Académique Documents
Professionnel Documents
Culture Documents
Operating Instructions
2)
3)
4)
5)
6)
7) 8) 9)
10) Necessary special washer (38) or (39) or (40) to be used to restrict axial play and free rotation as shown. Note : a) There should be mm 3 mm gap between couplet and shaft, while rotating the drive, it should not rub against any part. While ordering any missing part, indicate Sr. No., description and quantity. While ordering any front drive, indicate order No. with correct design, as shown in left vertical Columns.
b)
c)
Panel Mounting for 3 LAO-2 Normal & Lockable Panel Mounting for 3 LAO-6 Normal & Lockable
3LXO-640-6YA
3LXO-246-5YA
3LXO-640-4YA
3LXO-240-3YA
3LXO-640-2YA
3LXO-240-1YA
3LXO-640-6YA
3LXO-246-5YA
3LXO-640-4YA
3LXO-240-3YA
3LXO-640-2YA
3LXO-240-1YA
Lockable Normal Handle in Alternate Every Handle Position Position Sr. No. 06 05 04 03 02 01 Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 6 6 7 1 2 2 3 1 6 6 7 1 2 2 3 1 6 6 7 1 2 2 4 6 6 2 2 4 6 6 2 2 2
4 Cheese hd. Screw Am4 x 15 IS 1366 6 Washer B 4.5 IS 2016 6 Spring Washer M4-B IS 3063 2 Cheese hd. screw AM4 x 10 IS 1366 2 Cheese hd. screw AM5 x 10 IS 1366 2 Washer B 5.5 IS 2016 3 Spring Washer M5-B IS 3063 1 Cheese hd. Screw AM5 x 20 IS 1366 CSK hd. Screw AM4 x 18 IS 1365 Hex. Nut M4 IS 2389 1 Circlip C5 x 0.7 IS 3075 Circlip C8 x 1 IS 3075 1 Circlip C9 x 1.1 IS 3075 1 Special Washer 1 Special Washer Special Washer (*if reqd.)
Siemens Ltd.
SGR-01-100-007
Product development is a continuous process. Consequently the data indicated in this leaflet is subject to change without prior notice. For latest issue contact our sales offices.
Silverpoint 029703