Académique Documents
Professionnel Documents
Culture Documents
You received this message because a hardware device, its driver, or related software has caused a blue screen error.
This type of error means the computer has shut down abruptly to protect itself from potential data corruption or loss.
In this case, we were unable to detect the specific device or driver that caused the problem.
The following troubleshooting steps might prevent the blue screen error from recurring. Try them in the order given.
If one step does not solve the problem, then move on to the next one.
Steps to solve this problem
Download and install the latest updates and device drivers for your computer
Click Start, click Run, type msinfo32, and then click OK. Your computer manufacturer is listed as the
System Manufacturer in the right pane of the System Information window.
Many blue screen errors can be caused by computer viruses or other types of malicious software.
If you have an antivirus program installed on your computer, make sure it is up to date with the latest antivirus
definitions and perform a complete scan of your system. Check your antivirus product's website for information on
getting the latest updates.
If you do not have antivirus software installed on your computer, we recommend using a web-based scanner to check
your computer for malware. Many of the top antivirus software providers offer this service free of charge on their
websites.
To see a list of Microsoft and third-party providers of antispyware, anti-malware, and antivirus software, go online to
the following website:
Tip
Consider scanning your computer using more than one web-based antivirus scanner, even if you have an antivirus
program installed on your computer. This will help make sure that you are using the most up-to-date antivirus
definitions and allows you to benefit from the different strengths of each antivirus software manufacturer. If you do
run multiple antivirus products, make sure you run only one product at a time. Running multiple antivirus products
simultaneously can produce incorrect results.
You can help solve some computer problems and improve the performance of your computer by making sure that
your hard disk has no errors.
a. Click Start, and then click My Computer.
b. Right-click the hard disk drive that you want to check, and then click Properties.
c. Click the Tools tab, and then, under Error-checking, click Check Now.
To automatically repair problems with files and folders that the scan detects, select Automatically fix file
system errors. Otherwise, the disk check will report problems but not fix them.
To perform a thorough disk check, select Scan for and attempt recovery of bad sectors. This scan attempts
to find and repair physical errors on the hard disk itself, and it can take much longer to complete.
To check for both file errors and physical errors, select both Automatically fix file system errors and Scan
for and attempt recovery of bad sectors.
d. Click Start.
Depending upon the size of your hard disk, this might take several minutes or longer. For best results, don't
use your computer for any other tasks while it's checking for errors.
Note
If you select Automatically fix file system errors for a disk that is in use (for example, the partition that
contains Windows), you'll be prompted to reschedule the disk check for the next time you restart your
computer.
For more information, go online to read the following article:
Remove any new hardware or software to isolate the cause of the blue screen
If you received the blue screen error after adding a new hardware device or program, and downloading updates didn't
solve the problem, try removing the device or program and restarting Windows. If removing the new device or
program allows Windows to start without the error, contact the device or program's manufacturer to get product
updates or to learn about any known issues with the device or program.
If the blue screen error occurred after installing a system or program update, consider using the System Restore
feature to remove the changes. System Restore uses "restore points" that have been saved on your computer to return
your system to a point in time before the problem began. This won't fix the problem, but it can make your computer
work again.
Do one of the following:
If Windows doesn't start:
a. Restart the computer and, when the screen becomes blank during startup, repeatedly press F8 until the
Windows Advanced Options Menu displays.
b. Use your arrow keys to select Safe Mode with Command Prompt, and then press ENTER.
For more information about safe mode start up options, go online to read an article in the Microsoft
Knowledge Base:
Advanced troubleshooting
The following steps can help determine what is causing a blue screen error and provide additional options for solving
the problem. Try the above troubleshooting steps first before trying these advanced troubleshooting steps.
This section is intended for advanced computer users, such as software developers and network administrators. If you
are not comfortable with advanced troubleshooting procedures, we recommend that you perform these steps with
someone who is.
Step 1: Start Windows in safe mode
a. Restart the computer and, when the screen becomes blank during startup, repeatedly press F8 until the
Windows Advanced Options Menu displays.
b. Use your arrow keys to select Safe Mode, and then press ENTER.
For more information about safe mode start up options, go online to read the following article:
Event Viewer is an advanced tool that displays detailed information about significant events on your computer.
It can be helpful when troubleshooting problems and errors with Windows and other programs.
i. Click Start, click Run, type EVENTVWR, and then click OK.
ii. Click Application.
iii. Click View, and then click Filter.
iv. In the Event Source drop-down menu, click any one of the following: Save Dump, System Error, or
Windows Error Reporting.
v. In the Event ID field, type 1001, and then click OK.
vi. Review each event listed and write down the bugcheck code (for example, 0x000000D1 or
0x0000008E).
vii. Go to the next step to search the Internet for a solution.
b.
Use the information you collected in the previous step to search the Internet for more help. If you find
troubleshooting steps, make sure that they apply to your specific computer before you follow them.
i. Go online to search the Internet for specific bugcheck codes you found using Event Viewer. For
example, search for "0x000000D1" or "0x0000008E."
ii. Go online to search the Internet for the driver name. For example, search for "portcls.sys."
iii. Go online to search the Internet using different combinations of text, such as "Blue Screen" or "Stop
Error" along with the driver or device name. For example, you could search for "portcls.sys
bluescreen".
Step 3: Roll back or disable the problem driver
a. Start Device Manager. To do this, click Start, click Run, type devmgmt.msc, and then click OK.
b. Based on the driver and device information you obtained in Step 2 above, double-click the device that you
have determined might be causing the problem.
c. If you think the problem was caused by a recent update of the driver, click the Driver tab, and then click the
Roll Back Driver button. If the problem did not coincide with a recent updating of the driver, then click the
Disable button instead.
Step 4: Determine whether a third-party program is causing the problem
a. Click Start, click Run, type msconfig, and then click OK.
b. Click the General tab, click Selective Startup, clear the Load startup items check box, and then select the
Load System Services check box.
c. Click OK, and then restart the computer.
d. If Windows starts, go to Step 5. If Windows does not start, go to Step 7.
Step 5: Identify the conflicting program
Because of the number of programs that might be listed, we recommend that you use the following process of
elimination:
a. Click Start, click Run, type msconfig, and then click OK.
b. Click the Startup tab.
c. Select approximately half of the listed items, and then click OK.
d. Restart the computer.
e. If Windows does not start, restart Windows in safe mode.
f. Repeat this process until you have identified the program that is causing the problem.
g. Once you determine that a specific program is causing the problem, we recommend that you remove it if you
are not using it.
a. Click Start, click Control Panel, and then click Add or Remove Programs.
b. Click Change or Remove Programs, click the program you want to remove, and then click
Change/Remove or Remove.
Note
If the program that you want to uninstall isn't listed, it might not have been written for this version of
Windows. To uninstall the program, check the information that came with the program.
h. If you do not want to remove the program, contact the software manufacturer for a solution to the problem.
Step 6: Disable all third-party services
Disable all third-party services to find out whether the problem is being caused by one of them.
Warning
The following procedure describes how to turn off third-party services. Be careful not to disable Microsoft services,
because doing so will turn off System Restore and cause you to lose all system restore points.
a. Click Start, click Run, type msconfig, and then click OK.
b. Click the Services tab, and then click the Hide all Microsoft services check box to filter the list to third-party
services only.
c. Click Disable all to disable the listed third-party services.
d. Restart the computer and check to see if the problem has gone away. If it has, you know that one of the
disabled third-party services is causing the problem. Go to step 7 to identify which service is causing the
problem.
Step 7: Locate and disable the third-party service causing the problem
Warning
The following procedure describes how to turn off third-party services. Be careful not to disable Microsoft services,
because doing so will turn off System Restore and cause you to lose all system restore points.
Because of the number of services that might be listed, we recommend that you use the following process of
elimination:
a. Click Start, click Run, type msconfig, and then click OK.
b. Click the Services tab, and then click the Hide all Microsoft services check box to filter the list to third-party
services only.
c. Disable approximately half the services on the list, and then click OK.
d. Restart the computer in normal mode.
○ If Windows starts, then the problem service is among those you disabled. Repeat the process of
enabling services in msconfig and restarting Windows until you determine which one causes Windows
to not start in normal mode (this is the service that is causing the problem).
○ If Windows does not start, then the problem service is among those you left enabled. Repeat the
process of disabling services and restarting Windows until you determine which one causes Windows
to start in normal mode (this is the service that is causing the problem).
e. If you have determined which service is causing the problem, we recommend that you disable it and contact
the service's manufacturer for information on how to solve the problem. Also, make sure you re-enable any of
the other services you disabled for diagnostic purposes.
© 2006 Microsoft Corporation. All rights reserved. Terms of use | Accessibility | Privacy
Statement | Trademarks