Académique Documents
Professionnel Documents
Culture Documents
Version 2.5 December 2006 Produced by SAGEM DS Sige social : 27, rue Leblanc 75512 PARIS CEDEX 12 FRANCE Customer Service : SAGEM Dfense Scurit SAV terminaux biomtriques Boulevard Lnine - BP428 76805 Saint Etienne du Rouvray FRANCE Tel : +33 2 35 64 55 05 Hotline : SAGEM Dfense Scurit Support terminaux biomtriques 24, Av du gros chne 95610 Eragny - FRANCE hotline.biometrics@sagem.com Tel : +33 1 58 11 39 19 https://www.sagem-ds.com/ biometrics-customersupport/ Copyright 2005 SAGEM DS http://www.sagem-ds.com/
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
1-1
Copyright notices
Information in this document is subject to change without notice and does no represent a commitment on the part of SAGEM Dfense Scurit. No part of this document may be reproduced or transmitted in any form or by any means electronic or mechanical, including photocopying or recording, for any purpose without the express written permission of SAGEM Dfense Scurit.
The software described in this document is supplied under a license agreement o nondisclosure agreement. It is against the law to copy the software on any medium except as specifically allowed in the agreement. This manual makes reference to names and products that are trademarks of thei respective owners. MORPHO is a registered trademark of SAGEM Dfense Scurit.
1-2
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
REVISION HISTORY
Revision Date 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 8 November 2002 15th November 2002 4th December 2002 17th January 2003 17th July 2003 10th October 2003 2nd March 2004 24th June 2004
th th
Document revision history Creation of the document Add chapter MSO100 Material Compatibility Add chapter Finger positioning Clarifications Add chapter MSO300 Precisions with the LEDS states MSO 300 S getting started Add information about Smart Card option Add MSO3xx suspend mode LEDs status
1.8
16 July 2004
th
SAGEM SA
1.9
14 December 2004
th
SAGEM SA
Update of hotline phone number Added the MSO xx1 products reference Add the "SAGEM MorphoSmart Service Provider Usb Server" installation in the USB driver installation for MSO3xx and CBM. Added installation procedure for Windows XP embedded. Minor form modifications Corrected performance description
2.3 2.4
SAGEM DS SAGEM DS
2.5
08 December 2006
SAGEM DS
FCC recommendations
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
1-3
1-4
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
TABLE OF CONTENTS
1 OVERVIEW.................................................................................................................................................. 1-7 1.1 1.2 1.3 2 WELCOME TO SAGEM MORPHOSMART ............................................................................................. 1-7 SAFETY INSTRUCTIONS .......................................................................................................................... 1-8 FINGER PLACEMENT RULES ................................................................................................................... 1-9
MORPHOSMARTTM MSO100 ................................................................................................................... 2-10 2.1 2.2 2.3 2.4 2.5 2.6 2.7 PHYSICAL CHARACTERISTICS ............................................................................................................... 2-10 INSTALLATION ...................................................................................................................................... 2-10 GENERAL DESCRIPTION........................................................................................................................ 2-11 MAN MACHINE INTERFACE ................................................................................................................... 2-12 GETTING STARTED ............................................................................................................................... 2-13 MORPHOSMARTTM MSO100 TECHNICAL CHARACTERISTICS ................................................................. 2-14 MORPHOSMARTTM MSO100 HARDWARE PLATFORM COMPATIBILITY ..................................................... 2-15
MORPHOSMARTTM MSO200 ................................................................................................................... 3-16 3.1 3.2 3.3 3.4 3.5 3.6 3.7 PHYSICAL CHARACTERISTICS ............................................................................................................... 3-16 SAFETY INSTRUCTIONS ........................................................................................................................ 3-16 INSTALLATION ...................................................................................................................................... 3-16 GENERAL DESCRIPTION ....................................................................................................................... 3-17 MAN MACHINE INTERFACE ................................................................................................................... 3-18 GETTING STARTED .............................................................................................................................. 3-19 MSO200 TECHNICAL CHARACTERISTICS .............................................................................................. 3-20
MORPHOSMARTTM MSO3XX .................................................................................................................. 4-21 4.1 4.2 4.3 4.4 4.4.1 4.4.2 4.4.3 4.5 4.6 4.7 PHYSICAL CHARACTERISTICS ............................................................................................................... 4-21 INSTALLATION ...................................................................................................................................... 4-22 GENERAL DESCRIPTION........................................................................................................................ 4-23 MAN MACHINE INTERFACE ................................................................................................................... 4-24 System status ............................................................................................................................... 4-24 Biometric request status ............................................................................................................... 4-25 Smart card request status............................................................................................................. 4-25 GETTING STARTED ............................................................................................................................... 4-26 MORPHOSMARTTM MSO3XX TECHNICAL CHARACTERISTICS .................................................................. 4-28 MORPHOSMARTTM MSO3XX HARDWARE PLATFORM COMPATIBILITY ..................................................... 4-29
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
1-5
SAGEM Dfense Scurit 5.1 5.2 6 MSO XX1 TERMINALS ......................................................................................................................... 5-30 SPECIFIC RECOMMENDATIONS .............................................................................................................. 5-30
THE MORPHOSMARTTM COMPACT BIOMETRIC MODULE................................................................. 6-31 6.1 6.2 6.3 6.4 6.4.1 6.4.2 6.5 6.6 PHYSICAL CHARACTERISTICS ............................................................................................................... 6-31 INSTALLATION ...................................................................................................................................... 6-31 GENERAL DESCRIPTION........................................................................................................................ 6-32 MAN MACHINE INTERFACE ................................................................................................................... 6-33 System status ............................................................................................................................... 6-33 Biometric request status ............................................................................................................... 6-33 GETTING STARTED ............................................................................................................................... 6-34 MORPHOSMARTTM CBM TECHNICAL CHARACTERISTICS........................................................................ 6-36
7 8
SECURE MORPHOSMART MSO3XX AND CBM GETTING STARTED............................................. 7-38 RECOMMENDATIONS ............................................................................................................................. 8-39
1-6
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
1 Overview
1.1 Welcome to SAGEM MorphoSmart
Congratulations for choosing the MorphoSmart Automatic Fingerprint Recognition Terminal. MorphoSmart provides an innovative and effective solution for applications using Fingerprint Verification or/and Identification. Among the many biometric sciences, the use of finger imaging has significant advantages. Each finger is a unique physical signature developed before birth and is preserved until death. The MorphoSmart terminal integrates SAGEM image processing and features matching algorithms (MorphoSoft and MorphoImaging). This technology is based on lessons learned during 18 years of experience in the field of biometric identification and the processing of literally millions of individual fingerprint identification records. We believe you will find the MorphoSmart fast, accurate, and easy to use as a biometric peripheral. The MorphoSmart offers the following advantages: High quality optical scanner, Software development suite (MorphoSoft) with MorphoSmart MSO100, Software development suite (MorphoSmart SDK) with MorphoSmart MSO200, MorphoSmart MSO300, MorphoSmart CBM and Secure MorphoSmart, Key Management System (MorphoSmart KMS) with Secure MorphoSmart, PC/SC Smart Card Reader (only available with MorphoSmart MSO350), Compact size for easy installation and integration into your available office space, Intuitive interface that is easy to use in both setup and operational modes. To ensure the most effective use of your SAGEM MorphoSmart, we recommend that you read this Installation Guide entirely.
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
1-7
1-8
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
Fingerprint Placement
Fingerprint Orientation
Fingerprint Inclination
Fingerprint Rotation
Other recommendations for acquiring a quality finger image: Fingers should neither be too moist nor extremely dry, Exert firm, but not excessive, finger pressure on the surface of the sensor, Once a finger is placed on the scanner keep the finger still until advised to move or remove the finger from the scanner.
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
1-9
2 MorphoSmartTM MSO100
2.2 Installation
Installing the MorphoSmartTM MSO100 is very simple. It requires only an available USB port on the PC. Set the MorphoSmartTM terminal on a flat clear surface where it will not be at risk of coming in contact with fluids.
2-10
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
USB Connector
Bottom view
Metallic housing
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
2-11
STATUS Suspend Stand By Image Acquisition Failure Maintenance State Unrecoverable Error USB Not Initialized /
LOWER LED Off Flashing Green Blinking Green 2 seconds in Red Blinking Red Red
UPPER LED Off Not used Not used Not used Blinking Red Red
NOTE: Both LEDs will be red up on successful power-up until the USB device is initialized.
2-12
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
Important Notice
MorphoSmart MSO USB devices are currently supported under Windows 2000 SP4, Windows XP Professional Edition SP2, and Windows Server 2003 Enterprise. You need to have administrator rights on your local computer when plugging the MorphoSmart MSO device for the first time. If you do not have an unused USB port you may need to purchase and install a self-powered USB hub in order to use your MorphoSmart USB device. For more information on the installation, please refer to the readmeMSO.chm help file at the MorphoKit CDROM root.
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
2-13
USB
USB 1.1
Power
5V, 500mA
Temperature range
Operating Storage +0C to 40C 20C to 70C
Humidity
Operating Storage 10% < RH < 80% non-condensing < 95%
Weight
300g
Dimensions
80 x 92 x 57mm
2-14
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
2-15
3 MorphoSmartTM MSO200
3.3 Installation
Installing MorphoSmart is a very simple process. It requires a suitable environment and connecting the necessary power and data cables. Position the MorphoSmart terminal on a flat clear surface where it will not be at risk of coming in contact with fluids. Connect the power supply connector to the socket on top of the RS232 connector. connector to the PC. NOTE: Only use the provided power supply. Connect the RS232
3-16
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
Bottom view
Stand Module process Product sticker Void sticker Metallic housing
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
3-17
On
Blinking Red
Not used
Off
Red
Red
3-18
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
Important Notice
The MorphoSmart MSO200 can be either connected with Windows platforms using dedicated DLLs or with any type of host using a simple protocol working over a RS.232 link. For more information on the RS232 protocol, please refer to the MorphoSmart Host System Interface specification. For more information on the MorphoSmart Software Development Kit, please refer to the MorphoSmart Programmer Guide. Both documents are installed with the MorphoSmart SDK setup.
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
3-19
Input / Output
RS232 up to 115 200 bps
Power
5V, 500mA
Temperature range
Operating Storage +0C to 40C 20C to 70C
Humidity
Operating Storage 10% < RH < 80% non-condensing < 95%
Weight
300g
Dimensions
80 x 92 x 57mm
3-20
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
4 MorphoSmartTM MSO3xx
4.1 Physical Characteristics
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
4-21
4.2 Installation
Installing the MorphoSmartTM MSO3xx is very simple. It requires only an available USB port on the PC. Set the MorphoSmartTM terminal on a flat clear surface where it will not be at risk of coming in contact with fluids.
4-22
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
USB Connector
Sensor
Bottom view
Metallic housing
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
4-23
Off
Red
Red
Table 3: MSO3xx system status NOTE: Both LEDs will be red upon successful power-up until the USB device is initialized.
4-24
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
On
Blinking Red
See Table 5
On Off Off
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
4-25
Note for Windows XP Embedded: If you are using Windows XP Embedded, the automatic installer based on MSI wont work, since MSI is not installed on this platform. You will need to make the installation in a manual way. First uncompress the .cab file situated in START / PROGRAMS / MorphoSmart SDK / PC / Drivers to another directory. Then, register the driver. To do this, simply plug a MSO device. In the new hardware dialog box, simply point to the directory where you uncompressed the .cab file. The next step is to register the service. Copy the service file Serv_SpUsb.exe from the uncompressed .cab directory to the C:\Windows\System32 directory. Execute the two following commands:
sc create MSO_SpUsb_Service binPath="C:\WINDOWS\System32\Serv_SpUsb.exe" type=own start=auto error=ignore DisplayName="SAGEM MorphoSmart Service Provider Usb Server" tag=no sc start MSO_SpUsb_Service ( equivalent to the command net start "SAGEM MorphoSmart Service Provider Usb Server" )
4-26
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
Important Notice
MorphoSmart MSO USB devices are currently supported under Windows 2000 SP4, Windows XP Professional Edition SP1 and Windows Server 2003 Enterprise. You need to have administrator rights on your local computer when plugging the MorphoSmart MSO device for the first time. If you do not have an unused USB port you may need to purchase and install a self-powered USB hub in order to use your MorphoSmart USB device.
For more information on the MorphoSmart Software Development Kit, please refer to the MorphoSmart Programmer Guide.
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
4-27
USB
USB 1.1
Smart Card
PC/SC ISO 7816 1-4
Power
5V, 500mA
Temperature range
Operating Storage +0C to 40C 20C to 70C
Humidity
Operating Storage 10% < RH < 80% non-condensing < 95%
Weight
300g
Dimensions
80 x 92 x 57mm
4-28
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
4-29
Designation MSO OEM XX1 MSO 201 MSO 301 MSO 351
5-30
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
6.2 Installation
Installing the MorphoSmartTM Compact Biometric Module (CBM) is very simple. It requires only an available USB port the PC. It can be interfaced also with a serial link (Open Collector). The series interface is composed of TX, RX and GND. Set the MorphoSmartTM CBM terminal on a flat clear surface where it will not be at risk of coming in contact with fluids.
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
6-31
U SB
sensor
Bottom view
Plastical housing
stand
6-32
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
On
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
6-33
Note for Windows XP Embedded: If you are using Windows XP Embedded, the automatic installer based on MSI wont work, since MSI is not installed on this platform. You will need to make the installation in a manual way. First uncompress the .cab file situated in START / PROGRAMS / MorphoSmart SDK / PC / Drivers to another directory. Then, register the driver. To do this, simply plug a MSO device. In the new hardware dialog box, simply point to the directory where you uncompressed the .cab file. The next step is to register the service. Copy the service file Serv_SpUsb.exe from the uncompressed .cab directory to the C:\Windows\System32 directory. Execute the two following commands:
sc create MSO_SpUsb_Service binPath="C:\WINDOWS\System32\Serv_SpUsb.exe" type=own start=auto error=ignore DisplayName="SAGEM MorphoSmart Service Provider Usb Server" tag=no sc start MSO_SpUsb_Service ( equivalent to the command net start "SAGEM MorphoSmart Service Provider Usb Server" )
6-34
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
Important Notice
MorphoSmart CBM USB devices are currently supported under Windows 2000 SP4, Windows XP Professional Edition SP2 and Windows Server 2003 Enterprise. You need to have administrator rights on your local computer when plugging the MorphoSmart CBM device for the first time. If you do not have an unused USB port you may need to purchase and install a self-powered USB hub in order to use your MorphoSmart USB device.
For more information on the MorphoSmart Software Development Kit, please refer to the MorphoSmart Programmer Guide.
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
6-35
USB
USB compliant
Serial Interface
The serial interface is composed of TX,RX and GND. The level will be of open collector type. The transmission is up to 115.200 bauds for a 1 meter maximum length. The product integrator will have to anticipate an interface with its product for a level adaptability
Power
3 V to 5.5V Standby mode: 500 A (Typical) System Idle: 50 mA (Typical) Full operating sensor on: 200mA (max) Boot time 0.8 second
Temperature range
Operating Storage 10C to 50C 20C to 70C
Humidity
Relative Humidity: 85% RH
6-36
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
Weight
20g
Dimensions
53.7 x 33.7 x 13.5mm
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
6-37
MSO 1
MORPHOSMART Key Management System (MKMS)
+
Key2
MSO i
MSO n Figure 1: MORPHOSMART S unlocking Insert the MKMS CD into your CDROM drive. If installation does not start automatically, run setup.exe from the root directory of the CD. After installation, start the DAO 3.6 driver installation from the PROGRAMS folders: START / PROGRAMS / MorphoSmartKeyManagementSystem / InstallDAO 3.6 /. After installation, start the MKMS application from the PROGRAMS folders: START / PROGRAMS / MorphoSmartKeyManagementSystem / Exe / Select the 'Root key generation' action in the 'Initialization' menu, to create your MORPHOSMART Certification Authority. Click Insert Transport Files button to import the two transport files and their passwords into the MKMS database (figure 1). Set up the value of the security configuration parameters and of the key parameters ('Initialization' menu). Then connect a new MORPHOSMART device to the PC, and use the 'MSO Personalization' button to unlock it, and to put it in operational condition. Perform the previous action for each new secure MORPHOSMART device of the batch.
MORPHOSMART For more information about the secure MorphoSmartKeyManagementSystem.pdf file from the PROGRAMS folders:
please
refer
to
the
7-38
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
8 Recommendations
Areas containing combustibles
It is strongly recommended that you do not install your SAGEM MorphoSmart in the vicinity of gas stations, petroleum processing facilities or any other facility containing flammable or combustible gasses or materials.
General precautions
Do not attempt to repair your SAGEM MorphoSmart yourself. The manufacturer cannot be held responsible for any damage/accident that may result from attempts to repair components. Any work carried out by non-authorized personnel will invalidate your warranty. Do not use your SAGEM MorphoSmart in damp areas (ex: swimming pools etc). It must be protected from water and other liquids. Do not expose your SAGEM MorphoSmart to extreme temperatures. Attempts to integrate the MorphoSmart with unapproved accessories will void your warranty. Due to electrostatic discharge, and depending on the environment, synthetic carpet should be avoided in areas where the SAGEM MorphoSmart has been installed.
Warning
The manufacturer cannot be held responsible if the above recommendations are not followed or if the SAGEM MorphoSmart is used incorrectly.
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited
8-39
9 FCC Standard
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: User changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Responsible Party: Sagem Morpho Inc, 1145 Broadway Plaza, Suite 200, Tacoma, Washington (USA), 98402, (800) 346-2674. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
9-40
Version 2.5 December 2006 Sagem Dfense Scurit Document - Reproduction and disclosure prohibited