Académique Documents
Professionnel Documents
Culture Documents
Dell PowerEdge R710 featuring the Energy Smart 570W Power Supply
System Characteristics
Form Factor Available Processor Sockets Available DIMM Slots / Max Memory Capacity ECC and/or Fully Buffered DIMMs Available Expansion Slots Minimum and Maximum # of Hard Drives Redundant Power Supply Capable? Power Supply Make and Model Power Supply Output Rating1 (watts) Minimum and Maximum # of Power Supplies Input Power Range (AC or DC) Power Supply Efficiency at Specified Loadings1 Power Supply Power Factor at Specified Loadings1 2U 2 18/144 GB Yes 4 PCI-E 0 to 8 Yes Dell Energy Smart C570A-SO 570 1 or 2 100-240VAC 81.5%@10%, 88.1%@20%, 92%@50%, 91.5%@100% 0.72@10%, 0.92@20%, 0.98@50%, 0.99@100% Microsoft Windows Server 2003 and 2008 Microsoft Windows Essential Business Server 2008 Microsoft Windows Small Business Server 2008 Red Hat Enterprise Linux 4 and 5 Citrix XenServer 5.x3 Vmware ESXi 3.53 SUSE Linux Enterprise Server 10 and 11 Microsoft Windows Server 2003 Mi ft Wi d E ti l B i S 2008
System Configurations
Configuration ID Processor Information Memory Information Internal Storage I/O Devices Power Supply Number and Redundancy Configuration Management Controller or Service Processor Installed? Other Hardware Features / Accessories
Minimum
1, Intel Xeon 5504 1 DIMM, 1 GB 1 HDD 4 onboard 1 GB NIC ports 1 Yes iDRAC6, SAS6/iR
Typical
2, Intel Xeon 5540 6 DIMMs, 2 GB each 4 HDDs minimum + 2 dual port 1 GB PCI-E NIC 2 Yes iDRAC6, PERC6/i
Maximum
2, Intel Xeon 5570 18 DIMMs, 8 GB each 6 HDDs minimum + 4 dual port 1 GB PCI-E NIC 2 Yes iDRAC6, PERC6/i
Power Data
Idle Category (1S and 2S only) ENERGY STAR Idle Power Allowance (1S and 2S only) Measured Idle Power (watts) Power at Full Load1 (watts) Benchmark / Method Used for Full Load Test Test Voltage and Frequency for Idle and Full Load Test Range of Total Estimated Energy Usage ** (kWh/year) Link to Detailed Power Calculator (if available)
Minimum
73 59.0 101.8
Typical
224 122.3 266.8 Sandra Dhrystone isse 4.2 115 V/60 Hz 2,143 to 4,674
Maximum
510 221.3 415.9
1,034 to 1,784
3,877 to 7,287
WWW.Dell.com/CALC
1. Full load power represents the sustained, average power at 100% load of the given workload, and does not necessarily represent the absolute peak power or the highest average, sustained power possible for other workloads. 2. Estimated kWh/year gives the absolute range of energy use you could expect from continuous operation (24x7x365) and ranges from 100% idle usage to 100% full-load operation. The calculation also includes typical data center overhead at a ratio of 1 watt of overhead to every 1 watt of IT load (corresponding to a PUE of 2.0). Closer approximations may be found by using established power calculators and specific information about the intended operating environment (e.g., average time at Idle, data center PUE, etc.).
Minimum
103.4 41 0.4
Typical
Sandra Dhrystone isse 4.2 269.3 122 0.45
Maximum
291.1 143 0.49
No No Yes No
Thermal Information
Minimum
147.0 6.6 (11.4 at nominal temp) 40 (1 cpu/4 fan when iDRAC-managed, else 108) 23
Typical
299.0 10.7 (19.3 at nominal temp) 50 (2 cpu/5 fan when iDRAC-managed, else 135) 28
Maximum
518.0 16.9 (21.6 at nominal temp) 55 (2 cpu/5 fan when iDRAC-managed, else 135) 43
Total Power Dissipation (watts) Delta Temperature at Exhaust at 35C Peak Temp. (C) Airflow at Maximum Fan Speed (CFM) at 35C Peak Temp. Airflow at Nominal Fan Speed (CFM) at 25C Nominal Temp.
1. ASHRAE Extended Environmental Envelope Final August 1, 2008. Thermal Guidelines for Data Processing Environments, ASHRAE, 2004, ISBN 1-931862-43-5. Peak temperature is defined as 35 C, Nominal Temperature is defined as 18 - 27 C