Académique Documents
Professionnel Documents
Culture Documents
Photo on title page: German superspeed maglev train Transrapid with multi-band antenna 870 2170 MHz. Catalogue Issue 09/01 All data published in previous catalog issues hereby becomes invalid. We reserve the right to make alterations in accordance with the requirements of our customers.
Please note:
The details given in our data sheets have to be followed carefully when installing the antennas and accessories. The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Frequency band
Type No.
Operating frequency range Tunable in the range 68 ... 87.5 MHz 87.5 108 MHz Tunable in the range 146 ... 174 MHz 146 156 MHz 156 174 MHz 146 172 MHz 165 174 MHz 457.4 468.3 MHz 406 ... 470 MHz 380 412 MHz 410 470 MHz 410 430 MHz 450 470 MHz 444 461.5 MHz 457 470 MHz 450 470 MHz 806 960 MHz 870 960 MHz 876 960 MHz 870 960 MHz 1575.42 1 MHz 1572.42 MHz 870 2170 MHz
Remarks
Page
4m-band FM radio
2m-band
9 10 11 12 13
2m-/70cm-band
Yes Yes Gain 2 dB Special radome Special radome Yes Yes Yes Yes Two-band antenna Special radome Gain 3.5 dB Low profile
14 15 16 16 17 18 19 20 21 22
70cm-band 725 892 K 70 21 21 729 003 721 232 70cm-band 800/900 MHz K 70 20 61 741 009 800/900 MHz K 70 21 63 1 741 806 900 MHz / GPS 742 185 900/1800 MHz / UMTS 1800 MHz / UMTS / WLL 742 325
870 10001
Yes
Low profile
23
Article summary The articles are listed by type number in numerical order
Type No.
721 232 725 892 727 313 728 954 729 003 731 495 732 997 733 707 741 009 741 806 742 185 742 325 790 244 870 10001 K 50 21 41 K 50 21 22 K 50 22 21 1 K 50 22 21 2 K 50 22 22 1 K 50 22 22 2 K 70 20 21 K 70 20 61 K 70 21 21 K 70 21 63 1 K 70 23 21 K 70 23 21 0 K 70 23 21 1 K 70 23 23 K 70 23 23 0 K 70 23 23 1
Page
16 15 7 17 16 11 13 10 18 20 21 22 11 23 6 8 9 9 9 9 14 17 15 19 12 12 12 12 12 12
Type No. Input Frequency range Impedance Polarization Max. power Weight Packing size (outside) Material:
K 50 21 41 N female 68 ... 87.5 MHz 50 Vertical 100 Watt (at 50 C ambient temperature) 5.3 kg 502 x 162 x 370 mm Radiator and base: Aluminum. Radome: Fiberglass; Colour: Grey. On a conductive surface 200 x 100 cm min. with 3 studs M10. The antenna can be tuned to the transmitter frequency in the range 68 ... 87.5 MHz by two tuning screws. This antenna approved by the Deutsche Bahn AG is D.C. grounded to protect against lightning and high-tension lines. After mounting the antenna can be turned 30 when the mounting elements are still loose. The tuning screws are inside the fiberglass cover and easily accessible from the outside by means of plastic caps. M10 20 mm Antenna and lead sealing disk.
Sealingdisk (Lead)
43 mm
Mounting:
Tuning:
Special features:
Scope of supply:
30 35 mm
120 mm
Typical Standing Wave Ratio (VSWR) Examples for tuning to different frequencies measured against a 2 x 1 m conductive plane. Welding flange:
1 44 mm
478 m m
324 mm
Type No. Input Frequency range Impedance Polarization Weight Packing size (outside) Material:
727 313 N female 87.5 108 MHz 50 Vertical 0.9 kg 151 x 90 x 415 mm Flange: Aluminum. Radiator: Copper. Radome: Fiberglass; Colour: Light grey. All screws and nuts: Stainless steel. On a conductive surface with a minimum size of 100 x 200 cm by means of existing M10 studs. This antenna approved by the Deutsche Bahn AG is D.C. grounded to protect against lightning and high-tension lines.
Mounting:
Mounting flange:
145 mm
80 mm
13 mm
43 mm 115 mm
Mounting hole for the connector: 33 (max. 35) mm diameter. Note: Keep mounting surface clear of paint for electrical contact.
28 mm
56 mm
32 mm
355 mm
9 mm
140 mm
Type No. Input Frequency range Impedance Antenna efficiency Polarization Max. power Weight Packing size (outside) Material:
K 50 21 22 UHF female 146 ... 174 MHz 50 > 0.95 Vertical 100 Watt (at 50 C ambient temperature) 3.3 kg 232 x 172 x 305 mm Radiator and base: Hot dip galvanized steel. Tuning screws: Brass, nickel plated. Colour: Unpainted zinc surface. On a conductive surface 100 x 100 cm min. with 4 studs M10 and counterflange. With two tuning screws the antenna can be set to the transmitter frequency. This antenna approved by the Deutsche Bahn AG is D.C. grounded to protect against lightning and high-tension lines. Antenna with 4 studs, each with 2 nuts, 1 rubber gasket and 1 counterflange.
80 m m
Mounting:
215 mm
Tuning:
5 14
m m
Scope of supply:
Type No. Input Frequency range VSWR Impedance Polarization Max. power Weight Packing size (outside)
K 50 22 21 1 N female
K 50 22 21 2 230 mm
6 24 m m
120 mm
rection Driving di
UHF female 146 156 MHz < 1.4 50 Ohm Vertical 100 Watt (at 50 C ambient temperature) 1.2 kg 262 x 262 x 145 mm
Type No. Input Frequency range VSWR Impedance Polarization Max. power Weight Packing size (outside) Material:
K 50 22 22 1 N female
K 50 22 22 2
UHF female 156 174 MHz < 1.4 50 Ohm Vertical 100 Watt (at 50 C ambient temperature) 1.2 kg 262 x 262 x 145 mm Radiator and Base: Aluminum. Radome: Fiberglass, colour: Grey. Studs and all screws and nuts: Stainless steel. On a conductive surface 100 x 100 cm min. with 3 studs M10 and counterflange. Note: No superstructures in this area. D.C. grounded to protect against lightning and high-tension lines. Antenna with 3 studs, each with 2 nuts, 1 rubber gasket and 1 counterflange.
Mounting:
Type No. Input Frequency range VSWR Gain Impedance Polarization Max. power Weight Packing size (outside) Material:
733 707 N female 146 172 MHz < 2.0 0 dB (ref. to the quarter-wave antenna) 50 Vertical 100 Watt (at 50 C ambient temperature) 0.8 kg 151 x 90 x 415 mm Radiator and Flange: Aluminum. Radome: Fiberglass, colour: Light grey. All screws and nuts: Stainless steel. On a conductive surface 100 x 100 cm min. with 4 studs M10. This antenna approved by the Deutsche Bahn AG is D.C. grounded to protect against lightning and high-tension lines.
Mounting:
Mounting flange:
145 mm
80 mm
13 mm
43 mm 115 mm
Mounting hole for the connector: 33 (max. 35) mm diameter. Note: Keep mounting surface clear of paint for electrical contact.
28 mm
56 mm
32 mm
355 mm
10
Train Antenna 165 174 MHz and 457.4 468.3 MHz 731 495
Two-band antenna in fiberglass radome. The antenna can be operated in both frequency ranges simultaneously by using the combiner 790 244.
Type No. Input Frequency range VSWR Gain Impedance Polarization Max. power Weight Packing size (outside) Material:
731 495 N female 457.4 468.3 MHz < 1.6 0 dB 2 dB (ref. to the quarter-wave antenna) 50 Vertical 10 Watt (at 50 C ambient temperature) 0.8 kg 151 x 90 x 415 mm 165 174MHz Radiator and flange: Aluminum. Radome: Fiberglass; Colour: Light grey. All screws and nuts: Stainless steel. On a conductive surface 100 x 100 cm min. with 4 studs M10. This antenna is D.C. grounded to protect against lightning and high-tension lines.
Mounting:
Mounting flange:
nicht lackiert not painted
56 mm 28 mm 13 mm
43 mm 145 mm 32 mm
Dichtungsring Sealing O-ring
355 mm
80 mm
Mounting hole for the connector: 33 (max. 35) mm diameter. Note: Keep mounting surface clear of paint for electrical contact.
115 mm
11
100 mm
M 11 x 1 female M 11 x 1 female N-female (the connector for cable (the connector for cable RG 58 C/U is supplied). RG 213/U is supplied). Drill hole dimension 12 mm 12 mm 17 mm Frequency range 406 428 MHz VSWR < 1.7 Gain 0 dB (ref. to the quarter-wave antenna) Impedance 50 Polarization Vertical Max. power 50 Watt (at 50 C ambient temperature) Weight 0.40 kg Packing size (outside) 117 x 117 x 114 mm Height 70 mm
110 mm
M 11 x 1 female M 11 x 1 female N-female (the connector for cable (the connector for cable RG 58 C/U is supplied). RG 213/U is supplied). Drill hole dimension 12 mm 12 mm 17 mm Frequency range 440 470 MHz VSWR < 1.5 Gain 0 dB (ref. to the quarter-wave antenna) Impedance 50 Polarisation Vertical Max. power 50 Watt (at 50 C ambient temperature) Weight 0.40 kg Packing size (outside) 117 x 117 x 114 mm Height 70 mm Material: Radiator and base: Aluminum. Radome: High impact plastic. All screws an nuts: Stainless steel. On a conductive surface 50 x 50 cm min. The drilling diameter is 12 mm except the N connector versions: 17 mm. A special zinc washer ensures a good contact at the edges of the hole. All metall parts of this antenna are D.C. grounded. Extreme robust and car-wash proof vehicular antenna.
Mounting:
Special features:
25 mm 12
70 mm
Type No. Input Frequency range VSWR Gain Impedance Polarization Max. power Weight Packing size (outside) Material:
732 997 N female 380 412 MHz < 1.5 0 dB (ref. to the quarter-wave antenna) 50 Vertical 200 Watt (at 50 C ambient temperature) 0.5 kg 151 x 87 x 210 mm Radiator and flange: Aluminum. Radome: Fiberglass; Colour: Light grey. All screws and nuts: Stainless steel. On a conductive surface with a minimum size of 100 x 100 cm with 4 studs M10. This antenna is D.C. grounded to protect against lightning and high-tension lines.
Mounting:
Mounting flange:
145 mm
80 mm
13 mm
43 mm 115 mm
Mounting hole for the connector: 33 (max. 35) mm diameter. Note: Keep mounting surface clear of paint for electrical contact.
28 mm
56 mm
32 mm
142 mm 13
Type No. Input Frequency range VSWR Gain Impedance Polarization Max. power Weight Packing size (outside) Material:
K 70 20 21 N-female 410 470 MHz < 1.5 0 dB (ref. to the quarter-wave antenna) 50 Ohm Vertical 170 Watt (at 50 C ambient temperature) 0.5 kg 151 x 87 x 210 mm Radiator and Flange: Aluminum. Radome: Fiberglass, colour: Light grey. All screws and nuts: Stainless steel. On a conductive surface with a minimum size of 50 x 50 cm by means of existing M10 studs. This antenna approved by the Deutsche Bahn AG is D.C. grounded to protect against lightning and high-tension lines.
Mounting:
Mounting flange:
145 mm
80 mm
13 mm
43 mm 115 mm
Mounting hole for the connector: 33 (max. 35) mm diameter. Note: Keep mounting surface clear of paint for electrical contact.
28 mm
56 mm
32 mm
142 mm 14
Train Antenna 410 430 / 450 470 MHz K 70 21 21, 725 892
2 dB gain broadband antenna in fiberglas radome.
Type No. Input Frequency range VSWR Gain Impedance Polarization Max. power Weight Packing size (outside) Material:
K 70 21 21 N-female
725 892
Radiator and Flange: Aluminum. Radome: Fiberglass, colour: Light grey. All screws and nuts: Stainless steel. On a conductive surface with a minimum size of 50 x 50 cm by means of existing M10 studs. This antenna approved by the Deutsche Bahn AG is D.C. grounded to protect against lightning and high-tension lines.
Mounting:
Mounting flange:
145 mm
80 mm
13 mm
43 mm 115 mm
Mounting hole for the connector: 33 (max. 35) mm diameter. Note: Keep mounting surface clear of paint for electrical contact.
28 mm
56 mm
32 mm
355 mm
410 430 MHz < 1.5 2 dB (ref. to the quarter-wave antenna) 50 Ohm Vertical 640 Watt (at 50 C ambient temperature) 0.8 kg 151 x 90 x 415 mm
15
Low Silhouette Train Antenna 444 ... 470 MHz 729 003, 721 232
0 dB antenna of very low profile in fiberglass radome.
163 mm
Type No. Input Frequency range VSWR Gain Impedance Polarization Max. power Weight Packing size (outside) Material: 729 003 721 232 N female N female 444 461.5 MHz 457 470 MHz < 1.7 (444 461.5 MHz) < 1.5 < 1.5 (448 458 MHz) . 0 dB (ref. to the quarter-wave antenna) 50 Vertical 50 Watt (at 50 C ambient temperature) 0.65 kg 137 x 92 x 174 mm Base: Aluminum. Radiator: Aluminum. Radome: Fiberglass; Colour: Grey. All screws and nuts: Stainless steel. On a conductive surface of a minimum size of 50 x 50 cm by means of 4 existing M10 studs. This antenna is D.C. grounded to protect against lightning and high-tension lines.
Mounting:
Mounting flange:
145 mm
82 mm
13 mm
43 mm 115 mm
Mounting hole for the connector: 33 (max. 35) mm diameter. Note: Keep mounting surface clear of paint for electrical contact.
28 mm
56 mm
32 mm
95 mm
16
Type No. Input Frequency range VSWR Gain Impedance Polarization Max. power Weight Packing size (outside) Material:
K 70 20 61 N female 450 470 MHz and 806 960 MHz < 1.5 0 dB (ref. to the quarter-wave antenna) 50 Vertical 500 Watt (at 50 C ambient temperature) 0.5 kg 151 x 87 x 210 mm Radiator: Brass. Flange: Aluminum. Radome: Fiberglass; Colour: Light grey. All screws and nuts: Stainless steel. On a conductive surface with a minimum size of 50 x 50 cm by means of 4 existing M10 studs. This antenna approved by the Deutsche Bahn AG is D.C. grounded to protect against lightning and high-tension lines. Mounting flange:
nicht lackiert not painted
Mounting:
56 mm 28 mm 13 mm
43 mm
145 mm
32 mm
80 mm
Mounting hole for the connector: 33 (max. 35) mm diameter. Note: Keep mounting surface clear of paint for electrical contact.
115 mm
142 mm 17
163 mm
Typ Nr. Input Frequency range VSWR Gain Impedance Polarization Max. power Weight Packing size (outside) Material: 741 009 N-female 870 960 MHz < 1.5 0 dB (ref. to the quarter-wave antenna) 50 Vertical 100 Watt (at 50 C ambient temperature) 0.5 kg 137 x 92 x 174 mm Radiator: Brass. Flange: Aluminum. Radome: Fiberglass; Colour: Light grey. All screws and nuts: Stainless steel. On a conductive surface of a minimum size of 50 x 50 cm by means of 4 existing M10 studs. This antenna approved by the Deutsche Bahn AG is D.C. grounded to protect against lightning and high-tension lines.
Mounting:
Mounting flange:
145 mm
82 mm
13 mm
43 mm 115 mm
Mounting hole for the connector: 33 (max. 35) mm diameter. Note: Keep mounting surface clear of paint for electrical contact.
28 mm
56 mm
32 mm
95 mm
18
Type No. Input Frequency range VSWR Gain Impedance Polarization Max. power Weight Packing size (outside) Material:
K 70 21 63 1 N female 876 960 MHz < 1.5 3.5 dB (ref. to the quarter-wave antenna) 50 Vertical 500 Watt (at 50 C ambient temperature) 1 kg 151 x 90 x 415 mm Radiator: Brass. Flange: Aluminum. Radome: Fiberglass; Colour: Light grey. All screws and nuts: Stainless steel. On a conductive surface with a minimum size of 50 x 50 cm by means of 4 existing M10 studs. This antenna approved by the Deutsche Bahn AG is D.C. grounded to protect against lightning and high-tension lines.
Mounting:
Mounting flange:
145 mm
80 mm
13 mm
43 mm 115 mm
Mounting hole for the connector: 33 (max. 35) mm diameter. Note: Keep mounting surface clear of paint for electrical contact.
28 mm
56 mm
32 mm
355 mm
19
Type No. GSM 900 Antenna Input Frequency range VSWR Gain Impedance Polarization Max. power Inner conductor GPS Antenna Input Frequency range VSWR Polarization Gain (90 elevation) Axial ratio Impedance Inner conductor Isolation Weight Packing size Height Material:
741 806
N female 870 960 MHz < 1.5 0 dB (ref. to the quarter-wave antenna) 50 Vertical 100 Watt (at 50 C ambient temperature) D.C. grounded Cable RG 316/U of 160 mm length with TNC male connector 1575.42 1 MHz < 1.5 Right hand circular 2 dB (ref. to the circularly polarized isotropic antenna) 3 dB 50 D.C. grounded 28 dB (870 960 MHz) 20 dB (1575.42 1 MHz) 0.5 kg 161 x 152 x 88 mm 96 mm Radiator: Copper and brass. Flange: Aluminum. Radome: Fiberglass. All screws and nuts: Stainless steel. Colour: Grey. On a conductive surface with a minimum size of 50 x 50 cm by means of 4 existing M10 studs. This antenna, which is approved by the Deutsche Bahn AG, is D.C. grounded to protect against lightning and high-tension lines. Low-noise GPS-preamplifier 742 185 (please order separately). If the antenna is operated without the preamplifier type no. 742 185, please note the following points. Due to the fact that the inner conductor of the GPS antenna is DC grounded, the input of the GPS receiver is loaded with a DC short circuit. If the GPS receiver provides a remote DC power supply, this could damage the GPS receiver. At the GPS input of the antenna a level of 28 dB below the applied GSM signal appears. Depending on the level of the GSM signal, the GPS receiver may be overloaded or damaged. 13 mm
mm
Mounting flange: 56 mm 28 mm
nicht lackiert not painted
Mounting:
Accessories:
43 mm
32
Warning:
145 mm
82 mm Mounting hole for the connector: 33 (max. 35) mm diameter. Note: Keep mounting surface clear of paint for electrical contact. 20
115 mm
96 mm
The low noise amplifier 742 185 is designed for the use with the dual band GSM 900 / GPS train antenna type no. 741 806. The low noise amplifier includes a preselsection filter to prevent the interference in case of simultaneous operation at GSM 900 and GPS.
Block Diagram
preselection filter Input TNC female bandpass filter GPS
1st stage
2nd stage
Type No. Frequency Gain Noise figure VSWR (input, output) Operation voltage Operation current Connector input Connector output Dimensions ( w x h x l) Mounting
742 185 1575.42 MHz, L1-signal 25 2 dB < 2.0 dB < 1.8 4.3 ... 5.5 V, ripple < 50 mV, supplied at inner conductor RF-output < 40 mA TNC female N female 70 x 22 x 50 mm 4 holes d = 4.5 mm
53
70 Input (Antenna)
The noise level at the GPS-frequency generated by the GSM 900 operation should not exceed the thermal noise level at the input of the GPS-amplifier, otherwise the noise figure will be increased.
TNC
5 50 90 21
The maximum input power at the input of the amplifier at GSM 900 is limited to + 12 dBm.
22
Additional features:
Type No. Input Frequency range VSWR Gain Impedance Polarization Max. power Weight Packing size Height Material:
742 325 N female 870 2170 MHz < 1.5 (870 960 MHz + 1710 2170 MHz) < 1.8 (960 1710 MHz) 0 dB (ref. to the quarter-wave antenna) 50 Vertical 100 Watt per band (at 50 C ambient temperature) 0.5 kg 161 x 152 x 88 mm 96 mm Radiator: Brass. Flange: Aluminum. Radome: Fiberglass. All screws and nuts: Stainless steel. Colour: Grey. On a conductive surface with a minimum size of 50 x 50 cm by means of 4 existing M10 studs. This antenna approved by the Deutsche Bahn AG is D.C. grounded to protect against lightning and high-tension lines.
Mounting:
32
mm
82 mm
13 mm
43 mm 115 mm
Mounting hole for the connector: 33 (max. 35) mm diameter. Note: Keep mounting surface clear of paint for electrical contact.
28 mm
56 mm
96 mm 22
Type No. Input Frequency range VSWR Gain Impedance Polarization Max. power Weight Packing size Height Material:
870 10001 N female 1710 2550 MHz < 1.5 0 dB (ref. to the quarter-wave antenna) 50 Vertical 100 Watt per band (at 50 C ambient temperature) 0.5 kg 161 x 152 x 88 mm 96 mm Radiator: Brass. Flange: Aluminum. Radome: Fiberglass. All screws and nuts: Stainless steel. Colour: Grey. On a conductive surface with a minimum size of 50 x 50 cm by means of 4 existing M10 studs. This antenna approved by the Deutsche Bahn AG is D.C. grounded to protect against lightning and high-tension lines.
Mounting:
32
mm
82 mm
13 mm
43 mm 115 mm
Mounting hole for the connector: 33 (max. 35) mm diameter. Note: Keep mounting surface clear of paint for electrical contact.
28 mm
56 mm
96 mm 23
Technical Information:
Fax: (++49)8031/184-973 E-Mail: antennas.mobilcom@kathrein.de
Internet: www.kathrein.de KATHREIN-Werke KG . Telephone +49 80 31 1 84-0 . Fax +49 80 31 1 84-9 91 Anton-Kathrein-Strae 1 3 . PO Box 10 04 44 . D-83004 Rosenheim . Germany
9986.378/0901/2/ZW/PF
Subject to alteration.