Académique Documents
Professionnel Documents
Culture Documents
WWW.MARQUARDT-sWITCHEs.COM
WWW.MARQUARDT-SWITCHES.COM
APPROVaL MaRKS ENEC UL (USA) CSA (Canada) TERMINaL SYMBOLS Quick-connect terminal Solder terminal Short solder terminal PCB terminal PCB terminal angled left PCB terminal angled right Socket terminal ACtUatOR SYMBOLS Straight lever Lever simulated roller Lever with roller Differential lever Spring lever Spring lever bent Spring lever with molded cam Lever with adjusting screw ABBREVIatIONS tECHNICaL DRaWING ad AN BL FH FI FP FX ju MC MF MP OFF off-range OG ON Adjustable Anode Block Fixing hole, locating hole xing pin Fields for function indicator Free position Fixing pin Adjusted Marking cathode Mounting frame Measuring point Off Zero position Operating range On OP OP NC OP NO OR RC RL SH SL SP ST SW TH tk to TP Operating position Operating positions normally closed contact Operating positions normally open contact On request Recommended cut-out Reference level Shap-in hole Symbol limit Solder pads Slide travel Switching position Terminal hole Thick Top Permissible total travel position Lever simulated roller with adjusting screw Lever with adjusting screw and roller Lever with cams Housing cams Pushbutton Rotary shaft Standard actuator Mushroom-shaped actuator Cable Terminal strip Push-in terminal Snap-in terminal Cut terminal Screw terminal VDE UL (USA + Canada) CSA (Canada + USA)
SWItCHING FREQUENCY (aBBREVIatIONS) e.g. 5E4 switching cycles 50 000 switching cycles
CONTENT
ROCKEr SWITCHEs
MARQUARDT
Because cutting-edge technology is based on knowledge and ingenuity 2 Because product variety allows tailor-made designs 3 Pushbutton switches
Series 1680 - Single and double-pole pushbutton switches Series 1683 - Single and double-pole pushbutton switches Series 1691 - Smallest single-pole pushbutton switches Series 1247 - Double-pole pushbutton switches Series 5000 - Round pushbutton switches Series 1846 - Single-pole pushbutton switches Series 1840 - Single and double-pole pushbutton switches Series 1660 - Single and double-pole pushbutton switches Series 1670 - Single and double-pole pushbutton switches
95
98 105 109 110 112 114 116 120 124
TECHNICAL INFORmATION
General technical information
About the catalog Code of Conduct Approval marks CE mark / Declaration of installation RoHS (Restriction of the Use of Certain Hazardous Substances) REACH (EG/1907/2006) Household Appliances Standard IEC/EN 60335 Rating for alternating current voltage (AC) Rating for direct current voltage (DC) Life endurance Gold-plated contacts Switching frequency Contact distance Proof tracking Inrush current Ambient temperature Ambient conditions Isolation characteristics Storage conditions Soldering conditions IP protection EMC (electromagnetic compatibility) Appliance safety law Terminal symbols Contact resistance Switching functions
4 4 4 5 5 5 5 5 5 5 6 6 6 6 6 6 6 7 7 7 8 8 8 8 8 9
Approvals 4
Toggle Switches
Series 0350 - Three-pole toggle switches Series 1810 - Single and double-pole toggle switches Series 1820 - Single and double-pole toggle switches Series 0100 - Single-pole toggle switches
129
132 135 139
TOGGLE SWITCHEs
131
Slide Switches
Series 4021 - Double and four-pole slide switches Series 1206 - Single-pole slide switches
141
147
SLIDE SWITCHEs
143
Rotary switches
Series 1703 - Powerful rotary switches
149
151
Foot switches
Series 2410 - Ergonomic foot switches Series 2420 - IP 65 / 67 protected foot switch
153
155 158
ROTArY SWITCHEs
161
163 165 173 171
Snap-action switches
Series 1055 - Subsubminiature snap-action switches IP 67 Series 1050 - Subminiature snap-action switches Series 1045 - Subminiature snap-action switch IP 67 Series 1080 - Miniature snap-action switches Series 1005 - Miniature snap-action switches Series 1040 - Rotary shaft snap-action switches Series 1010 - Open snap-action switches Series 1019 - Single-pole snap-action switches Series 1022 - Snap-action switches IP 67 Series 1117 - Snap-action switches Series 1115 - Single-pole pushbutton switches
175
178 189 197 201 209 211 215 218 220 222 183
10
10 10 10 10 10
Positions-forces-travels 10
Further information
Order numbers Customized solutions Stock versions / minimum order quantities Modications / catalog data Application note / liability
11
11 11 11 11 11
Micro-signal switches
Series 1065 - Micro-signal switches
225
227
Sensors 233
Series 2061 - Flow sensors Series 2066 - Analogue pressure sensors 235 237
13 15
18 21 36 38 42 45 48 50 56 70 75 77 83 94
ECO 241
Series 1550 ECO - Single-pole rocker switches Series 1086 ECO - Single-pole pushbutton switches 243 246
PushnDrive 249
Series 3450 PushnDrive Keyless-Go-System 251
INDEX
Part numbers 253
ECO
253
] 1
SENsOrs
MICrO-SIGNAL SWITCHEs
SNAP-ACTION SWITCHEs
FOOT SWITCHEs
PUsHBUTTON SWITCHEs
The Marquardt Group was established in 1925 and, in spite of becoming a Global Player, has remained an independent family enterprise. With its two business units Automotive and Switches, Sensors & Controls, the Marquardt Group with its 12 international locations, is present world-wide in all important markets with more than 6,000 employees in all. Every year, we invest more than seven percent of our turnover in research and development not to mention the use of modern development tools, simultaneous engineering and an efcient testing system. Moreover, our corporate culture offers ample scope for unfolding the inventive genius of our employees. As a result, new ideas come up time and again, which are materialized into marketable cutting-edge technologies.
Marquardt standard switches are used in a wide range of industrial and electrical applications. Factors such as reliability, safety, design, innovative solutions and cost-efciency are of utmost importance. Marquardt offers a very broad and technically sophisticated product portfolio based on many years of experience. Our standard switches are longlasting and preferred because of their high performance. For us, demanding customer requirements are a welcome challenge. You can order various switches by selecting them directly from our up-to-date online product catalog. Whether mains or signal voltage, manual or mechanical actuation, with or without lighting we help you to nd the right solution.
Building technology
Power tools
Leisure vehicles
Automobiles
] 3
PUSHNDRIVE
ECO
SENSORS
MICRO-SIGNAL SWITCHES
SNAp-ACTION SWITCHES
ROTARY SWITCHES
SLIdE SWITCHES
TOGGLE SWITCHES
Ofce communication
Industrial applications
PUSHBUTTON SWITCHES
ROCKER SWITCHES
PUSHBUTTON SWITCHES
AppROVALs
Almost all Marquardt switches have been tested in accordance with EN 61058-1 or IEC 61058-1 and designed for the application conditions specied therein unless specied otherwise. They carry the uniform European approval mark ENEC. The approvals for the USA and Canada are granted in accordance with UL 1054, on request also already in accordance with UL 61058 3rd ed. or CSA 61058. In the year 2015 all approvals according UL 1054 und CSA 22.2 No. 55 expire and will be replaced by the UL 61058. Marquardt started with the conversion and re-evaluation for a smooth process for our customers already. The end device approval requirements for the target market China changed by middle of 2010. Switches must not be CCC certied generally, but the freely CQC approval simplies the end device approval. CQC approvals are available for some standard switches. Please contact us for more details and support. Please see the catalog for the respective granted approvals. A list of the approved Marquardt products can be found on the web pages of the respective test bodies (e.g. VDE, KEMA, UL and CSA). We will provide the appropriate certicate on request.
ROTARY SWITCHES
SLIdE SWITCHES
TOGGLE SWITCHES
The order numbers of other versions and further information are available on request. Sample switches, approvals and installation drawings with tolerance data can be provided.
FOOT SWITCHES
The high quality amd durable switches from Marquardt are used in many different applications. We are constantly working on new developments and customized versions. Please ask for further information. The current Marquardt product program can be found in our online product catalog with lter functionality at www. marquardt-switches.com All the products in our entire delivery program have one common feature: The consistently high quality level which has made us the favorite supplier of leading manufacturers worldwide. We are certied according to the most up to date automotive quality norm ISO TS 16949:2002 as well as the ISO 9001 naturally. The ISO 9001 is integral part of the ISO TS 16949. The latest valid documents for it are downloadable from our webpage. Quality is a premium for us.
AppROVAL mARKs
7 ENEC
SNAp-ACTION SWITCHES
MICRO-SIGNAL SWITCHES
cULus CQC
Europe Germany USA Canada Canada with conrmation of the national US requirements USA with conrmation of the national Canadian requirements freely Chinese approval mark
SENSORS
Approval marks specied in the series overview are product-dependent. That means that the products are assignable in the tables based on the rating specications (black print Europe/ blue print North America). The exact assignment of the approval marks are specied on the customer drawing for each product. The drawings are available as download from the online product catalog at www.marquardt-switches.com
\ 4
PUSHNDRIVE
ECO
From July 1, 2006 no more new electrical and electronic products may be offered in the EU which do not comply with the RoHS directive. The use of lead, mercury, hexavalent chromium, cadmium and the ame inhibitors containing bromide PBB and PBDE is prohibited for the protection of man and the environment. Compliance with the legal regulations is a matter of principle for Marquardt. This means all necessary measures for the implementation of the RoHS guideline have been done already, including suppliers. In our products are no forbidden materials included restricted by RoHS (lead, cadmium, chrome (VI), mercury and polybrominated ame retardant) anymore. The exception is the integrated printed circuit board (PCB) of the product series 3230. As far as we know and based on the information available to us from our suppliers, the products presented in this catalog meet the requirements of the EU Directive 2011/65/EU (Edition 1.7.2011).
LIFE ENDURANCE
The mechanical life endurance is the number of possible switching cycles without electrical loading of the contacts whilst the electrical life endurance is determined with the permissible rated electrical power for the contacts. The lower the electrical load is, the closer the electrical life is to the mechanical life when using the switch in the appliance.
REACH stands for Registration, Evaluation, Authorization and Restriction of Chemicals. Marquardt is anxious to develop and produce all products in compliance with applicable regulations, including the REACH regulations. Please contact us for more information.
] 5
PUSHNDRIVE
ECO
SENSORS
REACH (EG/1907/2006)
MICRO-SIGNAL SWITCHES
SNAp-ACTION SWITCHES
FOOT SWITCHES
ROTARY SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKER SWITCHES
GOLD-pLATED CONTACTs
For applications with a rating of < 300 mW or < 12 V we recommend switches with gold-plated contacts, also for applications with rare actuation or in a sulfurous atmosphere or other corrosive environments. Minimum currents are not especially dened, but can be assumed in a range down to 1 mA.
PUSHBUTTON SWITCHES
SWITCHINg FREQUENCY
For switches which are expected to be actuated more than 2 000 times a year, the test bodies prescribe an electrical life endurance of > 50 000 switching cycles. The majority of our switches meets these requirements and is marked by the 5E4 symbol (50 000 switching cycles) as an additional specication in the rating data. Switches without specication of the switching cycles in the rating data are approved for a switching frequency of 10 000 cycles. These data refer to the load which is typical for and described in the IEC 61058-1 standard. For clear differing, e.g. slower or faster actuations, we will be glad to advise you!
SLIdE SWITCHES
TOGGLE SWITCHES
AmbIENT TEmpERATURE
The designation of the permissible ambient temperature with e.g. T 85 means that the switch can be used for a maximum ambient temperature of 85 C according to the test criteria of the European safety standards (EN 61058 or IEC 61058-1). The identication T85/55 indicates that the terminal side of the switch is suitable for an ambient temperature of 85 C, whilst the actuating part (e.g. rocker) is subject to the room temperature of 55 C demanded by the standard. Using the switches outside the permissible temperature range and in a very humid or corrosive atmosphere can impair the functional capability. For UL-approved switches, the ambient temperature is determined by the RTI (Relative Temperature Index) of the used materials. Generally, the permissible ambient temperature of polyamides is 65 C. Switches for higher ambient temperatures are available on request.
ROTARY SWITCHES
CONTACT DIsTANCE
The majority of our appliance switches and some of our snap-action switches have a contact distance which enables full disconnection from the mains. The opening distances are even more than 3 mm in most cases. Switches which are not suitable for full disconnection are marked with the symbol. The switch standard IEC 61058-1 demands a contact distance of > 1.5 mm, the Household Appliances Standard EN60335 < 3 mm depending on the application for full mains disconnection. In switch variants with < 3 mm the test bodies usually acknowledge the mains plug or a disconnection device in the installation as a disconnection from the mains. Ask your test body if in doubt.
SNAp-ACTION SWITCHES
FOOT SWITCHES
MICRO-SIGNAL SWITCHES
PROOF TRACKINg
The proof tracking (PTI/CTI value) indicates at what voltage the proof tracking test is passed. The tracking distance is the shortest distance along the surface of the insulating material between two conductive parts. The values specied in the catalogue correspond to the division according to EN 61058-1 or IEC 61058-1.
AmbIENT CONDITIONs
The ambient conditions must be considered for the individual application completely. For our switch the use of vapors, glue, silicon etc. should be avoided, because it can change the contact resistance negatively. Aggressive liquids, salts and strong durable UV light can inuence or damage the surfaces.
\ 6
PUSHNDRIVE
ECO
SENSORS
IsOLATION CHARACTERIsTICs
Devices have to be developed and constructed in a way that they work safely for conventional use. To work in a safe way an adequate isolation is needed in order to protect against the danger of current. The measurements of this insulation is based on a protection target which also has an adequate protection against electric shocks even if there is an facile fault. This includes a protection against direct and indirect contact. This target can be achieved by so called Basis Insulation and the connection of all metal parts, which can have dangerous touch voltage in case of failure, with the protective conductor of the passed conduct, of the building installation like they are made in appliances with protection class I. by Basis Insulation and additional insulation (double insulation) in appliances with protection class II Enforced insulation likewise in appliances with protection class II
STORAgE CONDITIONs
The delivered products must be stored in the original Marquardt packaging in a temperature range between 5 and 45 C and 30 to 75 % relative humidity. The storage time of 12 months may not be exceeded. Storage in different containers and different climates may impair the properties of the product. Products with solder terminals can be stored under the following conditions: Temperatures between 5 C and 40 C Mean relative humidity below 50 % (relative humidity max. 85 %) No condensation and sulfurous environments
We recommend to check the processing results of the solder terminals in case of different storage conditions or when exceeding a storage time of more than 6 months.
SOLDERINg CONDITIONs
1. Recommended handling instructions for leadfree hand soldering The basis for the solderability of the products in this catalog in the as-delivered state is DIN IEC 60068-2-20. We recommend: Soldering devices electronically controlled soldering station with the typical power consumption of 50 - 80 VA Solder ux-lled solder wire, ux type 1.2.2 Solder temperature 350 C 10 C (setting on the appliance) Soldering time 2 to 3 s Notes: No force may be applied to the switch terminals during soldering, otherwise the switch properties (operating position etc.) could be changed. Longer soldering times and multiple soldering can impair the mechanical properties of the solder point and adjacent areas. When using ux, make sure that no ux gets inside the switch via the terminals. In such cases, the switch may not be soldered upside down, i.e. with the terminals on top. In open switching systems the soldering fumes must be kept away from the switch by suitable means.
Most Marquardt switches are constructed for appliances with protection class II, which means that they can be used without additional safety measures for all other appliances independent from protection class (cf. DIN en 61058-1, Kap. 7.1.5.3.4 annotation). If there are deviant characteristics they are observed in the specication. The necessary testing voltage to appoint the electric strength in regard of the over voltage category II and a pollution degree II is dened in IEC 60664. Basis Insulation 1500 V Additional Insulation 1500 V Enforced Insulation 3000 V
Please consider the allowance for the current appliance standards of the application which include different allowances unlike this general rules.
] 7
PUSHNDRIVE
ECO
SENSORS
MICRO-SIGNAL SWITCHES
This means that the switches are tested and is proven that they are able to allow an adequate protection.
SNAp-ACTION SWITCHES
FOOT SWITCHES
ROTARY SWITCHES
SLIdE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
PUSHBUTTON SWITCHES
ROCKER SWITCHES
2.
ecommended handling instructions for leadR free wave soldering Soldering proles are published in DIN IEC 61760 which must be adapted to the respective modules and the production conditions.
TOGGLE SWITCHES
Typical and maximum values: duration 80 s typical at 110 C, Pre-heating max. 125 C Wave soldering duration 2 - 7 s at 235 C, Tmax. 245 C Gradient pre-heating max. 2 C/s Gradient cooling max. -4 C/s
TERmINAL sYmbOLs
Quick-connect terminal Solder terminal Short solder terminal PCB terminal PCB terminal angled to left PCB terminal angled to right Socket terminal Cable Terminal strip Push-in terminal Snap-in terminal Cut terminal Screw terminal
Tmax
SLIdE SWITCHES
soldering
ROTARY SWITCHES
pre-heating
cooling
FOOT SWITCHES
These notes are guidelines which must be adapted respectively to the concrete process.
CONTACT REsIsTANCE
The contact resistance is the electrical resistance which can be measured at the switch terminals with closed contacts. The data refers to unwired contacts in new condition with a typical measuring current of greater than 100 mA. For silver-based contact materials this value is below 100 m (measuring current 1 A at 12 V DC), for gold-based contact materials below 50 m.
IP pROTECTION
The IP protection according to DIN EN 61058-1 and IEC 60529 specied in our documents refers to the actuating side of the switch unless stated otherwise. The customer must provide the seal between the switch and customer appliance and test for leaks at this point.
SNAp-ACTION SWITCHES
\ 8
PUSHNDRIVE
ECO
SENSORS
MICRO-SIGNAL SWITCHES
SWITCHINg FUNCTIONs
] 9
PUSHNDRIVE
Changeover switch with OFF position in center (SPDT-Center OFF, DPDT-Center OFF)
Lamp
ECO
SENSORS
MICRO-SIGNAL SWITCHES
SNAp-ACTION SWITCHES
FOOT SWITCHES
ROTARY SWITCHES
SLIdE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKER SWITCHES
SWITCHINg RELIAbILITY
Best switching reliability is achieved with fully exploited the pretravel and overtravel so that these should be fully exploited in the concrete application. Another criterion is the contact force which depends on the operating force. Switches with high contact forces should be chosen if possible.
PUSHBUTTON SWITCHES
BOUNCE TImE
The bounce time is the time between the rst closing of the contacts (switch-on signal) and the last time the contact resistance drops below a given threshold value. The values are typically below 5 ms at typical actuation speeds of approximately 80 mm/s.
TOGGLE SWITCHES
Release position Point on the actuator travel at which the snap mechanism returns to its initial position. Force necessary on the actuator to Operating force move this from the free position over the operating position. Release force Force to which the operating force must be reduced for the snap mechanism to return to the initial position. Difference force Difference between operating force and release force. Total travel force Force necessary to keep the actuator in the permissible total travel position. Pretravel Distance between free position and operating position. Overtravel Distance between operating position and total travel position.
SLIdE SWITCHES
FOOT SWITCHES
ROTARY SWITCHES
SNAp-ACTION SWITCHES
s
overtravel
Return travel Distance between total travel position and release position. Distance between release position and Release travel free position. Difference travel Distance between operating position and release position. Total travel Total of pretravel and overtravel or return and release travel.
MICRO-SIGNAL SWITCHES
Normally open
max.
release travel
difference travel
The application conditions must be checked in advance for continuously actuated snap-action switches.
total travel
return travel
\ 10
PUSHNDRIVE
ECO
FURTHER INFORmATIOn
ROCKER SWITCHES
ORDER NUmbERs
The standard products in every series are shown in a table form with their most important technical characteristics and their 8-digit order numbers. The accessories have a 9-digit order number.
CUsTOmIZED sOLUTIONs
The series and products shown in this catalog are only an excerpt from the complete Marquardt product range. One of Marquardts strengths is the implementation of customer-specic requirements. This includes services such as cable assembly, extended or modied functions, other colors, labelings and designs as well as the integration into complete modules and systems. The possibilities on request stated in the series must be examined individually. We offer you worldwide contacts for these services.
] 11
PUSHNDRIVE
ECO
SENSORS
MICRO-SIGNAL SWITCHES
SNAp-ACTION SWITCHES
FOOT SWITCHES
SLIdE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
www.marquardt-shop.com
ROCKER sWITCHEs
PUsHbUTTON sWITCHEs
TOggLE sWITCHEs
SLIDE sWITCHEs
ROTARY sWITCHEs
FOOT sWITCHEs
SNAp-ACTION sWITCHEs
MICRO-sIgNAL sWITCHEs
SENsORs
ECO
PUsHNDRIVE
] 13
PUsHNDrIVE
ECO
SENsOrs
MICrO-SIGNAL SWITCHEs
SNAP-ACTION SWITCHEs
FOOT SWITCHEs
ROTArY SWITCHEs
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
www.marquardt-shop.com
ROcKER SWITcHEs
ROCKEr SWITCHES
ROCKER sWITCHEs
PUsHbUTTON sWITCHEs
TOggLE sWITCHEs
SLIDE sWITCHEs
ROTARY sWITCHEs
FOOT sWITCHEs
SNAp-ACTION sWITCHEs
MICRO-sIgNAL sWITCHEs
sENsORs
ECO
PUsHNDRIVE
15 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROcKER SWITcHEs
ROCKEr SWITCHEs
SERIEs 1900
Smallest single-pole rocker switches to 6 (2) A 250 V AC
Appliance cut-out: 19.2 x 6.8 mm 23.2 x 6.8 mm 30.0 x 6.8 mm
PAgE 18 20
PUsHBUTTON SWITCHEs
SERIEs 1800
Single and double-pole rocker switches to 12 (4) A 250 V AC
Appliance cut-out: 19.2 x 12.9 mm 19.2 x 21.9 mm
SLIDE SWITCHEs
TOGGLE SWITCHEs
PAgE 21 35
SERIEs 1890
Single-pole rocker switches illuminated with LED to 6 A 24 V DC
Appliance cut-out: 19.2 x 12.9 mm
PAgE 36 37
FOOT sWITCHEs
ROTArY SWITCHEs
SERIEs 1881
Single-pole round rocker switches to 12 (4) A 250 V AC
Appliance cut-out: 20.3 mm 21.2 mm
PAgE 38 41
SNAP-ACTION sWITCHEs
SERIEs 1855
Miniature double-pole rocker switches to 4 (1) A 250 V AC
Appliance cut-out: 19.2 x 12.9 mm
PAgE 42 44
MICrO-sIGNAL sWITCHEs
SERIEs 1858
Miniature double-pole rocker switches to 10 (4) A 250 V AC 1E4
Appliance cut-out: 19.2 x 12.9 mm
PAgE 45 47
ECO
SENsOrs
SERIEs 1941
Single-pole rocker switches IP 50 to 12 (8) A 250 V AC 1E4
PAgE 48 49
\ 16
PUsHNDrIVE
ROcKER SWITcHEs
ROCKEr SWITCHES
SERIEs 1550
Single-pole rocker switches to 16 (4) A 250 V AC
Appliance cut-out: 26.2 x 12.4 mm 27.2 x 12.2 mm 28.6 x 14.0 mm
PAgE 50 55
SERIEs 1830
Single and double-pole rocker switches to 20 (4) A 250 V AC
Appliance cut-out: 30.0 x 11.0 mm 30.0 x 22.0 mm
SERIEs 1930
Double-pole rocker switches IP 65 to 20 (4) A 250 V AC
Appliance cut-out: 30.0 x 22.0 mm
PAgE 70 74
SERIEs 1656
Single-pole rocker switches to 10 A 250 V AC
Appliance cut-out: 28.0 x 13.0 mm
PAgE 75 76
SERIEs 3250
Single and double-pole rocker switches IP 66/IP 68 to 20 (10) A 12 and 24 V DC 1E5
PAgE 83 93
SERIEs 0344
Three-pole rocker switches to 16 (6) A 400 V AC
PAgE 94
17 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
SERIEs 3230
PAgE 77 82
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PAgE 56 69
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTArY SWITCHEs
PRODUCT FEATUREs
Reliable leaf spring contact system with contact spacing 3 mm Attractive, slim design Three sizes Low space requirement due to small sizes
ON REQUEsT
Other colors Other printing variants Cable assembly
FOOT sWITCHEs
Mechanical life endurance Operating force Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II
75E3 2-5N < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +85 C actuating side -20 C ... +55 C UL 94 V-2 850 C PA PA silver plated 80 N
7/1/4
\ 18
PUsHNDrIVE
ECO
SENsOrs
MICrO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
single-pole
ON / OFF switch (SPST) 1901.1102 1901.1103 1901.1106 1911.1102 1911.1104 1921.1101 1921.1102 1901.1152
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 3 3 3 3 3 3 3 3 Ag Ag Ag Ag Ag Ag Ag Au rocker marking silver
5.2
18.6
19 ]
PUSHNDRIVe
ECO
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
6.8
21 2
9.5
15.6
22.5
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
6.1
25 2
9.5
4.8-0.8
SLIDE SWITCHEs
FOOT sWITCHEs
ROTArY SWITCHEs
2 ... 3
7.6
31.5 9.5 2
4.8-0.8
SNAP-ACTION sWITCHEs
MICrO-sIGNAL sWITCHEs
\ 20
PUsHNDrIVE
ECO
SENsOrs
22.5
22.5
Inrush current (capacitive) Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II
50 A 70 A (contact pairing Ag / Ag, product-dependent) < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +100 C ... +85 C (product-dependent) actuating side -20 C ... +55 C UL 94 V-2 UL 94 V-0 (product-dependent) 850 C PA / PC PA silver plated / tinned / gold plated 80 N
7/1/4/
21 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
100 million times proven switching principle High, exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants
Other colors Other printing variants Other lamp variants Snap-on, customized actuators Cable assembly
ROTArY SWITCHES
PRODUCT FEATUREs
ON REQUEsT
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
1800.0102
1800.0108
1800.1102
1800.1104
1800.1108
1801.1121
1801.1148
1801.1520
1801.1908
1801.1926
1801.6122
1801.6130
1801.1101
1801.1102
4.8 50 3 Ag
single-pole
PUsHBUTTON sWITCHEs
Lighting voltage (V) Actuator color / printing Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4
230
230
230
230
TOGGLE SWITCHEs
230
SLIDE sWITCHEs
8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 mA 12 V DC 5E4 15 A 250 V AC 1 1/2 HP
ROTArY sWITCHEs
FOOT sWITCHEs
6 A 125 V AC 1/4 HP 6 A 125 - 250 V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN 60335 cap. 30 conform G
3 3 3 3 3 4.8 4.8 4.8 4.8 4.8
SNAP-ACTION sWITCHEs
4.8
4.8
4.8
MIKrO-SIGNALsCHALTEr
4.8
70
70
70
70
50
70
70
70
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
SENsOrs
PUsHNDrIVE
ECO
Miscellaneous
Stock version
snap-on rocker
sealing plate
sealing plate
Ag
\ 22
Ag
50
4.8
1801.1119
1801.1146
1801.1403
1801.2106
1801.2402
1801.2702
1801.5102
1801.6101
1801.6102
1801.6115
1801.1151
1801.1302
1801.1303
single-pole
1801.6222
Lighting voltage (V) Actuator color / printing Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (2) A 250 V AC 1E4 30 mA 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A 125 - 250 V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN 60335 cap. 30 conform G
4.8 4.8 4.8
Stock version
23 ]
PUSHNDrIVE
ECO
Miscellaneous
SENSOrS
MICrO-SIGNAL SWITCHES
50
50
50
50
50
50
50
50
50
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Au
Ag
Ag
Ag
SNAP-ACTION SWITCHES
4.8
4.8
FOOT SWITCHES
15 A 125 V AC 3/4 HP
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
1801.1202
1801.2202
1803.1102
1803.1121
1803.2102
1803.5102
1803.6102
1803.6152
1808.1101
1808.1102
1808.1103
1808.1112
4.8 <3 Ag
single-pole
Lighting voltage (V) Actuator color / printing Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4
8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 mA 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 15 A 125 V AC 3/4 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP
Changeover switch with OFF position in the center (SPDT - Center OFF)
TOGGLE SWITCHEs
PUsHBUTTON sWITCHEs
SLIDE sWITCHEs
ROTArY sWITCHEs
FOOT sWITCHEs
6 A 125 V AC 1/4 HP 6 A 125 - 250 V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN 60335 cap. 30 conform G
SNAP-ACTION sWITCHEs
4.8
4.8
4.8
4.8
MIKrO-SIGNALsCHALTEr
4.8
4.8
<3
<3
<3
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Au
SENsOrs
Ag
Ag
PUsHNDrIVE
ECO
Miscellaneous
Stock version
\ 24
Ag
<3
4.8
1808.1202
Terminal type
Stock version single-pole Changeover switch with OFF position in the center (SPDT - Center OFF)
4.8 4.8 4.8
Housing color
Miscellaneous
Contact material
30 mA 12 V DC 5E4
Terminal description
6 A 125 V AC 1/4 HP
6 A 250 V AC 1/2 HP
4 A 250 V AC 1/10 HP
6 A 125 V AC 1/10 HP
10 A 125 V AC 1/3 HP
10 A 250 V AC 1/2 HP
15 A 125 V AC 3/4 HP
15 A 250 V AC 1 1/2 HP
Ag
<3
1808.1302 1808.2102 1808.2302 1808.2704 1808.6102 1808.6103 1808.6202 1808.6302 1808.1152 1808.1353 Changeover switch (SPDT momentary)
PCB tinned
Ag
<3
Ag
<3
Ag
<3
Ag
<3
Ag
<3
Ag
<3
Ag
<3
Au
<3
Au
<3
4.8 4.8
Ag
Ag
TO 12 (4) A 250 V AC
Au
25 ]
PUSHNDrIVE
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
\ 26
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTArY sWITCHEs SLIDE sWITCHEs TOGGLE SWITCHEs PUsHBUTTON sWITCHEs ROCKEr SWITCHEs
PUsHNDrIVE
ECO
SENsOrs
MIKrO-SIGNALsCHALTEr
Terminal type
Housing color
Miscellaneous 1805.6102 1805.6108 1805.7104 1805.7109 1805.7110 1805.7112 1805.7118 1802.1121 1802.1123 1802.2504 1802.3311 1802.6123 1802.1101 1802.1102 1802.1108
Contact material
30 mA 12 V DC 5E4
Terminal description
6 A 125 V AC 1/4 HP
6 A 250 V AC 1/2 HP
4 A 250 V AC 1/10 HP
6 A 125 V AC 1/10 HP
10 A 125 V AC 1/3 HP
10 A 250 V AC 1/2 HP
15 A 125 V AC 3/4 HP
15 A 250 V AC 1 1/2 HP
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
shortened gate
Ag
Ag
Ag
Ag
TO 12 (4) A 250 V AC
Ag
1802.2102
1802.2104
1802.3102
1802.5103
1802.6152
1802.1221
1804.1102
1804.1125
1804.2102
1804.6121
1809.1102
double-pole
Changeover switch with OFF position in the center (DPDT - Center OFF)
1809.1202
Lighting voltage (V) Actuator color / printing Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 mA 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A 125 - 250 V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN 60335 cap. 30 conform G
50 50
1 mm longer 4.8
Stock version
27 ]
PUSHNDrIVE
ECO
Miscellaneous
SENSOrS
MICrO-SIGNAL SWITCHES
50
50
<3
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Au
Ag
Ag
Ag
<3
SNAP-ACTION SWITCHES
4.8 M3
4.8
4.8
4.8
4.8
FOOT SWITCHES
15 A 125 V AC 3/4 HP
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
Changeover switch with OFF position in the center (DPDT - Center OFF)
1809.1302
1809.2102
double-pole
Lighting voltage (V) Actuator color / printing Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 mA 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 15 A 125 V AC 3/4 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A 125 - 250 V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN 60335 cap. 30 conform G
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON sWITCHEs
FOOT sWITCHEs
ROTArY sWITCHEs
SNAP-ACTION sWITCHEs
MIKrO-SIGNALsCHALTEr
<3
<3
Ag
Ag
SENsOrs
PUsHNDrIVE
ECO
Miscellaneous
Stock version
\ 28
PCB tinned
Ag
1 mm longer 4.8
4.8
1804.1225
1806.1102
1806.6108
Combination
Changeover switch with OFF position in the center (SPDT - Center OFF)
1806.1602
Lighting voltage (V) Actuator color / printing Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 mA 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A 125 - 250 V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN 60335 cap. 30 conform G
4.8
Stock version
29 ]
PUSHNDrIVE
ECO
Miscellaneous
SENSOrS
MICrO-SIGNAL SWITCHES
Ag
Ag
Ag
<3
SNAP-ACTION SWITCHES
4.8
FOOT SWITCHES
15 A 125 V AC 3/4 HP
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
1806.1508
1807.1102
1807.1108
1807.1126
230 4.8 VDE
Lamp
PUsHBUTTON sWITCHEs
Lighting voltage (V) Actuator color / printing Housing color 12 (4) A 250 V AC 1E4 10 (4) A 250 V AC 1E4 8 (8) A 250 V AC 5E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4 4 (3) A 250 V AC 6E3 4 (2) A 250 V AC 1E4 30 mA 12 V DC 5E4 15 A 250 V AC 1 1/2 HP 15 A 125 V AC 3/4 HP 10 A 250 V AC 1/2 HP 10 A 125 V AC 1/3 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A 125 - 250 V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Inrush current (capacitive) (A) Contact distance (mm) Contact material EN 60335 cap. 30 conform G
230 230
230
230
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTArY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
4.8
4.8
4.8
SENsOrs
MIKrO-SIGNALsCHALTEr
PUsHNDrIVE
ECO
Miscellaneous
Stock version
\ 30
VDE
VDE
4.8
230
1807.6103
Lamp
21
15
21
5.3
15
12.5
19.5
6 20.5
21.6
7 18.6
13
7 18.5
13
21
9.8
5.3
15
7 18.6
13
19.8 -0.1
12.9 +0.1
21 13.3
17.8
5.3
21
15
7 18.6
13
7 18.6
21
15
3.5
13.2
0.8
31 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
2.6x1.6
16
FOOT SWITCHES
15
SLIDE SWITCHES
11.7
21.6
18
14.7
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
5.3
24 5.3 21 19.7
13.2
19.5
11.7 7 10.2 18.6 22 24 5.3 21 19.7 11.7 7 18.6 10.2 22 24 5.3 21 19.7 3.5 7.5 0.8 10.2 18.6 22
PUsHBUTTON SWITCHEs
7 18.6
10.2 22
TOGGLE SWITCHEs
SLIDE SWITCHEs
5.3
17.5
13.2
7 18.6
10.2 22
ROTArY SWITCHEs
2 ... 3
FOOT sWITCHEs
21
24
5.3
16
11.7
7 18.6 3.5
10.2 22
SNAP-ACTION sWITCHEs
10.3
21
24
5.3
MICrO-sIGNAL sWITCHEs
11.4 M3 18.6 22
6.2 18.6
4.8-0.8
\ 32
PUsHNDrIVE
ECO
SENsOrs
18
11.7
16
18
21
24
21
24
13.2
20.5
7 18.6
10.2 22
7.5 18.6
13.2
20.5
5.3
21
24
21
24
7 18.6
7 10.2 22 18.6
10.2 22
5.3
11.7
21
7 18.6
10.2 22
33 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
24
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
21.9 +0.1
SLIDE SWITCHES
TOGGLE SWITCHES
PCB terminal
3.5
0.8
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
21
15
PUsHBUTTON SWITCHEs
14 18.6
18
13
TOGGLE SWITCHEs
SLIDE SWITCHEs
FOOT sWITCHEs
ROTArY SWITCHEs
2 ... 3
21
24
11.7 22 13.2
17.5
14 18.6
SNAP-ACTION sWITCHEs
MICrO-sIGNAL sWITCHEs
\ 34
PUsHNDrIVE
ECO
SENsOrs
19.5
25
19
0.8 8
25
Transparent PVC-protection cap for double-pole switches of basic types 1802, 1804, 1805 and 1809. Serves as dust and water protection of the actuation side.
0.8 8
21
15
Dummy piece for size of basic type 1800, 1801, 1803, 1807, 1808, 1811, 1813, 1818, 1846, 1850 and 1858 made of PA with window and housing in black
11.2
18.6
13
35 ]
PUSHNDRIVe
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
Dummy piece for size of basic type 1802, 1804, 1805, 1806, 1807 and 1809 made of PA with window and housing in black
FOOT SWITCHES
ROTArY SWITCHES
28
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTArY SWITCHEs
PRODUCT FEATUREs
ON REQUEsT
Other colors Printing Other terminal types Variant for mains application
FOOT sWITCHEs
75E3 3N < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +100 C actuating side -20 C ... +55 C UL 94 (actuator: V-2, housing: V-0) 850 C PA PA silver plated 80 N
Operating force Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Suitable for appliances of protection class II
\ 36
PUsHNDrIVE
ECO
SENsOrs
MICrO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
single-pole
5.3
21 2
15
0.8 18.6 13
y 19.2 19.4
-0.1 -0.1
19.8 -0.1
Transparent PVC-protection cap. Serves as dust and water protection of the actuation side.
25
19
0.8 8
37 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
21.5
14.5
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTArY SWITCHEs
PRODUCT FEATUREs
Attractive round rocker switch High mechanical rating with at least 100 000 switching cycles Variants with IP 51 Low depth with 18.7 mm Appliance cut-out with 20 mm
ON REQUEsT
Other colors Other printing variants Other terminal variants (e.g. PCB) Cable assembly Gold-plated contacts for low voltages Other switching functions (e.g. 1888 - middle off) Painted variants
FOOT sWITCHEs
Mechanical life endurance Operating force Inrush current (capacitive) Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks
10E4 3N 70 A < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 and IP 51 (product-dependent) terminal side -20 C ... +100 C actuating side -20 C ... +55 C UL 94 V-2 UL 94 V-0 (product-dependent) 850 C PA PA silver plated 80 N
7/1/2/5
ECO
SENsOrs
MICrO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
\ 38
PUsHNDrIVE
single-pole
ON / OFF switch (SPST) 1881.1103 1881.1104 1881.1105 1881.1106 1881.1108 1881.1109 1881.1111 1881.1112 Normally open contact (SPNO) 1881.1209 Changeover switch (SPDT) 1883.1105 1883.1106
4.8 4.8 3 3 Ag Ag IP 40 IP 40 4.8 3 Ag IP 51
with swtiching system cover opening terminal 1b closed
3 3 3 3 3 3 3 3
Ag Ag Ag Ag Ag Ag Ag Ag
IP 40 IP 40 IP 40 IP 40 IP 51 IP 40 IP 40
with swtiching system cover
SLIDE SWITCHES
39 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
IP 51
ROTArY SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
3.5
15.4 2
11.6
11.7
19.7
18.7
PUsHBUTTON SWITCHEs
7 11.8 19.8
4.8
SLIDE SWITCHEs
FOOT sWITCHEs
ROTArY SWITCHEs
2 ... 3
15.4 2 11.7
18.7
7 18.6 23
SNAP-ACTION sWITCHEs
MICrO-sIGNAL sWITCHEs
\ 40
PUsHNDrIVE
ECO
SENsOrs
7.8
3.5
7.8
3.4
23
15.4
Transparent PVC - protection cap. Serves as dust and water protection of the actuation side.
24.5
www.marquardt-switches.com
41 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
11.2
18.2
4.2
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTArY SWITCHEs
PRODUCT FEATUREs
Illuminated rocker switches Different lamp variants Powerful with 50 000 mechanical switching cycles Caulked terminals for reliable plugging of the receptacles
ON REQUEsT
Other colors Other printing variants Other terminal types Other lamp variants Cable assembly
FOOT sWITCHEs
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II
5E4 < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +85 C actuating side -20 C ... +55 C UL 94 V-2 850 C PA PA silver plated 80 N
7/1/4
\ 42
PUsHNDrIVE
ECO
SENsOrs
MICrO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
1855.0102
1855.1122 Lighting voltage (V) Actuator color / printing Housing color 4 (1) A 250 V AC 1E4 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN 60335 cap. 30 conform G Stock version
1855.1118
1855.1115
1855.1108
1855.1104
1855.1102
1855.0108
43 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
ROCKEr SWITCHEs
15 21 2 10.3 21 2
15 10.3
14
5.3
21.5
5.3
PUsHBUTTON SWITCHEs
4.8 18.6
0.8 12.9
21.5
14 0.8
Solder terminal
SLIDE SWITCHEs
ROTArY SWITCHEs
2 ... 3
Transparent PVC-protection cap. Serves as dust and water protection for the actuating side.
25 19 0.8 8
FOOT sWITCHEs
\ 44
PUsHNDrIVE
ECO
SENsOrs
MICrO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
Operating force Inrush current (capacitive) Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II
5N 100 A < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +100 C actuating side -20 C ... +55 C UL 94 V-0 UL 94 V-2 (in the versions in white) 850 C PA PA silver plated 80 N
7/1/4
45 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
10E4
FOOT SWITCHES
Non-illuminated rocker switch Powerful with inrush currents (capacitive) up to 100 A Immediately self-extinguishing due to UL 94 V-0 material Conformant acc. to EN 60065 par. 14.6
ROTArY SWITCHES
PRODUCT FEATUREs
ON REQUEsT
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
\ 46
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTArY SWITCHEs SLIDE SWITCHEs TOGGLE SWITCHEs PUsHBUTTON SWITCHEs ROCKEr SWITCHEs
PUsHNDrIVE
ECO
SENsOrs
MICrO-sIGNAL sWITCHEs
1858.0103
1858.4205 10 (4) A 250 V AC 1E4 6 (4) A 250 V AC 5E4 12 A 250 V AC 1/2 HP 12 A 125 V AC 1/3 HP Terminal type Terminal description Contact distance (mm) Contact material EN 60335 cap. 30 conform G Miscellaneous Stock version
1858.4202
1858.2204
1858.2202
1858.1105
1858.1104
1858.1103
1858.1102
1858.0104
21 2
15
21 2
15
13
22
13 22
10.2 18.6
8.7 12.9
10.2 18.6
8.7 12.9
21 2
15
21 2 6
15
13
PCB terminal
21 2 6
10.2 18.6
3.5 12.9
19
0.8 8
47 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
Transparent PVC-protection cap. Serves as dust and water protection of the actuation side.
25
SNAP-ACTION SWITCHES
FOOT SWITCHES
13
18
ROTArY SWITCHES
SLIDE SWITCHES
13
20
18
TOGGLE SWITCHES
Solder terminal
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTArY SWITCHEs
PRODUCT FEATUREs
Single-pole rocker switch High dust protection with IP 50 100 million times proven switching principle Appliance cut-out same as basic type 1801
ON REQUEsT
Other colors Other printing variants Other terminal variants PVC - protection cap With approval mark
FOOT sWITCHEs
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing Plug force of the terminals Suitable for appliances of protection class II
1E5 5E4 (normally open contact) < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +100 C ... +125 C (product-dependent) actuating side -20 C ... +55 C UL 94 V-2 850 C PA PA / PA glass ber-reinforced 80 N
\ 48
PUsHNDrIVE
ECO
SENsOrs
MICrO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
single-pole
3 3 3
Ag Ag Ag
50 50 50
O at On-position
1941.1203
5.2
21
15
FOOT SWITCHES
12.9
Housing with internal meander and a hole underneath the snap-on mechanism for IP 50. Switching system is dust- and waterproof.
Sectional drawing
49 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
7 18.6
18.1
11.8
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTArY SWITCHEs
PRODUCT FEATUREs
Inrush currents (capacitive) up to 100 A Two housing variants (with ange or lower lying) With mechanical forced opening Illuminated window with lens effect
ON REQUEsT
Other colors Other rocker labelings Other lamp variants Conformity IEC 60065 chap. 14.6 Special rockers Cable assembly
FOOT sWITCHEs
Mechanical life endurance Inrush current (capacitive) Contact distance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing Plug force of the terminals Approval marks Suitable for appliances of protection class II
5E4 100 A 3 mm < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +100 C actuating side -20 C ... +55 C UL 94 V-2 UL 94 V-0 (product-dependent) 850 C PA PA 80 N
7/1/4/5
\ 50
PUsHNDrIVE
ECO
SENsOrs
MICrO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
1550.3102
1551.3202 1551.1303 1551.2654 1551.3106 1551.3103 1551.3102 1550.3609 single-pole ON / OFF switch (SPST)
230 12
1581.1303
1551.3702 Lighting voltage (V) Actuator color / printing Housing color 7 A 250 V AC 5E4
6.3 Ag lower lying ange Ag Ag 6.3 6.3 6.3 Ag increased life endurance at a high electrical rating Au approvals KEMA lower lying ange 6.3 6.3 6.3 6.3 6.3 Ag Ag Ag Ag Ag lower lying ange
16 (4) A 250 V AC 1E4 10 (4) A 250 V AC 5E4 10 (4) A 250 V AC 25E3 10 A 12 V DC 20 mA 250 V AC 5E4 20 A 250 V AC 2 HP 20 A 125 V AC 1 HP 16 A 250 V AC 2 HP 16 A 125 V AC 1 HP Terminal type Terminal description Contact material EN 60335 cap. 30 conform G
Miscellaneous
TO 16 (4) A 250 V AC
Stock version
51 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
10 A 12 V DC
PUsHBUTTON SWITCHEs
double-pole
TOGGLE SWITCHEs
SLIDE SWITCHEs
ROTArY SWITCHEs
FOOT sWITCHEs
1552.0102 1552.2601 1552.2602 1552.3102 1552.3104 1552.3112 1552.3117 1552.3602 1552.4602 1552.4702
SENsOrs
MICrO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
1552.4802
\ 52
PUsHNDrIVE
ECO
Terminal type
ROCKEr SWITCHEs
30 27 2 6.5
15 10
28.3
12 23.4
6 12
y 27.2 +-0.1
z 12.2 +0.2
17 10
28.3
12 23.4
6 12 14
y 28.6 +-0.1
z 14 +0.2
53 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
1555.8104 double-pole
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
13 4.5 10 5
29.5 23.7
13 10
12.8
23.2
24.8
21
12.8 6 12 15 10 17.8 6 12
PUsHBUTTON SWITCHEs
12 23.4
6 12
12 23.4
TOGGLE SWITCHEs
Basic types 1550 and 1555 lower lying ange single and double-pole
Solder terminal
SLIDE SWITCHEs
ROTArY SWITCHEs
26.4 -0.1
FOOT sWITCHEs
30 6.5 27 2
15 10 2
30 27 6.5
28.3
17.8
29.8
12 23.4 12
12 23.4
SNAP-ACTION sWITCHEs
Solder terminal
MICrO-sIGNAL sWITCHEs
y 27.2 +-0.1
z 12.2 +0.2
\ 54
PUsHNDrIVE
ECO
SENsOrs
29.8
26
24.8
13 4.5 10 5
29.5 23.7
13 10
12.8
23.3
24.8
3.5
12 23.4
1.3 6 12 12 23.4
0.8 6 12
13 4.5 10 5
29.5 23.7
12 23.4
6 12.3 3.5
12 23.4
26.8 -0.1
12.4 +0.1
30 27 2
15
23.4
12
55 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
17.8
29.8
FOOT SWITCHES
1.3x0.8
1.3x0.8
SLIDE SWITCHES
12.8
12.8
17
17
TOGGLE SWITCHES
Basic types 1551 and 1552 lower lying ange single and double-pole
PCB terminal
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTArY SWITCHEs
PRODUCT FEATUREs
100 million times proven switching principle mechanical life endurance up to 1 million switching cycles Large variety Variants with IP 67 or dust protection insert Two housing variants Actuating characteristic Illuminated and non-illuminated variants Approval for 400 V (product-dependent)
ON REQUEsT
Other colors Other rocker printings Other lamp variants Snap-on customized actuators Cable assembly
FOOT sWITCHEs
SNAP-ACTION sWITCHEs
10E4 5E4 (basic type 1839) 1E6 (product-dependent) 120 A / 50 A (contact pair Ag / Cu and basic type 1834) < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 / IP 67 (product-dependent) terminal side -20 C ... +105 C / ... +85 C / ... +100 C (product-dependent) actuating side -20 C ... +55 C UL 94 V-2 UL 94 V-0 (product-dependent) 850 C PA / PC (product-dependent) PA silver plated / tinned (product-dependent) 80 N
7/1/4/
Inrush current (capacitive) Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability
SENsOrs
MICrO-sIGNAL sWITCHEs
Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II
\ 56
PUsHNDrIVE
ECO
1830.3112
1830.3118
1830.0102
1831.0114
1831.3312
1831.3313
1831.3606
1831.3607
1831.3815
1831.3816
1831.3933
1831.8112
1831.3311
single-pole
1831.1107
Lighting voltage (V) Actuator color / printing Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 4 (2) A 250 V AC 1E4 30 mA 12 V DC 16 A 250 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A 125 - 250 V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN 60335 cap. 30 conform G 6 (4) A 250 V AC
Miscellaneous
Stock version
57 ]
PUSHNDrIVE
ECO
SENSOrS
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
MICrO-SIGNAL SWITCHES
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
4.8
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
230
230
230
\ 58
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTArY sWITCHEs SLIDE sWITCHEs TOGGLE SWITCHEs PUsHBUTTON sWITCHEs ROCKEr SWITCHEs
PUsHNDrIVE
ECO
SENsOrs
MIKrO-SIGNALsCHALTEr
10 A 12 V DC
Terminal type
Housing color
Miscellaneous
30 mA 12 V DC
6 (4) A 250 V AC
Contact material
20 (4) A 250 V AC
16 A 250 V AC 1 HP
Terminal description
6 A 125 V AC 1/4 HP
6 A 250 V AC 1/2 HP
4 A 250 V AC 1/10 HP
6 A 125 V AC 1/10 HP
16 A 125 V AC 1/4 HP
16 A 125 V AC 1/3 HP
16 A 250 V AC 1/2 HP
Ag
4.8
Ag
6.3
Ag
6.3
Au
4.8
Ag
6.3
1833.3312 1833.1102 1833.3307 Changeover switch with OFF position in the center (SPDT - Center OFF)
Ag
4.8
Ag
6.3
Ag
Ag
6.3
Ag
4.8
Ag
4.8
Ag
4.8
TO 20 (4) A 250 V AC
Ag
4.8
Changeover switch with OFF position in the center (SPDT - Center OFF)
1838.4307
1838.8302
1838.3402
1838.3502
1835.3902
1833.1202
single-pole
1833.3402
Lighting voltage (V) Actuator color / printing Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 6 (4) A 250 V AC 4 (2) A 250 V AC 1E4 30 mA 12 V DC 16 A 250 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A 125 - 250 V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN 60335 cap. 30 conform G
Miscellaneous
Stock version
59 ]
PUSHNDrIVE
ECO
SENSOrS
Ag
Ag
Ag
Ag
Ag
Ag
Ag
MICrO-SIGNAL SWITCHES
6.3
6.3
4.8
2.8
6.3
6.3
6.3
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
230
ROCKEr SWITCHEs
1835.3419
1835.3111
1835.3112
1835.3114
1835.3118
1835.9413
1835.3102
1835.3105
1835.3108
1835.3116
1835.3107
1832.1612
1832.3311
1832.3312
6.3 3 Ag
double-pole
PUsHBUTTON sWITCHEs
Lighting voltage (V) Actuator color / printing Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 6 (4) A 250 V AC 4 (2) A 250 V AC 1E4 30 mA 12 V DC 16 A 250 V AC 1 HP
115 230
400
230
230
230
230
230
230
230
230
TOGGLE SWITCHEs
12
SLIDE sWITCHEs
ROTArY sWITCHEs
FOOT sWITCHEs
16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A 125 - 250 V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN 60335 cap. 30 conform G
PCB holder 248.103.011 mounted lower lying ange 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 4.8 6.3 6.3 cover frame 33.2 long cover frame 33.2 long Ag 3
MIKrO-SIGNALsCHALTEr
SNAP-ACTION sWITCHEs
SENsOrs
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
ECO
Miscellaneous
PUsHNDrIVE
Stock version
\ 60
Ag
1832.3313
1832.3602
1832.6112
1832.7103
1832.8112
1832.9103
1832.0113
1832.1102
1832.3307
1832.9101
1832.3407
1835.3802
1834.3311
double-pole
1834.3312
Lighting voltage (V) Actuator color / printing Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 4 (2) A 250 V AC 1E4 30 mA 12 V DC 16 A 250 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A 125 - 250 V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN 60335 cap. 30 conform G
6.3 4.8 6.3
Miscellaneous
Stock version
61 ]
PUSHNDrIVE
ECO
SENSOrS
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
MICrO-SIGNAL SWITCHES
6.3
6.3
4.8
6.3
6.3
6.3
SNAP-ACTION SWITCHES
FOOT SWITCHES
6 (4) A 250 V AC
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
230
\ 62
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTArY sWITCHEs SLIDE sWITCHEs TOGGLE SWITCHEs PUsHBUTTON sWITCHEs ROCKEr SWITCHEs
PUsHNDrIVE
ECO
SENsOrs
MIKrO-SIGNALsCHALTEr
10 A 12 V DC
Terminal type
Housing color
30 mA 12 V DC
6 (4) A 250 V AC
Contact material
20 (4) A 250 V AC
16 A 250 V AC 1 HP
Terminal description
6 A 125 V AC 1/4 HP
6 A 250 V AC 1/2 HP
4 A 250 V AC 1/10 HP
6 A 125 V AC 1/10 HP
16 A 125 V AC 1/4 HP
16 A 125 V AC 1/3 HP
16 A 250 V AC 1/2 HP
Ag
4.8
Ag
6.3
Ag
6.3
Ag
6.3
Ag
4.8
Changeover switch with OFF position in the center (DPDT - Center OFF)
Ag
6.3
Ag
4.8
Ag
4.8
Ag
4.8
Ag
4.8
Ag
4.8
Ag
4.8
Ag
4.8
TO 20 (4) A 250 V AC
Ag
4.8
Changeover switch with OFF position in the center (DPDT - Center OFF)
1839.3402
1839.3502
1839.3503
1839.3602
1839.7304
1839.3352
1839.0105
double-pole
1834.3402
Lighting voltage (V) Actuator color / printing Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 6 (4) A 250 V AC 4 (2) A 250 V AC 1E4 30 mA 12 V DC 16 A 250 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A 125 - 250 V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN 60335 cap. 30 conform G
dust protection inlay momentary function one side lower lying ange
Miscellaneous
Stock version
63 ]
PUSHNDrIVE
ECO
SENSOrS
Ag
Ag
Ag
Ag
Ag
Au
Ag
Ag
MICrO-SIGNAL SWITCHES
6.3
6.3
6.3
6.3
6.3
6.3
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
1837.1118
1837.3102
1837.8102
230 6.3 size basic type 1835
Lamp
PUsHBUTTON sWITCHEs
Lighting voltage (V) Actuator color / printing Housing color 20 (4) A 250 V AC 1E4 20 (4) A 250 V AC 16 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 (4) A 250 V AC 1E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 6 (4) A 250 V AC 1E4 6 (4) A 250 V AC 4 (2) A 250 V AC 1E4 30 mA 12 V DC 16 A 250 V AC 1 HP 16 A 250 V AC 1/2 HP 16 A 125 V AC 1/3 HP 16 A 125 V AC 1/4 HP 6 A 250 V AC 1/2 HP 6 A 125 V AC 1/4 HP 6 A 125 - 250 V AC 1/8 HP 6 A 125 V AC 1/10 HP 4 A 250 V AC 1/10 HP Terminal type Terminal description Contact distance (mm) Contact material EN 60335 cap. 30 conform G
230
230
MIKrO-SIGNALsCHALTEr
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTArY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
4.8
6.3
SENsOrs
Miscellaneous
PUsHNDrIVE
Stock version
\ 64
ECO
6.3
230
1837.8108
Lamp
5.6
14
5.6
31.5
31.5
14
16.2
23.5
16.2
0.8
11 9.5
0.8
11
6.4
31.5
14
15.8
16.2
26.5
15
Quick-connect terminal 4.8 x 0.8 basic types 1830, 1831 and 1833
3
5.6
31.5
14
5.6
31.5
31.5
14
16.2
16.2
11
11
31.5
6.4
14
16.2
0.8 9.5
11
65 ]
PUSHNDRIVe
27.2
ECO
27
SENSOrS
MICrO-SIGNAL SWITCHES
27
SNAP-ACTION SWITCHES
6.4
FOOT SWITCHES
14
15.8
26.55
16.2
27
ROTArY SWITCHES
SLIDE SWITCHES
27
TOGGLE SWITCHES
Basic types 1830, 1831, 1833 and 1838 single-pole illuminated / non-illuminated
9.5 27.2
27.2
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
5.6
31.5 25
6.4
25
31.5
22.5
23.5
16.2
PUsHBUTTON SWITCHEs
9.5
9.5 27.2 22
10.2
TOGGLE SWITCHEs
Basic types 1832, 1834, 1835 and 1839 double-pole illuminated / non-illuminated
Quick-connect terminal 6.3 x 0.8 / 4.8 basic types 1832, 1834 and 1835
5.6
6.4
31.5
25
31.5
25
SLIDE SWITCHEs
16.2
y 30 -0.1 30.2
-0.1
z 22 +0.2 22
+0.2
9.5 27.2
0.8
9.5
10.2 22
ROTArY SWITCHEs
2 ... 3
30.6 -0.1
22 +0.2
29.5
5.6
FOOT sWITCHEs
16.2
5.6
31.5
25
31.5
25
29.5
0.8 TACT AND KEY sWITCHEs 9.5 27.2 0.8 9.5 10.2 22 10 10 22 10.2
27.2
SNAP-ACTION sWITCHEs
6.4
31.5
14
MICrO-sIGNAL sWITCHEs
16.2
11
Basic types 1830, 1831 and 1833 single-pole, lower lying ange illuminated / non-illuminated
SENsOrs
Quick-connect terminal 4.8 x 0.8 basic types 1830, 1831 and 1833
x
PUsHNDrIVE
\ 66
27
16.2
3.5
29.5
29.5
33.2 2
22.2 11.4 2
33.2
4.4
11.2
24.5
9.5 27.2
10.2 22
9.5 27.2 22
10.2
33.2
4.4
10.2
z 22 +0.2 22 +0.2 22
+0.2
9.5 27.2
1.3x0.8 4 22
10 27.2
0.8x0.8
10.2
1.3 +0.1 22
10
33.2 2
10 27.2
10.2 22
67 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
0.8x0.8
3.5
FOOT SWITCHES
4.4
ROTArY SWITCHES
SLIDE SWITCHES
11.2
15.5
13.5
TOGGLE SWITCHES
Basic types 1832, 1834, 1835 and 1839 double-pole, lower lying ange illuminated / non-illuminated
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
16.2
2.5
14
31.5 25.1
14
26
16.2 11 19 27.2 33.2 28.2 11.4 1.3 +0.1 7 0.8 3.5 20 27.2 11
PUsHBUTTON SWITCHEs
11 19 27.2
TOGGLE SWITCHEs
31.5
25
SLIDE SWITCHEs
16.2
29.5
ROTArY SWITCHEs
2 ... 3
FOOT sWITCHEs
10.6
5.4
Transparent PVC-protection cap for single-pole switches of basic types 1830, 1831, 1833 and 1838. Serves as dust and water protection of the actuation side.
11
37
SNAP-ACTION sWITCHEs
19.2
Transparent PVC-protection cap for double-pole switches of basic types 1832, 1834, 1835 and 1839 with frame length 33.2 mm. Serves as dust and water protection of the actuation side.
MICrO-sIGNAL sWITCHEs
0.6
SENsOrs
36
\ 68
PUsHNDrIVE
10.6
28
11.2
20
26
Housing 217.132.031
Housing and dummy cap must be assembled by the customer and make only sense in combination Dummy cap 203.146.051 Housing 217.127.491
Block connector for cable connection for the double-pole versions of the rocker switch series 1830 und 1930. Used with the standard timer plug AMP 0-927 936-1
69 ]
PUSHNDRIVe
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
Housing and dummy cap for double-pole size of basic types 1832, 1834, 1835 and 1839 made of PA black.
FOOT SWITCHES
ROTArY SWITCHES
Housing and dummy cap must be assembled by the customer and make only sense in combination
SLIDE SWITCHES
Housing and dummy cap for double-pole size of basic types 1830, 1831, 1833, 1837 and 1838 made of PA black.
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTArY SWITCHEs
PRODUCT FEATUREs
Illuminated and non-illuminated variants with various switching functions IP 65 with integrated gasket for high dust and water protection Inrush current (capacitive) up to 120 A Approval for 400 V 100 million times proven switching principle Modern rocker design High, exible variety
ON REQUEsT
Other switching functions (e.g. Changeover switch) Other terminal types Other colors Other printing variants Other lamp variants Cable assembly
FOOT sWITCHEs
5E4 3-8N 120 A 100 A (basic type 1939) 50 A (basic type 1934) < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 (terminal side), IP 65 (actuating side) terminal side -30 C ... +105 C actuating side -30 C ... +55 C UL 94 V-2 UL 94 V-0 (housing and socket only) 850 C PC / TPU (bellows) PA silver plated 80 N
7/1/5
SNAP-ACTION sWITCHEs
MICrO-sIGNAL sWITCHEs
Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature
SENsOrs
Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks
PUsHNDrIVE
ECO
\ 70
1935.3135
1935.3137
1935.3112
1935.3113
1935.3114
1935.3118
1935.3119
1935.3129
1935.3134
1935.3128
1935.3131
1935.3138
1932.1113
1932.3112
double-pole
1932.3113
Lighting voltage (V) Actuator color / printing Housing color 20 (4) A 250 V AC 1E4 12 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 16 A 250 V AC 1 HP 16 A 125 V AC 3/4 HP 16 A 125 V AC 1/3 HP 14 A 250 V AC 3/4 HP 14 A 250 V AC 1/2 HP 14 A 125 V AC 1/3 HP 14 A 125 V AC 1/4 HP 12 A 250 V AC 1 HP 12 A 125 V AC 1/2 HP Terminal type Terminal description Contact distance (mm) Contact material EN 60335 cap. 30 conform G
125 250
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Miscellaneous
bellows anthracite
Stock version
71 ]
PUSHNDrIVE
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
4.8
6.3
6.3
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
400
400
250
250
250
250
250
250
125
125
12
ROCKEr SWITCHEs
1932.3114
1932.3116
1932.3118
1932.3130
1932.3131
1932.3132
1932.3136
1932.3137
1932.3412
1932.3312
1932.3314
1935.3218
250 6.3 3 Ag
double-pole
PUsHBUTTON sWITCHEs
Lighting voltage (V) Actuator color / printing Housing color 20 (4) A 250 V AC 1E4 12 (4) A 250 V AC 1E4 10 (8) A 400 V AC 5E4 10 (8) A 250 V AC 5E4 10 A 12 V DC 6 (4) A 250 V AC 5E4 16 A 250 V AC 1 HP 16 A 125 V AC 3/4 HP 16 A 125 V AC 1/3 HP 14 A 250 V AC 3/4 HP 14 A 250 V AC 1/2 HP 14 A 125 V AC 1/3 HP 14 A 125 V AC 1/4 HP 12 A 250 V AC 1 HP 12 A 125 V AC 1/2 HP Terminal type Terminal description Contact distance (mm) Contact material EN 60335 cap. 30 conform G
6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3
ROTArY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
6.3
6.3
6.3
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
MIKrO-SIGNALsCHALTEr
Ag
SENsOrs
Miscellaneous
ECO
PUsHNDrIVE
Stock version
single-pole occupied
bellows white
bellows red
Ag
\ 72
Ag
6.3
1932.3413
10 A 12 V DC
Terminal type
Housing color
Miscellaneous 1934.3112 1934.3114 1934.2114 Changeover switch with OFF position in the center (DPDT - Center OFF)
Ag Ag Ag Ag Ag Au <3 <3 6.3 <3 6.3 <3 6.3 3 6.3 3 6.3
Contact material
12 A 250 V AC 1 HP
16 A 250 V AC 1 HP
Terminal description
12 A 125 V AC 1/2 HP
14 A 125 V AC 1/4 HP
14 A 125 V AC 1/3 HP
14 A 250 V AC 1/2 HP
14 A 250 V AC 3/4 HP
16 A 125 V AC 1/3 HP
16 A 125 V AC 3/4 HP
TO 20 (4) A 250 V AC
73 ]
PUSHNDrIVE
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
ROCKEr SWITCHEs
36.4 3
26.65
PUsHBUTTON SWITCHEs
.7
22
TOGGLE SWITCHEs
R3
R3 .7
y 30 -0.1 30.2
-0.1
z 22 +0.2 22
+0.2
22
ROTArY SWITCHEs
Quick-connect terminal 6.3 x 0.8 basic types 1932, 1934 and 1935
13.55 3
FOOT sWITCHEs
0.8x0.8 10.2
27.6
36.4
1.3+0.1
10.2
10
SNAP-ACTION sWITCHEs
MICrO-sIGNAL sWITCHEs
A correct assembly and examination on tightness according to IP 65 in the equipment must be ensured by the customer.
SENsOrs
Block connector for cable connection for the double-pole versions of the rocker switch series 1830 und 1930.
ECO
PUsHNDrIVE
\ 74
26.65
Powerful, illuminated rocker switch with plate spring switching system Silk matt printable surface Can be mounted from rear (alternatively with frame) Switching system sealed from rocker to protect against overowing water (VDE 700 part 15) Snap fastening for wall thicknesses > 2 mm
Other actuator forms (e.g. oval) As a double switch Other colors Other printing variants Other terminal types Other lamp variants Variant without illumination Cable assembly
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II
2E4 < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI terminal side -20 C ... +100 C actuating side -20 C ... +55 C UL 94 V-2 850 C PA PA Cu and CuZn bare (bearing terminal silver plated) 80 N
1/4/7
75 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
PRODUCT FEATUREs
ON REQUEsT
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
single-pole
TOGGLE SWITCHEs
SLIDE SWITCHEs
1656.1723
ROTArY SWITCHEs
27.15
12.8
10
13 21
11.5 25.5
11.35
SNAP-ACTION sWITCHEs
x >- 2
y 28
+-0.1
z 13 +-0.1
MICrO-sIGNAL sWITCHEs
SENsOrs
10
37
ECO
\ 76
PUsHNDrIVE
18
Mechanical life endurance Ambient temperature Material actuator housing terminals Miscellaneous
10E4 -40 C ... +85 C PA glass ber-reinforced PA silver plated illumination with mounted rocker: day design = light gray / night design = pea green
77 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
Attractive rocker switch (rocker separate) Million times proven, friction snap-action contact system Powerful with 100 000 switching cycles electrically and mechanically for DC voltage applications Indicator lamp identical Dust and water protected High variety With or without function illumination (LED) Installation from the front directly or with assembly frame Block connector support
FOOT SWITCHES
Other colors Other rocker symbols (laser etched) Other switching functions Other lamp variants With assembled rocker
ROTArY SWITCHES
PRODUCT FEATUREs
ON REQUEsT
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
SLIDE SWITCHEs
ROTArY SWITCHEs
FOOT sWITCHEs
10 (5) A 24 V DC 1E5
10 (5) A 12 V DC 1E5
Housing color
Terminal type
Terminal description
SNAP-ACTION sWITCHEs
MICrO-sIGNAL sWITCHEs
\ 78
PUsHNDrIVE
ECO
SENsOrs
Miscellaneous
3230.0702 3230.0701
24 12
2 x single-pole changeover switch with search lighting LED green circuit symbol: 3.32 2 x single-pole changeover switch with search lighting LED green circuit symbol: 3.32
10 (5) A 24 V DC 1E5
10 (5) A 12 V DC 1E5
Housing color
Terminal type
Terminal description
Miscellaneous
Stock version
24 24 24 24 24 24 24 24
79 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
Lamp
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
19.5 41.2
PUsHBUTTON SWITCHEs
9.3
25.5
Rocker 190.389.011 - without stop (switching function both sides) 190.389.021 - with stop (switching function one side) Cap 203.442.011 - with stop both sides (for lamp 3237)
Snap-on rocker for basic type 3230 and cap for basic type 3237 (without switching function) painted black with or without stop for both or one-sided switching function. Laser etched by customer or on request.
9
SLIDE SWITCHEs
Note: Rocker must be ordered separately in addition to the basic switch. Assembly on customer side.
FOOT sWITCHEs
ROTArY SWITCHEs
RC 44
+0.2 +0.05 +0.2 +0.05
SNAP-ACTION sWITCHEs
MICrO-sIGNAL sWITCHEs
22
Dummy piece for the basic types 3230 and 3237 with mounted black cap
SENsOrs
\ 80
PUsHNDrIVE
Tyco block connector for cable connection for basic switch 3230. Black, Tyco no. 1418994 AK connector (AK 5820 03) on request.
Tyco JPT (Junior Power Timer) female connectors for terminals of 3230 series. Tyco No. 1355046. Tyco MCP (Mutliple Contact Point) on request.
www.marquardt-switches.com
81 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
3 OI
1 OI
PUsHBUTTON SWITCHEs
10
10
Circuit symbols
TOGGLE SWITCHEs
3 SLIDE SWITCHEs OI
1 OI
FA
10
10
ROTArY SWITCHEs
FOOT sWITCHEs
5 II O I
1 II O I
10
10
SNAP-ACTION sWITCHEs
5 II 0 I
MICrO-sIGNAL sWITCHEs
FA
10
\ 82
PUsHNDrIVE
ECO
Operating force Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Actuator Ambient temperature Material actuator housing terminals Terminal type Lighting type
7 N to 12 N +1,5 N < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI terminal side -40 C ... +85 C actuating side -40 C ... +85 C PA glass ber-reinforced / PC PA / PP silver plated Quick-connect terminal Symbol position 1 + 2 green; red function illumination red; yellow external function illumination red; yellow 24 V 12 V IP 66 and IP 68 actuator side
Lighting voltage
83 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
50E4
SNAP-ACTION SWITCHES
High dust and water protection with IP 66 and IP 68 Unique and millions of times proven snap-action switching system Self cleaning due to relative movement Up to 4 integrated LEDs for background and function illumination Mechanical life 500 000 cycles Wide range up to 20 A at 12 / 24 VDC Large variety of all required switching and circuit options Attractive design with various cap shapes and colors Large selection of laser etched symbols and acessories Individually congurable on www.marquardt-switches.com/congurator3250
FOOT SWITCHES
Further cap symbols (laser etched) Further switching functions Further illumination variants Further cap colors Customer specic cap style
ROTArY SWITCHES
PRODUCT FEATUREs
ON REQUEsT
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
single-pole
TOGGLE SWITCHEs
SLIDE SWITCHEs
ROTArY SWITCHEs
FOOT sWITCHEs
3250.0030 3250.0001
3250.0060 3250.0072 3250.0057 3250.0069 3250.0052 Changeover switch (SPDT) 3250.0118 3250.0142 3250.0115 3250.0139
24 24 12 12
3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8
with search lighting LED green circuit symbol: 50.02 with search lighting LED red circuit symbol: 50.02 with search lighting LED green circuit symbol: 50.02 with search lighting LED red circuit symbol: 50.02 circuit symbol: 50.44
SNAP-ACTION sWITCHEs
MICrO-sIGNAL sWITCHEs
24 24 12 12
3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8
with function indicator LED red with search lighting LED green circuit symbol: 50.17 with function indicator LED yellow with search lighting LED red circuit symbol: 50.17 with function indicator LED red with search lighting LED green circuit symbol: 50.17 with function indicator LED yellow with search lighting LED red circuit symbol: 50.17 circuit symbol: 50.47
SENsOrs
with search lighting LED green circuit symbol: 50.06 with function indicator LED red with search lighting LED green circuit symbol: 50.24 with search lighting LED green circuit symbol: 50.06 with function indicator LED red with search lighting LED green circuit symbol: 50.24
\ 84
PUsHNDrIVE
ECO
double-pole
ON / OFF switch (DPST) 3250.0196 3250.0184 Changeover switch (DPDT) 3250.0301 3250.0325 3250.0298 3250.0322 3251.0003 3250.0289 Changeover switch (DPDT momentary) 3250.0346 3250.0353 3250.0343 3250.0350
24 24 12 12 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8
3250-2F-30-1-0 3250-2F-35-2-0 3250-2F-10-1-0 3250-2F-15-2-0 with search lighting LED green circuit symbol: 50.42 with function indicator LED red with search lighting LED green circuit symbol: 50.36 with search lighting LED green circuit symbol: 50.42 with function indicator LED red with search lighting LED green circuit symbol: 50.36
24
3250-2A-31-1-0 3250-2A-00-1-0
with function indicator LED red with search lighting LED green circuit symbol: 50.25 circuit symbol: 50.49
24 24 12 12 12
3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8
with function indicator LED red with search lighting LED green circuit symbol: 50.29
ROTArY SWITCHES
with function indicator LED yellow with search lighting LED red circuit symbol: 50.29 with function indicator LED red with search lighting LED green circuit symbol: 50.29 with function indicator LED yellow with search lighting LED red circuit symbol: 50.29 with function indicator LED yellow with search lighting LED red with pre assembled cap circuit symbol: 50.29 circuit symbol: 50.53
85 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
Combination
TOGGLE SWITCHEs
SLIDE SWITCHEs
Changeover switch with OFF-position in the center (2xSPST - Center OFF) 3250.0379 3250.0436
24 24 24 12 12 12 12 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8
3250-3A-34-1-0 3250-3B-39-1-0 3250-3B-48-2-0 3250-3A-14-1-0 3250-3B-19-1-0 3250-3B-19-1-0-B0-bl-1390-1380-00 3250-3B-28-2-0 3250-3A-00-1-0 3250-3B-00-1-0 with function indicator LED red with search lighting LED green circuit symbol: 50.113 with search lighting LED green circuit symbol: 50.108 momentary function both sides with function indicator LED yellow with search lighting LED red circuit symbol: 50.128 momentary function both sides with function indicator LED red with search lighting LED green circuit symbol: 50.113 mit Suchbeleuchtung LED grn Schaltzeichen: 50.108 Tastfunktion beidseitig mit Suchbeleuchtung LED grn Schaltzeichen: 50.108 Tastfunktion beidseitig mit Funktionsanzeige LED gelb mit Suchbeleuchtung LED rot Schaltzeichen: 50.128 Tastfunktion beidseitig Schaltzeichen: 50.121 Schaltzeichen: 50.122 Tastfunktion beidseitig
ROTArY SWITCHEs
FOOT sWITCHEs
3250.0418 3-step changeover switch (2xSPDT) 3250.0514 3250.0577 3250.0616 3250.0572 3250.0590 3250.0511 3250.0574 3250.0613
24 24 24 24 24 12 12 12 12 12 12
3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8 3.0 x 0.8
3250-4A-34-1-0 3250-4B-39-1-0 3250-4C-38-1-0 3250-4B-38-2-0 3250-4B-48-2-0 3250-4A-14-1-0 3250-4B-19-1-0 3250-4C-18-1-0 3250-4B-18-2-0 3250-4B-28-2-0 3250-4B-28-2-0-B0-bl-1213-1223-02 3250-4A-00-K1-0
mit Funktionsanzeige LED rot mit Suchbeleuchtung LED grn Schaltzeichen: 50.117 mit Suchbeleuchtung LED grn Schaltzeichen: 50.112 Tastfunktion beidseitig mit Funktionsanzeige LED rot mit Suchbeleuchtung LED grn Schaltzeichen: 50.137 Tastfunktion einseitig mit Funktionsanzeige LED rot mit Suchbeleuchtung LED grn Schaltzeichen: 50.132 Tastfunktion beidseitig mit Funktionsanzeige LED gelb mit Suchbeleuchtung LED rot Schaltzeichen: 50.132 Tastfunktion beidseitig mit Funktionsanzeige LED rot mit Suchbeleuchtung LED grn Schaltzeichen: 50.117 mit Suchbeleuchtung LED grn Schaltzeichen: 50.112 Tastfunktion beidseitig mit Funktionsanzeige LED rot mit Suchbeleuchtung LED grn Schaltzeichen: 50.137 Tastfunktion einseitig mit Funktionsanzeige LED rot mit Suchbeleuchtung LED grn Schaltzeichen: 50.132 Tastfunktion beidseitig
SENsOrs
MICrO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
mit Funktionsanzeige LED gelb mit Suchbeleuchtung LED rot Schaltzeichen: 50.132 Tastfunktion beidseitig Schaltzeichen: 50.125
\ 86
PUsHNDrIVE
ECO
43 35.4 24.3
43.1
20.6
Series 3250
24.3
SLIDE SWITCHES
32.2
32.2
20.6
36.4
36.4
20.6
Cap design 1 black 203.990.015 - no light guide 203.105.016 - 1 light guide 203.105.026 - 2 light guide red 203.990.045 - kein light guide 203.105.036 - 1 light guide 203.105.046 - 2 light guide lock 1 203.107.016 - bl.; no light g. 203.107.046 - bl.; 1 light g. 203.107.076 - red; no light g. 203.107.106 - red.; 1 light g. lock 2 203.107.026 - bl.; no light g. 203.107.056 - bl.; 1 light g. 203.107.086 - red.; no light g. 203.107.116 - red.; 1 light g.
87 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
lock 3 203.107.036 - bl.; no light g. 203.107.066 - bl.; 1 light g. 203.107.096 - red.; no light g. 203.107.126 - red.; 1 light g.
SNAP-ACTION SWITCHES
Snap-on cap for basic type 3250. Painted black or red. With or without light guide for function illumination. Laser etched by customer or on request. Versions with locking function: - lock 1 in neutral position - lock 2 in actuated position - lock 3 in both positions Note: Rocker must be ordered separately in addition to the basic switch. Assembly on request or on customer side.
FOOT SWITCHES
ROTArY SWITCHES
PUSHBUTTON SWITCHES
32.2
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
TOGGLE SWITCHEs
Cap design 2 black 203.991.015 - no light guide 203.106.016 - 1 light guide 203.106.026 - 2 light guide red 203.991.045 - kein light guide 203.106.036 - 1 light guide 203.106.046 - 2 light guide
FOOT sWITCHEs
ROTArY SWITCHEs
SLIDE SWITCHEs
SNAP-ACTION sWITCHEs
Assembly frame Can be stringed together; black 217.887.011 (end piece) 217.887.021 (center piece)
4.6 26
MICrO-sIGNAL sWITCHEs
26
4.6
21.1 17.32
36.8
21.1
\ 88
PUsHNDrIVE
ECO
SENsOrs
36.8
53.9
53.9
Adapter frame for basic type 3250 in black. For cut-out 44 mm x 22 mm.
34 50 36.8
1.6
PUSHBUTTON SWITCHES
21.1 25
42.6
1.5
Hole plug for basic type 3250. With support for block connector.
13.5 17 2 43
Pilot light 3257 in the same design as basic type 3250 without switching function. With 2 LEDs. Different colors available on demand. Each LED individually controllable. Laser inscription by customer or on request.
89 ]
PUSHNDRIVe
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
24.3
FOOT SWITCHES
ROTArY SWITCHES
Panel seal for base switch 3250 / adapter frame 217.879.011. Dustand water protection IP 67 from actuation side (correct customer assembly mandatory). Assembly on customers side or on demand. Thickness 1.5 mm; black.
23.9
SLIDE SWITCHES
TOGGLE SWITCHES
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
TOGGLE SWITCHEs
Tyco JPT (Junior Power Timer) female connectors for terminals of 3250 series. Tyco No. 1355046.
SLIDE SWITCHEs
ROTArY SWITCHEs
FOOT sWITCHEs
004
005
006
014
019
047
SNAP-ACTION sWITCHEs
048
069
097
121
122
128
MICrO-sIGNAL sWITCHEs
129
138
139
140
145
147
\ 90
PUsHNDrIVE
ECO
SENsOrs
3 0I
1 0I
10
10
Circuit symbols
50.01
50.02
TOGGLE SWITCHES
5 3 0I
1 0I
5 3
1
SLIDE SWITCHES
10
FA
10
50.06
50.17
5 3 0I
9 1 0I FA
10
10
50.24
50.25
5 3 8 6 0I FA
5 0I
10
FA
10
50.29
50.36
SENSOrS
5 3 8 6 0I
1 0I
3
ECO
10
7
PUSHNDRIVe
50.42
50.43
91 ]
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FA
FOOT SWITCHES
ROTArY SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
3 0I 0I
5 3
PUsHBUTTON SWITCHEs
TOGGLE SWITCHEs
50.44
50.47
3
SLIDE SWITCHEs
6 0I
5 3 8 6
0I
ROTArY SWITCHEs
50.49
50.53
FOOT sWITCHEs
3 8 II 0 I
1 II 0 I
5 3 8 6
10
10
50.108
50.112
SNAP-ACTION sWITCHEs
3 8 II 0 I FA
1 II 0 I
5 3 8 6
MICrO-sIGNAL sWITCHEs
10
FA
10
50.113
SENsOrs
50.117
3 8
ECO
3 8 II 0 I
II 0 I
7
PUsHNDrIVE
50.121
50.122
\ 92
5 3 8 6 II 0 I II 0 I
3 8
2 9 1
FA
10
5 3 8 6 2 9 1 II 0 I
6/8
FA
10
FA
10
50.132
50.137
3 II 0
50.139
93 ]
PUSHNDRIVe
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
II 0 I
5 3 8 6 2 9 1
TOGGLE SWITCHES
50.125
50.128
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
PRODUCT FEATUREs
Robust and powerful rocker switch Dust protected Approval for 400 V
ON REQUEsT
PUsHBUTTON SWITCHEs
TOGGLE SWITCHEs
Terminal description
Miscellaneous
25 A 400 V AC
Housing color
FOOT sWITCHEs
ROTArY SWITCHEs
three-pole
Contact material
SNAP-ACTION sWITCHEs
45
14 13
13
31.51
MICrO-sIGNAL sWITCHEs
8.2 56
39
\ 94
PUsHNDrIVE
ECO
SENsOrs
Stock version
Terminal type
SLIDE SWITCHEs
PUSHbUTTON SWITcHEs
ROCKEr SWITCHES
ROCKER sWITCHEs
PUsHbUTTON sWITCHEs
TOggLE sWITCHEs
SLIDE sWITCHEs
ROTARY sWITCHEs
FOOT sWITCHEs
SNAp-ACTION sWITCHEs
MICRO-sIgNAL sWITCHEs
sENsORs
ECO
PUsHNDRIVE
95 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SERIEs 1680
Single and double-pole pushbutton switches to 16 (4) A / 12 (12) A 250 V AC
PUSHbUTTON SWITcHEs
ROCKEr SWITCHEs
\ PAgE 98 104
PUsHBUTTON SWITCHEs
SERIEs 1683
Single and double-pole pushbutton switches to 16 A 250 V AC
Appliance cut-out: 19.2 x 12.9 mm
SLIDE SWITCHEs
TOGGLE SWITCHEs
SERIEs 1691
Smallest single-pole pushbutton switches for low voltages
PAgE 109
FOOT sWITCHEs
ROTARY SWITCHEs
SERIEs 1247
Double-pole pushbutton switches to 7 (7) A 250 V AC
SNAP-ACTION sWITCHEs
SERIEs 5000
Round pushbutton switches for at least 200 000 mechanical switching cycles
Appliance cut-out: 16.0 mm
MICRO-sIGNAL sWITCHEs
SERIEs 1846
Single-pole pushbutton switches to 2 (1) A 250 V AC
Appliance cut-out: 19.2 x 12.9 mm
ECO
SENsORs
SERIEs 1840
Single and double-pole pushbutton switches to 6 (4) A 250 V AC
PUsHNDRIVE
\ 96
SERIEs 1660
Single and double-pole pushbutton switches to 16 (4) A 250 V AC
Appliance cut-out: 30.0 x 22.2 mm
PUSHbUTTON SWITcHEs
ROCKEr SWITCHES
SERIEs 1670
Single and double-pole pushbutton switches to 16 (4) A 250 V AC
Appliance cut-out: 30.0 x 22.2 mm
97 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
Million times proven double lifting contact system with at least 100 000 mechanical switching cycles High electrical rating up to 16 A High mechanical load capacity up to 750 N (for foot actuation) Great variety Variable housing and pushbutton form with holders With pole separating wall (basic type 1689)
ON REQUEsT
Special plastics Other terminal variants Customized actuators and housing contours Cable assembly Behind PCB mountable variants
FOOT sWITCHEs
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II
10E4 < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +100 C ... +105 C ... +125 C (product-dependent) actuating side -20 C ... +55 C UL 94 (actuator: V-0, socket: V-1, housing: V-2) UL 94 V-0 (product-dependent) 850 C PBTP / PA / PA (product-dependent) PA / PA glass ber-reinforced / PA C3U / PA Latamid glass ber-reinforced (product-dependent) silver plated / tinned / copper bare (product-dependent) 80 N
7/1/2/4
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
(product-dependent)
\ 98
PUsHNDRIVE
ECO
single-pole
ON / OFF switch (SPST) 1681.2102 1681.3104 1681.4403 1681.4431 1681.1101 1681.1702 1681.3101 1681.3701 1681.4402 1681.4701 1681.5701 Normally closed contact (SPNC) 1681.9408 Normally open contact (SPNO) 1681.1354 1681.3501
4.8 vertical 4.8 horizontal 3 3 Au Ag 7.0 2.5 7.0 2.5 24 19.7 21.3 special housing contour horizontal 3 Ag 6.5 1.5 26.85 29.4 22.8 resting pin vertical 4.8 horizontal horizontal 5.3 long horizontal 4.8 vertical 4.8 vertical 4.8 horizontal 4.8 horizontal horizontal horizontal 3 3 3 3 3 3 3 3 3 3 3 Ag Ag Ag Ag Ag Ag Ag Ag Ag Ag Ag 7.0 2.5 7.0 2.5 7.0 2.5 7.0 2.5 7.0 2.5 7.0 2.5 7.0 2.5 7.0 2.5 7.0 2.5 7.0 2.5 7.0 2.5 26.5 23.8 22.2 26.5 23.8 22.2 24 21.3 19.7 24 21.3 19.8 26.5 23.8 22.2 24 21.3 19.7 26.5 23.8 22.2 resting pin ange on the end faces resting pin
24 21.3 19.7
99 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
24 21.3 19.7
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
double-pole
TOGGLE SWITCHEs
SLIDE SWITCHEs
ROTARY SWITCHEs
FOOT sWITCHEs
1682.6101 1682.6401
3 3 3 3
Ag Ag Ag Ag
24 20.95 19.7 26.5 23.8 22.2 28.8 26.1 24.5 26.5 23.8 22.2
rest pin
\ 100
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
19
19
14.5 4
24
14.5
24
11 10 13
11 10 13
19
19
26.5
14.5
26.5
11 11 10
13
4.3
10
1.60.1
4.3
11
11
3.7 7.3
101 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
13
10
13
FOOT sWITCHEs
19
6 4 26.5 h
14.5 24
14.5
ROTARY sWITCHEs
SLIDE sWITCHEs
10
14.5
TOGGLE SWITCHEs
Quick-connect terminal 4.8 x 0.8 vertical (actuator with holder for different caps)
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
14.5
4 24
14.5
7.7 10 13
11 19
TOGGLE SWITCHEs
13
19 4
6 24 14.5 h 4.5
14.5
4.3
24
SLIDE SWITCHEs
10
13
13 240.1
11 ROTARY SWITCHEs
3.7 7.3
1.60.1
11
FOOT sWITCHEs
18.5
1.3 4.5 19
14.5
0.93 4.23
13
\ 102
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
PCB terminal horizontal 1681.9408 normally closed contact SPNC (actuator with holder for different caps)
1.60.1
1.1
2.2
6 9.5 14.3
10.5
14.5
11.5
6.5
11 10
11 13
10.2
19
19
26.5
14.5
14.5
11
19
7.7
11
Quick-connect terminal 4.8 x 0.8 horizontal (actuator with holder for different caps)
19 6
4.3
7.7
11
10.2
11
103 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
10
13
10
13
FOOT sWITCHEs
26.5
14.5
24
14.5
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
10.2
13
14.5
ROCKEr SWITCHEs
14.5
24
11 PUsHBUTTON SWITCHEs 19
7.7 11
6.5
14.5
10.2
10
10
TOGGLE SWITCHEs
13
Quick-connect terminal 6.3 vertical (actuator with holder for different caps)
4.5 2.6 1.5 10.8 11.2 2 3 2 19 2.5 1.1 4.4 1.6 4.5 5.7 3.7 7.3 3.7 11 0.8
14.5 9.5
25.3
13
5.95
h h=24
SLIDE SWITCHEs
ROTARY SWITCHEs
\ 104
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
13 10 1.1
Mechanical life endurance Operating force Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Ambient temperature Flammability Glow wire test temperature Actuator Material actuator housing Plug force of the terminals Approval marks Suitable for appliances of protection class II
10E4 approx. 8 N (basic type 1683) approx. 12 N < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI terminal side -20 C ... +100 C actuating side -20 C ... +55 C UL 94 (actuator: V-0, socket: V-1, housing: V-2) UL 94 V-0 850 C IP 40 IP 65 and IP 67 (product- dependent) PC / EPDM / PA Latamid PA / PA glass ber-reinforced / PA C3U / PA Latamid glass ber-reinforced 80 N
7/1/4
105 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
Million times proven, double lifting contact system High electrical rating up to 16 A High rating with 100 000 mechanical switching cycles Illuminated and non-illuminated variants
Other colors Printing Other lamp variants Snap-on customized actuators Other terminal variants (e.g. 6.3 x 0.8 mm) Cable assembly Variant with dust and water protection
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
\ 106
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTARY SWITCHEs SLIDE SWITCHEs TOGGLE SWITCHEs PUsHBUTTON SWITCHEs ROCKEr SWITCHEs
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
1686.1101
1687.1104
1684.1701 Lighting voltage (V) Actuator color / printing 16 (4) A 250 V AC 1E4 12 (8) A 250 V AC 1E4 10 (8) A 250 V AC 5E4 12 A 125 - 250 V AC 1/2 HP
1684.1101
1683.1802
1683.1201
1686.6155
1683.8101
1683.1101
1686.8104
230
4.8 3 3 3 3
4.8
4.8
4.8
4.8
Ag
Ag
Ag
Ag
Ag
Contact material Free position (FP) max. (mm) Operating position (OP) (mm) Permissible total travel position (TP) (mm)
IP 40
Contact material
28 28
28 IP 40
25
23.8
IP 40
IP 40
IP 40
IP 40
IP 65 and IP 67
Actuator
Actuator
snap-on actuator
Miscellaneous
Miscellaneous
TO 16 A 250 V AC
Stock version
Stock version
6.5
13
13
6.5
18
18
17
17
11 21 15
13
7.8
z
10
21 14 15
11
26.2
12.8
y 19.8 -0.1
z 12.9 +0.1
107 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
Basic types 1683, 1684, 1686 and 1687 single and double-pole illuminated / non-illuminated
Quick-connect terminal 4.8 x 0.8 1686.8101 and 1683.8104 with bellows for IP 65/IP 67
11
10.2
19.8
FOOT sWITCHEs
16.8
16.2
11.8
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
11
6.5
ROCKEr SWITCHEs
6.9
21
15 13
6.9 13
18
17
18
17
PUsHBUTTON SWITCHEs
8.1
11
TOGGLE SWITCHEs
Basic types 1683, 1684, 1686 and 1687 single and double-pole illuminated / non-illuminated
11
Quick-connect terminal 4.8 x 0.8 / 2 x 2.8 x 0.8 with external lamp 1686.6155
6.5 13
Quick-connect terminal 4.8 x 0.8 1684.1101, 1684.1104, 1684.1201, basic types 1687 and 1686
6.5 13
18
17
SLIDE SWITCHEs
z 12.9 +0.1
15
11 21 15
11 21
12.9
+0.1
ROTARY SWITCHEs
2 ... 3
19.8 -0.1
12.9 +0.1
FOOT sWITCHEs
18
17
6.5
0.7
1.1
1.60.1
3.7 7.3
SNAP-ACTION sWITCHEs
10.2
0.8
MICRO-sIGNAL sWITCHEs
Transparent PVC-protection cap for dust and water protection from the actuation side
19.8
8.6
SENsORs
\ 108
PUsHNDRIVE
ECO
25.8
PRODUCT FEATUREs
Small compact pushbutton switch for indirect actuation High rating with 100 000 mechanical cycles Pushbutton snapping on customized actuators
ON REQUEsT
For mains applications Customized actuators Different operating force
Mechanical life endurance Operating force Ambient temperature Material actuator housing terminals
10E4 6.0 1.0 N terminal side -25 C ... +70 C PA PA silver plated
Terminal description
Contact material
Miscellaneous
Housing color
Stock version
5 mA 30 V
Terminal type
2.5 10.7 10.7 2.5 5.5 2.5 1 4.1 3.3 4.1 3.3 5.5 2.5
12.8 6
0.5 3.15 9
12.8
3.15
6 11.9 6
109 ]
PUSHNDRIVe
ECO
SENsORs
PCB terminal
MICRO-SIGNAL sWITCHEs
10.8
14.1
13.3
15.6
14.1
13.3
10.8
3.5
15.6
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
Powerful single and double-pole pushbutton switch up to 10 A 125 V AC Optionally with fastening strip and interference suppression capacitor Support point terminal (single-pole normally open contact) Dust-protected
ON REQUEsT
FOOT sWITCHEs
Mechanical life endurance Actuator Material actuator housing Approval marks Suitable for appliances of protection class II
\ 110
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
single-pole
1247.0301
Ag
with strip
Terminal type
10 A 125 V AC
5 A 250 V AC
Terminal description
Contact material
Miscellaneous
Stock version
double-pole
Ag
24 9.4
5 9.4
24
5 SENsORs
29.2
19.5
2.8-0.8
27 M3.5
25
2.8-0.8
27 M3.5
25
19.5
29.2
111 ]
PUSHNDRIVe
Screw terminal mains side Quick-connect terminal motor side Quick-connect terminal additional connection with strip 1247.0301 and 1247.2301
Screw terminal mains side Quick-connect terminal motor side Quick-connect terminal additional connection without strip 1247.2102 and 1247.0102
ECO
MICRO-SIGNAL sWITCHEs
1247.2301
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
Attractive, round pushbutton switch Efcient contact system at least 200 000 mechanical switching cycles Variants with sealing cap for IP 54 dust and water protection Appliance cut-out with diameter 16 mm, alternatively with xing pin
ON REQUEsT
Other colors Actuator printing Snap-on for greater wall thickness Cable assembly
FOOT sWITCHEs
Mechanical life endurance Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Type of fastening Plug force of the terminals Approval marks Suitable for appliances of protection class II
20E4 250 PTI IP 40 IP 54 (in variants with sealing cap) terminal side -20 C ... +85 C actuating side -20 C ... +55 C UL 94 V-2 850 C PA glass ber-reinforced PA glass ber-reinforced silver plated Snap fastening 64 N
7/1/4
\ 112
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
single-pole
Normally open contact (SPNO) 5000.0101 5000.0103 5000.0104 5000.0211 5000.0212 5000.0501
2.8 2.8 2.8 2.8 2.8 2.8 3 3 3 3 3 3 Ag Ag Ag Ag Ag Ag 2.0 0.4 2.0 0.4 2.0 0.4 2.0 0.4 2.0 0.4 2.0 0.4 4.0 4.0 4.0 4.0 4.0 4.0 xing pin xing pin xing pin with IP 54 sealing cap
20 110.05 17 6.2
12.2
20 11 6.2
16+0.05
16+0.05
2.40.1
21.5
7.2
7.2
4 21
4 21
21.5
7.2
16.0 +0.05
4 21
17.80.1
2.4+0.1
16+0.05
10
Quick-connect terminal 2.8 x 0.8 (with xing pin) 5000.0211 and 5000.0212
113 ]
PUSHNDRIVe
ECO
SENsORs
SNAP-ACTION sWITCHEs
Quick-connect terminal 2.8 x 0.8 (with xing pin and IP 54 sealing cap) 5000.0501
21.5
17.80.1
10
10
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
Small, compact pushbutton switch Long life endurance with 500 000 mechanical switching cycles Special design for dust and water protection
ON REQUEsT
Other colors With printing Other terminal variants Cable assembly
FOOT sWITCHEs
50E4 approx. 1 N 4.0 N (1846.0204) < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +85 C actuating side -20 C ... +55 C UL 94 V-2 850 C PA PA silver plated / tinned silver plated tinned 80 N
7
Operating force Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Bearing terminal
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
Plug force of the terminals Approval marks Suitable for appliances of protection class II
\ 114
PUsHNDRIVE
ECO
single-pole
21 5 15.3
15 10
21 5 15.3
15 10 FOOT sWITCHEs
11.7
18.7
11.7
Solder terminal
18.7
21 15.3 5
15 10
11.7
19.8 -0.1
12.9 +0.1
PCB terminal
Transparent PVC-protection cap. Serves as dust and water protection for the actuating side.
25 ECO 19 0.8 8 PUSHNDRIVe
115 ]
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
3.3
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
100 million times proven switching principle with long life endurance with 100 000 mechanical switching cycles Fastening by round nut M12 Excellent actuating characteristic Variant for snapping on customized pushbuttons
ON REQUEsT
Higher power with 6 (6) A 250 V AC Other terminal types Cable assembly
FOOT sWITCHEs
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II
10E4 < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +100 C actuating side -20 C ... +55 C UL 94 V-2 850 C PA PA glass ber-reinforced / PA silver plated 80 N
7/1/4
\ 116
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
1841.1101
1842.1101 1841.1201 1841.1301 1841.6101 single-pole ON / OFF switch (SPST) double-pole Changeover switch (SPDT) Normally open contact (SPNO) Normally closed contact (SPNC) Changeover switch (SPDT momentary) Actuator color / printing Housing color
1843.1201
1843.1101
1842.6101 Actuator color / printing Housing color 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 5E4
4.8 3 3 3
4.8
4.8
Terminal description
3 3 3
Ag
Ag
Contact material
Contact material
Miscellaneous
Miscellaneous
TO 6 (4) A 250 V AC
Stock version
Stock version
117 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
ROCKEr SWITCHEs
PUsHBUTTON SWITCHEs
8.4
16.6
TOGGLE SWITCHEs
8 19.9
M12x0.75
23
12.7
ROTARY SWITCHEs
10.2 25.6
4.8-0.8
FOOT sWITCHEs
ON OFF
16.5 28
Aluminum identication plate to plugging on and with black inscription ON and OFF
SNAP-ACTION sWITCHEs
MICRO-sIGNAL sWITCHEs
Identication plate made of CuZn nickel-plated for plugging on as well as with twist protection and stamped inscription ON and OFF
26
SENsORs
\ 118
PUsHNDRIVE
22
SW 19
11.5
20 ROTARY sWITCHEs 20
Pushbutton 205.008.011
Pushbutton 203.106.011
119 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
Pushbutton made of PA black, rectangular 20 x 25 mm for assembly by customer on 1841.6101 and 1842.6101
25
11.5
FOOT sWITCHEs
SLIDE sWITCHEs
Pushbutton made of PA black, with diameter 20 mm for assembly by customer on 1841.6101 and 1842.6101
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
Illuminated and non-illuminated pushbutton switches Proven jump contact switching system (double interrupting) Opening and closing speed independent of the actuating speed Product-dependent with external lamp terminal
ON REQUEsT
Other colors Other printing variants Other terminal types Other lamp variants Cable assembly
FOOT sWITCHEs
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II
5E4 < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +85 C actuating side -20 C ... +55 C UL 94 V-2 850 C PC (product-dependent) / PA PA / PA glass ber-reinforced (product-dependent) Cu 80 N
7/1/4
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
\ 120
PUsHNDRIVE
ECO
SENsORs
(product-dependend) /
1663.0101 1660.0201 1665.3102 1664.0101 1660.0202 1662.0101 single-pole ON / OFF switch (SPST) double-pole ON / OFF switch (DPST) Normally open contact (SPNO)
230 230 230
1662.0201
1661.0220 Lighting voltage (V) Actuator color / printing Housing color 16 (4) A 250 V AC 1E4 16 (4) A 250 V AC
1660.0222
1660.3202
110
230
Changeover switch (DPDT momentary) 16 (4) A 250 V AC 1E4 16 (4) A 250 V AC 12 (4) A 250 V AC 1E4 12 A 250 V AC 1/2 HP 12 A 125 V AC 1/6 HP Terminal type
6.3 6.3 4.8 6.3 6.3 6.3 / 2 x 4.8
12 (4) A 250 V AC 1E4 12 A 250 V AC 1/2 HP 12 A 125 V AC 1/6 HP Terminal type Terminal description
3 3 3
6.3 / 2 x 4.8
4.8 3 3 <3
6.3
6.3
6.3
<3 Ag Ag
Ag
Ag
Ag
Ag
Ag
Contact material
Miscellaneous
Miscellaneous
TO 16 (4) A 250 V AC
Stock version
Stock version
121 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
PUsHBUTTON SWITCHEs
Lamp
TOGGLE SWITCHEs
Lamp 1667.0101
230 230 6.3 6.3
SLIDE SWITCHEs
1667.0102
Terminal type
ROCKEr SWITCHEs
25 18.7 2 33 24.8
31.7
30.8
20.5
SNAP-ACTION sWITCHEs
y 30
+0.1 +0.1
30.2
30.4 +0.1
30.8
20.5
\ 122
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
Quick-connect terminal 6.3 x 0.8 / 2 x 4.8 x 0.8 with external lamp terminal
20.5
33 24.8 2 1
25 18.7
20.5
29.3
21.8
Gasket 340.040.011
Dummy piece for size of basic type 1667 made of PA with housing and cover in black and with mounted gasket (340.040.011) for dust and water protection.
2.6
22.5
25
33
123 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
Transparent PVC-protection cap for switches of the basic types 1660, 1662, 1663, 1664, 1665 and 1667. Serves as dust and water protection of the actuation side.
0.6 10.6
28
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
Gasket made of EPDM black for sealing between switch and appliance for increased dust and water protection
24.7 22.1 19.3 9.5
ROTARY sWITCHEs
22.2 +0.2
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
Illuminated and non-illuminated pushbutton switch Internal gasket for IP 54 Proven jump contact switching system (double interrupting) Opening and closing speed independent of the actuating speed Product-dependent with external lamp terminal
ON REQUEsT
Other colors Other printing variants Other terminal types Other lamp variants Cable assembly Approval mark UL
FOOT sWITCHEs
Mechanical life endurance Operating force Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II
5E4 1E4 approx. 8 N < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 54 terminal side -20 C ... +85 C actuating side -20 C ... +55 C UL 94 V-2 850 C PC (product-dependent) / PA PA / PA glass ber-reinforced (product-dependent) Cu 80 N
7/
\ 124
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
1670.5201 1675.5315
1673.5501
1671.5101 1670.5203 1670.5204 1670.5202 1672.5101 single-pole double-pole ON / OFF switch (DPST) Changeover switch (SPDT) Normally open contact (SPNO)
230 230 230 230
1671.5201 Lighting voltage (V) Actuator color / printing Housing color 16 (4) A 250 V AC 1E4 12 (4) A 250 V AC 1E4 Terminal type
4.8 6.3 6.3 / 2 x 4.8
115 230
6.3 <3 3 3 3 3
6.3
6.3
Terminal description
Terminal description
3 Ag Ag Ag Ag
Ag
Ag
Ag
Contact material
Miscellaneous
Miscellaneous
TO 16 (4) A 250 V AC
Stock version
Stock version
125 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
PUsHBUTTON SWITCHEs
Lamp
TOGGLE SWITCHEs
Lamp 1677.5306
230 115 230 6.3 6.3
SLIDE SWITCHEs
1677.5308
Terminal type
33
ROCKEr SWITCHEs
25 4.5 16 2.6
33 22
ROTARY SWITCHEs
22.5
2.6
22
33.7
33
4.8 16.4
21.8
33
22.5
Quick-connect terminal 6.3 x 0.8 / 2 x 4.8 x 0.8 external lamp terminal basic type 1675
22
SNAP-ACTION sWITCHEs
y 30 30
+0.15 +0.15
33
\ 126
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
22.5
33 2.6 4.5 22
25 16
33
22.5
18.6
16.4 21.8
y 30 +0.15
z 22.2 +0.15
33 0.9 2.6 22
25 16
22.5
18.6 29.5
12.8 21.8
y 30
+0.15
z 22.2 +0.15
Dummy piece for size of basic type 1677 made of PA with housing in black and cover in blue
2.6
29.5
21.8
25
33
127 ]
PUSHNDRIVe
ECO
SENsORs
22.5
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
33
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
29.5
PUSHBUTTON SWITCHES
www.marquardt-shop.com
TOGGLE SWITcHEs
ROCKEr SWITCHES
ROCKER sWITCHEs
PUsHbUTTON SWITCHEs
TOggLE SWITCHEs
SLIDE SWITCHEs
ROTARY sWITCHEs
FOOT sWITCHEs
SNAp-ACTION sWITCHEs
mICRO-sIgNAL sWITCHEs
SENsORs
ECO
PUsHNDRIVE
129 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
SERIEs 0350
Three-pole toggle switches to 10 (4) A 400 V AC
TOGGLE SWITcHEs
ROCKEr SWITCHEs
PAgE 131
PUsHBUTTON SWITCHEs
SERIEs 1810
Single and double-pole toggle switches to 10 (4) A 250 V AC
Appliance cut-out: 19.2 x 12.9 mm 19.2 x 21.9 mm
SLIDE SWITCHEs
TOGGLE SWITCHEs
SERIEs 1820
Single and double-pole toggle switches to 6 (4) A 250 V AC
Appliance cut-out: 12 mm
FOOT sWITCHEs
ROTARY SWITCHEs
SERIEs 0100
Single-pole toggle switches to 2 A 250 V AC
Appliance cut-out: 12 mm
\ 130
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
PRODUCT FEATUREs
Robust and efcient rocker switch with 100 000 mechanical switching cycles With dust seal Approval for 400 V
ON REQUEsT
Mechanical life endurance Material actuator housing terminals Approval marks Suitable for appliances of protection class II
Terminal description
Contact material
Housing color
Miscellaneous
Stock version
Terminal type
three-pole
48.5 36 M4
22
30.5 8
4.5
30
M3.5
28
131 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
30
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
Attractive toggle switches 100 million times proven switching principle Long life endurance with 100 000 mechanical switching cycles Excellent actuating characteristic
ON REQUEsT
Other colors Other printing variants Other switching functions Other terminal variants Cable assembly
FOOT sWITCHEs
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II
5E4 (changeover switch with OFF position in center) 10E4 < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +100 C actuating side -20 C ... +55 C UL 94 V-2 850 C PA PA silver plated 80 N
7/1/4
\ 132
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
1819.1102 1813.1102 1818.1102 1811.1202 1818.2302 1818.1302 1818.1202 single-pole ON / OFF switch (SPST) double-pole Changeover switch (SPDT) Normally open contact (SPNO) Actuator color / printing Housing color
1814.2102
1811.1102
1812.1102
1819.1302 Actuator color / printing Housing color 10 (4) A 250 V AC 1E4 6 (4) A 250 V AC 5E4 6 (2) A 250 V AC 1E4
Changeover switch with OFF position in the center (SPDT - Center OFF)
Changeover switch with OFF position in the center (DPDT - Center OFF)
4.8
4.8
Terminal description
3 3 3 <3
<3
Ag
Ag
Ag
Ag
Contact material
Miscellaneous
Miscellaneous
TO 10 (4) A 250 V AC
Stock version
Stock version
133 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
ROCKEr SWITCHEs
21 3.6 2 14
15 9.8 9
21
3.6
2
15 9 14
PUsHBUTTON SWITCHEs
13.2
19.5
20.5
7 18.5
13
7 18.6
18
13
TOGGLE SWITCHEs
Quick-connect terminal 4.8 x 0.8 basic types 1813 and 1811 without third terminal
SLIDE SWITCHEs
14
3.5
0.8
ROTARY SWITCHEs
2 ... 3
FOOT sWITCHEs
21
3.6 2
13.2
21 24 15 14 2
14
11.7
18
7 18.6
7 10.2 22 18.6
SNAP-ACTION sWITCHEs
3.6 2
24 15
MICRO-sIGNAL sWITCHEs
0.8
SENsORs
\ 134
PUsHNDRIVE
ECO
11.7
14
3.5
11.7
Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II
< 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +100 C actuating side -20 C ... +55 C UL 94 V-2 850 C PA PA glass ber-reinforced / PA silver plated 80 N
7/1/4
135 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
5E4
FOOT sWITCHEs
100 million times proven switching principle Long life endurance with 50 000 mechanical switching cycles Excellent actuating characteristic Fastening with nut M12
Other colors Other switching functions Other terminal variants Cable assembly
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
PUsHBUTTON SWITCHEs
single-pole
TOGGLE SWITCHEs
SLIDE SWITCHEs
Terminal type
ROCKEr SWITCHEs
4.8
3 3
Ag Ag
ROTARY SWITCHEs
1823.6101
Changeover switch with OFF position in the center (SPDT - Center OFF) 1828.1101
4.8 4.8 4.8 <3 <3 <3 Ag Ag Ag
FOOT sWITCHEs
1828.1201 1828.1301
6 A 250 V AC 1/2 HP
6 A 125 V AC 1/4 HP
Terminal type
Terminal description
Housing color
Contact material
SNAP-ACTION sWITCHEs
double-pole
MICRO-sIGNAL sWITCHEs
SENsORs
Changeover switch with OFF position in the center (DPDT - Center OFF) 1829.1101
ECO
4.8 4.8
<3 <3
1829.1301
\ 136
PUsHNDRIVE
Miscellaneous
Stock version
M12x0.75 4 4
M12x0.75
22.9
8.9
8.9
22.9
7 23.9
16.6
7 7 23.9
16.6
M12x0.75 4
22.9
7 23.9
16.6
M12x0.75 4
M12x0.75 4
22.9
8.9
8.9
22.9
7 23.9 4.8x0.8
10.2 25.6
7 23.9
10.2 25.6
ON OFF
16.5 28
137 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
Aluminum identication plate to plugging on and with black inscription ON and OFF
SNAP-ACTION sWITCHEs
23
21.5
24
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
8.9
19.6
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
21.5
23
24
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
TOGGLE SWITCHEs
SLIDE SWITCHEs
6.5 24.5
Neopren-cap for screwing on (M12 x 0.75) to levers of the series 1820 for dust and water protection of the actuator side
ROTARY SWITCHEs
FOOT sWITCHEs
6.4
Lever receptacle in various colors for the plastic levers of the 1820 series for customer assembly. Serves as a design element and for distinguishing and marking.
\ 138
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
Lever receptacle 203.105.011 - black 203.105.021 - white 203.105.031 - red 203.105.041 - green
15
1.15
5.2
5E4
TACT AND KEY sWITCHEs
metal / PA (product-dependent) CnZn nickel-plated / Duroplast (base) / chromated galvanized steel (bracket plate) silver plated
2 A 250 V 1E3
Housing color
Terminal type
Contact material
Miscellaneous
Stock version
139 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
single-pole
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
Robust and powerful toggle switch with 50 000 mechanical switching cycles Central fastening with nut M12 Metal or plastic lever
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHEs
4.5
12.5
PUsHBUTTON SWITCHEs
15.5
10
M12x0.75
1.7
23.5 30
2.1
12.5
Solder terminal
TOGGLE SWITCHEs
SLIDE SWITCHEs
ON OFF
16.5 28
Aluminum identication plate to plugging on and with black inscription ON and OFF
ROTARY SWITCHEs
FOOT sWITCHEs
Identication plate made of CuZn nickel-plated for plugging on and with twist protection and stamped inscription ON and OFF
26
SNAP-ACTION sWITCHEs
\ 140
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SLIDE SWITcHEs
ROCKEr SWITCHES
ROCKER sWITCHEs
PUsHbUTTON SWITCHEs
TOggLE SWITCHEs
SLIDE SWITCHEs
ROTARY sWITCHEs
FOOT sWITCHEs
SNAp-ACTION sWITCHEs
mICRO-sIgNAL sWITCHEs
SENsORs
ECO
PUsHNDRIVE
141 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE SWITCHES
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SERIEs 4021
Double and four-pole slide switches to 10 A 125 V or 5 A 250 V AC (as voltage selector switch)
SLIDE SWITcHEs
ROCKEr SWITCHEs
PUsHBUTTON SWITCHEs
SERIEs 1206
Single-pole slide switches to 8 (8) A 250 V AC
\ 142
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY SWITCHEs
SLIDE SWITCHEs
TOGGLE SWITCHEs
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks
1E4 < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +85 C actuating side -20 C ... +55 C UL 94 V-2 850 C PA PA / hard paper (baseplate) / PA glass ber-reinforced (baseplate) silver plated / chromated 60 N
7/1/4
143 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
Different designs Various terminal types Suitable as voltage selector switch (for currentless switching) Sunken slide for protection against accidental actuation Simple assembly with screws
Other colors Other labels Single to four-pole variants Other terminal variants (e.g. PCB side)
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE SWITCHES
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
PUsHBUTTON SWITCHEs
double-pole
TOGGLE SWITCHEs
Terminal type
ROCKEr SWITCHEs
side 2.8
3 3 3 3 3 3 3 2.8 3
CuSn silver plated CuSn silver plated CuSn silver plated CuSn silver plated CuSn silver plated CuSn silver plated CuSn silver plated CuSn silver plated
5 A or 10 A only as voltage selector switch 5 A or 10 A only as voltage selector switch slide with actuating slot 5 A or 10 A only as voltage selector switch 5 A or 10 A only as voltage selector switch slide with actuating slot 5 A or 10 A only as voltage selector switch slide with actuating slot 5 A or 10 A only as voltage selector switch
SLIDE SWITCHEs
230V
ROTARY SWITCHEs
115V
230V
FOOT sWITCHEs
4021.0801
Changeover switch with OFF position in the center (DPDT - Center OFF) 4021.1203
5 long 3 CuSn silver plated
10 A 125 V AC 1E4
5 A 250 V AC 1E4
2 A 42 V AC 1E4
10 A 125 V AC
5 A 250 V AC
Terminal type
Terminal description
Housing color
Contact material
SNAP-ACTION sWITCHEs
four-pole
MICRO-sIGNAL sWITCHEs
\ 144
PUsHNDRIVE
ECO
SENsORs
Miscellaneous
Stock version
16.5
17.6
8 17.6
0.8
1.3 x 0.8
11.5
11.5
2.8 x 0.8
1.3 x 0.8
7 21
145 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE SWITCHES
16
R5
1.5
TOGGLE SWITCHEs
2.4
26.2
1.5-0.8
1.4 2.8
0.8
PUSHBUTTON SWITCHES
18.5
\ 146
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTARY SWITCHEs SLIDE SWITCHEs TOGGLE SWITCHEs PUsHBUTTON SWITCHEs ROCKEr SWITCHEs
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
Inscription
4021.4723
Mechanical life endurance Actuator Material actuator housing terminals Approval marks Suitable for appliances of protection class II
147 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
Powerful up to 25 A at 12-36 V DC Single-pole slide switch optionally with fastening strip For direct and indirect actuation Dust protected Castable
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE SWITCHES
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
\ 148
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTARY SWITCHEs SLIDE SWITCHEs TOGGLE SWITCHEs PUsHBUTTON SWITCHEs ROCKEr SWITCHEs
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
1206.0201 single-pole
1206.2503
17.5 18.3
23.3 25.3
5 ST
www.marquardt-switches.com
Solder terminal 1206.0201
15.6 6.8 2 1 4.8 13
3 Ag
3 Ag
12.5
5 ST 1 3.5
Miscellaneous
12.40.2 1.6+0.1
200.2 2+0.2
TO 8 (8) A 250 V AC
50.1
1.8+0.1
Stock version
ROTARY SWITcHEs
ROCKEr SWITCHES
ROCKER sWITCHEs
PUsHbUTTON SWITCHEs
TOggLE SWITCHEs
SLIDE SWITCHEs
ROTARY sWITCHEs
FOOT sWITCHEs
SNAp-ACTION sWITCHEs
mICRO-sIgNAL sWITCHEs
SENsORs
ECO
PUsHNDRIVE
149 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTArY SWITCHES
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
\ 150
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTArY SWITCHEs SLIDE SWITCHEs TOGGLE SWITCHEs PUsHBUTTON SWITCHEs ROCKEr SWITCHEs
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SERIEs 1703
ROTARY SWITcHEs
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Plug force of the terminals Approval marks Suitable for appliances of protection class II
3E4 < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 400 PTI IP 40 terminal side -20 C ... +100 C ... +55 C UL 94 (housing: V-0, spindle: V-2) 850 C PA PA glass ber-reinforced silver plated respectively bare 80 N
7
151 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
Creep and air distances greater than 8 mm, therefore suitable for mains and touchable low voltage 60 switching angle (1 - 6 switching steps) Fastening with thread M3 or bayonet connection With mechanical forced opening Approval for 400 V
Single to six-pole variant Other switching functions and sequences Other terminal variants Cable assembly Customized actuators Gold contacts
ROTArY SWITCHES
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
4.6
\ 152
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTArY SWITCHEs SLIDE SWITCHEs TOGGLE SWITCHEs PUsHBUTTON SWITCHEs ROCKEr SWITCHEs
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
1703.3201
1703.4001
Step switch
16 23
40
9 6 26
2.3
6.3
6.3
6.3
Terminal description
Terminal description
60
33 14
10 10
6.3x0.8
Ag 3 switching positions
Contact material
Miscellaneous
Miscellaneous
TO 20 (4) A 400 V AC
Stock version
Stock version
FOOT SWITcHEs
ROCKEr SWITCHES
ROCKER sWITCHEs
PUsHbUTTON SWITCHEs
TOggLE SWITCHEs
SLIDE SWITCHEs
ROTARY sWITCHEs
FOOT sWITCHEs
SNAp-ACTION sWITCHEs
mICRO-sIgNAL sWITCHEs
SENsORs
ECO
PUsHNDRIVE
153 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT SWITCHES
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SERIEs 2410
Ergonomic foot switches to 6 (2.5) A 250 V AC
FOOT SWITcHEs
ROCKEr SWITCHEs
PUsHBUTTON SWITCHEs
SERIEs 2420
IP 65 / 67 protected foot switch to 16 (4) A 250 V AC 25E3
\ 154
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY SWITCHEs
SLIDE SWITCHEs
TOGGLE SWITCHEs
Mechanical life endurance Proof tracking Material actuator housing Approval marks
155 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT SWITCHES
Long life endurance up to 300 000 mechanical switching cycles Robust design Cable can be retrotted by customer Ergonomical dimensions with different operating forces With wall hanger
Other colors Customized cable assembly Special switching functions Other terminal variants
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
single-pole
Normally open contact (SPNO) 2410.0301 Changeover switch (SPDT momentary) 2410.0401
M3 3 terminals <3 Ag 31 5 with switch 1005.1407 2 terminals M3 <3 Ag 31 5 with switch 1005.1801
ROTARY SWITCHEs
SLIDE SWITCHEs
Terminal type
ROCKEr SWITCHEs
Terminal description
Terminal type
Housing color
Contact material
FOOT sWITCHEs
double-pole
SNAP-ACTION sWITCHEs
Terminal type
Terminal description
Housing color
Contact material
Miscellaneous
MICRO-sIGNAL sWITCHEs
Combination
SENsORs
M3 3 terminals
<3
Ag
step 1: 25 5 N/ step 2: 85 15 N
Miscellaneous
\ 156
PUsHNDRIVE
Stock version
Stock version
39 28
6.5
131
86
218
NC C 1005.1407 1 NO wh br wh bl bl bl C
bu br bl
NC 1005.1501
1005.1801 C NO
Circuit diagram
2410.0101
2410.0501
bu - blue br - brown bl - black wh - white C - common terminal NC - normally closed contact NO - normally open contact
157 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT SWITCHES
ROTARY sWITCHEs
SLIDE sWITCHEs
231
Steel plate protection hood in orange color similar to RAL 2004 with edge guard and rubber feet as well as xation for foot switch of the basic type 2410
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
100.5
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
Protected against dust and water (IP 65 / IP 67) Snap-action switching system proved millions of times Compact design with clearly discernable tactile feedback, robust and anti-slip, screw holes for xing to the oor (optional) Versions for low DC signal currents, up to ratings of 16 A 250 V AC Wide range of switching functions, with and without cables Modern switch design, rocker available in different colors, can be printed to customer specications Cable assembly on customer side
ON REQUEsT
Special switching functions Other colors Customer logo Customized cable assembly
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
Mechanical life endurance Proof tracking Protection type Ambient temperature Material actuator housing terminals Approval marks Suitable for appliances of protection class II
2E6 250 PTI IP 65 and IP 67 terminal side -20 C ... +85 C actuating side -20 C ... +85 C PA glass ber-reinforced PA glass ber-reinforced nickel-plated
7
\ 158
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
2420.0301
2420.0501 2420.5201 2420.4101 single-pole 2420.0102 double-pole ON / OFF switch (SPST) Normally open contact (SPNO) Normally open contact (DPNO) Actuator color / printing Housing color
2420.0101
Combination
Normally open contact (SPNO) Actuator color / printing Housing color 14 (4) A 250 V AC 5E4 Terminal type
M3 M3 M3 assembled with wire end ferrule
<3
Terminal type
M3
<3 Ag
Ag 35 10 35 10 35 10 35 10
Ag
Contact material
Contact material
35 10
Miscellaneous
Miscellaneous
Miscellaneous
Stock version
Stock version
Stock version
159 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
FOOT SWITCHES
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
ROCKEr SWITCHEs
212.1 149
PUsHBUTTON SWITCHEs
Socket terminal M3
TOGGLE SWITCHEs
98.6
182
Steel plate protection hood in orange color similar to RAL 2004 with edge guard and rubber feet as well as xation for foot switch of the basic type 2420
86
SLIDE SWITCHEs
ROTARY SWITCHEs
131
123 154.3
160
FOOT sWITCHEs
1 2 3
NO
1 2 3
NO
SNAP-ACTION sWITCHEs
Circuit diagram
2420.0101
2420.0301
MICRO-sIGNAL sWITCHEs
1 2 3 4 5 6
ws sw
NO
sw ws
NO
SENsORs
2420.4101
2420.5201
\ 160
PUsHNDRIVE
ECO
ROCKEr SWITCHES
ROCKER sWITCHEs
PUsHbUTTON SWITCHEs
TOggLE SWITCHEs
SLIDE SWITCHEs
ROTARY sWITCHEs
FOOT sWITCHEs
SNAp-ACTION sWITCHEs
mICRO-sIgNAL sWITCHEs
SENsORs
ECO
PUsHNDRIVE
161 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SERIEs 3006
Tact switches to 50 mA 28 V
ROCKEr SWITCHEs
PUsHBUTTON SWITCHEs
SERIEs 6425
Key switches to 100 mA 28 V
SLIDE SWITCHEs
TOGGLE SWITCHEs
SERIEs 6450
Key switches to 100 mA 28 V
FOOT sWITCHEs
ROTARY SWITCHEs
SERIEs 3000
Key switches to 30 mA 28 V
PAgE 173
\ 162
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
Low height even with integrated LED SMD connection technique Pleasant actuating characteristic thanks to clearly tangible pressure point Extremely large actuator surface Six standard colors Two operating force variants Reow lead-free solderable
Mechanical life endurance Contact resistance (new condition) Ambient temperature Material terminals Bounce time Packing unit Miscellaneous
50E4 4N version, 20E4 6N version < 100 mOhm -40 C ... +95 C (1 h to +120 C) gold plated < 5 ms 1 800 pieces in blister belt on a roller rating max. 1W voltage range 20 mV - 28 V current range 10 A - 50 mA electrical life endurance: 4 N: 14V DC 10 mA 50E4 6 N: 14V DC 10 mA 20E4
163 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
single-pole
TOGGLE SWITCHEs
SLIDE SWITCHEs
ROTARY SWITCHEs
FOOT sWITCHEs
3006.2306
max 1 Watt
SNAP-ACTION sWITCHEs
SP
1 3.95 6.8
MICRO-sIGNAL sWITCHEs
SENsORs
ECO
\ 164
9.60.1
Single-pole normally open contact with and without LEDs Pleasant actuating characteristic and low actuation noise Low bounce time Standard with gold plated contacts Wide range of key caps for different design requirements
Contact resistance (new condition) Insulation resistance (new condition) Bounce time Contact distance Ambient temperature Contact material Material actuator housing terminals Terminal type Mechanical life endurance Flammability Miscellaneous
< 250 mOhm > 100 MOhm < 5 ms < 3 mm -20 C ... +70 C Au POM PBTP tinned PCB terminal 1E6 at 10 mA 12 V UL 94 HB The key base of the standard key can be snapped into a 1.2 mm thick frame with a cut-out of 13.55 x 13.55 mm. A current limiting to max. 20 mA must be provided for the integrated LED!
165 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
Customized key caps Other key cap colors Other LED colors Bicolor LED
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
100 mA 28 V
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
SLIDE SWITCHEs
ROTARY SWITCHEs
FOOT sWITCHEs
6425.6111 6425.6131
SNAP-ACTION sWITCHEs
Pitch (mm)
4.3
14.4
14.4
MICRO-sIGNAL sWITCHEs
13.5 14.8
13.5
With LED
3.6
0.8
13.5 14.8
4.3
14.4
14.4
14.4
3.6 1.5 10.7
14.4
3.6 1.5
11
10.7
7.1
ECO
3.6
PUsHNDRIVE
\ 166
3.6
13.5
0.8
13.5 14.8
0.8 10.9
13.5 14.8
7.1
13.2
10.7 7.1
6.8
15.5
15.5
without LED window: 825.000.011 - anthracite with LED window: 828.000.011 - anthracite 828.000.021 - dark gray
13 6.8 13.2 10.7 7.1 13.2 10.7 7.1 6.8
5.1 11.5
6.2
15.5
18.3
Key cap with ergonomic actuation surface 840.000.011 - anthracite 840.000.021 - dark gray 840.000.071 - red
17 6.8
10.7
1.4
11 15.5
167 ]
PUSHNDRIVe
SENsORs
0.6
15.5
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
13.2
10.7
7.1
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
11.5
ROCKEr SWITCHEs
PUsHBUTTON SWITCHEs
7.1 7.4
10.7
11.7
14.4
TOGGLE SWITCHEs
8 14.4
5.1 18.3
18.3
Key cap anthracite Cap transparent, enclosed loose 834.900.013 pitch 19 mm 835.900.013 pitch 16 mm Two-part key cap with snap-on transparent caps, individual labeling and color possibilities can be implemented at low cost by a customer inlay. For keys 6425.51xx with LED and 6425.0101 without LED.
ROTARY SWITCHEs
10.7
7.1
FOOT sWITCHEs
5.1
13.1 5.1
SNAP-ACTION sWITCHEs
MICRO-sIGNAL sWITCHEs
10.7 7
without LED window: 844.000.011 - anthracite with one LED window: 844.500.011 - anthracite
13
7.1 2.5
15.7
SENsORs
\ 168
PUsHNDRIVE
10.7
56.3 51
14.4
13.55
10
5.08
1.6
13.55
11.9 11.9
16.5
5.08
26.2
2.2
SH 3
FH 1.3 TH 1.3
Parallel guide
13.55
5.08
1.6 10 6
13,55
16.5 31.4
5.08
2.2
Parallel guide
169 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
triple key caps, pitch 16 mm double key caps, pitch 19 mm triple key caps, pitch 19 mm The parallel guide can be equipped additionally with a LED.
OR 0.1
17
190.059.023 Recommended appliance cut-out and perforation pattern component side parallel guide for:
FOOT sWITCHEs
ROTARY sWITCHEs
21.6
The parallel guide guarantees an optimum function even in case of off-center actuation and can be equipped additionally with one or two LEDs.
SLIDE sWITCHEs
190.059.013 Recommended appliance cut-out and perforation pattern component side parallel guide for: double key caps, pitch 16 mm
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
7.1
10.7
6.8
10.7
7.1
ROCKEr SWITCHEs
PUsHBUTTON SWITCHEs
051
052
053
054
055
056
Square key caps with white characters Please complete the reference numbers by the three gures below the respective character. Basic reference numbers for pitch 16 mm: 826 ... 011 - anthracite Other key cap colors and characters on request. 057 058 059 060 061 062
SLIDE SWITCHEs
TOGGLE SWITCHEs
063
064
065
066
067
068
ROTARY SWITCHEs
069
070
071
072
073
074
FOOT sWITCHEs
075
076
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
017
018
022
023
170
010
001
002
003
004
\ 170
PUsHNDRIVE
ECO
SENsORs
005
006
007
008
009
Single-pole normally open contact with key cap Narrow design with proven switching principle of series 6425 Pleasant actuating characteristic and low actuation noise Low bounce time Long life endurance Standard with gold plated contacts
Contact resistance (new condition) Insulation resistance (new condition) Contact material Contact distance Bounce time Ambient temperature Material actuator housing terminals Terminal type Mechanical life endurance
< 250 mOhm > 100 MOhm Au < 3 mm < 5 ms -20 C ... +80 C PA PBTP tinned PCB terminal 1E6 bei 10mA 12V
171 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
SLIDE SWITCHEs
ROTARY SWITCHEs
FOOT sWITCHEs
100 mA 28 V
ROCKEr SWITCHEs
5.08
1-1.5
Narrow key switch with integrated key cap The key base can be snapped into a 1.2 mm thick frame with a cut-out of 11 x 13.55 mm.
13.2
13.5 14.8
10.85 7.5 5.2
1.3 5.08
5.08
5.08
SNAP-ACTION sWITCHEs
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
www.marquardt-switches.com
\ 172
PRODUCT FEATUREs
With one or two normally open contacts switching in sequence By separating the mechanical and electrical components, a high contact reliability and excellent actuating characteristic are achieved Terminals sealed For direct or indirect actuation
ON REQUEsT
Available with centrally placed LED (only version with a pressure point) Different key caps
Mechanical life endurance Ambient temperature Material actuator housing terminals Contact material Contact distance
1E5 2E4 (basic type 3003 - two pressure points) -40 C ... +85 C PC / POM PA glass ber-reinforced tinned Au CuSn gold-plated < 3 mm
30 mA 28 V
Terminal type
Miscellaneous
Stock version
10.6
2.5
2.5
2.54
1.5
9.4
1.5 tk
2.54
12.4
9.4
173 ]
ECO
SENsORs
3.2
12.4 10.6
4.4
4.4 4.5
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
www.marquardt-shop.com
SNAP-AcTION SWITcHEs
ROCKEr SWITCHES
ROCKER sWITCHEs
PUsHbUTTON SWITCHEs
TOggLE SWITCHEs
SLIDE SWITCHEs
ROTARY sWITCHEs
FOOT sWITCHEs
SNAp-ACTION sWITCHEs
mICRO-sIgNAL sWITCHEs
SENsORs
ECO
PUsHNDRIVE
175 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SERIEs 1055
Subsubminiature snap-action switches IP 67 to 4 A 12 V or 2 A 24 V DC
SNAP-AcTION SWITcHEs
ROCKEr SWITCHEs
PUsHBUTTON SWITCHEs
SERIEs 1050
Subminiature snap-action switches to 10 (1.5) A 250 V AC
SLIDE SWITCHEs
TOGGLE SWITCHEs
SERIEs 1045
Subminiature snap-action switches IP 67 to 10(3) A 250 V AC 1E4
FOOT sWITCHEs
ROTARY SWITCHEs
SERIEs 1080
Miniature snap-action switches to 21 (8) A 250 V AC
SNAP-ACTION sWITCHEs
SERIEs 1005
Miniature snap-action switches to 21 (8) A 250 V AC
MICRO-sIGNAL sWITCHEs
SERIEs 1040
Rotary shaft snap-action switches to 4 (1) A 250 V AC
ECO
SENsORs
SERIEs 1010
Open snap-action switches to 6 (2) A 250 V AC
\ 176
PUsHNDRIVE
SERIEs 1019
Single-pole snap-action switches to 6 (2) A 250 V AC
SNAP-AcTION SWITcHEs
ROCKEr SWITCHES
SERIEs 1022
Snap-action switches IP 67 to 4 A 12 V DC
SERIEs 1117
Snap-action switches to 16 (6) A 400 V AC
SERIEs 1115
One pole pushbutton switches to 16 (4) A 400 V AC
177 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
Compact design with dust and water protected switching system acc. to IP 67 (basic types 1055 / 1058) Large overtravel of 1.2 mm for small size The specially designed pushbutton guide enables a start-up angle of 40 The modular principle offers a wide selection of terminals, auxiliary actuators and fastening types
ON REQUEsT
Rating 0.5 (0.5) A 250 V AC 25E3 and ENEC approval mark For higher ambient temperatures Customized cable assembly Basic type 1058 as double switch or with cable outlet in other directions
FOOT sWITCHEs
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Protection type
5E5 < 50 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) IP 00 terminal side basic types 1055 and 1056 IP 40 actuator side basic type 1056 IP 67 actuator side basic type 1055, terminal and actuator side basic type 1058 -40 C ... +85 C UL 94 HB POM / LCP / silicone rubber stainless steel spring steel PBTP tinned basic type 1058: wires FLRY 0.5 mm, tinned wire ends Ag gold plated
7
SNAP-ACTION sWITCHEs
MICRO-sIGNAL sWITCHEs
Ambient temperature Flammability Material actuator additional actuator housing terminals Contact material Approval marks Shock resistance Miscellaneous
SENsORs
on request
50 g terminal side sealed electrical life endurance at 24 V DC 2 A (ohmic load): 100E3, at 24 V DC 10 mA: 500E3
\ 178
PUsHNDRIVE
ECO
1058.0373 1058.0593
1.8 1.8
0.4 0.4
10.4 10.4
7.9 7.9
1055.0351 1055.0552 1055.2061 1055.2351 1055.3653 1055.3654 1055.5155 1055.5350 1055.8155 1056.0351 1056.2351 1056.3060 1056.3065 1056.3351 1056.3352 1058.0351 1058.0553 1058.0653 1058.5253
300 long 300 long 300 long 300 long coded cranked coded cranked coded cranked
9.4 0.3 9.4 0.3 13.75 0.3 9.4 0.3 9.4 0.3 9.4 0.3 12.4 0.65
0.4 0.4 0.4 0.4 0.4 0.4 0.8 0.5 0.8 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5
10.4 10.4 14.75 10.4 10.4 10.4 14.7 15.85 14.7 7.15 7.15 11.5 11.5 7.15 7.15 10.4 10.4 10.4 11.6
7.9 7.9 12.25 7.9 7.9 7.9 10.3 12.65 10.3 4.65 4.65 9 9 4.65 4.65 7.9 7.9 7.9 8.25 L31 L21 L02 L21
pin right 1.5 long pin right 2.5 long pin left 2.5 long pin both sides 2.5 long without pin pin right 2.5 long pin right 1.5 long pin right 1.5 long without pin without pin pin right 1.5 long pin left 1.5 long pin right 1.5 long pin both sides 5 long pin both sides 2.5 long pin both sides 2.5 long
4.2 14.05 0.45 2.6 1.3 1.3 1.3 1.3 1.3 1.3 1.8 1.8 1.8 4.2 12.4 0.65 6.15 0.3 6.15 0.3 10.5 0.3 10.5 0.3 6.15 0.3 6.15 0.3 9.4 0.3 9.4 0.3 9.4 0.3 9.7 0.45
179 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
FOOT sWITCHEs
without pin
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
\ 180
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTARY SWITCHEs SLIDE SWITCHEs TOGGLE SWITCHEs PUsHBUTTON SWITCHEs ROCKEr SWITCHEs
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
8 5 1.5 5 8
2.5 13 9 5 0.9 TP 7.9 1.5 OP 9.40.3 FP 10.4 5.6 3.23 4.35 0.35 3.8 0.2x45 3.8 1.3 2.2 2.95 1.3 5 5 6.3 3.1 3.5 9 3.1 2.5 0.5 5.33 3.3 2.5 9 8 5 2.95 2.2 5 0.9 1.3 5 3
13
9 5 2.95
Solder terminal
6.3
2.5 13
2.95
PCB terminal
1.3 5 5.33 5 3.3 3.1 3.5 9 3.1 0.2x45 0.35 4.35 3.23 0.5 2.5 6.3
6.3
TO 4 A 12 V OR 2 A 24 V DC
2.5
2.5 4.35
TP 4.65
13
FP 7.15
13
6.3
OP 6.150.3
1.5
1.5
1.3
2.95 9 9
5 2.95 5
Solder terminal
PCB terminal
TOGGLE SWITCHEs
13 4.2 1.7
OP 10.50.3 FP 11.5
TP 9
6.3
13
0.5
3.3 3.1
3.8
1.3
5.6
0.9x0.5
1.5
5.6
3.8
5 1.3
0.35
4.35
0.9
3.3 9
3.1 5.08
13
6.3 2.5
3.25
181 ]
PUSHNDRIVe
ECO
MICRO-SIGNAL sWITCHEs
13
SNAP-ACTION SWITCHES
3.1
3.5
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
PUSHBUTTON SWITCHES
0.5
0.5
ROCKEr SWITCHEs
40
PUsHBUTTON SWITCHEs
TOGGLE SWITCHEs
Approach angle up to 40 The robust pushbutton guide allows actuations by slides or camshafts with an approach angle of < 40 (depending on the friction partner). The mechanical life endurance depends on the material and surface properties of the slide and the installation situation in the appliance. Under optimum conditions and longitudinal actuation, 200E3 cycles can be achieved. The above sketch can be transposed to the basic types 1056 and 1058.
ROTARY SWITCHEs
SLIDE SWITCHEs
12.40.65 OP
FOOT sWITCHEs
MP
2.2
Auxiliary actuators
9.70.45
<11.5
8.3
SNAP-ACTION sWITCHEs
The auxiliary actuators are available as additional parts for the basic types 1055 and 1058 for retrotting or are already pre-assembled depending on the product. When assembling yourself, make sure that the lever is pushed into the housing slot right up to the stop.
9.70.45 OP
MP
MICRO-sIGNAL sWITCHEs
SENsORs
8.25 TP
2.2
<11.6
FP
140.092.021 fastening disc for the basic types 1055, 1056 und 1058
ECO
PUsHNDRIVE
The fastening disc offers a quick, reliable fastening possibility in combination with switches with 5 mm long pins to plates or plastic parts with a wall thickness up to 2.5 mm. Fastening disc
\ 182
10.3 TP
OP
TP
FP
17.2
<14.7
FP
Design Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material additional actuator housing terminals Bounce time Approval marks
DIN 41635 B 10E6 1E6 (versions with auxiliary actuator) < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 175 PTI IP 40 (actuator side) -40 C ... +100 C UL 94 V-2 850 C PA glass ber-reinforced / stainless steel spring steel PBTP tinned / silver plated / blank (product-dependent) < 5 ms
7/1/4
Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side
183 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
FOOT sWITCHEs
Small, efcient snap-action switches up to 10 (1.5) A 250 V AC or 10.1 A 125 - 250 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection of auxiliary actuators of chrome-nickel steel and plastic
Extended overtravel Material conformant with the lament wire test acc. to IEC 60335-1:2001 chap. 30 Increased or reduced difference travel Other operating forces and ratings Gold-plated contacts
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
SLIDE SWITCHEs
ROTARY SWITCHEs
1050.2122 1050.1426
Terminal type
ROCKEr SWITCHEs
sealed sealed 2.8 x 0.5 sealed sealed sealed 2.8 x 0.5 sealed sealed sealed 2.8 x 0.5 2.8 x 0.5 sealed sealed sealed sealed
Ag 2.2 8.4 0.3 Ag 2.2 8.4 0.3 Ag 1.5 8.4 0.3 Ag 1.5 9.9 0.3 Ag 5 9.9 0.3
7.5 7 7.5
1050.0202 1050.0802 1050.1102 1050.1202 1050.2102 1050.2202 1050.3102 1050.4102 1050.5202 1050.5702
Ag 1.5 8.4 0.3 Ag 1.5 9.9 0.3 Ag 1.5 8.4 0.3 Ag 1.5 9.9 0.3 Ag 1.5 8.4 0.3 Ag 1.5 8.4 0.3 Ag 0.5 11.1 1.5 Ag 0.6 16.2 1.5 Ag 0.6 16.2 1.5 Ag 0.5 11.1 1.5 Ag 0.6 16.2 1.5 Au 1.5 8.4 0.3 Au 1.5 8.4 0.3 Au 1.5 8.4 0.3 Au 0.5 11.1 1.5 Au 0.6 16.6 0.2
SNAP-ACTION sWITCHEs
0.2 10.8 9.1 0.2 0.2 1.0 1.0 1.0 1.0 1.0 0.2 0.2 0.2 1.0 1.0 9.3 9.3 15 20 20 15 20 9.3 9.3 9.3 15 20 7.5 7.5 7.4 13 13 7.4 13 7.5 7.5 7.5 7.4 13.6
SENsORs
MICRO-sIGNAL sWITCHEs
PUsHNDRIVE
ECO
1050.5251 1050.5305
\ 184
2.75
Terminal variants
Solder terminal
TOGGLE SWITCHEs 5.1 2.75 15 ROTARY sWITCHEs
0.5 2.5
1.6
1.6
7.5
2.75
1.3
185 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
2.75
1.3
1.3
2.75
FOOT sWITCHEs
9.5
9.5
SLIDE sWITCHEs
3.1
2.2
2.2
6.9
PUSHBUTTON SWITCHES
10
2.2
2.2
6.5
ROCKEr SWITCHEs
PUsHBUTTON SWITCHEs
2.3
22.5
SLIDE SWITCHEs
TOGGLE SWITCHEs
Additional parts
ROTARY SWITCHEs
Mushroom-shaped actuator The mushroom-shaped actuator allows, in addition to the vertical actuation from above, lateral approach from any direction. In such application cases, an angle of 45 is necessary on the actuating element (angle for versions with extended overtravel on request). To keep the friction here to a minimum, we recommend the use of materials with a low friction coefcient in relation to the material PA. In addition, the surface of the actuating element should be free from valleys. The mechanical life endurance depends on the material and surface properties as well as on the form of the slide.
\ 186
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
7.5
45
Switching positions
Standard actuator
TP OP FP
TP OP FP
Mushroom-shaped actuator
6.4
TP OP FP
TO 10 (1.5) A 250 V AC
187 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
ROCKEr SWITCHEs
12.3 FP OP 2.9 5 16.2 1.5 16.4 1.5 11.1 1.5 OP TP 7.4 15 TP 9 - 14 OP ju TP 10 15 9.4
< _ 16
TP
TP 13 TP 13
OP OP
0.8
12.3
PUsHBUTTON SWITCHEs
15.8 1.3
Auxiliary actuators
TOGGLE SWITCHEs
13
19
The auxiliary actuators are available as additional parts for later assembly or are already pre-assembled depending on the product. In the adjustable versions the operating position can be set application-specically by the set screw.
OP
12.3 0.6 TP
12.3 2.7
R2 .5
SLIDE SWITCHEs
FP
ROTARY SWITCHEs
16 1.3
13
19
FOOT sWITCHEs
TP
12.3
3.5
10.7 1.5
OP
5.7
SNAP-ACTION sWITCHEs
7.4
14
FP
12.3
19.7 TP
OP
12.3
FP
20.6 (12.3)
MICRO-sIGNAL sWITCHEs
11.5 4
19.5
SENsORs
(6.15)
OP ju
18.6 (12.3)
FP
16.6 0.2
PUsHNDRIVE
(6.15)
13.6
\ 188
(6.15)
20
20
FP
20
FP
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type
10E6, tightness up to 1.5E6 cycles 1E6 (versions with auxiliary actuator) < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 00 terminal side basic types 1045 and 1046 IP 40 actuator side basic type 1046 IP 67 actuator side basic type 1045, terminal and actuator side basic type 1048 -40 C ... +100 C UL 94 V-0 850 C stainless steel spring steel PA Latamid glass ber-reinforced tinned / faston terminals blank < 5 ms
7/2
Ambient temperature Flammability Glow wire test temperature Material additional actuator housing terminals Bounce time Approval marks
(61058)
PUSHNDRIVe
Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side
189 ]
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
Design
DIN 41635 B
Dust and water protected switching system according IP 67 Rating from low DC signal currents to ratings of 10 (3)A 250 VAC Versions for high motor rating up to 6 (6) A 250 VAC Versions with integrated mechanism for breaking contact weldings IEC 60335 Chapter 30 approved for household appliances More than 10 million switching cycles
FOOT sWITCHEs
Versions with reduced difference travel Versions with mounting pegs to the side With asymmetric pinning With customized wiring
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
\ 190
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTArY sWITCHEs SLIDE sWITCHEs TOGGLE SWITCHEs PUsHBUTTON sWITCHEs ROCKEr SWITCHEs
PUsHNDrIVE
ECO
SENsOrs
MIKrO-SIGNALsCHALTEr
Actuator
Terminal type
Lever drawing
Contact material
3 A 250 V AC 100E3
1 A 250 V AC 100E3
Terminal description
IP 67
IP 67
IP 67
IP 67
IP 67
IP 67
IP 67
IP 67
IP 67
IP 67
IP 67
IP 67
IP 67
Actuator
Terminal type
Lever drawing
Miscellaneous
Contact material
3 A 250 V AC 100E3
1 A 250 V AC 100E3
Actuator description
Terminal description
IP 67
1045.3151 1045.4102 1045.4151 1045.5102 1045.5112 1045.5502 1045.5512 1045.6102 1045.6502 1045.7102 1045.7502 1046.0104 1046.1103 1046.2904 1048.0151
IP 67
IP 67
L02
IP 67
L02
IP 67
L22
IP 67
L22
IP 67
L02
IP 67
L22
IP 67
L02
IP 67
L22
IP 67
IP 40
IP 40
IP 40
IP 67
191 ]
PUSHNDrIVE
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
ROCKEr SWITCHEs
1048.1102
1048.2151
Au 1.9 8.4 0.3 0.2 9.3 IP 67 cable outlet down 7.6
PUsHBUTTON sWITCHEs
5 (5) A 250 V AC 10E3 1 A 250 V AC 100E3 3 (3) A 250 V AC 30E3 6 (1) A 250 V AC 30E3 2 (1) A 250 V AC 100E3 3 A 250 V AC 100E3 10 (3) A 250 V AC 10E3 6 (6) A 250 V AC 30E3 Terminal type
TOGGLE SWITCHEs
SLIDE sWITCHEs
ROTArY sWITCHEs
Terminal description
FOOT sWITCHEs
Contact material Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator Actuator description
Ag
2.6
8.4 0.3
0.2
SNAP-ACTION sWITCHEs
9.3
MIKrO-SIGNALsCHALTEr
IP 67
SENsOrs
Lever drawing
Miscellaneous
PUsHNDrIVE
Stock version
\ 192
ECO
L22
IP 67
13.6
7.6
17
0.7
15 1
2.0
Ag
1048.6113
8.40.3
8.40.3 9.3
9.3
10
OP
TP
FP
OP
TP
FP
6.4
6.4
8.40.3
8.40.3
3.8
3.8
9.3
1.22 0.8
OP
OP
TP
FP
TP
FP
1.22 6.4
8.40.3
8.40.3
1.6
OP
TP
FP
OP
TP
FP
7.5 19.4
193 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
6.4
0.5
6.4
FOOT sWITCHEs
9.5
9.5
9.3
0.95
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
1.8
ROCKEr SWITCHEs
2.25
9.5
PUsHBUTTON SWITCHEs
10
TOGGLE SWITCHEs
SLIDE SWITCHEs
2.25
9.3
500
2.5
19.4
ROTARY SWITCHEs
500
FOOT sWITCHEs
2.25
8.40.3
4.95
6.4
2900
8.1 6.8
TP 7.6 OP
FP 9.3
2.5
500
19.4
\ 194
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
8.1 6.8
9.5 7.5
4.95
TP 7.6 OP
OP FP
TP
10.7 1.5 14
TP
11.11.5
OP 15
5.7
FP
12.3 3.6
12.3
Auxiliary actuators
The auxiliary actuators are available as additional parts for later assembly or are already pre-assembled depending on the product. In the adjustable versions the operating position can be set application-specically by the set screw. Switch versions without positive action feature a lever mounting point on the C and NC side, those with positive action only on the C side.
FP OP
TP
19.7
TP
OP
FP
12.3
12.3
FP
OP
TP
5
15.81.3
TP
0.8
2.9
16.21.5
OP
13
19
13
20
FP
12.3
12.3
OP TP
FP OP TP
TP
OP
12.3
2.8
FP
4.7 12.3
ECO
16.2 1.5
20
17 15 1 13.6
13
195 ]
PUSHNDRIVe
SENsORs
MICRO-SIGNAL sWITCHEs
0.6
15 1
17
13
13 161.3 19
TP
4.7
FP
OP
12.3
12.3
SNAP-ACTION SWITCHES
FP
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
12 9.5 1
11.54
19.5
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
7.6
7.6
ROCKEr SWITCHEs
FP
OP
12.3
6.8
13.5
11.71.5
10.2
PUsHBUTTON SWITCHEs
TOGGLE SWITCHEs
FP
SLIDE SWITCHEs
(6.15)
5
(6.15)
TP
1418.5
ROTARY SWITCHEs
13.6
20
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
www.marquardt-switches.com
\ 196
TP
3.8
OP
(12.3)
4.8
OP
(12.3)
18.6
FP
8 914 16
TP OP
20.6
FP
The precise mounting of the moving contact part (milled bearing blade) offers optimum snap-action even with slow actuation Wide range of ratings from 3 (1) A 250 V AC to 21 (8) A 250 V AC Versions with gold plated contacts for signal current applications Various auxiliary actuators, two suspension points
Low operating forces ( 0.15 N) Customized additional actuators Plug terminal 4.8 x 0.5 mm
Design Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator additional actuator housing terminals Bounce time Approval marks
DIN 41635 A 2E6 (basic type 1080) 20E4 (basic type 1085) < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 (actuator side) -40 C ... +125 C UL 94 V-0 850 C PETP glass ber-reinforced stainless steel PA glass ber-reinforced / PETP glass ber-reinforced silver plated / CuZn < 10 ms
7/1/4
Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side
197 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
FOOT sWITCHEs
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
\ 198
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTArY sWITCHEs SLIDE sWITCHEs TOGGLE SWITCHEs PUsHBUTTON sWITCHEs ROCKEr SWITCHEs
PUsHNDrIVE
ECO
SENsOrs
MIKrO-SIGNALsCHALTEr
Terminal type
Lever drawing
Contact material
3 A 125 - 250 V AC
21 A 125 V AC 1 HP
21 A 250 V AC 2 HP
Actuator description
Terminal description
10 A 125 V AC 1/8 HP
10 A 250 V AC 1/3 HP
16 A 125 V AC 1/3 HP
16 A 250 V AC 1/2 HP
EN 60335 cap. 30 conform G 1080.0440 1080.0539 1085.0342 1080.0585 Changeover switch (SPDT momentary)
14.7 0.5 standing 6.3 4.8 x 0.8 4.8 x 0.5 straight 6.3 standing 14.7 0.5 14.7 0.5 14.7 0.5 14.7 0.5 15.2 1.2 14.7 0.5 14.7 0.5 14.7 0.5 1.7 Au 4.0 Ag 4.0 Ag 0.5 Ag 1.0 Ag 1.0 Ag 1.0 Ag 1.0 Ag 1.0 Ag
<3
13.2
16.2
0.3
<3
13.2
16.2
0.3
<3
13.2
16.2
0.3
>3
13.2
16.2
0.8
<3
13.2
16.2
0.3
<3
13.2
16.2
0.3
<3
13.2
16.2
0.3
<3
13.2
16.2
0.3
<3
13.2
16.2
0.3
<3
13.2
16.2
0.3
<3
L02
11.7
18.8
0.7
<3
13.2
16.2
0.3
<3
13.2
16.2
0.3
TO 21 (8) A 250 V AC
<3
13.2
16.2
0.3
20.25
12.8 3.1 8
10.3 4 15.9
20.25
16.2 3.1 10
10.3 4
15.9
Terminal variants
20.25
16.2 3.1 10
10.3 4
20.25
10.3
15.9
10.3
10.3
3.1
3.1
15.9
10.9
3.1
3.1
10.3
10.3
3.1
3.1
22.2 27.8
22.2 27.8
2.8 3.1
10.3
15.9
10.3
3.1
0.8 14.4
3.3
19.35
199 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
10.3
3.1
1.6+0.1
SNAP-ACTION SWITCHES
Solder terminal
3.3
3.3
15.9
FOOT sWITCHEs
20.25
16.8
10.3
20.25
8.4
10.3
15.9
ROTARY sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
10.3
10.3
3.1
3.1
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
SLIDE SWITCHEs
TOGGLE SWITCHEs
Switching positions
<16.2
15.20.5
(10.5)
<17.3
13.7
11.7
ROTARY SWITCHEs
Auxiliary actuators
FOOT sWITCHEs
(10.5)
34.1 25.1 FP OP TP
4. 95
(9)
OP 20.60.7
TP
SNAP-ACTION sWITCHEs
(10.5)
19.3
MICRO-sIGNAL sWITCHEs
25.1 TP
.4
0.3
(9)
OP
TP
.3
FP
20.60.5
20.61.2
<22.3
24.5
19.3
(10.5)
17.2
SENsORs
\ 200
PUsHNDRIVE
ECO
(10.5)
5E6 version with lever or contact spacing > 3 mm 10E6 standard version 5E4 version with curved spring steel lever < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI -40 C ... +100 C on request ... +125 C ... +85 C UL 94 (housing: V-0, actuator: V-2) UL 94 V-2 850 C galvanized steel / spring steel / stainless steel Duroplast type 182 / PA glass ber-reinforced / PA Latamid silver plated / chromated < 10 ms
7/1/4
Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Ambient temperature Flammability Glow wire test temperature Material additional actuator housing terminals Bounce time Approval marks
Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side
201 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
Design
DIN 41635 A
FOOT sWITCHEs
Friction contact system whose shearing movement can loosen welding Very high inrush currents (capacitive) Contact distances less and greater than 3 mm Operating forces from 0.2 to 4.2 N
Material conformant with the lament wire test acc. to IEC 60335-1:2001 chap. 30 Side bearing terminal Electrical rating 16 (16) A 250 V 5E4 for normally closed and normally open version
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
\ 202
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTArY sWITCHEs SLIDE sWITCHEs TOGGLE SWITCHEs PUsHBUTTON sWITCHEs ROCKEr SWITCHEs
PUsHNDrIVE
ECO
SENsOrs
MIKrO-SIGNALsCHALTEr
Terminal type
Lever drawing
Miscellaneous
Contact material
16 A 125 V AC 1 HP
16 A 250 V AC 2 HP
21 A 125 V AC 1 HP
21 A 250 V AC 2 HP
Actuator description
Terminal description
13.4
16
1.0
14.6 0.4
2.6 - 4.2
13.4
16
0.3
14.8 0.4
1.5 - 2.5
L21
20.5 0.4
1.6 - 2.8
13.4 6.3 6.3 Ag Ag Ag Ag Ag Ag Ag <3 <3 >3 >3 >3 4.8 straight <3 6.3 straight <3 6.3
16
1.2
14.5 0.3
2.4 - 3.8
Ag
>3
1005.2809 1005.1207 1005.1226 1005.2505 1005.0904 1005.1204 1005.1201 1005.4001 Changeover switch (SPDT momentary)
13.4
16
0.3
14.7 0.5
2.4 - 3.8
13.4
16
0.3
14.7 0.5
2.4 - 3.8
13.4
16
1.2
14.4 0.3
3.5 - 4.9
13.4
16
1.2
14.4 0.3
2.4 - 3.8
13.4
16
1.2
14.4 0.3
2.4 - 3.8
13.4
16
0.3
14.7 0.5
1.5 - 2.5
13.4
16
0.3
14.7 0.5
1.5 - 2.5
Ag <3 6.3
13.4
16
0.3
14.7 0.5
2.4 - 3.8
Ag
<3
1005.0404 1005.1004
TO 21 (8) A 250 V AC
13.4
16
0.3
14.7 0.5
2.4 - 3.8
Terminal type
Lever drawing
Miscellaneous 1006.1514 1005.0507 1005.1010 1004.0509 1005.0101 1005.0401 1005.1001 1005.3501 1006.0701 1006.0901 1006.1011 1006.1101 1006.1201 1006.1301 1006.1401
Contact material
16 A 125 V AC 1 HP
16 A 250 V AC 2 HP
21 A 125 V AC 1 HP
21 A 250 V AC 2 HP
Actuator description
Terminal description
L12
18
23.5 0.9
20.8 1.2
1.2 - 2.1
13.4
16
0.3
14.7 0.5
2.4 - 3.8
13.4
16
1.2
14.4 0.3
2.4 - 3.8
13.4
16
0.8 - 1.8
13.4
16
0.3
14.7 0.5
1.5 - 2.5
13.4
16
0.3
14.7 0.5
1.5 - 2.5
13.4
16
0.3
14.7 0.5
1.5 - 2.5
13.4
16
0.3
14.7 0.5
1.5 - 2.5
L11
20.8 0.5
1.5 - 2.5
L02
15.4 1.2
0.8 - 1.4
L12
18
23.5 0.9
20.8 1.2
0.7 - 1.25
L01
14
16.6 0.3
15.3 0.5
1.5 - 2.5
L11
20.8 0.5
1.5 - 2.5
L04
15.7 2.7
0.3 - 0.55
TO 21 (8) A 250 V AC
L02
15.4 1.2
0.8 - 1.4
203 ]
PUSHNDrIVE
ECO
SENSOrS
MICrO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTArY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
ROCKEr SWITCHEs
1006.1511
1006.1801
1006.4103
1006.4203
1004.4601
1004.0402
<3 Ag 0.2 - 0.6 14.7 0.5 0.3 16 13.4 milled bearing blade
PUsHBUTTON sWITCHEs
21 (8) A 250 V AC 25E3 20 (4) A 400 V AC 1E4 16 (16) A 250 V AC 5E4 16 (4) A 400 V AC 5E4 16 (4) A 250 V AC 5E4 16 (4) A 250 V AC 25E3 12 (12) A 250 V AC 5E4 10 (6) A 250 V AC 5E4 10 (4) A 400 V AC 1E4 10 (4) A 250 V AC 5E4 8 (8) A 250 V AC 5E4 6 (2.5) A 400 V AC 5E4 6 (2.5) A 250 V AC 5E4 21 A 250 V AC 2 HP 21 A 125 V AC 1 HP 16 A 250 V AC 2 HP 16 A 125 V AC 1 HP 16 A 125 - 250 V AC 1/2 HP 10 A 125 - 250 V AC 1/2 HP 10 A 125 - 250 V AC 1/4 HP 8 A 125 - 250 V AC 1/3 HP 4 A 125 - 250 V AC 1/6 HP Terminal type Terminal description Contact distance (mm) Contact material Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator description
SLIDE sWITCHEs
TOGGLE SWITCHEs
ROTArY sWITCHEs
FOOT sWITCHEs
SNAP-ACTION sWITCHEs
6.3
6.3
6.3
<3
<3
<3
<3
<3
Ag
Ag
Ag
Ag
Ag
MIKrO-SIGNALsCHALTEr
0.7 - 1.25
1.5 - 2.5
1.5 - 2.5
1.5 - 2.5
0.5 - 1.1
20.8 1.2
20.8 0.5
20.8 0.5
20.8 0.5
23.5 0.9
SENsOrs
ECO
Lever drawing
L12
L31
L11
L11
L11
PUsHNDrIVE
Miscellaneous
Stock version
\ 204
13.4
18
16
0.3
14.7 0.5
22 1
0.2 - 0.6
Ag
<3
6.3
1004.1002
10.3
16
16
8.4
3.4 22.2 28
3.4 22.2 28
Solder terminal
TOGGLE SWITCHEs
10.3
1.6+0.1
22.2
3.4 22.2 28
8.65 15
3+0.1
22.2 1.6+0.1
10.3 7.5
10.3
2.5
3+0.1 15
8.65
22.2 28
205 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
Screw terminal M3
3.4
16
ROTARY sWITCHEs
SLIDE sWITCHEs
16
5.6
16
2.5
10.3
PUSHBUTTON SWITCHES
10.3
10.3
ROCKEr SWITCHEs
20.2
15.5 3
8.7
10.9
16
PUsHBUTTON SWITCHEs
10.3
10.3
5.9
3.4 22.2 28
3.4 22.2 28
15.2
ROTARY SWITCHEs
FP: free position OP: operating position TP: permissible total travel position
FP OP
14.7 0.5
FOOT sWITCHEs
16
\ 206
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
13.4
<
TP
6.6
16
<
23.5 FP
<
21.5 FP OP TP
<
22 1
FP OP TP
18.5
22.7
<
22
FP OP TP
<
FP OP TP
35.7
TO 21 (8) A 250 V AC
20.6
207 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
ROCKEr SWITCHEs
25.5
PUsHBUTTON SWITCHEs
38
43
TOGGLE SWITCHEs
Insulating plate for solder terminal 0.5 mm: 231.009.011 Additional parts
Insulating plate for quick-connect terminal 0.5 mm: 231.010.011 0.8 mm: 231.010.021
Lever 20.6 long with roller diameter 5 out of PA yellow (to be mounted lateral with the switch using screws)
ROTARY SWITCHEs
191.013.013
FOOT sWITCHEs
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
www.marquardt-switches.com
\ 208
25.5
Extremely low switching torques Spring steel auxiliary actuators which are easily adaptable to customer-specic installation conditions
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator additional actuator housing terminals Contact distance Approval marks
5E6 < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 actuator side IP 00 terminal side -35 C ... +85 C UL 94 V-2 850 C PA glass ber-reinforced stainless steel spring steel PA glass ber-reinforced / PETP silver plated < 3 mm
209 ]
PUSHNDRIVe
ECO
SENsORs
Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
FOOT sWITCHEs
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
SLIDE SWITCHEs
1040.0114 1040.0301
Terminal type
ROCKEr SWITCHEs
16.8 12 11 17.5 RL
26
OP
TP
3.6
0.8
2.8
1040.0111
Enclosed loose: actuating lever 80 long, diameter 0.6 mm made of stainless spring steel and fastening disc FP: free position 23 OP: operating position 8 3 TP: permissible total travel position 26 Pretravel angle max. 34 Overtravel angle min. 15 Difference angle 5-15 Switch actuating torque 0.6-0.9 Nmm End actuating torque min. 0.2 Nmm Reset torque min 0.15 Nmm
ROTARY SWITCHEs
FOOT sWITCHEs
83
9.5
23
2.3
26
16.8 12 11 17.5 RL
MICRO-sIGNAL sWITCHEs
26
OP
TP
3.6
0.8
2.8
1040.0114
SENsORs
Enclosed loose: actuating lever 80 long, diameter 0.6 mm made of stainless spring steel and fastening disc FP: free position 23 OP: operating position 8 3 TP: permissible total travel position 26 Pretravel angle max. 34 Overtravel angle min. 15 Difference angle 5-15 Switch actuating torque 0.9-1.7 Nmm End actuating torque min. 0.2 Nmm Reset torque min. 0.15 Nmm
SNAP-ACTION sWITCHEs
83
9.5
23
2.3
26
16.8 12 11 17.5 RL
26
OP
2.8
TP
PUsHNDRIVE
3.6
0.8
Without lever and fastening disc FP: free position 23 OP: operating position 8 3 TP: permissible total travel position 46 Pretravel angle max. 34 Overtravel angle min. 35 Difference angle 5-15 Switch actuating torque 0.6-0.9 Nmm End actuating torque 0 Nmm Reset torque 0 Nmm
9.5
8 3
1040.0301
\ 210
26
Powerful snap-action switch with C-spring contact system according to design DIN 41635C High switching reliability due to large contact forces directly after switching Small size, large travel and difference travel Short bounce time Contact system insensitive to vibrations
Extended overtravel Special base forms Special actuating cams In addition to a wide range of normally closed contacts, normally open contacts and changeover switches and spring sets without snap function (basic type 1017) are available
Design Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Bounce time Approval marks
DIN 41635 C < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 00 -20 C ... +85 C ... 120 C (basic type 1014) UL 94 V-2 or UL 94 HB 850 C spring steel / PA glass ber-reinforced / PA / metal (only 1017.0153) PA glass ber-reinforced / PA silver plated < 5 ms
7
Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side
211 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
FOOT sWITCHEs
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm)
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
SLIDE SWITCHEs
0.25 - 0.6 2.2 0.6 0.9 0.4 3.5 0.45 - 1.05 2.2 0.6 0.9 0.4 3.5 0.15 - 0.5 2.2 0.6 0.15 - 0.5 1.4 0.6 0.15 - 0.5 2.2 0.6 0 3.2
ROTARY SWITCHEs
6 (2) A 250 V AC 25E3 2 (0.5) A 250 V AC 20E4 2 (0.5) A 250 V AC 5E4 2 A 12 V DC 10E4 1 A 24 V DC 10E4 0.5 A 15 V 5E4 0.1 A 24 V DC 5E4 30 mA 12 V 5E4
Terminal description
Contact material
Actuator description
Au
FOOT sWITCHEs
0.45 - 1.05 6.9 0.6 0.9 9.7 5.1 0.45 - 1.05 3.8 0.6 0.9 6.6 2
1010.9802 1010.9852 1010.0101 1010.3001 1010.4402 1010.0304 1010.2003 1010.4103 1010.6002 1010.6003
0.45 - 1.05 6.9 0.6 0.9 9.7 5.1 0.25 - 0.6 2.2 0.6 0.9 0.4 3.5 0.25 - 0.6 0.9 0.6 0.9 3.6 0.2 0.25 - 0.6 1.3 0.6 0.9 4.1 0
SNAP-ACTION sWITCHEs
0.25 - 0.6 2.2 0.6 0.9 0.4 3.5 0.45 - 1.05 2.2 0.6 0.9 0.4 3.5 0.25 - 0.6 2.2 0.6 0.9 0.4 3.5 0.45 - 1.05 11.2 0.6 0.9 13.8 9.9 0.25 - 0.6 11.2 0.6 0.9 13.8 9.9 0.45 - 1.05 2.2 0.6 0.9 0.4 3.5 0.45 - 1.05 0.9 0.6 0.9 3.6 0.2 0.45 - 1.05 0.9 0.6 0.9 3.6 0.2 0.45 - 1.05 2.2 0.6 0.9 0.4 3.5 0.3 - 0.8 6.6 0.5 0.6 8.6 5.3
SENsORs
MICRO-sIGNAL sWITCHEs
ECO
Changeover switch with OFF position in the center (SPDT momentary - Center OFF)
PUsHNDRIVE
1017.0153
9.2 long
Au
2.1
0.5
1E6
\ 212
Stock version
Terminal type
ROCKEr SWITCHEs
5 1.25 3.7 1.2 4.2 1 8 3.3 4.5 1.75 RL 1.15 MP 17.8 0.5 4.25 2.1 5 9.5 5.8 5 2
4.8 5.5
15 10 90
5 2.1
1
1
15 10 60 6.5
7.5 4.2
1.78
.78
14.5 RL
2.2
4.8 1
3.3 4.5
5 2.5 2.1
15.5 10 5 3.5
1.78
5.5
8 3.3 4.5
15 10 90 9.5
1.78
14 RL
2.2
FP OP TP
TO 6 (2) A 250 V AC
213 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
ROCKEr SWITCHEs
OP
TP
PUsHBUTTON SWITCHEs
13.75
11.2 0.6 11.8
<13.8
3.5
RL
1 2.5 2.5
TOGGLE SWITCHEs
3.5
9.9
FP
19.5
A switch actuation vertical to the PCB can be implemented in a conned space with this version.
Vertical PCB terminal: According to the same functional principle as basic type 1010, but in smaller size. This basic type is designed for low voltages and has no approval mark.
2.8 TP OP FP
SLIDE SWITCHEs
5.5 RL
3.5 7.4
1.6
FOOT sWITCHEs
4.5
1.8
9.2
14.5
0.15
7.5 5 4.7
14.5
RL
15
10
6.8
2.5 0.5
3.5
2.1
2.6
1.4
1.5
6.8
4.3
2.5
2.5
4.2
SNAP-ACTION sWITCHEs
MICRO-sIGNAL sWITCHEs
9.25 6
15 10 6 90
14 MP 1
4.2 0.5
0.1
2.1
5 1.6
2.6
9.2 5
3
SENsORs
\ 214
PUsHNDRIVE
ECO
0.5
OG TP
4.8
9.2
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Contact distance Approval marks
20E4 > 100 MOhm (500 V DC) 250 PTI -40 C ... +85 C UL 94 (socket, lever: V-0, actuator: V-2) 850 C PA glass ber-reinforced / PA PA glass ber-reinforced silver plated > 3 mm
7/1
TACT AND KEY sWITCHEs
housing variants / 4
Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side
215 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
FOOT sWITCHEs
Snap-action switches with and without housing Contact distance > 3 mm Normally open contact and normally closed contact version
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
SLIDE SWITCHEs
1019.5501 1019.5601
Terminal type
ROCKEr SWITCHEs
2.8
Ag Ag Ag
2.4 0.6 2.4 0.6 2.4 0.6 6.3 0.8 2.4 0.6 6.3 0.8
FOOT sWITCHEs
Ag Ag Ag
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
www.marquardt-switches.com
\ 216
10.8 5 2.1
15
7.5 5 2.1
15
15 10
15
10
2.4
6.5
17.5
2.4
2.1
2.1
17.5
Solder terminal
TOGGLE SWITCHEs
5 5 2.1
15 1.3+0.1
10
15
7.5
10
2.4
OP
TP
FP
10.8 2.1 5
28 6.3 0.8
RL 15 10
30.8
4.7
15 RL 15 10 2.9
2.4 0.6
10.8
18.7
2.7
3 5
OP
TP
FP
2.7
30.8 5 PUSHNDRIVe
217 ]
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
OP
TP
FP
2.4
2.1
FOOT sWITCHEs
10.5
ROTARY sWITCHEs
17.5
SLIDE sWITCHEs
3.5
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
Dust and water protection actuator and terminal side Ice-proof lever bearing Small size, large travels High switching reliability due to great contact forces directly after switching Series with different fastening possibilities
ON REQUEsT
FOOT sWITCHEs
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Material actuator additional actuator housing Bounce time Contact distance Contact material Terminal description
10E4 < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 67 -40 C ... +85 C UL 94 V-2 POM / silicone rubber stainless steel spring steel PBTP < 5 ms < 3 mm gold plated 500 mm long (terminal wires 0.5 mm molded with switch, tinned wire ends)
\ 218
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
1 pin right side adjustable operating position by top side metal eye 2 1 pin left side adjustable operating position by top side metal eye 2
3.05 1 4 2 12.3 4 2
(24)
FP
20
20 3.95
45 5 3.2
TP
FP
12
12 0.05
2.95
6.9
4.6
30
3 +0.05 tk
21 4 2
21 4 1 2
OP 13.4 0.9
11.6
15.5
14 4.15 28.6
14 4.15 28.6
3.95 20
3.95 20
4.5
L21: simulated roller lever, on centering pin and a metal eye. With the elongated hole fastening the switch can be swiveled around the pin and then xed with a screw. This makes the operating position adjustable by 2 mm.
219 ]
PUSHNDRIVe
ECO
SENsORs
4.5
MICRO-SIGNAL sWITCHEs
TP
6.4
0.5
ad 2
FP
0.5
6.4
SNAP-ACTION SWITCHES
FOOT sWITCHEs
4+0.05
2 12 14
OP 10.5 0.8
13.2
8.8
12.3
12
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
Double interrupting jump contact switching system Contact distance > 3 mm Material conformant with the lament wire test acc. to IEC 60 335-1:2001 chap. 30 and UL 94 V-0 Large overtravel Actuator can be approached from all directions Normally open contact and normally closed contact versions
ON REQUEsT
FOOT sWITCHEs
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Contact material Contact distance Approval marks
10E4 < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 -40 C ... +85 C UL 94 V-0 850 C PA glass ber-reinforced PA glass ber-reinforced silver plated Ag 3 mm
7/1/4
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side
ECO
\ 220
PUsHNDRIVE
1117.0106
1117.0206
<15.2
6.3
6.3
30 22 6 4.3 6 30
Terminal description
3.5 0.5
3.5 0.5
10 13 6.3-0.8
TO 16 (6) A 400 V AC
221 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
Double lifting contact system Contact distance > 3 mm Actuator can be approached from all directions Normally open-, Normally closed- and combined (changeover) version
ON REQUEsT
FOOT sWITCHEs
10E4 < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 -40 C ... +85 C UL 94 V-0 850 C PA glass ber-reinforced PA glass ball reinforced , black, ultrasonic welded silver plated Ag > 3 mm < 3 mm
7/1
Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing terminals Contact material Contact distance Approval marks
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
SENsORs
(product-dependend) / 4
Suitable for appliances of protection class II under compliance with the installation conditions required on the equipment side
\ 222
PUsHNDRIVE
ECO
30 22 5
6 18 23.2 6 4.3
6.3
6.3
6.3
Terminal description
>3
10
13
<3
>3
6.3-0.8
6.5 1.0
6.0 0.5
6.0 0.5
Difference travel max. (mm) Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Stock version TO 16 (4) A 400 V AC
223 ]
PUSHNDRIVe
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION SWITCHES
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
www.marquardt-shop.com
MIcRO-SIGNAL SWITcHEs
ROCKEr SWITCHES
ROCKER sWITCHEs
PUsHbUTTON SWITCHEs
TOggLE SWITCHEs
SLIDE SWITCHEs
ROTARY sWITCHEs
FOOT sWITCHEs
SNAp-ACTION sWITCHEs
mICRO-sIgNAL sWITCHEs
SENsORs
ECO
PUsHNDRIVE
225 ]
PUSHNDRIVe
ECO
SENsORs
MICrO-SIGNAL SWITCHES
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
\ 226
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTARY SWITCHEs SLIDE SWITCHEs TOGGLE SWITCHEs PUsHBUTTON SWITCHEs ROCKEr SWITCHEs
PUsHNDRIVE
ECO
SENsORs
MICrO-sIGNAL sWITCHEs
SERIEs 1065
MIcRO-SIGNAL SWITcHEs
Redundant contact system for high switching reliability by double contacting Self-cleaning contact system due to wiping contacting Center-zero version (basic type 1075) for detecting 3 switching positions Noiseless switching system Large overtravel
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Protection type Ambient temperature Flammability Material actuator additional actuator housing terminals Contact material Shock resistance Miscellaneous
200E3 < 500 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) IP 00 terminal side basic types 1065 and 1075 IP 67 actuator side all basic types, terminal side basic type 1068 -40 C ... +85 C UL 94 HB POM / silicone rubber stainless steel spring steel PBTP tinned AuCo terminal side sealed electrical life endurance at 14 V DC 10 mA 200E3, at 30V DC 100 mA 40E3 50 g
227 ]
PUSHNDRIVe
ECO
SENsORs
MICrO-SIGNAL SWITCHES
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
Other fastening pins Other lever forms Customized cable assembly Diagnosis capable versions
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
SLIDE SWITCHEs
coded cranked 300 long 300 long 300 long coded cranked
1.6 1.6 1.6 1.6 1.6 2.2 2.2 2.8 2.2 1.6 1.6
9.45 0.3 9.45 0.3 13.8 0.3 9.45 0.3 9.45 0.3 9.65 0.45 12.75 0.65 9.65 0.45 17.1 0.65 9.45 0.3 9.45 0.3
8.95 0.3 10.15 6.85 8.95 0.3 10.15 6.85 13.3 0.3 14.5 11.2 8.95 0.3 10.15 6.85 8.95 0.3 10.15 6.85 9.15 0.45 11.35 7.35 12.05 0.65 14.7 9 L02 L21 L31 L21
pin both sides 5 long pin both sides 2.5 long without pin pin both sides 2.5 long pin both sides 2.5 long pin both sides 5 long pin both sides 2.5 long pin right 5 long without pin pin both sides 5 long pin right 2.5 long
FOOT sWITCHEs
9.15 0.45 11.35 7.35 16.4 0.65 19.05 13.35 8.95 0.3 10.15 6.85 8.95 0.3 10.15 6.85
SNAP-ACTION sWITCHEs
Changeover switch with OFF position in the center (SPDT momentary - Center OFF) 1075.0603 1075.2000 1075.3603 1075.3653
coded cranked 1.6 1.6 1.6 1.6 9.45 0.3 8.3 - 9.15 8 0.3 10.15 6.85 pin both sides 2.5 long without pin pin right 2.5 long pin left 2.5 long
MICrO-sIGNAL sWITCHEs
13.8 0.3 12.65 - 13.5 12.35 0.3 14.5 11.2 9.45 0.3 9.45 0.3 8.3 - 9.15 8.3 - 9.15 8 0.3 8 0.3 10.15 6.85 10.15 6.85
\ 228
PUsHNDRIVE
ECO
SENsORs
3.6 0.2
1.9
FP
OP NC
OP NO
TP
1.8
Solder terminal
PCB terminal
TOGGLE SWITCHEs 3.75 1.3 -0.08 0.5 1.5 5.6 0.25 0.5 0.2 x 45
0.9 3.8
9 0.05 3.5
5.6
1.3 +0.1
TH: 1.3
5.8
3.23 0.2
5 0.05
9 0.05
0.2 x 45
3.5
3.1-0.08
5 0.05
5 0.05
1.9
5.4 5
2.95 9
0.7
229 ]
PUSHNDRIVe
ECO
SENsORs
MICrO-SIGNAL SWITCHES
8.3
SNAP-ACTION sWITCHEs
1.3 +0.1
3.23
FOOT sWITCHEs
SLIDE sWITCHEs
PUSHBUTTON SWITCHES
3.23 -0.08
+0.05
2.8 0.2
0.5
11.2
.5 1
ROCKEr SWITCHEs
PUsHBUTTON SWITCHEs
Integrated resistors feature a circuit monitoring (short circuit, cable break, bad plug contatcs)
TOGGLE SWITCHEs
SLIDE SWITCHEs
13
1.9
5.4
FOOT sWITCHEs
2.5
0.7
Due to the OFF range between the normally closed contact and the normally open contact increased in relation to basic type 1065 the switch can be used for determining three switching positions. As a result two conventional switches can be replaced by one of these new switch versions in many applications.
3.23
FP 11.35
SNAP-ACTION sWITCHEs
Auxiliary actuators
MICrO-sIGNAL sWITCHEs
SENsORs
\ 230
PUsHNDRIVE
ECO
140.092.021 Fastening disc for the basic types 1065, 1068 and 1075 The fastening disc offers a fast, reliable fastening possibility in combination with switches with 5 mm long pins on plates or plastic parts with a wall thickness of up to 2.5 mm. Additional parts
231 ]
PUSHNDRIVe
ECO
SENsORs
MICrO-SIGNAL SWITCHES
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
www.marquardt-shop.com
SENSORs
ROCKEr SWITCHES
ROCKER sWITCHEs
PUsHbUTTON SWITCHEs
TOggLE SWITCHEs
SLIDE SWITCHEs
ROTARY sWITCHEs
FOOT sWITCHEs
SNAp-ACTION sWITCHEs
mICRO-sIgNAL sWITCHEs
sENsORs
ECO
PUsHNDRIVE
233 ]
PUSHNDRIVe
ECO
SENSOrS
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SERIEs 2061
Flow sensors for water volumes up to 15 l/min
SENSORs
ROCKEr SWITCHEs
PUsHBUTTON SWITCHEs
SERIEs 2066
Analogue pressure sensors for water and air pressure measurement up to 10 bar
\ 234
PUSHNDRIVE
ECO
SENsOrs
MICRO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
FOOT SWITCHES
ROTARY SWITCHES
SLIDE SWITCHES
TOGGLE SWITCHES
Robust ywheel ow meter for water with electrical pulse output Wide measuring range with 2 - 15 l/min Scanning by magnetic eld sensor Enables hot/cold, water and energy saving as well as quality improvement Excellent linearity EMC protected
Medium Measuring range Life endurance Bursting pressure Accuracy / tolerance Material housing Ambient temperature Sensor description Power supply Output current Output signal Pulse Approval marks
water 2 ... 15 l/min 200 m 8 bar 2 ... 4 l/min 5%, 4 - 15 l/min 3% POM +5 C ... +70 C pressure drop at 10 l/min: < 0.4 bar 3.8 ... 24 V DC (for Hall sensors variants) 0 ... 20 mA 200 3% pulses / liter min. pulse width 1 ms break ratio (Hall sensor) symmetrical
1/4
235 ]
PUSHNDRIVe
ECO
SENSOrS
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
Hall or reed contact Optimized measuring ranges for different application areas Optional: different pulse/liter ratios Increased life endurance Spray water protection for electronics
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
\ 236
SNAP-ACTION SWITCHES TACT AND KEY SWITCHES FOOT SWITCHES ROTARY SWITCHES SLIDE SWITCHES TOGGLE SWITCHES PUsHBUTTON SWITCHEs ROCKEr SWITCHEs
PUSHNDRIVE
ECO
SENsOrs
MICRO-SIGNAL SWITCHES
2061.1202
2061.1201
Power supply
15 34.05
Terminal type
Terminal description
Miscellaneous
Stock version
Medium
heating water air water 0-4.5 bar / 0-65 psi / 0-450 kPa 0-10 bar / 0-145 psi / 0-1 MPa > 9 bar / 130 psi / 0.9 MPa > 42 bar / 609 psi / 4.2 MPa (10 bar version) +2 C ... +90 C -40 C ... +90 C -10 C ... +70 C maximum current consumption < 14 mA (12 mA typ.)
Measuring range Bursting pressure Medium Storage Ambient temperature Sensor description
237 ]
PUSHNDRIVe
ECO
SENSOrS
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
Magnetic pressure sensor with analogue output Long life endurance Robust and simple structure Linear measuring range Fully automatic 100 % test and adjustment Versions can be used for drinking water
Different measuring ranges Adaptation of the output voltage Supply voltage variants Integrated digital switching output Other electrical / mechanical adaptation
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
TOGGLE SWITCHES
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
SLIDE SWITCHES
ROTARY SWITCHES
FOOT SWITCHES
2066.3101 2066.3102
ECO
SENsOrs
MICRO-SIGNAL SWITCHES
SNAP-ACTION SWITCHES
www.marquardt-switches.com
\ 238
7.8
11.2
49.19
28.8
18.24
55.39
G 3/8
G3/8 14.7 10
239 ]
PUSHNDRIVe
SENSOrS
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
www.marquardt-shop.com
ECO
ROCKEr SWITCHES
ROCKER sWITCHEs
PUsHbUTTON SWITCHEs
TOggLE SWITCHEs
SLIDE SWITCHEs
ROTARY sWITCHEs
FOOT sWITCHEs
SNAp-ACTION sWITCHEs
mICRO-sIgNAL sWITCHEs
SENsORs
ECO
PUsHNDRIVE
241 ]
PUSHNDRIVE
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SERIEs 1550 ECO
Single-pole rocker switches to 10 (4) A 250 V AC 1E4
ECO
ROCKEr SWITCHEs
PUsHBUTTON SWITCHEs
\ 242
PUsHNDRIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY SWITCHEs
SLIDE SWITCHEs
TOGGLE SWITCHEs
Mechanical life endurance Contact distance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator housing Plug force of the terminals Approval marks Suitable for appliances of protection class II
5E4 3 mm < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 terminal side -20 C ... +85 C actuating side -20 C ... +55 C UL 94 V-2 850 C PA PA
7/2
243 ]
PUSHNDRIVE
ECO
80 N
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
Automatic switching off with exible timer 4s - 71 h (auto-off) Automatice switching off with signal from the end device (remote-off) 100 million times proven switching principle Symmetric actuation characteristic Compact, one piece solution High design variety Auto-off version with intelligent current detection Energy neutral through total single-pole galvanic separation - Zero-Watt Stable, automatic snap-in from the back
Other colors Other printing variants Other shut off times Other lamp variants Other installation method Other terminal types Other trigger types Higher electrical rating
FOOT sWITCHEs
ROTARY sWITCHEs
PRODUCT FEATUREs
ON REQUEsT
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
PUsHBUTTON SWITCHEs
single-pole
TOGGLE SWITCHEs
SLIDE SWITCHEs
Terminal type
ROCKEr SWITCHEs
auto-off-function auto-off time: t = 15 min. auto-off-function auto-off time: t = 15 min. remote-off function standard switch without ECO function remote-off function standard switch without ECO function
ROTARY SWITCHEs
FOOT sWITCHEs
1551.1902
25.8 18 30 15
26.3 14
25.8 18 30 15
26.3 14
22
9.5
SNAP-ACTION sWITCHEs
9.5
1a 1b 15 5
MICRO-sIGNAL sWITCHEs
22
9.5
9.5
SENsORs
22
22 1a 1b
1c
15 5
\ 244
PUsHNDRIVE
ECO
Installation frame with ange and latching from the front side
46.7 1.6 22.4
22.1
43.6
19.8
245 ]
PUSHNDRIVE
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
Holder clamp made of metall as installation alternative. Switch is delivered with attached clamps.
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
ROTARY SWITCHEs
PRODUCT FEATUREs
Automatic switching off with signal from the end device (remote-off) Version with auxiliary contact for a delayed shut-off by the end device 100 million times proven 1080 snap-action switching system Compact, one piece solution Variable actuator design with holder Energy neutral through total single-pole galvanic separation - Zero-Watt
ON REQUEsT
Other terminal variants Customized actuators Cable assembly Higher electrical ratings
FOOT sWITCHEs
SNAP-ACTION sWITCHEs
Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) Proof tracking Protection type Ambient temperature Flammability Glow wire test temperature Material actuator additional actuator housing terminals Approval marks Operating force
20E4 < 100 mOhm (1 A 12 V DC) > 100 MOhm (500 V DC) 250 PTI IP 40 -40 C ... +85 C UL 94 V-0 850 C PA stainless steel PA silver plated
7/2
SENsORs
MICRO-sIGNAL sWITCHEs
2.5 N
\ 246
PUsHNDRIVE
ECO
1086.3101 single-pole
1086.3201
Ag
Ag
27 30
2.8-0.5 4.8-0.8 6.3-0.8
4.6 13.5
2.5
2.5
16 12
Free position (FP) max. (mm) Operating position (OP) (mm) Permissible total travel position (mm)
11.4 13.5
Miscellaneous
16 12
Quick-connect terminal 2.8 x 0.5, 4.8 x 0.8, 6.3 x 0.8 Socket (2.0 mm) for auxiliary contact 1086.3201
Stock version
247 ]
PUSHNDRIVE
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
ROCKEr SWITCHES
www.marquardt-shop.com
PUSHNDRIVe
ROCKEr SWITCHES
ROCKER sWITCHEs
PUsHbUTTON SWITCHEs
TOggLE SWITCHEs
SLIDE SWITCHEs
ROTARY sWITCHEs
FOOT sWITCHEs
SNAp-ACTION sWITCHEs
mICRO-sIgNAL sWITCHEs
SENsORs
ECO
PUsHNDRIVE
249 ]
PUSHNDrIVE
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
ROTARY sWITCHEs
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
\ 250
SNAP-ACTION sWITCHEs TACT AND KEY sWITCHEs FOOT sWITCHEs ROTARY SWITCHEs SLIDE SWITCHEs TOGGLE SWITCHEs PUsHBUTTON SWITCHEs ROCKEr SWITCHEs
PUsHNDrIVE
ECO
SENsORs
MICRO-sIGNAL sWITCHEs
SERIEs 3450
PUSHNDRIVe
Operating voltage Sleep current Operating temperature Frequencies Mechanical life endurance Mating connector ECU Range Interfaces Security Outputs
8 16 V DC < 100 A -40 C +85 C LF 21.85 KHz (ECU to key) RF 433.92 MHz (key to ECU) MTBF 15 years; Key battery life: 5 years (battery changeable) Tyco 6385185 sealed 12 pins Adjustable up to 4 meters CAN HITAG 2 High-side Driver 0.4 A continuous 2 Relays (NO and NC): - 25 A max. carrying current for 10 minutes - 30 A max. switching current CAN 2 Wire Hardwire Momentary switch (start/stop input)
IP 65 and IP 67
251 ]
PUSHNDrIVE
ECO
SENsORs
MICRO-SIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
Keyless start of vehicles (keyless) PushnDrive Generally available off-the-shelf system System outputs congurable over CAN-Bus Simple adaption with hardwired outputs PushnDrive using HITAG2 encryption for information exchange between key and ECU Simple integration with no additional tooling and development costs Good price-performance ratio Proven Marquardt technology with numerous premium car companies
FOOT sWITCHEs
With keyless-entry-function 24 V-version Customer specic key fob Solution for eet management Remote keyless-entry-function
ROTARY sWITCHEs
PRODUCT FEATURES
ON REQUEST
SLIDE sWITCHEs
TOGGLE SWITCHEs
PUSHBUTTON SWITCHES
ROTARY SWITCHEs
SLIDE SWITCHEs
TOGGLE SWITCHEs
PUsHBUTTON SWITCHEs
ROCKEr SWITCHEs
Field strength
MICRO-sIGNAL sWITCHEs
SNAP-ACTION sWITCHEs
FOOT sWITCHEs
Circuit
SENsORs
20.5
73
94.4
ECO
58
PUsHNDrIVE
42.6
128.5 145.65
\ 252
93.3
33.1
39 10
PART NUmbERS
Part Stock PU / Page number version Piece* 0100.1201 0100.2901 250 250 139 139 94 94 131 131 204 203 204 204 203 203 202 203 202 203 202 203 202 202 202 202 202 202 202 202 203 202 203 203 203 203 203 203 203 204 203 204 202 204 204 212 212 212 212 212 212 212 212 212 212 212 212 212 212 212 212 212 212 212 212 212 212 Part Stock PU / Page number version Piece* 1017.0851 1017.5701 1019.0101 1019.0201 1019.0301 1019.2101 1019.5101 200 400 1019.3101 1019.5401 1019.5501 1019.5601 400 1022.0101 1022.2201 1022.4501 1040.0111 1040.0114 200 250 250 1022.4502 212 212 216 216 216 216 216 216 216 216 216 219 219 219 219 210 210 210 190 190 Part Stock PU / Page number version Piece* 1050.2151 1050.2202 1050.3102 1050.4102 1050.5202 1050.5305 1050.5702 1050.6702 1050.7202 500 500 500 500 400 400 400 400 400 184 184 184 184 184 184 184 184 184 184 179 179 179 179 179 179 179 179 179 179 179 179 179 179 179 179 179 179 179 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 198 198 198 198 198 198 198 198 198 198
PUSHNDRIVE ECO SENSORS TACT ANd KEY SWITCHES FOOT SWITCHES ROTARY SWITCHES SLIdE SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES
0344.0102 0344.0201 0350.0101 1004.0402 1004.1002 1005.0101 1005.0401 1005.0404 50 500 400 400 500 500 0350.2101 1004.0509 1004.4601
1050.2403
184
1050.5251
184
1050.7702 1055.0552 1055.2061 1055.2351 1055.3653 1055.3654 1055.5155 1055.5350 1055.8155 1056.0351 1056.2351 1056.3060 1056.3065 1056.3351 1056.3352 1058.0351 500 1058.0373 1058.0395 1058.0553 1058.0593 1058.0653 500 1058.5253 1060.2601 1065.0503 1065.0603 1065.2000 1065.3603 1065.3653 1065.5000 1065.5103 1065.5203 1065.7100 1068.0503 1068.0541 1068.0601 1075.0603 1075.2000 1075.3603 1075.3653 1080.0103 1080.0203 1080.0304 1080.0403 400 1080.0440 1080.0464 1080.0539 1080.0585 1080.0903 1080.5906 1085.0103 1085.0342
1005.0507 1005.0904 1005.1001 1005.1004 1005.1101 1005.1105 1005.1204 1005.1207 500 400 400 400 400 400
1005.1010
1005.1201
179
1045.0151 1000 190 1045.0903 1000 190 1045.1103 1000 190 1045.1151 1000 190 1045.1943 1045.2101 190 190
1045.2251 1000 190 1045.2702 1000 190 1045.3102 1000 190 1045.3151 1000 191 1045.4102 1000 191 1045.4151 1000 191 1045.5102 1000 191 1045.5112 1000 191 1045.5502 1000 191 1045.5512 1000 191 1045.6102 1000 191 1045.6502 1000 191 1045.7102 1000 191 1045.7502 1000 191 1046.0104 1000 191 1046.1103 1000 191 1046.2904 1000 191 1048.0151 1000 191 1048.1102 1000 192 1048.1132 1000 190 1048.2151 1000 192 1048.6113 1000 192 1050.0102 1050.0103 1050.0122 1050.0151 1050.0202 1050.1102 1050.1122 1050.1151 1050.1202 1050.2102 500 500 500 500 500 500 500 500 500 500 184 184 184 184 184 184 184 184 184 184 184 184 184 184
1006.1011 1006.1101 1006.1201 1006.1301 1006.1401 1006.1511 400 250 200 200
179
1006.1801 1006.3402 1006.4103 1006.4203 1010.0101 500 1010.0304 1010.2003 1010.3001 1010.4103 1010.6002 1010.6003 500 270 270 1010.4402
228
1010.7102 1010.7172 1010.7352 1010.7401 1010.7402 1010.7601 1010.8102 1010.9705 1010.9752 1010.9802 1010.9852 400 1014.6151 1017.0153 1017.0801 * Minimum packaging units 250
1050.0802
198
1050.1142
198
1050.1426 1050.2122
253 ]
MICRO-SIGNAL SWITCHES
SNAp-ACTION SWITCHES
1006.1514
PART NUmbERS
Part Stock PU / Page number version Piece* 1085.0375 1085.0403 400 1086.3101
PUSHBUTTON SWITCHES
ROCKER SWITCHES
198 198 247 247 223 223 223 221 221 147 147 111 111 111 111 244 244 244 244 244 244 51 51 51 244 244 51 51 51 51 51 51 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 51 76 76 121 121 121 121 121 121 121
1086.3201 1115.0101 1115.2101 1115.4101 1117.0106 1117.0206 200 200 200 500 500
1801.1148 1801.1151 1801.1202 500 1801.1302 1801.1303 1801.1403 1801.1908 1801.2106 400 500 500 1801.1520 1801.1926 1801.2202 1801.2402 1801.2702 1801.5102 1801.6101 1801.6102 1801.6115 1801.6122 1801.6222 1802.1101 1802.1102 1802.1108 1802.1121 1802.1123 1802.1221 1802.2102 1802.2104 1802.3102 1802.5103 1802.6123 1803.1102 1803.1202 1803.2102 1803.6102 1803.6222 1804.1102 150 500 500 500 500 500 250 250 250 250 250 250 250 250 250 200 500 500 500 500 500 500 250
TOGGLE SWITCHES
SLIdE SWITCHES
1550.1902
120
ROTARY SWITCHES
1801.6130
FOOT SWITCHES
1551.2654 1551.3102 100 1551.3103 1551.3106 1551.3202 1552.0102 1552.2602 1552.3102 1552.3112 1552.3602 1552.4602 100 100 100 100 100 100 100
1551.3702 1552.2601
1802.2504 1802.3311
SNAp-ACTION SWITCHES
1552.3104 1552.3117
MICRO-SIGNAL SWITCHES
1555.3109 1555.3111 1555.3120 1555.3125 1555.3604 1555.4608 1555.8104 1581.1303 1656.1703 1656.1723 1660.0201 1660.0202 100 100
SENSORS
1805.6102 1805.6108 1805.7104 1805.7109 1805.7110 1805.7118 1806.1102 250 250 250 500 250
ECO
1660.0222
PUSHNDRIVE
1805.7112
1806.1602 1806.6108
\ 254
PART NUmbERS
Part Stock PU / Page number version Piece* 1808.1101 1808.1102 1808.1103 500 500 24 24 24 24 25 24 25 25 25 25 25 25 25 25 25 27 27 28 28 133 133 133 133 133 133 133 133 133 133 133 136 136 136 136 136 136 136 136 136 136 136 57 57 57 57 57 58 58 57 57 57 58 57 57 57 57 57 57 58 61 61 60 61 Part Stock PU / Page number version Piece* 1832.3311 1832.3312 1832.3313 100 100 100 60 60 60 61 61 61 61 61 61 61 58 59 58 58 59 62 62 62 61 61 63 62 62 60 60 60 60 60 60 60 60 60 60 61 59 60 58 58 58 58 58 59 59 58 59 59 63 62 62 62 62 62 62 62 62 63 63 63 63 62 63 63 117 Part Stock PU / Page number version Piece* 1841.1201 1841.1301 250 250 117 117 117 117 117 117 115 115 115 115 43 43 43 43 43 43 43 43 46 46 46 46 46 46 46 46 46 46 39 39 39 39 39 39 39 39 39 39 39 37 19 19 19 19 19 19 19 71 71 72 72 72 72 72 72 72
PUSHNDRIVE ECO SENSORS TACT ANd KEY SWITCHES FOOT SWITCHES ROTARY SWITCHES SLIdE SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES
1808.1112 1808.1152 1808.1202 1808.1302 1808.2102 1808.2302 1808.6102 1808.6103 1808.6302 1809.1102 1809.1302 1811.1102 500 500 500 500 500 500 500 250 250 400
1832.3407 1832.3602 1832.6112 1832.7103 1832.8112 1832.9101 1832.9103 1833.1102 1833.3307 200 200 1833.1202 1833.3312 1833.3402 1834.1102 1834.3302 1834.3309 1834.3312 1834.3402 100 100 100 100
117
1808.1353
1846.0204 1846.2201 1846.2251 1846.3201 1855.0102 1855.0108 1855.1102 1855.1104 1855.1108 400 400 400 400 400 400
115
1808.2704
1808.6202
1809.1202 1809.2102 1811.1202 1812.1102 1813.1102 1818.1102 1818.1202 1818.1302 400 400 400 400 1814.2102
1855.1115 1855.1118 1855.1122 1855.1124 1858.0103 1858.1102 1858.1103 300 300 800 1858.0104
1834.3311
43
1834.3603 1834.6103 1835.3102 1835.3105 1835.3108 1835.3112 1835.3114 1835.3118 150 150 150 150 150 150
1835.3107 1835.3111
1858.1104 1858.1105 1858.2202 1858.4202 1858.4205 1881.1103 1881.1104 1881.1105 300 200 200 500 500 500 1858.2204
1818.2302 1819.1102 1819.1302 1821.1101 1821.6101 1822.1101 1823.1101 1824.1101 1828.1101 1828.1301 200 250 250 125 250 125 250 250
1835.3116 1835.3419 1835.3802 1835.3902 1835.9413 1838.0305 1838.1402 1838.1502 1838.1509 1838.1602 1838.3402 1838.3502 1838.3901 250 250 250 250 250 250 200
46
1858.9202
1823.6101
1881.1106 1881.1108 1881.1109 1881.1111 1881.1112 1881.1209 1883.1105 1883.1106 1890.1104 1901.1102 1901.1103 300 300
1828.1201 1829.1101 1829.1301 1830.0102 1830.3112 1830.3118 1831.1107 1831.1202 1831.3311 1831.3312 1831.3313 1831.3402 200 200 200 200 200 200 200 200
1831.0114
1901.1106 1901.1152 1911.1102 300 1911.1104 1921.1101 1921.1102 1932.3112 300 100 1932.1113 1932.3113 1932.3114 1932.3116 1932.3118 1932.3130 1932.3131 1932.3132 1932.3136 1932.3137
1831.1253
19
1839.1410 1839.1502 1839.1507 150 1839.1509 1839.1518 1839.1602 1839.3352 1839.3402 1839.3502 150 150
1831.3606 1831.3607 1831.3815 1831.3816 1831.3933 1831.8112 200 1831.8202 1832.0113 1832.1102 1832.3307 * Minimum packaging units 100 100 1832.1612
71
72
255 ]
MICRO-SIGNAL SWITCHES
SNAp-ACTION SWITCHES
LAmPS
Part Stock PU / Page number version Piece* 1932.3312 1932.3314 1932.3412
PUSHBUTTON SWITCHES
ROCKER SWITCHES
72 72 72 72 73 73 73 71 71 71 71 71 71 71 71 71 71 71 71 72 73 73 73 73 73 73 49 49 49 49 236 238 238 238 238 238 238 238 238 238 156 156 156 156 156 159 159 159 159 159 159 173 173 164 164 164 164 164 164 164 164 164 164
1932.3413
100
1934.2114 1934.3112 1934.3114 1935.3112 1935.3113 1935.3114 1935.3118 100 100 100 100
TOGGLE SWITCHES
4021.1203
SLIdE SWITCHES
4024.0501 4024.4601 5000.0101 5000.0103 5000.0104 5000.0211 5000.0501 6425.0101 6425.1101 6425.3111 6425.3131 6425.4111 6425.4121 6425.4131 6425.5111 6425.5131 250 250 250 250 250 400 400 400 400 400 400 400 400 400
ROTARY SWITCHES
5000.0212
1939.3318
FOOT SWITCHES
1941.1102 1941.1103 1941.1105 1941.1203 2061.1202 2066.2102 2066.2103 2066.2104 2066.2105 2066.2106 2066.2107 2066.2112 2066.3101 2066.3102 2410.0101 2410.0301 2410.0401 2410.0501 2410.1001 2420.0101 2420.0102 2420.0301 2420.0501 2420.4101 10 10 10 10 12 12 12 12 6
6425.3121
6425.6111 6425.6131 6450.0001 6450.0003 6450.0005 6450.0006 400 400 400 400
SNAp-ACTION SWITCHES
MICRO-SIGNAL SWITCHES
Lamps
1667.0101 1667.0102 1677.5306 1677.5308 1806.1508 1807.1102 1807.1108 500 500 122 122 126 126 30 30 30 30 30 64 64 64 64 79 79 79 79
SENSORS
1807.1126 1807.6103 1837.1118 1837.3102 1837.8102 1837.8108 3237.0102 3237.0104 3237.0106 3237.0108
ECO
PUSHNDRIVE
\ 256
AccESSORIES
Part Description number 190.059.013 Parallel guide for double key caps, pitch 16 mm 190.059.023 Parallel guide for double/ triple key caps, pitch 16/19 mm 190.072.013 Auxiliary actuators, L43: adjustable roller lever 190.074.013 Auxiliary actuators, L45: adjustable simulated roller 190.075.013 Auxiliary actuators, L41: adjustable plastic lever 190.372.041 Auxiliary actuators, L32: simulated roller, mounted on NC side 190.389.011 Rocker without stop 190.389.021 Rocker with stop 191.013.013 Stainless spring steel 191.071.011 Auxiliary actuators, L01: straight lever 191.071.021 Auxiliary actuators, L02: straight lever 191.071.021 Auxiliary actuators, L02: straight lever, mounted on NC side 195 191.071.041 Auxiliary actuators L21: simulated roller 191.071.051 Auxiliary actuators, L22: simulated roller 191.071.051 Auxiliary actuators, L22: simulated roller, mounted on NC side 195 191.071.101 Auxiliary actuators, L03: straight lever 191.078.013 Auxiliary actuators, L11: roller lever 191.078.023 Auxiliary actuators, L12: roller lever 191.078.023 Auxiliary actuators, L12: roller lever, mounted on NC side 191.079.013 Auxiliary actuators, L11: roller lever 191.079.023 Auxiliary actuators, L12: roller lever 191.080.091 Auxiliary actuators, L01: straight lever 191.080.101 Auxiliary actuators, L02: straight lever 191.080.451 Auxiliary actuators, L21: simulated roller 191.080.471 Auxiliary actuators, L22: simulated roller 191.081.011 Auxiliary actuators, L31: differential lever 191.081.031 Auxiliary actuators, L21: simulated roller 191.081.041 Auxiliary actuators, L02: straight lever 203.007.013 Dummy piece 203.007.023 Dummy piece V0 material 203.020.013 Dummy piece 203.028.013 Dummy piece 203.069.013 Dummy piece 203.078.011 Predection cap 182 35 35 127 123 80 69 182 182 200 200 200 200 200 200 195 188, 195 188, 195 188, 195 188, 195 188, 195 188, 195 188, 195 196 80 80 208 188, 196 188, 196 188, 196 169 169 Page Part Description number 203.086.013 Dummy piece 203.089.011 Predection cap 203.090.011 Predection cap 203.103.013 Dummy piece 203.105.011 Lever receptacle black 203.105.016 Cap design 1 black, 1 light guide 203.105.021 Lever receptacle white 203.105.026 Cap design 1 black, 2 light guide 203.105.031 Lever receptacle red 203.105.036 Cap design 1 red, 1 light guide 203.105.041 Lever receptacle green 203.105.046 Cap design 1 red, 2 light guide 203.106.011 Pushbutton 203.106.016 Cap design 1 black, 1 light guide 203.106.026 Cap design 1 black, 2 light guide 203.106.036 Cap design 1 red, 1 light guide 203.106.046 Cap design 1 red, 2 light guide 203.107.016 Cap design 1 lock 1, bl.; no light. g. 203.107.026 Cap design 1 lock 2, bl.; no light g. 203.107.036 Cap design 1 lock 3, bl.; no light g. 203.107.046 Cap design 1 lock 1, bl.; 1 light g. 203.107.056 Cap design 1 lock 2, bl.; 1 light g. 203.107.066 Cap design 1 lock 3, bl.; 1 light g. 203.107.076 Cap design 1 lock 1, red; no light. g. 203.107.086 Cap design 1 lock 2, red; no light. g. 203.107.096 Cap design 1 lock 3, red; no light. g. 203.107.106 Cap design 1 lock 1, red; 1 light. g. 203.107.116 Cap design 1 lock 2, red; 1 light. g. 203.107.126 Cap design 1 lock 3, red; 1 light. g. 203.108.016 Cap design 1 lock 1, bl.; no light g. 203.108.026 Cap design 1 lock 2, bl.; no light g. 203.108.036 Cap design 1 lock 3, bl.; no light g. 203.108.046 Cap design 1 lock 1, bl.; 1 light g. 203.108.056 Cap design 1 lock 2, bl.; 1 light g. 203.108.066 Cap design 1 lock 3, bl.; 1 light g. 203.108.076 Cap design 1 lock 1, red; no light. g. 88 88 88 88 88 88 88 87 87 87 87 87 87 87 87 87 87 87 87 88 88 88 88 87 119 87 138 87 138 87 138 Page Part Description number 203.108.086 Cap design 1 lock 2, red; no light. g. 203.108.096 Cap design 1 203.108.106 Cap design 1 lock 1, red; 1 light. g. 203.108.116 Cap design 1 lock 2, red; 1 light. g. 203.108.126 Cap design 1 203.145.051 Dummy cap 203.146.051 Dummy cap 203.201.011 Protection cap 203.442.011 Rocker with stop 203.701.011 Protection cap 203.731.011 Protection cap 203.990.015 Cap design 1 black, no light guide 203.990.045 Cap design 1 red, no light guide 203.991.015 Cap design 1 black, no light guide 203.991.045 Cap design 1 red, no light guide 205.008.011 Pushbutton 207.122.011 Protection cap 217.xxx.xxx Installation frame 217.127.491 Housing 217.132.031 Housing 217.313.011 Mounting frame black 217.353.021 Installation frame 217.849.011 Block connector 217.879.011 Adapter frame 217.887.011 Assembly frame, can be stringed together; black (end piece) 88 217.887.021 Assembly frame, can be stringed together; black (center piece) 217.954.011 Block connector 231.005.021 Insulating plate for solder terminal 0.5 mm 231.009.011 Insulating plate for solder terminal 0.5 mm 231.010.011 Insulating plate for solder terminal 0.5 mm 231.010.021 nsulating plate for solder terminal 0.8 mm 237.036.011 Dummy piece 240.001.011 Identication plate 240.002.011 Identication plate 248.008.013 Protection hood 248.011.013 Protection hood 288.029.011 Female connector 340.040.011 Gasket 343.001.013 Protection cap green 343.001.023 Protection cap black 343.001.033 Protection cap red 343.002.023 Protection cap 343.171.011 Panel seal 343.171.021 Seal for adapter frame 825.000.011 Key cap, pitch 19 mm, square, without LED window, anthracite 167 208 89 118, 138, 140 157 160 81, 90 123 138 138 119 89 89
PUSHNDRIVE ECO SENSORS PUSHBUTTON SWITCHES
Page
138
257 ]
MICRO-SIGNAL SWITCHES
SNAp-ACTION SWITCHES
FOOT SWITCHES
ROTARY SWITCHES
SLIdE SWITCHES
TOGGLE SWITCHES
AccESSORIES
Part Description number 826.000.011 Key cap, pitch 16 mm, square, without LED window, anthracite 167
PUSHBUTTON SWITCHES
ROCKER SWITCHES
826.000.021 Key cap, pitch 16 mm, square, without LED window, dark grey 826.000.071 Key cap, pitch 16 mm, square, without LED window, red 826.001.011 Key cap, pitch 16 mm, square, anthracite white characters "1" 826.002.011 Key cap, pitch 16 mm, square, anthracite with white characters "2"
SLIdE SWITCHES
TOGGLE SWITCHES
826.003.011 Key cap, pitch 16 mm, square, anthracite with white characters "3" 826.004.011 Key cap, pitch 16 mm, square, anthracite with white
ROTARY SWITCHES
characters "4" 826.005.011 Key cap, pitch 16 mm, square, anthracite with white characters "5" 826.006.011 Key cap, pitch 16 mm, square, anthracite with white
FOOT SWITCHES
characters "6" 826.007.011 Key cap, pitch 16 mm, square, anthracite with white characters "7" 826.008.011 Key cap, pitch 16 mm, square, anthracite with white characters "8" 826.009.011 Key cap, pitch 16 mm, square, anthracite with white characters "9" 826.010.011 Key cap, pitch 16 mm, square, anthracite with white characters "0" 826.017.011 Key cap, pitch 16 mm, square, anthracite with white characters "+" 826.018.011 Key cap, pitch 16 mm, square, anthracite with white characters "-" 826.022.011 Key cap, pitch 16 mm, square, anthracite with white characters "*" 826.023.011 Key cap, pitch 16 mm, square, anthracite with white characters "#" 826.051.011 Key cap, pitch 16 mm, square, anthracite with white characters "A" 826.052.011 Key cap, pitch 16 mm, square, anthracite with white characters "B" 826.053.011 Key cap, pitch 16 mm, square, anthracite with white
ECO
SENSORS
MICRO-SIGNAL SWITCHES
SNAp-ACTION SWITCHES
PUSHNDRIVE
characters "C" 826.054.011 Key cap, pitch 16 mm, square, anthracite with white characters "D"
\ 258
AccESSORIES
Part Description number 844.500.011 Key cap, double, pitch 19 mm, without LED window, dark grey 845.000.011 Key cap, triple, pitch 19 mm, anthracite 169 on request Holder clamp 245 168
PUSHBUTTON SWITCHES
Page
Page
Page
259 ]
PUSHNDRIVE
ECO
SENSORS
MICRO-SIGNAL SWITCHES
SNAp-ACTION SWITCHES
FOOT SWITCHES
ROTARY SWITCHES
SLIdE SWITCHES
TOGGLE SWITCHES
\ 260
SNAp-ACTION SWITCHES TACT ANd KEY SWITCHES FOOT SWITCHES ROTARY SWITCHES SLIdE SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES ROCKER SWITCHES
PUSHNDRIVE
ECO
SENSORS
MICRO-SIGNAL SWITCHES
NOTES
MarqUarDt
DistriBUtors
GERMANY
MTRON Mller GmbH & Co. www.muetron.de PR-Tronik Elektronik-Handels GmbH www.pr-tronik.de Reichelt Elektronik www.reichelt.de Repro Elektronik GmbH www.repro-elektronik.de RS Components GmbH www.rs-online.com Semtech GmbH www.semtech.de Unielektro GmbH & Co KG www.unielektro.de Werner GmbH www.werner-electronic.de
AUsTRIA
Braun & Braun www.braun-braun.at
BELARUs
FEK www.fek.by
CANADA
siehe USA
CHINA
Beijing Eruipu Electronics Co. Ltd. www.eruipu.com Chengdu Ican Automatic Control Technology Co. Ltd. www.icansensing.com Le Champ (S.E.A.) Pte Ltd. www.lechamp.com.sg Shenzen Beifang Electronics Co. Ltd. www.szbeifang.com Shanghai Yinshatai Industrial www.yinshatai.com Shanghai Zeiger Science & Technology Co. Ltd. www.zeiger.com.cn Wisdom Plus (M) SDN BHD (Shenzhen Ofce) (Shanghai Ofce) (Beijing Ofce) www.wisdomplus.com
SLOVAKIA
S.O.S. Electronic, Spol. S.R.O. www.sos.sk
GREAT BRITAIN
Nexus Components Ltd. www.nexuscomponents.co.uk
SLOVENIA
INTERKONT Berger GmbH www.interkont.si
HONG KONG
Group Tower Electronics www.grouptower.com
SOUTH AfRICA
Avnet Kopp Pty. Ltd. www.avnet.co.za
HUNGARY
S.O.S. Electronic, Spol. S.R.O. www.sos.sk
SOUTH AMERICA
Future Electronics www.futureelectronics.com Mouser Electronics, Inc. www.mouser.com SOB Schurter + OKW do Brasil www.sob-brasil.com
INDIA
Le Champ (S.E.A.) Pte Ltd. www.lechamp.com.sg
CZECH REpUbLIC
FK Technics GmbH www.fktechnics.cz
ITALY
Avnet Abacus www.avnet-abacus.eu Newen SRL www.newensrl.it
SpAIN
Eurotronix S.A. www.eurotronix.com
DENMARK
EG Electronics www.egelectronics.com Hans Folsgaard A/S www.hf.dk
JAPAN
Correns Corporation www.correns.co.jp
SWEDEN
EG Electronics AB www.egelectronics.com
EsTONIA
Perel Eesti AS www.perel.ee
KOREA
SAEIL System Co. e-mail saeilpark@dreamwiz.com
SWITZERLAND
Novitronic AG www.novitronic.ch Omni Ray AG www.omniray.ch
FINLAND
Perel OY www.perel.
NETHERLAND
W. Geuken B.V. www.geuken.nl
TAIWAN
Chia Jun Co., Ltd. www.chiajun.com.tw
FRANCE
Avnet Abacus www.avnet-abacus.eu Yelloz Components www.yellozcomponents.com
NORWAY
ELFA Elektronik AS www.elfa.se
TURKEY
Kapman Mmessillik www.kapman.org
PAN EUROPEAN
Farnell GmbH www.farnell.com RS Components GmbH www.rs-components.com
GERMANY
BADER GmbH & Co. KG www.bader.net Brklin OHG www.buerklin.com Conrad Electronic GmbH www.conrad.biz Distrelec Schuricht GmbH www.distrelec.de ETB Electronic Team www.etb-electronic.de EVE GmbH www.eve.de EVG Martens GmbH & Co. KG www.evg.de Farnell GmbH www.farnell.com J. Findler & Sohn Elektrotechn. GmbH www.ndlerusohn.de J.W. Zander GmbH & Co. www.zander-gruppe.de Josef Traub GmbH www.traub-gmbh.de
USA / CANADA
Beyond Components www.beyondc.com Future Electronics www.futureelectronics.com Genie Group www.geniegroup.com Hammond Electronics www.hammondelec.com Heilind Electronics, Inc. www.heilind.com Marsh Electronics, Inc. www.marshelectronics.com Masline Electronics, Inc. www.masline.com Mouser Electronics, Inc. www.mouser.com Spemco www.spemco.com Wes-Garde Components Group, Inc. www.wesgarde.com
pOLAND
Astat sp. z o.o. www.astat.com.pl Dacpol Co. Ltd. www.dacpol.com.pl
PORTUGAL
Montenegro S.A. www.jmontenegro.pt
RUMANIA
SOS Electronic Spol. S.R.O. www.sos.sk
RUssIA
MFC Fulcrum www.fulcrum.ru Perel Russia www.perel-russia.ru
MARQUARDT INTERNATIONAL.
Schaffhausen, Switzerland Moissy Cramayel, France Rietheim-Weilheim, Germany Trossingen, Germany Bttingen, Germany
Tunis, Tunisia