Académique Documents
Professionnel Documents
Culture Documents
50108_01 16.06.08
Document Information
2008 Tellabs. All rights reserved. This Tellabs manual is owned by Tellabs or its licensors and protected by U.S. and international copyright laws, conventions and treaties. Your right to use this manual is subject to limitations and restrictions imposed by applicable licenses and copyright laws. Unauthorized reproduction, modication, distribution, display or other use of this manual may result in criminal and civil penalties. The following trademarks and service marks are owned by Tellabs Operations, Inc. or its afliates in the United States and/or other countries: TELLABS , TELLABS logo, TELLABS and T symbol , and T symbol . Any other company or product names may be trademarks of their respective companies. The specications and information regarding the products in this manual are subject to change without notice. All statements, information, and recommendations in this manual are believed to be accurate but are presented without warranty of any kind, express or implied. Users must take full responsibility for their application of any products. Adobe Reader are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries. The Tellabs 8600 Managed Edge System includes software licensed under the Info-ZIP License (http://www.infozip.org/license.html).
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
2
Document Information
Control and DC Power Card Embedded Software First Customer Shipment Interface Module Concentrator is the line card baseboard and it can be equipped with one or two IFMs. Two variants available: IFC1-A and IFC1-B. Interface Module. A specic term of the module which can be placed on the line card and which consists of the physical interfaces. Modular Application Platform, Tellabs 8600 ESW platform Network Element
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
3
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
4
Table of Contents
Table of Contents
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
5
Objectives
This manual consists of the boot and mini applications software of Tellabs 8620 access switch, Tellabs 8630 access switch, Tellabs 8660 edge switch and Tellabs 8605 access switch. The latest detailed description of the upgrade procedure is presented in chapter 1 Installation Notes. At the beginning of the manual you can nd the Tellabs 8620 access switch, Tellabs 8630 access switch and Tellabs 8660 edge switch related embedded software interrelation tables for: boot and mini-applications software Chapters 2 Mini-Application Software and 3 Boot Software have the following structure: The chapter heading gives the network element related embedded software. Some general information of the network element and embedded software is given. The chapter is divided in subchapters according to different versions. The latest version is always described rst. Under every embedded software version there are the following items; enhancements, dependencies, restrictions and bugs. The following conventions are used in the release notes. The text No known bugs means that there are no bugs known to Tellabs Oy. The text No known restrictions under version information means that there are no restrictions when using this version of software or hardware.
Audience
This manual is designed for Tellabs 8600 network element installation personnel and system specialists when planning or maintaining the network, updating software or installing network elements.
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
6
Related Documentation
Tellabs 8600 Managed Edge System Application Embedded Software Release Notes1 Tellabs 8605 Access Switch Application Embedded Software Release Notes1 Consists of the embedded software release notes of Tellabs 8620 access switch, Tellabs 8630 access switch and Tellabs 8660 edge switch. Consists of the embedded software release notes of Tellabs 8605 access switch.
Rows marked in bold indicate the SW products currently in production. Rows marked in italics indicate the fast lane or FCS SW products that are not generally available.
1Refer
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
7
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes 50108_01 2008 Tellabs.
Tellabs 8600 Boot and Mini-Applications Software Basic Data MiniApplication GMZ2711 GMZ2711 GMZ2711 GMZ2711 GMZ2711 GMZ2711 GMZ2711 GMZ2711 GMZ2711 GMZ2702 GMZ2702 GMZ2702 GMZ2702 GMZ2702 GMZ2702 GMZ2702 GMZ2702 Version 2.8.191 2.0.104 2.0.101 2.0.100 2.0.0 1.17.15 2.8.191 2.0.104 2.0.101 2.8.191 2.0.104 2.0.101 2.0.100 2.0.0 1.17.15 2.8.191 2.0.104 Tellabs 8600 NEs/cards IFC1-A IFC1-A IFC1-A IFC1-A IFC1-A IFC1-A IFC1-B IFC1-B IFC1-B CDC1-A CDC1-A CDC1-A CDC1-A CDC1-A CDC1-A CDC1-B CDC1-B Baseboard LBA2024 LBA2024 LBA2024 LBA2024 LBA2024 LBA2024 LBA2225 LBA2225 LBA2225 CBB2026 CBB2026 CBB2026 CBB2026 CBB2026 CBB2026 CBB2224 CBB2224 HW Version 1.0 or higher 1.0 or higher 1.0 or higher 1.0 or higher 1.0 or higher 1.0 or higher 1.0 or higher 1.0 or higher 1.0 or higher 1.1 or higher 1.1 or higher 1.1 or higher 1.1 or higher 1.1 or higher 1.1 or higher 1.0 or higher 1.0 or higher Boot SW GMZ2710 GMZ2710 GMZ2710 GMZ2710 GMZ2710 GMZ2710 GMZ2710 GMZ2710 GMZ2710 GMZ2700 GMZ2700 GMZ2700 GMZ2700 GMZ2700 GMZ2700 GMZ2700 GMZ2700 Version 3.4.0 3.3.7 3.1 3.0 3.0 3.0 3.4.0 3.3.7 3.1 3.4.0 3.3.7 3.1 3.0 3.0 3.0 3.4.0 3.3.7 Application Version Any 2.8.212 or lower 2.8.212 or lower 2.8.212 or lower 2.8.212 or lower 2.8.212 or lower Any 2.8.212 or lower 2.8.212 or lower Any 2.8.212 or lower 2.8.212 or lower 2.8.212 or lower 2.8.212 or lower 2.8.212 or lower Any 2.8.212 or lower Other Data
50108_01 2008 Tellabs. Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
9
Basic Data MiniApplication GMZ2702 GMZ2716 GMZ2716 GMZ2716 GMZ2716 GMZ2716 GMZ2728 Version 2.0.101 2.8.191 2.0.104 2.0.101 2.0.0 1.17.15 0.40.2 Tellabs 8600 NEs/cards CDC1-B 8620 8620 8620 8620 8620 8605 Baseboard CBB2224 SBB2030 SBB2030 SBB2030 SBB2030 SBB2030 SBB2230 HW Version 1.0 or higher 1.0 or higher 1.0 or higher 1.0 or higher 1.0 or higher 1.0 or higher 1.0 or higher Boot SW GMZ2700 GMZ2715 GMZ2715 GMZ2715 GMZ2715 GMZ2715 GMZ2727 Version 3.1 3.4.0 3.3.7 3.1 3.0 3.0 1.1.0 Application Version 2.8.212 or lower Any 2.8.212 or lower 2.8.212 or lower 2.8.212 or lower 2.8.212 or lower Any
Other Data
1 Installation Notes
1 Installation Notes
1.1 Boot and Mini-Application Update for Application SW Version 2.8.213 and Higher
The following chapters describe how to update the boot and mini-application software version 2.8.213 or higher. There is only one le which includes both the boot and mini-application software, refer to the instructions below describing the update procedure.
The update procedure is mandatory for Tellabs 8630 access switch and Tellabs 8660 edge switch, and only optional in the case of Tellabs 8605 access switch and Tellabs 8620 access switch.
The installation of boot and mini-application software is only possible via the CLI interface (not using Tellabs 8000 network manager).
1.1.1
Mandatory Update Procedure for Tellabs 8630 Access Switch and Tellabs 8660 Edge Switch
Prior to installing the application software version 2.8.213 or higher in Tellabs 8630 access switch and Tellabs 8660 edge switch it is mandatory that the boot and mini-application software of the CDC and IFC are rst updated, boot software to version 3.4.0 or higher and mini-application to version 2.8.191 or higher. These versions add support for a larger amount of conguration les in the le system. A large amount of les is to be created by the application software version 2.8.213 or higher.
If the update is not done correctly, it may cause trafc breaks due to an innite reset loop on such a card when version 2.8.213 or higher software is booted for the rst time. The only way to recover from this situation is to send such a card to the Tellabs repair service.
pkg_8660_boot_2.8.191 software package is common for both Tellabs 8630 access switch and Tellabs 8660 edge switch.
Step 1 Step 2
Load boot and mini-application package pkg_8660_boot_2.8.191 to the directory /ash/appl-sw/slot14 using FTP. Use command "boot system slot 14 ash: pkg_8660_boot_2.8.191 to activate the boot and mini-application.
50108_01 2008 Tellabs.
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
10
1 Installation Notes
Do not switch the power off during the operation as it may cause a situation in which there is no valid boot software at all.
After the installation is completed it is important to verify that the new boot and mini-application software versions have been installed, using the CLI command show sw-version under PEXEC conguration mode. 7: boot SW gmz2710-3.4.0 3.4.0 7: mini-application SW gmz2711_2.8.191 2.8.191 Backup. ... 14: boot SW gmz2700-3.4.0 3.4.0 14: mini-application SW gmz2702_2.8.191 2.8.191 Backup. Check for each slot that the boot software version is 3.4.0 or higher and the mini-application software version is 2.8.191 or higher. If the software versions are correct, the application software version 2.8.213 or higher can be installed to the network element using CLI or Tellabs 8000 network manager according to the standard procedure. If the software versions are incorrect, repeat from Step 1 the boot and mini-application installation sequence without rebooting the cards. Note: There is no need to do a separate boot in order to do the nal activation of the boot and mini-application software.
1.1.2
Update Procedure for Tellabs 8620 Access Switch and Tellabs 8605 Access Switch
It is optional to update the boot and mini-application in the case of Tellabs 8620 access switch and Tellabs 8605 access switch before installing the application software version 2.8.213 or higher. However, if you decide to update the boot and mini-application, do it according to the following procedure:
Step 1
Load boot and mini-application package to the directory /ash/appl-sw using FTP. pkg_8620_boot_2.8.191 for Tellabs 8620 access switch. pkg_8605_boot_x.y.z for Tellabs 8605 access switch.
Step 2
Use command "boot system ash: <package_name> to activate the boot and mini-application.
Do not switch the power off during the operation as it may cause a situation in which there is no valid boot software at all.
After the installation is completed it is important to verify that the new boot and mini-application software versions have been installed, using the CLI command show sw-version
50108_01 2008 Tellabs. Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
11
1 Installation Notes
under PEXEC conguration mode. Tellabs 8620 access switch: 1: 1: boot SW gmz2715-3.4.0 3.4.0 mini-application SW gmz2716_2.8.191 2.8.191 Backup.
Tellabs 8605 access switch: 1: 1: boot SW gmz2727-01.01.000 1.1.0 mini-application SW gmz2728_0.40.2 0.40.2 Backup.
If the software versions are correct, the application software version 2.8.213 or higher can be installed to the network element using CLI or Tellabs 8000 network manager according to the standard procedure. If the software versions are incorrect, repeat from Step 1 the boot and mini-application installation sequence without rebooting the cards. Note: There is no need to do a separate boot in order to do the nal activation of the boot and mini-application software.
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
12
2 Mini-Application Software
2 Mini-Application Software
2.1 8620: GMZ2716 Mini-Application Software
The mini-application software GMZ2716 is used on SBB2030 card in Tellabs 8620 access switch.
2.1.1
Version 2.8.191
Enhancements Compared to 2.0.104 The number of supported ash le system les is increased. Note that this version is required in order to use ESW version 2.8.213 or higher. Dependencies Based on MAP version 2.8.190. Requires Tellabs 8600 network manager release 1.0 or higher. Restrictions No known restrictions Bugs No known bugs
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
13
2 Mini-Application Software
2.2
2.2.1
Version 2.8.191
Enhancements Compared to 2.0.104 The number of supported ash le system les is increased. Note that this version is required in order to use ESW version 2.8.213 or higher. Dependencies Based on MAP version 2.8.190. Requires Tellabs 8600 network manager release 1.0 or higher. Restrictions No known restrictions Bugs No known bugs
2.3
2.3.1
Version 2.8.191
Enhancements Compared to 2.0.104 The number of supported ash le system les is increased. Note that this version is required in order to use ESW version 2.8.213 or higher. Dependencies Based on MAP version 2.8.190. Requires Tellabs 8600 network manager release 1.0 or higher. Restrictions No known restrictions Bugs No known bugs
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
14
2 Mini-Application Software
2.4
2.4.1
Version 0.40.2
Enhancements Compared to 2.0.101 Dependencies Based on MAP version 2.8.0. Requires Tellabs 8000 network manager release R16 or higher. Restrictions No known restrictions. Bugs No known bugs.
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
15
3 Boot Software
3 Boot Software
3.1 8620: GMZ2715 Boot Software
The boot software GMZ2715 is used on SBB2030 card in Tellabs 8620 access switch.
3.1.1
Version 3.4.0
Enhancements Compared to 3.3.7 The number of supported ash le system les is increased. Note that this version is required in order to use ESW version 2.8.213 or higher. Dependencies Based on MAP version 2.5.3. Requires Tellabs 8600 network manager release 1.0 or higher. Restrictions No known restrictions Bugs No known bugs
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
16
3 Boot Software
3.2
3.2.1
Version 3.4.0
Enhancements Compared to 3.3.7 The number of supported ash le system les is increased. Note that this version is required in order to use ESW version 2.8.213 or higher. Dependencies Based on MAP version 2.5.3. Requires Tellabs 8600 network manager release 1.0 or higher. Restrictions No known restrictions Bugs No known bugs
3.3
3.3.1
Version 3.4.0
Enhancements Compared to 3.3.7 The number of supported ash le system les is increased. Note that this version is required in order to use ESW version 2.8.213 or higher. Dependencies Based on MAP version 2.5.3. Requires Tellabs 8600 network manager release 1.0. Restrictions No known restrictions Bugs No known bugs
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
17
3 Boot Software
3.4
3.4.1
Version 1.1.0
Enhancements Compared to 1.0.0 Support for high temperatures via lower and more even DDR RAM refresh interval Support for LZMA uncompression Dependencies Based on MAP version 2.8.0. Requires Tellabs 8000 network manager release R16A or higher. Restrictions No known restrictions. Bugs No known bugs.
3.4.2
Version 1.0.0
Enhancements Compared to 2.0.101 Dependencies Based on MAP version 2.8.0. Requires Tellabs 8000 network manager release R16 or higher. Restrictions No known restrictions. Bugs No known bugs.
Tellabs 8600 Managed Edge System Boot and Mini-Applications Embedded Software Release Notes
18