Académique Documents
Professionnel Documents
Culture Documents
I-V Curve
2.5
160 140
Pmax %
120 100 80
1.5
Current [A]
60 40
Factory binning Open circuit voltage Short circuit current Voltage at maximum power Current at maximum power
0.5
20 0
30
60
Voltage [V]
90
120
SF140-L
SF145-L
SF150-L
SF155-L
Standard Test Conditions (STC): 1,000 W/m2 irradiance, module temperature 25 C (77 F), air mass 1.5. Isc and Voc are 10% tolerance of STC rated values. Module output may rise after light soaking due to its unique characteristics. NOCT Characteristics
RoHS compliant
SF140-L Maximum power Open circuit voltage Short circuit current Voltage at maximum power Current at maximum power Pmax Voc Isc Vmpp Impp 102 W 97.8 V 1.66 A 72.7 V 1.41 A
Module Drawing
Front view 49.50.08
Nominal Operating Cell Temperature Conditions: Module operating temperature at 800 W/m2 irradiance, air temperature 20 C (68 F), wind speed 1 m/s and open circuit condition.
38.50.08
Performance at Low Irradiance Efficiency reduction of maximum power from an irradiance of 1,000 W/m2 to 200 W/m2 at 25 C (77 F) is typically 3.0%. The standard deviation for the reduction of efficiency is 2.6%. Temperature Characteristics
Back view 17.9 17.9 14.6 14.6 2 X 0.15 2XGrounding 4 X 0.33 Mountingholes 8 X 0.26 Mountingholes
NOCT
8.9 1.2
0.04
1.2
0.04
8.9
Temperature coefficient of Isc Temperature coefficient of Voc Temperature coefficient of Pmax Mechanical Characteristics Dimensions (L x W x H) Weight Application class (IEC 61730) Fire rating (IEC 61730)
(21.6)
23.50.2
36.80.08
0.85
2.5
() (+) 47.253.9
1,257 x 977 x 35 mm (49.5 x 38.5 x 1.4 in.) 20 kg (44.1 lbs) A Class C II 2,400 Pa (IEC 61646) / 1,600 Pa design load (UL 1703) CIS glass substrate (cadmium free) Clear tempered glass, 3.2 mm EVA Weatherproof plastic film (color: black & silver) Anodized aluminum alloy (color: black) Butyl rubber Protection rating: IP 67 (with bypass diode) Silicone 2.5 mm2 /14 AWG (halogen free) 1,200 mm (47.2 in.) 25 panels/pallet 36 pallets/40 container (900 panels)
4.7
0.85
18.30.2 0.5 Transverse cross section detail 1.2 Longitudinal cross section detail 1.2 1.4 0.47 1.4
Safety class (IEC 61140) Snow/wind load* Cell type Front cover Encapsulant Back sheet Frame Edge sealant Junction box Adhesive Output cables (conductor) Cable lengths (symmetrical) Packing information
Contact Information Solar Frontier K.K. (HQ, Asian Sales Office) Tokyo, Japan Tel: +81-3-5531-5626 Solar Frontier Americas Santa Clara, CA, USA Tel: +1-408-916-4150 Solar Frontier Europe Munich, Germany Tel: +49-89-92-86-142-22 www.solar-frontier.com
* UL: 1.5 x design load is applied to the module, i.e. 2,400 Pa (50.1 lbs/ft2) is applied to meet the 1,600 Pa UL design load standard.
This preliminary data sheet is provided to assist you in evaluating this product that is under development. Solar Frontier K.K. reserves the right, at its sole discretion, to change, modify, add or delete portions of the content at any time without notice.
DS5-16-PGE81