Académique Documents
Professionnel Documents
Culture Documents
DANGER CAUTION
Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury. Indicates that incorrect handling may cause hazardous conditions, resulting in medium or slight personal injury or physical damage.
Note that the ! CAUTION level may lead to a serious consequence according to the circumstances. Always follow the instructions of both levels because they are important to personal safety.
Please save this manual to make it accessible when required and always forward it to the end user.
[Design Instructions]
DANGER
When performing data changes or status control from the personal computer to the running PLC, configure up an interlock circuit outside the PLC system to ensure that the whole system will operate safely. In addition, predetermine corrective actions for the system so that you can take measures against any communication error caused by a cable connection fault or the like in online operations performed from the peripheral device to the PLC.
CAUTION
Read the manual carefully before performing the online operations (especially forced output and operating status change) which will be executed with the personal computer connected to the running CPU module. Not doing so can damage the machine or cause an accident due to misoperation.
REVISIONS * The manual number is given on the bottom left of the back cover. Print Date Oct, 2008 Feb, 2009 Jun, 2009 * Manual Number BAD-804Q004-A0 BAD-804Q004-A1 BAD-804Q004-A2 Revisions First edition Partial Correction Chapter 2 Correction Chapter 1 Chapter 2 Correction Chapter 1
Jun, 2011
BAD-804Q004-A3
This book applies to the Mitsubishi Electric Corporation MESInterface IT product components and to all subsequent releases and modifications until otherwise indicated in new editions. Make sure you are using the correct edition for the level of the product. MITSUBISHI ELECTRIC CORPORATION PROVIDES THIS BOOK "AS IS," WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions therefore, this statement may not apply to you. This book could contain technical inaccuracies or typographical errors. Changes are made periodically to the information herein. Mitsubishi Electric Corporation may make improvements and changes at any time to the product(s) and/or program(s) described in this book. When you send information to Mitsubishi Electric Corporation, you grant Mitsubishi Electric Corporation a nonexclusive right to use or distribute the information in any way it believes appropriate, without incurring any obligation to you.
Preface
Chapter 0
Welcome to MESInterface IT. Mitsubishi Electric Corporations MESInterface IT product combines an Q12DCCPU-V module (a QCPU), the MESInterface IT software that runs on the module and a Workbench program to support their Mitsubishi Q Series programmable logic controller. The system enables backplane communication between the plant floor and the business enterprise. This book is your first step to using this product.
Preface
Preface
Terminology
This section is your starting point and as such provides the terminology associated with the MESInterface IT environment. Use this terminology as a reference for the rest of this book. Some of the terms and descriptions were taken from the IBM Terminology and the Microsoft Computer Dictionary. The following terms are listed in alphabetic order. Term access privileges Description Permissions set by an administrator that allow or deny users access to certain features of the Workbench such as a tag write operation. By setting access privileges, the administrator controls user access to restricted data and functions. A printed circuit board at the back of the programmable logic controllers chassis that provides electrical interconnection and communication between the modules inserted into the chassis. This is the application that is running on the Mitsubishi Q Series family of controllers. The software supports ladder logic, sequential function chart, structured text, and function block programming languages. A programmable device with physical access to plant floor equipment such as motors, sensors, values, pumps, and so forth. An example is the Mitsubishi Q Series controller. Also referred to as a
backplane
control program
controller
ii
Preface
Preface
Description A hardware and embedded software appliance that fits in a slot on the Mitsubishi Q Series logic controllers rack and runs the
MESInterface IT software.
enterprise system device variable Refers to servers running high-end business applications such as ERP. An identifier for the location of an address space in the controllers memory. This pertains to the Mitsubishi Q Series controller. A holding variable. Pertains to triggers. A number assigned to the Q12DCCPU-V module to uniquely identify it. programmable logic controller A variable that retains its value between invocations of triggers.
Related documentation
There is related documentation available that provides additional information on how to use MESInterface IT. Quick Start available in PDF format from the Workbench Help menu. Users Guide for in PDF format for the Workbench. Online Help available from the Workbench Help menu. You must have a browser installed to use this feature.