Académique Documents
Professionnel Documents
Culture Documents
E3JK
Ordering Information
Relay Output Types
Item Model Light-ON mode Dark-ON mode Polarized light beam Sensing distance Through-beam (separate) E3JK-5M1 E3JK-5M2 --5m E3JK-R2M1 E3JK-R2M2 Yes 2.5 m Retroreflective E3JK-R4M1 E3JK-R4M2 No 4m Diffuse reflective E3JK-DS30M1 E3JK-DS30M2 --30 cm
E3JK
E3JK
Specifications
Ratings/Characteristics
Amplifier Units
Item Power supply voltage E3JK-5jj E3JK-R2jj E3JK-R4jj E3JK-DS30jj 12 to 240 VDC 10%, 24 to 240 VAC 10%, 50/60 Hz 2 W max. 4 m (see note 1), 5m (see note 2) 30 cm E3JK-R2Hj-G 10 to 30 VDC, ripple (p-p): 10% max. 40 mA max. 2.5 m (see note 1) --Transistor output: open collector (NPN/PNP): 100 mA at 30 VDC; Voltage drop: 1 V max. 3 ms max. 5 ms max. Adjustable Fixed 12 to 240 VDC 10%, 24 to 240 VAC 10%, 50/60 Hz
3 W max. 5m
20% max.
DC solid-state
Response p time (ON OFF) (ON, Sensitivity Operation mode Indicators Enclosure rating Material Light source
30 ms max. 10 ms max. Fixed Light-ON or Dark-ON Light (red) IEC IP64, NEMA 1, 2, 12 Plastic Infrared LED Red LED Infrared LED
Red LED
E3JK
E3JK
Engineering Data
Excess Gain Ratio
E3JK-5jj E3JK-R2jj E3JK-R4jj
Operating Range
E3JK-DS30jj E3JK-5jj E3JK-DS30jj
Optical axis
Y X
White mat paper (10 x 10 cm)
Emitter
Sensitivity
E3JK-R2jj Operating position Y (cm) E3JK-R4jj Operating position Y (cm) E3JK-DS30jj Sensing distance Y (mm)
Y X
Y X
E3JK
E3JK
Operation
Output Circuits
Relay Output Types
24 to 240 VAC 12 to 240 VDC
Power source
10 to 30 VDC
Blue (any polarity ) White - - - COM Black - - - NO Gray - - - NC Relay output (see note)
Main circuit
100 mA max.
Load 0V
Note:
Brown
Blue
Drive circuit
Black (L-ON)
48 VDC
White
Positive Common
24 to 240 VAC 12 to 240 VDC Power source
Brown
Blue
E3JK
Light
Light
E3JK
E3JK
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Sensitivity adjuster (built-in diffuse reflective models only)
E3JK-5jj
Weight: approx. 360 g
40 22
12
Mounting Holes
A (see note)
18 13.4
Indicator Lens
Note:
The mounting bracket (provided with two M4 x 20 screws) can be connected to side A.
Reflectors
E39-R1 (Supplied with Retroreflective Types)
7.5 2.7 Two, 3.5 dia. holes 40.3 34
52 59.9 62.1
59.9
90.9
52.0
8 1.6
6.5 74.5
E3JK
E3JK
WARRANTY
OMRONs exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NONINFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRONS ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRONs test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the users programming of a programmable product, or any consequence thereof.
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company Sensing Devices Division H.Q. Industrial Sensors Division Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Tel: (81)75-344-7022/Fax: (81)75-344-7107