Académique Documents
Professionnel Documents
Culture Documents
NQDI KPIs
Manual November 2010
SwissQual License AG Allmendweg 8 CH-4528 Zuchwil Switzerland t +41 32 686 65 65 f +41 32 686 65 66 e info@swissqual.com www.swissqual.com
SwissQual has made every effort to ensure that eventual instructions contained in the document are adequate and free of errors and omissions. SwissQual will, if necessary, explain issues which may not be covered by the documents. SwissQuals liability for any errors in the documents is limited to the correction of errors and the aforementioned advisory services. Copyright 2000 - 2010 SwissQual AG. All rights reserved. No part of this publication may be copied, distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language without the prior written permission of SwissQual AG. Confidential materials. All information in this document is regarded as commercial valuable, protected and privileged intellectual property, and is provided under the terms of existing Non-Disclosure Agreements or as commercial-in-confidence material. When you refer to a SwissQual technology or product, you must acknowledge the respective text or logo trademark somewhere in your text. SwissQual, Seven.Five, SQuad, QualiPoc, NetQual, VQuad, Diversity as well as the following logos are registered trademarks of SwissQual AG.
Diversity Explorer, Diversity Ranger, Diversity Unattended, NiNA+, NiNA, NQAgent, NQComm, NQDI, NQTM, NQView, NQWeb, QPControl, QPView, QualiPoc Freerider, QualiPoc iQ, QualiPoc Mobile, QualiPoc Static, QualiWatch-M, QualiWatch-S, SystemInspector, TestManager, VMon, VQuad-HD are trademarks of SwissQual AG. SwissQual acknowledges the following trademarks for company names and products: Adobe, Adobe Acrobat, and Adobe Postscript are trademarks of Adobe Systems Incorporated. Apple is a trademark of Apple Computer, Inc. DIMENSION, LATITUDE, and OPTIPLEX are registered trademarks of Dell Inc. ELEKTROBIT is a registered trademark of Elektrobit Group Plc. Google is a registered trademark of Google Inc. Intel, Intel Itanium, Intel Pentium, and Intel Xeon are trademarks or registere d trademarks of Intel Corporation. INTERNET EXPLORER, SMARTPHONE, TABLET are registered trademarks of Microsoft Corporation. Java is a U.S. trademark of Sun Microsystems, Inc. Linux is a registered trademark of Linus Torvalds. Microsoft, Microsoft Windows, Microsoft Windows NT, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries U.S. NOKIA is a registered trademark of Nokia Corporation. Oracle is a registered US trademark of Oracle Corporation, Redwood City, California. SAMSUNG is a registered trademark of Samsung Corporation. SIERRA WIRELESS is a registered trademark of Sierra Wireless, Inc. TRIMBLE is a registered trademark of Trimble Navigation Limited. U-BLOX is a registered trademark of u-blox Holding AG. UNIX is a registered trademark of The Open Group.
Contents
1 Introduction .......................................................................................................................................... 1 Related Documentation ......................................................................................................................... 1 KPI Overview ......................................................................................................................................... 2 Accessibility ...................................................................................................................................... 2 Retainability .................................................................................................................................... 10 Integrity ........................................................................................................................................... 13 2 Services ..............................................................................................................................................21 Voice ....................................................................................................................................................21 GSM/UMTS .................................................................................................................................... 21 CDMA ............................................................................................................................................. 22 Data .....................................................................................................................................................22 TCP/IP ............................................................................................................................................ 22 Email............................................................................................................................................... 23 FTP ................................................................................................................................................. 24 HTTP .............................................................................................................................................. 26 Ping ................................................................................................................................................ 26 UDPDL ........................................................................................................................................... 26 WAP ............................................................................................................................................... 27 Messages ............................................................................................................................................28 MMS ............................................................................................................................................... 28 SMS ................................................................................................................................................ 28 Mobile TV .............................................................................................................................................28 DVB-H ............................................................................................................................................ 28 3 Indicators on Layer 3.........................................................................................................................29 Data (PS) .............................................................................................................................................29 Voice (CS) ...........................................................................................................................................30 2G ................................................................................................................................................... 30 3G ................................................................................................................................................... 31 Active set update ............................................................................................................................ 31 Cell Update ..................................................................................................................................... 32 4 Indicators on Layer 1.........................................................................................................................33 Scanner Based Measurements ...........................................................................................................33 Scrambling Code Coverage ........................................................................................................... 33 Pilot Pollution .................................................................................................................................. 33 Radio based Measurements ................................................................................................................33 Radio Link....................................................................................................................................... 33
Contents | CONFIDENTIAL MATERIALS ii
Power Control ................................................................................................................................. 34 A KPI Values ..........................................................................................................................................35 KPI Results Table ........................................................................................................................... 35 Accessibility Records ...........................................................................................................................35 Voice ............................................................................................................................................... 35 Data Services ................................................................................................................................. 41 Messages ....................................................................................................................................... 56 Data call setup ................................................................................................................................ 61 Security (CS) .................................................................................................................................. 67 Channels ........................................................................................................................................ 69 Coverage ........................................................................................................................................ 72 Retainability Records ...........................................................................................................................73 Voice ............................................................................................................................................... 73 Data Services ................................................................................................................................. 74 Messages ....................................................................................................................................... 88 Data Call ......................................................................................................................................... 90 Resource ........................................................................................................................................ 91 Integrity Records ..................................................................................................................................93 Telephony ....................................................................................................................................... 93 Data ................................................................................................................................................ 93 Messages ..................................................................................................................................... 103 Handover ...................................................................................................................................... 108 Resource ...................................................................................................................................... 117 Mobility ......................................................................................................................................... 117 Resource ...................................................................................................................................... 120 WCDMA........................................................................................................................................ 121 Status .................................................................................................................................................121 B KPI Calculation ................................................................................................................................123 Success Rate ............................................................................................................................... 123 Rejection Rate .............................................................................................................................. 123 Time.............................................................................................................................................. 123 PDF .............................................................................................................................................. 123 CDF .............................................................................................................................................. 124 95% Cut-Off point ......................................................................................................................... 124 C References .......................................................................................................................................125
Figures
Figure 2-1 Trace and Graph of a CS call on UMTS ........................................................................................ 21 Figure 2-2 Trace and Graph of a CS call on GSM .......................................................................................... 21
Contents | CONFIDENTIAL MATERIALS iii
Figure 2-3 Graph of a land originated CS call ................................................................................................. 22 Figure 2-4 The phases of a TCP connection ................................................................................................... 23 Figure 2-5 Email send...................................................................................................................................... 23 Figure 2-6 Email receive procedure ................................................................................................................ 24 Figure 2-7 FTP downlink.................................................................................................................................. 25 Figure 2-8 FTP uplink ...................................................................................................................................... 25 Figure 2-9 Ping test ......................................................................................................................................... 26 Figure 2-10 UDPDL process ........................................................................................................................... 27 Figure 2-11 WAP test ...................................................................................................................................... 27 Figure 2-12 MMS trace .................................................................................................................................... 28 Figure 2-13 SMS trace..................................................................................................................................... 28 Figure 3-1 Trace and Graph of a data call on UMTS ...................................................................................... 29 Figure 3-2 PDP Context................................................................................................................................... 29 Figure 3-3 Authentification and ciphering ........................................................................................................ 30 Figure 3-4 Signal channel and traffic channel assignment and release on GSM ........................................... 30 Figure 3-5 TMSI Reallocation and Handover .................................................................................................. 30 Figure 3-6 Trace of an active set update ......................................................................................................... 31 Figure 3-7 Call Setup ....................................................................................................................................... 31 Figure 3-8 RadioBearer reconfiguration .......................................................................................................... 32 Figure 3-9 Trace of the cell update .................................................................................................................. 32 Figure 4-1 Data available from the scanner .................................................................................................... 33 Figure 4-2 Addition and removals of radio links .............................................................................................. 34 Figure 4-3 Power control values ...................................................................................................................... 34 Figure A-1 IP Trace of Email upload (send) .................................................................................................... 41 Figure A-2 IP Trace of an Email download (receive) ....................................................................................... 43 Figure A-3 IP Trace of a FTP Downlink ........................................................................................................... 46 Figure A-4 IP Trace of a HTTP download ....................................................................................................... 49 Figure A-5 IP Trace of an UDPDL test ............................................................................................................ 54 Figure A-6 IP Trace of a WAP download ......................................................................................................... 56 Figure A-7 Application trace of a MMS upload (sent) ...................................................................................... 57 Figure A-8 Application trace of an SMS upload (sent) .................................................................................... 59 Figure A-9 Trace of an Email Receive test ...................................................................................................... 77 Figure A-10 IP Trace of a FTP download ........................................................................................................ 79 Figure A-11 Trace of a UDP DL test ................................................................................................................ 84 Figure A-12 Trace of a WAP test ..................................................................................................................... 86 Figure A-13 Trace of a Ping test ...................................................................................................................... 87 Figure A-14 Trace of a MMS Send test ........................................................................................................... 89 Figure A-15 Trace of a SMS Send test ............................................................................................................ 90 Figure A-16 SMS Trace ................................................................................................................................. 105
Contents | CONFIDENTIAL MATERIALS iv
Figure A-17 WCDMA Layer 3 Signalling (filtered) ......................................................................................... 114 Figure B-1 Probability Density Function (PDF).............................................................................................. 124 Figure B-2 Cumulative Density Function (CDF) ............................................................................................ 124
Tables
Table A-1 KPI Results Table ........................................................................................................................... 35 Table A-2 Error Codes and Status field ......................................................................................................... 122 Table B-1 Table for rates and averages ........................................................................................................ 123
Introduction
This document contains a description of all the KPIs (Key Performance Indicators) measured and reported with Diversity and QualiPoc data in NQDI. This list of KPIs represents a summary from inputs from the Experts within ETSI, SwissQual KPI definitions and various customer requests. THhe structure of the KPIs follow the principles of the document ITU P-800 where the accessibility, retainability and integrity are the key aspects of the assessment of quality in telecommunications. The concept of accessibility has been enlarged to accommodate customer requests for KPIs considering the completion of a service. It spans from the request of a service to its successful completion. Since the access to the service is essential to its completion these KPIs are regarded as belonging to the accessibility group. The described KPIs are to be found on the KPI sheet of the NQDI Analysis tab and as a report item in the Report Generator. The usage of the Report Generator is described in detail in the NQDI manual. The calculation of the KPIs is automatically when the trigger points are available. Depending on the data collection application type and mode used (Diversity, QualiPoc) maybe only a limited choice of KPIs is available.
Related Documentation
For a description of the NQDI Database Structure, see: Manual-NQDI database structure.pdf For a description of the Voice Test Measurement Results, see: Manual-Result Description.pdf For a description of the Data Test Measurement Results, see: Manual-Data Test Result description.pdf
KPI Overview
The following legend is for the KPI tables in this section. The ETSI reference document is TS 102 250 - 2 V.1.7.1 Item
* + QP ()
Description
Not implemented as KPI and not available as Report Item Available In Report Generator but no explicit KPI Item Only with QualiPoc available ETSI definition almost equivalent IP Protocol Layer 3 Message Phone or log trace Message Scanner
Accessibility
Accessibility
KPI ID Stratum Type Function Start Trigger Event
Channel Request / RRCConnectionRequest Telephony Telephony Service (MTC Dial) CC: Alerting SuccessRate Duration 6.6.1/6.7.3 6.6.2/6.7.4
Parameter
End Trigger Event Status Value 1
ETSI Parameter
Success Rate Time
10100
10102
Voice (CS)
Service
CM Service Request
CC: Alerting
SuccessRate
Duration
Accessibility
KPI ID Stratum Type Function
Video Call Video Setup
Parameter
End Trigger Event Status Value 1
ETSI Parameter
Success Rate Time
10105
RRCConnectionRequest
SuccessRate
Duration
10110
Telephony Completion Paging Delay MTC Telephony MTC Telephony MTC intermediate Telephony MTC Request Delay Telephony Random Access Telephony Completion MTC Telephony Completion MTC Paging Email send Data Email send Completion
CC: Disconnect
SuccessRate
Duration
10141
Dial
SuccessRate
Duration
10150
Paging
CC: Alerting
SuccessRate
Duration
10151
CC: Alerting
SuccessRate
Duration
10152
Paging
SuccessRate
Duration
10153
Dial
SuccessRate
Duration
10160
Dial
SuccessRate
Duration
10165 10200
SuccessRate SuccessRate
> 25 [SYN]
SuccessRate
Duration
7.2.6
7.2.7 3
CONFIDENTIAL MATERIALS
Accessibility
KPI ID
10201
Parameter
End Trigger Event
Response:+ OK and octets or bytes IMAP4 Response:OK and user and authenticated
ETSI Parameter
Success Rate
7.2.11
Stratum
Type
Function
Email receive IMAP Email receive LOGIN Email receive Completion FTP UL FTP DL FTP UL (B) FTP DL (B) FTP UL Completion Service Access FTP UL (B) FTP DL Completion Service Access FTP DL (B) HTTP Browser HTTP Transfer Get HTTP Transfer Put
Status
SuccessRate
Value 1
Duration
Time
7.2.12
10203
SuccessRate
Duration
7.2.11
7.2.12
> 110 [SYN] > 21 [SYN] > 21 [SYN] > 21 [SYN] > 21 [SYN]
Last continuation First FTP Data First FTP Data Reception of [Ack] from the [Syn;Ack] Reception of [Ack] from the [Syn;Ack]
10310
> 21 [SYN]
SuccessRate
Duration
6.1.5
6.1.6
10320
SuccessRate
Duration
6.1.1 (B)
6.1.2 (B)
10311
> 21 [SYN]
SuccessRate
Duration
6.1.5
6.1.6
10321 10400
SuccessRate SuccessRate
Duration Duration
10401
> 80 [SYN]
SuccessRate
Duration
6.8.3 (A)
6.8.4 (A)
10402
> 80 [SYN]
PUT
SuccessRate
Duration
Accessibility
KPI ID Stratum Type Function
HTTP Browser (B) HTTP Browser Completion HTTP Transfer GET Completion HTTP Transfer PUT Completion Service Access HTTP Browser (B) Service HTTP Transfer GET (B) Service HTTP Transfer PUT Network Access HTTP Network Access WAP Portal
Parameter
End Trigger Event Status Value 1
ETSI Parameter
Success Rate Time
10407
> 80 [SYN]
SuccessRate
Duration
6.8.3 (B)
6.8.4 (B)
10410
> 80 [SYN]
Last Continuation
SuccessRate
Duration
6.8.5
6.8.6
10411
> 80 [SYN]
Last Continuation
SuccessRate
Duration
6.8.5
6.8.6
10412
> 80 [SYN]
SuccessRate
Duration
10420
SuccessRate
Duration
6.8.1 (B)
6.8.2 (B)
10421
SuccessRate
Duration
6.8.1 (B)
6.8.2 (B)
10422
SuccessRate
Duration
10425
HTTP/1.n 200 OK
SuccessRate
Duration
QP
10430
SuccessRate
Duration
QP
10450
Accessibility
KPI ID Stratum Type Function
HTTP Page DL Cycle HTTP File DL Cycle UDPDL
Parameter
End Trigger Event Status Value 1
ETSI Parameter
Success Rate Time
10451
HTTP Get
Last HTTP/1.n complete Last HTTP/1.n complete before new HTTP Get Source port RTSP: RTP Payload Resized, Buffering
SuccessRate
Duration
QP
10452 10500
SuccessRate SuccessRate
Duration Duration
QP
10600
Video Streaming
HTTP: HTTP Get or RTSP continuation RTSP DESCRIBE HTTP: HTTP Get or RTSP continuation RTSP DESCRIBE RTSP: RTSP Setup
SuccessRate
Duration
10601
Video Streaming Play Video Streaming (Setup) Network Access Video Streaming WAP WAP Completion MMS Send Message
SuccessRate
Duration
10605
SuccessRate
Duration
10610 10700
SuccessRate SuccessRate
QP
10710 10800
SuccessRate SuccessRate
Duration Duration
10801
MMS Receive
TRANSMISSION STARTED
SuccessRate
Duration
Accessibility
KPI ID Stratum Type Function
WAP Gateway connect SMS Send Post Dial Delay Active State SIP Call Access EVDO Post Dial Delay Dormant State Mobile TV DVB-H Menu DVB-H 11610 15000 15100 15101 Data (CS) Mobile TV DVB-H Channel Telephony Attach Detach Attach Completion Data (PS) Attach (P3) [AT+ CGATT=1] Activate PDP Context Request [OK]
Parameter
End Trigger Event Status Value 1
ETSI Parameter
Success Rate Time
10805 10900
START START
SuccessRate SuccessRate
Duration Duration
11000
SIP INVITE
180 RINGING
SuccessRate
Duration
11010
SIP 200 OK
SuccessRate
Duration
11500
180 RINGING
SuccessRate
Duration
11600
Service Request
SuccessRate
Duration
6.2.2
6.2.3
Streaming Started (DVB-H Channel added) Valid Server Response Attach Accept or Reject Detach Accept
6.2.4
6.2.5 *
5.3
5.4
15102 15105
Layer 3
Attach Request
Attach Complete
SuccessRate SuccessRate
Duration Duration
15200
Activate PDP Context Accept or Reject SuccessRate Duration 5.5 5.6 7 CONFIDENTIAL MATERIALS
Chapter 1 | Introduction
Accessibility
KPI ID Stratum Type Function Start Trigger Event
Dectivate PDP Context Request
Parameter
End Trigger Event Status Value 1
ETSI Parameter
Success Rate Time
15201 15202
ActivatePDPContext Accept
SuccessRate
15203
Deactivate PDP Context Completion Activate PDP Context (P3) IP Service Access
15205
First IPCP Configuration Request Activate PDP Context Request Authentification and Ciphering Request Ciphering Mode command
SuccessRate
Duration
15250
FirstPacket of accessed service Authentification and Ciphering Response or Failure or Reject Ciphering Mode complete Authentification Response or Failure or Reject IdentityResponse
SuccessRate
Duration
15300 15400
Authentification Ciphpering
SuccessRate SuccessRate
Duration Duration
15500 15550 CS
Authentification Identity Call Setup Signalling 2G Call Setup Signalling 3G 2G Traffic Channel
SuccessRate SuccessRate
Duration Duration
15560
Assignment Command
SuccessRate
Duration
15570 15600
SuccessRate SuccessRate
Duration Duration
Accessibility
KPI ID Stratum Type Function
Call Access Traffic Channel Traffic Channel Completion Signal Channel CDMA Call Access Traffic Channel Traffic Channel
Parameter
End Trigger Event
Assignment Complete or Failure/ RadioBearerSetupComplete or Failure
ETSI Parameter
Success Rate Time
Status
Value 1
15610
CM Service Request
SuccessRate
Duration
16050 15700
SuccessRate SuccessRate
Duration Duration
16310 15800
SuccessRate SuccessRate
Duration Duration
15900 3G 16000
Security Signal Channel Signal Channel Completion Coverage Layer 1 2G GPRS Availability
SuccessRate SuccessRate
Duration Duration
16050 16100
RRCConnectionRequest C1 > 0
RRCConnectionRelease
SuccessRate SuccessRate
Duration 5.1 *
16200
SI 13 on BCCH
SuccessRate
5.1
Retainability
Retainability
KPI ID
20100 20101 20200 20201
Parameter
End Trigger Event
Disconnect Disconnect Response: Message accepted - half roundtrip Last Continuation Response: Cx OK FETCH completed (x must match with id from Request) Response: Message accepted Last Continuation
ETSI Parameter
Success Rate
6.7.7 6.6.5 (7.2.9) (7.2.9)
Stratum
Type
Function
Telephony Telephony Email send Email receive IMAP Email Receive Email send
Status
SuccessRate SuccessRate SuccessRate SuccessRate
Value 1
Duration Duration Duration Duration
Time
Voice (CS)
Email receive IMAP Email Receive Header FTP UL FTP DL FTP UL(V) FTP DL(V)
FETCH 1 (RFC822.HEADER) FTP Data FTP Data - half roundtrip FTP Data FTP Data Reception of [ACK] from the [SYN;ACK]
Response: Cx OK FETCH completed (x must match with id from Request) [FIN;ACK] - half roundtrip Last FTP DATA First [FIN;ACK] for the last FTP DATA Last FTP DATA
7.2.9
7.2.10
20307
FTP UL(B)
SuccessRate
Duration
6.1.8 (B)
10
Retainability
KPI ID Stratum Type Function Start Trigger Event
Reception of [ACK] from the [SYN;ACK] HTTP/1.1 200 OK - half roundtrip HTTP/1.1 200 OK - half roundtrip
Parameter
End Trigger Event Status Value 1
ETSI Parameter
Success Rate Time
20308
FTP DL(B)
SuccessRate
Duration
6.1.8 (B)
20400
HTTP Browser HTTP Transfer GET HTTP Transfer PUT HTTP Browser (V) HTTP Browser (B) UDPDL
Last Continuation
SuccessRate
Duration
20401
Last Continuation
SuccessRate
Duration
20402
PUT
SuccessRate
Duration
20405
HTTP/1.1 200 OK Sending of GET command Source port RTSP: TDP Payload
Last Continuation
SuccessRate
Duration
6.8.8
20407 20500
Last Continuation Source port HTTP: [FIN; ACK] ; RTSP : TEARDOWN QualiPoc QP TEARDOWN HTTP: [FIN; ACK] ;
SuccessRate SuccessRate
Duration Duration
6.8.8
20600
Video Streaming
Resized or Buffering
SuccessRate
Duration
6.5.6
20601
RTSP : TEARDOWN PLAY (RTSP PLAY) WSP Reply half roundtrip TRANSMISSION STARTED QualiPoc QP TEARDOWN
20700 Messag e
WAP
SuccessRate
Duration
6.11.10
6.11.11
20800
MMS Send
TRANSMISSION FINISHED
SuccessRate
Duration
11
Retainability
KPI ID Stratum Type Function Start Trigger Event
NOTIFICATION RECEIVED SEND SMS START
Parameter
End Trigger Event Status Value 1
ETSI Parameter
Success Rate Time
20801 20900
MMS Receive SMS Echo (Ping) request Data SIP Call Completion Mobile TV DVB-H Channel Telephony (Data CS)
SuccessRate SuccessRate
21000
SuccessRate
Duration
6.3
21010
SuccessRate
Duration
SuccessRate
Duration
25000
Valid Server Response Activate PDP Context Accept Activate PDP Context Accept Attach accept Assignment Complete RRCConnectionSetupCo mplete RadioBearerSetup RadioBearerReconfigurati on
Intentional Termination
SuccessRate
Duration
SuccessRate
Duration
5.7
25400
RRCConnection Release
SuccessRate
Duration
3.5G 26100
12
Integrity
Integrity
KPI ID
30100 30101
Parameter
Trigger/Measurement
SpeechQuality CC:Release
ETSI Parameter
Time
6.6.4
Stratum
Type
Voice (CS)
Function
Telephony Telephony Exit
Trigger/Measurement
Speech Samples CC: Disconnect Transmission Duration 20200 Transmission Duration 20201 Transmission Duration 20203 Transmission Duration 20205 Transmission Duration 20206 Transmission Duration 20300 Transmission Duration 20301 Transmission Duration 20305 Transmission Duration 20306 Transmission Duration 20307
30200
Email send
Transferred Data
Throughput
30201
Transferred Data
Throughput
30203
Transferred Data
Throughput
7.2.8
30205 Service
Email send
Transferred Data
Throughput
7.2.8
30206
Transferred Data
Throughput
7.2.8
30300
FTP UL
Transferred Data
Throughput
30301
FTP DL
Transferred Data
Throughput
30305
FTP UL(V)
Transferred Data
Throughput
6.1.7 (A)
30306
FTP DL(V)
Transferred Data
Throughput
6.1.7 (A)
30307
FTP UL(B)
Transferred Data
Throughput
6.1.7 (B)
13
Integrity
KPI ID Stratum Type Function Trigger/Measurement
Transmission Duration 20308 Transmission Duration 20400 Transmission Duration 20401 Transmission Duration 20402 Transmission Duration 20405 Transmission Duration 20407 Transmission Duration RTSP: TDP Payload Video Streaming 30600 HTTP: Resized or Buffering [SYN] Displaying
Parameter
Trigger/Measurement
ETSI Parameter
Time
30308
FTP DL(B)
Transferred Data
Throughput
6.1.7 (B)
30400
HTTP Browser HTTP Transfer GET HTTP Transfer PUT HTTP Browser(V) HTTP Browser(B) UDP
Transferred Data
Throughput
(6.8.7 (A))
30401
Transferred Data
Throughput
6.8.7 (A)
30402
Transferred Data
Throughput
30405
Transferred Data
Throughput
6.8.7 (A)
30407 30500
Throughput Throughput
6.8.7 (B)
Duration
6.5.10
6.5.11
30605
Duration
30606
RTSP : TEARDOWN
30607
[SYN]
14
Integrity
KPI ID Stratum Type Function Trigger/Measurement
Transmission Duration 30700 WAP START (MO) 30800 MMS E2E MMS Notification Messa ge 30803 MMS Sent Time MMS Retrieval Time SMS E2E TCP RTT SIP Call Completion DNS Host resolution TRANSMISSION FINISHED (MO) TRANSMISSION STARTED (MO) TRANSMISSION STARTED (MT) SEND SMS START [SYN] TRANSMISSION FINISHED (MT)
Parameter
Trigger/Measurement
Transferred Data Throughput
ETSI Parameter
Time
6.11.9
Success Rate
Duration
7.3.8
7.3.9
30801
Success Rate
Duration
7.3.6
7.3.7
Success Rate
Duration
7.3.2
7.3.4
7.3.3 7.4.4
7.3.5 7.4.5 +
31010
SIP 200 OK
Success Rate
Duration
31100
Success Rate
Duration
5.10
5.11
31610
DVBH
33200
RRCConnectionReleaseComplete
Success Rate
Duration
15
Integrity
KPI ID Stratum Type Function
Routing Area Update Routing Area Update Access
Parameter
Trigger/Measurement
ETSI Parameter
Time
Trigger/Measurement
Routing Area Update Request Channel Request / RRCConnectionRequest TMSIReallocationComma nd Handover Command
34000
Success Rate
Duration
34004
Success Rate
Duration
34010 34050
TMSI Handover Channel Modify 2G Intracell Handover Location Location Update Access
Duration Duration
34060
2G
Success Rate
Duration
34070 35003
Duration Duration
35004
Success Rate
Duration
35010 2G/3G
Compress Mode
tgps_Status activate Inter System to UTRAN Handover Command HandoverFromUTRANCo mmand-GSM CellChangeOrderFromUT RAN CellChangeOrderFromUT RAN
Success Rate
Duration
35020
InterSystemHO
HandoverToUTRANComplete or Failure Handover Complete or HandoverFromUTRAN Failure First GSM SystemInformation after CellChange
Success Rate
Duration
35030
InterSystemHO
Success Rate
Duration
35040
Success Rate
Duration
Success Rate
Duration 16
CONFIDENTIAL MATERIALS
Integrity
KPI ID Stratum Type Function
InterSystemHO Interruption
Parameter
Trigger/Measurement
ETSI Parameter
Time
Trigger/Measurement
CellChangeOrderFromUT RAN Last GSM SystemInformation before CellChange Last GSM SystemInformation or Paging before CellChange
35042
First IP Packet
Success Rate
Duration
35050
InterSystemHO
CellChange
Success Rate
Duration
35060
InterSystemHO
First UMTS RRC Message First GSM SystemInformation or Paging after CellChange
Success Rate
Duration
35070
InterSystemHO
Success Rate
Duration
P-TMSI Handover Cell Update 3G- Inter Frequency Reselection 3G Inter Frequency Handover
35105
Last old UARFCN report PhysicalChannel/Transpor tChannel/RadioBeareReco nfiguration RadioBearerReconfigurati on with HSDSCH_RL_indicator falseand true RadioBearerReconfigurati on with false HSDSCH_RL_indicator and delete hsdsch channel
Success Rate
Duration
3G 35106
PhysicalChannel/TransportChannel/RadioBear eReconfigurationComplete
Success Rate
Duration
35110
Integrity
KPI ID Stratum Type Function Trigger/Measurement
RadioBearerReconfigurati on
Parameter
Trigger/Measurement
RadioBearerReconfigurationComplete or Failure
ETSI Parameter
Time
35200
Resource Routing Area Update Physical Channel Signaling Channel Transport Channel UTRAN Mobility UE Capability
Success Rate
Duration
35300
URAUpdateConfirm
Success Rate
Duration
35400
PhysicalChannelReconfigurationComplete
Success Rate
Duration
35500
SignalingChannelReconfigurationComplete
Success Rate
Duration
* * *
Duration
Coding Scheme Duration Time Slot Allocation Duration Transmission Duration Transmission Duration Errorneous Blocks
Duration
+ + + +
18
Integrity
KPI ID Stratum Type Function
RxQualFull RxQualSub RxLevFull RxLevSub RxLev TA GSM Tx Power Current Server C/I Best Server C/I Current Server RxLev Best Server RxLev HO (CellId) Best Ec/Io Best_RSCP WCD MA Best Ec/Io Best RSCP Total Ec/Io Chapter 1 | Introduction CONFIDENTIAL MATERIALS Measurement Sample Value
Parameter
Trigger/Measurement
Value Value Value Value Value Value
ETSI Parameter
Time
+ + + + + + +
Trigger/Measurement
Measurement Sample Measurement Sample Measurement Sample Measurement Sample Measurement Sample Measurement Sample
Value Value
+ +
Measurement Sample
Value
Measurement Sample Different Cells Measurement Sample Measurement Sample Measurement Sample Measurement Sample Measurement Sample
+ * + + + + + 19
Integrity
KPI ID Stratum Type Function
Total RSCP HO Areas UE TX POWER UE RX POWER BLER Current SIR Coverage area per SC Pilot pollution
Parameter
Trigger/Measurement
Value Number Value Value Value Value
ETSI Parameter
Time
+ + + + + *
Trigger/Measurement
Measurement Sample Different Cells Measurement Sample Measurement Sample Measurement Sample Measurement Sample
Measurement Sample
Value
+ +
20
Services
Voice
The performance KPIs for circuit switched (voice) calls are obtained with the help of a set of trigger points that can be found in the layer 3 communication between the MS and the network or as Call markers in the case of a call from the land unit.
GSM/UMTS
The call setup success rate and time is calculated for UMTS (GSM) by using the RRCConectionRequest (Channel Request in GSM) and the alerting message for the MOCs. The call retained rate and duration is calculated using the alerting and the disconnect message.
The call completion rate is thereby calculated as retained calls divided by the sum of failed and successful setups.
On the layer 3 plane the 3G and 2G calls are comparable, but the request for a signalization resource is different. The former starts with a RRCConnectionRequest, the latter with Channel Request. In principle a call starts with the dial command (see overview table) or the user pushing the dial button. In reality this dial command is executed in different ways on different phones. There are phones although fully integrated into the measurement system, simulating the manual dialling. As a consequence the times between dial command and first request differ significantly on phones from different vendors. To keep the comparability between different models the start trigger point is the first request for a signalisation channel.
Chapter 2 | Services CONFIDENTIAL MATERIALS 21
For calls originated by the land unit, the trigger point of the call start is represented by the dial command sent to the PSTN or ISDN device.
CDMA
In CDMA there is no layer 3 signalisation that the call is connected with the called party therefore there is no call setup KPI. However there is one for the access. But since the sequence of layer 3 messages in CDMA voice service differs from UMTS/GSM it has separate KPIs with respective it trigger points.
Data
The data tests make use of three different protocols: TCP, UDP and WAP. Predominant is the TCP or TCP/IP protocol that supports various known applications. UDP is tested on the protocol level and with WAP the application and the protocol is identical.
TCP/IP
The TCP/IP connection consists in general of three different phases: Establishment, transfer and disconnect. In the Data tests individual applications are investigated (such as FTP up- and download, Email sent and receive and HTTP). While FTP has an establishment as well as a disconnect phase, the others maybe doesnt have either. The connection establishment on the TCP level is shown in Figure 2-4 where the three phases are clearly distinguishable. Every TCP connection has an establishment phase. However a HTTP server can end a connection without the exchange of packets with the FIN flag set.
22
For performing a HTTP download, the GET command is send right away triggering the establishment of a TCP connection. There is no further exchange of commands on the HTTP protocol level. The GET command is set in brackets because in the trace, it does not occur at that position. It only shows itself after the connection is established. The starting point of the access duration is the time the [SYN] is sent, triggered by entering the GET command. Therefore the application download duration starts at that time too. As the figures suggest, there are two different download and upload times indicated. The TCP down- and upload time is the time, the network needs to actually transfer the desired bytes, which reflects the efficiency of the connection. The application transfer duration is actually the time, which the user is experiencing. Its the time the application needs to execute the desired function. The size of the file on the hard disk, (HD) divided by the time, indicated in the figure as TCP download time, is the throughput. The calculation for the uplink is analog to the downlink with the difference that an additional time is added, which reflects the duration the last FTP Data packet needs, to arrive at the server.
Email
The process of the test is traced on the protocol level, which is presented in the protocol info tab in NQDI. This trace represents the basis of the evaluation of the test. The steps of the Email send test are shown below.
The test of the application is divided into service access, service application and service throughput. The
Chapter 2 | Services CONFIDENTIAL MATERIALS 23
service access is the time between entering the first command and the arrival of the first data packet. The establishment of the TCP connection is triggered by the invoke of the protocol. E.g. > telnet 110 n the contrary because SMTP is running on the server, the start of the application is the actual upload command to the server. To obtain the correct TCP download duration, it is necessary to add a half-roundtrip time. This is due to the consideration, that the last packet needs a finite time to arrive at its destination. This addition may not match the exact delay of the packet, but it renders the result more accurate as if there were no additional time considered. For the Email Receive this additional time is half the time between the request and the first packet.
FTP
During the FTP tests a secondary data connection is established. (In the figure below, the trace of this secondary connection is shown with smaller arrows) The items in brackets like (ftp) reflect commands that may not occur in the trace but have to be executed to trigger the establishment of the TCP connection. In the FTP uplink test the last packet containing data has the FIN flag set. This indicates that the client closes the connection. The trigger points to calculate the TCP throughput are indicated in the following picture. It is calculated from the first to the last FTP Data packet and in addition the time, which the first packet needs to arrive at the client.
24
The size of the file on the hard disk, (HD) divided by the time, indicated in the figure as TCP download time, is the throughput. The calculation for the uplink is analog to the downlink with the difference that an additional time is added, which reflects the duration the last FTP Data packet needs, to arrive at the server.
25
HTTP
According to the RFC 2126 a HTTP server does not need to close the TCP connection with the setting the FIN flag. The browser can identify the end of the HTTP packet sending within the packet itself.
Ping
The ping does not use the TCP protocol but is a command of the ICMP protocol. The round trip time of a ping represents the time elapsed between the sending of an ICMP echo request and the answer of the destination. In the protocol trace, where these events are taken from, it is calculated by the difference between a request and the subsequent reply.
The success rate is the number of request divided by the number of received replies.
UDPDL
The UDPDL test is a pure protocol test. There is no known application used in this test. The access duration is the time between sending the SQUDPDL command to the server and the arrival of the first packet.
26
The throughput for this test is calculated by dividing the transferred data in bytes (minus the size of the first packet) and the time elapsed between the arrival of the first and the arrival of the last packet.
WAP
Contrary to the applications described above the WAP (wireless application protocol) test has no separate transport protocol.
The application starts with the connect command. The application is successful accessed when the first packet that contains data has arrived. This first packet can either be a result, indicating that there are others to come, or a reply, indicating that all requested information is transferred. The last data packet is always a reply.
27
Messages MMS
The multi media messaging service (MMS) is an application of WAP and SMS. The WAP capabilities are used to transfer the data of the message while the SMS serves as the notification. Although is consists of known functionalities, this service is highly specific for mobile equipment and is therefore tested individually.
The measured parameters are those, which are specified by ETSI in the document TS 102 250-2.
SMS
Like MMS, a SMS is separated in a sending and retrieving part. For the reception it is less evident since we cannot speak of a process here. With the indication of a SMS the actual text is retrieved. There is no download- time available.
Mobile TV DVB-H
Digital Video Broadcast (DVB) is a transmission system to delivier digital TV. The H in the name is standing for the handheld variant, which implements a lot of special techniques particularly addressing the limitations of mobile. Although DVB-H uses IP as a tranport layer there is no direct access to with the consequence that the application layer information items are used as trigger events for DVB -H KPIs
28
Indicators on Layer 3
The desired times and the success rates calculating the layer 3 KPIs are based on the messages that are exchanged between the MS and the network. The phone gives a time wise and exact trace of these messages as they are sent and received by the mobile station. The messages can be seen in detail in the collection of data as well as in their post processing.
Data (PS)
The KPIs for data calls are obtained by using the resource request (RRCConnectionRequest for UMTS and Channel Request for GSM), the PDP context activation accept message and the PDP deactivation accept message. PDP context setup time is the difference between the RRCConnectionRequest and the PDP context activation accept message, while the PDP context holding time is the difference between the occurrence of the PDP context activation accept message and the PDP context deactivation accept message.
The information about the activation and deactivation times of the PDP context is extracted from the SM messages, which are embedded in the RRC messages of UMTS.
29
Voice (CS)
2G
The accessibility parameter for the GSM system is the acquisition of the traffic channel and the Signal channel
Figure 3-4 Signal channel and traffic channel assignment and release on GSM
Besides the establishment messages and the retain ability indicators there are other KPIs for the integrity of a call.
30
The different phases of the call setup on the layer 3 level are shown in the figure below. The occurrence of the message has a timestamp that is used to calculate the times between the occurrences of subsequent messages.
31
Cell Update
The cell update, the location update and the routing area update procedures are also traced via the RRC messages.
32
Indicators on Layer 1
The indicators from layer 1 are used for items of the report generator they are most of the times not explicit KPIs with their own ID but measurements.
Pilot Pollution
If at a given time more than three CPICHs are stronger than the best CPICH minus a 15 dB threshold the situation is considered pilot pollution. The report item shows the percentage of time there was pilot pollution.
33
The information about the changes in the active set is be found the RRC messages where the ActiveSetUpdate message indicates the type radio link change ordered by the network. In case a addition information list and a removal information list is present in the message the order is a radio link replacement if only the former is present its a radio link addition if only the latter the network orders a radio link removal
Power Control
The phone provides information about the UE Tx Power several times a second and about the block error rate (BLER)in lower frequency. The distribution of the obtained values is calculated using all measured samples.
34
KPI Values
All KPI values are stored in the NQDI Database in the KPI Result Table.
Column Name
SessionId TestId NetworkId PosId KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Type
int int int int int Datetime Datetime Int Int Float Int Int Int Varchar varchar Varchar
Length Description
4 4 4 4 4 SessionId Link to TestInfo.TestId Link to NetworkInfo.NetworkId Link to Position.PosId Identification of the KPI (see KPI Overview) Timestamp of the start trigger event Timestamp of the end trigger event 4 4 4 4 4 4 255 255 255 Duration in ms KPI Status field. Used to calculate the success rate Sum of all the values used for a KPI calculation (like sum of bytes transmitted/received, sum of LQ, Number of values of Sum. Used to calculate the avg Reserved Reserved
Value 10100
EndTime
35
Field KPIId
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 10100
0 0
Unused Unused Unused Unused Direction Name of the end event Unused
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
10102
Description
Voice (CS) Telephony Service CM Service Request. GSM/UMTS: Timestamp of CC:Alerting. If not available, then CC:Connect. If not available, then CC:ConnectAcknowledge Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Unused Unused Unused Unused Direction Name of the end event Unused
Field
KPIId StartTime EndTime Duration ErrorCode Sum
Value
10105
Description
Voice(CS) Telephony Video Setup time Timestamp of RRCConncetionRequest. If not available, then RRCConnectionSetupComplete. Video Connect marker Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
Unused
36 CONFIDENTIAL MATERIALS
Field
Counter Value1 Value2 Value3 Value4 Value5
Value
0
Description
Unused Unused Unused Name of the start event Name of the end event Unused
Field
KPIId StartTime
Value
10110
Description
Voice(CS) Telephony Completion GSM: Timestamp of Channel Request. UMTS: Timestamp of RRCConncetionRequest. If not available, then RRCConnectionSetup. If not available, then RRCConnectionSetupComplete. ISDN/PSTN: Timestamp of Dial command sent to the board GSM/UMTS: CC : Disconnect Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Session 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter
Value 10141
0 0
Unused Unused
37 CONFIDENTIAL MATERIALS
Field KPIId
Value1 Value2 Value3 Value4 Value5
Value 10141
Field
KPIId StartTime
Value
10150
Description
Voice(CS) Telephony MTC Timestamp when the first Paging occured. GSM: Paging. UMTS: RRC Paging Type 1 GSM/UMTS: Timestamp of CC:Alerting. If not available, then CC:Connect. If not available, then CC:ConnectAcknowledge Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Session 0 0
Unused Unused Unused Unused Unused Name of the end event Unused
Field KPIId
StartTime EndTime Duration ErrorCode Sum
Value 10151
Unused
38 CONFIDENTIAL MATERIALS
Field KPIId
Counter Value1 Value2 Value3 Value4 Value5
Value 10151
0
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
10152
Description
Voice(CS) Telephony MTC Request Delay GSM: Paging UMTS: RRCPaging Type 1 GSM: Channel Request UMTS: RRCConnectionRequest Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1
Value 10153
0 0
Field KPIId
Value2 Value3 Value4 Value5
Value 10153
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Session
Value
10160
Description
Voice(CS) Telephony Completion MTC (Landunit) ISDN/PSTN: Timestamp of Dial command sent to the board GSM: Channel Release UMTS: RRCConnectionRelease or RRCConnectionRelease-CCCH Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter
Appendix A | KPI Values
Value
Description
Field KPIId
Value1 Value2 Value3 Value4 Value5 Search scope: Session
Value
Description
Data Services
Field
KPIId StartTime
Value
10200
Description
Data, Email Send Timestamp of the TCP message 25 [SYN] which is the TCP connection establishment and synchronization of the sequence number for SMTP (Port 25) Timestamp of the SMTP command Message Body which indicates the begin of the message transmission Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Field KPIId
StartTime
Value 10210
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Note: Not implemented. Varchar Varchar 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Field KPIId
StartTime
Value 10201
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
42
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 10203
0 0
Varchar Varchar
Field KPIId
StartTime
Value 10211
0 0
Varchar Varchar
Field KPIId
Value5 Search scope: Test
Value 10211
Field
KPIId StartTime
Value
10300
Description
Data, FTP Uplink Timestamp of the TCP message 21 [SYN] which is the TCP connection establishment and synchronization of the sequence number for FTP (Port 21) Timestamp of the first FTP Data message which indicates the first transmitted data packet Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Field KPIId
StartTime
Value 10307
0 0
Varchar Varchar
Field KPIId
Value5 Search scope: Test
Value 10307
Field
KPIId StartTime
Value
10310
Description
Data, FTP Uplink Completion Timestamp of the TCP message 21 [SYN] which is the TCP connection establishment and synchronization of the sequence number for FTP (Port 21) Reception of [FIN;ACK] for the last FTP Data Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
10320
Description
Data, FTP Uplink Service Access Start RAS Dialup (ATD Command) Reception of [ACK] from the [SYN;ACK] Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
45
Field
KPIId StartTime
Value
10301
Description
Data, FTP Downlink Timestamp of the TCP message 21 [SYN] which is the TCP connection establishment and synchronization of the sequence number for FTP (Port 21) Timestamp of the first FTP Data message which indicates the first transmitted data packet Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Field
KPIId StartTime
Value
10308
Description
Data, FTP Downlink (B) Timestamp of the TCP message 21 [SYN] which is the TCP connection establishment and synchronization of the sequence number for FTP (Port 21) Reception of [ACK] from the [SYN;ACK] Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Field
KPIId StartTime
Value
10311
Description
Data, FTP Downlink Completion Timestamp of the TCP message 21 [SYN] which is the TCP connection establishment and synchronization of the sequence number for FTP (Port 21) Timestamp of the last FTP Data message which indicates the last transmitted data packet Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Field KPIId
StartTime
Appendix A | KPI Values
Value 10321
Field KPIId
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value 10321
0 0
Varchar Varchar
Field
KPIId StartTime
Value
10400
Description
Data, HTTP Browser Timestamp of the TCP message 80 [SYN] which is the TCP connection establishment and synchronization of the sequence number for HTTP (Port 80) Timestamp of the HTTP/1.1 200 OK message which indicates the successful connection to the HTTP Server Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar URL 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
48
Field
KPIId StartTime
Value
10401
Description
Data, HTTP Transfer Get Timestamp of the TCP connection establishment and synchronization of the sequence number for HTTP (Port 80) > 80 [SYN] > http [SYN] QP: 'TCP Socket Connecting' Timestamp of the message which indicates the successful connection to the HTTP Server HTTP/1.1 200 OK HTTP/1.0 200 OK after a GET QP: 200 OK, 301 or 302 Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar URL 0 0
49
Field KPIId
StartTime
Value 10402
EndTime
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar URL 0 0
Field
KPIId StartTime
Value
10407
Description
Data, HTTP Browser (B) Timestamp of the TCP message 80 [SYN] which is the TCP connection establishment and synchronization of the sequence number for HTTP (Port 80) Timestamp of the first Get Command Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar URL 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
50
Field
KPIId StartTime
Value
10410
Description
Data, HTTP Browser Completion Timestamp of the TCP message 80 [SYN] which is the TCP connection establishment and synchronization of the sequence number for HTTP (Port 80) Timestamp of the last Continuation message of the connection or the HTTP/1.1 % OK message if no continuation is present. (The download is successful if the test as such is marked as successful by the browser) Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar URL 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Field KPIId
StartTime
Value 10411
EndTime
0 0
Field
KPIId StartTime
Value
10412
Description
Data, HTTP Transfer Put Completion Timestamp of the TCP connection establishment and synchronization of the sequence number for HTTP (Port 80) > 80 [SYN] > http [SYN] QP: 'TCP Socket Connecting' Timestamp of the message which indicates the last packet has been sent successfully to the HTTP Server First [FIN;ACK] after last Continuation QP: Last packet sent Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar URL 0 0
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Appendix A | KPI Values
Value 10420
0 0
Varchar Varchar
52 CONFIDENTIAL MATERIALS
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
10421
Description
Data, HTTP Transfer Get Service Access Start RAS Dialup (ATD Command) QP: GPRS Dial Timestamp of the first GET Command Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
10422
Description
Data, HTTP Transfer Put Service Access Start RAS Dialup (ATD Command) QP: GPRS Dial Timestamp of the first PUT Command Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
53
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
10500
Description
Data, UDP DL Timestamp of the message Request: SQUDPDL% which the connect request message for the SwissQual UDP Downlink test Timestamp of first packet (Source port) after the ACK message which is the connect ack message for the SwissQual UDPDL test Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3
Appendix A | KPI Values
Value 10600
0 0
Varchar
Field KPIId
Value4 Value5 Search scope: Test
Value 10600
Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
10605
Description
Data, Video Streaming (Setup) According to the used protocol the timestamp of the RTSP: RTSP SETUP, message According to the used protocol the timestamp of the RTSP: TDP Payload or TCP: Loading message Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Appendix A | KPI Values
Value 10700
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
10710
Description
Data, WAP Completion Timestamp of the message WSP: Connect which is the connect request message on the WSP/WTP protocol Timestamp of the last WSP: Reply or WSP:Result message which is the last packet containing application data on the WSP/WTP port Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Messages
For the detailed mapping between the events in the log and the trigger points in the application see Data and Video Test Scenario Manual section MMS send and MMS receive.
Field KPIId
StartTime EndTime Duration Status Sum Counter
Value 10800
0 0
Unused Unused
56 CONFIDENTIAL MATERIALS
Field KPIId
Value1 Value2 Value3 Value4 Value5
Value 10800
Varchar Varchar
MO Network 1 o------------activate pdp context R E Q U E ST----------->>> 2 4 <<<--------activate pdp context AC C E PT-----------------o 5 o----------------wsp connect R E Q U E ST--------------->>> 8 <<<----------------wsp connect R E PLY -------------------o 3 6 7
9 o---------------------------wtp AC K---------------------->>> 10 11 o---------------------MMS m-send.req------------------->>> 12 14 <<<-----------------------wtp AC K--------------------------o 13 15 o-----------------------MMS m-send.req----------------->>> 16 18 <<<-------------------MMS m-send.conf-------------------o 17
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter
Appendix A | KPI Values
Value 10801
0 0
Unused Unused
57 CONFIDENTIAL MATERIALS
Field KPIId
Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value 10801
Varchar Varchar
Field
KPIId StartTime EndTime Duration Status Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
10805
Description
Messaging, MMS Send WAP Gateway connect Timestamp of the log message START, which indicates the begin of an MMS Send Test. Timestamp of the log message WSP Connect Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration Status Sum Counter
Value 10900
0 0
Unused Unused
58 CONFIDENTIAL MATERIALS
Field KPIId
Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value 10900
Varchar Varchar
Field
KPIId StartTime EndTime Duration Status Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
11000
Description
PostDialDelay Active State SIP: INVITE 180 RINGING Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration
Value 11010
Field KPIId
Status Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value 11010
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration Status Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
11500
Description
EVDO, PostDialDelay Dormant State EvDO Connection Request 180 RINGING Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime
Value 11600
Duration
Appendix A | KPI Values
Field KPIId
Status Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value 11600
0 0
Varchar Varchar
Field
KPIId StartTime EndTime
Value
11610
Description
DVB-H, Mobile DVB-H Channel Channel request OK: Streaming started - Audio found DVB-H channel added Failed: Channel request failed - Timeout Channel request failed - User abort DVB-H service lost - Coverage lost Reset: Service available - Menu recognized Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
Duration Status Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Value 15100
Field KPIId
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 15100
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
15101
Description
Data (PS), Detach Timestamp of the GMM message Detach Request Timestamp of the GMM message Detach Accept or Timeout whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum
Appendix A | KPI Values
Value 15102
Unused
62 CONFIDENTIAL MATERIALS
Field KPIId
Counter Value1 Value2 Value3 Value4 Value5
Value 15102
0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
15105
Description
Data (PS), Attach (P3) Timestamp of the attach command [AT+CGATT=1] Timestamp of [OK] to attach command received/ (check success with Attach accept) Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1
Value 15200
0 0
Field KPIId
Value2 Value3 Value4 Value5
Value 15200
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
15201
Description
Data (PS), Deactivate PDP Context Timestamp of the SM message Deactivate PDP Context request Timestamp of the SM message Deactivate PDP Context accept or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2
Value 15202
0 0
Field KPIId
Value3 Value4 Value5
Value 15202
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
15203
Description
Data (PS), Deactivate PDP Context Completion Timestamp of the Channel Request on GSM or RRCConnectionRequest on UMTS. Timestamp of the SM message Deactivate PDP Context accept or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4
Value 15205
0 0
Varchar Varchar
Unused Unused
65 CONFIDENTIAL MATERIALS
Field KPIId
Value5
Value 15205
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
15250
Description
Data (PS), IP Service Access Timestamp of the SM message Activate PDP Context request First Packet of the accessed service, this is the EndTime trigger of the following KPIs: 10200, 10201, 10300, 10301, 10400, 10500, 10700 Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Id of the KPI of the end trigger event Name of the end event Unused
Field
KPIId StartTime EndTime
Value
15300
Description
Data (PS), Authentication Timestamp of the GMM message Authentication and ciphering req Timestamp of the GMM message Authentication and ciphering resp or GMM message Authentication and ciphering rej or GMM message Authentication and ciphering failure or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Timeout
Appendix A | KPI Values
0 0
Varchar Varchar
66 CONFIDENTIAL MATERIALS
Security (CS)
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Timeout Varchar Varchar 0 0
Value
15400
Description
CS Ciphering Timestamp of the RR message Ciphering Mode Command Timestamp of the RR message Ciphering Mode Complete or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix Unused Unused Unused Unused Unused Unused Unused
Field
KPIId StartTime EndTime
Value
15500
Description
CS Authentication Timestamp of the MM message Authentication Request Timestamp of the MM message Authentication Response or MM message Authentication Reject or MM message Authentication Failure or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Timeout Varchar Varchar 0 0
Unused Unused Unused Unused Unused Name of the end event Unused
67
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Timeout
Value
15550
Description
CS Identity Timestamp of the MM message Identity request Timestamp of the MM/GMM message Identity response or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Timeout
Value
15560
Description
Call Setup Signalling 2G Timestamp of the RR message Immediate Assignment Timestamp of the RR message Assignment Command Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration
Appendix A | KPI Values
Value 15570
Field KPIId
ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Timeout
Value 15570
0 0
Varchar Varchar
Channels
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Timeout Varchar Varchar 0 0
Value
15600
Description
2G, Traffic Channel Timestamp of the RR message Assignment Command Timestamp of the RR message Assignment Complete or Assignment Failure or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix Unused Unused Unused Unused Unused Name of the end event Unused
Field KPIId
StartTime EndTime
Value 15610
Field KPIId
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 15610
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
15700
Description
2G, Signal Channel Timestamp of Channel Request. Timestamp of Immediate Assignment or Immediate Assignment Reject or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Search Scope: Timeout 9.1.8/3GPP TS 04.18 The two messages are associated via the random number. The only byte (cause and random number) of the channel request must be identical with the 8th byte in the immediate assignment message.
Field KPIId
StartTime
Value 15800
70
Field KPIId
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 15800
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
15900
Description
3G, Security Timestamp of the RRC message SecurityModeCommand Timestamp of the RRC message SecurityModeComplete or SecurityModeFailure or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime
Value 16000
Field KPIId
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 16000
0 0
Varchar Varchar
Field
KPIId StartTime
Value
16050
Description
Signaling Channel Completion Timestamp of the following message : GSM : Channel Request UMTS : RRCConnectionRequest Timestamp of the following message : GSM : Channel Release UMTS : RRCConnectionRelease or RRCConnectionRelease-CCCH Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search Scope: Session Varchar Varchar 0 0
Unused Number of requests for one complete Unused Unused Unused Name of the end event Unused
Coverage
Field KPIId
StartTime EndTime
Appendix A | KPI Values CONFIDENTIAL MATERIALS
Value 16200
Field KPIId
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 16200
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
16310
Description
CDMA , Call Access Traffic Channel Timestamp of the Origination message Timestamp of the Service Connect Completion message. Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Value
Description
Field KPIId
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Session
Value
Description
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 20101
0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Data Services
Field KPIId
StartTime EndTime
Value 20200
Field KPIId
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value 20200
0 0
Varchar Varchar
Name of the half time message Name of the end event Unused
Field
KPIId StartTime EndTime
Value
20201
Description
Data, Email Receive Halftime between the POP message Request retrieve and Response: any number octets which indicates the begin of the message reception Timestamp of the TCP last Continuation before message 110 [FIN;ACK] which indicates the last packed sent for the current TCP connection for POP3 (Port 110) Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the half time message Name of the end event Unused
Field KPIId
StartTime EndTime
Value 20203
Duration
Appendix A | KPI Values
Field KPIId
ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value 20203
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
20205
Description
Data, Email Send Timestamp of the SMTP command Message Body which indicates the begin of the message transmission Timestamp of the Response: Message accepted which indicates the upload is done. Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime
Value 20206
Duration ErrorCode
Appendix A | KPI Values
Field KPIId
Sum Counter Value1 Value2 Value3 Value4 Value5
Value 20206
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
20211
Description
Data, IMAP Email Receive Header Timestamp of the FETCH 1 IMAP4 message (RFC822.HEADER) Timestamp of the Response: Cx OK FETCH completed IMAP4 message where x must match the id from Request Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
77
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value 20300
0 0
Varchar Varchar
Name of the half time message Name of the end event Unused
Field
KPIId StartTime EndTime
Value
20301
Description
Data, FTP Downlink Timestamp of the Response opening message plus the halftime between Response opening and the first FTP Data Timestamp of the last FTP Data message that coincides with a TCP message a port Number [FIN;ACK] and is before >21[FIN;ACK] which indicates the that the connection was successfully concluded Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the half time message Name of the end event Unused
78
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 20305
0 0
Varchar Varchar
Field KPIId
StartTime
Value 20306
79
Field KPIId
EndTime
Value 20306
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Unused Name of the end event Unused
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
20307
Description
Data, FTP Uplink (B) Timestamp of the reception of [ACK] from the [SYN;ACK] Timestamp of the message [FIN;ACK] for the last FTP DATA Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime
Value 20308
Duration ErrorCode
Appendix A | KPI Values
Field KPIId
Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value 20308
0 0
Varchar Varchar
Field KPIId
StartTime
Value 20400
EndTime
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the half time message Name of the end event URL
Field KPIId
StartTime
Value 20401
81
Field KPIId
EndTime
Value 20401
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the half time message Name of the end event URL
Field
KPIId StartTime EndTime
Value
20402
Description
Data, HTTP Transfer Put Timestamp of the PUT message sent to the server Timestamp of the last message sent: First [FIN;ACK] after last Continuation - HT QP: Last packet sent Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Unused Name of the end event URL
82
Field KPIId
StartTime EndTime
Value 20405
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Unused Name of the end event URL
Field
KPIId StartTime EndTime
Value
20407
Description
Data, HTTP Browser (B) Timestamp of the first GET command Timestamp of the last Continuation message of the connection or the HTTP/1.1 % OK message if no continuation is present. (The download is successful if the test as such is marked as successful by the browser) Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Unused Name of the end event URL
Field KPIId
StartTime
Value 20500
Field KPIId
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 20500
0 0
Varchar Varchar
Field KPIId
StartTime EndTime
Value 20600
0 0
Varchar
Field KPIId
Value4 Value5 Search scope: Test
Value 20600
Varchar
Field
KPIId StartTime
Value
20601
Description
Data, Video Streaming Cut off According to the used protocol the timestamp of the RTSP: PLAY (Etheral) or RTSP Play (VideoTrace) (taken from Video Status Trace) According to the used protocol the timestamp of the last HTTP: RTSP: RTSP TEARDOWN / PAUSE HTTP: TCP [RST] or [FIN; ACK] TCP: RTSP TEARDOWN / PAUSE QP: QP TEARDOWN Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Field KPIId
StartTime
Value 20700
Unused Unused
85 CONFIDENTIAL MATERIALS
Field KPIId
Value1 Value2 Value3 Value4 Value5
Value 20700
Varchar Varchar
Name of the half time message Name of the end event Unused
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3
Appendix A | KPI Values
Value 21000
0 0
Varchar
Field KPIId
Value4 Value5 Search scope: Test
Value 21000
Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
21010
Description
Data, SIP Call Completion Timestamp of the SIP 200 Okmessage Timestamp of the SIP Request:BYE message Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime
Value 21600
Field KPIId
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value 21600
0 0
Varchar Varchar
Messages
For the detailed mapping between the events in the log and the trigger points in the application see Data and Video Test Scenario Manual section MMS send and MMS receive.
Field
KPIId StartTime EndTime
Value
20800
Description
Messaging, MMS Send Timestamp of the log message START, which indicates the begin of an MMS Send Test. Timestamp of the log message TRANSMISSION FINISHED or TRANSMISSION TIMEOUT, which indicates the end of an MMS transmission Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
88
Field
KPIId StartTime EndTime
Value
20801
Description
Messaging, MMS Receive Timestamp of the log message NOTIFICATION RECEIVED, which indicates the time of the reception of the notification. Timestamp of the log message TRANSMISSION FINISHED or TRANSMISSION TIMEOUT, which indicates the end of an MMS download Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 20900
0 0
Varchar Varchar
Data Call
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Session Varchar Varchar 0 0
Value
25100
Description
Data (PS), Attach Timestamp of the GMM message Attach Accept Timestamp of the GMM message Detach Request Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix Unused Unused Unused Unused Unused Unused Unused
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Session
Appendix A | KPI Values
Value 25200
0 0
Varchar Varchar
90 CONFIDENTIAL MATERIALS
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
25201
Description
Data (PS), PDP Context Timestamp of the SM message Activate PDP Context accept or message Timestamp of the SM message Deactivate PDP Context accept Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Resource
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Session Varchar Varchar 0 0
Value
25300
Description
2G, Resource Timestamp of the RR message Assignment Complete Timestamp of the RR message Channel Release Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix Unused Unused Unused Unused Unused Name of the end event Unused
Field KPIId
StartTime EndTime Duration
Value 25400
Field KPIId
ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 25400
0 0
Varchar Varchar
Field KPIId
StartTime
Value 26100
EndTime
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Session Varchar Varchar 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
92
Value
30101
Description
Telephony, Call Exit CC: Disconnect CC: Release Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix Unused Unused Unused Unused Unused Unused Unused
Data
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar
Value
30200
Description
Data, Email Send (TCP Throughput) See KPIID 20200 See KPIID 20200 Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix Unused Unused Throughput [Bytes/sec] Unused Size of email Unused Unused
93
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 30201
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30203
Description
Data, IMAP Email Receive (TCP Throughput) See KPIID 20203 See KPIID 20203 Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix Unused Unused Throughput [Bytes/sec] Unused
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode
Value 30205
Field KPIId
Sum Counter Value1 Value2 Value3 Value4 Value5
Value 30205
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30206
Description
Data, Email Receive (TCP Throughput) See KPIId 20206 See KPIId 20206 Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2
Value 30300
0 0
Field KPIId
Value3 Value4 Value5
Value 30300
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30301
Description
Data, FTP Downlink (TCP Throughput) See KPIId 20301 See KPIId 20301 Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 30305
0 0
Varchar Varchar
96
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30306
Description
Data, FTP Downlink (TCP Throughput) See KPIId 20306 See KPIId 20306 Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30307
Description
Data, FTP Uplink (B) (TCP Throughput) See KPIId 20307 See KPIId 20307 Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum
Value 30308
Unused
97 CONFIDENTIAL MATERIALS
Field KPIId
Counter Value1 Value2 Value3 Value4 Value5
Value 30308
0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30400
Description
Data, HTTP Browser (TCP Throughput) See KPIId 20400 See KPIId 20400 Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3
Value 30401
0 0
Varchar
Size of file
98 CONFIDENTIAL MATERIALS
Field KPIId
Value4 Value5
Value 30401
Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30402
Description
Data, HTTP Transfer Put (TCP Throughput) See KPIId 20402 See KPIId 20402 Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 30405
0 0
Varchar Varchar
99
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30407
Description
Data, HTTP Browser (B) (TCP Throughput) See KPIId 20407 See KPIId 20407 Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30500
Description
Data, UDP DL See KPIId 20500 See KPIId 20500 Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum
Value 30600
Unused
100 CONFIDENTIAL MATERIALS
Field KPIId
Counter Value1 Value2 Value3 Value4 Value5
Value 30600
0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30605
Description
Data, Video First Frame Delay 554 [SYN] According to the used player the timestamp of Quicktime: Displaying or Real: Playing Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime
Value 30606
101
Field KPIId
EndTime
Value 30606
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30607
Description
Data, Video Streaming Streaming Session Time 554[SYN] Resized or Buffering or Loading or Recording Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
102
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 30700
0 0
Varchar Varchar
Messages
The following Messages KPIs are not implemented as explicit KPIs but calculated on the respective tab sheet and report. For the detailed mapping between the events in the log and the trigger points in the application see Data and Video Test Scenario Manual section MMS send and MMS receive.
Field
KPIId StartTime EndTime
Value
30800
Description
Messaging, MMS E2E Timestamp of the log message START on the MO side, which indicates the begin of an MMS Send Test. Timestamp of the log message TRANSMISSION FINISHED or TRANSMISSION TIMEOUT on the MT side, which indicates the end of an MMS transmission Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test Varchar Varchar 0 0
Unused Unused Unused Unused Name of the start event Name of the end event Unused
103
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30801
Description
Messaging, MMS Notification Timestamp of the log message on the MO side TRANSMISSION FINISHED which indicates the end of an MMS upload Timestamp of the log message on the MT side NOTIFICATION RECEIVED, which indicates the time of the reception of the notification. Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30803
Description
Messaging, MMS Sent Time Timestamp of the log message on the MO side TRANSMISSION STARTED which indicates the start of an MMS upload Timestamp of the log message on the MO side TRANSMISSION FINISHED which indicates the end of an MMS upload Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime
Value 30804
Field KPIId
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 30804
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
30900
Description
Messaging, SMS E2E Timestamp of the log message START, which indicates the begin of an SMS test Timestamp of the log message SMS RECEIVED, which indicates t he end of an SMS transmission Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
105
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
31000
Description
Data, TCP Roundtrip [SYN] [SYN;ACK] Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
31010
Description
Data, SIP Call Completion Timestamp of SIP - Request: REGISTER Timestamp SIP 200 OK Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime
Value 31100
Field KPIId
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 31100
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value
31610
Description
DVB-H, Mobile DVB-H Soft Cut off SQ < x SQ > x Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum
Appendix A | KPI Values
Value 31620
Unused
107 CONFIDENTIAL MATERIALS
Field KPIId
Counter Value1 Value2 Value3 Value4 Value5 Search scope: Test
Value 31620
0
Varchar Varchar
Handover
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Timeout Varchar Varchar 0 0
Value
34050
Description
2G, Handover Timestamp of the message Handover Command Timestamp of the message Handover Complete or HandoverFailure or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix Unused Unused Unused Unused Unused Name of the end event Unused
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter
Value 34060
0 0
Unused Unused
108 CONFIDENTIAL MATERIALS
Field KPIId
Value1 Value2 Value3 Value4 Value5
Value 34060
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
34070
Description
2G, Intra Cell Handover Assignment Command (Only when 25300 is active) Assignment Complete Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime
Value 35010
0 0
Unused Unused
109 CONFIDENTIAL MATERIALS
Field KPIId
Value1 Value2 Value3 Value4 Value5 Search scope: Session
Value 35010
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Timeout
Value
35020
Description
InterSystemHO, GSM->UMTS Timestamp of the CC message Inter System to UTRAN Handover Command Timestamp of the log message HandoverToUTRANComplete or Handover Failure or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1
Value 35030
0 0
Field KPIId
Value2 Value3 Value4 Value5
Value 35030
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
35040
Description
InterSystemHO, UMTS->GSM during Transfer Timestamp of the message CellChangeOrderFromUTRAN Timestamp of the first GSM SystemInformation message after CellChange Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 35041
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
35060
Description
InterSystemHO, GSM->UMTS (Idle reselect) Timestamp of the last GSM RR message Timestamp of the first UMTS RRC message or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
35070
Description
InterSystemHO, UMTS->GSM (Idle reselect) Timestamp of the last UMTS RRC message Timestamp of the first GSM RR message or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime Duration
Value 35080
Field KPIId
ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 35080
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
35100
Description
3G, Handover Timestamp of the RRC message ActiveSetUpdate Timestamp of the message ActiveSetUpdateComplete or ActiveSetUpdateFailure or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
113
Update type:
Addition: AdditionInformationList = 1 and RemovalInformationList = 0 Removal: AdditionInformationList = 0 and RemovalInformationList = 1 Replace: AdditionInformationList = 1 and RemovalInformationList = 1
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
35101
Description
3G, Cell Update CellUpdate CellUpdateConfirm or CellUpdateConfirm-CCCH Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime
Value 35105
114
Field KPIId
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 35105
0 0
Varchar Varchar
Field
KPIId StartTime
Value
35106
Description
3G, Inter Frequency Handover Timestamp of the RRC message indicating frequency change PhysicalChannelReconfiguration TransportChannelReconfiguration RadioBearerReconfiguration RadioBearerSetup: if UARFCN is different than current UARFCN Timestamp indicating successful frequency change PhysicalChannelReconfigurationComplete RadioBearerReconfigurationComplete TransportChannelReconfigurationComplete RadioBearerSetupComplete Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Varchar Varchar 0 0
115
Field
KPIId StartTime
Value
35110
Description
3G, HSPA Cell Change Timestamp of message indicating cell change PhysicalChannelReconfiguration RadioBearerReconfiguration TransportChannelReconfiguration only when at least one servingHSDSCH_RL_indicator true Timestamp of message indicating successful cell change PhysicalChannelReconfigurationComplete RadioBearerReconfigurationComplete TransportChannelReconfigurationComplete Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
EndTime
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Timeout Varchar Varchar 0 0
Field KPIId
StartTime
Value 35111
EndTime
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Varchar Varchar 0 0
Field KPIId
Value5
Value 35111
Resource
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5 Search scope: Timeout Varchar Varchar 0 0
Value
33200
Description
Data, PDP Context Exit Timestamp of the message Deactivate PDP context Request Timestamp of the UMTS message RRCConnectionReleaseComplete Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix Unused Unused Unused Unused Unused Unused Unused
Mobility
Field KPIId
StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Appendix A | KPI Values CONFIDENTIAL MATERIALS
Value 34000
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
34004
Description
2G/3G, Routing Area Update Access GSM: Channel Request UMTS:RRCConnectionRequest Timestamp of the message Routing area update accept or Routing area update reject or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
34010
Description
2G/3G, TMSI Reallocation TMSI Reallocation Command TMSI Reallocation Complete Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime
Value 35003
Field KPIId
EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 35003
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
35004
Description
2G/3G, Location Update Access GSM: Channel Request UMTS:RRCConnectionRequest Timestamp of the message Location Updating Accept or Location Updating Reject or Timeout or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Field KPIId
StartTime EndTime
Value 35101
Field KPIId
Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value 35101
0 0
Varchar Varchar
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
35300
Description
3G, URA Update Timestamp of the RRC message URAUpdate Timestamp of the message URAUpdateConfirm -CCCH or URAUpdateConfirm or Timeout, whatever comes first Time in ms between StartTime and EndTime 0 = OK, see Status in the appendix
0 0
Varchar Varchar
Resource
Field KPIId
StartTime EndTime Duration ErrorCode
Appendix A | KPI Values CONFIDENTIAL MATERIALS
Value 35200
Field KPIId
Sum Counter Value1 Value2 Value3 Value4 Value5
Value 35200
0 0
Varchar Varchar
WCDMA
This KPI is not implemented in the current version
Field
KPIId StartTime EndTime Duration ErrorCode Sum Counter Value1 Value2 Value3 Value4 Value5
Value
32000
Description
WCDMA, BestServer Timestamp of the UPMM Scanner message Unused unused unused
0 0
Varchar Varchar
Status
The result of the KPI measurements can to be found in the ErrorCode field of the record. The status is OK or successful whenever the service or a resource is obtained as expected. Otherwise, if that is not the case e.g. a PDP context request rejected then the status field will show 108001. Also, if there is e.g. a ActiveSetUpdateFailure sent then the status field is set to 108002. Some end trigger points are expected to come within a limited time (this is a time based trigger). If that time is exceeded and no end trigger point is detected then the status field is set to 108003. In the reports, the last three cases described above are all marked as Failed since the process was not s uccessfully concluded. If a KPI measurement is based on session or test and one of the trigger point is missing then the status field is set to 108004 or 108005 depending on what is missing the Status field in the report will show Incomplete. (With the Qualcomm trace phone the rate of missing layer 3 messages is particularly high at this time so that whenever a message is missing for a complete procedure the status is set to 108100, 108101, 108102 or
Appendix A | KPI Values CONFIDENTIAL MATERIALS 121
108103 to mark that as a special event. The different types are listed in the table below).
Table A-2 Error Codes and Status field
Code
0 108001 108002 108003 108004 108005 108100 108101 108102 108103
Message
OK Rejected Failure TimeOut StartTime missing (at Session/Test end) End Time missing (at Session/Test end) End Trigger OK and Start trigger point missing (only for Qualcomm) End Trigger Reject and start trigger point missing (only for Qualcomm) End Trigger Failed and start trigger point missing (only for Qualcomm) Start trigger point present but end trigger point missing (only for Qualcomm)
Status
Successful Failed Failed Failed Successful Failed Successful Failed Failed Unknown (End Trigger Missing)
122
KPI Calculation
The presentation as described in this appendix is the fashion the KPIs are calculated and presented in the reports generated with the Report Generator. For details see NQDI Manual
Success Rate
The success rate is in general the number of successful attempts divided by the total number of attempts expressed in percent: SuccessRate = # successful attempts/ total # of attempts * 100%
Table B-1 Table for rates and averages
This rule is applied throughout with the exception of RRC Connection Request where sometimes a second request occurs although the first is successful. In such a case the success rate calculated as if there is only one attempt.
Rejection Rate
The rejection rate is only required for the PDP context activation where it is defined as the number of rejected attempts divided by the total number of attempts expressed in percent. RejectionRate = # rejected attempts/ total # of attempts * 100%
Time
The time that is given for the individual processes is the time elapsed between two trigger points given in Section 2 and 3. With the exception of retainability durations with time in seconds (s) the time is given in milliseconds (ms).
PDF
The probability density diagram is a histogram where the frequency of occurrence of the values in the given intervals is shown.
123
The desired values that are to be shown in such a fashion are given in the Section 2. While the range for time can vary between 2000ms and 20 minutes it is divided up into fifty intervals. For the Ec/Io (0-32 dB) and RSCP (-30 - -110 dBm) as well as for UE Tx Power (-30 - -110 dBm) and BLER (0 100 %) the range is different and the number of intervals is chosen appropriately.
CDF
The cumulative density function is a histogram where the percentages of the measured values that are equal or bigger than the respective value point on the x axis is shown.
The desired values that are to be shown in such a fashion are given in the Section 2. While the range for time can vary between 2000ms and 20 minutes it is divided up into fifty intervals. For the Ec/Io (0-32 dB) and RSCP (-30 - -120 dBm) as well as for UE Tx Power (-30 - -110 dBm) and BLER (0 100 %) the range is different and the number of intervals is chosen appropriately.
References
125