Vous êtes sur la page 1sur 5

T-1 3/4 (5mm) RIGHT ANGLE LED INDICATOR

Part Number: WP1503CB/GD Green

Features
z Low power consumption. z Versatile mounting on P.C. board or panel. z T-1 3/4 diameter flangeless package. z Reliable and rugged. z Housing UL rating: 94V-0. z Housing material: type 66 nylon. z RoHS compliant.

Description
The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode.

Package Dimensions

Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

SPEC NO: DSAF2061 APPROVED: WYNEC

REV NO: V.5B CHECKED: Allen Liu

DATE: MAR/16/2013 DRAWN: Q.M.Chen

PAGE: 1 OF 5 ERP: 1102000580

Selection Guide
Part No. Dice Lens Type Iv (mcd) [2] @ 10mA Min. WP1503CB/GD Green (GaP) Green Diffused 15 Typ. 30 Viewing Angle [1] 21/2 60

Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.

Electrical / Optical Characteristics at TA=25C


Symbol peak D [1] 1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 565 568 30 15 2.2 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V

Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards.

Absolute Maximum Ratings at TA=25C


Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3]
Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base.

Green 62.5 25 140 5 -40C To +85C 260C For 3 Seconds 260C For 5 Seconds

Units mW mA mA V

SPEC NO: DSAF2061 APPROVED: WYNEC

REV NO: V.5B CHECKED: Allen Liu

DATE: MAR/16/2013 DRAWN: Q.M.Chen

PAGE: 2 OF 5 ERP: 1102000580

Green

WP1503CB/GD

SPEC NO: DSAF2061 APPROVED: WYNEC

REV NO: V.5B CHECKED: Allen Liu

DATE: MAR/16/2013 DRAWN: Q.M.Chen

PAGE: 3 OF 5 ERP: 1102000580

PACKING & LABEL SPECIFICATIONS

WP1503CB/GD

SPEC NO: DSAF2061 APPROVED: WYNEC

REV NO: V.5B CHECKED: Allen Liu

DATE: MAR/16/2013 DRAWN: Q.M.Chen

PAGE: 4 OF 5 ERP: 1102000580

All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAF2061 APPROVED: WYNEC REV NO: V.5B CHECKED: Allen Liu DATE: MAR/16/2013 DRAWN: Q.M.Chen PAGE: 5 OF 5 ERP: 1102000580

Vous aimerez peut-être aussi