Académique Documents
Professionnel Documents
Culture Documents
USER GUIDE
Aim Srl. Via Cavalcanti, 8 20063 Cernusco S/N (MI) Italia Tel. (+39) 02.9290571 Fax (+39) 02.92118024 Made in Italy www.aim-sportline.com
Thank You.
MXL Dash
04 08 12 14 18
We would like to thank you for having choosen our MXLDash, which we believe be the successful completion of the acquisition EVO4 data. It will be useful in checking all possible parameters of your sport vehicle, on tracks where you will race, and will give you valuable information about lap times, predictive lap time, about satellites status in the EVO4 GPS receiver. Please, don't forget to periodically check www.aim-sportline.com you will find, as always, continuous updates firmware of your system and software for data analysis.
GETTING STARTED
INSTALLATION AND CONNECTION MXL DASH CONFIGURATION OF MXLDASH BUTTONS AND FIELDS DATA SHEET
02
03
GETTING STARTED
04
GETTING STARTED
MXL Dash
Gear Flashes
Remotable Connector
Diplay
Menu Pushbutton
Scroll Pushbutton
Mem Pushbutton
View Pushbutton
06
07
CHAPTER 1
MXL DASH
EVO4
Beacon
GPS Input
Speed 1-2
Connection is via CAN cable, that you find in the kit: just plug the connector into the EXP EVO4 port.
GPS Antenna
Status EVO4
08
09
CHAPTER 1
MXL DASH
Please, check the firmware version of your EVO4: connect it to PC via USB cable, run the program Aim RaceStudio2 and press Device Info pushbutton. (1)
If the firmware is not adequate: Enter into www.aim-sportline.com Enter into Download Area Section Select Firmware
1
Download EVO4 Firmup to your PC. (2)
Finally, run it and at the end of operations, check that everything is correct.
10
11
CHAPTER 2
MXL DASH
n ATTENTION! The RPM scale is configurable: the end of scale depends upon the EVO4 configuration.
By pressing "Transmit" pushbutton all configuration parameters are sent to EVO4 MXLDash.
12
13
CHAPTER 3
MXL DASH
When you turn MXLDash on, the bottom row shows a message about the status of the satellites: Using the MENU key you enter into the local configuration menu, it is possible:
n Total Running Show and clear the internal timer that is automatically incremented when the engine is turned on. Press OK to reset the counter.
n Set Time: 24H / 12H Determine whether the current time is shown in European format (00:24) and American (12:12 am 0:12 pm) Press OK to change the time format.
n SN 12234 FW 52.02.01 The last page shows information about yor MXLDash: Serial Number and Firmware version of system.
n Set GPS Marker Set the finish line point for the EVO4 GPS. Press OK to set the actual point as finish line.
14
15
CHAPTER 3
MXL DASH
The VIEW button let you change the data shown on the display, you can select: n RPM n Speed n Battery Level n Time and date n Odometer n Actual rolling lap time n Predictive lap time n Previous lap time
The MEM pushbutton is used, after the test, to see the most important data: n Lap number n Lap time n Maximum RPM and speed
Mem Pushbutton
View Pushbutton
16
17
CHAPTER 4
MXL DASH
MXL Dash
n Aluminium body n Grey back light n 6 alarm leds n 10 configurable gear flashes n Dimensions: 179 x 91 x 26 mm n Weight: 500 g
Our web site aim-sportline.com is constantly updated. We try to share with you our experiences about our products and how to use them in the tracks all over the world. n 4 Pins binder 712 female connector (solder view) Please, constantly check it and download the last versions of the firmware of your products.
18
19