Vous êtes sur la page 1sur 4

Cisco certification ensures high standards of technical expertise.

You will develop a complete understanding of Wide Area Networking and how different network topologies work together to form a network. This is beneficial to every networking job and is the reason Cisco certification is in such high demand, even at companies with few Cisco devices. The CCNA certification is the first in the new line of Cisco certifications and is a precursor to all current Cisco certifications CCNA- CISCO CERTIFIED NETWORK ASSOCIATE Course Content: 1. Layered Models

OSI Reference Mode. Application Layer, Presentation Layer. Session Layer, Transport Layer. Network Layer, Data link Layer, Physical Layer .

2. TCP/IP

Introduction to TCP/IP. Transport Layer Protocols (TCP, UDP). Internet Layer Protocols

3. IP Addressing

IP Addressing Classes. Subnet Masks and Sub netting. Super netting. Determining Broadcast & Network Address

4. Configuring a Router

Booting a Router and setup mode. The Command-line Interface. Passwords and Line Console Commands. Interface Configuration setting. Verifying & Debugging the Configuration.

5. Building a Network

Configuring a Router and Switch. Verifying Configuration and Duplex Settings Continued Router Configuration. Continued Switch Configuration

6. Managing CISCO in an Internetwork


Backing up and restoring startup configuration and IOS. Booting IOS from TFTP Server. Cisco Discovery Protocol. Ping and Trace. Understanding configuration register. Recovering the password.

7. IP Routing

Routing Basics. Managing static and Dynamic Routes. Configuring static IP Routing. Configuring Dynamic IP routing using RIP, IGRP. Managing and configuring OSPF & EIGRP. Avoiding routing loops using split horizon, route poisoning.

8. Switching

Working concept of Switch. Spanning Tree Protocol (STP).

9. Virtual LANs

VLAN membership. VLAN Configuration and VTP. Assigning Ports. ISL Routing and Frame tagging.

Perform LAN and VLAN troubleshooting.

10. Access Lists


Access Lists Commands. Standard IP Access List. Wildcard Cards Implementing an Access List. Extended Access Lists. Securing a Network Site with Access list.

11. WAN

WAN Connection Types ISDN, X.25, Leased line and Frame-Relay. Connection protocols. HDLC, PPP AND PPMP. Dial-on-Demand Routing. Frame Relay configuration. Subinterfaces in Frame-Relay. Troubleshooting and Debugging Tools.

Course Duration 40 Hours Full Time 5 Days, 8 Hours

Part Time 20 Days, 2 Hours.

CCNA Prerequisites No prerequisite.

CCNA Exams & Required Exam(s) 640-802 CCNA

Recommended Training Recommended Training Interconnecting Cisco Networking Devices Part 1 (ICND1) Interconnecting Cisco Networking Devices Part 2 (ICND2)

Exam Cost 295$

Vous aimerez peut-être aussi