Académique Documents
Professionnel Documents
Culture Documents
OVERPACKING TECHNIQUES
Most overpack situations can be handled using one of the following techniques.
Inverted Overpack Technique / Place the damaged drum on the overpack lid. Slide the overpack over the drum. Rotate them upright.
Twist-down lid for safe closure Closed cell gasket in lid helps seal closure Patented castellations in lid allow for easy closing with pole or wooden two-by-four Double wall lid gives added strength Molded area allows for easy gripping and pick-up by material handling equipment Patented ribbed design provides extra strength 100% UV-protected polyethylene provides protection over a wide range of chemicals
Roller Technique / Place the damaged drum on its side with 1- to 2-inch metal rollers (water pipe works fine) underneath it. Place the overpack so that the damaged drum can be rolled most of the way into the overpack. Then turn the overpack upright.
DOLLAR FOR DOLLAR, THE MOST COST EFFICIENT SALVAGE DRUM YOU CAN BUY! ASK US!
Drum Lifting Technique / A drum lifter is attached to the damaged drum. Then a crane, forklift or hoist lifts the drum into the overpack.
Drum Lifter lifts and lowers 55-gallon drums with ease! Safely lifts steel drums up to 1,000 lbs. and fits both openand closed-head designs. Tension spring adapts to diameter of drum. (Product No. 3100-BU)
Angle Roll Technique / Place the damaged drum and overpack end-to-end at an obtuse angle. Both are rolled simultaneously so that the drum works its way into the overpack. When inward progress stops, reverse the original angle and roll in the opposite direction. Continue the process until the drum is in the overpack. Then turn the overpack upright.
A qualified salvage drum meets or exceeds the key features defined in Department of Transportation regulations 49 CFR 173.3 in the following critical ways: Meets or exceeds United Nations performance requirements and is marked for Packing Group III or higher. Passes a 3-psi pressure test. Does not exceed volume or capacity limits. Is marked with the specific words salvage or salvage drum. OVERPACKS to provide protection for packages of solids OR...for convenience in handling a package or consolidating packages of solids. SALVAGE DRUMS for the transport of damaged or leaking drums of hazardous liquids and hazardous materials that have spilled or leaked.
SPECIFICATIONS
POLY-OVERPACK 95
Product No.: 1237-YE Dimensions Top Diameter: Ext / 31.75 / 81 cm Int. /27 / 69 cm Bottom Diameter: Ext / 26 / 66 cm Int. /24.75 / 63 cm Height: Ext / 41.5 / 105 cm Int. / 37 / 94 cm Weight: 48 lbs. / 21.6 kg Handling Capacity: 650 lbs. / 292.5 kg Capacity Sump Capacity: 95 gal. / 361 liters Regulations: UN 1H2/X295/S, UN 1H2T/Y295/S, DOT 49 CFR 173.3(c), EPA, SPCC and NPDES
POLY-OVERPACK 95T
Product No.: 1137-YE Dimensions Top Diameter: Ext / 35 / 89 cm Int. /27 / 69 cm Bottom Diameter: Ext / 26 / 66 cm Int. /24.75 / 63 cm Height: Ext / 41.5 / 105 cm Int. / 37 / 94 cm Weight: 54.5 lbs. / 24.5 kg Handling Capacity: 650 lbs. / 292.5 kg Capacity Sump Capacity: 95 gal. / 361 liters Regulations: UN 1H2/X295/S. DOT 49 CFR 173.3(c), EPA, SPCC and NPDES
POLY-OVERPACK 110
Product No.: 1240-YE Dimensions Top Diameter: Ext / 31.75 / 81 cm Int. /27 / 69 cm Bottom Diameter: Ext / 26 / 66 cm Int. /24.75 / 63 cm Height: Ext / 45 / 114 cm Int. / 40.5 / 103 cm Weight: 50.5 lbs. / 22.7 kg Handling Capacity: 650 lbs. / 292.5 kg Capacity Sump Capacity: 105 gal. / 399 liters Regulations: UN 1H2/X295/S, DOT 49 CFR 173.3(c), EPA, SPCC and NPDES
SPECIFICATIONS
POLY-OVERPACK 65
Product No.: 1065-YE Dimensions Top Diameter: Ext / 28.25 / 72 cm Int. /23.5 / 60 cm Bottom Diameter: Ext / 23 / 58 cm Int. /21.75 / 55 cm Height: Ext / 37.37 / 95 cm Int. /33.5 / 85 cm Weight: 45 lbs. / 20.5 kg Handling Capacity: 440 lbs. / 200 kg Sump Capacity: 65 gal. / 247 liters Regulations: UN 1H2/X200/S, DOT 49 CFR 173.3(c), EPA, SPCC and NPDES
WHEELED OVERPACK 95
Product No.: 1299-YE Dimensions Top Diameter: Ext / 32 / 81 cm Int. /27 / 69 cm Bottom Diameter: Ext / 36 / 91 cm Int. /25 / 64 cm Height: Ext / 47 / 119 cm Int. /37 / 94 cm Weight: 56 lbs. / 25 kg Handling Capacity: 250 lbs. / 113 kg Sump Capacity: 95 gal. / 361 liters Regulations: UN 1H2/X113/S, DOT 49 CFR 173.3(c), EPA, SPCC and NPDES
WHEELED OVERPACK 50
Product No. 1259-YE Dimensions Top Diameter Ext / 24.5 / 62 cm Int. /20 / 50 cm Bottom Diameter Ext / 18.5 / 47 cm Int. /17.75 / 45 cm Height Ext / 39.5 / 100 cm Int. /34.5 / 87 cm Weight 38 lbs. / 17 kg Handling Capacity 275 lbs. / 125 kg Sump Capacity 50 gal. / 190 liters Regulations UN 1H2/X125/S, DOT 49 CFR 173.3(c), EPA, SPCC and NPDES
NEW
SPECIFICATIONS
POLY-OVERPACK 20
Product No.: 1220-YE Dimensions Top Diameter: Ext / 23 / 58.42 cm Int. /21.5 / 56.61 cm Bottom Diameter: Ext / 18 / 45.72 cm Int. /17 / 43.18 cm Height: Ext / 19 / 48.26 cm Int. / 17.5 / 43.18 cm Weight: 10 lbs. / 24.54 kg Handling Capacity: 166 lbs. / 75 kg Sump Capacity: 20 gal. / 51 liters Regulations: UN 1H2/X75/S, DOT 49 CFR 173.3 (c), EPA, SPCC and NPDES
POLY-OVERPACK 30
Product No.: 1230-YE Dimensions Top Diameter: Ext / 23 / 58.42 cm Int. /21.5 / 56.61 cm Bottom Diameter: Ext / 18 / 45.72 cm Int. /17 / 43.18 cm Height: Ext / 30 / 76 cm Int. / 28.5 / 72 cm Weight: 13 lbs. / 6 kg Handling Capacity: 221 lbs. / 100 kg Sump Capacity: 30 gal. / 114 liters Regulations: UN 1H2/X100/S, DOT 49 CFR 173.3 (c), EPA, SPCC and NPDES
POLY-OVERPACK 600
Product No.: 1051-YE Dimensions Top Diameter: Ext / 60 / 152 cm Int. / 51.25 / 130 cm Bottom Diameter: Ext / 49.25 / 125 cm Int. / 47.75 / 121 cm Height: Ext / 70 / 178 cm Int. / 66 / 168 cm Weight: 225 lbs. / 101.25 kg Handling Capacity: 5000 lbs. / 2250 kg Sump Capacity: 600 gal. / 2271 liters Regulations: EPA 40 CFR 761.65, SPCC and NPDES
ITS HUGE!
POLY-OVERPACK 180T
Product No.: 1180-YE Dimensions Top Diameter: Ext / 40.25 / 102 cm Int. / 31.38 / 79 cm Bottom Diameter: Ext / 30.5 / 77 cm Int. / 29 / 73 cm Height: Ext / 57 / 145 cm Int. / 51.25 / 130 cm Weight: 116 lbs. / 52.2 kg Handling Capacity: 2500 lbs. / 1125 kg Sump Capacity: 180gal. / 684 liters Regulations: EPA 40 CFR 761.65, SPCC and NPDES
OVERPACKS to provide protection for packages of solids-OR-for convenience in handling a package or consolidating packages of solids. SALVAGE DRUMS for the transport of damaged or leaking drums of hazardous liquids and hazardous materials that have spilled or leaked.