Académique Documents
Professionnel Documents
Culture Documents
Polybutylene Terephthalate
Nan Ya Plastics Corporation
ides.com/prospector
Technical Data
1 of 3 Form No. TDS-21029-en
UL and the UL logo are trademarks of UL LLC 2013. All Rights Reserved.
UL IDES | 800-788-4668 or 307-742-9227 | www.ides.com.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the
accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are
validated with the material supplier.
Document Created: Sunday, June 09, 2013
Added to Prospector: November, 1995
Last Updated: 11/13/2003
General
Material Status Commercial: Active
UL Yellow Card
1
E235269-101139788
E130155-221863
E235269-101139791
Search for UL Yellow Card Nan Ya Plastics Corporation
Availability North America
Filler / Reinforcement Glass Fiber Reinforcement, 15% Filler by Weight
Features Flame Retardant
Appearance Colors Available
Forms Pellets
Processing Method Injection Molding
Physical Nominal Value Unit Test Method
Specific Gravity 1.54 g/cm ASTM D792
Melt Mass-Flow Rate (MFR) (250C/2.16 kg) 17 g/10 min ASTM D1238
Molding Shrinkage - Flow 0.40 to 1.4 % ASTM D955
Water Absorption (24 hr) 0.080 % ASTM D570
Mechanical Nominal Value Unit Test Method
Tensile Strength (Yield) 97.9 MPa ASTM D638
Tensile Elongation (Yield) 6.0 % ASTM D638
Flexural Modulus 5450 MPa ASTM D790
Flexural Strength (Yield) 142 MPa ASTM D790
Coefficient of Friction (vs. Metal - Static) 0.15 ASTM D1894
Impact Nominal Value Unit Test Method
Notched Izod Impact (23C, 3.18 mm) 53 J/m ASTM D256
Hardness Nominal Value Unit Test Method
Rockwell Hardness (R-Scale) 119 ASTM D785
Thermal Nominal Value Unit Test Method
Deflection Temperature Under Load ASTM D648
0.45 MPa, Unannealed 196 C
1.8 MPa, Unannealed 179 C
Melting Temperature 220 C
CLTE - Flow 0.000040 cm/cm/C ASTM D696
Specific Heat 1260 J/kg/C ASTM C351
RTI Elec UL 746
0.711 mm 130 C
3.15 mm 130 C
RTI Imp UL 746
0.711 mm 115 C
3.15 mm 120 C
RTI Str UL 746
0.711 mm 120 C
3.15 mm 125 C
Electrical Nominal Value Unit Test Method
Volume Resistivity 1.0E+15 ohmcm ASTM D257
Dielectric Strength 25 kV/mm ASTM D149
Dielectric Constant (3.18 mm, 1 MHz) 4.70 ASTM D150
Dissipation Factor (3.18 mm, 1 MHz) 0.020 ASTM D150
Arc Resistance (3.15 mm) 80.0 sec ASTM D495
Nan Ya PBT1400G3
Polybutylene Terephthalate
Nan Ya Plastics Corporation ides.com/prospector