Académique Documents
Professionnel Documents
Culture Documents
VISOCALL PLUS
Foreword
Foreword
Schrack Seconet AG has been known as an innovative company since it was founded. In all our product divisions we offer solutions that are in line with market requirements, which are highly valued by our customers and partners far beyond our national boundaries. We constantly attempt to address the constantly and rapidly growing demands of the market with our products. We therefore offer you, as a company specialising in security systems, a wide range of different systems and devices, especially with regard to communications systems. All product families are closed and autonomously functioning systems, which are also able to communicate with one another by means of the available systems interfaces. Furthermore, we are also able to rapidly and reliably connect to foreign systems, if particular requirements stipulate this. Schrack Seconet AG is a guarantee for security and quality! You can rely on us to also rise to challenges in the future too, so that current and future systems and platforms can also be offered in line with market requirements and offering user friendliness. Schrack Seconet AG wishes you every success.
FC38502E-A
VISOCALL PLUS
Table of Contents
Table of Contents
Table of Contents Page
Datasheets ............................................................................ 22
1 2 3 4 5 6 7 8 9 Connection Devices .......................................................................................................22 Patient handsets and Accessories ...................................................................................25 Call and cancel button combinations .............................................................................29 Signal lamps .................................................................................................................32 Room terminals .............................................................................................................35 Mini terminal.................................................................................................................37 Bus interface .................................................................................................................39 Miscellaneous................................................................................................................41 Text terminal .................................................................................................................44
10 Ward Terminal ..............................................................................................................46 11 Control panel/Ward control panel .................................................................................48 12 Interfaces ......................................................................................................................51 13 TV devices and accessories ............................................................................................53 14 Power supplies ..............................................................................................................62 15 Installation accessories ..................................................................................................66
FC38502E-A
VISOCALL PLUS
Table of Contents
Datasheets ............................................................................ 84
1 2 3 4 5 6 Hardware......................................................................................................................84 Software Modules..........................................................................................................87 Hardware Cash Register ................................................................................................90 Software Cash Register ..................................................................................................93 TV Interfaces .................................................................................................................94 Accessories....................................................................................................................97
FC38502E-A
VISOCALL PLUS
VISOCALL PLUS
FC38502E-A
VISOCALL PLUS
General
General
Internal messaging systems are an absolute necessity in hospitals. Everyday life in the hospital is marked by staff stress and time pressure. Nonetheless, every patient wants to see the best possible conditions for his care. Hence, the great importance of having optimal access to information throughout the entire hospital. Nurse call systems assist in this task. They enable rapid contact between patients and nursing staff, as well as between nursing-staff members. Every patient is able to reach "his" nurse, and every nursing-staff member can call additional staff members and the doctor. Light signals in the place from where the call has originated and voice circuit connections ensure optimal communications. However, every hospital is an individual entity. Various criteria for evaluation must also be observed, such as the fact that demands, opinions and necessities can change. VISOCALL PLUS offers optimal solutions for this problematic area: State of the art technology allows a standard installation for every forms of patient care. Room terminals and patient handsets with autarchic single chip processors render controlling processes from above superfluous, simultaneously acting as switchboards for data and docking with other intelligent units. Multiplex sound-control as well as new hardware and software components offer further advantages as well as allowing the integration of additional systems. Monitor systems with colour graphical displays with automatic sector overlays with their many buttons and lamps make it possible to dispense with voluminous switchboard queries.
FC38502E-A
VISOCALL PLUS
SystemDescription
SystemDescription
1 Characteristic System Properties
1.1 Standards
VISOCALL PLUS complies with the current standards and regulations: DIN-VDE 0834 - Call systems in hospitals, care homes and similar establishments, valid from 1 April 2000 DIN-VDE 0834 / Part 1 - Device specifications, installation and operation, valid from 1 April 2000 DIN-VDE 0834 / Part 2 - Environmental conditions and electromagnetic compatibility, valid from 1 April 2000 Provision of electricity in accordance with EN60950, EN61000-4-2 to -4-6 as well as EN61000-3-2 and EN55011 (Class B)
as well as all standards and regulations referred to in these standards. All VISOCALL PLUS system components conform to environmental class I, whilst all components which are installed in sanitary units, bathrooms etc. conform to environmental class II. In accordance with VDE0834 part 2 this means: Environmental class I: +5C to +40C *) with an relative air humidity of up to a maximum of 85% Environmental class II: +5C to +40C with an relative air humidity of up to a maximum of 95% *) +55C when installed in medical supply units When planning and constructing nurse call systems the currently applicable regional regulations must also be observed from the installation to the operation of call systems in hospitals, old peoples homes and similar establishments. Many of the VISOCALL PLUS systems properties considerably exceed these requirements.
FC38502E-A
VISOCALL PLUS
SystemDescription
VISOCALL PLUS Power supplies For supplying power to the ward or a particular sector (24V=). Accessories Switchboxes and cases, soffit lamps, special system cabling etc.
SystemDescription
It is possible to change from one type of system to another at any time. The room terminals allow the formation of Communication Islands For bathrooms and treatment wards with an self-contained functional flow within every type of system.
VISOCALL PLUS is the symbiosis of the complex requirements placed on future looking communications systems in the healthcare sector, the highest level of security and optimal operating comfort. All these features are bundled together with state-of-the-art technology and a cutting edge design.
FC38502E-A
VISOCALL PLUS
SystemDescription
VISOCALL PLUS makes it possible to implement any type of system in accordance with DIN 41050 Part 1 whilst additionally offering practice-specific customisability. Global measures can also be implemented for decentralised systems (using possible extensions). There are no limitations to the number of possibilities for extending VISOCALL PLUS functions and configurations. All important system devices contain single chip processors with comprehensive software, which permits the required function. Any system configuration is possible, based upon a standard installation of the system, by simply connecting room terminals, ward terminals and control panels. If all types of connector are present, then it is possible to use or remove any type of device at any time. Devices automatically recognise the current status of the system.
10
FC38502E-A
VISOCALL PLUS
SystemDescription
11
FC38502E-A
VISOCALL PLUS
SystemDescription
VISOCALL PLUS doesnt require superordinated controls neither for functions, nor for speech circuits or system configuration. All system functions are stored, ready-for-use, in the microcomputers of the autarchic room terminals and query locations. Each room terminal recognises the attached system components (e.g. patient handsets, call buttons, signal lamps etc.) by means of programming and signals all activities within the area. Every ward terminal or every control panel automatically recognises the accompanying room terminals and ward terminals and displays the functions for the entire area. System devices communicate with one another via the bus circuits, whilst making the relevant decisions about functions autarchically. Every important function (doctor call, diagnostic call, emergency call etc.) can be monitored via the system interface and can be transferred to other systems or communications processes.
The following functions are as standard. Additional property-specific customisations can be carried out using the systems software structure. Light signals, call signs and signalling intervals etc. are in accordance with DIN and VDE requirements. In the explanation of functions and system parts, the terms mentioned therein are also observed.
Calls and reminders are also cancelled, by pressing the presence buttons, and emergency calls, doctor calls, calls forwarded and secondary queries initiated by the same process.
12
FC38502E-A
VISOCALL PLUS
SystemDescription
3.9 The Bathroom of WC Emergency Call from the rooms sanitary unit or from a separate sanitary unit
This call is made from the separate sanitary unit (toilet, toilet block or ward bathroom) by the nurse whose presence has been marked. This call can not be queried and is first incorporated in version 2.1 of the software.
13
FC38502E-A
VISOCALL PLUS
SystemDescription
VISOCALL PLUS
SystemDescription
Room terminals with presence marked are automatically activated in decentralised systems for call diversion and secondary queries. As a result the nurse can be reached in every important room in the ward, and is therefore informed of existing calls. Linking to the network happens according to the priority hierarchy, and each call is immediately recognised as being queryable or non-queryable. Queryable Queryable calls: When a queryable call is accepted, a speech connection to the person making the call is made. After the conversation has been ended, each call can be remotely cancelled or be replaced by a reminder. Non Queryable calls: They can be recognised as such straightaway and can only be acknowledged from the location where the call was triggered. Appearance on the display: The type of call and location of the call is displayed as text on room terminals with a display. Additional calls made during the conversation are signalled by a changing display. Note about points 3.17 and 3.18: Queryable calls can naturally also be reacted to directly (without the prior conversation process) as non-queryable calls, and can be acknowledged in the room the call came from by pressing the corresponding presence key on the room terminal (or the separate cancel button of e.g. the sanitary unit).
3.19 Reminders
The purpose of a reminder is to indicate (mark, identify) rooms, which are to be visited by a member of the nursing staff as a follow-up to a call. A reminder is generally activated by nursing staff themselves, if there is no reply from the person making the call when querying a call, or if there is no speech connection for a call, or if there is an engaged tone, or if other calls are to be queried before going to the location of the call or if calls are delegated to other nursing staff members. Calls with reminders can be repeated and queried several times. It is possible to activate up to three reminders either at room terminals and at the ward terminal or at the control panel - for Nurses Helper nurses Doctors green yellow orange
15
FC38502E-A
VISOCALL PLUS
SystemDescription
since doctors generally have different duty areas. Ward terminals and room terminals with a display also display the ward number when the call is sent.
3.25 Centralisation
Centralisation blocks call forwarding and the ability to query the call at room terminals across the whole ward. All calls from the ward are only displayed at the ward terminal and can only be queried from here. Centralisation is said to have occurred, if, for example, all calls are queried by a nurse at the ward terminal, although calls will be delegated to only nursing staff in the ward for being dealt with. Such a system is as a rule however only usual in CENTRALISED SYSTEMS.
16
FC38502E-A
VISOCALL PLUS
SystemDescription
17
FC38502E-A
VISOCALL PLUS
SystemDescription
18
FC38502E-A
VISOCALL PLUS
SystemDescription
System devices
Using the aforementioned system devices it is possible, in practice, to create any type of system imaginable. Functions are automatically adapted using the devices in-built software. The system devices correspond to the relevant VDE and DIN standards. The devices use screw clips, screw-free clips or ribbon cable connectors for the wiring connections. Every system device contains all the components and software modules which are required for all possible system-related uses; an initial supply of LEDs is also included. Boxes for counter-sinking, materials for use in the installation process, light bulbs, cabling etc. are all listed separately in section 11. Accessories and should be acquired separately. Switchboxes and double switchboxes for use in installation in cavity walls and concealed installation are as standard (as described in section 14 Accessories) and can also be obtained elsewhere. The same is also true for the various wiring materials. Some system devices are delivered as individual pieces for economic reasons and installation purposes. These parts for shipping are listed alongside the relevant devices, including their order numbers. Precise advice and recommendations for the selection, planning and configuration of system devices in the various types of room within a hospital can be found in the chapters Planning and Installation and Placement of devices which feature many diagrams and examples.
The standard programming of room terminals and the ward terminals are designed to display consecutive room and ward numbers (i.e. 01-... in an unbroken sequence). For its part the ward terminal also displays, in addition to the normal information, other further detailed information about individual wards and the various interconnections of wards. These devices can also optionally be supplied with a project-specific software package to display the actual (individual) layout.
The following options are possible: Making telephone calls Controlling the rooms television and receiving TV sound Operating the patients television and receiving TV sound Pre- and post-paid outgoing telephone calls
Staff members use the same device if they require assistance. Each device contains a single chip processor running ist own software to enable fully autarchic intelligence from each bead, as well as a multiplex sound connection to the relevant room terminal.
19
FC38502E-A
VISOCALL PLUS
SystemDescription
Each room terminal contains its own computer system with multifunctional software and many new advantages - e.g.: designed for 6 beds with speech communication Room sanitary units beds without a speech connection, multiplex sound transfer to patient handsets, Membrane keypad, display for plain text display and LEDs that are not subject to wear and tear etc. Integrated TV controller for two room TVs (Loewe)
Password-protected programmer level and selection by room of group care and selection by bed of enhanced bed calls.
20
FC38502E-A
VISOCALL PLUS
SystemDescription
21
FC38502E-A
VISOCALL PLUS
Datasheets
Datasheets
1 Connection Devices
For connecting patient handsets, for concealed installation or through service ducts; in the latter case for installation and wiring by the manufacturer of the service ducts.
One 15 pin connection socket (SUB-D) for connecting the patient handset or push button One connection socket (4 pin) for diagnostic calls, One 3 pole plug contact for headphones, with automatic sound switching when the listener plugs the headphones in. Connection for controlling a power supply relay Connector blocks for connecting the TV sound signal One connection panel with screw-free clips; incl. covering panel 160x83x13mm (HxWxD) in colour RAL 9010
Dimensions:
Type: SV
Type: SVSV-B
22
FC38502E-A
VISOCALL PLUS
Datasheets
One 15 pin connection socket (SUB-D) for the patient handset or push button One connection socket (4 pin) for diagnostic calls, One 3 pole plug contact for headphones, with automatic sound switching when the listener plugs the headphones in. Telephone module incl. in the connection device in the form of a extn. board Connection for controlling a power supply relay Connector blocks for connecting the TV sound signal One connection panel with screw-free clips; incl. covering panel 160x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008300
One 15 pin connection socket (SUB-D) for the patient handset or push button One connection socket (4 pin) for diagnostic calls, One 3 pole plug contact for headphones, with automatic sound switching when the listener plugs the headphones in. Telephone module incl. in the connection device in the form of a extn. board Connection for controlling a power supply relay Two connector blocks for connecting the TV sound signal One 40 pole connector base for ribbon cable connectors; Two 4 pole connector bases (for connection to a power supply relay) Circuit board for the (screw-free) snap-in attachment in the relevant prepared service ducts. Order number: FC008301
Type: SVTSVT-B
23
FC38502E-A
VISOCALL PLUS
Datasheets
To be installed in a double switchbox, to connect patient handsets PBG/PBG-T or push button BT-R/BT-RL, only for triggering calls and switching of 2 power supply relays, consisting of a supporting frame with a circuit board, which contains the necessary electronic components for call surveillance etc. as well as
One 15 pin connection socket (SUB-D) for the patient handset or push button One connection socket (4 pin) for diagnostic calls, One call button with a control LED, finder light included One connection panel with screw-free clips; incl. covering panel 160x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008310
24
FC38502E-A
VISOCALL PLUS
Datasheets
Patient handsets (in the form of handheld devices or for mounting into bedside cabinets) are the patients communications devices. Anyone can reach the nurse via his console and use additional convenient features.
Type: PBG
Type: PBGPBG-T
25
FC38502E-A
VISOCALL PLUS
Datasheets
Type: PBGPBG-TV
Type: PBGPBG-TVL
26
FC38502E-A
VISOCALL PLUS
Datasheets
1 call button (red, marked with a nurse symbol) with 2 control LEDs, finder light included. 6.3mm jack plug for connection to unit SVM-K Includes a 2.8m connection cable 90x60x20mm (HxWxD) plastic casing in colour RAL 9010
Dimensions:
Type: BTBT-RK
VISOCALL PLUS
Datasheets
Type: HL VCP
2.10 Headphones
For receiving radio and TV sound, with a 2.0m connecting cord, and a 3 pole 3.5mm diameter jack plug, for connection to connection devices and headphones connection socket.
Type: KH
2.11 Cradle
To hold patient handsets from the PBG and BT series, made of plastic in colour RAL 9010, with mounting holes.
Type: HK PBG/BT
28
FC38502E-A
VISOCALL PLUS
Datasheets
For installation in sanitary units and day rooms, for making or cancelling calls. The Telephone signalling device also indicates outstanding telephone calls from e.g. the wards nurses room.
1 call button (red, marked with a nurse symbol) on a membrane keypad with 2 control LEDs, finder light included 1 connection panel with screw-free clips; incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008400
Dimensions: Type: RT
Membrane with a control LED, finder light included 1 connection panel with screw-free clips; including 2m cord with grip incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008410
Dimensions: Type: ZT
Membrane with a control LED, finder light included 1 connection panel with screw-free clips; incl. 2 m pneumatic tubing with a pressure ball incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008420
Dimensions: Type: PT
1 cancel button (green) on a membrane keypad with a control LED, 1 connection panel with screw-free clips; incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008430
FC38502E-A
Dimensions: Type: AT
29
VISOCALL PLUS
Datasheets
1 call button (red, marked with a nurse symbol) on a membrane keypad with a control LED, finder light included 1 cancel button (green) on a membrane keypad with a control LED, 1 connection panel with screw-free clips; incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008450
1 call button (orange, marked with a doctor symbol) on a membrane keypad with control LED, finder light included 1 connection panel with screw-free clips; incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008470
1 presence button (green, marked with a nurse symbol) on a membrane keypad with control LED 1 presence button (yellow, marked with a nurse symbol) on a membrane keypad with control LED 1 connection panel with screw-free clips; incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010 Order number: number: FC008460
1 connector for contact for push button type BT-RK 1 call button (red, nurse symbol) on a membrane keypad with control LED, finder light included 1 connection panel with screw-free clips; incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008320
FC38502E-A
VISOCALL PLUS
Datasheets
1 call button (red) on a membrane keypad to trigger calls with a control LED. 1 function key (green) to activate the noise monitor 15 pin SUB-D connector plug for connection with all connection devices with a SUB-D connector. Includes a 2m connection cable 50x110mm (H x Diameter) in colour RAL 9010 Order number: FC008480
Dimensions:
Type: SW
31
FC38502E-A
VISOCALL PLUS
Datasheets
Signal lamps
For the widest possible range of uses the VISOCALL PLUS system offers various signal lamps. Both soffit lamps and LED signal lamps are used as room signal lamps and as direction signal lamps.
Circuit board with 5 LED panels 5 translucent plastic segments 2 grey plastic cabs at the top and at the bottom 86x86x52mm (HxWxD) pyramid shaped rd rd/gn wh/rd/gn rd/gn/or wh/rd/gn/or wh/rd/gn/ye/or Order number: FD8061 FD806101 6101 Order number: FD8062 FD80620 6201 Order number: FD8063 FD806301 6301 Order number: FD8063 FD806302 6302 Order number: FD8064 FD80640 6401 Order number: FD8065 FD806501 6501
Dimensions:
Type: ORION 1S Type: ORION 2A Type: ORION 3A Type: ORION 3B Type: ORION 4A Type: ORION 5
Type: LV1
Type: LV2
32
FC38502E-A
VISOCALL PLUS
Datasheets
Type: LV3
Type: LD1
Type: LD2
Type: LD3
33
FC38502E-A
VISOCALL PLUS
Datasheets
For n*) wards, consisting of a base frame (colour RAL 1013) for surface installation with n*) signal lamps of type LD1 each with 2 holders (including clips) for 2 soffit lamps as well as 1 dividing wall Type: Rn*)xLD2 Order number: YY20852n*)
For n*) wards, consisting of a base frame (colour RAL 1013) for surface installation with n*) signal lamps of type LD3 each with 3 holders (including clips) for 3 soffit lamps as well as 2 dividing walls Type: Rn*)xLD3 Order number: YY20853n*)
Type and Order numbers: Instead of n, the number of wards that can be combined into one area is to be used; e.g.; Group signal lamps for 4 wards, consisting of a base frame (colour RAL 1013) for surface installation with 4 signal lamps of type LD3 each with 3 holders (including clips) for 3 soffit lamps as well as 2 dividing walls Type: R4xLD3 Dimensions: L=(n*) x 86) + 24mm, W = 103 mm, H = 90 mm Order number: YY208534
Type: Gd5Gd5-9 Type: Gd5Gd5-2 Type: Gd5Gd5-3 Type: Gd5Gd5-6 Type: Gd5Gd5-7
34
wh rd gn ge or
Order number: FL73309FL73309Order number: FL73310 FL7331010Order number: FL73311FL73311OrderOrder-number: FL73321FL73321OrderOrder-number: FL73330FL73330FC38502E-A
VISOCALL PLUS
Datasheets
Room terminals
For countersunk installation in patient rooms and other important rooms; communications centres for nursing staff, for ELAC reception etc.
Necessary components for countersunk mounting: Type: ST Type: VST Type: DRDR-ST Type: HZEKHZEK-2 Necessary components for surface mounting: Type: ST Type: VST Type: APAAPA-ST Order number: FC008102 Order number: FC008100 Order number: FC008990 Order number: FC008102 Order number: FC008100 Order number: FC008101 Order number: FC88008FC88008-
35
FC38502E-A
VISOCALL PLUS
Datasheets
Necessary components for countersunk mounting: Type: STST-D Type: VST Type: DRDR-ST Type: HZEKHZEK-2 Necessary components for surface mounting: Type: STST-D Type: VST Type: APAAPA-ST Order number: FC008103 Order number: FC008100 Order number: FC008990 Order number: FC008103 Order number: FC008100 Order number: FC008101 Order number: FC88008FC88008-
36
FC38502E-A
VISOCALL PLUS
Datasheets
Mini terminal
Mini terminal for connection to the ward bus (like room terminals) for areas without speech connection. Designed for calls, emergency calls, presence indication, call forwarding, doctor calls and doctor presence. Cancelled and displayed at the main query location and the query control centre.
1 display unit 2 lines each with 16 characters 1 call button (red) with control LED (red), finder light included can be programmed using DIL switches: - Room call button with indicator lamp - WC call button with indicator lamp presence buttons, orange button (doctor) and green button (nurse) including control LEDs and can be programmed using DIL switches. - Presence button (nurse) with cancel function and presence indicator lamp - Presence button (nurse) without cancel function and presence indicator lamp - Cancel button 1 doctor call button (orange) including control LED (orange) The doctor call input can also be programmed and used as a second WC call input via the DIL switches. In this case the doctor call function is disabled. 1 audible alarm (call forwarding) 1 diagnostic call circuit indicator lamp outputs (dependent on programming) call lamp circuits (each 10 Watt) 1 presence lamp circuit (10 Watt) including connection panel with screw-free clips; including covering panel 160x83x13mm (HxWxD) plastic casing in colour RAL 9010 Order number: FC008115
Dimensions:
Type: STMSTM-AD
Type: STMSTM-A
37
FC38502E-A
VISOCALL PLUS
Datasheets
Type: STMSTM-D
Type: STM
38
FC38502E-A
VISOCALL PLUS
Datasheets
Bus interface
For controlling group signal lamps as well as activating the paging system and message transfer; the necessary control modules must be ordered separately.
1 connecting circuit board for mounting in type GBI installation case, with screw clips (for power supply connections) and screw-free clips (other connections), with fuse and multipoint plug base for the controller bus interface as well as four multipoint plug bases for a maximum of four control modules of type TBI or RBI, 1 controller bus interface (connectable) with microcomputer systems and DIL witches for addressing and assignment of functions; ready for addressing and connection For installation in unit GBI (Bus interface case) - see point 7.4
A functioning group terminal contains the following components: Type: VBI Type: CBI Type: GBI Order number: FC008500 Order number: FC008503 Order number: FC008504
Type: TBI
Type: RBI
39
FC38502E-A
VISOCALL PLUS
Datasheets
Dimensions:
264x214x91mm (HxWxD)
Type: GBI
40
FC38502E-A
VISOCALL PLUS
Datasheets
Miscellaneous
Call display, Reminder / Nurse, Reminder / helper nurse and Reminder doctor;
including wiring connections and connection panel with screw-free clips; Type: SI Order number: FC008910
1 program button (P), 1 single character display for displaying the selected program and buttons (< and >) for volume control.
including connection panel with screw-free clips and covering panel Dimensions: Type: RDF 80x83x13mm (HxWxD) in colour RAL9010 Order number: FC008130
a plastic case with the following connections connection clips for 24V inductance coil connection clips for potential-free contact (250V~/10A) 29x61x26mm (HxWxD) Order number: FC008996
Dimensions:
Type: FS1/24DC
41
FC38502E-A
VISOCALL PLUS
Datasheets
a plastic case with connection clips for the room bus Connection clips for the foreign system 25x85x42mm (HxWxD) Order number: FC008340
Dimensions: Type: SM
Printed circuit board with electronics for installation in a double connection box or in a double surface mounted case. Connection socket (4 pin) for diagnostic calls Screw-less connection clips for extensions for each patient bed incl. covering panel 160x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008330
Dimensions:
Type: DE
1 stainless steel call button Integrated speaker and microphone Connection panel with screw clips 255x160x40mm (HxWxD) stainless steel metal case
Dimensions:
Necessary components for countersunk mounting: Type: IT Type: HZEKHZEK-2 or Type: ZEKZEK-2 Order number: FC88009FC88009Order number: FC008110 Order number: FC88008FC88008-
42
FC38502E-A
VISOCALL PLUS
Datasheets
1 call button (red, with nurse symbol) with a control LED, finder light included 1 loudspeaker and 1 microphone; Dimensions: 255x176x25mm (HxWxD) plastic casing in colour RAL9010
43
FC38502E-A
VISOCALL PLUS
Datasheets
Text terminal
Display in corridor for recapitulating displaying of emergency calls, calls, reminders, time and date
Type: VTXT
44
FC38502E-A
VISOCALL PLUS
Datasheets
Type: TXTTXT-D
Type: TXTTXT-2D
45
FC38502E-A
VISOCALL PLUS
Datasheets
10 Ward Terminal
For area-related and general signalling, speech connections, announcements etc. Each query location automatically recognises it corresponding area.
1 function circuit board with a microcomputer system and the necessary interfaces, designed for all the functions that can be queried here, as well as for interconnection of groups, group care, interconnection of rooms from different wards and enhanced patient calls; furthermore designed for programming (addressing, automatic time-related formation of groups etc.). simple to use thanks to multiple uses of function keys Colour graphic display, 1/4 VGA resolution (320 x 240 pixels) with relevant menu display and status and functions line blue function keys to the left and right of the display for menu selection purposes yellow function keys below the display for scrolling or also for menu selection purposes RS232 interface for connection to control panel 1 sound emitting device for acoustic signals as well as 1 query receiver (connectable) containing a loudspeaker and microphone unit, can automatically be switched to hands-free mode and built-in for this purpose. 1 loudspeaker and 1 microphone Volume and microphone levels can be set via the software menu Ward terminal with standard configuration program for system related settings without opening the case including 3m connection cord and multipole connector plug.
When the ward terminal is connected to a control panel, the control panel receives all the relevant information it requires from the ward terminal via the RS232 serial interface. The ward terminal itself is then used a hands-free unit or as a classical handset.
Dimensions:
Type: DZT
46
FC38502E-A
VISOCALL PLUS
Datasheets
Plastic cover (ST) for connection of the ward terminal. using integrated multiple connector plug ribbon cable connection ready for connection to the distribution board "V-DZT" 255x176x50mm (HxWxD) plastic casing in colour RAL9010
Dimensions:
Type: AEAE-DZT *) Parts for "AE-DZT": 1 Cover FC008003-1 distribution board -Type: A-DZT V-DZT
Necessary components for installation in a countersunk case: Type: DRDR-ST Order number: FC008101
Necessary components for installation in a surface mounting case: Type: APAAPA-ST Order number: FC008990
47
FC38502E-A
VISOCALL PLUS
Datasheets
Type: SWPSWP-LS
Type: SWPSWP-PV
48
FC38502E-A
VISOCALL PLUS
Datasheets
Type: SWPSWP-EDB
Minimum system requirements: see point 11.9 Order number: FC008057 Order number: FC008059
11.6 Toolbox
The toolbox contains a CD for the installation as described in the software modules from 11.1 till 11.5. The applications will beinstalled with this CD but not licensed.
Type: SWPSWP-TP
49
FC38502E-A
VISOCALL PLUS
Datasheets
Intel Pentium 1.8Ghz RAM: min. 512KB HDD 80GB, DVD-ROM LAN Intel 10/100/1000 onboard, RJ45 connection VGA Graphics card (onboard or PCI) Keyboard and mouse 1 serial interface
50
FC38502E-A
VISOCALL PLUS
Datasheets
12 Interfaces
The central interface acts a central interface between all ward terminals installed in the system. Furthermore, foreign systems can also be connected, so that status information about the nurse call system can also be used outside of VISOCALL PLUS.
Central master circuit board pole SUB/D socket for upload and configuration using a PC Insertion slots for expansion using slave components Blue metal case for surface installation in electricity distribution case Ambient temperature: 0C to +50C Relative Air Humidity: 5-95% without condensation
Type: ZIZI-S
Type: SWPSWP-QD
51
FC38502E-A
VISOCALL PLUS
Datasheets
52
FC38502E-A
VISOCALL PLUS
Datasheets
Mechanical details: Tube: Format: Dimensions: Weight: Connections: IEC socket: Hospital interface: 75 Ohm, aerial / cable Interface for VISOCALL PLUS (RSIG) IR and sound (Scart II) Full load max. 25W Standby 5W 21, 55cm, visible 51cm 4:3 440x490x470mm (HxWxD) 19.8 kg
Power cable and plug integrated into the set. TV set in colour RAL9010 Type: SOLEX M55B Order number: FC007020
53
FC38502E-A
VISOCALL PLUS
Datasheets
Metal console, with an attachment plate to attach the TV set to Flange prepared for wall-mounting
Dimensions: Mounting flange: 355x205x25mm (HxWxD) Arm: 40x30x365mm (HxWxL) Mounting panel: 430x275mm (WxD), 3 mm panel Type: WKWK-S Order number: FC007004
pole cable with pre-fitted plug at both ends Order number: FC81806FC81806-
Type: KABKAB-VST
Type: AEAE-FAK
Aerial cable for transmission of the aerial signal SCART cable for transmission of the IR and sound signal
54
FC38502E-A
VISOCALL PLUS
Datasheets
Type: PR106GR
55
FC38502E-A
VISOCALL PLUS
Datasheets
13.8 TV Terminal
TV Terminal for watching television and listening to the radio for each bed. The unit is mounted on a wall-mounted arm or an arm attached to the bedside cabinet and can easily and comfortably be moved into any desired position by using the hand grip; The screen can either be delivered in a 10 or a 12 screen size (see article no.), with the plastic case being the same size for both versions. Games console/DVD: Y/C and CVBS inputs can be found on the underside of the unit for connecting a games console or a DVD player respectively. Reading light:: A reading lamp on the underside of the unit provides adequate light. The neighbouring patient will not be disturbed by this lighting source. Electrical details: Power supply on console: Power consumption: Ambient temperature: Tuner VHF/UHF/cable (Hyperband): recommended signal strength: TV program memoriess: Radio program memories: TV Standards: Mechanical details: Monitor: Format: Dimensions: Weight: Connections: IEC socket: Y/C, Hosiden DIN socket: CVBS, Cinch socket: Audio left/right, Cinch WH/RD: 3.5mm jack plug: 75 Ohm, aerial / cable SVHS input Cinch input - video Cinch input audio Output for stereo sound TFT LCD 10", 640x480 pixels (VGA) 12", 800x600 pixels (SVGA) 270x370x55mm (HxWxD) 3 kg 230V~/50Hz 50W (see 13.12/13.17) in operation 12V/40W (including reading light) standby mode typically +5C to +40C TV: 48.25MHz to 855.25MHz Radio: 87.5MHz to 108MHz >65dBV for TV reception >30dBV for stereo radio reception 99 99 PAL B/G for Austria, Germany and Italy
Caution: When using a TVT unit, the handset must be ordered separately. Two different versions of handset exist for this purpose, see points 2.3 and 2.4.
Type: TVTTVT-12
56
FC38502E-A
VISOCALL PLUS
Datasheets
Caution: When using a MMT unit, the handset and keyboard must be ordered separately. Please consult points 2.3, 2.4 and 13.20. Type: MMT Order number: FC009614
57
FC38502E-A
VISOCALL PLUS
Datasheets
13.10
Type: on demand
13.11
Intel 2,8 GHz Min. 4GB RAM min. 80 GB HDD IDE (Suse Linux 9.0 kompatibel) min. 48x DVD-R LW FDD 3.5 1.44MB LAN Intel 10/100/1000 onboard, RJ45 connection LAN network card PCI 100Mbit, RJ45 connection 56Kbaud Modem (Remote maintenance) Keyboard and mouse (including mousepad) operating system Suse Linux 9.0 Including all necessary applications
Caution: The maximum number of patients simultaneously surfing the Internet will be assumed to be approx. 10% of all MMT units in operation. If the above number of 30-40 is exceeded, we recommend installing an extra application server. Internet set-up times on MMT units will thereby be shortened.
Type: APSAPS-MMT
58
FC38502E-A
VISOCALL PLUS
Datasheets
13.12
Wall console
Wall console for wall-mounting of the patient TV terminal.
230V~ AC power supply connection Aerial connector case for connecting aerial wires Metal panel for mounting the console on the wall Plastic covering in colour RAL9010
Caution: neither unit SV-B, SVT-B nor TVI are included as supplied. Dimensions: Weight: Metal base plate: Cover: 8 kg 249x241x14mm (HxWxD) 290x245x12.5mm (HxWxD)
Type: WKWK-TVT
13.13
jointed swivelling arm, moveable through all three axes. Bottom joint of the arm can be tilted up to 50 Internal pre-fitted cable Case made of metal in colour RAL9010
Dimensions: Extended: Upper arm: Lower arm: Weight: 220x1710x70mm (HxWxD) 105x750x70mm (HxWxD) measurement points to the centre of the joints 80x800x70mm (HxWxD) measurement points to the centre of the joints 10 kg
13.14
Type: WAWA-Griff
59
FC38502E-A
VISOCALL PLUS
Datasheets
13.15
Shaped metal tube in colour RAL9010 Internal pre-prepared cable for various connections 850x500x35mm (HxW x Diameter) 6 kg
Dimensions: Weight:
Type: NANA-TVT
13.16
Aluminium cast part in colour RAL 9010 Aluminium base plate for fixing to the bedside cabinet or item of furniture
Dimensions:
150x60x70mm (HxWxD)
Type: NANA-H
13.17
Caution:
Metal case in colour RAL 9010 Connection box for aerial connection (coaxial cable) LAN connection (only applicable for Multimedia Terminal) Connection clips 230V~ Alternating Current 12V DC power supply Mounting holder for TVI and SVB/SVB-T neither unit SV-B, SVT-B nor TVI are included as supplied. 130x300x130mm (HxBxT) 5 kg Order number: FC009610
FC38502E-A
Dimensions: Weight:
VISOCALL PLUS
Datasheets
13.18
TV Interface
TV interface for controlling TV terminal, installed in the wall console or the connection box and consists of:
Caution: patient
Insertion slots for PTVT connection cable Connection for 24V power supply Connection for VCK-B2 Dimensions dependent on placement in the wall console for controlling unit TVT you will require in this instance handset PBG-TV (FC009604) with coiled connection cable. Order number: FC81456FC81456-
Type: TVI
13.19
Caution: patient
Insertion slots for TVT connection cable Connection for 24V power supply Dimensions dependent on placement in the wall console for controlling unit TVT you will require in this instance handset PBG-TVL (FC009608) with coiled connection cable. Order number: ED010714
Type: TVITVI-STA
13.20
coloured multifunctional keys (red, green, yellow and blue) On and off buttons for radio and TV On and off buttons for radio and TV menu as well as Teletext Arrow keys for changing program and setting volume as well as menu navigation Numerical keypad for direct entry of numbers includes coiled cable with high tensile strength and RJ45 connector (connection to RS485 interface on TVT or MMT) 218x60x25mm (HxWxD) plastic case in colour RAL 9010
Dimensions:
Type: RCRC-TVT
61
FC38502E-A
VISOCALL PLUS
Datasheets
14 Power supplies
For power supply within each type of system throughout the ward.
Leakage current and circuit insulation voltage in accordance with EN60601-1 (DIN 750, part 1) Transformer in accordance with VDE 0551 Device earthed, with power switch and control lamp; including power cable and plug. In accordance with VDE0384 the power supply must be connected to its own electric current The primary electrical circuit earthing must be done using a 16A circuit-breaker with B type tripping characteristics. Type: DD-TOP500ME/1TOP500ME/1-ME Order number: FC008702
62
FC38502E-A
VISOCALL PLUS
Datasheets
The battery module contains two maintenance-free lead storage batteries connected in series, each 12V (7Ah)
63
FC38502E-A
VISOCALL PLUS
Datasheets
Power supply: Primary power consumption: Output: Discharge time: Ambient temperature: Dimensions: Weight: Caution:
There is also the possible option of building in an additional battery module in to the UPS case. This add-on increases the battery capacity to 28Ah.
Type: VCPVCP-USV
64
FC38502E-A
VISOCALL PLUS
Datasheets
Recommended cooling clearance: above/below 70mm each, right/left 25mm each All connection terminals can be easily reached from the front side of the device, furthermore PVC cable can be used for all the connections terminals, because they are on the bottom side of the cool area.
Type: SL20.101
65
FC38502E-A
VISOCALL PLUS
Datasheets
15.1 Switchbox *) (AT, RT, ZT, PT, ART, AW2, RAT, RDF, SVMSVM-K, ...)
For countersunk installation; made of plastic, flame retardant in accordance with DIN/VDE 0606 Part 1 /11.84; main body conforms to DIN 49030; suitable for parts in accordance with DIN 49200. Plastic part does not contain halogens. Dimensions: Type: U1 60 mm diameter, H=40mm, distance between device screws 60 mm Order number: FC88010FC88010-
15.3 Switchbox *) (AT, RT, ZT, PT, ART, AW2, RAT, RDF, SVMSVM-K, ...)
For cavity wall installation with mounting screws and device screws; made of plastic, flame retardant in accordance with DIN/VDE 0606 Part 1 /11.84; main body conforms to DIN 49073; suitable for parts in accordance with DIN 49200. The switchbox is available on request in a halogen-free variant. Dimensions: Type: H1 60 mm diameter, H=45mm, distance between device screws 60 mm Order number: FC88011FC88011-
66
FC38502E-A
VISOCALL PLUS
Datasheets
Dimensions:
140x242x65mm (WxHxD)
Type: ZEK2
Dimensions:
140x242x65mm (WxHxD)
Type: HZEK2
Note: Screws for devices in countersunk switchboxes (2 per single box, 4 per double box) as well as for connecting circuit boards in installation cases (4 screws each) are not included. The following are required: standard countersunk self-tapping screws with 3.2mm diameter, L = 15 mm, corrosion resistant in accordance with DIN50018.
Type: HB
Type: AZ2
67
FC38502E-A
VISOCALL PLUS
Datasheets
Type: Gd5Gd5-9 Type: Gd5Gd5-2 Type: Gd5Gd5-3 Type: Gd5Gd5-6 Type: Gd5Gd5-7
wh rd gn ye or
Order number: number: FL73309FL73309Order number: FL73310FL73310Order number: FL73311FL73311Order number: FL73321FL73321Order number: FL73330FL73330-
15.10
Type: CATCAT-5
15.11
15.12
68
FC38502E-A
VISOCALL PLUS
Datasheets
15.13
ELAC Transmitter *)
for the connection of a program circuit throughout the ward to the riser circuits coming from the ELAC control centre; technical specifications: Primary voltage Secondary voltage Secondary power 100V ~ 2.5V ~ 0.6/1.25/2.5/5/10W;
15.14
Type: APAAPA-ST
15.15
Type: APAAPA-2
69
FC38502E-A
VISOCALL PLUS
Datasheets
15.16
Type: APAAPA-1
70
FC38502E-A
VISOTAX PLUS
71
FC38502E-A
VISOTAX PLUS
General
General
In many hospitals the requirement for the provision of services for patients is constantly increasing. TV and radio as well as telephones are available, either free of charge or as a chargeable extra. For this reason, the competent specialist companies are called upon to offer new innovations and complete solutions time and time again. Schrack Seconet has created a solution with its VISOTAX PLUS solution, which not only contains the functions listed above, but also additionally allows billable internet access. The VISOTAX PLUS billing system is installed as an independent system, but can, however, also be combined the already familiar VISOCALL PLUS system. The patient handsets with telephony functions possess an integrated smart card reader. All services that are used are debited from the account which has been assigned to the patient using the ISO smart card. Schrack Seconet would also like to be able to offer innovative customer-oriented systems in the future and therefore hopes for the continued support from hospital decision-makers.
72
FC38502E-A
VISOTAX PLUS
System Description
System Description
1 General
VISOTAX PLUS is a very flexible billing system. It can be customised to suit customer-specific requirements and wishes by means of simple programming. The greatest demand is placed on such a system by the billable services, which the hospital is able to make available to the patient. These services include, for example: Telephone billing TV billing for a basic fee (daily fee for 24 hours) TV billing based on a tariff model (billing per minute) Internet access based on duration charges (billing with billing interval to the second) There are different billing models for the billing of services (telephony, television and Internet access). The key to the system is the smartcard. It is used to identify the patient, and allows the patient to take advantage of the services on offer. Crediting accounts at the payment station is just an unproblematic as the corresponding debiting of the account after a phone call has been made, TV has been watched or an Internet access session. On leaving the hospital the card is surrendered at the payment station and the remaining credit on the account paid out again The type of billing required can be chosen for each patient. Basically there are two modes: pre-paid and post-paid billing (see below). PrePre-paid billing In most instances, this type of billing is preferable. The patient purchases a smartcard at the payment station and the billing system sets up an account for this smartcard. Then it is possible to credit this account with the desired sum of money. The patient then uses the desired services. Prior to leaving the hospital, the patient hands back the smartcard at the payment station and received the balance for his remaining credit there and then. By using this type of billing there is very little administrative effort required and even then it is restricted to system maintenance as well as filling and emptying the payment stations of money. PostPost-paid billing This type of billing does not require the smartcard account to be in credit when first making use of the available services. The post-paid billing system is primarily used, if the patient should not be burdened with making pre-payments. The patient either receives a smartcard either at the payment station or from a workstation and can then use all the services he wishes to. Shortly prior to leaving the hospital he allows his account to be billed and settles the outstanding sum of money. Tariff levels In order for VISOTAX PLUS to remain flexible enough, so-called tariff levels have been prepared for use in the system. The reason for this is varying charging for all charges that can be incurred. Up to 5 different levels can be pre-defined for each system. The levels may have differing levels for basic charges and duration charges as well as for the entering of value added tax. Analyses Analyses and financial statements All services which the patient has made use of can be traced at any time via the billing server. All telephone calls, all credits and debits, as well as TV and Internet access charges are logged and can be printed out at any time. The data remains saved for as long as has been configured in pre-programming. A data backup module allows all data to be archived. Faults The system concept allows for occasional faults to be displayed by pop-up windows on the servers monitors and on workstations. On which monitors these faults are to be displayed can be determined by means of programming and can be changed at any time.
73
FC38502E-A
VISOTAX PLUS
System Description
74
FC38502E-A
VISOTAX PLUS
System Description
75
FC38502E-A
VISOTAX PLUS
System Description
1.3 Internet
Internet timetime-based tariff (only for Multimedia terminal) The billing for internet access is done in a similar fashion to television billing. The patient has credited his account using the smartcard and is logged into the billing system. VISOTAX PLUS knows which physical extension the patient is at. In accordance with the operating instructions the patient would like to surf the Internet. The Internet server receives the information about how long the patient has surfed the Internet for using his/her Multimedia terminal via the LAN connection. As soon as the Internet access session has been terminated, the Internet server sends the billing system the relevant information to that VISOTAX PLUS can debit the costs incurred from the relevant account. If the accounts credit has been used up, then the patient is no longer about to start up the Internet browser, and a message also appears on screen with the information that the user is no longer entitled to Internet access.
76
FC38502E-A
VISOTAX PLUS
System Description
Hardware
A standard PC with the relevant hardware (see p.9) is used in the VISOTAX PLUS system. The PCs can then be used both as servers as well as workstations.
2.3 TV Server
The TV server acts as an interface between the VISOTAX PLUS Server and the TV hub. It is used when the TV terminals and Multimedia terminals which have been installed are to be billed using a channel-based and timebased billing model.
77
FC38502E-A
VISOTAX PLUS
System Description
Software The installed software must perform various tasks. On the one hand it is used to receiving and processing patient and/or staff data as well as the correct assignment and debiting of all services that have been used, as well as one the other hand being used for setting the system and interface parameters. WIN NT4.0 (Service Pack 5) or Windows 2000 (Service Pack 2) acts as a platform for all computers integrated into the system. The LAN is also defined using one of the two operating systems. The collected data is not just centrally managed and saved on the server, but is also served to every workstation and cash register as required. Physically the server is not just connected to the LAN, but is also connected to the telecommunications system.
78
FC38502E-A
VISOTAX PLUS
System Description
Telecommunications system server already available Some telephone systems providers do not want to allow foreign systems to connect to the programming interface for security reasons. Via the programming interface it is possible, in principle to carry out all the available commands listed in the specification, even if they are not necessarily requires by VISOCALL PLUS. Various faults can therefore occur in the telecommunications system as a result. In order to keep the risk of this happening as low as possible, the operators have made a computer application available. This PC may use the widest variety of different systems: Application Link Communication Link BCS Server Hi Path MD110 (ERICSSON) ALCATEL 4400 (ALCATEL) INTEGRAL 55 (TENOVIS) HICOM (SIEMENS)
The PC regulates communications between both foreign systems and VISOTAX PLUS is able to tailor the specifications of its interface accordingly. It can also be ascertained based on this specification, which functions can be carried out from the PC. The basis premise is: For all future projects and also possibly for some currently hitherto unknown software applications, specifications and software descriptions must be obtained from telecommunications systems providers. We will then carry out the necessary customization.
79
FC38502E-A
VISOTAX PLUS
System Description
The Software
Based upon the variety of demands placed upon VISOTAX PLUS, it was essential to implement the concept on a modular basis. The number of extensions used in the system is irrelevant. The modules described below are optional and can be obtained in the form of licenses.
80
FC38502E-A
VISOTAX PLUS
System Description
81
FC38502E-A
VISOTAX PLUS
System Description
The Components
Using the aforementioned components it is possible, in practice, to create any type of system imaginable. The individual settings are carried out using a pre-defined password level in the patient management overlay. VISOTAX PLUS offers the user a carefully designed and clear overview.
4.3 TV Server
With help from the TV Server, VISOTAX PLUS is able to bill TV services according to channels and time watched to the minute. All data about changes of channel are sent from the TV hub to the TV server, and are filtered accordingly to be sent to the billing server. The billing server then bills the user exactly to the minute for the TV fees incurred according to the billing model.
82
FC38502E-A
VISOTAX PLUS
Datasheets
83
FC38502E-A
VISOTAX PLUS
Datasheets
Datasheets
1 Hardware
The following hardware is used during the installation of the VISOTAX PLUS billing system.
Intel P4 Celeron 1.3 GHz processor 256 MB DDR DRAM min. 40 GB HDD min. 48x CD-R LW FDD 3.5 1.44MB Onboard i845G graphics and soundcard Onboard Intel 10/100 LAN serial interfaces (2 onboard, 2 PCI) Smartcard keyboard and mouse (including mousepad) Windows 2000 professional edition maximum power consumption 200W at 230V~
Dimensions: 444 x 205 x 500 mm (H x W x D) Weight: ca. 15 kg as optional extras, there are: 250MB ZIP drive Internal 56Kbps modem
Caution: If patient Internet access is also to be billed, then the applications server described in the VISOCALL PLUS chapter (see 12.11) is also required. Type: VTPVTP-HWHW-SRV Order number: FC007300
1.2 TV Server
Server for data transer and data storage, consisting of: Minimum system requirements:
Intel Pentium 2,8GHz processor RAM: min. 512MB HDD 80GB, DVD-ROM LAN Intel 10/100/1000 onboard, RJ45 connection VGA Grafikadapter (onboard or PCI) Keyboard and mouse
Type: VTPVTP-HWHW-TVS
84
FC38502E-A
VISOTAX PLUS
Datasheets
Intel Pentium 2,8GHz processor RAM: min. 512MB HDD 80GB, DVD-ROM LAN Intel 10/100/1000 onboard, RJ45 connection VGA Grafikadapter (onboard or PCI) Keyboard and mouse
Type: VTPVTP-HWHW-KS
1.4 Workstation
Workstation for editting all patient information, consisting of: Minimum system requirements:
Intel Celeron 1.3GHz processor 256 MB SDRAM min. 20 GB HDD min. 48x CD-R LW FDD 3.5 1.44MB Onboard i845G graphics and soundcard 56Kbps Modem 10 MBits LAN connection 2 serial interfaces (RS232) 2 x PCI slots 1 x AGP slot Smartcard keyboard and mouse Windows 2000 professional edition VISOTAX PLUS software package maximum power consumption 200W at 230V~
Dimensions: 361 x 196 x 350 mm (H x W x D) Weight: ca. 10 kg Type: VTPVTP-HWHW-WS Order number: FC007310
85
FC38502E-A
VISOTAX PLUS
Datasheets
Type: VTPVTP-HWHW-ZIP
Type: VTPVTP-HWHW-VPS4
Type: CHCCHC-KEYB
Type: ChipChip-USB
Type: Monitor
86
FC38502E-A
VISOTAX PLUS
Datasheets
Software Modules
The following software modules are available based on the requirements of the operator.
Admission and discharging of a patient Logging in and logging out of a patient at an extension Debiting and crediting a patient account Deleting recently discharged patients Writing to the smartcard using the smartcard keyboard Assigning the smartcard to a specific patient account Setting the 5 different patient classes Separate way of setting charges for each patient Analysis of call data Printing out invoices
Type: VTPVTP-SWSW-PAV
Type: VTPVTP-SWSW-PEV
Type: VTPVTP-SWSW-TVG
87
FC38502E-A
VISOTAX PLUS
Datasheets
Type: VTPVTP-SWSW-ETB
Type: VTPVTP-SWSW-RAB
Type: VTPVTP-SWSW-GDE
Type: VTPVTP-SWSW-DT
88
FC38502E-A
VISOTAX PLUS
Datasheets
Type: VTPVTP-SWSW-CC
Type: VTPVTP-SWSW-FW
Type: VTPVTP-SWSW-ZIP
Type: VTPVTP-SWSW-TK
Type: VTPVTP-SWSW-IG
89 product catalogue V1.2
VISOTAX PLUS
Datasheets
For low-maintenance VISOTAX PLUS operation there are various types of payment stations available.
Solid sheet steel case (grey) for screwing onto mounting frame, with a lockable door with a security lock and with 4 retaining clips for increased security 10.4 TFT colour display (resolution 640x480 pixels) optional multilingual user interface operator assistance via 8 interactive function keys Banknote checker for recognition of up to 4 banknotes (5/10/20/50) Coin checker for recognition of 6 denominations of coin (0.05/0.10/0.20/0.50/1.00/2.00), of which alternatively three denominations can be accepted. Accepts 3 chosen denominations of coin with automatic coin circulation Combined mechanical smartcard issuing and redemption unit with integrated reader and writer, for up to 443 smartcards. Thermal receipt printer (58 mm width paper roll) Wide change return tray with transparent protective flap for receiving change and receipt. Centralised configuration Maintenance messages are automatically transferred Embedded PC with operating system, software and LAN connection for connection to central billing system or POS server. Remote maintenance possible Connection ~230V 10Mb LAN RJ45 connection 90 kg 1000x580x340 mm (HxWxD)
Type: VTPVTP-KA
90
FC38502E-A
VISOTAX PLUS
Datasheets
Solid sheet steel case (grey) for screwing onto mounting frame, with a lockable door with a security lock and with retaining clips for increased security 10.4 TFT colour display (resolution 640 x 480 pixels) optional multilingual user interface operator assistance via 8 interactive function keys Integrated Austrian credit card and debit card interface for cash-free money transfer in to the VISOTAX PLUS account, for which purpose an ISDN S0 connection is included Banknote checker for recognition of up to 4 banknotes (5/10/20/50) Coin checker for recognition of 6 denominations of coin (0.05/0.10/0.20/0.50/1.00/2.00), of which alternatively three denominations can be accepted. Accepts 3 chosen denominations of coin with automatic coin circulation Combined motorised smartcard issuing and redemption unit with integrated reader and writer, for up to 443 smartcards. Thermal receipt printer (58 mm width paper roll) Wide change return tray with transparent protective flap for receiving change and receipt. Centralised configuration Maintenance messages are automatically transferred Embedded PC with operating system, software and LAN connection for connection to central billing system or POS server. Remote maintenance possible Connection ~230V 10Mb LAN RJ45 connection
90 kg 1000x580x340 mm (HxWxD)
Type: VTPVTP-KAKA-KIA
Type: VTPVTP-KAKA-KID
91
FC38502E-A
VISOTAX PLUS
Datasheets
Weight: Dimensions:
Type: VTPVTP-KAKA-MR
Weight: Dimensions:
Type: VTPVTP-KAF
92
FC38502E-A
VISOTAX PLUS
Datasheets
For controlling payment stations as well as for multilingual user interface, the following software modules are available:
Type: VTPVTP-SWSW-CC
Type: VTPVTP-KIK
Type: VTPVTP-SWSW-L
93
FC38502E-A
VISOTAX PLUS
Datasheets
TV Interfaces
For the various billing methods of TV charges, there are various TV Interface controller units available:
Type: TVI
Type: TVITVI-STA
94
FC38502E-A
VISOTAX PLUS
Datasheets
Type: SVTSVT-BZTV
5.5 TV Hub
Interface between TV Server application and TV terminals and/or Multimedia terminals for data acquisition, compression and transferring to the billing system, consisting of:
Sheet steel case which can be locked using a key lock for connection of a maximum of 256 TV terminals or Multimedia terminals Power supply 230V~ with cold connector for connection to the power line 19 rack contains: -) 230V~ power supply -) Slots for a maximum of 8 slide-in cards each with 32 connections (TVT/MMT) pin SUB-D connector for connection to the TV server (RS422) Possibility to connect an additional TV hub Blue metal case for surface installation in electricity distribution case Ambient temperature: 0C to +50C Relative Air Humidity: 5-95% without condensation 600 x 445 x 225mm (H x W x D) ca. 15kg
Dimensions: Weight:
Type: TVH
Type: TVNI32
95
FC38502E-A
VISOTAX PLUS
Datasheets
Connection for 9 pin SUB-D female connector (RS232) Connection for connection strip (RS485 and RS 422)
2 pin connection for a 12V DC load. 350mm connection cable Maximum output current 2.5A, stabilised Wattage: 15W 165x65x40mm (HxWxD) without plug 165x65x75mm (HxWxD) with plug
Dimensions:
Type: NE 109
96
FC38502E-A
VISOTAX PLUS
Datasheets
Accessories
6.1 Smartcard
Standard smartcard in accordance with ISO standard 7816. It acts as the key to VISOTAX PLUS. With the smartcard, the patient has access to all services offered in the system. The smartcard can be printed with any graphic (in jpeg format) on both sides using 4 colour printing.
Type: VTPVTP-CK2x4C
97
FC38502E-A
VISO-OPT PLUS
VISOVISO-OPT PLUS
98
FC38502E-A
VISO-OPT PLUS
System Description
System Description
1 Characteristic System Properties
The VISO-OPT PLUS emergency call system enables people requiring assistance to raise the alarm at a central location within a building or building complex. The system can, for example, be deployed in the following areas: Bathroom emergency calls in hotels, emergency calls for disabled toilets in public buildings, schools etc. or also for emergency calls for changing room cubicles in out-patient clinics and doctors practices.
1.1 Standards
Presuming that established VISOCALL PLUS call components (RT, ZT and PT) have been installed in the call inputs for VISO-OPT PLUS, VISO-OPT PLUS adheres to the following currently valid standards and regulations: VDE 0834 Part 1 area of application A
VISO-OPT PLUS Fully equipped basic terminal (4 soffit lamps): 0.98A with 100% concurrence Fully equipped extension terminal (8 soffit lamps): 1.86A with 100% concurrence
System Description
Accessories Accessories, such as countersunk cases and surface mounted cases, can be found in chapter 14 of the VISOCALL PLUS section.
100
FC38502E-A
VISO-OPT PLUS
System Description
3.4 Faults
Since the VISO-OPT PLUS system is an emergency call system, the quiescent current of all call inputs is monitored, however, only when used with the VISOCALL PLUS call button, pneumatic button and pull button. In operating conditions this means that a fault is announced immediately, as sound as the call circuits and/or the call devices are damaged or disconnected (due to a wire break or a short circuit). The control LED for a fault lights up and the buzzer sounds. There is also the possibility of transferring the announcement of the fault to other systems, by using the fault relay.
101
FC38502E-A
VISO-OPT PLUS
Datasheets
Datasheets
1 Terminals
For the centralised displaying of calls from all call locations within the system.
A membrane keypad with: - 4 cancel buttons including control LEDs - 1 buzzer acknowledgement button - description tags Electronic audible alarm voltage-free group call output voltage-free group fault output Green operation LED Yellow fault LED Connection clips for cal components and extension terminal
Dimensions: incl. covering panel 160x83x13mm (HxWxD) in colour RAL 9010 Type: VOVO-BT Order number: FC008950
A membrane keypad with: - 8 cancel buttons including control LEDs - description tags Connection clips for cal components and extension terminal incl. covering panel 160x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008951
Dimensions:
Type: VOVO-ZT
102
FC38502E-A
VISO-OPT PLUS
Datasheets
Connectable components
VISO-OPT PLUS offers the optimal solution as well as providing integrated quiescent current monitoring in conjunction with VISOCALL PLUS components.
1 call button (red, marked with a nurse symbol) on a membrane keypad with 2 control LEDs, finder light included 1 connection panel with screw-free clips; incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008400
Dimensions: Type: RT
Membrane with a control LED, finder light included 1 connection panel with screw-free clips; including 2m cord with grip incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008410
Dimensions: Type: ZT
Membrane with a control LED, finder light included 1 connection panel with screw-free clips; incl. 2 m pneumatic tubing with a pressure ball incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008420
Dimensions: Type: PT
1 cancel button (green) on a membrane keypad with a control LED, 1 connection panel with screw-free clips; incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010 Order number: FC008430
FC38502E-A
Dimensions: Type: AT
103
VISO-OPT PLUS
Datasheets
1 connector for contact for push button type BT-RK 1 call button (red, marked with a nurse symbol) on a membrane keypad with 2 control LEDs, finder light included 1 connection panel with screw-free clips; incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010
Dimensions:
Caution: Connection device SVM-K can only be used in conjunction with the power supply described in point 3.1 below. If the connection device is connected to terminals which use the transformers displayed below in points 3.2 and 3.3, then the connection device will not function properly. Type: SVMSVM-K Order number: FC008320
1 call button (red, marked with a nurse symbol) with 2 control LEDs, finder light included 6.3mm jack plug for connection to unit SVM-K Includes a 2.8m connection cable 90x60x20mm (HxWxD) plastic casing in colour RAL 9010
Dimensions:
Type: BTBT-RK
104
FC38502E-A
VISO-OPT PLUS
Datasheets
As the terminals installed within the system require 24V DC current, the necessary power supply is described below.
105
FC38502E-A
VISO-OPT PLUS
Datasheets
3.3 3.3
Transformer 100VA
Single phase transformer - sealed-in model (IP56) with electrically isolated primary and secondary windings. Manufactured in compliance with VE regulation M/EN 61558, moisture proofed by impregnation. Technical details: Power supply: Primary current: Glass fuse: Secondary current: OEK regulation: Warmth class B: Isolation range 1: Connection: Dimensions: Weight: Type: TR100 230V/50Hz 0.52 A 0.71A (secondary) 4.17 A M/EN 61558 max. ambient temperature 40C at 75C excess temperature Testing voltage 4000V/50Hz for 1 minute Primary and secondary side screw clips 112x146x158mm (WxHxD) 2.4 kg
106
FC38502E-A
VISOCALL FUNK
107
FC38502E-A
VISOCALL FUNK
The VISOCALL FUNK system is used in particular in old peoples homes and care homes or also in certain areas within a hospital. The system is primarily used to supplement the nurse call system, but can, however, also be combined with a phone dialling device for use privately.
108
FC38502E-A
VISOCALL FUNK
Datasheets
Datasheets
1 Radio components
For plugging into the VISOCALL PLUS connection devices or into 6 pin DIN sockets in standard single installation cases and all other foreign systems which make a voltage-free input available for the call receiver.
A plastic case with membrance and cable approx. 100mm long 1 socket for DIN connector red control LED for visual signalling of a call having been triggered. green control LED for displaying operating status yellow control LED for displaying battery status
Dimensions:
Type: EE2EE2-6
109
FC38502E-A
VISOCALL FUNK
Datasheets
A plastic case with membrance and cable approx. 100mm long 1 socket for a 15 pin SUB/D connector red control LED for visual signalling of a call having been triggered. green control LED for displaying operating status yellow control LED for displaying battery status 95x47x57mm (HxWxD) in colour RAL 9010
Dimensions:
Type: EE2EE2-15
Plastic case with membrane 1 socket for 6 pin EE2-6 incl. covering panel 80x83x13mm (HxWxD) in colour RAL 9010 Order number: FC007980
Dimensions:
Type: SVSV-F
110
FC38502E-A
VISOCALL FUNK
Datasheets
A plastic case with integrated call button for call triggering Plastic wrist strap with fastening red control LED for visual signalling of a call having been triggered. Range: up to 20m in a clear line of sight and triggered as hip level Integrated battery monitoring Transmitter 45x40x15mm (HxWxD) in anthracite colour Wrist strap 200x25x5mm (LxWxD) in colour black
Dimensions:
A plastic case with integrated call button for call triggering Plastic chance with fastener red control LED for visual signalling of a call having been triggered. Range: up to 20m in a clear line of sight and triggered as hip level Integrated battery monitoring Transmitter 60x40x16mm (HxWxD) in anthracite colour Chain 800x5mm (LxDiameter) in colour grey
Dimensions:
Type: US2
A plastic case with integrated call button for call triggering red control LED for visual signalling of a call having been triggered. Range: up to 15m in clear line of sight Integrated battery monitoring 100x35mm (Diameter x H), red button ca. 165g Order number: FC007966
111
FC38502E-A
VISOCALL FUNK
Datasheets
SCHRACK SECONET AG
www.schrackwww.schrack-seconet.com
112
FC38502E-A