Académique Documents
Professionnel Documents
Culture Documents
This topic provides a summary of the fields that must be present in the CellRefs file for Analyzer to work correctly. There are some fields that are always required and others that are required for specific technologies and solutions. In This Topic All Technologies and Solutions Additional Fields by Technology Additional Fields Used by Veritune See Also CellRefs CellRefs CellRefs CellRefs CellRefs Fields: Fields: Fields: Fields: Fields: CDMA EVDO GSM UMTS TDD (UTDD) WCDMA
Sector-Level Fields Field TECHNOLOGY_SiteIDForCell Sector_ID Azimuth Description The ID of the site to which the sector belongs. The ID of the cell or sector within the site. The sector's azimuth angle relative to true North, expressed in degrees. If this field is missing or does not contain a sensible value, the sector will be shown pointing due North on the map. The sector's beam width angle expressed in degrees. Used to control the size of the sector wedges on the map. If this field is missing or does not contain a sensible value, the sector will be shown on the map as a narrow line rather than a wedge.
Beamwidth
MNC
LAC
CDMA/EV-DO Field PN UMTS Field SC WCDMANeighborList Description The sector's scrambling code. This is an array field is required only by the 3G missing neighbor analysis to store the scrambling (SC) codes of the 3G neighbors. Although this field must be present on the WCDMA_Cell network element, it does not need to store data, because the 3G missing neighbor analysis will automatically suggest neighbors. If this field does store data, the analysis will suggest cells for removal when they do not meet the defined criteria. This is an array field that is required only by the 3G-2G missing neighbor analysis to store the cell identity (CI) codes of the 2G neighbors. Note that these must match CI codes of GSM sector elements within the CellRefs file. Although this field must be present on the WCDMA_Cell network element, it does not need to store data, because the 3G-2G missing neighbor analysis will automatically suggest neighbors. If this field does store data, the analysis will suggest cells for removal when they do not meet the defined criteria. UMTS TDD (UTDD) Field Toffset UARFCN iDEN Field CCCH Color_Codes Description Common control channel. Can be used to color the sector wedges. A list of color codes (SAT and DVCCs) that match the entries in the Traffic_Channels field. Used for determining likely serving and neighbor cells. Description The time offset for the sector. The UTRA absolute radio frequency channel number. Description The pseudo noise code for the sector.
GSMNeighborList
IS 136/IS 54 Field Color_Codes Description A list of color codes (SAT and DVCCs) that match the entries in the Traffic_Channels field. Used for determining likely serving and neighbor cells.
UMTS
EV-DO
EIRP
CDMA
CDMA_Freq
EIRP
If this field is absent, all frequencies are assumed. Integer. This optional field stores outward power of the sector in dBm. If this field is present, Veritune adjusts it when you enter a value in the Relative Power box. If this field is not present, Veritune adjusts the measured power value instead. This optional field indicates the frequency in MHz in multifrequency network configurations where PN varies with frequency. If this field is absent, all frequencies are assumed. Integer. This optional field stores outward power of the sector in dBm. If this field is present, Veritune adjusts it when you enter a value in the Relative Power box. If this field is not present, Veritune adjusts the measured power value instead. Percentage of power allocated to pilot channel. Integer. Percentage of power allocated to traffic channels. Integer. Percentage of power allocated to paging channel. Integer. Percentage of power allocated to synchronization channels. Integer.
Technology-Specific Information CellRefs CellRefs CellRefs CellRefs CellRefs See Also Structure of the CellRefs File CellRefs Preferences Veritune Preferences Adding New Fields to the CellRefs File Lines to Cells CellRefs History CellRefs Limits Send feedback on this topic Fields: Fields: Fields: Fields: Fields: CDMA EVDO GSM UMTS TDD (UTDD) WCDMA
Introduction
Network configuration information (such as the names, IDs, and locations of the cell sites, etc.) is stored in a text file that is called the CellRefs file. This topic provides information about the structure of this file and the configuration file (called DefNetworkData.ini), which defines its structure and format. You set the location of the CellRefs file in the Preferences dialog box. See CellRefs Preferences for more information. The cellrefs file is a text file that stores information about actual physical network elements. The first line of the file must be as follows: ; #NetworkData - datafile Each subsequent line in the file stores information about an individual network element (such as a cell or site). The information that is stored for each network element must correspond to the definition specified for that type of network element in the DefNetworkData.ini file.
[Network Elements] CDMA_Site=Site_Name SiteID Latitude Longitude CDMA_Cell=CDMA_SiteIDForCell Sector_ID Azimuth Beamwidth EIRP PN MCC SID NID BID PctPilot PctTraf GSM_MSC=ID MSCName GSM_BSC=ID MSCID BSCName GSM_Site=Site_Name SiteID Latitude Longitude GSM_Cell=GSM_SiteIDForCell Sector_ID Azimuth Beamwidth EIRP BCCH MCC MNC LAC CI BSIC BSCID Face_D . . . [Fields]. This section defines the properties of each field, including: The format group (such as string, integer, degrees, or percentage) to be used for the data in the field. Format groups specify the data type and control how the information is formatted (for example, when it is displayed in the Map view). The format group can also be used to define valid values to be used to validate the data when it is imported. Whether the field is Required (must be present) or Key (must be present and unique). Whether the field is an array field, which means that the field can contain a variable-length list of values (such as a neighbor list). These fields are specified using the array keyword, as shown for the CDMANeighborList field below. If the field maps one network element to another, the related field is defined using the Ref:NetworkElement:Field:RelationTypeToOther#RelationToMe syntax. RelationTypeToOther specifies the relationship between the network element and the linked object (typical examples are Parent and CellSite). RelationToMe specifies the reverse relationship (for example, Child and Cell). In the snippet from the [Network Elements] section shown above, the CDMA_SiteIDForCell field has been highlighted. Below is a snippet from the [Fields] section, in which the same field has been highlighted. Notice that the Ref keyword has been used to specify that this field is linked to the SiteID field in the CDMA_Site
network element. [Fields] Test=array:integer GSM_SiteIDForCell=Ref:GSM_Site:SiteID:CellSite#Cell:key CDMA_SiteIDForCell=Ref:CDMA_Site:SiteID:CellSite#Cell:key CDMA1xEVDO_SiteIDForCell=Ref:CDMA1xEVDO_Site:SiteID:CellSite#Cell:key IS136_SiteIDForCell=Ref:IS-54/IS-136_Site:SiteID:CellSite#Cell:key AMPS_SiteIDForCell=Ref:AMPS_Site:SiteID:CellSite#Cell:key IDEN_SiteIDForCell=Ref:IDEN_Site:SiteID:CellSite#Cell:key TETRA_SiteIDForCell=Ref:TETRA_Site:SiteID:CellSite#Cell:key WCDMA_SiteIDForCell=Ref:WCDMA_Site:SiteID:CellSite#Cell:key MSCID=Ref:GSM_MSC:ID:Parent#Child BSCID=Ref:GSM_BSC:ID:Parent#Child Site_Name=Site SiteID=string:key Latitude=Degrees:required Longitude=Degrees:required . . . CDMANeighborList=array:integer . . . [GSM_MSC]. This section specifies that the GSM_MSC network element is the root element in the hierarchy of GSM network elements. Custom configuration files might contain an equivalent section for other technologies. [GSM_MSC] RootObject=yes Entire default DefNetworkData.ini file
Technology-Specific Information CellRefs CellRefs CellRefs CellRefs CellRefs Fields: Fields: Fields: Fields: Fields: CDMA EVDO GSM UMTS TDD (UTDD) WCDMA
Related Topics CellRefs Preferences Map Projections Send feedback on this topic
CellRefs Preferences
The CellRefs settings in the Preferences dialog provide configuration options for the CellRefs file, which stores information about the physical network. Introduction CellRefs preferences Using the manual import feature to create an import template CellRefs fields Import file specification Data validation
Introduction
When you first install the software, it is configured with an empty CellRefs file (called cellrefs.txt) located in the Bin\CellRefs folder within the user data area. CellRefs files must have a specific format (which is described in Structure of the CellRefs File) and must contain specific fields. The fields that are required depend on the technology and solution you are using and are described in Required CellRefs Fields. If you already have an appropriately formatted CellRefs file containing your network data, you can simply change the CellRefs File Location in the Preferences dialog to the name and location of your file. Otherwise, you need to import your network data and save it as a CellRefs file. Network data can come from a wide range of databases and systems, such as planning tools. Generally these provide a mechanism for exporting the data in a delimited text format that is suitable for import. You can configure the software so that it automatically imports the network data again whenever it has changed. Alternatively you can import new network data manually when necessary or make small modifications in the Network Explorer. Note: Currently only one CellRefs file can be used at a time.
CellRefs preferences
If you change the CellRefs file and the new file relates to the same technology (or combination of technologies) that you were using before, you no do not need to restart the application in order for the changes to take effect. But if you change the CellRefs file after loading log files, you may see some unexpected resultsfor example, when you use the Lines to Cells feature on the map with those log files. Therefore, after changing the CellRefs file, you should generally close any log files that you loaded earlier, and if necessary, reload them. However, you must restart the application if you change a new CellRefs file that relates to a different technology or combination of technologies.
File Location. Specifies the name and location of the current CellRefs file. This can either be an existing valid CellRefs file or a blank text file that starts with the following line and into which you will import your network configuration data:
; #NetworkData - datafile Note that the file you specify here will be overwritten if you select an Enable Import Source option below or manually import network configuration data in Network Explorer and save your changes. Enable Association with Log Files. Select this option if you want the application to track which CellRefs file is in use when you load a log file. A warning will then be displayed if you subsequently attempt to load the log file using a different CellRefs file. This is useful if you tend to work with log files from different regions, which require different CellRefs files. The default is deselected. Automatic Import. This feature automatically imports network configuration data into the CellRefs file specified above. This is useful when your network is updated frequently and means that whenever new network configuration data becomes available, it automatically gets imported when the application starts up. You can automatically import data from up to four different sources. This is useful if your network configuration data comes from more than one databasefor example, if your GSM configuration data comes from one database or planning tool and your UMTS data from another. However, automatic import is not suitable for use with Spotlight. If necessary you should use the automatic import feature to import data from your planning tools prior to setting up your Spotlight project. Then before you create the Spotlight project, save the cellrefs file into which the data has been imported to another location and deselect the Enable Import Source options. Note that the imported information will be written to the CellRefs file specified in the File Location option above. For each source, the options are: Enable Import Source. Select this option to enable the automatic import from this source. The default is deselected. Automatic Import Input File. Specifies the delimited text file containing the network configuration data to be imported. See Import file specification below for more information. Typically you would do a manual import before starting to use the automatic import in order to ensure that the file and template (see next option) are set up correctly. The data in this file will be imported and saved to the CellRefs file specified above whenever you start up the application after any of the following: