Académique Documents
Professionnel Documents
Culture Documents
EXPERIMENTAL FACILITIES
Validation
Physical model
Conceptual design
Model manufacturing
Validation
Validation
Mathematical model
Specific software Conceptual design structure Basic preliminary design TRAINING Detail design, production and technological data
Shipyard
Finished product
Structural analysis
Facilities
END USERS
ACTIVITIES :
Model Tests, Power Estimation, Full Scale Prediction and Theoretical and Experimental Investigations of Hydrodynamic Problems acc. to ITTC methods.
- Preliminary Project Investigations; - Propeller Design and Power Estimations; - Model Experiments and Flow Studies; - Advice and Assistance for improvements on the model tests results; - Trials and Service Measurements and Analyses.
10 9 7 6
8 4 m x 3 m x 170 m 12 m x 6 m x 285 m 1 2 3 3 4 5
1. Large towing tank 2. Towing carriage 3. Wave maker flap 4. Wave maker hydraulic power unit 5. Wave maker control desk 6. Wave absorber (Beach) 7. Trimming tank 8. Small towing tank 9. Instruments room 10. Model workshop
4mx3m 12 m x 6 m
WORKS
- INVESTIGATIONS, TESTS PERFORMED AND PREDICTIONS
ACTIVITIES
- Theoretical
and Experimental Studies, Analysis of Model Tests and Ship Maneuvering Trials; - Model Tests in Regular and Irregular Waves; - Calculation of Motions, Wave Exciting Forces on Floating/Fixed Bodies; - Model Test of all kinds of Offshore Constructions, Predictions of Sea Loads and Motions.
1 5
1. Office 2. Workshop 3. Instruments room 4. Wave generator remote control room 5. Transformer room 6. Maneuvering and offshore engineering tank 7. Beaches 8. Snake type wave generator 9. Hydraulic power unit
40m 6
40m
WORKS
INVESTIGATIONS, TESTS PERFORMED AND PREDICTIONS
Free Running Models equipped for Maneuvering Tests Maneuvering Tests with Free Running Remote Controlled Ship Model
Model Control Room for Radio Remote Control of Maneuvering Tests with Free Model
ACTIVITIES - Calculations and Model Tests for all kinds of Propellers ; - Theoretical and Experimental Investigations, including Effects on Propeller Efficiency (Pressure Pulses Induced by Propeller and Bearing Forces on Propeller Shaft) ;
The Cavitation Tunnel with four interchangeable measuring sections has been equipped by Kempf&Remmers - Germany. The propellers are tested both in simulated wake field with whirl mesh and behind ship dummy models.
WORKS
INVESTIGATIONS, TESTS PERFORMED AND PREDICTIONS
- Theoretical and experimental investigations of cavitation and problems caused by cavitation as influence on dynamic forces and propeller efficiency.
1-VA/VM
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
- Wake distribution measurements (simulation); - Influence of appendages upon the wake and cavitation; - Forces and moments on rudders, fins, hydrofoils and submerged bodies; - Pressure fluctuation measurements;
Dummy Model, Propeller and Pressure Transducers arrangement in 1450x700 mm measuring section
- Model tests of fixed and controlled pitch propellers, ducted propellers, non-cavitation propellers for special applications, high speed propellers, contra-rotating propellers, overlapping propellers, interlocking propellers, surface piercing propellers, water-jets, axial pumps. - Thrust-torque fluctuation measurements;
- Propellers characteristics in inclined flow; - Influence of free surface on propellers characteristics.
- Bow-thruster characteristics
0 0.3 0.4 0.5 0.6 0.7
ACTIVITES
The Wind Laboratory has a consultative function, offering technical advice in many practical applications.
- Streamline Observations; - Wind Pressure Distribution; - Aerodynamic Forces and Moments Measurement ; - Smoke Tests with Ship Funnels;
2,5 m
WORKS
INVESTIGATIONS, TESTS PERFORMED AND PREDICTIONS
A tracer-oil paints technique for the streamline flow on the aft part of the ship.
ACTIVITIES
- Manufacturing of Ship Models; - Manufacturing of Propeller Models; - Non-standard Equipment; - Manufacturing of Exhibition Ship Models.
Modelul utilizat de ITTC n cadrul unui exerciiu cooperativ propus de Resistance Committee
NON-STANDARD EQUIPMENT