isobutane. When blended into gasoline
in small quantities it improves volatility and octane number. Butane can be stored under pressure as a liquid at
atmospheric temperatures ("bottled gas") and it is widely used for cooking and domestic heating. Used at NZRC in
the reformer and BDU.

2.59 BUTANE DE-ASPHALTING


A solvent extraction process whereby a short residue is split into components having low (D.A.O.) and high
(Asphalt) asphaltic content by contact with liquid butane.

2.60 BYPRODUCT
A secondary or additional product not of primary importance. (e.g. Sulphur).

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 28
Printed Date: 9 July 2008
Operators Dictionary
3 C

3.1 C1,C2,C3,C4,C5
A common way of representing fractions containing a preponderance of hydrocarbons of 1, 2, 3, 4 or 5 carbon atoms,
respectively, without reference to hydrocarbon type.

3.2 CALIBRATION
The determination of fixed reference points on the scale of any instrument by comparison with a known standard and
the subsequent subdivision or graduation of the scale to enable measurements in definite units to be made with it.
Also the process of measuring or calculating the volumetric contents or capacity of a receptable.

3.3 CALMING SECTION TRAYS


Fractionating trays characterised by the presence of calming sections on a tray of the grid, sieve or valve variety
(hence the names: c.s. gridtray, c.s. sieve tray and c.s. valve tray). Calming sections are actually downcomers,
carefully designed and distributed over the tray area so as to ensure the best distribution of liquid.

3.4 CALORIE
The amount of heat required to raise the temperature of 1 gram of water through 1 C (from 14.5 to 15.5 C). In
calculations the k calorie, equal to 1,000 calories is often used. 1,000 kilocalories = 3,968 Btu.

3.5 CALORIFIC VALUE


The calorific value of a combustible material is the quantity of heat produced by complete combustion of unit weight
of the material. The units in which the calorific value is usually given are (a) calories per gram and (b) British
Thermal Units per pound. The systems may be converted by the relationship:
1 calorie per gram = 1.8 Btu per lb.

3.6 CANDLEPOWER
The illuminating power of a standard candle employed as a unit for determining the illuminating quality of kerosene
and other illuminants. One international candle or one American candle equals 1.11 Hefner candles.

3.7 CAPILLARITY
That physical action by which the surface of a liquid, where it is in contact with a nonhorizontal solid surface (as in
vertical capillary tube), is elevated above or depressed below the level of the liquid. Its magnitude is determined by
the interfacial tensions involved.

3.8 CARBON
A nonmetallic element existing in diamonds, graphite, and numerous amorphous forms; combined as carbon dioxide,
carbonates, and in all living things. Carbon is unique in forming an almost infinite number of compounds (it is
present in all organic compounds).

3.9 CARBON (FIXED CARBON)


In the case of coal, coke, and bituminous materials, the solid residue other than ash contained by destructive
distillation.

3.10 CARBON DEPOSIT


Engine deposits containing soot from over-rich fuel mixtures and the carbon residue and tars from decomposed
lubricating oil. Road dust, metal particles, gum and tarry substances also form a part of such deposits.

3.11 CARBON DIOXIDE


A heavy, colourless gas, CO2, which will not support combustion. Dissolved in water, it forms carbonic acid. It is
exhaled by lung-possessing animals as a waste gas, but is inhaled by certain plants which absorb its carbon and
release its oxygen as a waste gas.

3.12 CARBON MONOXIDE


A colourless, odourless gas, CO; a product resulting from the incomplete combustion of carbon. It is very poisonous.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 29
Printed Date: 9 July 2008
Operators Dictionary
3.13 CARBURETTOR
A device for metering the correct mixture of air and gasoline to an internal-combustion engine.

3.14 CARRYOVER
Relatively nonvolatile contaminating material which is carried over by the overhead effluent from a fractionating
column, absorber, or reaction vessel. It may be carried as liquid droplets or finely divided solids suspended in a gas,
a vapour, or a discrete liquid.

3.15 CASCADE TRAY


A fractionating device consisting of a series of parallel troughs arranged in stair-step fashion. Liquid from the tray
above enters the uppermost trough. Liquid thrown from this trough by vapour rising from the tray below impinges
against a plate and a perforated baffle. Liquid passing through the baffle enters the next lower of the troughs.

3.16 CATALYSIS
The alteration of the rate of a chemical reaction by the presence of a "foreign" substance (catalyst) that remains
unchanged at the end of the reaction.

3.17 CATALYST
In technology this word means a substance added to a system of reactants which will accelerate the desired reactions,
while emerging virtually unaltered from the process. The catalyst allows the reaction to take place at a temperature
at which the uncatalyzed reaction would proceed too slowly for practical purposes. Used extensively in secondary
processes.

3.18 CATALYST POISON


Generally, coverage of the catalyst surface with nonreactants. If a large fraction of the catalyst surface is covered
selectively by any one strongly adsorbed chemical, the catalytic reaction will be drastically reduced in rate. This
circumstance is called poisoning, and self-poisoning can result when one reactant or product is much more strongly
adsorbed than another reactant. May be reversible, but can destroy entire catalyst inventory.

3.19 CATALYTIC PROCESS


Any process which employs catalysis. Examples : Hydrocracking, Platforming and hydrotreating.

3.20 CATALYTIC REFORMING


Process of changing the molecular structure of the components of straight-run gasoline or of a gasoline fraction by
subjecting the gasoline to thermal treatment in the presence of a catalyst (for example platinum). By this process the
anti-knock performance of the gasoline is improved.

3.21 CATHODIC PROTECTION


Method of protecting tanks, ships, pipelines and jetties against corrosion. By reversing the electric current which
flows away from a corroding metal, a corrosion process can be arrested.

3.22 CAUSTIC SODA


The name used in industry for sodium hydroxide (NaOH) on account of its property of corroding the skin. It is
strongly alkaline. Used extensively in water treatment or pH control in process units.

3.23 CENTRIGRADE (CELSIUS) SCALE


A thermometer scale on which the interval between the freezing point and boiling point of water is divided into 100
parts or degrees centigrade, so that 0 C corresponds to 32 F and 100 C to 212 F. Also called Celsius after
Anders Celsius who first described it.

3.24 CENTIPOISE, CENTISTOKES


A Centipoise (cP) is 1/100th of a poise (P) which is the fundamental unit of dynamic viscosity in the
centimetre-gram-second system of units. The viscosity of water at 20 C is approximately 1 cP. The centistokes
(cS) is 1/100th of a stoke (S) which is the fundamental unit of Kinematic viscosity in that system. The two c
viscosity’s are related by the density, i.e. number of centistokes = number of Centipoise divided by liquid density (in
g/cm3).

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 30
Printed Date: 9 July 2008
Operators Dictionary
3.25 CENTRIFUGAL COMPRESSOR
A machine in which pressure is built up by means of rotating fans or blades.

3.26 CENTRIFUGAL PUMP


A pump that derives its pressure increase from the centrifugal force generated when the impeller throws the liquid
outwards at high speed.

3.27 CENTRIFUGE
A whirling instrument for separating liquids and solids or liquids of different specific gravity by use of centrifugal
force.

3.28 CERAMIC BALLS


Balls of chemically inert ceramic, used as filler and support in reactors etc.

3.29 CETANE NUMBER


The cetane number of a diesel fuel is a number equal to the percentage by volume of cetane in a mixture with
alph-methyl-naphthalene having the same ignition quality as the fuel under test.

3.30 CFR ENGINE


A standard single-cylinder variable compression engine developed by the Co-operative Fuel Research Council, to
determine the anti-knock value of motor gasoline’s or the ignition quality of diesel fuels.

3.31 CHANNELING
Non uniform flow of process fluid through (e.g.) a reactor bed.

3.32 CHARACTERISATION
Identifying a feed or product by its properties e.g. distillation,
carbon: hydrogen ration, density etc.

3.33 CHAR VALUE


In the 24 hours kerosene burning test the amount of char formed on the wick under prescribed conditions is measured
and reported as mg/kg.

3.34 CHECK VALVE (NON RETURN VALVE)


An automatic valve which permits fluids to pass in one direction but closes when the fluids attempt to pass in the
opposite direction.

3.35 CHEMICAL OXYGEN DEMAND (COD)


Total amount of oxygen needed for oxidation of all organic matter in water to CO2 and H2O.

3.36 CHLORINATION
A chemical reaction in which chlorine reacts with hydrocarbon and one or more of the hydrogen atoms are replaced
by atoms of chlorine, or chlorine reacts with an unsaturated hydrocarbon and two chlorine atoms (one molecule) are
added to the double bond.

3.37 CHROMOMETER - See Colorimeter

3.38 CLADDING
A homogeneous bonded or resistance-welded metallic liner applied to a base metal such as carbon steel. Used in
lines, vessels, and heat exchanger equipment to reduce corrosion and increase service life. Also called clad lining.

3.39 CLAUS PROCESS


Process for the manufacture of sulphur from H2S, comprising oxidation of part of the H2S to SO2 in a thermal
reaction stage, followed by catalytic reaction of the remaining H2S with the SO2 formed to give sulphur.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 31
Printed Date: 9 July 2008
Operators Dictionary
3.40 CLEAR GASOLINE
A gasoline which is free from anti-knock additives such as tetraethyl-lead. In making comparative engine tests
between leaded and unleaded fuels, the clear, unleaded gasoline is sometimes referred to as straight gasoline base,
base fuel, or as gasoline "neat".

3.41 CLOUD POINT


The temperature at which a fuel, when cooled, begins to congeal and present a cloudy appearance owing to the
formation of minute crystals of wax.

3.42 COAGULATION
The precipitation from solution or suspension of fine particles which tend to unite in clots or curds.

3.43 COALESCER
A vessel packed with steelwool, glasswool, polypropylene wool or felt used to remove fine droplets of treating
liquids or water from a petroleum product.

3.44 COASTAL TANKER Ltd- (CTL)


A Company responsible for coastal tanker movements in NZ

3.45 COEFFICIENT OF EXPANSION


The ratio of the increase of length, area, or volume of a body for a given rise in temperature (usually 1 F) to the
original length, area, or volume of the body.

3.46 COFFERDAMS
The empty spaces fore and aft in a tanker, which traverse the whole breadth of the vessel and isolate the cargo tanks
from the rest of the ship (fire protection).

3.47 COKE
Hard carbon deposit, usually formed by the unintentional thermal cracking of heavy residues.

3.48 COKE DRUM


A vessel in which coke is formed or collected and which can be cut off from the process for cleaning.

3.49 COLD FILTER PLUGGING POINT


The highest temperature at which a fuel ceases to flow through a test filter.

3.50 COLORIMETER
An instrument for determining the colour of oil product by measuring the percentage transmission of monochromatic
light through the liquid.

3.51 COMBINED FEED RATIO (CFR)


The ratio of the 2nd to 1st stage feed on the Hydrocracker.

3.52 COMBUSTION
The process of burning; rapid oxidation caused by the union of the oxygen of the air with a material.

3.53 COMBUSTION CHAMBER


The space in which the process of burning takes place e.g. in a jet engine.

3.54 COMPATABILITY
Ability of additives or products to mix together without separation or reaction.

3.55 COMPOUND
A substance formed by the combination of two or more ingredients in definite proportions by weight, and possessing
physical and chemical properties entirely different from those of the ingredients. e.g. table salt, paint.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 32
Printed Date: 9 July 2008
Operators Dictionary
3.56 COMPRESSION
In general, the act of increasing the pressure on gas or vapour. It is usually attended by a reduction in volume.

3.57 COMPRESSION IGNITION


The combustion which takes place when fuels are injected in a fine spray into the hot compressed air (500 C) in the
cylinder of a diesel (compression ignition) engine. The heating of the air is due to its rapid compression by the
piston.

3.58 COMPRESSION RATIO


The ratio of the cylinder volume when the piston of an engine is at the crank end of the cylinder, to the volume when
the piston is at the head end.

3.59 COMPRESSOR
A device which draws in air or other gases, compresses it and discharges it at a high pressure.

3.60 CONDENSATE
Liquid hydrocarbons which are sometimes produced together with natural gas. In general: the liquid that is formed
when a vapour cools.

3.61 CONDENSATION (PHYSICAL)


The transfer of a material from the vapour phase into the liquid phase, for example by the withdrawal of heat.

3.62 CONDENSER
A special type of heat exchanger for the removal of heat from e.g. the top of a fractionating column.

3.63 CONDENSER BOX


A large box-shaped structure in which the condenser, which may consist of coils or tubes, is submerged in a
heat-absorbing medium, usually water.

3.64 CONDUCTIVITY
A materials ability to conduct an electrical charge. Important in water treatment (as an indication of impurities) and
some hydrocarbons (static risk).

3.65 CONGEAL
To change from a liquid to a semi-solid or solid state.

3.66 CONTINUOUS CATALYST REGENERATOR


see Fluid bed operation.

3.67 CONTINUOUS DISTILLATION


An operation in which the steps of charging, heating, vapourisation, fractionation, and collection of products are
performed continuously rather than in a batchwise manner. The unit employed is known as a continuous still.

3.68 CONTROL LOOP


Combination of control signal, feedback signal and instrumental response that characterises an automatic control
system.

3.69 CONTROLLER
The actual control instrument is the controller. However, the word is often used in reference to the control valve that
acts on the process.

3.70 CONVECTION
The flow of heat through liquid or gas by actual mixing of the fluids (physical turbulence).

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 33
Printed Date: 9 July 2008
Operators Dictionary
3.71 CONVECTION SECTION
That portion of the furnace in which tubes receive heat by convection from the flue gases (contrast with radiant
section).

3.72 CONVENTIONAL PRODUCTS


Petroleum products which are manufactured from crude oil by physical separation processes. (See primary
processes).

3.73 CONVERSION PROCESSES


Manufacturing processes which involve a change in the structure of the hydrocarbons (See secondary processes).

3.74 COOLER
A heat exchanger whose primary purpose is to reduce the temperature of one of the passing fluids.

3.75 COOLING TOWER


A unit or structure, for the purpose of cooling by evaporation.

3.76 COPPER STRIP CORROSION


A qualitative method of determining the corrosivity of a product by its effect on a small strip of polished copper
suspended or placed in the product. One of the kerosene quality tests.

3.77 CORRECTED ENERGY & LOSS (CEL)


Yardstick used for monitoring refinery efficiencies.

3.78 CORROSION
The gradual eating away of metallic surfaces as the result of chemical action such as oxidation. It is caused by
corrosive agents such as acids.

3.79 COUNTERCURRENT FLOW


A system in which one fluid flows in one direction and another fluid flows in the opposite direction e.g. in a heat
exchanger, in which the direction of flow of the cold oil is opposite to that of the hot oil.

3.80 CRACKING
Process whereby the large molecules of the heavier oils are converted into smaller molecules of the gasoline type.
When this is brought about by heat alone, the process is known as thermal cracking. If a catalyst is also used the
process is referred to as catalytic cracking (in speech generally abbreviated to cat. cracking) or Hydrocracking if the
process is conducted over special catalysts in a hydrogen atmosphere - other processes include visbreaking and
hycon.

3.81 CREDITORS
Accounts payable.

3.82 CREEP
Change in the micro structure of a metal. The continuous stretching which occurs when metal is under stress or
pressure, especially apparent when at high temperatures.

3.83 CRITERIA REFERENCED INSTRUCTION


Method of instruction based on meeting specific criteria.

3.84 CRITICAL PRESSURE


The pressure necessary to condense a gas at the critical temperature.

3.85 CRITICAL TEMPERATURE


The maximum temperature at which a gas can be liquefied by pressure (critical pressure); above this temperature the
gas cannot be liquefied, no matter what pressure is applied.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 34
Printed Date: 9 July 2008
Operators Dictionary
3.86 CRITICAL VELOCITY
The rate of flow in a pipe at which streamline flow changes into turbulent flow.

3.87 CRUDE NAPHTHA


Light distillate made in the fractionation of crude oil.

3.88 CRUDE OIL TYPES


See appropriate sub-heading for description.
- Paraffin-base crude oils
- Asphaltic-base crude oils
- Mixed-base crude oils

3.89 CRUDE WAX


Crude wax, also called petroleum wax or slack wax, is an unrefined mixture of high-melting hydrocarbons, mainly of
the normal straight-chain type, still containing a fairly high percentage of oil. It is obtained by filtration (as such, or
after addition of a solvent) from high boiling distillates or residual oils. Slack wax is primarily obtained as
by-product in the manufacture of lubricating oils. The crude wax made from distillate oils is refined to make a range
of microcrystalline waxes.

3.90 CRYSTALISATION
A fractionation process based on the difference in freezing point of the various constituents of the mixture to be
fractionated. The process is, for example, used in the separation of paraffins from lube oil (de-waxing).

3.91 CUSTODY TRANSFER TANKS


Tanks which receive products from external sources or deliver products to external sources

3.92 CURRENT RATE


Current Assets
Current Liabilities

3.93 CUT
Refinery term for a fraction obtained direct from a fractionation unit. Several cuts can be blended for the
manufacture of a certain product.

3.94 CUT POINT


(Between two process streams). The boiling point at atmospheric pressure of the component distributed in equal
percentage in both process streams.

3.95 CYCLISATION
A reaction, for example, platinum-catalysed, by which a straight-chain paraffin hydrocarbon is converted into a
naphthene and then into an aromatic: i.e. The process of changing an open-chain hydrocarbon structure to a closed
ring, e.g. hexane to benzene. Accompanied by production of Hydrogen.

3.96 CYCLONE SEPARATOR


A conical vessel provided with a tangential inlet for a gas stream containing finely divided solids or liquid droplets,
normally designed with a centrally located overhead gas withdrawal line. Powdered solids or coagulated liquids are
separated by centrifugal force and pass downward along the incline (conical) to a centrally located outlet. In catalytic
cracking, a pipe, known as a dip leg, is connected to this bottom outlet and serves to convey the solids back to the
catalyst bed.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 35
Printed Date: 9 July 2008
Operators Dictionary
4 D

4.1 DAMPER
Usually a flap or shutter to control air flow in a furnace (may be in the supply and/or the flue ducting).

4.2 DEACTIVATION
Reduction in catalyst activity by poisoning or coating of catalyst particles by contaminants, or by a change in the
physical structure of the catalyst particles.

4.3 DEADWEIGHT
The amount of cargo, stores and fuel which a vessel carries when loaded to the appropriate draught allowed by law.
The difference between deadweight and displacement is the actual weight of the vessel.

4.4 DEARATOR
Device for the steam stripping of 02 and other gases from boiler feed water.

4.5 DEBTORS
Accounts receivable.

4.6 DECOMPOSITION
The breaking up of compounds into smaller chemical forms through the application of heat, change in other physical
conditions, or introduction of other chemical bodies.

4.7 DEFERRED TAXATION


Provision for tax payable in the future, but deferred in the current year because of timing differences between the
Company's accounts and the accounts required by the Inland Revenue Department.

4.8 DEHYDRATION
The removal of water from crude oil, from gas produced in association with oil, or from gas from gas-condensate
wells.

4.9 DEHYDROCYCLISATION
Any process involving both dehydrogenation and cyclisation reactions.

4.10 DEHYDROGENATION
A reaction process in which hydrogen atoms are eliminated from a molecule.

4.11 DEIONIZED WATER


Water that has had all the free ions removed by ion-exchange, also called demineralised water.

4.12 DEISOLATION
The opposite of isolation i.e. To energise a piece of equipment.

4.13 DEMISTER
Any device used to stop passage of liquid droplets e.g. a demister section in a vacuum column is to stop the
asphaltenes from the residue getting into the waxy distillate.

4.14 DEMULSIFIER
An additive used to prevent the formation of an emulsion - applicable in crude/water emulsions in desalter.

4.15 DEMURRAGE
Amount payable to ship owner for failure to load or discharge ship within time allowed.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 36
Printed Date: 9 July 2008
Operators Dictionary
4.16 DENITRIFICATION
Removal of nitrogen compounds on feedstock by hydrogenation. N2 + 3H2 = 2NH3.

4.17 DENSE BED LOADING


Catalyst loading system of "raining" the catalyst onto the bed which achieves a higher loaded density than "sock"
loading.

4.18 DEOXYGENATION
Removal of oxygen on feedstock by hydrogenation. 02 + 2H2 = 2H20.

4.19 DESALTING
A process to remove inorganic salts and other impurities from crude oil by mixing with water followed by settling in
an electrostatic field.

4.20 DESULPHURISATION - See Hydrodesulphurisation


The removal of sulphur or sulphur compounds from a charge stock.

4.21 DESUPERHEATER
Equipment used to reduce the temperature of superheated steam.

4.22 DETERGENCY
The ability of a substance to clean and to wash away undesirable substance. Detergents may be either oil-soluble or
water-soluble. Soap and synthetic detergents help to wet, disperse, and de-flocculate solid particles. Oil-soluble
detergents are used in motor oils to disperse, loosen, and remove carbon, dirt, etc. from interior surfaces of
internal-combustion engines.

4.23 DETERGENT OIL


A lubricating oil possessing special sludge-dispersing properties for use in internal-combustion engines. These
properties are usually conferred on the oil by the incorporation of special additives. Detergent oils hold sludge
particles in suspension and thus promote engine cleanliness.

4.24 DETONATION
Detonation or knocking is the sharp metallic sound emitting from the cylinders of spark-ignition engines under
certain conditions. It occurs when conditions in a cylinder are such that self-ignition of an unburnt mixture of fuel
and air takes place. It reduces power output.

4.25 DEW POINT (at a given pressure)


The temperature at which a vapour, contained in a closed vessel under the given pressure, will form a first drop of
liquid on the subtraction of heat. Further cooling of the vapour at its dew point results in condensation of part or all
of the vapour as liquid. The dew point of a normal gasoline is approximately the same as the temperature at which
70% by volume distils over in the ASTM-distillation test. The dew point of a pure compound is the same as its
boiling point.

4.26 DEWAXING
The process of removing paraffin wax from lubricating oils.

4.27 DIESEL ENGINE


As internal-combustion engine in which air drawn in by the suction stroke is so highly compressed that the heat
generated ignites the fuel, which is automatically sprayed into the cylinder under high pressure.

4.28 DIESEL FUEL


A general term covering oils used as fuel in diesel and other compression ignition engines.

4.29 DIESEL INDEX


A measure of the ignition quality of a diesel fuel; the index is calculated from a formula involving the gravity of the
fuel and its aniline point (API gravity times the aniline point (determining by ASTM D611-47T) divided by 100).

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 37
Printed Date: 9 July 2008
Operators Dictionary
4.30 DIFLUOROETHANE
A catalyst promoter used on the Hydrocracker.

4.31 DILUENT
A liquid used to dilute or thin out another liquid.

4.32 DIPPING
A process for measuring the height of a liquid in a storage tank. This is usually done by lowering a weighted
graduated steel tape through the tank roof and noting the level at which the oil surface cuts the tape when the weight
gently touches the tank bottom (see Ullage).

4.33 DISTILLATE
The liquid obtained by condensing the vapour given off by a boiling liquid. Also the top product taken off a
fractionating column; and in its broadest sense: any fraction other than the bottom product of the fractionator.

4.34 DISTILLATION (fractional)


A fractionation process based on the difference in boiling point of the various constituents of the mixture to be
fractionated. It is carried out by evaporation and condensation in contact with reflux. When applied to the separation
of gasoline, kerosene, etc., from a crude oil, to leave a residual fuel oil or asphaltic bitumen, the process is frequently
called topping. Distillation is normally carried out in such a way as to avoid decomposition (cracking); in the case of
the higher boiling distillates, such as long residue, this is accomplished by carrying out the distillation under vacuum
(which requires a lower temperature).

4.35 DISTILLATION CURVE


Curve made by plotting the percentage of gasoline (or other petroleum product) distilled versus the temperature.

4.36 DISTILLATION LOSS


The difference, in a laboratory distillation, between the volume of liquid originally introduced into the distilling flask
and the sum of the residue and the condensate recovered.

4.37 DISTRIBUTOR (LIQUID/GAS)


A device for distributing a 2 phase flow correctly within a vessel, i.e. encouraging separation.

4.38 DISULPHIDE
A compound containing a -S-S- linkage. Such compounds are colourless liquids completely miscible with
hydrocarbons and insoluble in water. The lower members, when pure, possess a nauseating sweet odour which is
particularly clinging and penetrating. Although disulphides are normal constituents of the lighter distillates, they are
also formed as a result of the oxidation of mercaptans. Sour distillates become sweetened in this way.

4.39 DIVIDEND COVER


Net profit after tax and before extraordinary items
Dividend for year

4.40 DIVIDEND YIELD


Market Price of Shares (cents)
Dividend Paid (cents)

4.41 DOCTOR SOLUTION


A solution (sodium plumbite) made from lead oxide and sodium hydroxide, used to treat gasoline or other light
petroleum distillates to remove mercaptan sulphur. The "doctor test" is used for the detection of sulphur compounds
in light petroleum distillates which react with sodium plumbite.

4.42 DOCTOR TREATMENT


A process of sweetening sour gasoline’s - by conversion of the mercaptans - by means of a solution of lead oxide in
caustic soda, together with sulphur. Not used at NZRC.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 38
Printed Date: 9 July 2008
Operators Dictionary
4.43 DOLPHIN
Separate pile in jetty system - used for mooring.

4.44 DOWNCOMER
A means of conveying liquid from one tray to the next below in a trayed column.

4.45 DOWNSTREAM
Towards the later end of the process e.g. final blending, product tankage. In the business sense - Marketing of
finished products, filling stations etc.

4.46 DRAW OFF


A connection which allows liquid to flow from the bottom of a vessel or to remove the contents from a draw off tray.

4.47 DRY GAS


Natural gas which does not contain liquid hydrocarbons at storage pressure. Also often used for a petroleum gas
consisting of no other compounds than inert gases (e.g. hydrogen, nitrogen, etc) and the light hydrocarbons methane,
ethane, ethene, propane, propene (sometimes also: hydrogen sulphide).

4.48 DUAL PURPOSE KEROSENE


An export grade Kero that meets both premium and Avtur specifications.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 39
Printed Date: 9 July 2008
Operators Dictionary
5 E

5.1 EARNINGS PER SHARE (CENTS)


Net profit after tax and before extraordinary items
Number of shares.

5.2 ECONOMISER
Equipment for preheating boiler feed water by use of low grade flue gas.

5.3 EJECTOR
A device that uses the venturi effect to pull a partial vacuum. Usually driven by steam and associated with
condensing plant.

5.4 ELASTOMER
A synthetic polymer with rubber-like characteristics. Examples of commercial products are styrene-butadiene
rubbers, butyl rubber, chloroprene rubber, nitrile rubber, polyurethane rubber and silicone rubber.

5.5 ELECTRICAL ISOLATION CERTIFICATE


Permit required to isolate or de-isolate any electrical equipment.

5.6 ELECTROLYSIS
Chemical decomposition by the action of an electric current.

5.7 EMULSIFIER
A substance used to promote or aid the emulsification of two liquids and to enhance the stability of the emulsion.

5.8 EMULSION
A dispersion of fine droplets of a liquid (the disperse phase) in the bulk of another liquid (the continuous phase) with
which it is immiscible. A third substance, the emusifier, is sometimes necessary to keep the droplets dispersed as a
stable emulsion.

5.9 END POINT


The point indicating the end of some operation or at which a certain definite change is observed. In titration, this
change is frequently a change in colour of an indicator which has been added to the solution, or the disappearance or
excess of one of the reactants which is coloured. In the distillation of liquids, such as gasoline, the end point is the
maximum temperature which occurs during the test (F.B.P).

5.10 ENDOTHERMIC
Relating to or designating a reaction which occurs with the absorption of heat, so that the temperature of the reacting
bodies is lowered (i.e. heating is required).

5.11 ENGINE OIL


A term applied to oils used for the bearing lubrication of all types of engines, machines, and shafting, and for
cylinder lubrication in other than steam engines.

5.12 ENGLER DISTILLATION


A standard test for determining the volatility characteristics of a gasoline by measuring the percent distilled at various
specified temperatures.

5.13 ENTRAINMENT
See CARRYOVER

5.14 EROSION
To gradually wear away e.g. Catalyst circulation causes erosion.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 40
Printed Date: 9 July 2008
Operators Dictionary
5.15 ETHANE C2H6
A colourless, odourless gas of the methane series. Along with methane one of the main constituents of natural gas.

5.16 ETHENE
The normalised name for ethylene. A hydrocarbon gas and first member of the olefin series.

5.17 EVACUATION
Act of pulling a vacuum on a vessel at atmospheric pressure - thus evacuating the air/gas present.

5.18 EVAPORATION
The conversion of a liquid into vapour, usually by means of heat.

5.19 EVAPORATOR
A vessel which receives the hot discharge from a heating coil, and by a reduction in pressure, flashes off overhead
the light products and allows the heavy residue to collect in the bottom.

5.20 EX SITU REGEN


Where catalyst is removed from a reactor and regenerated elsewhere (usually at a catalyst specialists own plant).

5.21 EXOTHERMIC
Relating to or designating a reaction which occurs with the evolution of heat, so that the temperature of the reacting
bodies is raised (i.e. cooling is required).

5.22 EXPANSION JOINT


A joint or coupling designed so as to permit an endwise movement of its parts to compensate for expansion or
contraction.

5.23 EXTRACT
The portion of an unrefined petroleum product (often a kerosene or a lubricating oil) resulting from a solvent
extraction process and consisting mainly of those components which are best soluble in the solvent. Generally the
extract, after removal of the solvent consists largely of aromatic hydrocarbons.

5.24 EXTRACTION
A fractionation process based upon the difference in solubility, in a given solvent, of the various constituents of the
mixture to be fractionated. The process is, for example, used in the separation of de-asphalted oil from short residue
(see butane de-asphalting).

5.25 EXTRACTION DEPTH


Depth to which DAO may be extracted from short residue on BDU unit - the greater the extraction depth, the higher
the DAO yield, although too deep an extraction may affect DAO specification.

5.26 EXTRACTOR
Column in which an extraction process (e.g. BDU) is carried out.

5.27 EXTRAORDINARY ITEMS


Items of expenses or income that are not related to the main activities/operations of the company.

5.28 EXTREME PRESSURE LUBRICANTS


A term applied to lubricating oils or greases which contain a substance or substances specifically introduced to
prevent metal-to-metal contact in the operation of highly loaded gears and bearings. In some cases this is
accomplished by the substances reacting with the metal to form a protective film.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 41
Printed Date: 9 July 2008
Operators Dictionary
6 F

6.1 FAECAL COLIFORM (F. COLI.)


Bacteria found in intestines of humans and animals. Indicative of sewage contamination.

6.2 FATIGUE
The tendency of a metal to become brittle and fracture under conditions of repeated cyclic stressing at stress levels
below its tensile strength.

6.3 FEED PREPARATION UNIT


High vacuum unit to split a long residue into a short residue and waxy distillate fraction with a low metal content; the
latter fraction is used as Hydrocracker feed.

6.4 FEEDSTOCK
Stock from which material is taken to be fed (charged) into a process unit.

6.5 FILTER
A porous material on which solid particles are largely caught and retained when a mixture of liquids and solids is
passed through it.

6.6 FILTRATE
The liquid which has passed through a filter; the product from a filtration process.

6.7 FIN FAN


See air heat exchanger.

6.8 FIRE WALL


An earth bank or cement wall built around an oil storage tank compound to prevent the spread of the oil in case of
fire or bursting of the tank. Height normally calculated to contain contents of largest tank within compound.

6.9 FIXED-BED OPERATION


A type of operation in which the catalyst remains stationary in the reactor. The catalyst may be regenerated insitu or
exsitu periodically. To be contrasted with fluid-bed operation.

6.10 FLAME ARRESTOR


An assembly of perforated plates or screens enclosed in a case and attached to the breather vent on petroleum storage
tanks, and on bitumen or sour water gas lines prior to burning the gas in a furnace.

6.11 FLAMMABLE
Capable of being easily set on fire; combustible.

6.12 FLASH
1. A sudden release in pressure resulting in partial or complete vapourisation.
2. A sudden burst of light; a momentary blaze.
3.

6.13 FLASH DISTILLATION


The process of heating a liquid to a temperature within the boiling range of the liquid which causes the evaporation
of part of the liquid. The vapour may then be taken off and condensed.

6.14 FLASH POINT


The lowest temperature under closely specified conditions at which a combustible material will
give off sufficient vapour to form an inflammable mixture with air in a standardised vessel.
Flash point tests are used to assess the volatilities of petroleum products.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 42
Printed Date: 9 July 2008
Operators Dictionary
6.15 FLEXIBLE VOLATILITY INDEX
A measure of the volatility of gasoline’s calculated by the formula
RVP +( 0.7 x E70 ) E70 = Evaporation at 70 0C

6.16 FLOATING HEAD


An end of a heat exchanger into which tubes are fitted, constructed to allow for the expansion and contraction of the
exchanger tubes.

6.17 FLOATING ROOF


A special tank roof which floats upon the oil. Applied to do away with the vapour space in storage tanks and thus
reduce losses by breathing and hazards of explosions.

6.18 FLOC
Any small, tufted, or flake-like mass of matter floating in a solution, e.g. as produced by precipitation. Used in water
treatment for removal of impurities.

6.19 FLOCCULATION
Process of forming and removing floc and associated impurities.

6.20 FLOODING
In a fractionating column, the filling up with a liquid.

6.21 FLUE GAS


Gas from the combustion of fuel, the heating effect of which has been substantially spent and which is, therefore,
discarded to the flue or stack. Its constituents are principally CO2, CO, 02, N2 and H20.

6.22 FLUID
Non rigid substance consisting of particles that move freely amongst themselves (includes particulate, liquids and
gases).

6.23 FLUID BED OPERATION


Where catalyst is continually moved from the reactor to a regenerator and back again, as in the continuously
regenerated platformer or cat cracker processes.

6.24 FOAM
A preparation designed to smother oil fires. It consists of a solution which, on mixing with water, produces a mass
of foam many times the volume of the original liquids.

6.25 FOAMING
1. The formation of froth or foam on lubricating oils or other oils as a result of aeration or release of gas
dissolved in the oil.

2. The formation of bubbles on the surface of boiled water. The foam may entirely fill the steam space of the
boiler or may be of minor depth; in either case, it causes appreciable entrainment of boiler water with steam.

3. Caused in Adip systems by presence of liquid hydrocarbons or fines affecting surface tension of solution.

6.26 FORCED DRAUGHT


Air forced into a furnace by means of a fan or blower to improve combustion (compare induced draught).

6.27 FRACTION
A portion of petroleum separated from other portions in the fractionation of petroleum products. It is often
characterised by a particular boiling range.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 43
Printed Date: 9 July 2008
Operators Dictionary
6.28 FRACTIONAL CONDENSATION
A separation of the components of vapourised oil coming off during distillation by condensing the vapours in stages
(partial condensation). The oil of highest boiling point will condense first and may be removed in the liquid stage,
allowing the portion still in the vapour state to pass on to the next stage condenser.

6.29 FRACTIONATING COLUMN


An apparatus in which fractionation is carried out. It consists of a vertical cylindrical metal vessel, containing
equipment for the proper contacting of flashed liquid and vapour. heat is often supplied at the bottom of the column
in a reboiler, whereas heat is withdrawn at the top in a condenser. Heat can also be supplied or withdrawn at
intermediate heights of the column, if beneficial to the process (inter-heaters or inter-coolers). The oil to be
fractionated is fed into the column at one or more predetermined locations throughout the height of the column. The
contacting equipment is formed by fractionating trays in the oil and chemical industry in general, although for some
applications various packing materials are used.

6.30 FRACTIONATING TRAYS


Equipment aimed at promoting contact between vapour and liquid for fractionation. The flow can be of a single type
(i.e. vapour and liquid are arranged to use separate aperatures) or of the dual type (i.e. vapour and liquid may use the
same aperature). The former type is promoted by the provision of downcomers for the liquid. Various arrangements
of downcomers lead to various systems of trays. Analogously there may be different provisions for the vapour
passage, again leading to various possibilities of trays. For further information see bubble cap trays, calming section
trays, grid trays, sieve trays and valve trays.

6.31 FRACTIONATION
The general name for a physical process of separating a mixture into its constituents, or into groups of these
constituents, called fractions. Examples are: absorption, azeotropic distillation, crystallisation, decanting,
distillation, extraction, extractive distillation and flotation.

6.32 FREE ON BOARD (FOB)


The unit price at the loading port.

6.33 FREE WATER


Water which is not dissolved (ie not chemically bound in solution) in a fuel or feedstock.

6.34 FREEZE POINT


An important characteristic of aviation fuels. The test for Jet A1 is to cool until solid then reheat, the temperature at
which the solid MELTS is called freeze point.

6.35 FREEZING POINT


The temperature at which crystals first appear when a liquid is cooled under specified conditions.

6.36 FRESH GAS


In the HYDROCRACKER, Fresh H2 from the reformer to replace H2 used up in the process. Otherwise any
imported gas as distinct from recycle gas.

6.37 FRICTION
Resistance to the motion of one surface against another.

6.38 FUEL AIR RATIO


The ratio of the weights of fuel to air supplied to an engine, furnace or boiler at any time.

6.39 FUEL CELL


An electrochemical device to convert chemical energy directly into electricity. It is similar in some respects to a
storage battery or a dry cell. Like a battery, the fuel cell produces electricity by a chemical reaction. Unlike a
storage battery, however, the fuel cell continues to produce electricity as long as fuel is added. In a fuel cell chemical
energy is directly converted to electrical energy by a process that is the reverse of electrolysis. A fuel gas is fed into
one or two hollow porous electrodes in a liquid electrolyte whilst oxygen or air is supplied to the other electrode.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 44
Printed Date: 9 July 2008
Operators Dictionary
6.40 FUEL GAS
Any gas used for heating by combustion.

6.41 FUEL OIL


Any liquid or liquefiable petroleum product burned for the generation of heat in a furnace or firebox, or for the
generation of power in an engine, exclusive of oils with a flash point below 100oF.

6.42 FUNCTIONAL LOGIC SCHEME


Diagrams used to show the interaction of plant trips, both cause and effect.

6.43 FUNCTIONAL LOGIC SYSTEM


System of plant protection whereby loss of a signal indicates a failure or trip of part of the unit. This trip will then
shutdown all or part of the unit.

6.44 FURNACE
That section of the refinery process in which the combustion of fuel and air takes place.

6.45 FURNACE PASS


For more even heat transfer, the product to be heated is usually split into 4 or more individual pipes (passes) and then
recombined at the furnace exit.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 45
Printed Date: 9 July 2008
Operators Dictionary
7 G

7.1 GAP
1. In adjacent fractions, the temperature difference between the initial boiling point of the higher boiling fraction
and the end point of the lower boiling fraction. Specifically, the term 'gap' is only used when this difference
is positive (c.f. overlap).

2. The mid-position where a pair of gap-acting split range controllers are both closed.

7.2 GAS HOLDER


A tank for the storage of gas. It usually floats on a liquid seal, buoyed up by the pressure of the stored gas.

7.3 GAS OIL


Another common name for diesel fuel (A.G.O.)

7.4 GAS/OIL RATIO


The volume of gas at atmospheric pressure produced per unit volume of oil produced (from oil wells).

7.5 GASOLINE
Light petroleum fraction, with a boiling range between the approximate limits of 30 and 200oC.

7.6 GAS TURBINE


An engine in which gas (as distinct from steam) is directed, under pressure, against a series of
turbine blades. The energy contained in the rapidly expanding gas is converted into rotary
motion.

7.7 GATHERING STATION


Oilfield installation which receives the production from several wells in its vicinity. It provides facilities to separate
the gas and the water, to gauge the production of oil, gas and water, and to transport the oil to the main storage tanks.

7.8 GEAR OIL


A lubricating oil for use in standard transmissions, most types of differential gears, and gears contained in gear cases.

7.9 GLAND
The outer portion of a stuffing box, consisting of a tubular projection which embraces the rod and extends into the
bore of the box, thus bearing against the packing.

7.10 GOVERNOR
A device used to control the speed of a turbine, the best known example being the Woodward Governor.

7.11 GRAVITOMETER
Instrument used for measuring changes in the specific gravity of oil flowing in a pipeline.

7.12 GRID TRAYS


Fractionating trays consisting of parallel bars of flat or round section. The flow is essentially of the dual type, but
this character may be reduced by the provision of downcomers (see Fractionating trays).

7.13 GUM
Oxidation of gasoline's may produce a sticky substance known as "gum". When unstable gasoline’s are stored for
long periods, the gum content may increase. Gum forming is retarded or prevented by using certain inhibitors, e.g.
Topanol.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 46
Printed Date: 9 July 2008
Operators Dictionary
8 H
8.1 HAMER LINE BLIND
A spectacle blind-type blanking device which has only 3 retaining bolts, these are a type of wing not.

8.2 HEADER
A common manifold in which a number of pipelines are united. Also used in reference to the U-bend connection
between two consecutive tubes in a coil.

8.3 HEAT CAPACITY


Amount of heat per kg per oC change in temperature.

8.4 HEAT EXCHANGER


An apparatus for transferring heat from one fluid to another. Specifically, a piece of equipment having a tubular
piping arrangements which affects the transfer of heat from a hot to a relatively cool material by conduction through
the tube walls.

8.5 HEAT OF COMBUSTION


The heat created when a substance is burned in oxygen. The calorific, thermal, or heating value of a fuel is the total
amount of heat developed by the complete combustion of a unit quantity of fuel; it is reported as calories per gram or
Btu per pound.

8.6 HEATER
The furnace-and-tube arrangement which normally furnishes the principal heating element in a processing unit.

8.7 HI-FI TRAYS


Similar to calming section trays, except there is a greater downcomer area.

8.8 HIGH VACUUM UNIT


A unit for the production of vacuum gas oil and waxy distillate from long residue, by means of distillation at very
low pressures, i.e. high vacuum.

8.9 HORSEPOWER
A unit of rate of operation; one mechanical horsepower equals 33,000 ft-lb per minute, or 550 ft-lb per second. This
is just one form of Horse Power there are more.

8.10 HORTON SPHERE


A spherical tank used to store volatile liquids under high pressure, e.g. butane.

8.11 HOT OIL


Any oil used for the transfer of heat, as in the 700 Unit.

8.12 HOT SPOT


1. A finite area in the combustion zone of an engine which remains at a temperature higher than that of the
immediate surrounding, thus aggravating detonation or pre ignition.

2. An area on the wall of a vessel or line which is appreciably above normal operating temperature. Often as a
result of the deterioration of an internal insulating liner which exposes the line or vessel shell to the
temperature of its contents.

8.13 HUMIDITY
A measure of the moisture contained in the atmosphere.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 47
Printed Date: 9 July 2008
Operators Dictionary
8.14 HYDRATE
A compound formed by the chemical union of water with a molecule of some other substance such as gypsum, from
which water may be separated by a simple readjustment of the molecular structure. Gas hydrates, formed from water
and, for example methane, may cause plugging of the tubing and flow lines of gas wells.

8.15 HYDRATION
The addition of water to a double bond, no breakdown of the molecular structure being involved.

8.16 HYDRAULIC FLUIDS


Fluids used in the hydraulic systems of aircraft and industrial equipment etc.

8.17 HYDROCARBON
A compound containing only hydrogen and carbon. The simplest hydrocarbons are gases at ordinary temperatures;
but with increasing molecular weight, they change to the liquid form and, finally, to the solid state. They form the
principal constituents of petroleum.

8.18 HYDROCHLORIC ACID


A strong mineral acid, HCL. It is also called muriatic acid.

8.19 HYDROCRACKING
A process in which hydrocarbons are converted under hydrogen pressure into products of lower molecular weight, in
the presence of an acidic catalyst.

8.20 HYDRODEALKYLATION
A process to remove side-chains on aromatic molecules, either thermally or catalytically, under hydrogen pressure.

8.21 HYDRODESULPHURIZATION
The elimination of sulphur containing molecules in crude’s or distillates by the action of hydrogen under pressure
over a catalyst.

8.22 HYDROGEN
The lightest of all gases, occurring chiefly in combination with oxygen in water, also in acids, bases, alcohol’s,
petroleum and other hydrocarbons.

8.23 HYDROGEN BLISTERING


A form of corrosion. Blistering of steel is caused by trapped molecular hydrogen formed as atomic hydrogen during
attack of steel by hydrogen sulphide.

8.24 HYDROGEN SULPHIDE


A compound of hydrogen and sulphur, specifically the monosulphide; a colourless, flammable, poisonous gas, H2S,
having a disagreeable odour; also called sulphureted hydrogen.

8.25 HYDROGENATION
The filling of the "free" places in unsaturated structures by hydrogen atoms. The chemical addition of hydrogen to a
material. In non-destructive hydrogenation, hydrogen is added to a molecule only if, and where, unsaturation with
respect to hydrogen exists. In destructive hydrogenation, the operation is carried out under conditions which result in
rupture of some of the hydrocarbon chains (cracking); hydrogen is added where the chain breaks have occurred.
This process is known as hydrocracking.

8.26 HYDROLYSIS
The decomposition of a molecular structure by the action of water. A chemical decomposition in which a compound
is broken up and resolved into other compounds by reaction with water. In many cases, it is induced by the presence
of a small amount of dilute acid.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 48
Printed Date: 9 July 2008
Operators Dictionary
8.27 HYDROMETER
A graduated instrument for determining the gravity of liquids, usually made of hollow glass and weighted at one end
so as to float upright. On immersion, the lighter the liquid, the lower the instrument sinks because the buoyancy
force is less. Some hydrometers are marked to read percentage of constituent, or some other property related to
gravity. The instruments used in measuring petroleum products usually read degress API or specific gravity directly.

8.28 HYDROSTATIC HEAD


The pressure exerted by a column of fluid, equalling the height of the column times the fluid density times the
acceleration of gravity. An expression of the pressure existing at a certain point, in terms of weight of a
superimposed column of fluid.

8.29 HYDROSTATIC TEST


A pressure test using water to check the reliability of equipment prior to being bought into service.

8.30 HYDROTREATING
A vapour phase process used to treat petroleum fractions boiling up to approximately 250 C. The process involves
passage over a fixed bed of catalyst (usually prepared by depositing the metals COBALT and MOLYBDENUM on
an alumina base) in a hydrogen atmosphere. The process achieves:

1. Hydrogenation of the sulphurous contaminants in the feedstock to hydrogen sulphide.

2. Saturation of unsaturated component compounds such as olefins.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 49
Printed Date: 9 July 2008
Operators Dictionary
9 I

9.1 IGNITION POINT


The point or temperature at which a substance takes fire.

9.2 IGNITION QUALITY


A measure of the ignition delay of a fuel in a diesel engine.

9.3 IMMISCIBLE
Not capable of mixing; tending to form two layers, e.g. oil and water.

9.4 INCOMPATIBLE
Applied to a substance which, for chemical, physical, or physiological reasons, cannot be mixed with another without
changing its nature or affect.

9.5 INDIGENOUS FEEDSTOCK


Local (i.e. NZ) crude’s or condensates e.g. Maui, Kapuni etc.

9.6 INDUCED DRAUGHT


Air drawn into a furnace by means of a fan to improve combustion (compare forced draught).

9.7 INERT ENTRY


Specialised entry into a vessel under N2 atmosphere, by use of B.A. and special safety precautions. Used e.g. in
hydrocracker catalyst change operation.

9.8 INERT GAS


Nitrogen on the refinery, scrubbed flue gas on the tankers. Used for air (oxygen) exclusion to reduce fire/explosion
risk.

9.9 INERT FILLER


Non reactive packing/support material, e.g. ceramics, stainless steel etc.

9.10 INFLAMMABLE
Very flammable - not to be confused with non-flammable.

9.11 INHIBITOR
A substance, the presence of which in small amounts in a product prevents or retards undesirable changes in the
quality of the product, or in the condition of the equipment in which the product is used. In general, the essential
function of inhibitors is to prevent or retard oxidation. Examples of uses include the delaying of gum formation in
stored gasoline’s and of colour change in lubricating oils; also the prevention of corrosion, e.g. rust prevention by
inhibitors in turbine oils and fuels.

9.12 INITIAL BOILING POINT


According to ASTM Method D 86 the recorded temperature when the first drop of liquid falls from the end of the
condenser.

9.13 INJECTOR
A mechanism which may be used in different forms for spraying fuel oil into the combustion chamber, or for feeding
water into steam boilers.

9.14 IN-LINE BLENDING


A system in which all components are pumped simultaneously into a common discharge pipe (header) at rates of
flow corresponding to the required proportions, the rates of flow being controlled. Blending takes place in the lines
between the header and the storage tank into which the blend is discharged.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 50
Printed Date: 9 July 2008
Operators Dictionary
9.15 INORGANIC
Pertaining to substances not organic, nonliving, i.e. which are not carbon compounds, with the possible exception of
the oxides and sulphides of carbon.

9.16 INSITU REGEN


Catalyst regeneration carried out within the reactor. Carbon is burned off under controlled conditions of heat/air.
Less effective, but cheaper and usually quicker than ex-situ.

9.17 INSTITUTE OF PETROLEUM


The organisation in Great Britain primarily responsible for the advancement of the study of petroleum and its allied
products in all their aspects. It is the recognised British standardisation authority for methods of testing petroleum
products.

9.18 INTERCEPTOR
Equipment to remove oil from water either for process separation or pollution control. Weir, parallel and tilted plate
types are used.

9.19 INTERNAL-COMBUSTION ENGINE


An engine which operates by means of combustion of a fuel within its cylinder.

9.20 ION EXCHANGE RESINS


Preparation used in water softening - Anion and Cation resins are used.

9.21 ISOLATE
Any means of positive separation from a risk source:-

1. To electrically disconnect.

2. To valve/spade isolate a piece of linework/equipment.

9.22 ISOMER
Two substances composed of equal amounts of the same elements but differing in properties owing to variation in
structure are called isomers.

9.23 ISOMERISATION
The conversion of a compound into its isomer. For example, butane may be converted into isobutane. A reaction
which alters the fundamental arrangement of the atoms in the molecule without adding or removing anything from
the original compound. In the petroleum industry, straight-chain hydrocarbons are converted catalytically to
branched-chain hydrocarbons of substantially higher octane number by isomerisation.

9.24 ISO-OCTANE C8H18 (2,2,4-TRIMETHYLPENTANE)


A colourless liquid used with n-heptane to prepare standard mixtures to determine anti-knock properties of gasoline.

9.25 ISOTOPE
Any one of a number of atomic species differing in atomic weight but having the same atomic number.
Used in some Refinery instruments and for radiography.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 51
Printed Date: 9 July 2008
Operators Dictionary
10 J

10.1 JET A1
See Avtur.

10.2 JET ENGINE (see also Gas Turbine)


An engine which converts fuel and air into a fast-moving stream of hot gases which effect propulsion of the device of
which the engine is a part.

10.3 JET FUEL


Fuel meeting the required properties for use in jet engines and aircraft turbine engines. It is subject to intense testing
and quality control as laid down in DERD and AFQRJOS documents internationally.

10.4 JETTY HOSE


Large bore counterbalanced heavy rubber hose used for loading/unloading ships.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 52
Printed Date: 9 July 2008
Operators Dictionary
11 K

11.1 KELVIN
The unit used as the Absolute temperature scale, i.e. zero Kelvin is absolute zero, 273K is 0oC. The Kelvin degree
has the same dimensions as the Celsius degree. The o symbol is not used on the Kelvin scale.

11.2 KEROSENE
Any petroleum product with a boiling range between the approximate limits of 140 oC and 270oC which satisfies
certain quality requirements (for lamp oil or jet fuel).

11.3 KETTLE REBOILER


A reboiler with facilities for separation of liquid and vapour.

11.4 KNOCK
Related to internal combustion engines the noise associated with detonation of a portion of the fuel-air mixture in a
cylinder ahead of the advancing flame front.

11.5 KNOCKOUT (DRUM OR VESSEL)


A vessel, constructed with baffles, through which a mixture of gas and liquid is passed to disengage one from the
other. As the mixture comes in contact with the baffles, the impact frees the gases and allows them to pass overhead;
the heavier substance falls to the bottom of the drum.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 53
Printed Date: 9 July 2008
Operators Dictionary
12 L

12.1 LAGGING
A covering to retain heat, such as mineral wool wrapped on steam pipes.

12.2 LASER ALIGNMENT


Method of aligning rotating equipment shafts using a laser beam.

12.3 LATENT HEAT


Heat required for a change of state without a change of temperature.

1. The latent heat of fusion, or the amount of heat necessary to change a unit mass of solid into a liquid without
change of temperature.

2. The latent heat of vapourisation, or the amount of heat necessary to change a unit mass of liquid into vapour
without change of temperature.

4. The latent heat of condensation. Effectively the opposite of 2 (above).

12.4 LEAD
Industry parlance for the motor fuel anti-knock additive compounds tetraethyl-lead, tetramethyl-lead, or for other
organometallic lead anti-knock compounds. Not used in NZ.

12.5 LEAD ACETATE TEST


A method of detecting the presence of hydrogen sulphide in a sample using lead acetate paper, which will change
from white to brown upon detection.

12.6 LEAD SUSCEPTIBILITY


Ability of gasoline’s to respond to the addition of tetramethyl-lead, or other organometallic lead anti-knock
compounds, as reflected in the increase of anti-knock quality (octane number) with increase in lead content.

12.7 LEADED GASOLINE


Refers to gasoline containing tetramethyl-lead or other organometallic lead anti-knock compounds. Not used in NZ.

12.8 LEAN ADIP


Adip that has been regenerated and had H2S removed.

12.9 LICHEN
Simple plant that is sensitive to SO2 and can thus be used as an indication of SO2 (i.e. stack emission) pollution.

12.10 LIGHT DISTILLATE


A term applied to distillates the final boiling point of which does not exceed 300oC.

12.11 LIGHT ENDS


The lower-boiling components of a mixture of hydrocarbons.

12.12 LIGHT TOPS


The lower-boiling components of Naphtha.

12.13 LINEAR PROGRAMME (LP)


A mathematical representation of an operation which can be optimised according to a set of economic criteria.

12.14 LIQUEFIED NATURAL GAS (LNG)


Natural Gas can be liquefied, e.g. at atmospheric pressure by cooling to about - 160 C (-256oF).

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 54
Printed Date: 9 July 2008
Operators Dictionary
12.15 LIQUEFIED PETROLEUM GAS (LPG)
of the gaseous hydrocarbons, propane and the butanes can be liquefied under relatively low pressure and at ambient
temperature and are then known as liquefied petroleum gas. Light hydrocarbon material, gaseous at atmospheric
temperature and pressure, held in the liquid state by pressure to facilitate storage, transport and handling.
Commercial liquefied gas consists essentially of propane, butane, or mixtures thereof.

12.16 LIQUID PHASE


The term describing a product or substance when in the form of a liquid.

12.17 LIQUID SEAL


A quantity of liquid used to prevent the emission of a gas through an orifice. To be completely effective the
hydrostatic head exerted by the liquid must be greater than the pressure of the gas and the gas must be insoluble in
the liquid.

12.18 LITRE
The primary standard of capacity in the metric system, equal to the volume of one kilogram of pure water at
maximum density, at approximately 4 C, and under normal atmospheric pressure.

12.19 LIVE STEAM


As contrasted to exhaust steam, steam coming directly from a boiler before being utilised for power or heat.

12.20 LOAD-ON-TOP SYSTEM


System of cleaning the tanks of a crude oil tanker by collecting washings from each tank in one tank, allowing the
water to separate from the oil, then discharging the water overboard, leaving the oil residues in the tank. The next
crude oil cargo is loaded on top of the residues.

12.21 LOADING RACK


A structure built alongside railroad tracks or at road depots for the purpose of loading tank cars or road tankers with
products.

12.22 LOGIC
See functional logic.

12.23 LONG RESIDUE


The residue resulting from the atmospheric distillation of crude oil.

12.24 LOST TIME ACCIDENT (LTI)


Any work injury that results in the worker being unable to recommence work on the day after the injury.

12.25 LOW VISCOSITY INDEX


See Viscosity index.

12.26 LOWER EXPLOSIVE LIMIT


Leanest mixture that will explode. A greater air: hydrocarbon ratio will not ignite.

12.27 LUBOIL
Lubricating oil

12.28 LUBRICANT
A substance, especially oil, grease, or a solid such as graphite, which may be interposed between moving parts of
machinery, thus reducing friction by preventing contact between the bearing surfaces. The lubricant has an
important function in removing heat and dirt from the region of the bearing surfaces.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 55
Printed Date: 9 July 2008
Operators Dictionary
12.29 LUBRICATING OIL
A fluid lubricant used to reduce friction between bearing surfaces. Petroleum lubricating oils may be produced either
from distillates or residues; amounts of other substances, known as additives, may be added to impart or improve
certain required properties.

12.30 LUBRICATION
The state of being lubricated, or the act of applying lubricating substances which are capable of reducing friction
between and removing heat from moving mechanical parts.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 56
Printed Date: 9 July 2008
Operators Dictionary
13 M

13.1 M CAP DECK


A de-entrainment draw off tray used on HVUII.

13.2 MANIFOLD
A piping arrangement which allows one stream of liquid or gas to be divided into two or more streams, or which
allows several streams to be collected into one.

13.3 MANOMETER
An instrument for measuring the expansion or the expansive power of gases or vapours; a pressure gauge or vacuum
gauge.

13.4 MASS SPECTROMETER


A device for analysing a substance in terms of the mass-to-charge ratios of its constituents. It is so designed that the
beam constituents of a given-mass-to-charge ratio are focused on an electrode and detected or measured electrically.
The mass spectrum shows the distribution in mass or the mass-to-charge ratio of ionised atoms, molecules, or
molecular fragments.

13.5 MELTING POINT


Temperature at which a solid substance melts or fuses. For asphalt, the melting point is defined as the temperature at
which the asphalt is soft enough to permit a steel ball to drop through a disk of asphalt supported in a ring suspended
in water (ring-and-ball method). The grease melting point is determined by placing a small amount of the grease on
the bulb of a thermometer and heating in hot air until the grease begins to run off.

13.6 MERCAPTANS
Mercaptans or alkyl-hydrosulphides are organic compounds of carbon, hydrogen and sulphur. They have a bad
odour and frequently occur in unrefined gasoline. Mercaptans must be removed from gasoline or converted to the
unobjectionable disulphides by suitable refining (e.g. by sweetening).

13.7 METHANATOR
Part of the reformer process that converts unwanted carbon oxides to methane which is more acceptable to the
hydrocracker.

13.8 METHANE CH4


A light, odourless inflammable gas. It is the chief constituent of natural gas. It is also often produced by a partial
decay of plants in swamps (marsh gas), so that its occurrence is commonly misinterpreted by the layman as an
indication of the presence of petroleum.

13.9 METHANE SERIES


A homologous series of open-chain saturated hydrocarbons of the general formula CnH2n+2 of which methane
(CH4) is the first member of the type; generally called the paraffins.

13.10 METHANOL
Methylalcohol, CH3OH. The first member of the class of organic compounds known as alcohols. It is a liquid
boiling at 66 C. Methanol is inflammable and poisonous. It is used in the production of synthetic gasoline - see
synfuel.

13.11 METHYL CHLOROFORM


Used as a catalyst promotor in the platformer.

13.12 METHYL TERTIARY BUTYL ETHER (MTBE)


An oxygenated compound which can be used as a blending compound in gasoline to boost octane.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 57
Printed Date: 9 July 2008
Operators Dictionary
13.13 METRIC SYSTEM
A system of weights and measures derived from the metre. The system includes: measures of length, wherein the
metre is the unit, measures of surface, wherein the square metre is the unit, measures of capacity, wherein the litre is
the unit, and weights, wherein the gram is the unit.

13.14 MICROCRYSTALLINE WAXES


Waxes having a very fine crystal structure, and consisting mainly of iso- and cycloparaffins with some aromatics.
They are produced mainly from heavy lubricating oil residues and have melting points from 60-90 C.

13.15 MIDDLE DISTILLATE


One of the distillates obtained between kerosine and lubricating oil fractions in the refining processes. These include
light fuel oils and diesel fuel.

13.16 MINERAL OIL


Generally speaking, this term refers to a wide range of products derived from mineral substances.

13.17 MINIMUM STOP


A setting used to restrict the closure of a control valve. There are two ways of achieving this:-

1. Mechanical, by use of a collar or nut on the spindle, diaphragm.

2. Pneumatically, by restricting the minimum air signal from the control instrument.

13.18 MISCIBLE
Capable of being mixed (stability and uniformity throughout the mixture are usually inferred).

13.19 MIXED BASE CRUDE


A crude oil which is a mixture of paraffin - and naphthene-base crude.

13.20 MIXER
Device used for mixing partially im-miscible liquids in process plant or to prevent layering in tanks - a propeller or
jet mixture may be used.

13.21 MIXING VALVE


A valve which creates turbulence within a pipe to effect mixing of the materials flowing through the pipe.

13.22 MIXTURE
The intermingling of two or more substances, each retaining its original properties.

13.23 MOLE PERCENT


An expression of the percent composition of a mixture in terms of moles. The relative numbers of moles are
computed by dividing the numbers of units of weight of the individual constituents by their respective molecular
weights.

13.24 MOLECULAR WEIGHT


The sum of the atomic weights of the atoms composing a molecule.

13.25 MOLECULE
The smallest portion of an element or a compound which retains chemical identify with the same particular substance
en masse, e.g. unit of water.

13.26 MOTOR GASOLINE


A complex mixture of relatively volatile hydrocarbons, with or without small quantities of additives, which have
been blended to form a fuel suitable for use in automotive internal-combustion engines.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 58
Printed Date: 9 July 2008
Operators Dictionary
13.27 MOTOR OCTANE NUMBER (MON)
The Octane number of a Motor Gasoline determined in a special laboratory test engine under high "engine-severity"
conditions, giving a rough measure of the high-speed knock properties of the gasoline.

13.28 MOTORISED VALVE


A valve incorporated in automatic control systems to regulate the rate of flow of material through a section of pipe.
It is actuated either hydraulically, electrically, from a control instrument.

13.29 MULTIGRADE OIL


One of the multi-viscosity number oils in which one oil combines three SAE viscosity number grades. For example,
multigrade SAE 10W-30 grade may be used where SAE 10W, SAE 20-20W, or SAE 30 grades specified.
Multi-grade oils are usually made to meet the requirements of API Services MS, DG, and DM. They have been
made possible by improved refining processes and the use of improved additives.

13.30 MULTISTAGE PUMP


Pump with more than one impeller. Generally used in high pressure/medium flow applications.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 59
Printed Date: 9 July 2008
Operators Dictionary
14 N

14.1 NAPHTHA
Naphtha’s are straight-run gasoline fractions boiling below kerosene. Being generally unsuitable as a blending
component for premium gasoline’s, they are used as a feedstock for Platforming. Other important outlets for
naphtha’s are their use as chemical feedstock (e.g. ethylene manufacture) and as feedstock for town gas manufacture.

14.2 NAPHTHENE
A class of saturated cyclic hydrocarbons of the general formula CnH2N. One of a group of cyclic hydrocarbons, also
termed cycloparaffins or cycloalkanes. Polycyclic members are found in the higher boiling fractions of crude oil.

14.3 NAPHTHENIC ACID


Naturally occurring acidic compounds commonly found in Naphthenic crude’s.

14.4 NAPHTHENIC CRUDE


Crude oil containing a relatively large percentage of naphthene. An oil obtained from a Naphthenic crude is said to
be a naphthene base oil. Lubricating oils made from such crude’s are normally distinguished from similar oils made
from paraffinic crude’s (both oils equally well refined) by lower gravity, lower carbon content and pour point, and
lower rating viscosity index.

14.5 NATURAL DRAUGHT


A flow of air into the combustion chamber of a heater which is neither induced nor forced but derives solely from the
fact that the pressure inside the heater is lower than that of the ambient atmosphere (due to effect of stack).

14.6 NATURAL GAS


Naturally occurring mixtures of hydrocarbon gases and vapours, the more important of which are methane, ethane,
propane, butane, pentane, and hexane. The gas which occurs naturally with crude oils, but also in reservoirs which
contain only a few heavier constituents. It consists mainly of the lighter paraffin hydrocarbons. Natural gas is
usually classified as wet or dry, depending on whether the proportions of gasoline constituents which it contains are
large or small. Most gas reaches the surface through the tubing, but in some pumping wells it is taken off at the top
of the casing (casinghead gas).

14.7 NATURAL GASOLINE


Gasoline extracted from wet natural gas, consisting of butane, pentane and heavier hydrocarbons. After stabilisation
- the removal of the lighter components - the gasoline is suitable for blending into motor gasoline.

14.8 NET ASSET BACKING/SHARE


Shareholders' Investment
Number of shares

14.9 NET PROFIT AFTER TAX


Income from all sources less operating costs, depreciation and tax.

14.10 NET PROFIT BEFORE TAX


Income from all sources less operating costs and depreciation.

14.11 NEUTRAL
Neither acid nor alkaline.

14.12 NEUTRON
An uncharged particle having the mass of the proton. Generally, together with the protons, neutrons make up the
nucleus of atoms.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 60
Printed Date: 9 July 2008
Operators Dictionary
14.13 NITROGEN
Element of atomic number 7, in group V of the periodic system; colourless, odourless, tasteless diatomic gas
constituting approximately four-fifths of the air; chemically rather inert; soluble in water. Derived from liquid air by
fractional distillation. Used extensively in refineries for inerting process plants (air exclusion).

14.14 NITROGEN BASE


A compound, such as amine, which may be considered a substitution product of ammonia; a compound containing
trivalent nitrogen, capable, like ammonia, of combining with acids in the formation of salts containing pentavalent
nitrogen.

14.15 NON-ASSOCIATED NATURAL GAS


Gas accumulations which exist independently of any oil accumulation.

14.16 NON CUSTODY TRANSFER TANKS


Tanks which receive products from internal sources or deliver products to internal sources.

14.17 NORMALISE
Correction made to a calculated figure (e.g. WABT) to allow for the effect of other variables.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 61
Printed Date: 9 July 2008
Operators Dictionary
15 O

15.1 OCTANE
The octane number of a fuel is a number equal to the percentage by volume of iso-octane in a mixture of iso-octane
and normal heptane having the same resistance to detonation as the fuel under consideration in a special test engine.
It is a measure of anti-knock value of a gasoline and, in the case of the special test engine, the higher the octane
number the higher the anti-knock quality of the gasoline.

15.2 OIL RING


A loose ring, the inner surface of which rides a shaft or journal causing the ring to rotate. The ring dips into a
reservoir of lubricant, from which it carries the lubricant to the top of the shaft for distribution to a bearing. Also the
ring on an internal-combustion engine piston which controls the lubrication of the piston and cylinder walls, as
contrasted to the compression rings.

15.3 OIL SHALE


A compacted sedimentary rock consisting mainly of consolidated muds and clays and containing organic matter
which yields oil when destructively distilled but not appreciably when extracted with the ordinary solvents for
petroleum.

15.4 OLEFINS
A class of unsaturated, non-cyclic, aliphatic hydrocarbons of the general formula CnH2n (mono-olefins). Ethene is
the parent member of the group. Not very abundant in crude oils.

15.5 ONCE-THROUGH
An adjective describing:

1. A condition or operation in which no portion of the product is recycled.

2. The products from such an operation.

15.6 ON STREAM
The length of time a unit is in actual production.

15.7 ORGANIC
Designation for a branch of chemistry; treating, in general, of the compounds produced in plants and animals, or of
carbon-hydrogen compounds of synthetic origin; contrasted with inorganic.

15.8 ORIFICE METER


An instrument which measures the flow through a pipe by use of the difference in pressure on the upstream and
downstream sides of an orifice plate.

15.9 ORIFICE PLATE


A device for restricting the flow through a pipe.

15.10 OSMOSIS
Migration of ions or species from an area of high concentration to one of lower concentration.

15.11 OUTPUT
The pneumatic or electronic control signal sent from the control instrument to the valve.

15.12 OVERHEADS
In a distilling operation, that portion of the charge which is vapourised and removed as the total stream from the top
of the column.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 62
Printed Date: 9 July 2008
Operators Dictionary
15.13 OVERLAP
In adjacent fractions, the temperature difference between the initial boiling point of the higher boiling fraction and
the end point of the lower boiling fraction. Specifically the term 'overlap' is only used when this difference is
negative (cf. GAP).

15.14 OXIDATION
The reaction of oxygen with a molecule that may or may not already contain oxygen. Oxidation may be partial,
resulting in the incorporation of oxygen into the molecule or in the elimination of hydrogen from it, or it may be
complete, forming carbon dioxide and water (combustion) - contrast with reduction.

15.15 OXIDIZING FLAME


Term applied to a flame in which there is an excess of air or oxygen.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 63
Printed Date: 9 July 2008
Operators Dictionary
16 P

16.1 PACKED TOWER


A fractionating or absorber tower which is filled with small objects (packing) to effect an intimate contact between
rising vapour and falling liquid.

16.2 PACKING
1. Typically PALL or RASCHIG rings of stainless steel or ceramic as used in a packed tower. May be
DUMPED or STRUCTURED - The latter being assembled rather than tipped in which results in lower p.d.
and increased vapour/liquid contact thus greater efficiency.

2. Any material used to pack, as a layer of material put between the surfaces of a flange or used in a stuffing box
to prevent leakage.

16.3 PALL RINGS


Usually of stainless steel, similar to Rashing rings, but with internal vanes (to increase surface area).

16.4 PARAFFIN-BASE CRUDE


Crude oils which contain paraffin wax but little or no asphaltic matter.

16.5 PARAFFINS
Straight(N) or branched (ISO) open chain saturated hydrocarbons.

16.6 PARAFFIN WAX


Wax of solid consistency having a relatively pronounced crystalline structure, extracted from certain distillates of
petroleum, shale oil etc. Refined paraffin wax has a very low oil content; it is white with some degree of
translucency, almost tasteless and odourless and slightly greasy to the touch.

16.7 PARTIAL CONDENSER


A heat exchanger, which condenses part of a vapour stream. For example, partial condensers are used to condense
the reflux liquid stream and liquid top product from the overhead vapours of a fractionation column.

16.8 PARTIAL PRESSURE


Partial pressure of a component of a mixture in vapour-liquid equilibrium is that part of the pressure which is
contributed by that component.

16.9 PENETRATION
Consistency, expressed as the distance that a standard needle or cone penetrates vertically into a sample of the
material under known conditions of loading, time and temperature. A measure of the hardness and consistency of
asphaltic bitumen by which a weighted special cone or needle will penetrate the sample in five seconds, the
temperature, unless otherwise stated, being 25 C (77 F).

16.10 PERMIT TO WORK


A permit raised for any job that is carried out in the “restricted area”

16.11 PETROIL MIXTURE (2 STROKE MIX)


A lubricating system for small two-stroke gasoline engines, in which the lubricant is mixed in suitable proportions
with a gasoline to make a petrol oil mixture. During its passage through the engine some of the heavier and un-
evaporated petrol oil fractions are deposited on bearing surfaces and so provide lubrication.

16.12 PETROL
Term commonly used for motor spirit or gasoline.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 64
Printed Date: 9 July 2008
Operators Dictionary
16.13 PETROLEUM
A material occurring naturally in the earth, predominantly composed of mixtures of chemical compounds of carbon
and hydrogen with or without other nonmetallic elements such as sulphur, oxygen, nitrogen, etc. Petroleum may
contain, or be composed of, such compounds in the gaseous, liquid, and/or solid state, depending on the nature of
these compounds and the existing conditions of temperature and pressure.

16.14 PETROLEUM NAPHTHA


A generic term applied to refined, partly refined, or unrefined petroleum products and liquid products of natural gas,
not less than 10 percent of which distill below 347 F (175 C), and not less than 95 percent of which distill below
464 F (249 C) when subjected to distillation in accordance with ASTM method D86.

16.15 PETROLEUM SPIRITS


Refined petroleum distillates with volatility, flash point, and other properties making them suitable as thinners and
solvents in paints, varnishes, and similar products.

16.16 PETROLEUM WAX


See crude wax.

16.17 PHENOL
Hydroxyl derivative of aromatic hydrocarbons. Found in effluent water - occurs from contact with certain crude’s.

16.18 PHOSPHATE
1. A salt of phosphoric acid.

2. At NZRC - generally used to refer to TRISODIUM PHOSPHATE, an alkaline water treatment chemical.
Na3Po4

16.19 pH VALUE
The logarithm of the reciprocal of the hydrogen ion concentration. This indicates the acid or alkaline condition of a
substance, pure water and neutral solutions having a pH of 7. Acid solutions have a pH less than 7; alkaline
solutions, a pH greater than 7.

16.20 PIG
Device sent down pipelines for various purposes. Types include Polypigs, swabs, brush pigs, go-devils and linelogs.

16.21 PILOT PLANT


A small version of the full-scale plant in which a laboratory pursues development work, after bench-scale
investigation of a new process has shown promise.

16.22 PIPELINE
A line of pipe with pumping machinery and apparatus for conveying a liquid or gas.

16.23 PISTON
In engines and pumps, a reciprocating device in a cylinder or tube which receives pressure from, or delivers pressure
to, a fluid.

16.24 PISTON RING


A ring used to maintain a gas tight seal between the piston and the cylinder and to control cylinder wall lubrication.

16.25 PITTING
Irregular corrosion in metalwork.

16.26 PLASTICIZERS
Non-volatile liquids or low-melting solids which, when added to another material change certain physical and
chemical properties of that material, mainly imparting greater toughness, improved stability and increased flexibility.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 65
Printed Date: 9 July 2008
Operators Dictionary
16.27 PLATFORMING
A reforming process which makes use of a catalyst containing platinum and excess of hydrogen. Catalytic reforming
of straight-run heavy gasoline (Naphtha) produces a product which is richer in aromatics and branched-chain
paraffins and poorer in naphthenes and straight chain paraffins. The hydrogen produced in this process is used for
hydrodesulphurisation and hydrocracking.

16.28 POLYELECTROLYTE
Substance used to encourage flocculation in water treatment units.

16.29 POLYMER
A substance produced from another by polymerisation, i.e. the combination of a number of identical molecules to
form a larger one.

16.30 POUR POINT


The lowest temperature at which an oil will flow in a laboratory test, measured under specified conditions.

16.31 POWER RECOVERY TURBINE


Equipment designed to utilise the energy given up where a process drops from a high to a lower pressure.

16.32 PREDILUTON (RATIO)


Butane added to short residue to aid dispersal before entering the extractor in the B.D.U.
Ratio of predilution butane to short residue.

16.33 PREHEAT
To heat, previous to some treatment; as an oil to be subsequently distilled, or as a body of gas or oil to be used as
fuel.

16.34 PREHEATER
Any form of apparatus in which heat is applied to a material prior to its introduction into the main heating apparatus.
The application of heat is usually accomplished by means of hot streams which have to be cooled and whose heat
would otherwise be wasted. (See also HEAT EXCHANGER).

16.35 PRESSURE
The force or thrust exerted on a surface, normally expressed as force per unit area. Pressure is exerted in all
directions in a system. Common examples; air pressure in a tyre, or water pressure at some depth in the ocean.

16.36 PRESSURE DROP


The decrease in pressure due to friction, which occurs when a liquid or gas passes through a pipe, vessel, or other
piece of equipment.

16.37 PRESULPHIDE
To add sulphur (as DMDS or CS2) in order to initially activate a catalyst by changing the oxide sites to sulphides.

16.38 PRIMARY
A term used to describe the structure of certain classes of organic compounds, such as alcohol’s and amines. For
example, a primary compound is one in which one hydrogen atom in the carbinol or amino groups is replaced by a
univalent hydrocarbon radical.

16.39 PRIMARY AIR


The air required for combustion in a furnace which is mixed with the fuel (gas, oil, pulverised coal, etc.) in and
through the burner (c.f. Secondary Air).

16.40 PRIMARY PROCESS


A process based on physical separation, e.g. Fractionation, gravity separation.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 66
Printed Date: 9 July 2008
Operators Dictionary
16.41 PRIME MOVER
Any machine capable of producing power to do work.

16.42 PROCESS INTEGRATION


A term denoting the selection and arrangement of refinery processes and the optimum use of the heat contents of the
various plant streams.

16.43 PROMOTER
A substance which may considerably increase the activity of a catalyst. For example the catalytic action of iron is
greatly increased when the catalyst contains a small amount of oxides of aluminium or silicon etc., e.g. C1- on
Platformer and F- on hydrocracking catalysts.

16.44 PROPANE C3H8


A hydrocarbon of the paraffin series used for heating, welding and metal cutting. At ambient temperature it can be
stored under pressure as a liquid.

16.45 PROPYLENE C3H6


A hydrocarbon of the olefin series. Important base material for the chemical industry. Propylene is used to make
iso-propanol, polypropylenes, plasticisers and glycol’s.

16.46 PROSS
Shell computer system for process control and optimisation. This has passed into history in 1999

16.47 PUKING
The foaming and rising of oil to the extent that part of the liquid is driven out of the vessel through the vapour line.
(See also SURGE).

16.48 PURGING
The removal of one fluid from a vessel or plant by introduction and subsequent evacuation of a second fluid. A
common usage of this operation is in the removal of hydrocarbon vapours or air from a plant by flushing with
nitrogen.

16.49 PYROPHORIC
Takes fire spontaneously upon contact with air. Certain forms of iron sulphide exhibit this tendency. (Pyrophoric
iron).

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 67
Printed Date: 9 July 2008
Operators Dictionary
17 Q

17.1 QUENCH
To suddenly cool hot material discharging e.g. into a vacuum column, by injecting cool oil into the base; its purpose
is to check the cracking reaction quickly to avoid coking.

17.2 QUENCH GAS


Cool gas injected between the hydrocracker reactor beds used to control reaction temperature.

17.3 QUENCHING OILS


Specially refined high-flash mineral oils used for hardening alloy steels.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 68
Printed Date: 9 July 2008
Operators Dictionary
18 R

18.1 RADIANT ENERGY


Energy sent out or emitted by rays or waves.

18.2 RADIANT SECTION


Section of a furnace exposed to the actual combustion of the fuel.

18.3 RADIATION
The act of emitting energy, particularly rays of light or heat.

18.4 RADICAL
In chemistry, a group of atoms whose affinity for one another is so strong that, in chemical reactions, the group acts
as a single atom, and is replaced or introduced into a new compound without rearrangement of the atoms bound
together in the radical. It can never exist alone as a separate compound.

18.5 RAFFINATE
The product resulting from a solvent extraction process and consisting mainly of those components that are least
soluble in the solvent.

18.6 RASCHIG RING


Tower packing consisting of a small, hollow cylinder with length equal to its diameter; may be made of metal,
ceramic, plastic or other material.

18.7 REACTION
Any chemical change; the transformation of one or more molecules into other molecules.

18.8 REACTION TIME


The interval during which the material being processed experiences chemical change.

18.9 REACTOR
Term applied to the part of a plant where a chemical reaction takes place.

18.10 REBOILER
A special type of heat exchanger for the supply of heat to the bottom of fractionating columns.

18.11 RECIPROCATING COMPRESSOR


A displacement compressor relying on forward and backward piston movement.

18.12 RECIPROCATING PUMP


A positive displacement pump consisting of a plunger or a piston moving back and forth within a cylinder(s). With
each stroke of the plunger or piston, a definite volume of liquid is drawn in through the suction valve(s) and
subsequently pushed out through the discharge valves(s).

18.13 RECLAIMER
Part of the reformer process used to reclaim valuable Sulfinol solution that would otherwise be lost as condensate.
Also removes impurities (notably DIPA Oxazolidone) from reclaimed Sulfinol.

18.14 RECONTACTING
Process of splitting a stream into separate gas/liquid stream and then recontacting them under pressure. This
improves the quality of both streams (i.e. makes the gas lighter and the liquid denser). Mainly used for maximising
C5 (Pentane) retention as a Mogas blending component.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 69
Printed Date: 9 July 2008
Operators Dictionary
18.15 RECYCLE GAS
Gas fed back from a later stage of process (usually from the separators) to the early stage. Usually impure and
heavy.

18.16 RECYCLE OIL


Oil recycled from a later stage of the process to an earlier one. HCU second stage feed is recycled from the HCU
fractionator and consists of insufficiently cracked material (i.e. heavier than gas oil).

18.17 RECYCLE RATIO


The quantity of recycle stock relative to the quantity of fresh feed. The units of quantity in this relationship vary with
the plant concerned. See also combined feed ratio.

18.18 RECYCLING
a) The maintenance of reservoir pressure through re-injection into the reservoir of the produced gas, after
extraction of the condensate in a gas plant.

b) Continuously feeding back part of a substance obtained or used in a process for further processing or use.

18.19 REDUCED CRUDE


A residual product remaining after the removal, by distillation or other means, of an appreciable quantity of the more
volatile components of crude oil.

18.20 REDUCTION
The removal of oxygen - or addition of Hydrogen to a compound. Effectively the opposite of oxidation.

18.21 REFINERS MARGIN - GROSS


The difference in value between the product value ex refinery and landed value of feedstock and blendstock.

18.22 REFINERS MARGIN - NET


The gross refiners margin less fixed and variable cost of refining.

18.23 REFINERY
A plant, with all its included equipment, for manufacturing finished or semi-finished products from crude oil.

18.24 REFINERY FUEL AND LOSS


The difference in intake and output due to the amount used as fuel and lost through tank breathing etc.

18.25 REFINING
The separation of crude oil into its component parts, and the manufacture therefrom of products needed for the
market. Important processes in refining are distillation, cracking, chemical treating, and solvent extraction.

18.26 REFLUX
A part (if the top product is in the liquid state) or all (if the top product is the vapour phase) of the condensed top
vapour of a fractionating column, which is returned to the top of the column. The purpose is to create an extra
downward flow of liquid; if properly applied this liquid acts as an absorbing agent for the relatively heavy
components which are thus rejected from the top product.

18.27 REFLUX CONDENSER


A condenser which constantly condenses vapours and returns liquid to the original distilling unit or to lower levels of
a fractionating tower.

18.28 REFLUX RATIO


1. The quantity of reflux per unit quantity of distillate removed from the process as a product (forward flow).

2. For design purposes, the ratio of liquid reflux to vapour at any given point in a fractionating column. Values
may range from zero to unity.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 70
Printed Date: 9 July 2008
Operators Dictionary
18.29 REFORMING
1. See catalytic reforming, Platforming.

2. Process for the manufacture of hydrogen from steam and light hydrocarbons.

18.30 REFRACTORY
1. Any material not easily affected by heat, such as firebrick.

2. Difficult to decompose, for example, in cracking gas oil to produce gasoline.

18.31 REFRACTORY BRICK


A brick which is used as a lining for the interior of fireboxes in furnaces and boilers. Refractory brick is constructed
so that it can withstand very high temperatures, but it is not a very good insulator.

18.32 REGENERATION
1. The process of restoring a material to its original strength or properties.

2. In a catalytic process, the reactivation of the catalyst, usually done by burning off the coke deposits under
carefully controlled conditions of temperature and oxygen content of the regeneration gas stream. May be
done in situ or ex situ.

18.33 REGENERATOR
Term applied to the part of a catalytic cracking unit or continuously regenerable platformer (CCR) where the spent
catalyst is regenerated by burning off the coke.

18.34 REID VAPOUR PRESSURE (RVP)


The pressure caused by the vapourised part of a liquid and the enclosed air and water vapour, as measured under
standardised conditions in standardised apparatus: the result is given in Kilo pascals at 37.8oC, although normally
reported simply as "RVP in kPa". There is no simple relation between the RVP and the true vapour pressure of the
liquid. RVP gives some indication of the volatility of a liquid, e.g. gasoline. Lower in summer & higher in winter.

18.35 RELIEF VALVE


A spring loaded valve fitted on any piece of equipment or plant where normal operating pressures are above
atmospheric. This type of valve automatically opens, thus relieving internal pressure when the latter exceeds the
maximum permissible level.

18.36 RERUNNING
The distillation of an oil which has already been distilled. Necessary when a finished batch has been put off grade
for any reason.

18.37 RESEARCH OCTANE NUMBER (RON)


The octane number of a motor gasoline determined in a special laboratory test engine, under mild engine severity
conditions, giving a rough measure of the low speed knock properties of the gasoline.

18.38 RESIDENCE TIME


The average length of time a quantity of reactant spends in contact with catalyst, or within a particular part of the
process.

18.39 RESIDUAL FUEL OIL


Fuel oil consisting mainly of long, short or cracked residue (in contrast to distillate fuel oil).

18.40 RESIDUE
The heavy residual liquid from the atmospheric distillation of crude oil is called long residue. If such residue if
further distilled under vacuum a still heavier residual liquid results, which is called short residue.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 71
Printed Date: 9 July 2008
Operators Dictionary
18.41 RESIN
Organic compounds produced by polymerisation.

1. Water treatment resins are used for water softening. With a very large surface area, liken to a sponge.

2. Epoxy and polyester resins of various types are used as fillers, adhesives and coatings.

18.42 RETAINED EARNINGS


Accumulated profits not distributed to shareholders.

18.43 RETURN BEND


A U shaped pipe fitting, used to connect parallel pipes so that fluid flowing into one will return in the opposite
direction through the other.

18.44 RICH ADIP


Adip containing dissolved H2S.

18.45 RING COMPOUNDS


Organic compounds in which the atoms of a molecule are arranged so as to form at least one closed ring, for
example, naphthenes and aromatics. Also called cyclic compounds.

18.46 RISER
1. That portion of the bubble plate assembly which channels the vapour and causes it to flow upward to escape
through the liquid.

2. Fixed vertical line used to get fire water to high levels.

18.47 ROCKET FUEL


Propellant consisting of two components, oxidiser and fuel, which react to give gaeous products and release energy.
Rocket fuels are compared on the basis of specific impulse, which means the pounds of thrust produced per pound of
fuel burned per second. Rocket fuels may be liquids or solids. In the latter case, the two components must be
intimately premixed. In some instances the liquid system may be a single liquid, in which case it is called a
mono-propellant.

18.48 ROTAMETER
Simple flow gauge utilising a ball or float in a tapered graduated tube. The greater the flow, the more it raises the
ball up the tube.

18.49 ROTARY PUMP


A positive displacement pump used mainly to pump liquids which are either too viscous or too difficult to obtain
suction with a centrifugal pump. There are many types of rotary pump designs. One of the most common is the gear
type, in which two gears mesh and rotate toward each other within a very close-fitting casing. The liquid is trapped
between the gear teeth and the casing and is carried around to the discharge side of the pump. The meshing gear
teeth prevent the liquid from returning to the suction side.

18.50 RUNDOWN TANK


One of the tanks in which are received the condensates from the stills, agitators, or other refinery equipment, and
from which the distillates are pumped to larger tanks known as work tanks or storage tanks. Rundown tanks are also
known as "pans" or receiving tanks. If the condensates were received directly into the large storage tanks, possible
puking of a still could unnecessarily contaminate a large quantity of distillate.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 72
Printed Date: 9 July 2008
Operators Dictionary
19 S
19.1 SAE CLASSIFICATION
The SAE devised a system for the classification of motor oils and transmission oils. It is based on the viscosity at 0
or 100oC. Motor oils are on the scale 5W - 50 and transmission oils are 80-250.

19.2 SAFEGUARDING
Total procedure for safety proofing plant. Includes relief systems, functional logic and
emergency procedures.

19.3 SALT
A compound in which a metal or other positive ion exists in place of the hydrogen of an acid (e.g. sodium chloride,
in which sodium replaces the hydrogen of hydrochloric acid), formed:-

1. By direct replacement of the acid hydrogen with a metal;

2. By neutralisation of the acid with an appropriate alkali; or

3. By double decomposition.

19.4 SAMPLE
Sample of a process flow, tank etc. taken for laboratory analysis.

19.5 SATURATED HYDROCARBON


A hydrocarbon of such molecular structure that all adjacent carbon atoms are connected by not more than one
valence or bond; or, diagrammatically as follows: C-C. Each valence not taken up by adjacent carbon atoms
connects with a hydrogen atom.

19.6 SATURATION TEMPERATURE


Of steam - the temperature at a given pressure, at which steam exists in conjunction with water e.g. 100oC at
atmospheric pressure.

19.7 SCAVENGERS
Chemical additives which remove or inactivate impurities or undesired materials in a mixture or process, e.g.
hydrazine is an oxygen scavenger used in water treatment.

19.8 SCHEDULING
The day to day planning of refinery operations to meet long term programmes.

19.9 SCHOEPENTOETER
Dutch for vane trumpet - an internal distribution device, may be sideways or downwards pointing.

19.10 SEAL
A device used to seal the contents of a pump/compressor from the atmosphere. Occasionally more explosive and
complex then the pump itself.

19.11 SECONDARY AIR


The air which provides the oxygen necessary for the complete combustion of fuel (gas, oil, powdered coal, etc.) and
which was not provided by the burner in the form of primary air.

19.12 SECONDARY PROCESS


A process based on a chemical change, e.g. Hydrocracking, Platforming, usually catalysed.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 73
Printed Date: 9 July 2008
Operators Dictionary
19.13 SEIZE
To stick or fail to function, as in engine bearings, because of expansion, caused by heat, friction, or scoring. Also
called "freeze".

19.14 SENSIBLE HEAT


The heat added to, or taken from, a body when its temperature is changed. Note that no change in stage of the body
(e.g. solid to liquid) is involved, c.f. latent Heat.

19.15 SEPARATOR
1. An apparatus in which heavy liquid impurities are separated from oil.

2. The part of a distilling apparatus in which a partial separation of the vapours is effected by means of contact
with cooling surfaces.

19.16 SEPARATION INDEX


A measure of the degree of separation between components in a distillation column

19.17 SEPARATION PROCESSES


Manufacturing processes based on differences in the physical properties of the components of a mixture. See
Fractionation, Primary Process.

19.18 SETTLER
A separator, a tub, pan, vat, or tank in which the partial separation of a mixture is made due to difference in density.
The operation may be continuous or batch. The separation may be solids from liquid or gas; liquid from gas.

19.19 SETTLING POINT


Laboratory test determining the temperature at which solidification of a molten wax begins.

19.20 SETTLING TANK


A tank employed for separating two liquids which are not miscible. If the liquids do not form an emulsion they
separate into layers according to their specific gravities, and these layers can be drawn off from different levels in the
tank.

19.21 SHAREHOLDERS INVESTMENT


Retained Earnings plus Capital Reserves plus Original Equity = total investment made in the Company by
Shareholders.

19.22 SHIFT REACTION


Conversion of CO to CO2 by addition of water, following general reaction CO + H2O --> CO2 + H2. Both Hi and
low temperature shift reactions are used.

19.23 SHORT RESIDUE


The residue resulting from vacuum distillation of long residue. (Removal of vacuum gas oil and
waxy distillate).

19.24 SIDE STRIPPER


A fractionating column for stripping undesired volatile components from a side stream which is drawn off as a liquid
from a main fractionating column. Various fractions may be drawn off from one main column, and be stripped in as
many side strippers.

19.25 SIDESTREAM
A liquid stream taken from any one of the intermediate trays of a trayed distillation column.

19.26 SIEVE TRAYS


Fractionating trays consisting of sieve-like materials, generally perforated plate. The flow is essentially of the dual
type, but this character may be reduced by the provision of downcomers.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 74
Printed Date: 9 July 2008
Operators Dictionary
19.27 SIGHT GLASS
Device used to directly show the level in a vessel, boiler, etc. by means of a glass tube.

19.28 SILVER STRIP


A very strict corrosion test for AVTUR.

19.29 SLACK WAX


See Crude wax.

19.30 SLIDE VALVE


A type of valve for controlling or shutting off the flow of catalyst in a continuous regeneration unit.

19.31 SLOPS
A term loosely used to denote:

1. Crude oil containing excessive water contamination which must be removed by settling before pumping to
the crude distiller.

2. All products which are off-specification and must be reprocessed before marketing. Such products are for
example produced during the start-up period.

19.32 SLUDGE
a) Acid sludge or acid tar: material formed during refining of oils with sulphuric acid.

b) Engine sludge: insoluble product formed from fuel combustion products and from lubricating oils in internal
combustion engines and deposited on parts outside the combustion space.

c) Tank sludge: material collected at the bottom of oil storage tanks.

19.33 SMOKE POINT


The maximum height of flame measured in millimetres at which a kerosene will burn without smoking when tested
in a standard lamp for this purpose.

19.34 SOLAR ENERGY


Energy produced by radiation from the sun.

19.35 SOLUBLE OIL


Oil which readily forms stable emulsions or colloidal suspensions in water. Used as a cutting fluid in machine work.

19.36 SOLUTION
A homogenous mixture of two or more chemically un-reacted fluids.

19.37 SOLVENT
A substance, usually liquid, capable of dissolving another liquid, gas or solid to form a homogenous mixture.

19.38 SOLVENT EXTRACTION


See Extraction.

19.39 SOLVENT/FEED RATIO


On the BDU, the rate of the total amount of butane (predilution and normal) to short residue.

19.40 SOOTBLOWER
A device for removal of soot from furnace tubes - to increase heat transfer - - generally using a steam blast nozzle.
However, a shot drop system (as on the HCU) does the same job and is sometimes referred to as a sootblower.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 75
Printed Date: 9 July 2008
Operators Dictionary
19.41 SOUR CRUDE
Crude oils containing an abnormally large amount of sulphur and sulphur compounds which break down upon
refining to liberate troublesome quantities of corrosive sulphur compounds. This is a relative term.

19.42 SOUR GAS


Gas which contains objectionable amounts of contaminants, e.g. hydrogen sulphide and other corrosive sulphur
compounds.

19.43 SOUR GASOLINE


Gasoline fractions which contain a certain amount of mercaptans and therefore must be sweetened.

19.44 SOUR WATER


Water which contains objectionable amounts of dissolved contaminants, e.g. hydrogen sulphide, ammonia, phenols
etc.

19.45 SPACE VELOCITY


A convenient unit for expressing the relationship between feed rate and reactor volume in a flow process. It is
defined as the volume or weight of feed (measured at standard conditions) per unit time per unit volume of reactor or
per unit weight of catalyst.

19.46 SPADE
A solid plate inserted in a flanged joint to positively isolate one side of the flange from the other. Also called blank,
banjo.

19.47 SPALLING
Flaking of the surfaces of metals or refractories, leaving new surfaces exposed.

19.48 SPARGE
Spray - usually with water (originally a brewers term).

19.49 SPARK ADVANCE


In an ignition-type internal-combustion engine, the amount measured in degrees of crankshaft rotation, that the spark
plug fires before the piston reaches the point of its traverse closest to the cylinder head.

19.50 SPECIFIC GRAVITY


The ratio of the weight of a volume of a body to the weight of an equal volume of some standard substance. In the
case of liquids and solids, the standard is water, in the case of gases, the standard is hydrogen or air.

19.51 SPECIFIC HEAT


The ratio of the quantity of heat required to raise the temperature of a body by one degree to that required to raise the
temperature of an equal mass of water by one degree.

19.52 SPECTACLE
Or Spec blind. A figure of 8 shaped plate that can be either put to the open or closed position, but always stays in the
line.

19.53 SPHERE - SEE HORTON SPHERE

19.54 SPLITTER
A fractionating tower with overhead and bottoms product streams only.

19.55 SPOT
Refers to prices of single cargoes traded on an open market basis. They can vary considerably with the
supply/demand situation.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 76
Printed Date: 9 July 2008
Operators Dictionary
19.56 STABILISATION
The process of separating light gases from petroleum or gasoline, thus leaving the liquid stable in the sense that it can
be handled or stored with less liability to change in composition.

19.57 STABILISED GASOLINE


Gasoline after subjection to fractionation by which the vapour pressure has been reduced to a specified maximum.

19.58 STABILITY
Resistance of petroleum products to chemical change. Gum stability means the resistance of a gasoline to gum
forming while in storage. Oxidation stability means that the product is stable to oxidation, i.e resists the action of
oxidation which forms gums, sludges etc.

19.59 STABILISER
A fractionating column designed to make a sharp separation between very volatile components and gasoline ex crude
oil, casing head gasoline or pressure distillate, thus controlling the gasoline’s Reid vapour pressure.

19.60 STADIS
An anti static additive.

19.61 STANDARD PRESSURE


Pressure under which the mercury barometer stands at 760mm, or 30in. (Equivalent to approximately 14.7 psia).

19.62 STANDARD REFINERY FUEL (SRF)


A hypothetical refinery fuel with a gross calorific value of 10336 Kcal/kg. Allows all refinery fuel components to be
converted to an SRF equivalent based on calorific values.

19.63 STAND-BY
A term used to designate emergency auxiliary equipment which is not used during normal operation.

19.64 STAND PIPE


Any pipe that stands proud from a base, e.g. Fireman’s stand pipe for tapping into an underground main or a vessels
internal stand pipe to avoid ingress of dirt, scale etc. from the base of the vessel.

19.65 STATIC ELECTRICITY


The electricity generated by the relative movement of unlike materials such as oil/pipeline, oil/water, plastic
granules/vessel; or by the operation of equipment such as driving belts.

19.66 STEAM/AIR DECOKING


In heavy oil furnaces over the period of a process run, the differential pressure across the furnace tubes may increase
until it is uneconomical to continue the run. This high pressure drop is caused by carbon built up on the inside of the
tubes. We can burn this carbon off by steam/air decoking.

19.67 STEAM DISTILLATION


A distillation in which vaporisation of the volatile constituents is effected at a reduced temperature by introduction of
steam directly into the charge. Steam used in this manner is termed open steam.

19.68 STEAM REFORMING


As used in the reformer for manufacture of H2 - follows general formula CH4 + H20 --> 3H2 + CO.

19.69 STEEL
A solid state mixture of iron and 1-4% carbon. Can have different structures e.g.
Austenitic - strong, ductile
Pearlitic - low mechanical strength, eventually occurs in furnace tubes when
subjected to flame impingement
Martensitic - Very hard - used in valve faces etc.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 77
Printed Date: 9 July 2008
Operators Dictionary
19.70 STONEWALL
The condition where a centrifugal compressor is delivering its maximum flow.

19.71 STRAIGHT-RUN
A term applied to a product of petroleum made by distillation without conversion.

19.72 STRAINER
Alternative term for filter. Used for removal of fine material.

19.73 STRAPPING
The measurement of the external diameter of a cylindrical tank by stretching a steel tape around each course of the
tank's plates and recording the measurement.

19.74 STREAM DAY


Denoting 24 hours of actual operation of a refinery unit; in contrast to a calendar day, i.e. takes into account the units
availability factor.

19.75 STRIPPING
Removal of the lightest fractions from a mixture. The process is usually carried out by passing the hot liquid from a
flash drum or tower into a stripping vessel or stripping section of a column, through which open steam or inert gas is
passed to remove the more volatile components of the cut. A fractionating process, closely related to distillation by
which undesired volatile components are separated from a liquid mixture by fractional evaporation. The desired
fraction is thus purified from lower boiling components. Stripping is generally effected by the introduction of steam,
by the reduction of pressure, by the vapour generated in a reboiler or a combination of these. In the laboratory
nitrogen is often used as a stripping agent.

19.76 STUFFING BOX


A device affording the passage and the length wise and rotary motion of a piston rod, shaft, or some similar moving
piece while maintaining a fluid-tight seal about the moving part.

19.77 SULFINOL PROCESS


A process for removing contaminants such as carbon dioxide from gases by contacting with a regenerable solvent.
Sulfinol is a three component solvent combining the chemical properties of the ADIP solvent with physical
properties of sulfolane and water.

19.78 SULFOLANE
Tetrahydro - Thiophene - Dioxide - A component of sulfinol solution.

19.79 SULPHATE
A salt of sulphuric acid, e.g. sodium sulphate, Na2SO4, or ethylsulphate (C2H5)2SO4.

19.80 SULPHIDE
Any of the compounds resulting from the combination of sulphur ions (S==) with metallic or other positive ions, or
organic radicals.

19.81 SULPHUR
At NZRC, the final product from H2S removal. A non-metallic element of lemon-yellow colour, sometimes known
as brimstone. Sold in liquid form to fertilizer works.

19.82 SULPHUR CEMENT


Hard, high melting point solid formed by the mixing of refractory brickwork and liquid sulphur.

19.83 SULPHUR DIOXIDE


A colourless gas, SO2, a by product of combustion of sulphurous fuels.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 78
Printed Date: 9 July 2008
Operators Dictionary
19.84 SULPHURIC ACID
Traditionally known as Oil of Vitrol. A combination of sulphur trioxide with water (SO3+H20=H2SO4). it is a eavy,
strongly oily liquid, an important water treating agent.

19.85 SUPERHEATER
Apparatus which imparts heats to a liquid above that required for vapourisation. e.g. as used for adding heat to steam
above the saturation temperature.

19.86 SURFACE AREA


The sum of the outer and inner surfaces. A porous solid may be said to have two different types of area - one made
up of the external, the geometric, or the outer surface of the particle; the other, called the inner, made up of the walls
of capillaries, crevices, and cracks in the particle. The sum of these is the total surface area. The ratio of total to
outer area is sometimes known as the roughness factor.

19.87 SURFACE TENSION


The force exerted by the particles of a liquid at its surface which maintains a continuous surface. The surface tension
is determined by measuring the energy required to increase the surface by the unit of area. That property, due to
molecular attractive forces and existing in the surface film of all liquids, which tends to bring the volume contained
in the liquid surface film into a form having the least surface area.

19.88 SURFACRANTS
(Surface active agents) ie trace chemical species which can adversely affect the water shedding properties of fuel.

19.89 SURGE
1. An upheaval of fluid in a system frequently causing a carryover of liquid through the vapour lines (see also
PUKING).

2. An undesirable condition of unstable flow occurring within centrifugal compressors when the surge
parameter drops below a critical value. A very dangerous condition for the compressor, hence the need for
surge protection (anti-surge line).

19.90 SURGE DRUM


Vessel used to even out the flow into a unit, as the unit throughput and the feed rate may vary. See also buffer.

19.91 SURGE PARAMETER


Indication of nearness to surge condition based on process instrumentation.

19.92 SUSPENSION
A heterogeneous mixture of one or more materials - distinct from a solution. The state of a solid or liquid when its
particles are mixed with and buoyed in another liquid but are not dissolved by it. A suspension of a liquid in a liquid
is called an emulsion.

19.93 SWEET GAS


Hydrocarbon gas free from sulphur compounds.

19.94 SWEETENING
The process by which petroleum products are improved in odour and colour by oxiding or removing the
sulphur-containing and unsaturated compounds. The conversion of the mercaptans present in sour gasoline into
non-smelling disulphides.

19.95 SYNFUEL
A fuel made by the catalytic deoxidisation of methanol using the MOBIL ZSM-S catalyst. It is blended by NZRC
into gasoline or sold as unleaded 92 RON gasoline overseas.

19.96 SYNTHESIS
The act or process of making or building up a compound by the union of simpler compounds or of its elements.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 79
Printed Date: 9 July 2008
Operators Dictionary
20 T

20.1 TANK CAR


A cylindrical metal tank mounted on an underframe and trucks so that it can be run along a railroad.

20.2 TANK FARM


Area in which a number of storage tanks are located.

20.3 TANK VOLUME


GROSS - total amount of pumpable material plus tank bottoms.
NET - total amount of pumpable material only.

20.4 TANKAGE
The capacity of a tank, or of a series of tanks, in the same field.

20.5 TANKER
A ship especially constructed for the transportation of oil.

20.6 TEMPERATURE
An arbitrary measurement of the degree of heat possessed by a body. It should be distinguished from heat itself.
Heat is a form of energy; temperature is a measurement of its intensity.

20.7 TEMPERATURE GRADIENT


The difference in temperature between two locations, e.g. between the top and bottom of a distillation column. Often
expressed as temperature difference per unit length.

20.8 TEROMAN
A computerised maintenance management system. (Now not used in NZRC)

20.9 TETRAETHYLLEAD (TEL)


It is added to gasoline to prevent knocking (increase octane number) in internal combustion engines. Not used at
NZRC.

20.10 TETRAMETHYL LEAD (TML)


Is added to motor gasoline to prevent knocking in internal combustion engines. It is more effective than TEL in
improving the Road Octane Number of a gasoline at a certain RON level, as a result of its higher volatility. Not used
at NZRC

20.11 THERM
Unit of heat equal to 100,000 Btu.

20.12 THERMAL CRACKING


Process of breaking down the larger molecules of heavy oils into smaller ones by the action of heat. In this way
heavy oils can be converted into lighter and more valuable products.

20.13 THERMOCOUPLE.
The junction of two wires of dissimilar metals, which develops an electrical potential that is a function of the
temperature. An instrument for measuring temperature by means of the electrical potential produced at a heated
junction of two dissimilar metals.

20.14 THERMOSTAT
An automatic device for regulating temperature.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 80
Printed Date: 9 July 2008
Operators Dictionary
20.15 TOLUENE C6H5CH3
An aromatic hydrocarbon, used in the manufacture of the explosive TNT (trinitrotoluene) and in the production of
dyestuffs and pharmaceuticals.

20.16 TONNAGE (MARINE)


A marine measurement term. Gross tonnage is the total internal volume of the hull and all superstructures, such as
deck houses, etc. being expressed in tons of 100 cubic feet or approximately 2.83 cubic metres. Deadweight tonnage
(d.w.t.) is the weight of the cargo, stores, bunkers and water which the ship can lift, expressed in long tons (2,240lb
or 1016 kg).

20.17 TOPANOL
An inhibitor to prevent the formation of gum during storage of petroleum products. Gum forms as a result of the
polymerisation of unsaturated hydrocarbons under the influence of peroxides. Topanol is added to prevent peroxide
formation.

20.18 TOPS
The lightest gasoline fractions obtained when distilling crude oils. also generally: the top product of any
fractionating column.

20.19 TORQUE
An engineering term defined as the product of force times the length of the lever arm. It is a measure of the ability to
produce rotation.

20.20 TOTAL ORGANIC CARBON (TOC)


Amount of organic carbon in sample, determined by oxidation to CO2.

20.21 TOTAL SUSPENDED SOLIDS (TSS)


A water specification, undissolved solid matter greater than 1.5 microns.

20.22 TOWER
An apparatus for increasing the degree of separation obtained during the distillation of oil in a still. Towers may be
divided into two general classes: those which secure separation by fractionation, and those which take advantage of
partial condensation only. Towers of the first class are used when accurate work is necessary, as in the production of
naphthas and gasoline. Condensation towers are used to divide roughly the vapours from a still into several liquid
portions.

20.23 TRANSFER LINE


A pipe through which material being processed flows from one piece of equipment to another.

20.24 TRANSFORMER OIL


Oil used in transformers to remove the heat generated in the core and coils and to provide insulation between live
parts. Transformer oil as a rule is a highly refined spindle type oil. A high degree of refining is required to give the
oil good dielectrical properties.

20.25 TRAP
1. A device or piece of equipment for separating one phase from another, as liquid from a gas or condensate
from steam.

2. Any geological formation that will trap hydrocarbons e.g. fault, salt dome, discontinuity

20.26 TRAYS
See fractionating trays.

20.27 TREATING PROCESSES


Supplementary refining processes in which undesirable constituents (mainly olefinic and oxygen, nitrogen and
sulphur containing compounds) are removed or converted into less harmful compounds so as to meet the product
specifications for further processing or for marketing.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 81
Printed Date: 9 July 2008
Operators Dictionary
20.28 TRIP SYSTEM
A system of fail safe partial and total shutdown mechanisms to protect the plants safety under extreme operating
conditions.

20.29 TRYCOCKS
A series of valves for double checking the supposed level in a sight glass.

20.30 TURBINE
A rotating prime mover actuated by either the reaction or the impulse, or both, of a current of water, steam or gas,
usually on a series of curved vanes attached to a central shaft. (Steam turbines only used at NZRC).

20.31 TURBINE OIL


A specially refined, inhibited lubricating oil used to lubricate steam turbines.

20.32 TURBOJET ENGINE


An engine in which air is compressed by a rotating compressor, is heated by fuel combustion at compressor pressure,
released through a gas turbine which drives the compressor, and finally ejected at high velocity through the rearward
exhaust nozzle.

20.33 TURNAROUND
Time necessary to clean and make repairs on refining equipment after a normal run. It is the elapsed time between
drawing the fires ( shutting the unit down) and putting the unit onstream again.

20.34 TURN DOWN


Amount or percentage by which a unit or plant may be turned down from its maximum. Typically 50% is the
minimum. (The plants are designed to run at /or close to maximum).

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 82
Printed Date: 9 July 2008
Operators Dictionary
21 U

21.1 ULLAGE
The volume of space in a container unoccupied by contents. Hence ullaging, a method of gauging the contents of a
tank by measuring the height of the liquid surface from the top of the tank. See dipping.

21.2 UNSATURATED.
A term applied to organic compounds in which some carbon atoms are held together by double or triple bonds, so
that these compounds are under favourable conditions, capable of combining with other elements or compounds.

21.3 UPPER EXPLOSIVE LIMIT


The richest mixture that will explode. A lesser air/hydrocarbon ratio will not ignite.

21.4 UPSTREAM
Towards the start of the process e.g. crude storage, feed pumps, pre-treatment etc.
In the business sense, exploration and crude production from wells.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 83
Printed Date: 9 July 2008
Operators Dictionary
22 V

22.1 V50
A viscosity index (at 50oC) which enables linear viscosity blending calculations.

22.2 VACUUM
A space entirely devoid of matter (called specifically absolute vacuum); a space, such as the
interior of a closed vessel, exhausted to some degree by a steam ejector set or other artificial
means. (Any vacuum less than absolute is a partial vacuum).

22.3 VACUUM DISTILLATION


Distillation of a liquid under reduced pressure, aimed at keeping the temperature level so low as to prevent
appreciable cracking. For example used to distill vacuum gas oil and waxy distillate feedstock from long residue,
leaving the short residue as remainder, also used for manufacture of bitumen.

22.4 VALENCE
The combining power of an element, as exhibited by the number of atomic weights of hydrogen with which one
atomic weight of the element will combine. Certain atoms are capable of combining with others in different
proportions; they are said to have a number of valences or are multi valent.

22.5 VALVE
Apparatus used to control the flow or supply of gases, liquids or fluidised solids.

22.6 VALVE TRAYS


Fractionating trays consisting of a plate with holes for vapour passage, characterised by the presence of valves over
these holes. These valves are aimed at preventing liquid passage (if liquid pressure should become too high) while
allowing flexibility in vapour passage (depending on pressure of the vapour). The flow is meant to be of the single
type, and downcomers are generally provided.

22.7 VAPOUR
Gaseous substance which can be at least partly condensed by cooling or compression.

22.8 VAPOUR DENSITY


The weight per unit volume of gas e.g. grams per litre or pounds per cubmic foot.

22.9 VAPOUR LINE


The pipe through which vapours are led from a column to a condenser.

22.10 VAPOUR LOCK


A condition which arises when a gas or vapour is present in the fuel line or fuel pump in sufficient volume to
interfere with or prevent the flow of fuel to the carburettor of an engine.

22.11 VAPOUR PHASE


The term describing a substance in the gaseous state, under conditions in which it is capable of being liquefied either
by pressure or cooling or a combination of both.

22.12 VAPOUR PRESSURE (AT GIVEN TEMPERATURE)


The pressure exerted by the vapours released from any material, at a given temperature, when enclosed in a
vapour-tight container. The lower pressure at which a liquid, contained in a closed vessel at the given temperature,
can remain in the liquid state without evaporation. Lowering the vessel pressure below the vapour pressure results in
evaporation of part or all of the liquid. A compound or fraction with a high vapour pressure requires a high pressure
to be kept as a liquid, thus it is volatile.

22.13 VAPORISATION
The conversion of a liquid to its vapour, such as the changing of water into steam.
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 84
Printed Date: 9 July 2008
Operators Dictionary
22.14 VENTURI METER
A specially designed tube for measuring the rates of flow of gases or liquids, having a constriction or throat with
convergent upstream and divergent downstream walls, the angles of which are such that streamline or almost
streamline flow through the tube is achieved. The rate of flow is measured by the pressure drop across the throat.

22.15 VENTURI TUBE


A tube, inserted in a line, whose internal surface consists of two truncated cones connected at the small ends by a
short cylinder (the throat). As the velocity of flow of the fluid increases in the throat, the pressure decreases. The
tube is used to measure the quantity of fluid flowing or, by jointing a branch tube at the throat, to produce suction.

22.16 VISCOSIMETER
Instrument for measuring viscosities.

a) Absolute viscosity is determined by a capillary type instrument. The time required for a sample to flow
through a known length of glass capillary is registered. Results are often given in centistokes or Centipoise.

b) In the petroleum industry the viscosity is generally determined in standardised instruments consisting of a
container with a hole or jet in the bottom. Various types are used, viz in the UK, the Redwood 1 and
Redwood 11, in the USA the Saybolt Universal and Saybolt Furol and on the European continent the Engler
viscosimeter. Results with the Redwood and Saybolt viscosimeters are expressed in seconds, those with the
Engler in Engler degrees.

22.17 VISCOSITY
The dynamic viscosity of a liquid is a measure of its resistance to flow. It is defined as the force per unit surface
required to shear a layer of unit thickness at unit velocity. The kinetic viscosity is equal to the dynamic viscosity
divided by the density of the liquid. If no distinction is made the dynamic viscosity is usually meant.

22.18 VISCOSITY INDEX


A method of indicating the viscosity/temperature of an oil. Oils are generally classed as high, medium and low
viscosity index oils (HVI, MVI, LVI).

22.19 VOLATILE
Term applied to materials which have a sufficiently high vapour pressure at normal temperature to evaporate readily
at normal atmospheric pressure and temperature. It implies a high degree of volatility.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 85
Printed Date: 9 July 2008
Operators Dictionary
23 W

23.1 WASH OILS


petroleum fractions employed for the absorption of the relatively heavy and easily liquefiable components of a
mixture of gases (to reduce gas stream density).

23.2 WASH WATER


Water injected into a process either for scrubbing a recycle gas or for corrosion protection in critical parts of the unit.

23.3 WASTE HEAT BOILER


Equipment used for generation of steam etc. from excess heat in stack gases.

23.4 WATER BOTTOM


Water accumulated at (or sometimes added to) the base of the oil in a storage tank. In cases where the tank bottom is
very uneven, the water level assists in the accurate measurement of the oil content of the tank.

23.5 WATER SOFTENING


Process of removing free ions from water - see deionised water.

23.6 WAXY DISTILLATE


A fractional cut about equal to the middle section of long residue. Hydrocracker Feedstock.

23.7 WEAR
The attrition or rubbing away of the surface of a material as a result of mechanical action.

23.8 WEATHERING
The often undesired process of slow evaporation of volatile fractions from a petroleum fraction during storage. It is
promoted by breathing.

23.9 WEIGHTED AVERAGE BED TEMPERATURE (WABT)


The sum of the individual bed temperature weighted for the amount of catalyst in each bed, divided by the total
catalyst weight.
The WABT is often 'normalised', to take account of changes in feed type or reaction severity, to allow direct
comparison on the same base.

23.10 WEIR
A wall or partition for maintaining a level of liquid, used in fractionator trays and kettle reboilers.

23.11 WET GAS


petroleum gas containing such quantities of the lower members of the paraffin hydrocarbon series (propane, butane
etc.) that the recovery of liquid products from that gas may be economical. A gas containing a relatively high
proportion of hydrocarbons which are recoverable as liquids.

23.12 WHESSOE
Tank gauging systems used in oil movements.

23.13 WHITE OIL


Generic name applied to highly refined, colourless hydrocarbon oils.

23.14 WHITE PRODUCTS


Light petroleum products such as gasoline, white spirit and kerosene.

23.15 WHITE SPIRITS


Fractions intermediate between gasoline and kerosene with a boiling range of approximately 150-200 C. They are
used in paints and dry cleaning. Not an NZRC product.
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 86
Printed Date: 9 July 2008
Operators Dictionary
23.16 WIDE RANGE DISTILLATE
A distillate with a wide boiling range. As a combination of gasoline and kerosene fractions it is used for aircraft
powered by gas turbines.

23.17 WORK SAFE AUDIT


A method of assessing any job for unnecessary risk. Can be done by another or by oneself.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 87
Printed Date: 9 July 2008
Operators Dictionary
24 X

24.1 XRAY
Otherwise known as Rontgen rays. One of the highly penetrating radiations similar to Gamma rays; they do not
come from the nucleus of the atom, but from the surrounding electrons. They are produced by electron
bombardment. Applications; analysis (fluorescent x-ray spectroscopy); non-destructive testing, e.g. tube walls in
furnace.

24.2 XYLENE C6H4 (CH) 2


An aromatic hydrocarbon of which there are three isomers (ortho, meta and para). An important constituent of
gasoline.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 88
Printed Date: 9 July 2008
Operators Dictionary
25 Y

25.1 YARD PIPE (YP)


Any of the pipes within the Tank Farm used for rundown, transfer, shipping etc. As distinct from the pipes within
the unit battery limits. The yard pipes are numbered.

25.2 YIELD
The amount of a desired product or products obtained in a given process, expressed as a percentage of the feedstock.
There are many yields, each of which should be specifically defined when used, e.g. Saleable yield is the volume %
of feedstock turned into saleable product.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 89
Printed Date: 9 July 2008
Operators Dictionary

26 REGULARLY USED ABBREVIATIONS

A Absolute (Pressure or Temperature)


ABS Asphalt Burning System
AFQRJOS Aviation Fuel Quality Requirements for Jointly Operated Systems
AFRA Average Freight Rate Assessment
AGST Authorised Gas Safety Tester
AGO Automotive Gas Oil
AIP Australian Institute of Petroleum
AN Asset North
AO Asset Offplot
AOC Accidentally Oil Contaminated Sewer
APC Advanced Process Control.
API American Petroleum Institute
ARPS Asset Release Permit Signatory
AS Asset South
ASA Anti-static Additive
ASTM American Society for Testing Materials
ATCE Average Total Capital Employed
B
BA Breathing Apparatus
BBL Barrel
BBL Block Battery Limit
BBU Blown Bitumen Unit
BCW Boiler Circulation Water
BDU Butane Deasphalt Unit
BFW Boiler Feed Water
BHP Brake Horse Power
BOD Biochemical Oxygen Demand
BS&W Basic Sediment & Water
BTHU, BTU British Thermal Unit
C
o
C Centigrade (or Celsius)
CAD Computer Aided Design
CAM Computer Aided Management
CASS Critical Activity Specification Sheet.
CASP Computer Aided Shutdown Planning
CD Crude Distiller
CEL Corrected Energy and Loss
CFPP Cold Filter Plugging Point
CFR Combined Feed Ratio
CFR Co-operative Fuel Research Council
CO Cooling Oil
CO Carbon Monoxide
CO2 Carbon Dioxide
COC Continuously Oil Contaminated Sewer
COD Chemical Oxygen Demand
COW Crude Oil Wash
CP Centipoise
CPA Critical Path Analysis
CPR Cardio Pulmonary Resuscitation
CPSL Competitive Price and Supply Level
CR Compression Ratio
CRI Criteria Referenced Instruction
CS centistokes
CTL Coastal Tankers Ltd
CW Cooling Water
CWD Combined Waxy Distillate
D
DAO De-asphalted Oil
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 90
Printed Date: 9 July 2008
Operators Dictionary
dB(A) Scale for measuring all levels of Noise
DCF Discounted Cash Flow
DEP Design & Engineering Practice
DERD Min of Defence Directorate of Engines
DERV Diesel Engined Road Vehicle
DFE Di-Fluoro Ethylene
DIPA DI Iso Propanol Amine
DMDS Di Methyl Di Sulphide
DOL Department Of Labour
DRG Drawing
DWT Dead Weight Tons
E
ECC Employee Consultative Committee
EMPRV Maintenance planning & Scheduling system used at NZRC.
ENCHEM Energy & Chemical Plant (NZQA National Certificate levels 2 & 4)
EOR End of Run
EPC Enhanced Process Control.
ESO Emergency Shut Off
ETA(D) Estimated Time of Arrival (Departure)
F
o
F Fahrenheit
FBP Final Boiling Point
FC Foecal Coliform
FIFO First In First Out
FMA Free Mineral Acidity
FO Flushing Oil
FOB Free On Board
FOR Flushing Oil Return
FOS Flushing Oil Supply
FVI Flexible Volatility Index
G
GLC Gas Liquid Chromatography
GCWR Gland Cooling Water Return
GCWS Gland Cooling Water Supply
GM General Manager
GRM Gross Refiners Margin
GSC Gas Solid Chromatography
GSP Government Selling Price
H
HCC Hydrocarbon Collecting System
HCU Hydrocracker Unit
HBFW/HHFW HP Boiler Feed Water
HDS Hydrodesulphuriser
HDT Hydrotreater
HITLOP High Temperature Low Pressure
HMU Hydrogen Manufacturing Unit
HR Human Resources
HSE Health, Safety & Environment
HTS High Temperature Shift
HVI High Viscosity Index
HVU High Vacuum Unit
HWD Heavy Waxy Distillate
H2S Hydrogen Sulphide
I
IBP Initial Boiling Point
ICA Ignition Control Additive
ID Internal Diameter
IGS Inert Gas System
IP Institute of Petroleum
ISP Information Systems Planning
J
JFTOT Jet Fuel Thermal Oxidation Test
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 91
Printed Date: 9 July 2008
Operators Dictionary
K
K Kelvin (temperature scale)
KHT Kerohydrotreater
KHDS Kerosene Hydrodesulphuriser
KSLA Koninklijke Shell Laboratorium Amsterdam (Shell Research Centre)
kWh Kilowatt Hour
L
LEL Lower Explosive Limit
LHSV Liquid Hourly Space Velocity
LIFO Last In First Out
LNG Liquefied Natural Gas
LOIT Local Oil Inland Trade
LP Linear Programme
LPG Liquefied Petroleum Gas
LTI Lost Time Injury
LTS Low Temperature Shift
LVI Low Velocity Index
LWD Light Waxy Distillate
M
MCF Methyl Chloroform
MESC Material and Equipment Standards and Code
MDFI Mid Distillate Flow Improper
MLSS Mixed Liquor Suspended Solids
MMI Man Machine Interface
MON Motor Octane Number
MOV Motor Operated Valve
MPMP Multi Period Multi Product
MSDS Material Safety data Sheets
MVI Medium Viscosity Index
N
NaOH Sodium Hydroxide (Caustic Soda)
NHDT Naptha Hydrotreater
NH3 Ammonia
NIAT Net Income After Tax
NIBT Net Income Before Tax
NNF Normally No Flow
NPV Net Present Value
NRV Non Return Valve
NSHP Net Suction Head Pressure
NZRC The New Zealand Refining Company Ltd
NZQA New Zealand Qualifications Authority
O
OEL Occupational Exposure Limit
OD Outside Diameter
OPCO Operating Company
OPEC Organisation of Petroleum Exporting Countries
OSH Occupational Safety & Health
P
PAG Project Approval Group
PCA Polycyclic Aromatic
PCR Plant Change Request
PEFS Process Engineering Flow Scheme
PEUFS Process Engineering Utilities Flow Scheme
PFS Process Flow Scheme
pH Power of Hydrogen Ion
PICW Person in Charge of Work
PID Proportional, Integral, Derivative
PITO Petrochemical Industry Training Organisation
PK Premium Kero
PLS Production Laboratory Standing Instructions
PM Pensky Martin
PM Planned Maintenance
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 92
Printed Date: 9 July 2008
Operators Dictionary
PONA Paraffins, Olefins, Naphthenes, Aromatics
PROSS Process Control and Supervisory System
PRT Power Recovery Turbine
PPE Personal Protective Equipment
PPM(b) Parts per Million (billion)
PPI Parallel Plate Interceptor
PPR Plant Project Request
PSA Pressure Swing Adsorption
PSFS Process Safeguarding Flow Scheme
PSIA(G) Per Square Inch Absolute (gauge)
PSV Pressure Safety valve
PTW Permit to Work
PV Process variable
O
QMI Quality Measuring Instrument
R
RAP Refinery Auckland Pipeline
RBU Refinery Business Unit
RCU Remote Control Unit
RFB Regenerable Free Base
RFL Refinery Fuel and Loss
RFSU Ready For Start Up
RIF Report Input Form
RON Research Octane Number
ROV Remote Operated Valve
RPM Revolutions Per Minute
RSI Refinery Steering Instructions.
RTU Remote Terminal Unit
RUPIA Residue Upgrading Performance Index Actual
RV Relief Valve
RVP Reid Vapour Pressure
S
SAC Strong Acid Cation
SAE Society of Automotive Engineers
SAFETNET Computer Database system used by NZRC to store HSE information
SBA Strong Base Anion
SCADA Supervisory Control and Data Acquisition
SCBA Self Contained Breathing Apparatus
SCR Software Change Request
SD Shutdown
SDWT Short Dead Weight Tons
SG Specific Gravity
SI Standing Instruction
SIOP Shell International Oil Products
SMOC Shell Multi Verbal Optimising Control
SO Seal Oil
SO2(O3) Sulphur Dioxide (trioxide)
SOR Start of Run
SP Set Point
SPL Sound Pressure Level
SRF Standard Refinery Fuel
SRU Sulphur Recovery Unit
STEL Short Term Exposure Limit
SSV Settled Sludge Volume
SU Start Up
SVI Sludge Volume Index
SWL Safe Working Load
SWS Sour Water Stripper
T
TAB Total Aerobic Bacteria
TBP True Boiling Point
TDC Total Distributed Control
Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 93
Printed Date: 9 July 2008
Operators Dictionary
TDS Total Dissolved Solids
TEL Tetraethyl Lead (Not used any more)
TLF Truck Loading Facility
TLV Threshold Limit Value
TML Tetramethyl Lead (Not used any more)
TOC Total Organic Carbon
TOIT Total Oil Inland Trade
TPI Tilted Plate Interceptor
T/SD Tonnes Per Stream Day
TSO Tight Shut Off (Valve)
TSS Total Suspended Solids
TWA Time Weighted Average
U
UEL Upper Explosive Limit
US Un-Serviceable
V
VGO Vacuum Gas Oil
VLCC Very Large Crude Carrier
VMLSS Volatile Mixed Liquor Suspended Solids
W
WABT Weighted Average Bed Temperature
WHB Waste Heat Boiler
WHSV Weight Hourly Space Velocity
WOSL Wiri Oil Services Ltd
Y
YP Yard Pipe

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 94
Printed Date: 9 July 2008
Operators Dictionary

27 REFINERY THROUGHPUT 1989 AND 1998

PRIMARY FEEDSTOCKS SOURCE 1989 1997


,000 Tonnes ,000 Tonnes
Condensate Arun: Indonesia 331
Kapuni Taranaki 277 152
Maui Taranaki 459 414
Low Sulphur Fletcher Blend Taranaki 359 169
Barrow Is Australia 228
Miri Light Malaysia 148
Thevenard Australia 278
High sulphur Arab Heavy Gulf States 410 327
Arab Light Gulf States 1129 594
Arab X Light Gulf States 259
Murban Gulf States 595 166

OCCASIONAL FEEDSTOCK
Condensate: Cooper Basin Australia 40
North West Shelf Australia 24
Low Sulphur: Airlie Australia 61
Belida Indonesia 111
Champion Brunei 165
Challis Australia 86
Cooper Basin Australia 94
Cossack Australia 107
G.O/F.O Slops 8
Gippsland Australia 1
Labuan Malaysia 61
Maui F Sands Taranaki 203
Tapis Malaysia 78
Varanus Australia 90
Walio Indonesia 26
High Sulphur: Arab Medium Gulf States 58
Dubai Gulf States 69 355
Khafji Gulf States 102
Lower Zakum Gulf States 29 37
Oman Gulf States 232
Upper Zakum Gulf States 44

ADDITIONAL INTAKES
Syngas 439 4
Imported Residue for CDU/ HVU2 87 352
Imported Mogas Component 16 282
Imported Light Cycle Oil 7
Imported Fuel Oil 2
Total 4576 4989

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 95
Printed Date: 9 July 2008
Operators Dictionary
FINISHED PRODUCTS

Mogas Premium 1424 388


Mogas Regula 229 1152
Premium Kero 4 5
Jet A1/ D.P.K. 761 825
G.O 1364 1614
Fuel Oils 340 512
Bitumen 129 139
Sulphur 17 23
Fuel and loss 308 331
Total 4576 4989

Other Feedstocks occasionally imported are


Chinese SHENGLI and Indonesian TAPIS.

N.B. Figures are rounded- hence slight imbalance.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 96
Printed Date: 9 July 2008
Operators Dictionary
28 REFINERY STATISTICS

Unit Name Capacity t/day Product

Block A
CD1 8,500 Crude Oil
Naphtha Hydrotreater 4,600 Naphtha
Gas Oil desulphuriser 900 Gas Oil
Platformer 3,300 Platformate
HVU1 (Bitumen Unit) 1,100 Bitumen

Block B
CD2 5,500 Crude Oil
Kero hydrodesulphuriser 1,600 Kerosene
Sulphur Recovery Units 1-3. 55 max Liquid Sulphur

Block C1
Hydrocracker 4,200 Waxy Dist/ DAO
HCU Fractionator 1,200 Cracked Products
Tops Treater 240? Cracked Tops

Block C2
HVU2 (High Vacuum Unit) 5,600 Long Residue
Butane Deasphalt Unit 1,900 Short Residue
Hydrogen Manufacturing Unit 170 Hydrogen

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 97
Printed Date: 9 July 2008
Operators Dictionary
Utilities contains all the "non- manufacturing" functions such as steam and air generation, water supply, effluent disposal etc.

Typical flows include: 2,000 HP Steam


5,500 Cooling Water
2,200 Treated Effluent

Oil Movements contains all the tankage and interconnecting pipework, including the Refinery to Auckland Pipeline (RAP).

Some movements * Total of 93 tanks (including Spheres)


Statistics * Largest tank is T13 at 85,000 tonnes capacity

RAP statistics * 169 kilometres of 273 mm o/d pipe with seven emergency valve sites along it.
* Handles around 255 cubic metres/ hour which
equals approximately 5018 t/ day depending on product density.
* Carries Premium and Regular Mogas, AGO and Jet-A1.
* Volume of pipeline is 9100 cubic metres
(9 100 000 litres).
* Typical journey time is 36 hours.

Shipping Statistics * Average of 3 large crude carriers, 12 coastal


tankers and 1 export ships per month.
* Largest ship that can be accommodated on the jetty
is a craft of 150,000 DWT.
* Largest cargo that can be handled is 120,000 tonne.
* Maximum ships discharge rate is 6,000 t/hr,
however, a typical average discharge rate is 84,000
t/day which takes about 30 hours to unload a typical cargo.

Site Size * 160 Hectares.

Doc No: Error! Reference source not found. Issue Date: Error! Reference source not
found. Page 98
Printed Date: 9 July 2008

Vous aimerez peut-être aussi