Académique Documents
Professionnel Documents
Culture Documents
06
Sikafloor -94
Low Viscosity, Solvent Free Epoxy-primer
Product Description
Uses Two-component low viscosity primer, based on epoxy resin. As a primer and bonding agent on: Concrete, natural stone. Cementitious renderings, mortar and asbestos cement. Epoxy mortar. As a bonding agent for: Epoxy mortar screeds. Epoxy self-levelling floor toppings. Epoxy repair mortars. Good penetration. Can also be used at low temperatures up to (+10C). Excellent adhesive strength. Easy to apply. Yellowish, transparent 3 Kg and 10 kg pre-measured units (A+B). At least 12 months, if properly stored in- original unopened containers at temperatures between + 5C and +30C. 1.1 kg/I. To concrete: To steel (sandblasted):
Construction
Advantages
Product Data
Colour Packaging Shelf Life
Technical Data
Density Bond strength (DIN 53232) approx. 3 N/mm2 (concrete failure). approx. 12 N/mm2.
Application Details
Mixing Ratio Consumption Substrate Substrate preparation Comp. A: B = 2:1 by volume and by weight. One primer coat: 0.2 - 0.3 kg/m2, depending on substrate condition. Two primer coats, 2 (very porous substrates): 0.4 - 0.6 kg/m total consumption. Dry, clean, free of oil, grease, laitance or any loose particles. All laitance and structurally unsound layers must be removed mechanically. e.g. shot-blasting, cutting. Vacuum cleaning is necessary. Adhesive tensile strength at 2 least 1.5 N/mm .
Sikafloor -94
1/2
Application
Limitation
Mixing
Construction
Curing rate