Académique Documents
Professionnel Documents
Culture Documents
The Unterkofler construction company is operating the new The TT’s telescopic jib compensates for the slope of the ground,
27 TT on a difficult, steeply sloping site in the South Tyrolean without any risk of damage to trees located within the crane’s
town of Bolzano. slewing range. This task also illustrates the practical advantages
of the TT system’s resistance to wind effects.
Even the transport to this construction site was extremely difficult
since the 27 TT had to be manoeuvred along a narrow road lined If the construction site calls for crane slewing movement to be
with listed buildings and only 2.6 metres wide. restricted when out of use, the TT crane's tower and jib are re-
tracted, the slewing brake applied and the undercarriage locked
This project involves the conversion of an existing house and the to the slewing platform. Thus the crane cannot accidentally strike
construction of an underground garage with new living space. trees or the steeply rising ground surface on a site such as this.
With its unique telescoping tower and jib technology, the TT crane
has established a new performance standard in its size category.
This crane has also decisive advantages in transportation, erection
and ballasting.
Only one person is needed to make the TT crane ready for use
within 30 minutes of its arrival on the construction site. Revolu-
tionary ballasting is aided by the erection and hoist winches,
a semi-automatic ballasting grab and a novel method of ballast
centring.
27 TT – technical data:
Load capacity at jib end 1100 kg Load moment 27–45 mt
Max. load capacity 3000 kg On-road length 15.3 m
Hook heights 13 m / 18 m / 22 m Slewing radius 2.25 m / 2.5 m
20° steep-angle hook heights 19 m / 24 m / 28 m Distance between spindles 4.0 m x 4.0 m
Please contact
Liebherr-Werk Biberach GmbH, Postfach 16 63, D-88396 Biberach an der Riss
콯 +49 73 51 41- 0, Telefax: +49 73 51 41- 22 25, www.liebherr.com, E-Mail: info@lbc.liebherr.com