Académique Documents
Professionnel Documents
Culture Documents
2b
Seeed Relay Shield is a smart module with 4 solid relays providing an easy way for applications of voltage
controlling from low to high. The max switching power could be DC90W or AC360VA. It could be directly
controlled by Arduino/Seeeduino through digital IOs with external 9v supply. With the RFBee socket and
315/433M RF module interface, the Relay shield could be remotely controlled, making it be easily used in
robotics, industry control, smart house etc.
Page 1 of 7 10/11/2010
Table of Contents
Features................................................................................................................................................................................................................ 3
Key Specifications (per channel) ............................................................................................................................................................... 3
Licensing .............................................................................................................................................................................................................. 3
Cautions................................................................................................................................................................................................................ 4
Block Diagram ................................................................................................................................................................................................... 4
Usage ..................................................................................................................................................................................................................... 5
With Arduino/Seeeduino .................................................................................................................................................................... 5
With RFBee................................................................................................................................................................................................ 5
With 315M RF module.......................................................................................................................................................................... 7
Support ................................................................................................................................................................................................................. 7
Revision History ............................................................................................................................................................................................... 7
Page 2 of 7 10/11/2010
FEATURES
l
Light weight
Extendible
3A AC 120V / DC 24V
AC 240V / DC 60V
5A
AC 360VA / DC 90W
100,000 Operations
10,000,000 Operations
Safety Standard(relay)
Working Voltage
9VDC
Weight
165g
Working temperature
-30 to +85
Working Humidity
40% - 85%
LICENSING
This documentation is licensed under the Creative Commons Attribution-Noncommercial-Share Alike License
3.0.Source code and libraries are licensed under GPL/LGPL, see source code files for details.
Page 3 of 7 10/11/2010
CAUTIONS
Please be very careful while operating high voltage circuits! You may get hurt or hurt the appliances if used
improperly.
BLOCK DIAGRAM
The function of the Terminal and the Jack is the same since they are internally connected, and you can choose
either of them in needs.
USAGE
WITH ARDUINO/SEEEDUINO
Relay Shield could be directly controlled by Arduino.
Step1. Plug Relay Shield onto Arduino Duemilanove (or compatible) board;
Step2. Supply 9v DC power to Arduino;
Step3. Download the example code and run in Arduino IDE.
WITH RFBEE
Page 5 of 7 10/11/2010
Step1. Download Arduino code for the slave and master RFBee. (How to program the Arduino code on RFBee?)
Step2. Plug the slave RFBee to the Relay Shield.
Step3. Supply the 9v DC power to the Relay shield.
Step4. Power the master RFBee with 3.3v by UartSBee v3.1 or other supply.
Step1. Download Arduino code for the slave and master RFBee. For the master, you need to add the new
commands to control extended relays, i.e. RCA1means set the 11st relay (on hub2, relay3) on.
Page 6 of 7 10/11/2010
SUPPORT
Please refer to product page for latest documents and development resources, any product related issue could
be inquired via info@seeedstudio.com
REVISION HISTORY
Rev.
Descriptions
Editor
Release date
v1.0b
V1.2b
Intermediate version
Lafier
V1.2b
Icing
Oct 9, 2010
Page 7 of 7 10/11/2010