Vous êtes sur la page 1sur 2

4-170-642-12(1)

Remote Commander
RM-VZ220
2010 Sony Corporation Printed in China
Operating Instructions
Manual de instrucciones (parte posterior)
English
For the Customers in the U.S.A.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different fromthat to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
Setting Up the RM-VZ220
The RM-VZ220 is preset at the factory to operate Sony brand video devices
set to any of the Device Select buttons (see the table below).
To use with non-Sony devices, or Sony devices that are not preset at the
factory, set the manufacturers code for each device.
Devices Button Factory setting*
TV TV Sony TV (00810)
TV, Cable set top box, Satellite
receiver, IPTV, DVD player, DVD
recorder, Blu-ray Disc player, DVR
(digital video recorder), PVR
(personal video recorder), VCR,
DVD Home Theater
CBL (SAT) Cable set top box (non-
Sony) (51376)
VCR Sony VCR (60032)
DVD Sony DVD player
(11033)
* The five-digit code is the preset manufacturers code.
Note
Only a TV can be assigned to the TV Device Select button. You can assign any device to
the other Device Select buttons.
Installing the batteries
Slide open the battery compartment and insert two size AA (R6) dry
batteries (not supplied).
Insert the batteries (negative end first) through the guide clamp within each
compartment as shown below.
1 2
Battery life
Under normal conditions, size AA (LR6) alkaline batteries will last up to one
year. If the RM-VZ220 does not operate properly, the batteries might be
drained. Replace both batteries with new ones.
Notes
Replace the batteries within 2 minutes after removing them, and do not press any
button when replacing the batteries. Otherwise, your code settings may be cleared.
Do not use an old battery with a new one, or mix different types of batteries together.
If the electrolyte inside the battery should leak, wipe the contaminated area of the
battery compartment with a cloth and replace the old batteries with new ones. To
prevent electrolyte fromleaking, remove the batteries when you plan not to use the
RM-VZ220 for a long period of time.
Specifications
Operating distance Approx. 11 m(36 ft) (varies depending on devices of
different manufacturers)
Power requirements Two size AA (R6) dry batteries (not supplied)
Battery life Approx. 1 year when using size AA (LR6) alkaline batteries
(varies depending on frequency of button use - up to approx.
300 times per day.)
Dimensions Approx. 53 213 27 mm(2 1/8 8 1/2 1 1/8 in.)
(w/h/d)
Mass Approx. 100 g (3.5 oz) (not including batteries)
Design and specifications are subject to change without notice.
Troubleshooting
If you have problems setting up or using the RM-VZ220:
Carefully performthe setup procedure of Startup Guide. If the RM-VZ220 does not
work, try repeating the setup procedure using another manufacturers code (if listed
for your device). If you still cannot operate the RM-VZ220, try the Search function
(see Searching for the correct code).
Aimthe RM-VZ220 directly at the device.
Remove any obstacles in the path between the RM-VZ220 and the device.
Make sure you have pressed the correct Device Select button.
Check that the device has infrared remote capability. For example, if your device did
not come with a remote control, it probably is not capable of being controlled by the
RM-VZ220.
The batteries are weak, or not inserted correctly. Replace themwith new ones or insert
themcorrectly.
For the customers in the U.S.A.
Customer Support Information
After you have read through this manual, if you still cannot get the RM-VZ220 to work
properly, call the Sony Customer Support Helpline at
1-800-822-2217.
Startup Guide
This guide shows you howto set up and use the RM-VZ220 to operate your devices.
If your Sony device has already been preset, see Operate the device.
Set the manufacturers code
Example: To set up a Philips TV
1 Find the manufacturers code in Manufacturers Code List.
RM-VZ220_U [US,ES] 4-170-642-12(1) RM-VZ220_U [US,ES] 4-170-642-12(1)
4-170-642-12(1)
Remote Commander RM-VZ220 2010 Sony Corporation Printed in China
Operating Instructions Manual de instrucciones (parte posterior)
English
For the Customers in the U.S.A. WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Setting Up the RM-VZ220 The RM-VZ220 is preset at the factory to operate Sony brand video devices set to any of the Device Select buttons (see the table below). To use with non-Sony devices, or Sony devices that are not preset at the factory, set the manufacturers code for each device. Devices Button Factory setting* TV TV Sony TV (00810) TV, Cable set top box, Satellite receiver, IPTV, DVD player, DVD recorder, Blu-ray Disc player, DVR (digital video recorder), PVR (personal video recorder), VCR, DVD Home Theater
CBL (SAT) Cable set top box (non- Sony) (51376) VCR Sony VCR (60032) DVD Sony DVD player (11033) * The five-digit code is the preset manufacturers code. Note Only a TV can be assigned to the TV Device Select button. You can assign any device to the other Device Select buttons.
Installing the batteries Slide open the battery compartment and insert two size AA (R6) dry batteries (not supplied). Insert the batteries (negative end first) through the guide clamp within each compartment as shown below. 1 2
Battery life Under normal conditions, size AA (LR6) alkaline batteries will last up to one year. If the RM-VZ220 does not operate properly, the batteries might be drained. Replace both batteries with new ones. Notes Replace the batteries within 2 minutes after removing them, and do not press any button when replacing the batteries. Otherwise, your code settings may be cleared. Do not use an old battery with a new one, or mix different types of batteries together. If the electrolyte inside the battery should leak, wipe the contaminated area of the battery compartment with a cloth and replace the old batteries with new ones. To prevent electrolyte fromleaking, remove the batteries when you plan not to use the RM-VZ220 for a long period of time.
Specifications Operating distance Approx. 11 m(36 ft) (varies depending on devices of different manufacturers) Power requirements Two size AA (R6) dry batteries (not supplied) Battery life Approx. 1 year when using size AA (LR6) alkaline batteries (varies depending on frequency of button use - up to approx. 300 times per day.) Dimensions Approx. 53 213 27 mm(2 1/8 8 1/2 1 1/8 in.) (w/h/d) Mass Approx. 100 g (3.5 oz) (not including batteries) Design and specifications are subject to change without notice.
Troubleshooting If you have problems setting up or using the RM-VZ220: Carefully performthe setup procedure of Startup Guide. If the RM-VZ220 does not work, try repeating the setup procedure using another manufacturers code (if listed for your device). If you still cannot operate the RM-VZ220, try the Search function (see Searching for the correct code). Aimthe RM-VZ220 directly at the device. Remove any obstacles in the path between the RM-VZ220 and the device. Make sure you have pressed the correct Device Select button. Check that the device has infrared remote capability. For example, if your device did not come with a remote control, it probably is not capable of being controlled by the RM-VZ220. The batteries are weak, or not inserted correctly. Replace themwith new ones or insert them correctly. For the customers in the U.S.A. Customer Support Information After you have read through this manual, if you still cannot get the RM-VZ220 to work properly, call the Sony Customer Support Helpline at 1-800-822-2217.
Startup Guide This guide shows you howto set up and use the RM-VZ220 to operate your devices. If your Sony device has already been preset, see Operate the device. Set the manufacturers code Example: To set up a Philips TV 1 Find the manufacturers code in Manufacturers Code List. Manufacturers Code List / Lista de cdigos del fabricante English The following tables show brand names (Brand) and their corresponding code numbers (Code No.). 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 2 Enter the manufacturers code. The SET indicator flashes three times and turns off. Espaol La siguiente tabla muestra los nombres de las marcas (Brand) y el nmero de cdigo correspondiente (Code No.). 1 Presione y mantenga presionado el botn SET durante ms de 3 segundos. Se encender la luz indicadora SET. Mientras tiene presionado el botn SET, presione el botn de seleccin de dispositivo deseado y luego suelte ambos botones. 2 Ingrese el cdigo del fabricante. El indicador SET parpadear tres veces y se apagar. Brand Code No. Sony 00810, 00000 Acer 01339 Action 00650 Admiral 00463 Akai 00812, 01675, 00702, 02232 Akira 01733 AOC 01365, 01589 Apex Digital 00748 Aventura 00171 Bell & Howell 00154 BPL 01543 Broksonic 00463 Carver 00054 Celebrity 00000 Coby 02306, 02345, 02348 Commercial Solutions 01447 Crosley 00054 Curtis 02352 Curtis Mathes 00054, 00154, 00702, 01661 Daewoo 01661 Digital Lifestyles 01765 Durabrand 00463, 00171 Dynex 01463, 01810, 02049 Electroband 00000 Electrograph 01755 Electrohome 00463 Elektra 01661 Element 01687 Emerson 01864, 00154, 00463, 00171, 01661, 01394 Emprex 01765 Envision 01365, 01589 ESA 00812, 00171 Fisher 00154 Funai 00171 Gateway 01755, 01756 GE 01447, 00051, 02359 GFM 00171 Haier 01748, 01749, 02309, 02449 Harman/Kardon 00054 Hisense 00748, 01314, 02098 Hitachi 01643, 02215, 02433 iLo 01684 Infinity 00054 Insignia 01564, 00171, 02049 JBL 00054 JCB 00000 JVC 00731, 01253, 01601, 01774 KDS 01687 Kolin 01331 LG 01423, 02358 LXI 00054, 00154, 00156 MAG 01687 Magnavox 01454, 01866, 00054, 01254, 01365, 02372 Marantz 00054 Matsushita 00650 Maxent 01755 Memorex 00154, 00463, 00150 MGA 00150
Brand Code No. Midland 00051 Mitsubishi 01250, 00150, 00836 NAD 00156 NEC 01797 NetTV 01755 Norcent 00748, 01365, 01589 Olevia 01610, 01144, 01331 Onida 01253, 02396 Optimus 00154, 00650 Orion 00463, 01463 Panasonic 01480, 00051, 00650 PARK 02104 Penney 00156, 00051 Petters 01523 Philco 00054 Philips 01454, 00054, 00690, 01744, 02372 Pioneer 01457, 01260 Polaroid 01523, 01276, 01314, 01687 Portland 01661 Prism 00051 Proscan 01447, 02147, 02256 Proview 01687 Quasar 00051, 00650 RadioShack 00154 RCA 01447, 01781, 02187, 02247, 02403, 02429, 02434 Realistic 00154 Sampo 01755 Samsung 00812, 00702 Sansui 00463 Sanyo 00154, 01142 Sceptre 01360, 01599 Scott 01711 Sears 00054, 00154, 00156, 00171 Sharp 00818 Spectroniq 01687 Squareview 00171 Superscan 00864 Supreme 00000 SVA 00748 Sylvania 01864, 00054, 00171, 01314, 01394 Symphonic 00171 Syntax 01610, 01144, 01331 Tatung 01756 TCL 02403, 02429 Technics 00051 Techwood 00051 Teknika 00054, 00150 Telefunken 00702 Toshiba 01524, 00154, 00156, 00650 TVS 00463 Venturer 01865 Videocon 01540, 01541, 02436 Vidikron 00054 Viewsonic 01755, 00864, 00885, 01627, 01742 Viore 01684, 02104, 02352 Vizio 01758, 00864, 00885, 01756 VU 02098
TV/ TV
Brand Code No. Wards 00054 Waycon 00156 Westinghouse 01712, 00885, 01577 White Westinghouse 00463, 01661 Wyse 01365 Zenith 00463, 01661 Brand Code No. Sony 11633, 10533, 10864, 11033, 11070, 11431, 11516 Accurian 10675 Akai 10695 Allegro 10869 Apex Digital 10672, 11056 Bel Canto Design 11571 Broksonic 10695 CineVision 10869 Citizen 10695 CyberHome 11024 Daewoo 10869 Denon 10490, 11634, 12258 Disney 10675, 11270 Emerson 10591, 10675 Enterprise 10591 Funai 10675 GE 10522 GFM 10675 Go Video 10744, 10741, 10869, 11044, 11075 GoldStar 10741 Harman/Kardon 11229 Hitachi 10573, 10664 Hiteker 10672 Insignia 10675, 12428, 12596 Integra 11769, 10627, 12147 JVC 10623, 10867, 11164 Kenwood 10490 LG 10591, 10741, 10869 Magnavox 10503, 10539, 10646, 10675, 11354 Marantz 10539, 12414, 12432 Memorex 10695, 11270, 12213 Microsoft 10522, 12083 Mitsubishi 11521 NAD 10741, 12572 Olevia 12331
Brand Code No. Onkyo 10503, 11769, 10627, 11627, 12147 Oppo 10575, 12545 Panasonic 10490, 11579, 11641 Philco 10675 Philips 10503, 10539, 12056, 12084, 10646, 10675, 11267, 11354, 12434 Pioneer 10142, 10631, 11571, 12442 Polk Audio 10539 Presidian 10675 Proscan 10522 RCA 10522, 11769, 10822, 12213, 12587, 12592, 12594 Rio 10869 Rotel 10623 Samsung 10490, 10573, 10199, 11044, 11075, 12329, 12489 Sansui 10695 Sanyo 10695 Sharp 10630, 10675, 12250 Shinsonic 10533 Sonic Blue 10869 Sylvania 10675 Symphonic 10675 TCL 12587 Technics 10490 Tivo 11503 Toshiba 10503, 11769, 10695, 11154, 11503, 12006, 12277 Urban Concepts 10503 Viore 12553 Vizio 12563 Vtrek 12587 Xbox 10522, 12083 Yamaha 10490, 10539, 10497, 10817, 12298 Zenith 10503, 10591, 10741, 10869
DVDplayer / Reproductor de DVD
Brand Code No. Sony 11033, 11070, 11431 Accurian 10675 Apex Digital 11056 Funai 10675 Go Video 10741 JVC 11164 LG 10741 Magnavox 10646, 10675 Panasonic 10490, 11579 Brand Code No. Philips 10646 Pioneer 10631 RCA 10522 Samsung 10490 Sharp 10675 Sylvania 10675 Toshiba 12277 Zenith 10741 DVDrecorder / Grabadora de DVD Blu-ray Disc/HD-DVDplayer/ Reproductor de Blu-ray Disc/HD-DVD Brand Code No. Sony 11516 Denon 12258 Insignia 10675, 12428, 12596 Integra 11769, 12147 LG 10741 Magnavox 10675 Marantz 12414, 12432 Microsoft 12083 NAD 12572 Olevia 12331 Onkyo 11769, 12147 Oppo 12545 Brand Code No. Panasonic 11641 Philips 12084, 12434 Pioneer 10142, 12442 RCA 11769 Samsung 10199 Sharp 12250 Sylvania 10675 Toshiba 11769 Viore 12553 Vizio 12563 Xbox 12083 Yamaha 12298
Brand Code No. Sony 00810, 00000 Acer 01339 Action 00650 Brand Code No. Midland 00051 Mitsubishi 01250, 00150, 00836 NAD 00156
TV/ TV
BPL 01543 Broksonic 00463 Carver 00054 Celebrity 00000 Coby 02306, 02345, 02348 Commercial Solutions 01447 Crosley 00054 Curtis 02352 Curtis Mathes 00054, 00154, 00702, 01661 Daewoo 01661 Digital Lifestyles 01765 Durabrand 00463, 00171
Panasonic 01480, 00051, 00650 PARK 02104 Penney 00156, 00051 Petters 01523 Philco 00054 Philips 01454, 00054, 00690, 01744, 02372 Pioneer 01457, 01260 Polaroid 01523, 01276, 01314, 01687 Portland 01661 Prism 00051 Proscan 01447, 02147, 02256 Proview 01687 If your device is not listed, try the Search function (see Searching for the correct code). 2 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 3 Enter the manufacturers code (01454). The SET indicator flashes three times and turns off.
Operate the device
1 Aim the RM-VZ220 directly at the device. 2 Press the Device Select button for the device you want to operate.
3 Press POWER to turn on the device.
4 Press buttons on the RM-VZ220 to check that they function. See Remote Button Descriptions for the functions of buttons for each device.
If the RM-VZ220 does not seemto be working Check that you have set the correct manufacturers code. Try repeating the setup procedure using another manufacturers code (if listed for your device). If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see Searching for the correct code).
Notes If the setting is incomplete, the SET indicator flashes once and the indicators turn off. Start again fromthe beginning. If no operations are performed for 10 seconds while setting, the setting will be canceled, and must be restarted. To cancel the process, press SET any time. The SET indicator turns off.
SET POWER Device Select buttons
Number buttons
The SET indicator lights up.
Searching for the correct code You can set the manufacturers code using the Search function. 1 Power on the device with its power switch. 2 Aimthe RM-VZ220 at the device you want to set. 3 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 4 Enter 9 - 2 - 2 using the number buttons. The SET indicator flashes three times. 5 Press and hold to start searching. When the device turns off, release the button. If you overshoot the required code, you can search for the next or previous code using the or ~button. 6 Press . The SET indicator flashes three times and turns off. 7 Check if the code number works correctly (see Remote Button Descriptions). If you still cannot operate the device, repeat steps to search for another code that works for most functions of your device. Checking the manufacturers code you have set 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 2 Enter 9 - 3 - 3 using the number buttons. The SET indicator flashes three times. 3 Press . 4 When the SET indicator starts flashing, count the number of flashes. Short flash(es) indicate which digit (first, second, etc.), followed by long flash(es) to indicate the digit number (i.e., 2 long flashes represent the number 2). 0 is indicated by rapid flashing. Determine the 5-digit code number this way. To recheck, press . 5 Press SET to finish. Clearing the automatic power-on control (Sony devices only) The Device Select buttons are preset to automatically turn on a device when pressed. To cancel the function: 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press , then release both buttons. 2 Enter 9 - 7 - 7 using the number buttons. The SET indicator flashes three times. 3 Press the desired Device Select button. The SET indicator flashes three times and turns off. To set the function again, performthe same procedure above. Restoring the factory settings You can clear all the settings and reset the RM-VZ220 to its factory settings. 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press , then release both buttons. 2 Enter 9 - 0 - 0 using the number buttons. The SET indicator flashes three times. To cancel, press any button except . 3 Press . The SET indicator flashes three times and turns off.
Remote Button Descriptions
General _ SET: Press to set up the RM-VZ220. The indicator lights or flashes while setting. _Device Select buttons: Press to select the device to operate. _GUIDE: Displays the programguide (EPG). +//+/+/ : Moves the cursor to select a menu item/enters the selected item. _RETURN: Returns to the previous display/exits the menu. jVOL +/: Turns the volume up/down. jPOWER: Turns the selected device on and off. gMUTING: Mutes the volume. Press again to turn muting off. gSLEEP: Enables the Sleep function (when available). The number 5, CH+, and buttons each have a tactile dot for ease of use. The GUIDE and RETURN buttons do not work for a VCR. Note on theVOL+/ and MUTINGbuttons When a TV or other video device is selected, the TVs volume is controlled. When a DVD Home Theater is selected, its volume can be controlled. TV m: VIDEO 1 input : VIDEO 2 input : HDMI input : RGB input ~: (PIP INPUT) Changes the input mode of the window picture. : (PIP) Turns the window picture on and off. : (PIP MOVE) Moves the location of the window picture. H: (PIP STILL) Freezes the window picture. N: (PIP SWAP) Switches between main and window picture. _A: Red button B: Green button C: Yellow button D: Blue button jLIST: (CAPTION) Displays closed captioning.
jMENU: Calls up the menu display. _INPUT: Changes the input mode. jjg1 9, 0, ENTER, (dot): Changes the channel. For example, to change to channel 5, press 0 and 5 (or, press 5 and ENTER). jPAGE +/: (PIP CH+/) Changes the channel up/down in the window picture. jFAVORITES: Enables the Favorite function. jINFO: Displays program information. gOPTIONS: Displays the options menu. gRECALL: Selects the channel previously selected. gCH +/: Switches the channel up/ down.
Cable set top box/IPTV m: Proceeds to the previous location. : Briefly replays the scene (Flash ). : Briefly fast forwards the scene (Flash +). : Proceeds to the next location. ~: Fast reverses. : Plays. : Fast forwards. : Records. H: Pauses. N: Stops. _A, B, C buttons D: (Live TV) Displays Master Guide. jLIST: Displays the title of recorded program.
jMENU: Calls up the menu display. _INPUT: Changes the input mode. jjg1 9, 0, ENTER, (dot): Changes the channel. For example, to change to channel 5, press 0 and 5 (or, press 5 and ENTER). jPAGE +/: Page up/down jFAVORITES: Enables the Favorite function. jINFO: Displays program information. gOPTIONS: Displays the options menu. gRECALL: Switches between the current and previous channel. gCH +/: Switches the channel up/ down.
Satellite receiver m: Proceeds to the previous location. : Briefly replays the scene (Flash ). : Briefly fast forwards the scene (Flash +). : Proceeds to the next location. ~: Fast reverses. : Plays. : Fast forwards. : Records. H: Pauses. N: Stops. _A: Red button B: Green button C: Yellow button D: Blue button jLIST: Displays the title of recorded program/PVR menu.
jMENU: Calls up the menu display. _INPUT: (TV/SAT) Switches the output between SAT and TV. jjg1 9, 0, ENTER, (dot): Changes the channel. For example, to change to channel 5, press 0 and 5 (or, press 5 and ENTER). jPAGE +/: Page up/down jFAVORITES: Enables the Favorite function. jINFO: Displays program information. gOPTIONS: Displays the Satellite dish menu/Station Index. gRECALL: Tunes to the last tuned station. gCH +/: Switches the channel up/ down.
VCR ~: Rewinds. : Plays. : Fast forwards. : Records. H: Pauses. N: Stops. _INPUT: Changes the input mode. j1 9, 0: Number buttons j: Ejects a tape.
jINFO: (DISPLAY) Displays the playback information. gOPTIONS: (ANT/SW) Switches the antenna output. gRECALL: (DRIVE SELECT) Selects the deck. gCH +/: Switches the channel up/ down. gENTER: Enters the selected item. DVDplayer/recorder m: Skips to the previous chapter/track. : Briefly replays the scene (Flash ). : Briefly fast forwards the scene (Flash +). : Skips to the next chapter/ track. ~: Fast reverses. : Plays. : Fast forwards. : Records (for DVD recorder). H: Pauses. N: Stops. _A: (SET UP) Calls up the system/ setup menu. B: (SUBTITLE) Switches the subtitle. C: (AUDIO) Changes the sound. D: (CLEAR) Clears the setting. jLIST: Displays the Title List. jMENU: Displays the DVD menu.
_INPUT: Changes the input mode. j1 9, 0: Number buttons j (dot): (+10) Selects numbers 10 and above. j: Opens/closes the disc tray. jPAGE +: (DVD) Selects the DVD drive. PAGE : (HDD) Selects the internal HDD (hard disk drive). jFAVORITES: (TOP MENU) Displays the Top Menu. jINFO: (DISPLAY) Displays the playback information. gOPTIONS: Displays the options menu. gRECALL: (DRIVE SELECT) Switches between HDD and DVD. gCH +/: Switches the channel up/ down (for DVD recorder). gENTER: Enters the selected item.
Blu-ray Disc/HD-DVDplayer m: Skips to the previous chapter/track. : Briefly replays the scene (Flash ). : Briefly fast forwards the scene (Flash +). : Skips to the next chapter/ track. ~: Fast reverses. : Plays. : Fast forwards. : Records (for BD recorder). H: Pauses. N: Stops. _A: (SET UP) Calls up the system/ setup menu. B: (SUBTITLE) Switches the subtitle. C: (AUDIO) Changes the sound. D: (CLEAR) Clears the setting.
jMENU: Displays the Pop-up Menu/ Disc Menu. _INPUT: Changes the input mode. j1 9, 0: Number buttons j (dot): (+10) Selects numbers 10 and above. j: Opens/closes the disc tray. jPAGE +: (BD) Selects the BD drive. PAGE : (HDD) Selects the internal HDD (hard disk drive). jFAVORITES: (TOP MENU) Displays the Top Menu. jINFO: (DISPLAY) Displays the playback information. gOPTIONS: Displays the options menu. gENTER: Enters the selected item.
DVR (digital video recorder)/PVR (personal video recorder) m: Proceeds to the previous location. : Briefly replays the scene (Flash ). : Briefly fast forwards the scene (Flash +). : Proceeds to the next location. ~: Fast reverses. : Plays. : Fast forwards. : Records. H: Pauses. N: Stops. _A: (REPLAY*) Enables the Replay function for DVR/Replay TV. B: (Live TV*) Displays Master Guide. jLIST: Displays the title of recorded program.
jMENU: Calls up the menu display. _INPUT: Changes the input mode. j1 9, 0: Number buttons j (dot): (+10) Selects numbers 10 and above. j: Opens/closes the disc tray. jPAGE +/: Page up/down, Thumbs* up/down jINFO: (DISPLAY) Displays the playback information. gRECALL: Selects the channel previously selected. gCH +/: Switches the channel up/ down. gENTER: Enters the selected item. * These buttons correspond to TiVo service or the Replay service. Refer to its instruction manual for details.
DVDHomeTheater m: Skips to the previous chapter/track. : Briefly replays the scene (Flash ). : Briefly fast forwards the scene (Flash +). : Skips to the next chapter/ track. ~: Fast reverses. : Plays. : Fast forwards. : Records. H: Pauses. N: Stops. _A: (SET UP) Calls up the system/ setup menu. B: (SUBTITLE) Switches the subtitle. C: (AUDIO) Changes the sound. D: (CLEAR) Clears the setting.
jLIST: Enables the SOUND FIELD function. jMENU: Displays the DVD menu. _INPUT: Changes the input mode. j1 9, 0: Number buttons j (dot): (+10) Selects numbers 10 and above. j: Opens/closes the disc tray. jFAVORITES: (TOP MENU) Displays the Top Menu. jINFO: (DISPLAY) Displays the playback information. gOPTIONS: Displays the amplifier menu. gRECALL: (BAND) Selects FM/AM. gCH +/: Presets or tunes frequency up/down. gENTER: Enters the selected item.
Notes on using the RM-VZ220 The RM-VZ220 will not performfunctions that the device is not designed for. For example, if your TV does not have the muting function, MUTING on the RM-VZ220 will not function with your TV. The function of the buttons varies depending on settings/operating modes. The table of Remote Button Descriptions shows how the RM-VZ220 generally operates for each device in the preset mode. If your cable set top box can control volume, be sure to set its volume to a moderate level. If the volume on the cable set top box is turned down completely, you will not be able to adjust your TVs volume with the RM-VZ220.
Manufacturers Code List / Lista de cdigos del fabricante English The following tables show brand names (Brand) and their corresponding code numbers (Code No.). 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 2 Enter the manufacturers code. The SET indicator flashes three times and turns off. Espaol La siguiente tabla muestra los nombres de las marcas (Brand) y el nmero de cdigo correspondiente (Code No.). 1 Presione y mantenga presionado el botn SET durante ms de 3 segundos. Se encender la luz indicadora SET. Mientras tiene presionado el botn SET, presione el botn de seleccin de dispositivo deseado y luego suelte ambos botones. 2 Ingrese el cdigo del fabricante. El indicador SET parpadear tres veces y se apagar.
Brand Code No. Acer 01339 Action 00650 Admiral 00463 Akai 00812, 01675, 00702, 02232 Akira 01733 AOC 01365, 01589 Apex Digital 00748 Aventura 00171 Bell & Howell 00154 BPL 01543 Broksonic 00463 Carver 00054 Celebrity 00000 Coby 02306, 02345, 02348 Commercial Solutions 01447 Crosley 00054 Curtis 02352 Curtis Mathes 00054, 00154, 00702, 01661 Daewoo 01661 Digital Lifestyles 01765 Durabrand 00463, 00171 Dynex 01463, 01810, 02049 Electroband 00000 Electrograph 01755 Electrohome 00463 Elektra 01661 Element 01687 Emerson 01864, 00154, 00463, 00171, 01661, 01394 Emprex 01765 Envision 01365, 01589 ESA 00812, 00171 Fisher 00154 Funai 00171 Gateway 01755, 01756 GE 01447, 00051, 02359 GFM 00171 Haier 01748, 01749, 02309, 02449 Harman/Kardon 00054 Hisense 00748, 01314, 02098 Hitachi 01643, 02215, 02433 iLo 01684 Infinity 00054 Insignia 01564, 00171, 02049 JBL 00054 JCB 00000 JVC 00731, 01253, 01601, 01774 KDS 01687 Kolin 01331 LG 01423, 02358 LXI 00054, 00154, 00156 MAG 01687 Magnavox 01454, 01866, 00054, 01254, 01365, 02372 Marantz 00054 Matsushita 00650 Maxent 01755 Memorex 00154, 00463, 00150 MGA 00150 Midland 00051
Brand Code No. Mitsubishi 01250, 00150, 00836 NAD 00156 NEC 01797 NetTV 01755 Norcent 00748, 01365, 01589 Olevia 01610, 01144, 01331 Onida 01253, 02396 Optimus 00154, 00650 Orion 00463, 01463 Panasonic 01480, 00051, 00650 PARK 02104 Penney 00156, 00051 Petters 01523 Philco 00054 Philips 01454, 00054, 00690, 01744, 02372 Pioneer 01457, 01260 Polaroid 01523, 01276, 01314, 01687 Portland 01661 Prism 00051 Proscan 01447, 02147, 02256 Proview 01687 Quasar 00051, 00650 RadioShack 00154 RCA 01447, 01781, 02187, 02247, 02403, 02429, 02434 Realistic 00154 Sampo 01755 Samsung 00812, 00702 Sansui 00463 Sanyo 00154, 01142 Sceptre 01360, 01599 Scott 01711 Sears 00054, 00154, 00156, 00171 Sharp 00818 Sony 00810, 00000 Spectroniq 01687 Squareview 00171 Superscan 00864 Supreme 00000 SVA 00748 Sylvania 01864, 00054, 00171, 01314, 01394 Symphonic 00171 Syntax 01610, 01144, 01331 Tatung 01756 TCL 02403, 02429 Technics 00051 Techwood 00051 Teknika 00054, 00150 Telefunken 00702 Toshiba 01524, 00154, 00156, 00650 TVS 00463 Venturer 01865 Videocon 01540, 01541, 02436 Vidikron 00054 Viewsonic 01755, 00864, 00885, 01627, 01742 Viore 01684, 02104, 02352 Vizio 01758, 00864, 00885, 01756 VU 02098
TV/ TV
Brand Code No. Wards 00054 Waycon 00156 Westinghouse 01712, 00885, 01577 White Westinghouse 00463, 01661 Wyse 01365 Zenith 00463, 01661
Brand Code No. Accurian 10675 Akai 10695 Allegro 10869 Apex Digital 10672, 11056 Bel Canto Design 11571 Broksonic 10695 CineVision 10869 Citizen 10695 CyberHome 11024 Daewoo 10869 Denon 10490, 11634, 12258 Disney 10675, 11270 Emerson 10591, 10675 Enterprise 10591 Funai 10675 GE 10522 GFM 10675 Go Video 10744, 10741, 10869, 11044, 11075 GoldStar 10741 Harman/Kardon 11229 Hitachi 10573, 10664 Hiteker 10672 Insignia 10675, 12428, 12596 Integra 11769, 10627, 12147 JVC 10623, 10867, 11164 Kenwood 10490 LG 10591, 10741, 10869 Magnavox 10503, 10539, 10646, 10675, 11354 Marantz 10539, 12414, 12432 Memorex 10695, 11270, 12213 Microsoft 10522, 12083 Mitsubishi 11521 NAD 10741, 12572 Olevia 12331 Onkyo 10503, 11769, 10627, 11627, 12147
Brand Code No. Oppo 10575, 12545 Panasonic 10490, 11579, 11641 Philco 10675 Philips 10503, 10539, 12056, 12084, 10646, 10675, 11267, 11354, 12434 Pioneer 10142, 10631, 11571, 12442 Polk Audio 10539 Presidian 10675 Proscan 10522 RCA 10522, 11769, 10822, 12213, 12587, 12592, 12594 Rio 10869 Rotel 10623 Samsung 10490, 10573, 10199, 11044, 11075, 12329, 12489 Sansui 10695 Sanyo 10695 Sharp 10630, 10675, 12250 Shinsonic 10533 Sonic Blue 10869 Sony 11633, 10533, 10864, 11033, 11070, 11431, 11516 Sylvania 10675 Symphonic 10675 TCL 12587 Technics 10490 Tivo 11503 Toshiba 10503, 11769, 10695, 11154, 11503, 12006, 12277 Urban Concepts 10503 Viore 12553 Vizio 12563 Vtrek 12587 Xbox 10522, 12083 Yamaha 10490, 10539, 10497, 10817, 12298 Zenith 10503, 10591, 10741, 10869
DVDplayer / Reproductor de DVD
Brand Code No. Accurian 10675 Apex Digital 11056 Funai 10675 Go Video 10741 JVC 11164 LG 10741 Magnavox 10646, 10675 Panasonic 10490, 11579 Philips 10646
Brand Code No. Pioneer 10631 RCA 10522 Samsung 10490 Sharp 10675 Sony 11033, 11070, 11431 Sylvania 10675 Toshiba 12277 Zenith 10741
DVDrecorder / Grabadora de DVD
Blu-ray Disc/HD-DVDplayer/ Reproductor de Blu-ray Disc/HD-DVD Brand Code No. Denon 12258 Insignia 10675, 12428, 12596 Integra 11769, 12147 LG 10741 Magnavox 10675 Marantz 12414, 12432 Microsoft 12083 NAD 12572 Olevia 12331 Onkyo 11769, 12147 Oppo 12545 Panasonic 11641
Brand Code No. Philips 12084, 12434 Pioneer 10142, 12442 RCA 11769 Samsung 10199 Sharp 12250 Sony 11516 Sylvania 10675 Toshiba 11769 Viore 12553 Vizio 12563 Xbox 12083 Yamaha 12298
RM-VZ220_U [US,ES] 4-170-642-12(1) RM-VZ220_U [US,ES] 4-170-642-12(1)
4-170-642-12(1)
Remote Commander
RM-VZ220
2010 Sony Corporation Printed in China
Operating Instructions
Manual de instrucciones (parte posterior)
English
For the Customers in the U.S.A.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different fromthat to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
Setting Up the RM-VZ220
The RM-VZ220 is preset at the factory to operate Sony brand video devices
set to any of the Device Select buttons (see the table below).
To use with non-Sony devices, or Sony devices that are not preset at the
factory, set the manufacturers code for each device.
Devices Button Factory setting*
TV TV Sony TV (00810)
TV, Cable set top box, Satellite
receiver, IPTV, DVD player, DVD
recorder, Blu-ray Disc player, DVR
(digital video recorder), PVR
(personal video recorder), VCR,
DVD Home Theater
CBL (SAT) Cable set top box (non-
Sony) (51376)
VCR Sony VCR (60032)
DVD Sony DVD player
(11033)
* The five-digit code is the preset manufacturers code.
Note
Only a TV can be assigned to the TV Device Select button. You can assign any device to
the other Device Select buttons.
Installing the batteries
Slide open the battery compartment and insert two size AA (R6) dry
batteries (not supplied).
Insert the batteries (negative end first) through the guide clamp within each
compartment as shown below.
1 2
Battery life
Under normal conditions, size AA (LR6) alkaline batteries will last up to one
year. If the RM-VZ220 does not operate properly, the batteries might be
drained. Replace both batteries with new ones.
Notes
Replace the batteries within 2 minutes after removing them, and do not press any
button when replacing the batteries. Otherwise, your code settings may be cleared.
Do not use an old battery with a new one, or mix different types of batteries together.
If the electrolyte inside the battery should leak, wipe the contaminated area of the
battery compartment with a cloth and replace the old batteries with new ones. To
prevent electrolyte fromleaking, remove the batteries when you plan not to use the
RM-VZ220 for a long period of time.
Specifications
Operating distance Approx. 11 m(36 ft) (varies depending on devices of
different manufacturers)
Power requirements Two size AA (R6) dry batteries (not supplied)
Battery life Approx. 1 year when using size AA (LR6) alkaline batteries
(varies depending on frequency of button use - up to approx.
300 times per day.)
Dimensions Approx. 53 213 27 mm(2 1/8 8 1/2 1 1/8 in.)
(w/h/d)
Mass Approx. 100 g (3.5 oz) (not including batteries)
Design and specifications are subject to change without notice.
Troubleshooting
If you have problems setting up or using the RM-VZ220:
Carefully performthe setup procedure of Startup Guide. If the RM-VZ220 does not
work, try repeating the setup procedure using another manufacturers code (if listed
for your device). If you still cannot operate the RM-VZ220, try the Search function
(see Searching for the correct code).
Aimthe RM-VZ220 directly at the device.
Remove any obstacles in the path between the RM-VZ220 and the device.
Make sure you have pressed the correct Device Select button.
Check that the device has infrared remote capability. For example, if your device did
not come with a remote control, it probably is not capable of being controlled by the
RM-VZ220.
The batteries are weak, or not inserted correctly. Replace themwith new ones or insert
them correctly.
For the customers in the U.S.A.
Customer Support Information
After you have read through this manual, if you still cannot get the RM-VZ220 to work
properly, call the Sony Customer Support Helpline at
1-800-822-2217.
Startup Guide
This guide shows you howto set up and use the RM-VZ220 to operate your devices.
If your Sony device has already been preset, see Operate the device.
Set the manufacturers code
Example: To set up a Philips TV
1 Find the manufacturers code in Manufacturers Code List.
Manufacturers Code List / Lista de cdigos del fabricante English The following tables show brand names (Brand) and their corresponding code numbers (Code No.). 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 2 Enter the manufacturers code. The SET indicator flashes three times and turns off. Espaol La siguiente tabla muestra los nombres de las marcas (Brand) y el nmero de cdigo correspondiente (Code No.). 1 Presione y mantenga presionado el botn SET durante ms de 3 segundos. Se encender la luz indicadora SET. Mientras tiene presionado el botn SET, presione el botn de seleccin de dispositivo deseado y luego suelte ambos botones. 2 Ingrese el cdigo del fabricante. El indicador SET parpadear tres veces y se apagar.
Brand Code No. Sony 00810, 00000 Acer 01339 Action 00650 Admiral 00463 Akai 00812, 01675, 00702, 02232 Akira 01733 AOC 01365, 01589 Apex Digital 00748 Aventura 00171 Bell & Howell 00154 BPL 01543 Broksonic 00463 Carver 00054 Celebrity 00000 Coby 02306, 02345, 02348 Commercial Solutions 01447 Crosley 00054 Curtis 02352 Curtis Mathes 00054, 00154, 00702, 01661 Daewoo 01661 Digital Lifestyles 01765 Durabrand 00463, 00171 Dynex 01463, 01810, 02049 Electroband 00000 Electrograph 01755 Electrohome 00463 Elektra 01661 Element 01687 Emerson 01864, 00154, 00463, 00171, 01661, 01394 Emprex 01765 Envision 01365, 01589 ESA 00812, 00171 Fisher 00154 Funai 00171 Gateway 01755, 01756 GE 01447, 00051, 02359 GFM 00171 Haier 01748, 01749, 02309, 02449 Harman/Kardon 00054 Hisense 00748, 01314, 02098 Hitachi 01643, 02215, 02433 iLo 01684 Infinity 00054 Insignia 01564, 00171, 02049 JBL 00054 JCB 00000 JVC 00731, 01253, 01601, 01774 KDS 01687 Kolin 01331 LG 01423, 02358 LXI 00054, 00154, 00156 MAG 01687 Magnavox 01454, 01866, 00054, 01254, 01365, 02372 Marantz 00054 Matsushita 00650 Maxent 01755 Memorex 00154, 00463, 00150 MGA 00150
Brand Code No. Midland 00051 Mitsubishi 01250, 00150, 00836 NAD 00156 NEC 01797 NetTV 01755 Norcent 00748, 01365, 01589 Olevia 01610, 01144, 01331 Onida 01253, 02396 Optimus 00154, 00650 Orion 00463, 01463 Panasonic 01480, 00051, 00650 PARK 02104 Penney 00156, 00051 Petters 01523 Philco 00054 Philips 01454, 00054, 00690, 01744, 02372 Pioneer 01457, 01260 Polaroid 01523, 01276, 01314, 01687 Portland 01661 Prism 00051 Proscan 01447, 02147, 02256 Proview 01687 Quasar 00051, 00650 RadioShack 00154 RCA 01447, 01781, 02187, 02247, 02403, 02429, 02434 Realistic 00154 Sampo 01755 Samsung 00812, 00702 Sansui 00463 Sanyo 00154, 01142 Sceptre 01360, 01599 Scott 01711 Sears 00054, 00154, 00156, 00171 Sharp 00818 Spectroniq 01687 Squareview 00171 Superscan 00864 Supreme 00000 SVA 00748 Sylvania 01864, 00054, 00171, 01314, 01394 Symphonic 00171 Syntax 01610, 01144, 01331 Tatung 01756 TCL 02403, 02429 Technics 00051 Techwood 00051 Teknika 00054, 00150 Telefunken 00702 Toshiba 01524, 00154, 00156, 00650 TVS 00463 Venturer 01865 Videocon 01540, 01541, 02436 Vidikron 00054 Viewsonic 01755, 00864, 00885, 01627, 01742 Viore 01684, 02104, 02352 Vizio 01758, 00864, 00885, 01756 VU 02098
TV/ TV
Brand Code No. Wards 00054 Waycon 00156 Westinghouse 01712, 00885, 01577 White Westinghouse 00463, 01661 Wyse 01365 Zenith 00463, 01661
Brand Code No. Sony 11633, 10533, 10864, 11033, 11070, 11431, 11516 Accurian 10675 Akai 10695 Allegro 10869 Apex Digital 10672, 11056 Bel Canto Design 11571 Broksonic 10695 CineVision 10869 Citizen 10695 CyberHome 11024 Daewoo 10869 Denon 10490, 11634, 12258 Disney 10675, 11270 Emerson 10591, 10675 Enterprise 10591 Funai 10675 GE 10522 GFM 10675 Go Video 10744, 10741, 10869, 11044, 11075 GoldStar 10741 Harman/Kardon 11229 Hitachi 10573, 10664 Hiteker 10672 Insignia 10675, 12428, 12596 Integra 11769, 10627, 12147 JVC 10623, 10867, 11164 Kenwood 10490 LG 10591, 10741, 10869 Magnavox 10503, 10539, 10646, 10675, 11354 Marantz 10539, 12414, 12432 Memorex 10695, 11270, 12213 Microsoft 10522, 12083 Mitsubishi 11521 NAD 10741, 12572 Olevia 12331
Brand Code No. Onkyo 10503, 11769, 10627, 11627, 12147 Oppo 10575, 12545 Panasonic 10490, 11579, 11641 Philco 10675 Philips 10503, 10539, 12056, 12084, 10646, 10675, 11267, 11354, 12434 Pioneer 10142, 10631, 11571, 12442 Polk Audio 10539 Presidian 10675 Proscan 10522 RCA 10522, 11769, 10822, 12213, 12587, 12592, 12594 Rio 10869 Rotel 10623 Samsung 10490, 10573, 10199, 11044, 11075, 12329, 12489 Sansui 10695 Sanyo 10695 Sharp 10630, 10675, 12250 Shinsonic 10533 Sonic Blue 10869 Sylvania 10675 Symphonic 10675 TCL 12587 Technics 10490 Tivo 11503 Toshiba 10503, 11769, 10695, 11154, 11503, 12006, 12277 Urban Concepts 10503 Viore 12553 Vizio 12563 Vtrek 12587 Xbox 10522, 12083 Yamaha 10490, 10539, 10497, 10817, 12298 Zenith 10503, 10591, 10741, 10869
DVDplayer / Reproductor de DVD
Brand Code No. Sony 11033, 11070, 11431 Accurian 10675 Apex Digital 11056 Funai 10675 Go Video 10741 JVC 11164 LG 10741 Magnavox 10646, 10675 Panasonic 10490, 11579
Brand Code No. Philips 10646 Pioneer 10631 RCA 10522 Samsung 10490 Sharp 10675 Sylvania 10675 Toshiba 12277 Zenith 10741
DVDrecorder / Grabadora de DVD
Blu-ray Disc/HD-DVDplayer/ Reproductor de Blu-ray Disc/HD-DVD Brand Code No. Sony 11516 Denon 12258 Insignia 10675, 12428, 12596 Integra 11769, 12147 LG 10741 Magnavox 10675 Marantz 12414, 12432 Microsoft 12083 NAD 12572 Olevia 12331 Onkyo 11769, 12147 Oppo 12545
Brand Code No. Panasonic 11641 Philips 12084, 12434 Pioneer 10142, 12442 RCA 11769 Samsung 10199 Sharp 12250 Sylvania 10675 Toshiba 11769 Viore 12553 Vizio 12563 Xbox 12083 Yamaha 12298
Brand Code No.
Sony 00810, 00000
Acer 01339
Action 00650
Brand Code No.
Midland 00051
Mitsubishi 01250, 00150, 00836
NAD 00156
TV/ TV
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial Solutions 01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Panasonic 01480, 00051, 00650
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744, 02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
If your device is not listed, try the Search function (see Searching for the correct code).
2 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press
the desired Device Select button,
then release both buttons.
3 Enter the manufacturers code (01454).
The SET indicator flashes three times and
turns off.

Operate the device


1 Aim the RM-VZ220 directly at the device.
2 Press the Device Select button for the
device you want to operate.
3 Press POWER to turn on the device.
4 Press buttons on the RM-VZ220 to check that they function.
See Remote Button Descriptions for the functions of buttons for each device.
If the RM-VZ220 does not seemto be working
Check that you have set the correct manufacturers code.
Try repeating the setup procedure using another manufacturers code (if listed for your device).
If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see Searching
for the correct code).
Notes
If the setting is incomplete,
the SET indicator flashes once
and the indicators turn off.
Start again fromthe
beginning.
If no operations are
performed for 10 seconds
while setting, the setting will
be canceled, and must be
restarted.
To cancel the process, press
SET any time. The SET
indicator turns off.
SET
POWER
Device
Select
buttons
Number
buttons
The SET indicator
lights up.
Searching for the correct code
You can set the manufacturers code using the Search function.
1 Power on the device with its power switch.
2 Aimthe RM-VZ220 at the device you want to set.
3 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
4 Enter 9 - 2 - 2 using the number buttons.
The SET indicator flashes three times.
5 Press and hold to start searching.
When the device turns off, release the button.
If you overshoot the required code, you can search for the next or previous
code using the or ~ button.
6 Press .
The SET indicator flashes three times and turns off.
7 Check if the code number works correctly (see Remote Button
Descriptions).
If you still cannot operate the device, repeat steps to search for another
code that works for most functions of your device.
Checking the manufacturers code you have set
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
2 Enter 9 - 3 - 3 using the number buttons.
The SET indicator flashes three times.
3 Press .
4 When the SET indicator starts flashing, count the number of flashes.
Short flash(es) indicate which digit (first, second, etc.), followed by long
flash(es) to indicate the digit number (i.e., 2 long flashes represent the
number 2). 0 is indicated by rapid flashing.
Determine the 5-digit code number this way. To recheck, press .
5 Press SET to finish.
Clearing the automatic power-on control (Sony
devices only)
The Device Select buttons are preset to automatically turn on a device when
pressed.
To cancel the function:
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press , then release both buttons.
2 Enter 9 - 7 - 7 using the number buttons.
The SET indicator flashes three times.
3 Press the desired Device Select button.
The SET indicator flashes three times and turns off.
To set the function again, performthe same procedure above.
Restoring the factory settings
You can clear all the settings and reset the RM-VZ220 to its factory settings.
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press , then release both buttons.
2 Enter 9 - 0 - 0 using the number buttons.
The SET indicator flashes three times.
To cancel, press any button except .
3 Press .
The SET indicator flashes three times and turns off.
Remote Button Descriptions
General
_ SET: Press to set up the RM-VZ220. The indicator lights or flashes while
setting.
_Device Select buttons: Press to select the device to operate.
_GUIDE: Displays the programguide (EPG).
+//+/+/ : Moves the cursor to select a menu item/enters the selected item.
_RETURN: Returns to the previous display/exits the menu.
jVOL +/: Turns the volume up/down.
jPOWER: Turns the selected device on and off.
gMUTING: Mutes the volume. Press again to turn muting off.
gSLEEP: Enables the Sleep function (when available).
The number 5, CH+, and buttons each have a tactile dot for ease of use.
The GUIDE and RETURN buttons do not work for a VCR.
Note on theVOL+/ and MUTINGbuttons
When a TV or other video device is selected, the TVs volume is controlled. When a
DVD Home Theater is selected, its volume can be controlled.
TV
m: VIDEO 1 input
: VIDEO 2 input
: HDMI input
: RGB input
~: (PIP INPUT) Changes the
input mode of the window
picture.
: (PIP) Turns the window
picture on and off.
: (PIP MOVE) Moves the
location of the window picture.
H: (PIP STILL) Freezes the
window picture.
N: (PIP SWAP) Switches between
main and window picture.
_A: Red button
B: Green button
C: Yellow button
D: Blue button
jLIST: (CAPTION) Displays closed
captioning.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
jjg1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: (PIP CH+/) Changes
the channel up/down in the
window picture.
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the options
menu.
gRECALL: Selects the channel
previously selected.
gCH +/: Switches the channel up/
down.
Cable set top box/IPTV
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A, B, C buttons
D: (Live TV) Displays Master
Guide.
jLIST: Displays the title of recorded
program.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
jjg1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: Page up/down
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the options
menu.
gRECALL: Switches between the
current and previous channel.
gCH +/: Switches the channel up/
down.
Satellite receiver
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: Red button
B: Green button
C: Yellow button
D: Blue button
jLIST: Displays the title of recorded
program/PVR menu.
jMENU: Calls up the menu display.
_INPUT: (TV/SAT) Switches the
output between SAT and TV.
jjg1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: Page up/down
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the Satellite
dish menu/Station Index.
gRECALL: Tunes to the last tuned
station.
gCH +/: Switches the channel up/
down.
VCR
~: Rewinds.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j: Ejects a tape.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: (ANT/SW) Switches
the antenna output.
gRECALL: (DRIVE SELECT) Selects
the deck.
gCH +/: Switches the channel up/
down.
gENTER: Enters the selected item.
DVDplayer/recorder
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records (for DVD recorder).
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jLIST: Displays the Title List.
jMENU: Displays the DVD menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +: (DVD) Selects the DVD
drive.
PAGE : (HDD) Selects the
internal HDD (hard disk drive).
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the options
menu.
gRECALL: (DRIVE SELECT)
Switches between HDD and DVD.
gCH +/: Switches the channel up/
down (for DVD recorder).
gENTER: Enters the selected item.
Blu-ray Disc/HD-DVDplayer
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records (for BD recorder).
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jMENU: Displays the Pop-up Menu/
Disc Menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +: (BD) Selects the BD drive.
PAGE : (HDD) Selects the
internal HDD (hard disk drive).
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the options
menu.
gENTER: Enters the selected item.
DVR (digital video recorder)/PVR (personal video recorder)
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: (REPLAY*) Enables the Replay
function for DVR/Replay TV.
B: (Live TV*) Displays Master
Guide.
jLIST: Displays the title of recorded
program.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +/: Page up/down,
Thumbs* up/down
jINFO: (DISPLAY) Displays the
playback information.
gRECALL: Selects the channel
previously selected.
gCH +/: Switches the channel up/
down.
gENTER: Enters the selected item.
* These buttons correspond to TiVo
service or the Replay service. Refer to
its instruction manual for details.
DVDHomeTheater
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jLIST: Enables the SOUND FIELD
function.
jMENU: Displays the DVD menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the amplifier
menu.
gRECALL: (BAND) Selects FM/AM.
gCH +/: Presets or tunes frequency
up/down.
gENTER: Enters the selected item.
Notes on using the RM-VZ220
The RM-VZ220 will not performfunctions that the device is not designed for. For
example, if your TV does not have the muting function, MUTING on the RM-VZ220
will not function with your TV.
The function of the buttons varies depending on settings/operating modes. The table
of Remote Button Descriptions shows how the RM-VZ220 generally operates for
each device in the preset mode.
If your cable set top box can control volume, be sure to set its volume to a moderate
level. If the volume on the cable set top box is turned down completely, you will not be
able to adjust your TVs volume with the RM-VZ220.
Manufacturers Code List /
Lista de cdigos del fabricante
English
The following tables show brand names (Brand) and their corresponding
code numbers (Code No.).
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
2 Enter the manufacturers code.
The SET indicator flashes three times and turns off.
Espaol
La siguiente tabla muestra los nombres de las marcas (Brand) y el nmero
de cdigo correspondiente (Code No.).
1 Presione y mantenga presionado el botn SET durante ms de 3 segundos.
Se encender la luz indicadora SET.
Mientras tiene presionado el botn SET, presione el botn de seleccin de
dispositivo deseado y luego suelte ambos botones.
2 Ingrese el cdigo del fabricante.
El indicador SET parpadear tres veces y se apagar.
Brand Code No.
Acer 01339
Action 00650
Admiral 00463
Akai 00812, 01675, 00702, 02232
Akira 01733
AOC 01365, 01589
Apex Digital 00748
Aventura 00171
Bell & Howell 00154
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial
Solutions
01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Dynex 01463, 01810, 02049
Electroband 00000
Electrograph 01755
Electrohome 00463
Elektra 01661
Element 01687
Emerson 01864, 00154, 00463, 00171,
01661, 01394
Emprex 01765
Envision 01365, 01589
ESA 00812, 00171
Fisher 00154
Funai 00171
Gateway 01755, 01756
GE 01447, 00051, 02359
GFM 00171
Haier 01748, 01749, 02309, 02449
Harman/Kardon 00054
Hisense 00748, 01314, 02098
Hitachi 01643, 02215, 02433
iLo 01684
Infinity 00054
Insignia 01564, 00171, 02049
JBL 00054
JCB 00000
JVC 00731, 01253, 01601, 01774
KDS 01687
Kolin 01331
LG 01423, 02358
LXI 00054, 00154, 00156
MAG 01687
Magnavox 01454, 01866, 00054, 01254,
01365, 02372
Marantz 00054
Matsushita 00650
Maxent 01755
Memorex 00154, 00463, 00150
MGA 00150
Midland 00051
Brand Code No.
Mitsubishi 01250, 00150, 00836
NAD 00156
NEC 01797
NetTV 01755
Norcent 00748, 01365, 01589
Olevia 01610, 01144, 01331
Onida 01253, 02396
Optimus 00154, 00650
Orion 00463, 01463
Panasonic 01480, 00051, 00650
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744,
02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
Quasar 00051, 00650
RadioShack 00154
RCA 01447, 01781, 02187, 02247,
02403, 02429, 02434
Realistic 00154
Sampo 01755
Samsung 00812, 00702
Sansui 00463
Sanyo 00154, 01142
Sceptre 01360, 01599
Scott 01711
Sears 00054, 00154, 00156, 00171
Sharp 00818
Sony 00810, 00000
Spectroniq 01687
Squareview 00171
Superscan 00864
Supreme 00000
SVA 00748
Sylvania 01864, 00054, 00171, 01314,
01394
Symphonic 00171
Syntax 01610, 01144, 01331
Tatung 01756
TCL 02403, 02429
Technics 00051
Techwood 00051
Teknika 00054, 00150
Telefunken 00702
Toshiba 01524, 00154, 00156, 00650
TVS 00463
Venturer 01865
Videocon 01540, 01541, 02436
Vidikron 00054
Viewsonic 01755, 00864, 00885, 01627,
01742
Viore 01684, 02104, 02352
Vizio 01758, 00864, 00885, 01756
VU 02098
TV/ TV
Brand Code No.
Wards 00054
Waycon 00156
Westinghouse 01712, 00885, 01577
White
Westinghouse
00463, 01661
Wyse 01365
Zenith 00463, 01661
Brand Code No.
Accurian 10675
Akai 10695
Allegro 10869
Apex Digital 10672, 11056
Bel Canto Design 11571
Broksonic 10695
CineVision 10869
Citizen 10695
CyberHome 11024
Daewoo 10869
Denon 10490, 11634, 12258
Disney 10675, 11270
Emerson 10591, 10675
Enterprise 10591
Funai 10675
GE 10522
GFM 10675
Go Video 10744, 10741, 10869, 11044,
11075
GoldStar 10741
Harman/Kardon 11229
Hitachi 10573, 10664
Hiteker 10672
Insignia 10675, 12428, 12596
Integra 11769, 10627, 12147
JVC 10623, 10867, 11164
Kenwood 10490
LG 10591, 10741, 10869
Magnavox 10503, 10539, 10646, 10675,
11354
Marantz 10539, 12414, 12432
Memorex 10695, 11270, 12213
Microsoft 10522, 12083
Mitsubishi 11521
NAD 10741, 12572
Olevia 12331
Onkyo 10503, 11769, 10627, 11627,
12147
Brand Code No.
Oppo 10575, 12545
Panasonic 10490, 11579, 11641
Philco 10675
Philips 10503, 10539, 12056, 12084,
10646, 10675, 11267, 11354,
12434
Pioneer 10142, 10631, 11571, 12442
Polk Audio 10539
Presidian 10675
Proscan 10522
RCA 10522, 11769, 10822, 12213,
12587, 12592, 12594
Rio 10869
Rotel 10623
Samsung 10490, 10573, 10199, 11044,
11075, 12329, 12489
Sansui 10695
Sanyo 10695
Sharp 10630, 10675, 12250
Shinsonic 10533
Sonic Blue 10869
Sony 11633, 10533, 10864, 11033,
11070, 11431, 11516
Sylvania 10675
Symphonic 10675
TCL 12587
Technics 10490
Tivo 11503
Toshiba 10503, 11769, 10695, 11154,
11503, 12006, 12277
Urban Concepts 10503
Viore 12553
Vizio 12563
Vtrek 12587
Xbox 10522, 12083
Yamaha 10490, 10539, 10497, 10817,
12298
Zenith 10503, 10591, 10741, 10869
DVDplayer / Reproductor de DVD
Brand Code No.
Accurian 10675
Apex Digital 11056
Funai 10675
Go Video 10741
JVC 11164
LG 10741
Magnavox 10646, 10675
Panasonic 10490, 11579
Philips 10646
Brand Code No.
Pioneer 10631
RCA 10522
Samsung 10490
Sharp 10675
Sony 11033, 11070, 11431
Sylvania 10675
Toshiba 12277
Zenith 10741
DVDrecorder / Grabadora de DVD
Blu-ray Disc/HD-DVDplayer/
Reproductor de Blu-ray Disc/HD-DVD
Brand Code No.
Denon 12258
Insignia 10675, 12428, 12596
Integra 11769, 12147
LG 10741
Magnavox 10675
Marantz 12414, 12432
Microsoft 12083
NAD 12572
Olevia 12331
Onkyo 11769, 12147
Oppo 12545
Panasonic 11641
Brand Code No.
Philips 12084, 12434
Pioneer 10142, 12442
RCA 11769
Samsung 10199
Sharp 12250
Sony 11516
Sylvania 10675
Toshiba 11769
Viore 12553
Vizio 12563
Xbox 12083
Yamaha 12298
RM-VZ220_U [US,ES] 4-170-642-12(1) RM-VZ220_U [US,ES] 4-170-642-12(1)
4-170-642-12(1)
Remote Commander
RM-VZ220
2010 Sony Corporation Printed in China
Operating Instructions
Manual de instrucciones (parte posterior)
English
For the Customers in the U.S.A.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different fromthat to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
Setting Up the RM-VZ220
The RM-VZ220 is preset at the factory to operate Sony brand video devices
set to any of the Device Select buttons (see the table below).
To use with non-Sony devices, or Sony devices that are not preset at the
factory, set the manufacturers code for each device.
Devices Button Factory setting*
TV TV Sony TV (00810)
TV, Cable set top box, Satellite
receiver, IPTV, DVD player, DVD
recorder, Blu-ray Disc player, DVR
(digital video recorder), PVR
(personal video recorder), VCR,
DVD Home Theater
CBL (SAT) Cable set top box (non-
Sony) (51376)
VCR Sony VCR (60032)
DVD Sony DVD player
(11033)
* The five-digit code is the preset manufacturers code.
Note
Only a TV can be assigned to the TV Device Select button. You can assign any device to
the other Device Select buttons.
Installing the batteries
Slide open the battery compartment and insert two size AA (R6) dry
batteries (not supplied).
Insert the batteries (negative end first) through the guide clamp within each
compartment as shown below.
1 2
Battery life
Under normal conditions, size AA (LR6) alkaline batteries will last up to one
year. If the RM-VZ220 does not operate properly, the batteries might be
drained. Replace both batteries with new ones.
Notes
Replace the batteries within 2 minutes after removing them, and do not press any
button when replacing the batteries. Otherwise, your code settings may be cleared.
Do not use an old battery with a new one, or mix different types of batteries together.
If the electrolyte inside the battery should leak, wipe the contaminated area of the
battery compartment with a cloth and replace the old batteries with new ones. To
prevent electrolyte fromleaking, remove the batteries when you plan not to use the
RM-VZ220 for a long period of time.
Specifications
Operating distance Approx. 11 m(36 ft) (varies depending on devices of
different manufacturers)
Power requirements Two size AA (R6) dry batteries (not supplied)
Battery life Approx. 1 year when using size AA (LR6) alkaline batteries
(varies depending on frequency of button use - up to approx.
300 times per day.)
Dimensions Approx. 53 213 27 mm(2 1/8 8 1/2 1 1/8 in.)
(w/h/d)
Mass Approx. 100 g (3.5 oz) (not including batteries)
Design and specifications are subject to change without notice.
Troubleshooting
If you have problems setting up or using the RM-VZ220:
Carefully performthe setup procedure of Startup Guide. If the RM-VZ220 does not
work, try repeating the setup procedure using another manufacturers code (if listed
for your device). If you still cannot operate the RM-VZ220, try the Search function
(see Searching for the correct code).
Aimthe RM-VZ220 directly at the device.
Remove any obstacles in the path between the RM-VZ220 and the device.
Make sure you have pressed the correct Device Select button.
Check that the device has infrared remote capability. For example, if your device did
not come with a remote control, it probably is not capable of being controlled by the
RM-VZ220.
The batteries are weak, or not inserted correctly. Replace themwith new ones or insert
them correctly.
For the customers in the U.S.A.
Customer Support Information
After you have read through this manual, if you still cannot get the RM-VZ220 to work
properly, call the Sony Customer Support Helpline at
1-800-822-2217.
Startup Guide
This guide shows you howto set up and use the RM-VZ220 to operate your devices.
If your Sony device has already been preset, see Operate the device.
Set the manufacturers code
Example: To set up a Philips TV
1 Find the manufacturers code in Manufacturers Code List.
Manufacturers Code List / Lista de cdigos del fabricante English The following tables show brand names (Brand) and their corresponding code numbers (Code No.). 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 2 Enter the manufacturers code. The SET indicator flashes three times and turns off. Espaol La siguiente tabla muestra los nombres de las marcas (Brand) y el nmero de cdigo correspondiente (Code No.). 1 Presione y mantenga presionado el botn SET durante ms de 3 segundos. Se encender la luz indicadora SET. Mientras tiene presionado el botn SET, presione el botn de seleccin de dispositivo deseado y luego suelte ambos botones. 2 Ingrese el cdigo del fabricante. El indicador SET parpadear tres veces y se apagar.
Brand Code No. Sony 00810, 00000 Acer 01339 Action 00650 Admiral 00463 Akai 00812, 01675, 00702, 02232 Akira 01733 AOC 01365, 01589 Apex Digital 00748 Aventura 00171 Bell & Howell 00154 BPL 01543 Broksonic 00463 Carver 00054 Celebrity 00000 Coby 02306, 02345, 02348 Commercial Solutions 01447 Crosley 00054 Curtis 02352 Curtis Mathes 00054, 00154, 00702, 01661 Daewoo 01661 Digital Lifestyles 01765 Durabrand 00463, 00171 Dynex 01463, 01810, 02049 Electroband 00000 Electrograph 01755 Electrohome 00463 Elektra 01661 Element 01687 Emerson 01864, 00154, 00463, 00171, 01661, 01394 Emprex 01765 Envision 01365, 01589 ESA 00812, 00171 Fisher 00154 Funai 00171 Gateway 01755, 01756 GE 01447, 00051, 02359 GFM 00171 Haier 01748, 01749, 02309, 02449 Harman/Kardon 00054 Hisense 00748, 01314, 02098 Hitachi 01643, 02215, 02433 iLo 01684 Infinity 00054 Insignia 01564, 00171, 02049 JBL 00054 JCB 00000 JVC 00731, 01253, 01601, 01774 KDS 01687 Kolin 01331 LG 01423, 02358 LXI 00054, 00154, 00156 MAG 01687 Magnavox 01454, 01866, 00054, 01254, 01365, 02372 Marantz 00054 Matsushita 00650 Maxent 01755 Memorex 00154, 00463, 00150 MGA 00150
Brand Code No. Midland 00051 Mitsubishi 01250, 00150, 00836 NAD 00156 NEC 01797 NetTV 01755 Norcent 00748, 01365, 01589 Olevia 01610, 01144, 01331 Onida 01253, 02396 Optimus 00154, 00650 Orion 00463, 01463 Panasonic 01480, 00051, 00650 PARK 02104 Penney 00156, 00051 Petters 01523 Philco 00054 Philips 01454, 00054, 00690, 01744, 02372 Pioneer 01457, 01260 Polaroid 01523, 01276, 01314, 01687 Portland 01661 Prism 00051 Proscan 01447, 02147, 02256 Proview 01687 Quasar 00051, 00650 RadioShack 00154 RCA 01447, 01781, 02187, 02247, 02403, 02429, 02434 Realistic 00154 Sampo 01755 Samsung 00812, 00702 Sansui 00463 Sanyo 00154, 01142 Sceptre 01360, 01599 Scott 01711 Sears 00054, 00154, 00156, 00171 Sharp 00818 Spectroniq 01687 Squareview 00171 Superscan 00864 Supreme 00000 SVA 00748 Sylvania 01864, 00054, 00171, 01314, 01394 Symphonic 00171 Syntax 01610, 01144, 01331 Tatung 01756 TCL 02403, 02429 Technics 00051 Techwood 00051 Teknika 00054, 00150 Telefunken 00702 Toshiba 01524, 00154, 00156, 00650 TVS 00463 Venturer 01865 Videocon 01540, 01541, 02436 Vidikron 00054 Viewsonic 01755, 00864, 00885, 01627, 01742 Viore 01684, 02104, 02352 Vizio 01758, 00864, 00885, 01756 VU 02098
TV/ TV
Brand Code No. Wards 00054 Waycon 00156 Westinghouse 01712, 00885, 01577 White Westinghouse 00463, 01661 Wyse 01365 Zenith 00463, 01661
Brand Code No. Sony 11633, 10533, 10864, 11033, 11070, 11431, 11516 Accurian 10675 Akai 10695 Allegro 10869 Apex Digital 10672, 11056 Bel Canto Design 11571 Broksonic 10695 CineVision 10869 Citizen 10695 CyberHome 11024 Daewoo 10869 Denon 10490, 11634, 12258 Disney 10675, 11270 Emerson 10591, 10675 Enterprise 10591 Funai 10675 GE 10522 GFM 10675 Go Video 10744, 10741, 10869, 11044, 11075 GoldStar 10741 Harman/Kardon 11229 Hitachi 10573, 10664 Hiteker 10672 Insignia 10675, 12428, 12596 Integra 11769, 10627, 12147 JVC 10623, 10867, 11164 Kenwood 10490 LG 10591, 10741, 10869 Magnavox 10503, 10539, 10646, 10675, 11354 Marantz 10539, 12414, 12432 Memorex 10695, 11270, 12213 Microsoft 10522, 12083 Mitsubishi 11521 NAD 10741, 12572 Olevia 12331
Brand Code No. Onkyo 10503, 11769, 10627, 11627, 12147 Oppo 10575, 12545 Panasonic 10490, 11579, 11641 Philco 10675 Philips 10503, 10539, 12056, 12084, 10646, 10675, 11267, 11354, 12434 Pioneer 10142, 10631, 11571, 12442 Polk Audio 10539 Presidian 10675 Proscan 10522 RCA 10522, 11769, 10822, 12213, 12587, 12592, 12594 Rio 10869 Rotel 10623 Samsung 10490, 10573, 10199, 11044, 11075, 12329, 12489 Sansui 10695 Sanyo 10695 Sharp 10630, 10675, 12250 Shinsonic 10533 Sonic Blue 10869 Sylvania 10675 Symphonic 10675 TCL 12587 Technics 10490 Tivo 11503 Toshiba 10503, 11769, 10695, 11154, 11503, 12006, 12277 Urban Concepts 10503 Viore 12553 Vizio 12563 Vtrek 12587 Xbox 10522, 12083 Yamaha 10490, 10539, 10497, 10817, 12298 Zenith 10503, 10591, 10741, 10869
DVDplayer / Reproductor de DVD
Brand Code No. Sony 11033, 11070, 11431 Accurian 10675 Apex Digital 11056 Funai 10675 Go Video 10741 JVC 11164 LG 10741 Magnavox 10646, 10675 Panasonic 10490, 11579
Brand Code No. Philips 10646 Pioneer 10631 RCA 10522 Samsung 10490 Sharp 10675 Sylvania 10675 Toshiba 12277 Zenith 10741
DVDrecorder / Grabadora de DVD
Blu-ray Disc/HD-DVDplayer/ Reproductor de Blu-ray Disc/HD-DVD Brand Code No. Sony 11516 Denon 12258 Insignia 10675, 12428, 12596 Integra 11769, 12147 LG 10741 Magnavox 10675 Marantz 12414, 12432 Microsoft 12083 NAD 12572 Olevia 12331 Onkyo 11769, 12147 Oppo 12545
Brand Code No. Panasonic 11641 Philips 12084, 12434 Pioneer 10142, 12442 RCA 11769 Samsung 10199 Sharp 12250 Sylvania 10675 Toshiba 11769 Viore 12553 Vizio 12563 Xbox 12083 Yamaha 12298
Brand Code No.
Sony 00810, 00000
Acer 01339
Action 00650
Brand Code No.
Midland 00051
Mitsubishi 01250, 00150, 00836
NAD 00156
TV/ TV
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial Solutions 01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Panasonic 01480, 00051, 00650
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744, 02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
If your device is not listed, try the Search function (see Searching for the correct code).
2 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press
the desired Device Select button,
then release both buttons.
3 Enter the manufacturers code (01454).
The SET indicator flashes three times and
turns off.

Operate the device


1 Aim the RM-VZ220 directly at the device.
2 Press the Device Select button for the
device you want to operate.
3 Press POWER to turn on the device.
4 Press buttons on the RM-VZ220 to check that they function.
See Remote Button Descriptions for the functions of buttons for each device.
If the RM-VZ220 does not seemto be working
Check that you have set the correct manufacturers code.
Try repeating the setup procedure using another manufacturers code (if listed for your device).
If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see Searching
for the correct code).
Notes
If the setting is incomplete,
the SET indicator flashes once
and the indicators turn off.
Start again fromthe
beginning.
If no operations are
performed for 10 seconds
while setting, the setting will
be canceled, and must be
restarted.
To cancel the process, press
SET any time. The SET
indicator turns off.
SET
POWER
Device
Select
buttons
Number
buttons
The SET indicator
lights up.
Searching for the correct code
You can set the manufacturers code using the Search function.
1 Power on the device with its power switch.
2 Aimthe RM-VZ220 at the device you want to set.
3 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
4 Enter 9 - 2 - 2 using the number buttons.
The SET indicator flashes three times.
5 Press and hold to start searching.
When the device turns off, release the button.
If you overshoot the required code, you can search for the next or previous
code using the or ~ button.
6 Press .
The SET indicator flashes three times and turns off.
7 Check if the code number works correctly (see Remote Button
Descriptions).
If you still cannot operate the device, repeat steps to search for another
code that works for most functions of your device.
Checking the manufacturers code you have set
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
2 Enter 9 - 3 - 3 using the number buttons.
The SET indicator flashes three times.
3 Press .
4 When the SET indicator starts flashing, count the number of flashes.
Short flash(es) indicate which digit (first, second, etc.), followed by long
flash(es) to indicate the digit number (i.e., 2 long flashes represent the
number 2). 0 is indicated by rapid flashing.
Determine the 5-digit code number this way. To recheck, press .
5 Press SET to finish.
Clearing the automatic power-on control (Sony
devices only)
The Device Select buttons are preset to automatically turn on a device when
pressed.
To cancel the function:
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press , then release both buttons.
2 Enter 9 - 7 - 7 using the number buttons.
The SET indicator flashes three times.
3 Press the desired Device Select button.
The SET indicator flashes three times and turns off.
To set the function again, performthe same procedure above.
Restoring the factory settings
You can clear all the settings and reset the RM-VZ220 to its factory settings.
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press , then release both buttons.
2 Enter 9 - 0 - 0 using the number buttons.
The SET indicator flashes three times.
To cancel, press any button except .
3 Press .
The SET indicator flashes three times and turns off.
Remote Button Descriptions
General
_ SET: Press to set up the RM-VZ220. The indicator lights or flashes while
setting.
_Device Select buttons: Press to select the device to operate.
_GUIDE: Displays the programguide (EPG).
+//+/+/ : Moves the cursor to select a menu item/enters the selected item.
_RETURN: Returns to the previous display/exits the menu.
jVOL +/: Turns the volume up/down.
jPOWER: Turns the selected device on and off.
gMUTING: Mutes the volume. Press again to turn muting off.
gSLEEP: Enables the Sleep function (when available).
The number 5, CH+, and buttons each have a tactile dot for ease of use.
The GUIDE and RETURN buttons do not work for a VCR.
Note on theVOL+/ and MUTINGbuttons
When a TV or other video device is selected, the TVs volume is controlled. When a
DVD Home Theater is selected, its volume can be controlled.
TV
m: VIDEO 1 input
: VIDEO 2 input
: HDMI input
: RGB input
~: (PIP INPUT) Changes the
input mode of the window
picture.
: (PIP) Turns the window
picture on and off.
: (PIP MOVE) Moves the
location of the window picture.
H: (PIP STILL) Freezes the
window picture.
N: (PIP SWAP) Switches between
main and window picture.
_A: Red button
B: Green button
C: Yellow button
D: Blue button
jLIST: (CAPTION) Displays closed
captioning.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
jjg1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: (PIP CH+/) Changes
the channel up/down in the
window picture.
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the options
menu.
gRECALL: Selects the channel
previously selected.
gCH +/: Switches the channel up/
down.
Cable set top box/IPTV
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A, B, C buttons
D: (Live TV) Displays Master
Guide.
jLIST: Displays the title of recorded
program.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
jjg1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: Page up/down
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the options
menu.
gRECALL: Switches between the
current and previous channel.
gCH +/: Switches the channel up/
down.
Satellite receiver
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: Red button
B: Green button
C: Yellow button
D: Blue button
jLIST: Displays the title of recorded
program/PVR menu.
jMENU: Calls up the menu display.
_INPUT: (TV/SAT) Switches the
output between SAT and TV.
jjg1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: Page up/down
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the Satellite
dish menu/Station Index.
gRECALL: Tunes to the last tuned
station.
gCH +/: Switches the channel up/
down.
VCR
~: Rewinds.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j: Ejects a tape.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: (ANT/SW) Switches
the antenna output.
gRECALL: (DRIVE SELECT) Selects
the deck.
gCH +/: Switches the channel up/
down.
gENTER: Enters the selected item.
DVDplayer/recorder
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records (for DVD recorder).
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jLIST: Displays the Title List.
jMENU: Displays the DVD menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +: (DVD) Selects the DVD
drive.
PAGE : (HDD) Selects the
internal HDD (hard disk drive).
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the options
menu.
gRECALL: (DRIVE SELECT)
Switches between HDD and DVD.
gCH +/: Switches the channel up/
down (for DVD recorder).
gENTER: Enters the selected item.
Blu-ray Disc/HD-DVDplayer
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records (for BD recorder).
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jMENU: Displays the Pop-up Menu/
Disc Menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +: (BD) Selects the BD drive.
PAGE : (HDD) Selects the
internal HDD (hard disk drive).
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the options
menu.
gENTER: Enters the selected item.
DVR (digital video recorder)/PVR (personal video recorder)
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: (REPLAY*) Enables the Replay
function for DVR/Replay TV.
B: (Live TV*) Displays Master
Guide.
jLIST: Displays the title of recorded
program.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +/: Page up/down,
Thumbs* up/down
jINFO: (DISPLAY) Displays the
playback information.
gRECALL: Selects the channel
previously selected.
gCH +/: Switches the channel up/
down.
gENTER: Enters the selected item.
* These buttons correspond to TiVo
service or the Replay service. Refer to
its instruction manual for details.
DVDHomeTheater
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jLIST: Enables the SOUND FIELD
function.
jMENU: Displays the DVD menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the amplifier
menu.
gRECALL: (BAND) Selects FM/AM.
gCH +/: Presets or tunes frequency
up/down.
gENTER: Enters the selected item.
Notes on using the RM-VZ220
The RM-VZ220 will not performfunctions that the device is not designed for. For
example, if your TV does not have the muting function, MUTING on the RM-VZ220
will not function with your TV.
The function of the buttons varies depending on settings/operating modes. The table
of Remote Button Descriptions shows how the RM-VZ220 generally operates for
each device in the preset mode.
If your cable set top box can control volume, be sure to set its volume to a moderate
level. If the volume on the cable set top box is turned down completely, you will not be
able to adjust your TVs volume with the RM-VZ220.
Manufacturers Code List /
Lista de cdigos del fabricante
English
The following tables show brand names (Brand) and their corresponding
code numbers (Code No.).
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
2 Enter the manufacturers code.
The SET indicator flashes three times and turns off.
Espaol
La siguiente tabla muestra los nombres de las marcas (Brand) y el nmero
de cdigo correspondiente (Code No.).
1 Presione y mantenga presionado el botn SET durante ms de 3 segundos.
Se encender la luz indicadora SET.
Mientras tiene presionado el botn SET, presione el botn de seleccin de
dispositivo deseado y luego suelte ambos botones.
2 Ingrese el cdigo del fabricante.
El indicador SET parpadear tres veces y se apagar.
Brand Code No.
Acer 01339
Action 00650
Admiral 00463
Akai 00812, 01675, 00702, 02232
Akira 01733
AOC 01365, 01589
Apex Digital 00748
Aventura 00171
Bell & Howell 00154
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial
Solutions
01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Dynex 01463, 01810, 02049
Electroband 00000
Electrograph 01755
Electrohome 00463
Elektra 01661
Element 01687
Emerson 01864, 00154, 00463, 00171,
01661, 01394
Emprex 01765
Envision 01365, 01589
ESA 00812, 00171
Fisher 00154
Funai 00171
Gateway 01755, 01756
GE 01447, 00051, 02359
GFM 00171
Haier 01748, 01749, 02309, 02449
Harman/Kardon 00054
Hisense 00748, 01314, 02098
Hitachi 01643, 02215, 02433
iLo 01684
Infinity 00054
Insignia 01564, 00171, 02049
JBL 00054
JCB 00000
JVC 00731, 01253, 01601, 01774
KDS 01687
Kolin 01331
LG 01423, 02358
LXI 00054, 00154, 00156
MAG 01687
Magnavox 01454, 01866, 00054, 01254,
01365, 02372
Marantz 00054
Matsushita 00650
Maxent 01755
Memorex 00154, 00463, 00150
MGA 00150
Midland 00051
Brand Code No.
Mitsubishi 01250, 00150, 00836
NAD 00156
NEC 01797
NetTV 01755
Norcent 00748, 01365, 01589
Olevia 01610, 01144, 01331
Onida 01253, 02396
Optimus 00154, 00650
Orion 00463, 01463
Panasonic 01480, 00051, 00650
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744,
02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
Quasar 00051, 00650
RadioShack 00154
RCA 01447, 01781, 02187, 02247,
02403, 02429, 02434
Realistic 00154
Sampo 01755
Samsung 00812, 00702
Sansui 00463
Sanyo 00154, 01142
Sceptre 01360, 01599
Scott 01711
Sears 00054, 00154, 00156, 00171
Sharp 00818
Sony 00810, 00000
Spectroniq 01687
Squareview 00171
Superscan 00864
Supreme 00000
SVA 00748
Sylvania 01864, 00054, 00171, 01314,
01394
Symphonic 00171
Syntax 01610, 01144, 01331
Tatung 01756
TCL 02403, 02429
Technics 00051
Techwood 00051
Teknika 00054, 00150
Telefunken 00702
Toshiba 01524, 00154, 00156, 00650
TVS 00463
Venturer 01865
Videocon 01540, 01541, 02436
Vidikron 00054
Viewsonic 01755, 00864, 00885, 01627,
01742
Viore 01684, 02104, 02352
Vizio 01758, 00864, 00885, 01756
VU 02098
TV/ TV
Brand Code No.
Wards 00054
Waycon 00156
Westinghouse 01712, 00885, 01577
White
Westinghouse
00463, 01661
Wyse 01365
Zenith 00463, 01661
Brand Code No.
Accurian 10675
Akai 10695
Allegro 10869
Apex Digital 10672, 11056
Bel Canto Design 11571
Broksonic 10695
CineVision 10869
Citizen 10695
CyberHome 11024
Daewoo 10869
Denon 10490, 11634, 12258
Disney 10675, 11270
Emerson 10591, 10675
Enterprise 10591
Funai 10675
GE 10522
GFM 10675
Go Video 10744, 10741, 10869, 11044,
11075
GoldStar 10741
Harman/Kardon 11229
Hitachi 10573, 10664
Hiteker 10672
Insignia 10675, 12428, 12596
Integra 11769, 10627, 12147
JVC 10623, 10867, 11164
Kenwood 10490
LG 10591, 10741, 10869
Magnavox 10503, 10539, 10646, 10675,
11354
Marantz 10539, 12414, 12432
Memorex 10695, 11270, 12213
Microsoft 10522, 12083
Mitsubishi 11521
NAD 10741, 12572
Olevia 12331
Onkyo 10503, 11769, 10627, 11627,
12147
Brand Code No.
Oppo 10575, 12545
Panasonic 10490, 11579, 11641
Philco 10675
Philips 10503, 10539, 12056, 12084,
10646, 10675, 11267, 11354,
12434
Pioneer 10142, 10631, 11571, 12442
Polk Audio 10539
Presidian 10675
Proscan 10522
RCA 10522, 11769, 10822, 12213,
12587, 12592, 12594
Rio 10869
Rotel 10623
Samsung 10490, 10573, 10199, 11044,
11075, 12329, 12489
Sansui 10695
Sanyo 10695
Sharp 10630, 10675, 12250
Shinsonic 10533
Sonic Blue 10869
Sony 11633, 10533, 10864, 11033,
11070, 11431, 11516
Sylvania 10675
Symphonic 10675
TCL 12587
Technics 10490
Tivo 11503
Toshiba 10503, 11769, 10695, 11154,
11503, 12006, 12277
Urban Concepts 10503
Viore 12553
Vizio 12563
Vtrek 12587
Xbox 10522, 12083
Yamaha 10490, 10539, 10497, 10817,
12298
Zenith 10503, 10591, 10741, 10869
DVDplayer / Reproductor de DVD
Brand Code No.
Accurian 10675
Apex Digital 11056
Funai 10675
Go Video 10741
JVC 11164
LG 10741
Magnavox 10646, 10675
Panasonic 10490, 11579
Philips 10646
Brand Code No.
Pioneer 10631
RCA 10522
Samsung 10490
Sharp 10675
Sony 11033, 11070, 11431
Sylvania 10675
Toshiba 12277
Zenith 10741
DVDrecorder / Grabadora de DVD
Blu-ray Disc/HD-DVDplayer/
Reproductor de Blu-ray Disc/HD-DVD
Brand Code No.
Denon 12258
Insignia 10675, 12428, 12596
Integra 11769, 12147
LG 10741
Magnavox 10675
Marantz 12414, 12432
Microsoft 12083
NAD 12572
Olevia 12331
Onkyo 11769, 12147
Oppo 12545
Panasonic 11641
Brand Code No.
Philips 12084, 12434
Pioneer 10142, 12442
RCA 11769
Samsung 10199
Sharp 12250
Sony 11516
Sylvania 10675
Toshiba 11769
Viore 12553
Vizio 12563
Xbox 12083
Yamaha 12298
If your device is not listed, try the Search function (see Searching for the correct code).
2 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press
the desired Device Select button,
then release both buttons.
3 Enter the manufacturers code (01454).
The SET indicator flashes three times and
turns off.

Operate the device


1 Aim the RM-VZ220 directly at the device.
2 Press the Device Select button for the
device you want to operate.
3 Press POWER to turn on the device.
4 Press buttons on the RM-VZ220 to check that they function.
See Remote Button Descriptions for the functions of buttons for each device.
If the RM-VZ220 does not seemto be working
Check that you have set the correct manufacturers code.
Try repeating the setup procedure using another manufacturers code (if listed for your device).
If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see Searching
for the correct code).
Notes
If the setting is incomplete,
the SET indicator flashes once
and the indicators turn off.
Start again fromthe
beginning.
If no operations are
performed for 10 seconds
while setting, the setting will
be canceled, and must be
restarted.
To cancel the process, press
SET any time. The SET
indicator turns off.
SET
POWER
Device
Select
buttons
Number
buttons
The SET indicator
lights up.
Searching for the correct code
You can set the manufacturers code using the Search function.
1 Power on the device with its power switch.
2 Aimthe RM-VZ220 at the device you want to set.
3 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
4 Enter 9 - 2 - 2 using the number buttons.
The SET indicator flashes three times.
5 Press and hold to start searching.
When the device turns off, release the button.
If you overshoot the required code, you can search for the next or previous
code using the or ~ button.
6 Press .
The SET indicator flashes three times and turns off.
7 Check if the code number works correctly (see Remote Button
Descriptions).
If you still cannot operate the device, repeat steps to search for another
code that works for most functions of your device.
Checking the manufacturers code you have set
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
2 Enter 9 - 3 - 3 using the number buttons.
The SET indicator flashes three times.
3 Press .
4 When the SET indicator starts flashing, count the number of flashes.
Short flash(es) indicate which digit (first, second, etc.), followed by long
flash(es) to indicate the digit number (i.e., 2 long flashes represent the
number 2). 0 is indicated by rapid flashing.
Determine the 5-digit code number this way. To recheck, press .
5 Press SET to finish.
Clearing the automatic power-on control (Sony
devices only)
The Device Select buttons are preset to automatically turn on a device when
pressed.
To cancel the function:
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press , then release both buttons.
2 Enter 9 - 7 - 7 using the number buttons.
The SET indicator flashes three times.
3 Press the desired Device Select button.
The SET indicator flashes three times and turns off.
To set the function again, performthe same procedure above.
Restoring the factory settings
You can clear all the settings and reset the RM-VZ220 to its factory settings.
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press , then release both buttons.
2 Enter 9 - 0 - 0 using the number buttons.
The SET indicator flashes three times.
To cancel, press any button except .
3 Press .
The SET indicator flashes three times and turns off.
Remote Button Descriptions
General
_ SET: Press to set up the RM-VZ220. The indicator lights or flashes while
setting.
_Device Select buttons: Press to select the device to operate.
_GUIDE: Displays the programguide (EPG).
+//+/+/ : Moves the cursor to select a menu item/enters the selected item.
_RETURN: Returns to the previous display/exits the menu.
jVOL +/: Turns the volume up/down.
jPOWER: Turns the selected device on and off.
gMUTING: Mutes the volume. Press again to turn muting off.
gSLEEP: Enables the Sleep function (when available).
The number 5, CH+, and buttons each have a tactile dot for ease of use.
The GUIDE and RETURN buttons do not work for a VCR.
Note on theVOL+/ and MUTINGbuttons
When a TV or other video device is selected, the TVs volume is controlled. When a
DVD Home Theater is selected, its volume can be controlled.
TV
m: VIDEO 1 input
: VIDEO 2 input
: HDMI input
: RGB input
~: (PIP INPUT) Changes the
input mode of the window
picture.
: (PIP) Turns the window
picture on and off.
: (PIP MOVE) Moves the
location of the window picture.
H: (PIP STILL) Freezes the
window picture.
N: (PIP SWAP) Switches between
main and window picture.
_A: Red button
B: Green button
C: Yellow button
D: Blue button
jLIST: (CAPTION) Displays closed
captioning.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
jjg1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: (PIP CH+/) Changes
the channel up/down in the
window picture.
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the options
menu.
gRECALL: Selects the channel
previously selected.
gCH +/: Switches the channel up/
down.
Cable set top box/IPTV
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A, B, C buttons
D: (Live TV) Displays Master
Guide.
jLIST: Displays the title of recorded
program.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
jj g1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: Page up/down
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the options
menu.
gRECALL: Switches between the
current and previous channel.
gCH +/: Switches the channel up/
down.
Satellite receiver
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: Red button
B: Green button
C: Yellow button
D: Blue button
jLIST: Displays the title of recorded
program/PVR menu.
jMENU: Calls up the menu display.
_INPUT: (TV/SAT) Switches the
output between SAT and TV.
jj g1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: Page up/down
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the Satellite
dish menu/Station Index.
gRECALL: Tunes to the last tuned
station.
gCH +/: Switches the channel up/
down.
VCR
~: Rewinds.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j: Ejects a tape.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: (ANT/SW) Switches
the antenna output.
gRECALL: (DRIVE SELECT) Selects
the deck.
gCH +/: Switches the channel up/
down.
gENTER: Enters the selected item.
DVDplayer/recorder
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records (for DVD recorder).
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jLIST: Displays the Title List.
jMENU: Displays the DVD menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +: (DVD) Selects the DVD
drive.
PAGE : (HDD) Selects the
internal HDD (hard disk drive).
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the options
menu.
gRECALL: (DRIVE SELECT)
Switches between HDD and DVD.
gCH +/: Switches the channel up/
down (for DVD recorder).
gENTER: Enters the selected item.
Blu-ray Disc/HD-DVDplayer
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records (for BD recorder).
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jMENU: Displays the Pop-up Menu/
Disc Menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +: (BD) Selects the BD drive.
PAGE : (HDD) Selects the
internal HDD (hard disk drive).
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the options
menu.
gENTER: Enters the selected item.
DVR (digital video recorder)/PVR (personal video recorder)
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: (REPLAY*) Enables the Replay
function for DVR/Replay TV.
B: (Live TV*) Displays Master
Guide.
jLIST: Displays the title of recorded
program.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +/: Page up/down,
Thumbs* up/down
jINFO: (DISPLAY) Displays the
playback information.
gRECALL: Selects the channel
previously selected.
gCH +/: Switches the channel up/
down.
gENTER: Enters the selected item.
* These buttons correspond to TiVo
service or the Replay service. Refer to
its instruction manual for details.
DVDHomeTheater
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jLIST: Enables the SOUND FIELD
function.
jMENU: Displays the DVD menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the amplifier
menu.
gRECALL: (BAND) Selects FM/AM.
gCH +/: Presets or tunes frequency
up/down.
gENTER: Enters the selected item.
Notes on using the RM-VZ220
The RM-VZ220 will not performfunctions that the device is not designed for. For
example, if your TV does not have the muting function, MUTING on the RM-VZ220
will not function with your TV.
The function of the buttons varies depending on settings/operating modes. The table
of Remote Button Descriptions shows how the RM-VZ220 generally operates for
each device in the preset mode.
If your cable set top box can control volume, be sure to set its volume to a moderate
level. If the volume on the cable set top box is turned down completely, you will not be
able to adjust your TVs volume with the RM-VZ220.
Manufacturers Code List /
Lista de cdigos del fabricante
English
The following tables show brand names (Brand) and their corresponding
code numbers (Code No.).
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
2 Enter the manufacturers code.
The SET indicator flashes three times and turns off.
Espaol
La siguiente tabla muestra los nombres de las marcas (Brand) y el nmero
de cdigo correspondiente (Code No.).
1 Presione y mantenga presionado el botn SET durante ms de 3 segundos.
Se encender la luz indicadora SET.
Mientras tiene presionado el botn SET, presione el botn de seleccin de
dispositivo deseado y luego suelte ambos botones.
2 Ingrese el cdigo del fabricante.
El indicador SET parpadear tres veces y se apagar.
Brand Code No.
Acer 01339
Action 00650
Admiral 00463
Akai 00812, 01675, 00702, 02232
Akira 01733
AOC 01365, 01589
Apex Digital 00748
Aventura 00171
Bell & Howell 00154
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial
Solutions
01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Dynex 01463, 01810, 02049
Electroband 00000
Electrograph 01755
Electrohome 00463
Elektra 01661
Element 01687
Emerson 01864, 00154, 00463, 00171,
01661, 01394
Emprex 01765
Envision 01365, 01589
ESA 00812, 00171
Fisher 00154
Funai 00171
Gateway 01755, 01756
GE 01447, 00051, 02359
GFM 00171
Haier 01748, 01749, 02309, 02449
Harman/Kardon 00054
Hisense 00748, 01314, 02098
Hitachi 01643, 02215, 02433
iLo 01684
Infinity 00054
Insignia 01564, 00171, 02049
JBL 00054
JCB 00000
JVC 00731, 01253, 01601, 01774
KDS 01687
Kolin 01331
LG 01423, 02358
LXI 00054, 00154, 00156
MAG 01687
Magnavox 01454, 01866, 00054, 01254,
01365, 02372
Marantz 00054
Matsushita 00650
Maxent 01755
Memorex 00154, 00463, 00150
MGA 00150
Midland 00051
Brand Code No.
Mitsubishi 01250, 00150, 00836
NAD 00156
NEC 01797
NetTV 01755
Norcent 00748, 01365, 01589
Olevia 01610, 01144, 01331
Onida 01253, 02396
Optimus 00154, 00650
Orion 00463, 01463
Panasonic 01480, 00051, 00650
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744,
02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
Quasar 00051, 00650
RadioShack 00154
RCA 01447, 01781, 02187, 02247,
02403, 02429, 02434
Realistic 00154
Sampo 01755
Samsung 00812, 00702
Sansui 00463
Sanyo 00154, 01142
Sceptre 01360, 01599
Scott 01711
Sears 00054, 00154, 00156, 00171
Sharp 00818
Sony 00810, 00000
Spectroniq 01687
Squareview 00171
Superscan 00864
Supreme 00000
SVA 00748
Sylvania 01864, 00054, 00171, 01314,
01394
Symphonic 00171
Syntax 01610, 01144, 01331
Tatung 01756
TCL 02403, 02429
Technics 00051
Techwood 00051
Teknika 00054, 00150
Telefunken 00702
Toshiba 01524, 00154, 00156, 00650
TVS 00463
Venturer 01865
Videocon 01540, 01541, 02436
Vidikron 00054
Viewsonic 01755, 00864, 00885, 01627,
01742
Viore 01684, 02104, 02352
Vizio 01758, 00864, 00885, 01756
VU 02098
TV/ TV
Brand Code No.
Wards 00054
Waycon 00156
Westinghouse 01712, 00885, 01577
White
Westinghouse
00463, 01661
Wyse 01365
Zenith 00463, 01661
Brand Code No.
Accurian 10675
Akai 10695
Allegro 10869
Apex Digital 10672, 11056
Bel Canto Design 11571
Broksonic 10695
CineVision 10869
Citizen 10695
CyberHome 11024
Daewoo 10869
Denon 10490, 11634, 12258
Disney 10675, 11270
Emerson 10591, 10675
Enterprise 10591
Funai 10675
GE 10522
GFM 10675
Go Video 10744, 10741, 10869, 11044,
11075
GoldStar 10741
Harman/Kardon 11229
Hitachi 10573, 10664
Hiteker 10672
Insignia 10675, 12428, 12596
Integra 11769, 10627, 12147
JVC 10623, 10867, 11164
Kenwood 10490
LG 10591, 10741, 10869
Magnavox 10503, 10539, 10646, 10675,
11354
Marantz 10539, 12414, 12432
Memorex 10695, 11270, 12213
Microsoft 10522, 12083
Mitsubishi 11521
NAD 10741, 12572
Olevia 12331
Onkyo 10503, 11769, 10627, 11627,
12147
Brand Code No.
Oppo 10575, 12545
Panasonic 10490, 11579, 11641
Philco 10675
Philips 10503, 10539, 12056, 12084,
10646, 10675, 11267, 11354,
12434
Pioneer 10142, 10631, 11571, 12442
Polk Audio 10539
Presidian 10675
Proscan 10522
RCA 10522, 11769, 10822, 12213,
12587, 12592, 12594
Rio 10869
Rotel 10623
Samsung 10490, 10573, 10199, 11044,
11075, 12329, 12489
Sansui 10695
Sanyo 10695
Sharp 10630, 10675, 12250
Shinsonic 10533
Sonic Blue 10869
Sony 11633, 10533, 10864, 11033,
11070, 11431, 11516
Sylvania 10675
Symphonic 10675
TCL 12587
Technics 10490
Tivo 11503
Toshiba 10503, 11769, 10695, 11154,
11503, 12006, 12277
Urban Concepts 10503
Viore 12553
Vizio 12563
Vtrek 12587
Xbox 10522, 12083
Yamaha 10490, 10539, 10497, 10817,
12298
Zenith 10503, 10591, 10741, 10869
DVDplayer / Reproductor de DVD
Brand Code No.
Accurian 10675
Apex Digital 11056
Funai 10675
Go Video 10741
JVC 11164
LG 10741
Magnavox 10646, 10675
Panasonic 10490, 11579
Philips 10646
Brand Code No.
Pioneer 10631
RCA 10522
Samsung 10490
Sharp 10675
Sony 11033, 11070, 11431
Sylvania 10675
Toshiba 12277
Zenith 10741
DVDrecorder / Grabadora de DVD
Blu-ray Disc/HD-DVDplayer/
Reproductor de Blu-ray Disc/HD-DVD
Brand Code No.
Denon 12258
Insignia 10675, 12428, 12596
Integra 11769, 12147
LG 10741
Magnavox 10675
Marantz 12414, 12432
Microsoft 12083
NAD 12572
Olevia 12331
Onkyo 11769, 12147
Oppo 12545
Panasonic 11641
Brand Code No.
Philips 12084, 12434
Pioneer 10142, 12442
RCA 11769
Samsung 10199
Sharp 12250
Sony 11516
Sylvania 10675
Toshiba 11769
Viore 12553
Vizio 12563
Xbox 12083
Yamaha 12298
Espaol
Para los clientes de EE. UU.
ADVERTENCIA
Este equipo ha sido probado y se ha encontrado que cumple con los lmites para
dispositivos digitales de Clase B, de acuerdo con la Parte 15 de las normas de la FCC.
Estos lmites han sido diseados para proporcionar una proteccin razonable contra
interferencias perjudiciales en una instalacin residencial.
Este equipo genera, usa y puede emitir energa de radiofrecuencia y, si no se instala y
utiliza de acuerdo con las instrucciones, puede provocar interferencias perjudiciales en
las radiocomunicaciones. Sin embargo, no existe ninguna garanta de que tales
interferencias no se produzcan en una instalacin particular. Si este equipo llega a
producir interferencias dainas en la recepcin por radio o TV, lo que podr
comprobarse encendiendo y apagando el aparato, se recomienda al usuario que intente
corregir la interferencia tocontrol remoto una o ms de las siguientes medidas:
Reorientacin o reubicacin de la antena receptora.
Aumento de la separacin entre el equipo y el receptor.
Conexin del equipo a un tomacorriente diferente del utilizado por el receptor.
Solicitud de ayuda al proveedor o a un tcnico de radio/televisin experimentado.
Tenga en cuenta que cualquier cambio o modificacin que no se apruebe expresamente
en este manual puede anular su derecho a utilizar este equipo.
Configuracin del RM-VZ220
El RM-VZ220 est configurado de fbrica para funcionar con los
dispositivos de video de la marca Sony en cualquiera de los botones de
seleccin de dispositivos (consulte la tabla a continuacin).
Para usar los dispositivos que no sean marca Sony, o dispositivos marca Sony
que no vengan configurados de fbrica, establezca el cdigo del fabricante de
cada dispositivo.
Dispositivos Botn Configuracin de
fbrica*
TV TV Televisor Sony (00810)
TV, decodificador de cable,
receptor de satllite, IPTV,
reproductor de DVD, grabadora
de DVD, reproductor de Blu-ray
Disc, DVR (videograbadora
digital), PVR (videograbadora
personal), VCR, DVD con cine en
casa
CBL (SAT) Decodificador de cable
(no de marca Sony)
(51376)
VCR VCR Sony (60032)
DVD Reproductor de DVD
Sony (11033)
* El cdigo de cinco dgitos es el cdigo establecido por el fabricante.
Nota
Solamente se puede asignar un TV al botn de seleccin de dispositivos del TV. Puede
asignar cualquier dispositivo a los otros botones de seleccin de dispositivos.
Instalacin de las bateras
Abra el compartimiento de las bateras e inserte dos bateras tamao AA
(R6) secas (no incluidas).
Inserte las bateras (primero el lado negativo) en el compartimiento tal como
se muestra abajo.
1 2
Vida til de la batera
En condiciones normales, las bateras secas alcalinas AA (LR6) pueden
durar hasta un ao. Si el RM-VZ220 no funciona apropiadamente, las
bateras pueden descargarse. Si ocurriera esto, reemplace ambas bateras con
un par nuevo.
Notas
Reemplace las bateras por nuevas dentro de los dos minutos, y no presione ningn
botn mientras las reemplaza. De hacerlo, se pueden borrar las configuraciones de los
cdigos.
No usar una batera vieja con una nueva, ni usar diferentes tipos de bateras juntos.
Si se derraman los electrolitos contenidos dentro de la batera, limpie el rea
contaminada del compartimiento de las bateras con un pao y reemplace las bateras
viejas con nuevas. Para evitar los derrames de electrolitos, quite las bateras si tiene
planeado no utilizar el RM-VZ220 durante un perodo de tiempo prolongado.
Especificaciones
Distancia de operacin Aproximadamente 11 m(36 pies) (vara segn los
dispositivos de los diferentes fabricantes)
Requisitos de alimentacin
Dos bateras secas de tamao AA (R6) (no incluidas)
Vida til de la batera Aproximadamente 1 ao cuando se utilizan bateras alcalinas
de tamao AA (LR6) (vara de acuerdo con la frecuencia del
uso de los botones, hasta un uso aproximado de 300 veces
por da.)
Dimensiones Aproximadamente 53 213 27 mm
(2 1/8 8 1/2 1 1/8 pulgadas) (a h d)
Peso Aproximadamente 100 g (3,5 onzas) (sin incluir las bateras)
El diseo y las especificaciones estn sujetos a cambios sin previo aviso.
Solucin de problemas
Si tiene problemas con la configuracin o el funcionamiento del RM-VZ220:
Realice con cuidado el procedimiento de configuracin de la Gua de configuracin.
Si el RM-VZ220 no funciona, intente repetir el procedimiento de configuracin con
otro cdigo de fabricante (si hay otros en la enumeracin de cdigos de su
dispositivo). Si sigue sin poder operar el RM-VZ220, intente con la funcin Bsqueda
(consulte Bsqueda del cdigo del fabricante).
Apunte el RM-VZ220 directamente al dispositivo.
Quite cualquier obstculo en el camino entre el RM-VZ220 y el dispositivo.
Asegrese de haber presionado el botn de seleccin de dispositivo correcto.
Controle que el dispositivo tenga capacidad para infrarrojo de control remoto. Por
ejemplo, si su dispositivo no inclua un control remoto, probablemente no sea capaz
de ser controlado por el RM-VZ220.
Las bateras estn agotadas o no estn insertadas correctamente. Reemplcelas por
nuevas o insrtelas correctamente.
Para clientes en EE. UU.
Informacin de asistencia al cliente
Luego de leer este manual, si todava no puede lograr que el RM-VZ220 funcione
apropiadamente, llame a la Lnea de ayuda de asistencia al cliente de Sony
al 1-800-822-2217.
Gua de configuracin
Esta gua muestra la configuracin y uso del RM-VZ220 para operar sus dispositivos.
Si su dispositivo Sony ya ha sido configurado, consulte Funcionamiento del dispositivo.
Establezca el cdigo del fabricante
Ejemplo: Para usar un televisor Philips
1 Encuentre el cdigo del fabricante en la Lista de cdigos del fabricante.
RM-VZ220_U [US,ES] 4-170-642-12(1) RM-VZ220_U [US,ES] 4-170-642-12(1)
4-170-642-12(1)
Remote Commander RM-VZ220 2010 Sony Corporation Printed in China
Operating Instructions Manual de instrucciones (parte posterior)
English
For the Customers in the U.S.A. WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Setting Up the RM-VZ220 The RM-VZ220 is preset at the factory to operate Sony brand video devices set to any of the Device Select buttons (see the table below). To use with non-Sony devices, or Sony devices that are not preset at the factory, set the manufacturers code for each device. Devices Button Factory setting* TV TV Sony TV (00810) TV, Cable set top box, Satellite receiver, IPTV, DVD player, DVD recorder, Blu-ray Disc player, DVR (digital video recorder), PVR (personal video recorder), VCR, DVD Home Theater
CBL (SAT) Cable set top box (non- Sony) (51376) VCR Sony VCR (60032) DVD Sony DVD player (11033) * The five-digit code is the preset manufacturers code. Note Only a TV can be assigned to the TV Device Select button. You can assign any device to the other Device Select buttons.
Installing the batteries Slide open the battery compartment and insert two size AA (R6) dry batteries (not supplied). Insert the batteries (negative end first) through the guide clamp within each compartment as shown below. 1 2
Battery life Under normal conditions, size AA (LR6) alkaline batteries will last up to one year. If the RM-VZ220 does not operate properly, the batteries might be drained. Replace both batteries with new ones. Notes Replace the batteries within 2 minutes after removing them, and do not press any button when replacing the batteries. Otherwise, your code settings may be cleared. Do not use an old battery with a new one, or mix different types of batteries together. If the electrolyte inside the battery should leak, wipe the contaminated area of the battery compartment with a cloth and replace the old batteries with new ones. To prevent electrolyte fromleaking, remove the batteries when you plan not to use the RM-VZ220 for a long period of time.
Specifications Operating distance Approx. 11 m(36 ft) (varies depending on devices of different manufacturers) Power requirements Two size AA (R6) dry batteries (not supplied) Battery life Approx. 1 year when using size AA (LR6) alkaline batteries (varies depending on frequency of button use - up to approx. 300 times per day.) Dimensions Approx. 53 213 27 mm(2 1/8 8 1/2 1 1/8 in.) (w/h/d) Mass Approx. 100 g (3.5 oz) (not including batteries) Design and specifications are subject to change without notice.
Troubleshooting If you have problems setting up or using the RM-VZ220: Carefully performthe setup procedure of Startup Guide. If the RM-VZ220 does not work, try repeating the setup procedure using another manufacturers code (if listed for your device). If you still cannot operate the RM-VZ220, try the Search function (see Searching for the correct code). Aimthe RM-VZ220 directly at the device. Remove any obstacles in the path between the RM-VZ220 and the device. Make sure you have pressed the correct Device Select button. Check that the device has infrared remote capability. For example, if your device did not come with a remote control, it probably is not capable of being controlled by the RM-VZ220. The batteries are weak, or not inserted correctly. Replace themwith new ones or insert them correctly. For the customers in the U.S.A. Customer Support Information After you have read through this manual, if you still cannot get the RM-VZ220 to work properly, call the Sony Customer Support Helpline at 1-800-822-2217.
Startup Guide This guide shows you howto set up and use the RM-VZ220 to operate your devices. If your Sony device has already been preset, see Operate the device. Set the manufacturers code Example: To set up a Philips TV 1 Find the manufacturers code in Manufacturers Code List. Manufacturers Code List / Lista de cdigos del fabricante English The following tables show brand names (Brand) and their corresponding code numbers (Code No.). 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 2 Enter the manufacturers code. The SET indicator flashes three times and turns off. Espaol La siguiente tabla muestra los nombres de las marcas (Brand) y el nmero de cdigo correspondiente (Code No.). 1 Presione y mantenga presionado el botn SET durante ms de 3 segundos. Se encender la luz indicadora SET. Mientras tiene presionado el botn SET, presione el botn de seleccin de dispositivo deseado y luego suelte ambos botones. 2 Ingrese el cdigo del fabricante. El indicador SET parpadear tres veces y se apagar. Brand Code No. Sony 00810, 00000 Acer 01339 Action 00650 Admiral 00463 Akai 00812, 01675, 00702, 02232 Akira 01733 AOC 01365, 01589 Apex Digital 00748 Aventura 00171 Bell & Howell 00154 BPL 01543 Broksonic 00463 Carver 00054 Celebrity 00000 Coby 02306, 02345, 02348 Commercial Solutions 01447 Crosley 00054 Curtis 02352 Curtis Mathes 00054, 00154, 00702, 01661 Daewoo 01661 Digital Lifestyles 01765 Durabrand 00463, 00171 Dynex 01463, 01810, 02049 Electroband 00000 Electrograph 01755 Electrohome 00463 Elektra 01661 Element 01687 Emerson 01864, 00154, 00463, 00171, 01661, 01394 Emprex 01765 Envision 01365, 01589 ESA 00812, 00171 Fisher 00154 Funai 00171 Gateway 01755, 01756 GE 01447, 00051, 02359 GFM 00171 Haier 01748, 01749, 02309, 02449 Harman/Kardon 00054 Hisense 00748, 01314, 02098 Hitachi 01643, 02215, 02433 iLo 01684 Infinity 00054 Insignia 01564, 00171, 02049 JBL 00054 JCB 00000 JVC 00731, 01253, 01601, 01774 KDS 01687 Kolin 01331 LG 01423, 02358 LXI 00054, 00154, 00156 MAG 01687 Magnavox 01454, 01866, 00054, 01254, 01365, 02372 Marantz 00054 Matsushita 00650 Maxent 01755 Memorex 00154, 00463, 00150 MGA 00150
Brand Code No. Midland 00051 Mitsubishi 01250, 00150, 00836 NAD 00156 NEC 01797 NetTV 01755 Norcent 00748, 01365, 01589 Olevia 01610, 01144, 01331 Onida 01253, 02396 Optimus 00154, 00650 Orion 00463, 01463 Panasonic 01480, 00051, 00650 PARK 02104 Penney 00156, 00051 Petters 01523 Philco 00054 Philips 01454, 00054, 00690, 01744, 02372 Pioneer 01457, 01260 Polaroid 01523, 01276, 01314, 01687 Portland 01661 Prism 00051 Proscan 01447, 02147, 02256 Proview 01687 Quasar 00051, 00650 RadioShack 00154 RCA 01447, 01781, 02187, 02247, 02403, 02429, 02434 Realistic 00154 Sampo 01755 Samsung 00812, 00702 Sansui 00463 Sanyo 00154, 01142 Sceptre 01360, 01599 Scott 01711 Sears 00054, 00154, 00156, 00171 Sharp 00818 Spectroniq 01687 Squareview 00171 Superscan 00864 Supreme 00000 SVA 00748 Sylvania 01864, 00054, 00171, 01314, 01394 Symphonic 00171 Syntax 01610, 01144, 01331 Tatung 01756 TCL 02403, 02429 Technics 00051 Techwood 00051 Teknika 00054, 00150 Telefunken 00702 Toshiba 01524, 00154, 00156, 00650 TVS 00463 Venturer 01865 Videocon 01540, 01541, 02436 Vidikron 00054 Viewsonic 01755, 00864, 00885, 01627, 01742 Viore 01684, 02104, 02352 Vizio 01758, 00864, 00885, 01756 VU 02098
TV/ TV
Brand Code No. Wards 00054 Waycon 00156 Westinghouse 01712, 00885, 01577 White Westinghouse 00463, 01661 Wyse 01365 Zenith 00463, 01661 Brand Code No. Sony 11633, 10533, 10864, 11033, 11070, 11431, 11516 Accurian 10675 Akai 10695 Allegro 10869 Apex Digital 10672, 11056 Bel Canto Design 11571 Broksonic 10695 CineVision 10869 Citizen 10695 CyberHome 11024 Daewoo 10869 Denon 10490, 11634, 12258 Disney 10675, 11270 Emerson 10591, 10675 Enterprise 10591 Funai 10675 GE 10522 GFM 10675 Go Video 10744, 10741, 10869, 11044, 11075 GoldStar 10741 Harman/Kardon 11229 Hitachi 10573, 10664 Hiteker 10672 Insignia 10675, 12428, 12596 Integra 11769, 10627, 12147 JVC 10623, 10867, 11164 Kenwood 10490 LG 10591, 10741, 10869 Magnavox 10503, 10539, 10646, 10675, 11354 Marantz 10539, 12414, 12432 Memorex 10695, 11270, 12213 Microsoft 10522, 12083 Mitsubishi 11521 NAD 10741, 12572 Olevia 12331
Brand Code No. Onkyo 10503, 11769, 10627, 11627, 12147 Oppo 10575, 12545 Panasonic 10490, 11579, 11641 Philco 10675 Philips 10503, 10539, 12056, 12084, 10646, 10675, 11267, 11354, 12434 Pioneer 10142, 10631, 11571, 12442 Polk Audio 10539 Presidian 10675 Proscan 10522 RCA 10522, 11769, 10822, 12213, 12587, 12592, 12594 Rio 10869 Rotel 10623 Samsung 10490, 10573, 10199, 11044, 11075, 12329, 12489 Sansui 10695 Sanyo 10695 Sharp 10630, 10675, 12250 Shinsonic 10533 Sonic Blue 10869 Sylvania 10675 Symphonic 10675 TCL 12587 Technics 10490 Tivo 11503 Toshiba 10503, 11769, 10695, 11154, 11503, 12006, 12277 Urban Concepts 10503 Viore 12553 Vizio 12563 Vtrek 12587 Xbox 10522, 12083 Yamaha 10490, 10539, 10497, 10817, 12298 Zenith 10503, 10591, 10741, 10869
DVDplayer / Reproductor de DVD
Brand Code No. Sony 11033, 11070, 11431 Accurian 10675 Apex Digital 11056 Funai 10675 Go Video 10741 JVC 11164 LG 10741 Magnavox 10646, 10675 Panasonic 10490, 11579 Brand Code No. Philips 10646 Pioneer 10631 RCA 10522 Samsung 10490 Sharp 10675 Sylvania 10675 Toshiba 12277 Zenith 10741 DVDrecorder / Grabadora de DVD Blu-ray Disc/HD-DVDplayer/ Reproductor de Blu-ray Disc/HD-DVD Brand Code No. Sony 11516 Denon 12258 Insignia 10675, 12428, 12596 Integra 11769, 12147 LG 10741 Magnavox 10675 Marantz 12414, 12432 Microsoft 12083 NAD 12572 Olevia 12331 Onkyo 11769, 12147 Oppo 12545 Brand Code No. Panasonic 11641 Philips 12084, 12434 Pioneer 10142, 12442 RCA 11769 Samsung 10199 Sharp 12250 Sylvania 10675 Toshiba 11769 Viore 12553 Vizio 12563 Xbox 12083 Yamaha 12298
Brand Code No. Sony 00810, 00000 Acer 01339 Action 00650 Brand Code No. Midland 00051 Mitsubishi 01250, 00150, 00836 NAD 00156
TV/ TV
BPL 01543 Broksonic 00463 Carver 00054 Celebrity 00000 Coby 02306, 02345, 02348 Commercial Solutions 01447 Crosley 00054 Curtis 02352 Curtis Mathes 00054, 00154, 00702, 01661 Daewoo 01661 Digital Lifestyles 01765 Durabrand 00463, 00171
Panasonic 01480, 00051, 00650 PARK 02104 Penney 00156, 00051 Petters 01523 Philco 00054 Philips 01454, 00054, 00690, 01744, 02372 Pioneer 01457, 01260 Polaroid 01523, 01276, 01314, 01687 Portland 01661 Prism 00051 Proscan 01447, 02147, 02256 Proview 01687 If your device is not listed, try the Search function (see Searching for the correct code). 2 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 3 Enter the manufacturers code (01454). The SET indicator flashes three times and turns off.
Operate the device
1 Aim the RM-VZ220 directly at the device. 2 Press the Device Select button for the device you want to operate.
3 Press POWER to turn on the device.
4 Press buttons on the RM-VZ220 to check that they function. See Remote Button Descriptions for the functions of buttons for each device.
If the RM-VZ220 does not seemto be working Check that you have set the correct manufacturers code. Try repeating the setup procedure using another manufacturers code (if listed for your device). If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see Searching for the correct code).
Notes If the setting is incomplete, the SET indicator flashes once and the indicators turn off. Start again fromthe beginning. If no operations are performed for 10 seconds while setting, the setting will be canceled, and must be restarted. To cancel the process, press SET any time. The SET indicator turns off.
SET POWER Device Select buttons
Number buttons
The SET indicator lights up.
Searching for the correct code You can set the manufacturers code using the Search function. 1 Power on the device with its power switch. 2 Aimthe RM-VZ220 at the device you want to set. 3 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 4 Enter 9 - 2 - 2 using the number buttons. The SET indicator flashes three times. 5 Press and hold to start searching. When the device turns off, release the button. If you overshoot the required code, you can search for the next or previous code using the or ~button. 6 Press . The SET indicator flashes three times and turns off. 7 Check if the code number works correctly (see Remote Button Descriptions). If you still cannot operate the device, repeat steps to search for another code that works for most functions of your device. Checking the manufacturers code you have set 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 2 Enter 9 - 3 - 3 using the number buttons. The SET indicator flashes three times. 3 Press . 4 When the SET indicator starts flashing, count the number of flashes. Short flash(es) indicate which digit (first, second, etc.), followed by long flash(es) to indicate the digit number (i.e., 2 long flashes represent the number 2). 0 is indicated by rapid flashing. Determine the 5-digit code number this way. To recheck, press . 5 Press SET to finish. Clearing the automatic power-on control (Sony devices only) The Device Select buttons are preset to automatically turn on a device when pressed. To cancel the function: 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press , then release both buttons. 2 Enter 9 - 7 - 7 using the number buttons. The SET indicator flashes three times. 3 Press the desired Device Select button. The SET indicator flashes three times and turns off. To set the function again, performthe same procedure above. Restoring the factory settings You can clear all the settings and reset the RM-VZ220 to its factory settings. 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press , then release both buttons. 2 Enter 9 - 0 - 0 using the number buttons. The SET indicator flashes three times. To cancel, press any button except . 3 Press . The SET indicator flashes three times and turns off.
Remote Button Descriptions
General _ SET: Press to set up the RM-VZ220. The indicator lights or flashes while setting. _Device Select buttons: Press to select the device to operate. _GUIDE: Displays the programguide (EPG). +//+/+/ : Moves the cursor to select a menu item/enters the selected item. _RETURN: Returns to the previous display/exits the menu. jVOL +/: Turns the volume up/down. jPOWER: Turns the selected device on and off. gMUTING: Mutes the volume. Press again to turn muting off. gSLEEP: Enables the Sleep function (when available). The number 5, CH+, and buttons each have a tactile dot for ease of use. The GUIDE and RETURN buttons do not work for a VCR. Note on theVOL+/ and MUTINGbuttons When a TV or other video device is selected, the TVs volume is controlled. When a DVD Home Theater is selected, its volume can be controlled. TV m: VIDEO 1 input : VIDEO 2 input : HDMI input : RGB input ~: (PIP INPUT) Changes the input mode of the window picture. : (PIP) Turns the window picture on and off. : (PIP MOVE) Moves the location of the window picture. H: (PIP STILL) Freezes the window picture. N: (PIP SWAP) Switches between main and window picture. _A: Red button B: Green button C: Yellow button D: Blue button jLIST: (CAPTION) Displays closed captioning.
jMENU: Calls up the menu display. _INPUT: Changes the input mode. jjg1 9, 0, ENTER, (dot): Changes the channel. For example, to change to channel 5, press 0 and 5 (or, press 5 and ENTER). jPAGE +/: (PIP CH+/) Changes the channel up/down in the window picture. jFAVORITES: Enables the Favorite function. jINFO: Displays program information. gOPTIONS: Displays the options menu. gRECALL: Selects the channel previously selected. gCH +/: Switches the channel up/ down.
Cable set top box/IPTV m: Proceeds to the previous location. : Briefly replays the scene (Flash ). : Briefly fast forwards the scene (Flash +). : Proceeds to the next location. ~: Fast reverses. : Plays. : Fast forwards. : Records. H: Pauses. N: Stops. _A, B, C buttons D: (Live TV) Displays Master Guide. jLIST: Displays the title of recorded program.
jMENU: Calls up the menu display. _INPUT: Changes the input mode. jjg1 9, 0, ENTER, (dot): Changes the channel. For example, to change to channel 5, press 0 and 5 (or, press 5 and ENTER). jPAGE +/: Page up/down jFAVORITES: Enables the Favorite function. jINFO: Displays program information. gOPTIONS: Displays the options menu. gRECALL: Switches between the current and previous channel. gCH +/: Switches the channel up/ down.
Satellite receiver m: Proceeds to the previous location. : Briefly replays the scene (Flash ). : Briefly fast forwards the scene (Flash +). : Proceeds to the next location. ~: Fast reverses. : Plays. : Fast forwards. : Records. H: Pauses. N: Stops. _A: Red button B: Green button C: Yellow button D: Blue button jLIST: Displays the title of recorded program/PVR menu.
jMENU: Calls up the menu display. _INPUT: (TV/SAT) Switches the output between SAT and TV. jjg1 9, 0, ENTER, (dot): Changes the channel. For example, to change to channel 5, press 0 and 5 (or, press 5 and ENTER). jPAGE +/: Page up/down jFAVORITES: Enables the Favorite function. jINFO: Displays program information. gOPTIONS: Displays the Satellite dish menu/Station Index. gRECALL: Tunes to the last tuned station. gCH +/: Switches the channel up/ down.
VCR ~: Rewinds. : Plays. : Fast forwards. : Records. H: Pauses. N: Stops. _INPUT: Changes the input mode. j1 9, 0: Number buttons j: Ejects a tape.
jINFO: (DISPLAY) Displays the playback information. gOPTIONS: (ANT/SW) Switches the antenna output. gRECALL: (DRIVE SELECT) Selects the deck. gCH +/: Switches the channel up/ down. gENTER: Enters the selected item. DVDplayer/recorder m: Skips to the previous chapter/track. : Briefly replays the scene (Flash ). : Briefly fast forwards the scene (Flash +). : Skips to the next chapter/ track. ~: Fast reverses. : Plays. : Fast forwards. : Records (for DVD recorder). H: Pauses. N: Stops. _A: (SET UP) Calls up the system/ setup menu. B: (SUBTITLE) Switches the subtitle. C: (AUDIO) Changes the sound. D: (CLEAR) Clears the setting. jLIST: Displays the Title List. jMENU: Displays the DVD menu.
_INPUT: Changes the input mode. j1 9, 0: Number buttons j (dot): (+10) Selects numbers 10 and above. j: Opens/closes the disc tray. jPAGE +: (DVD) Selects the DVD drive. PAGE : (HDD) Selects the internal HDD (hard disk drive). jFAVORITES: (TOP MENU) Displays the Top Menu. jINFO: (DISPLAY) Displays the playback information. gOPTIONS: Displays the options menu. gRECALL: (DRIVE SELECT) Switches between HDD and DVD. gCH +/: Switches the channel up/ down (for DVD recorder). gENTER: Enters the selected item.
Blu-ray Disc/HD-DVDplayer m: Skips to the previous chapter/track. : Briefly replays the scene (Flash ). : Briefly fast forwards the scene (Flash +). : Skips to the next chapter/ track. ~: Fast reverses. : Plays. : Fast forwards. : Records (for BD recorder). H: Pauses. N: Stops. _A: (SET UP) Calls up the system/ setup menu. B: (SUBTITLE) Switches the subtitle. C: (AUDIO) Changes the sound. D: (CLEAR) Clears the setting.
jMENU: Displays the Pop-up Menu/ Disc Menu. _INPUT: Changes the input mode. j1 9, 0: Number buttons j (dot): (+10) Selects numbers 10 and above. j: Opens/closes the disc tray. jPAGE +: (BD) Selects the BD drive. PAGE : (HDD) Selects the internal HDD (hard disk drive). jFAVORITES: (TOP MENU) Displays the Top Menu. jINFO: (DISPLAY) Displays the playback information. gOPTIONS: Displays the options menu. gENTER: Enters the selected item.
DVR (digital video recorder)/PVR (personal video recorder) m: Proceeds to the previous location. : Briefly replays the scene (Flash ). : Briefly fast forwards the scene (Flash +). : Proceeds to the next location. ~: Fast reverses. : Plays. : Fast forwards. : Records. H: Pauses. N: Stops. _A: (REPLAY*) Enables the Replay function for DVR/Replay TV. B: (Live TV*) Displays Master Guide. jLIST: Displays the title of recorded program.
jMENU: Calls up the menu display. _INPUT: Changes the input mode. j1 9, 0: Number buttons j (dot): (+10) Selects numbers 10 and above. j: Opens/closes the disc tray. jPAGE +/: Page up/down, Thumbs* up/down jINFO: (DISPLAY) Displays the playback information. gRECALL: Selects the channel previously selected. gCH +/: Switches the channel up/ down. gENTER: Enters the selected item. * These buttons correspond to TiVo service or the Replay service. Refer to its instruction manual for details.
DVDHomeTheater m: Skips to the previous chapter/track. : Briefly replays the scene (Flash ). : Briefly fast forwards the scene (Flash +). : Skips to the next chapter/ track. ~: Fast reverses. : Plays. : Fast forwards. : Records. H: Pauses. N: Stops. _A: (SET UP) Calls up the system/ setup menu. B: (SUBTITLE) Switches the subtitle. C: (AUDIO) Changes the sound. D: (CLEAR) Clears the setting.
jLIST: Enables the SOUND FIELD function. jMENU: Displays the DVD menu. _INPUT: Changes the input mode. j1 9, 0: Number buttons j (dot): (+10) Selects numbers 10 and above. j: Opens/closes the disc tray. jFAVORITES: (TOP MENU) Displays the Top Menu. jINFO: (DISPLAY) Displays the playback information. gOPTIONS: Displays the amplifier menu. gRECALL: (BAND) Selects FM/AM. gCH +/: Presets or tunes frequency up/down. gENTER: Enters the selected item.
Notes on using the RM-VZ220 The RM-VZ220 will not performfunctions that the device is not designed for. For example, if your TV does not have the muting function, MUTING on the RM-VZ220 will not function with your TV. The function of the buttons varies depending on settings/operating modes. The table of Remote Button Descriptions shows how the RM-VZ220 generally operates for each device in the preset mode. If your cable set top box can control volume, be sure to set its volume to a moderate level. If the volume on the cable set top box is turned down completely, you will not be able to adjust your TVs volume with the RM-VZ220.
Manufacturers Code List / Lista de cdigos del fabricante English The following tables show brand names (Brand) and their corresponding code numbers (Code No.). 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 2 Enter the manufacturers code. The SET indicator flashes three times and turns off. Espaol La siguiente tabla muestra los nombres de las marcas (Brand) y el nmero de cdigo correspondiente (Code No.). 1 Presione y mantenga presionado el botn SET durante ms de 3 segundos. Se encender la luz indicadora SET. Mientras tiene presionado el botn SET, presione el botn de seleccin de dispositivo deseado y luego suelte ambos botones. 2 Ingrese el cdigo del fabricante. El indicador SET parpadear tres veces y se apagar.
Brand Code No. Acer 01339 Action 00650 Admiral 00463 Akai 00812, 01675, 00702, 02232 Akira 01733 AOC 01365, 01589 Apex Digital 00748 Aventura 00171 Bell & Howell 00154 BPL 01543 Broksonic 00463 Carver 00054 Celebrity 00000 Coby 02306, 02345, 02348 Commercial Solutions 01447 Crosley 00054 Curtis 02352 Curtis Mathes 00054, 00154, 00702, 01661 Daewoo 01661 Digital Lifestyles 01765 Durabrand 00463, 00171 Dynex 01463, 01810, 02049 Electroband 00000 Electrograph 01755 Electrohome 00463 Elektra 01661 Element 01687 Emerson 01864, 00154, 00463, 00171, 01661, 01394 Emprex 01765 Envision 01365, 01589 ESA 00812, 00171 Fisher 00154 Funai 00171 Gateway 01755, 01756 GE 01447, 00051, 02359 GFM 00171 Haier 01748, 01749, 02309, 02449 Harman/Kardon 00054 Hisense 00748, 01314, 02098 Hitachi 01643, 02215, 02433 iLo 01684 Infinity 00054 Insignia 01564, 00171, 02049 JBL 00054 JCB 00000 JVC 00731, 01253, 01601, 01774 KDS 01687 Kolin 01331 LG 01423, 02358 LXI 00054, 00154, 00156 MAG 01687 Magnavox 01454, 01866, 00054, 01254, 01365, 02372 Marantz 00054 Matsushita 00650 Maxent 01755 Memorex 00154, 00463, 00150 MGA 00150 Midland 00051
Brand Code No. Mitsubishi 01250, 00150, 00836 NAD 00156 NEC 01797 NetTV 01755 Norcent 00748, 01365, 01589 Olevia 01610, 01144, 01331 Onida 01253, 02396 Optimus 00154, 00650 Orion 00463, 01463 Panasonic 01480, 00051, 00650 PARK 02104 Penney 00156, 00051 Petters 01523 Philco 00054 Philips 01454, 00054, 00690, 01744, 02372 Pioneer 01457, 01260 Polaroid 01523, 01276, 01314, 01687 Portland 01661 Prism 00051 Proscan 01447, 02147, 02256 Proview 01687 Quasar 00051, 00650 RadioShack 00154 RCA 01447, 01781, 02187, 02247, 02403, 02429, 02434 Realistic 00154 Sampo 01755 Samsung 00812, 00702 Sansui 00463 Sanyo 00154, 01142 Sceptre 01360, 01599 Scott 01711 Sears 00054, 00154, 00156, 00171 Sharp 00818 Sony 00810, 00000 Spectroniq 01687 Squareview 00171 Superscan 00864 Supreme 00000 SVA 00748 Sylvania 01864, 00054, 00171, 01314, 01394 Symphonic 00171 Syntax 01610, 01144, 01331 Tatung 01756 TCL 02403, 02429 Technics 00051 Techwood 00051 Teknika 00054, 00150 Telefunken 00702 Toshiba 01524, 00154, 00156, 00650 TVS 00463 Venturer 01865 Videocon 01540, 01541, 02436 Vidikron 00054 Viewsonic 01755, 00864, 00885, 01627, 01742 Viore 01684, 02104, 02352 Vizio 01758, 00864, 00885, 01756 VU 02098
TV/ TV
Brand Code No. Wards 00054 Waycon 00156 Westinghouse 01712, 00885, 01577 White Westinghouse 00463, 01661 Wyse 01365 Zenith 00463, 01661
Brand Code No. Accurian 10675 Akai 10695 Allegro 10869 Apex Digital 10672, 11056 Bel Canto Design 11571 Broksonic 10695 CineVision 10869 Citizen 10695 CyberHome 11024 Daewoo 10869 Denon 10490, 11634, 12258 Disney 10675, 11270 Emerson 10591, 10675 Enterprise 10591 Funai 10675 GE 10522 GFM 10675 Go Video 10744, 10741, 10869, 11044, 11075 GoldStar 10741 Harman/Kardon 11229 Hitachi 10573, 10664 Hiteker 10672 Insignia 10675, 12428, 12596 Integra 11769, 10627, 12147 JVC 10623, 10867, 11164 Kenwood 10490 LG 10591, 10741, 10869 Magnavox 10503, 10539, 10646, 10675, 11354 Marantz 10539, 12414, 12432 Memorex 10695, 11270, 12213 Microsoft 10522, 12083 Mitsubishi 11521 NAD 10741, 12572 Olevia 12331 Onkyo 10503, 11769, 10627, 11627, 12147
Brand Code No. Oppo 10575, 12545 Panasonic 10490, 11579, 11641 Philco 10675 Philips 10503, 10539, 12056, 12084, 10646, 10675, 11267, 11354, 12434 Pioneer 10142, 10631, 11571, 12442 Polk Audio 10539 Presidian 10675 Proscan 10522 RCA 10522, 11769, 10822, 12213, 12587, 12592, 12594 Rio 10869 Rotel 10623 Samsung 10490, 10573, 10199, 11044, 11075, 12329, 12489 Sansui 10695 Sanyo 10695 Sharp 10630, 10675, 12250 Shinsonic 10533 Sonic Blue 10869 Sony 11633, 10533, 10864, 11033, 11070, 11431, 11516 Sylvania 10675 Symphonic 10675 TCL 12587 Technics 10490 Tivo 11503 Toshiba 10503, 11769, 10695, 11154, 11503, 12006, 12277 Urban Concepts 10503 Viore 12553 Vizio 12563 Vtrek 12587 Xbox 10522, 12083 Yamaha 10490, 10539, 10497, 10817, 12298 Zenith 10503, 10591, 10741, 10869
DVDplayer / Reproductor de DVD
Brand Code No. Accurian 10675 Apex Digital 11056 Funai 10675 Go Video 10741 JVC 11164 LG 10741 Magnavox 10646, 10675 Panasonic 10490, 11579 Philips 10646
Brand Code No. Pioneer 10631 RCA 10522 Samsung 10490 Sharp 10675 Sony 11033, 11070, 11431 Sylvania 10675 Toshiba 12277 Zenith 10741
DVDrecorder / Grabadora de DVD
Blu-ray Disc/HD-DVDplayer/ Reproductor de Blu-ray Disc/HD-DVD Brand Code No. Denon 12258 Insignia 10675, 12428, 12596 Integra 11769, 12147 LG 10741 Magnavox 10675 Marantz 12414, 12432 Microsoft 12083 NAD 12572 Olevia 12331 Onkyo 11769, 12147 Oppo 12545 Panasonic 11641
Brand Code No. Philips 12084, 12434 Pioneer 10142, 12442 RCA 11769 Samsung 10199 Sharp 12250 Sony 11516 Sylvania 10675 Toshiba 11769 Viore 12553 Vizio 12563 Xbox 12083 Yamaha 12298
RM-VZ220_U [US,ES] 4-170-642-12(1) RM-VZ220_U [US,ES] 4-170-642-12(1)
4-170-642-12(1)
Remote Commander
RM-VZ220
2010 Sony Corporation Printed in China
Operating Instructions
Manual de instrucciones (parte posterior)
English
For the Customers in the U.S.A.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different fromthat to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
Setting Up the RM-VZ220
The RM-VZ220 is preset at the factory to operate Sony brand video devices
set to any of the Device Select buttons (see the table below).
To use with non-Sony devices, or Sony devices that are not preset at the
factory, set the manufacturers code for each device.
Devices Button Factory setting*
TV TV Sony TV (00810)
TV, Cable set top box, Satellite
receiver, IPTV, DVD player, DVD
recorder, Blu-ray Disc player, DVR
(digital video recorder), PVR
(personal video recorder), VCR,
DVD Home Theater
CBL (SAT) Cable set top box (non-
Sony) (51376)
VCR Sony VCR (60032)
DVD Sony DVD player
(11033)
* The five-digit code is the preset manufacturers code.
Note
Only a TV can be assigned to the TV Device Select button. You can assign any device to
the other Device Select buttons.
Installing the batteries
Slide open the battery compartment and insert two size AA (R6) dry
batteries (not supplied).
Insert the batteries (negative end first) through the guide clamp within each
compartment as shown below.
1 2
Battery life
Under normal conditions, size AA (LR6) alkaline batteries will last up to one
year. If the RM-VZ220 does not operate properly, the batteries might be
drained. Replace both batteries with new ones.
Notes
Replace the batteries within 2 minutes after removing them, and do not press any
button when replacing the batteries. Otherwise, your code settings may be cleared.
Do not use an old battery with a new one, or mix different types of batteries together.
If the electrolyte inside the battery should leak, wipe the contaminated area of the
battery compartment with a cloth and replace the old batteries with new ones. To
prevent electrolyte fromleaking, remove the batteries when you plan not to use the
RM-VZ220 for a long period of time.
Specifications
Operating distance Approx. 11 m(36 ft) (varies depending on devices of
different manufacturers)
Power requirements Two size AA (R6) dry batteries (not supplied)
Battery life Approx. 1 year when using size AA (LR6) alkaline batteries
(varies depending on frequency of button use - up to approx.
300 times per day.)
Dimensions Approx. 53 213 27 mm(2 1/8 8 1/2 1 1/8 in.)
(w/h/d)
Mass Approx. 100 g (3.5 oz) (not including batteries)
Design and specifications are subject to change without notice.
Troubleshooting
If you have problems setting up or using the RM-VZ220:
Carefully performthe setup procedure of Startup Guide. If the RM-VZ220 does not
work, try repeating the setup procedure using another manufacturers code (if listed
for your device). If you still cannot operate the RM-VZ220, try the Search function
(see Searching for the correct code).
Aimthe RM-VZ220 directly at the device.
Remove any obstacles in the path between the RM-VZ220 and the device.
Make sure you have pressed the correct Device Select button.
Check that the device has infrared remote capability. For example, if your device did
not come with a remote control, it probably is not capable of being controlled by the
RM-VZ220.
The batteries are weak, or not inserted correctly. Replace themwith new ones or insert
them correctly.
For the customers in the U.S.A.
Customer Support Information
After you have read through this manual, if you still cannot get the RM-VZ220 to work
properly, call the Sony Customer Support Helpline at
1-800-822-2217.
Startup Guide
This guide shows you howto set up and use the RM-VZ220 to operate your devices.
If your Sony device has already been preset, see Operate the device.
Set the manufacturers code
Example: To set up a Philips TV
1 Find the manufacturers code in Manufacturers Code List.
Manufacturers Code List / Lista de cdigos del fabricante English The following tables show brand names (Brand) and their corresponding code numbers (Code No.). 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 2 Enter the manufacturers code. The SET indicator flashes three times and turns off. Espaol La siguiente tabla muestra los nombres de las marcas (Brand) y el nmero de cdigo correspondiente (Code No.). 1 Presione y mantenga presionado el botn SET durante ms de 3 segundos. Se encender la luz indicadora SET. Mientras tiene presionado el botn SET, presione el botn de seleccin de dispositivo deseado y luego suelte ambos botones. 2 Ingrese el cdigo del fabricante. El indicador SET parpadear tres veces y se apagar.
Brand Code No. Sony 00810, 00000 Acer 01339 Action 00650 Admiral 00463 Akai 00812, 01675, 00702, 02232 Akira 01733 AOC 01365, 01589 Apex Digital 00748 Aventura 00171 Bell & Howell 00154 BPL 01543 Broksonic 00463 Carver 00054 Celebrity 00000 Coby 02306, 02345, 02348 Commercial Solutions 01447 Crosley 00054 Curtis 02352 Curtis Mathes 00054, 00154, 00702, 01661 Daewoo 01661 Digital Lifestyles 01765 Durabrand 00463, 00171 Dynex 01463, 01810, 02049 Electroband 00000 Electrograph 01755 Electrohome 00463 Elektra 01661 Element 01687 Emerson 01864, 00154, 00463, 00171, 01661, 01394 Emprex 01765 Envision 01365, 01589 ESA 00812, 00171 Fisher 00154 Funai 00171 Gateway 01755, 01756 GE 01447, 00051, 02359 GFM 00171 Haier 01748, 01749, 02309, 02449 Harman/Kardon 00054 Hisense 00748, 01314, 02098 Hitachi 01643, 02215, 02433 iLo 01684 Infinity 00054 Insignia 01564, 00171, 02049 JBL 00054 JCB 00000 JVC 00731, 01253, 01601, 01774 KDS 01687 Kolin 01331 LG 01423, 02358 LXI 00054, 00154, 00156 MAG 01687 Magnavox 01454, 01866, 00054, 01254, 01365, 02372 Marantz 00054 Matsushita 00650 Maxent 01755 Memorex 00154, 00463, 00150 MGA 00150
Brand Code No. Midland 00051 Mitsubishi 01250, 00150, 00836 NAD 00156 NEC 01797 NetTV 01755 Norcent 00748, 01365, 01589 Olevia 01610, 01144, 01331 Onida 01253, 02396 Optimus 00154, 00650 Orion 00463, 01463 Panasonic 01480, 00051, 00650 PARK 02104 Penney 00156, 00051 Petters 01523 Philco 00054 Philips 01454, 00054, 00690, 01744, 02372 Pioneer 01457, 01260 Polaroid 01523, 01276, 01314, 01687 Portland 01661 Prism 00051 Proscan 01447, 02147, 02256 Proview 01687 Quasar 00051, 00650 RadioShack 00154 RCA 01447, 01781, 02187, 02247, 02403, 02429, 02434 Realistic 00154 Sampo 01755 Samsung 00812, 00702 Sansui 00463 Sanyo 00154, 01142 Sceptre 01360, 01599 Scott 01711 Sears 00054, 00154, 00156, 00171 Sharp 00818 Spectroniq 01687 Squareview 00171 Superscan 00864 Supreme 00000 SVA 00748 Sylvania 01864, 00054, 00171, 01314, 01394 Symphonic 00171 Syntax 01610, 01144, 01331 Tatung 01756 TCL 02403, 02429 Technics 00051 Techwood 00051 Teknika 00054, 00150 Telefunken 00702 Toshiba 01524, 00154, 00156, 00650 TVS 00463 Venturer 01865 Videocon 01540, 01541, 02436 Vidikron 00054 Viewsonic 01755, 00864, 00885, 01627, 01742 Viore 01684, 02104, 02352 Vizio 01758, 00864, 00885, 01756 VU 02098
TV/ TV
Brand Code No. Wards 00054 Waycon 00156 Westinghouse 01712, 00885, 01577 White Westinghouse 00463, 01661 Wyse 01365 Zenith 00463, 01661
Brand Code No. Sony 11633, 10533, 10864, 11033, 11070, 11431, 11516 Accurian 10675 Akai 10695 Allegro 10869 Apex Digital 10672, 11056 Bel Canto Design 11571 Broksonic 10695 CineVision 10869 Citizen 10695 CyberHome 11024 Daewoo 10869 Denon 10490, 11634, 12258 Disney 10675, 11270 Emerson 10591, 10675 Enterprise 10591 Funai 10675 GE 10522 GFM 10675 Go Video 10744, 10741, 10869, 11044, 11075 GoldStar 10741 Harman/Kardon 11229 Hitachi 10573, 10664 Hiteker 10672 Insignia 10675, 12428, 12596 Integra 11769, 10627, 12147 JVC 10623, 10867, 11164 Kenwood 10490 LG 10591, 10741, 10869 Magnavox 10503, 10539, 10646, 10675, 11354 Marantz 10539, 12414, 12432 Memorex 10695, 11270, 12213 Microsoft 10522, 12083 Mitsubishi 11521 NAD 10741, 12572 Olevia 12331
Brand Code No. Onkyo 10503, 11769, 10627, 11627, 12147 Oppo 10575, 12545 Panasonic 10490, 11579, 11641 Philco 10675 Philips 10503, 10539, 12056, 12084, 10646, 10675, 11267, 11354, 12434 Pioneer 10142, 10631, 11571, 12442 Polk Audio 10539 Presidian 10675 Proscan 10522 RCA 10522, 11769, 10822, 12213, 12587, 12592, 12594 Rio 10869 Rotel 10623 Samsung 10490, 10573, 10199, 11044, 11075, 12329, 12489 Sansui 10695 Sanyo 10695 Sharp 10630, 10675, 12250 Shinsonic 10533 Sonic Blue 10869 Sylvania 10675 Symphonic 10675 TCL 12587 Technics 10490 Tivo 11503 Toshiba 10503, 11769, 10695, 11154, 11503, 12006, 12277 Urban Concepts 10503 Viore 12553 Vizio 12563 Vtrek 12587 Xbox 10522, 12083 Yamaha 10490, 10539, 10497, 10817, 12298 Zenith 10503, 10591, 10741, 10869
DVDplayer / Reproductor de DVD
Brand Code No. Sony 11033, 11070, 11431 Accurian 10675 Apex Digital 11056 Funai 10675 Go Video 10741 JVC 11164 LG 10741 Magnavox 10646, 10675 Panasonic 10490, 11579
Brand Code No. Philips 10646 Pioneer 10631 RCA 10522 Samsung 10490 Sharp 10675 Sylvania 10675 Toshiba 12277 Zenith 10741
DVDrecorder / Grabadora de DVD
Blu-ray Disc/HD-DVDplayer/ Reproductor de Blu-ray Disc/HD-DVD Brand Code No. Sony 11516 Denon 12258 Insignia 10675, 12428, 12596 Integra 11769, 12147 LG 10741 Magnavox 10675 Marantz 12414, 12432 Microsoft 12083 NAD 12572 Olevia 12331 Onkyo 11769, 12147 Oppo 12545
Brand Code No. Panasonic 11641 Philips 12084, 12434 Pioneer 10142, 12442 RCA 11769 Samsung 10199 Sharp 12250 Sylvania 10675 Toshiba 11769 Viore 12553 Vizio 12563 Xbox 12083 Yamaha 12298
Brand Code No.
Sony 00810, 00000
Acer 01339
Action 00650
Brand Code No.
Midland 00051
Mitsubishi 01250, 00150, 00836
NAD 00156
TV/ TV
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial Solutions 01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Panasonic 01480, 00051, 00650
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744, 02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
If your device is not listed, try the Search function (see Searching for the correct code).
2 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press
the desired Device Select button,
then release both buttons.
3 Enter the manufacturers code (01454).
The SET indicator flashes three times and
turns off.

Operate the device


1 Aim the RM-VZ220 directly at the device.
2 Press the Device Select button for the
device you want to operate.
3 Press POWER to turn on the device.
4 Press buttons on the RM-VZ220 to check that they function.
See Remote Button Descriptions for the functions of buttons for each device.
If the RM-VZ220 does not seemto be working
Check that you have set the correct manufacturers code.
Try repeating the setup procedure using another manufacturers code (if listed for your device).
If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see Searching
for the correct code).
Notes
If the setting is incomplete,
the SET indicator flashes once
and the indicators turn off.
Start again fromthe
beginning.
If no operations are
performed for 10 seconds
while setting, the setting will
be canceled, and must be
restarted.
To cancel the process, press
SET any time. The SET
indicator turns off.
SET
POWER
Device
Select
buttons
Number
buttons
The SET indicator
lights up.
Searching for the correct code
You can set the manufacturers code using the Search function.
1 Power on the device with its power switch.
2 Aimthe RM-VZ220 at the device you want to set.
3 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
4 Enter 9 - 2 - 2 using the number buttons.
The SET indicator flashes three times.
5 Press and hold to start searching.
When the device turns off, release the button.
If you overshoot the required code, you can search for the next or previous
code using the or ~ button.
6 Press .
The SET indicator flashes three times and turns off.
7 Check if the code number works correctly (see Remote Button
Descriptions).
If you still cannot operate the device, repeat steps to search for another
code that works for most functions of your device.
Checking the manufacturers code you have set
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
2 Enter 9 - 3 - 3 using the number buttons.
The SET indicator flashes three times.
3 Press .
4 When the SET indicator starts flashing, count the number of flashes.
Short flash(es) indicate which digit (first, second, etc.), followed by long
flash(es) to indicate the digit number (i.e., 2 long flashes represent the
number 2). 0 is indicated by rapid flashing.
Determine the 5-digit code number this way. To recheck, press .
5 Press SET to finish.
Clearing the automatic power-on control (Sony
devices only)
The Device Select buttons are preset to automatically turn on a device when
pressed.
To cancel the function:
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press , then release both buttons.
2 Enter 9 - 7 - 7 using the number buttons.
The SET indicator flashes three times.
3 Press the desired Device Select button.
The SET indicator flashes three times and turns off.
To set the function again, performthe same procedure above.
Restoring the factory settings
You can clear all the settings and reset the RM-VZ220 to its factory settings.
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press , then release both buttons.
2 Enter 9 - 0 - 0 using the number buttons.
The SET indicator flashes three times.
To cancel, press any button except .
3 Press .
The SET indicator flashes three times and turns off.
Remote Button Descriptions
General
_ SET: Press to set up the RM-VZ220. The indicator lights or flashes while
setting.
_Device Select buttons: Press to select the device to operate.
_GUIDE: Displays the programguide (EPG).
+//+/+/ : Moves the cursor to select a menu item/enters the selected item.
_RETURN: Returns to the previous display/exits the menu.
jVOL +/: Turns the volume up/down.
jPOWER: Turns the selected device on and off.
gMUTING: Mutes the volume. Press again to turn muting off.
gSLEEP: Enables the Sleep function (when available).
The number 5, CH+, and buttons each have a tactile dot for ease of use.
The GUIDE and RETURN buttons do not work for a VCR.
Note on theVOL+/ and MUTINGbuttons
When a TV or other video device is selected, the TVs volume is controlled. When a
DVD Home Theater is selected, its volume can be controlled.
TV
m: VIDEO 1 input
: VIDEO 2 input
: HDMI input
: RGB input
~: (PIP INPUT) Changes the
input mode of the window
picture.
: (PIP) Turns the window
picture on and off.
: (PIP MOVE) Moves the
location of the window picture.
H: (PIP STILL) Freezes the
window picture.
N: (PIP SWAP) Switches between
main and window picture.
_A: Red button
B: Green button
C: Yellow button
D: Blue button
jLIST: (CAPTION) Displays closed
captioning.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
jjg1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: (PIP CH+/) Changes
the channel up/down in the
window picture.
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the options
menu.
gRECALL: Selects the channel
previously selected.
gCH +/: Switches the channel up/
down.
Cable set top box/IPTV
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A, B, C buttons
D: (Live TV) Displays Master
Guide.
jLIST: Displays the title of recorded
program.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
jjg1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: Page up/down
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the options
menu.
gRECALL: Switches between the
current and previous channel.
gCH +/: Switches the channel up/
down.
Satellite receiver
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: Red button
B: Green button
C: Yellow button
D: Blue button
jLIST: Displays the title of recorded
program/PVR menu.
jMENU: Calls up the menu display.
_INPUT: (TV/SAT) Switches the
output between SAT and TV.
jjg1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: Page up/down
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the Satellite
dish menu/Station Index.
gRECALL: Tunes to the last tuned
station.
gCH +/: Switches the channel up/
down.
VCR
~: Rewinds.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j: Ejects a tape.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: (ANT/SW) Switches
the antenna output.
gRECALL: (DRIVE SELECT) Selects
the deck.
gCH +/: Switches the channel up/
down.
gENTER: Enters the selected item.
DVDplayer/recorder
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records (for DVD recorder).
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jLIST: Displays the Title List.
jMENU: Displays the DVD menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +: (DVD) Selects the DVD
drive.
PAGE : (HDD) Selects the
internal HDD (hard disk drive).
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the options
menu.
gRECALL: (DRIVE SELECT)
Switches between HDD and DVD.
gCH +/: Switches the channel up/
down (for DVD recorder).
gENTER: Enters the selected item.
Blu-ray Disc/HD-DVDplayer
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records (for BD recorder).
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jMENU: Displays the Pop-up Menu/
Disc Menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +: (BD) Selects the BD drive.
PAGE : (HDD) Selects the
internal HDD (hard disk drive).
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the options
menu.
gENTER: Enters the selected item.
DVR (digital video recorder)/PVR (personal video recorder)
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: (REPLAY*) Enables the Replay
function for DVR/Replay TV.
B: (Live TV*) Displays Master
Guide.
jLIST: Displays the title of recorded
program.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +/: Page up/down,
Thumbs* up/down
jINFO: (DISPLAY) Displays the
playback information.
gRECALL: Selects the channel
previously selected.
gCH +/: Switches the channel up/
down.
gENTER: Enters the selected item.
* These buttons correspond to TiVo
service or the Replay service. Refer to
its instruction manual for details.
DVDHomeTheater
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jLIST: Enables the SOUND FIELD
function.
jMENU: Displays the DVD menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the amplifier
menu.
gRECALL: (BAND) Selects FM/AM.
gCH +/: Presets or tunes frequency
up/down.
gENTER: Enters the selected item.
Notes on using the RM-VZ220
The RM-VZ220 will not performfunctions that the device is not designed for. For
example, if your TV does not have the muting function, MUTING on the RM-VZ220
will not function with your TV.
The function of the buttons varies depending on settings/operating modes. The table
of Remote Button Descriptions shows how the RM-VZ220 generally operates for
each device in the preset mode.
If your cable set top box can control volume, be sure to set its volume to a moderate
level. If the volume on the cable set top box is turned down completely, you will not be
able to adjust your TVs volume with the RM-VZ220.
Manufacturers Code List /
Lista de cdigos del fabricante
English
The following tables show brand names (Brand) and their corresponding
code numbers (Code No.).
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
2 Enter the manufacturers code.
The SET indicator flashes three times and turns off.
Espaol
La siguiente tabla muestra los nombres de las marcas (Brand) y el nmero
de cdigo correspondiente (Code No.).
1 Presione y mantenga presionado el botn SET durante ms de 3 segundos.
Se encender la luz indicadora SET.
Mientras tiene presionado el botn SET, presione el botn de seleccin de
dispositivo deseado y luego suelte ambos botones.
2 Ingrese el cdigo del fabricante.
El indicador SET parpadear tres veces y se apagar.
Brand Code No.
Acer 01339
Action 00650
Admiral 00463
Akai 00812, 01675, 00702, 02232
Akira 01733
AOC 01365, 01589
Apex Digital 00748
Aventura 00171
Bell & Howell 00154
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial
Solutions
01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Dynex 01463, 01810, 02049
Electroband 00000
Electrograph 01755
Electrohome 00463
Elektra 01661
Element 01687
Emerson 01864, 00154, 00463, 00171,
01661, 01394
Emprex 01765
Envision 01365, 01589
ESA 00812, 00171
Fisher 00154
Funai 00171
Gateway 01755, 01756
GE 01447, 00051, 02359
GFM 00171
Haier 01748, 01749, 02309, 02449
Harman/Kardon 00054
Hisense 00748, 01314, 02098
Hitachi 01643, 02215, 02433
iLo 01684
Infinity 00054
Insignia 01564, 00171, 02049
JBL 00054
JCB 00000
JVC 00731, 01253, 01601, 01774
KDS 01687
Kolin 01331
LG 01423, 02358
LXI 00054, 00154, 00156
MAG 01687
Magnavox 01454, 01866, 00054, 01254,
01365, 02372
Marantz 00054
Matsushita 00650
Maxent 01755
Memorex 00154, 00463, 00150
MGA 00150
Midland 00051
Brand Code No.
Mitsubishi 01250, 00150, 00836
NAD 00156
NEC 01797
NetTV 01755
Norcent 00748, 01365, 01589
Olevia 01610, 01144, 01331
Onida 01253, 02396
Optimus 00154, 00650
Orion 00463, 01463
Panasonic 01480, 00051, 00650
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744,
02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
Quasar 00051, 00650
RadioShack 00154
RCA 01447, 01781, 02187, 02247,
02403, 02429, 02434
Realistic 00154
Sampo 01755
Samsung 00812, 00702
Sansui 00463
Sanyo 00154, 01142
Sceptre 01360, 01599
Scott 01711
Sears 00054, 00154, 00156, 00171
Sharp 00818
Sony 00810, 00000
Spectroniq 01687
Squareview 00171
Superscan 00864
Supreme 00000
SVA 00748
Sylvania 01864, 00054, 00171, 01314,
01394
Symphonic 00171
Syntax 01610, 01144, 01331
Tatung 01756
TCL 02403, 02429
Technics 00051
Techwood 00051
Teknika 00054, 00150
Telefunken 00702
Toshiba 01524, 00154, 00156, 00650
TVS 00463
Venturer 01865
Videocon 01540, 01541, 02436
Vidikron 00054
Viewsonic 01755, 00864, 00885, 01627,
01742
Viore 01684, 02104, 02352
Vizio 01758, 00864, 00885, 01756
VU 02098
TV/ TV
Brand Code No.
Wards 00054
Waycon 00156
Westinghouse 01712, 00885, 01577
White
Westinghouse
00463, 01661
Wyse 01365
Zenith 00463, 01661
Brand Code No.
Accurian 10675
Akai 10695
Allegro 10869
Apex Digital 10672, 11056
Bel Canto Design 11571
Broksonic 10695
CineVision 10869
Citizen 10695
CyberHome 11024
Daewoo 10869
Denon 10490, 11634, 12258
Disney 10675, 11270
Emerson 10591, 10675
Enterprise 10591
Funai 10675
GE 10522
GFM 10675
Go Video 10744, 10741, 10869, 11044,
11075
GoldStar 10741
Harman/Kardon 11229
Hitachi 10573, 10664
Hiteker 10672
Insignia 10675, 12428, 12596
Integra 11769, 10627, 12147
JVC 10623, 10867, 11164
Kenwood 10490
LG 10591, 10741, 10869
Magnavox 10503, 10539, 10646, 10675,
11354
Marantz 10539, 12414, 12432
Memorex 10695, 11270, 12213
Microsoft 10522, 12083
Mitsubishi 11521
NAD 10741, 12572
Olevia 12331
Onkyo 10503, 11769, 10627, 11627,
12147
Brand Code No.
Oppo 10575, 12545
Panasonic 10490, 11579, 11641
Philco 10675
Philips 10503, 10539, 12056, 12084,
10646, 10675, 11267, 11354,
12434
Pioneer 10142, 10631, 11571, 12442
Polk Audio 10539
Presidian 10675
Proscan 10522
RCA 10522, 11769, 10822, 12213,
12587, 12592, 12594
Rio 10869
Rotel 10623
Samsung 10490, 10573, 10199, 11044,
11075, 12329, 12489
Sansui 10695
Sanyo 10695
Sharp 10630, 10675, 12250
Shinsonic 10533
Sonic Blue 10869
Sony 11633, 10533, 10864, 11033,
11070, 11431, 11516
Sylvania 10675
Symphonic 10675
TCL 12587
Technics 10490
Tivo 11503
Toshiba 10503, 11769, 10695, 11154,
11503, 12006, 12277
Urban Concepts 10503
Viore 12553
Vizio 12563
Vtrek 12587
Xbox 10522, 12083
Yamaha 10490, 10539, 10497, 10817,
12298
Zenith 10503, 10591, 10741, 10869
DVDplayer / Reproductor de DVD
Brand Code No.
Accurian 10675
Apex Digital 11056
Funai 10675
Go Video 10741
JVC 11164
LG 10741
Magnavox 10646, 10675
Panasonic 10490, 11579
Philips 10646
Brand Code No.
Pioneer 10631
RCA 10522
Samsung 10490
Sharp 10675
Sony 11033, 11070, 11431
Sylvania 10675
Toshiba 12277
Zenith 10741
DVDrecorder / Grabadora de DVD
Blu-ray Disc/HD-DVDplayer/
Reproductor de Blu-ray Disc/HD-DVD
Brand Code No.
Denon 12258
Insignia 10675, 12428, 12596
Integra 11769, 12147
LG 10741
Magnavox 10675
Marantz 12414, 12432
Microsoft 12083
NAD 12572
Olevia 12331
Onkyo 11769, 12147
Oppo 12545
Panasonic 11641
Brand Code No.
Philips 12084, 12434
Pioneer 10142, 12442
RCA 11769
Samsung 10199
Sharp 12250
Sony 11516
Sylvania 10675
Toshiba 11769
Viore 12553
Vizio 12563
Xbox 12083
Yamaha 12298
RM-VZ220_U [US,ES] 4-170-642-12(1) RM-VZ220_U [US,ES] 4-170-642-12(1)
4-170-642-12(1)
Remote Commander
RM-VZ220
2010 Sony Corporation Printed in China
Operating Instructions
Manual de instrucciones (parte posterior)
English
For the Customers in the U.S.A.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different fromthat to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
Setting Up the RM-VZ220
The RM-VZ220 is preset at the factory to operate Sony brand video devices
set to any of the Device Select buttons (see the table below).
To use with non-Sony devices, or Sony devices that are not preset at the
factory, set the manufacturers code for each device.
Devices Button Factory setting*
TV TV Sony TV (00810)
TV, Cable set top box, Satellite
receiver, IPTV, DVD player, DVD
recorder, Blu-ray Disc player, DVR
(digital video recorder), PVR
(personal video recorder), VCR,
DVD Home Theater
CBL (SAT) Cable set top box (non-
Sony) (51376)
VCR Sony VCR (60032)
DVD Sony DVD player
(11033)
* The five-digit code is the preset manufacturers code.
Note
Only a TV can be assigned to the TV Device Select button. You can assign any device to
the other Device Select buttons.
Installing the batteries
Slide open the battery compartment and insert two size AA (R6) dry
batteries (not supplied).
Insert the batteries (negative end first) through the guide clamp within each
compartment as shown below.
1 2
Battery life
Under normal conditions, size AA (LR6) alkaline batteries will last up to one
year. If the RM-VZ220 does not operate properly, the batteries might be
drained. Replace both batteries with new ones.
Notes
Replace the batteries within 2 minutes after removing them, and do not press any
button when replacing the batteries. Otherwise, your code settings may be cleared.
Do not use an old battery with a new one, or mix different types of batteries together.
If the electrolyte inside the battery should leak, wipe the contaminated area of the
battery compartment with a cloth and replace the old batteries with new ones. To
prevent electrolyte fromleaking, remove the batteries when you plan not to use the
RM-VZ220 for a long period of time.
Specifications
Operating distance Approx. 11 m(36 ft) (varies depending on devices of
different manufacturers)
Power requirements Two size AA (R6) dry batteries (not supplied)
Battery life Approx. 1 year when using size AA (LR6) alkaline batteries
(varies depending on frequency of button use - up to approx.
300 times per day.)
Dimensions Approx. 53 213 27 mm(2 1/8 8 1/2 1 1/8 in.)
(w/h/d)
Mass Approx. 100 g (3.5 oz) (not including batteries)
Design and specifications are subject to change without notice.
Troubleshooting
If you have problems setting up or using the RM-VZ220:
Carefully performthe setup procedure of Startup Guide. If the RM-VZ220 does not
work, try repeating the setup procedure using another manufacturers code (if listed
for your device). If you still cannot operate the RM-VZ220, try the Search function
(see Searching for the correct code).
Aimthe RM-VZ220 directly at the device.
Remove any obstacles in the path between the RM-VZ220 and the device.
Make sure you have pressed the correct Device Select button.
Check that the device has infrared remote capability. For example, if your device did
not come with a remote control, it probably is not capable of being controlled by the
RM-VZ220.
The batteries are weak, or not inserted correctly. Replace themwith new ones or insert
them correctly.
For the customers in the U.S.A.
Customer Support Information
After you have read through this manual, if you still cannot get the RM-VZ220 to work
properly, call the Sony Customer Support Helpline at
1-800-822-2217.
Startup Guide
This guide shows you howto set up and use the RM-VZ220 to operate your devices.
If your Sony device has already been preset, see Operate the device.
Set the manufacturers code
Example: To set up a Philips TV
1 Find the manufacturers code in Manufacturers Code List.
Manufacturers Code List / Lista de cdigos del fabricante English The following tables show brand names (Brand) and their corresponding code numbers (Code No.). 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the desired Device Select button, then release both buttons. 2 Enter the manufacturers code. The SET indicator flashes three times and turns off. Espaol La siguiente tabla muestra los nombres de las marcas (Brand) y el nmero de cdigo correspondiente (Code No.). 1 Presione y mantenga presionado el botn SET durante ms de 3 segundos. Se encender la luz indicadora SET. Mientras tiene presionado el botn SET, presione el botn de seleccin de dispositivo deseado y luego suelte ambos botones. 2 Ingrese el cdigo del fabricante. El indicador SET parpadear tres veces y se apagar.
Brand Code No. Sony 00810, 00000 Acer 01339 Action 00650 Admiral 00463 Akai 00812, 01675, 00702, 02232 Akira 01733 AOC 01365, 01589 Apex Digital 00748 Aventura 00171 Bell & Howell 00154 BPL 01543 Broksonic 00463 Carver 00054 Celebrity 00000 Coby 02306, 02345, 02348 Commercial Solutions 01447 Crosley 00054 Curtis 02352 Curtis Mathes 00054, 00154, 00702, 01661 Daewoo 01661 Digital Lifestyles 01765 Durabrand 00463, 00171 Dynex 01463, 01810, 02049 Electroband 00000 Electrograph 01755 Electrohome 00463 Elektra 01661 Element 01687 Emerson 01864, 00154, 00463, 00171, 01661, 01394 Emprex 01765 Envision 01365, 01589 ESA 00812, 00171 Fisher 00154 Funai 00171 Gateway 01755, 01756 GE 01447, 00051, 02359 GFM 00171 Haier 01748, 01749, 02309, 02449 Harman/Kardon 00054 Hisense 00748, 01314, 02098 Hitachi 01643, 02215, 02433 iLo 01684 Infinity 00054 Insignia 01564, 00171, 02049 JBL 00054 JCB 00000 JVC 00731, 01253, 01601, 01774 KDS 01687 Kolin 01331 LG 01423, 02358 LXI 00054, 00154, 00156 MAG 01687 Magnavox 01454, 01866, 00054, 01254, 01365, 02372 Marantz 00054 Matsushita 00650 Maxent 01755 Memorex 00154, 00463, 00150 MGA 00150
Brand Code No. Midland 00051 Mitsubishi 01250, 00150, 00836 NAD 00156 NEC 01797 NetTV 01755 Norcent 00748, 01365, 01589 Olevia 01610, 01144, 01331 Onida 01253, 02396 Optimus 00154, 00650 Orion 00463, 01463 Panasonic 01480, 00051, 00650 PARK 02104 Penney 00156, 00051 Petters 01523 Philco 00054 Philips 01454, 00054, 00690, 01744, 02372 Pioneer 01457, 01260 Polaroid 01523, 01276, 01314, 01687 Portland 01661 Prism 00051 Proscan 01447, 02147, 02256 Proview 01687 Quasar 00051, 00650 RadioShack 00154 RCA 01447, 01781, 02187, 02247, 02403, 02429, 02434 Realistic 00154 Sampo 01755 Samsung 00812, 00702 Sansui 00463 Sanyo 00154, 01142 Sceptre 01360, 01599 Scott 01711 Sears 00054, 00154, 00156, 00171 Sharp 00818 Spectroniq 01687 Squareview 00171 Superscan 00864 Supreme 00000 SVA 00748 Sylvania 01864, 00054, 00171, 01314, 01394 Symphonic 00171 Syntax 01610, 01144, 01331 Tatung 01756 TCL 02403, 02429 Technics 00051 Techwood 00051 Teknika 00054, 00150 Telefunken 00702 Toshiba 01524, 00154, 00156, 00650 TVS 00463 Venturer 01865 Videocon 01540, 01541, 02436 Vidikron 00054 Viewsonic 01755, 00864, 00885, 01627, 01742 Viore 01684, 02104, 02352 Vizio 01758, 00864, 00885, 01756 VU 02098
TV/ TV
Brand Code No. Wards 00054 Waycon 00156 Westinghouse 01712, 00885, 01577 White Westinghouse 00463, 01661 Wyse 01365 Zenith 00463, 01661
Brand Code No. Sony 11633, 10533, 10864, 11033, 11070, 11431, 11516 Accurian 10675 Akai 10695 Allegro 10869 Apex Digital 10672, 11056 Bel Canto Design 11571 Broksonic 10695 CineVision 10869 Citizen 10695 CyberHome 11024 Daewoo 10869 Denon 10490, 11634, 12258 Disney 10675, 11270 Emerson 10591, 10675 Enterprise 10591 Funai 10675 GE 10522 GFM 10675 Go Video 10744, 10741, 10869, 11044, 11075 GoldStar 10741 Harman/Kardon 11229 Hitachi 10573, 10664 Hiteker 10672 Insignia 10675, 12428, 12596 Integra 11769, 10627, 12147 JVC 10623, 10867, 11164 Kenwood 10490 LG 10591, 10741, 10869 Magnavox 10503, 10539, 10646, 10675, 11354 Marantz 10539, 12414, 12432 Memorex 10695, 11270, 12213 Microsoft 10522, 12083 Mitsubishi 11521 NAD 10741, 12572 Olevia 12331
Brand Code No. Onkyo 10503, 11769, 10627, 11627, 12147 Oppo 10575, 12545 Panasonic 10490, 11579, 11641 Philco 10675 Philips 10503, 10539, 12056, 12084, 10646, 10675, 11267, 11354, 12434 Pioneer 10142, 10631, 11571, 12442 Polk Audio 10539 Presidian 10675 Proscan 10522 RCA 10522, 11769, 10822, 12213, 12587, 12592, 12594 Rio 10869 Rotel 10623 Samsung 10490, 10573, 10199, 11044, 11075, 12329, 12489 Sansui 10695 Sanyo 10695 Sharp 10630, 10675, 12250 Shinsonic 10533 Sonic Blue 10869 Sylvania 10675 Symphonic 10675 TCL 12587 Technics 10490 Tivo 11503 Toshiba 10503, 11769, 10695, 11154, 11503, 12006, 12277 Urban Concepts 10503 Viore 12553 Vizio 12563 Vtrek 12587 Xbox 10522, 12083 Yamaha 10490, 10539, 10497, 10817, 12298 Zenith 10503, 10591, 10741, 10869
DVDplayer / Reproductor de DVD
Brand Code No. Sony 11033, 11070, 11431 Accurian 10675 Apex Digital 11056 Funai 10675 Go Video 10741 JVC 11164 LG 10741 Magnavox 10646, 10675 Panasonic 10490, 11579
Brand Code No. Philips 10646 Pioneer 10631 RCA 10522 Samsung 10490 Sharp 10675 Sylvania 10675 Toshiba 12277 Zenith 10741
DVDrecorder / Grabadora de DVD
Blu-ray Disc/HD-DVDplayer/ Reproductor de Blu-ray Disc/HD-DVD Brand Code No. Sony 11516 Denon 12258 Insignia 10675, 12428, 12596 Integra 11769, 12147 LG 10741 Magnavox 10675 Marantz 12414, 12432 Microsoft 12083 NAD 12572 Olevia 12331 Onkyo 11769, 12147 Oppo 12545
Brand Code No. Panasonic 11641 Philips 12084, 12434 Pioneer 10142, 12442 RCA 11769 Samsung 10199 Sharp 12250 Sylvania 10675 Toshiba 11769 Viore 12553 Vizio 12563 Xbox 12083 Yamaha 12298
Brand Code No.
Sony 00810, 00000
Acer 01339
Action 00650
Brand Code No.
Midland 00051
Mitsubishi 01250, 00150, 00836
NAD 00156
TV/ TV
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial Solutions 01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Panasonic 01480, 00051, 00650
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744, 02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
If your device is not listed, try the Search function (see Searching for the correct code).
2 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press
the desired Device Select button,
then release both buttons.
3 Enter the manufacturers code (01454).
The SET indicator flashes three times and
turns off.

Operate the device


1 Aim the RM-VZ220 directly at the device.
2 Press the Device Select button for the
device you want to operate.
3 Press POWER to turn on the device.
4 Press buttons on the RM-VZ220 to check that they function.
See Remote Button Descriptions for the functions of buttons for each device.
If the RM-VZ220 does not seemto be working
Check that you have set the correct manufacturers code.
Try repeating the setup procedure using another manufacturers code (if listed for your device).
If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see Searching
for the correct code).
Notes
If the setting is incomplete,
the SET indicator flashes once
and the indicators turn off.
Start again fromthe
beginning.
If no operations are
performed for 10 seconds
while setting, the setting will
be canceled, and must be
restarted.
To cancel the process, press
SET any time. The SET
indicator turns off.
SET
POWER
Device
Select
buttons
Number
buttons
The SET indicator
lights up.
Searching for the correct code
You can set the manufacturers code using the Search function.
1 Power on the device with its power switch.
2 Aimthe RM-VZ220 at the device you want to set.
3 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
4 Enter 9 - 2 - 2 using the number buttons.
The SET indicator flashes three times.
5 Press and hold to start searching.
When the device turns off, release the button.
If you overshoot the required code, you can search for the next or previous
code using the or ~ button.
6 Press .
The SET indicator flashes three times and turns off.
7 Check if the code number works correctly (see Remote Button
Descriptions).
If you still cannot operate the device, repeat steps to search for another
code that works for most functions of your device.
Checking the manufacturers code you have set
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
2 Enter 9 - 3 - 3 using the number buttons.
The SET indicator flashes three times.
3 Press .
4 When the SET indicator starts flashing, count the number of flashes.
Short flash(es) indicate which digit (first, second, etc.), followed by long
flash(es) to indicate the digit number (i.e., 2 long flashes represent the
number 2). 0 is indicated by rapid flashing.
Determine the 5-digit code number this way. To recheck, press .
5 Press SET to finish.
Clearing the automatic power-on control (Sony
devices only)
The Device Select buttons are preset to automatically turn on a device when
pressed.
To cancel the function:
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press , then release both buttons.
2 Enter 9 - 7 - 7 using the number buttons.
The SET indicator flashes three times.
3 Press the desired Device Select button.
The SET indicator flashes three times and turns off.
To set the function again, performthe same procedure above.
Restoring the factory settings
You can clear all the settings and reset the RM-VZ220 to its factory settings.
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press , then release both buttons.
2 Enter 9 - 0 - 0 using the number buttons.
The SET indicator flashes three times.
To cancel, press any button except .
3 Press .
The SET indicator flashes three times and turns off.
Remote Button Descriptions
General
_ SET: Press to set up the RM-VZ220. The indicator lights or flashes while
setting.
_Device Select buttons: Press to select the device to operate.
_GUIDE: Displays the programguide (EPG).
+//+/+/ : Moves the cursor to select a menu item/enters the selected item.
_RETURN: Returns to the previous display/exits the menu.
jVOL +/: Turns the volume up/down.
jPOWER: Turns the selected device on and off.
gMUTING: Mutes the volume. Press again to turn muting off.
gSLEEP: Enables the Sleep function (when available).
The number 5, CH+, and buttons each have a tactile dot for ease of use.
The GUIDE and RETURN buttons do not work for a VCR.
Note on theVOL+/ and MUTINGbuttons
When a TV or other video device is selected, the TVs volume is controlled. When a
DVD Home Theater is selected, its volume can be controlled.
TV
m: VIDEO 1 input
: VIDEO 2 input
: HDMI input
: RGB input
~: (PIP INPUT) Changes the
input mode of the window
picture.
: (PIP) Turns the window
picture on and off.
: (PIP MOVE) Moves the
location of the window picture.
H: (PIP STILL) Freezes the
window picture.
N: (PIP SWAP) Switches between
main and window picture.
_A: Red button
B: Green button
C: Yellow button
D: Blue button
jLIST: (CAPTION) Displays closed
captioning.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
jjg1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: (PIP CH+/) Changes
the channel up/down in the
window picture.
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the options
menu.
gRECALL: Selects the channel
previously selected.
gCH +/: Switches the channel up/
down.
Cable set top box/IPTV
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A, B, C buttons
D: (Live TV) Displays Master
Guide.
jLIST: Displays the title of recorded
program.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
jjg1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: Page up/down
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the options
menu.
gRECALL: Switches between the
current and previous channel.
gCH +/: Switches the channel up/
down.
Satellite receiver
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: Red button
B: Green button
C: Yellow button
D: Blue button
jLIST: Displays the title of recorded
program/PVR menu.
jMENU: Calls up the menu display.
_INPUT: (TV/SAT) Switches the
output between SAT and TV.
jjg1 9, 0, ENTER, (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
jPAGE +/: Page up/down
jFAVORITES: Enables the Favorite
function.
jINFO: Displays program
information.
gOPTIONS: Displays the Satellite
dish menu/Station Index.
gRECALL: Tunes to the last tuned
station.
gCH +/: Switches the channel up/
down.
VCR
~: Rewinds.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j: Ejects a tape.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: (ANT/SW) Switches
the antenna output.
gRECALL: (DRIVE SELECT) Selects
the deck.
gCH +/: Switches the channel up/
down.
gENTER: Enters the selected item.
DVDplayer/recorder
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records (for DVD recorder).
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jLIST: Displays the Title List.
jMENU: Displays the DVD menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +: (DVD) Selects the DVD
drive.
PAGE : (HDD) Selects the
internal HDD (hard disk drive).
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the options
menu.
gRECALL: (DRIVE SELECT)
Switches between HDD and DVD.
gCH +/: Switches the channel up/
down (for DVD recorder).
gENTER: Enters the selected item.
Blu-ray Disc/HD-DVDplayer
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records (for BD recorder).
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jMENU: Displays the Pop-up Menu/
Disc Menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +: (BD) Selects the BD drive.
PAGE : (HDD) Selects the
internal HDD (hard disk drive).
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the options
menu.
gENTER: Enters the selected item.
DVR (digital video recorder)/PVR (personal video recorder)
m: Proceeds to the previous
location.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: (REPLAY*) Enables the Replay
function for DVR/Replay TV.
B: (Live TV*) Displays Master
Guide.
jLIST: Displays the title of recorded
program.
jMENU: Calls up the menu display.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jPAGE +/: Page up/down,
Thumbs* up/down
jINFO: (DISPLAY) Displays the
playback information.
gRECALL: Selects the channel
previously selected.
gCH +/: Switches the channel up/
down.
gENTER: Enters the selected item.
* These buttons correspond to TiVo
service or the Replay service. Refer to
its instruction manual for details.
DVDHomeTheater
m: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash ).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
~: Fast reverses.
: Plays.
: Fast forwards.
: Records.
H: Pauses.
N: Stops.
_A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
jLIST: Enables the SOUND FIELD
function.
jMENU: Displays the DVD menu.
_INPUT: Changes the input mode.
j1 9, 0: Number buttons
j (dot): (+10) Selects numbers 10
and above.
j: Opens/closes the disc tray.
jFAVORITES: (TOP MENU)
Displays the Top Menu.
jINFO: (DISPLAY) Displays the
playback information.
gOPTIONS: Displays the amplifier
menu.
gRECALL: (BAND) Selects FM/AM.
gCH +/: Presets or tunes frequency
up/down.
gENTER: Enters the selected item.
Notes on using the RM-VZ220
The RM-VZ220 will not performfunctions that the device is not designed for. For
example, if your TV does not have the muting function, MUTING on the RM-VZ220
will not function with your TV.
The function of the buttons varies depending on settings/operating modes. The table
of Remote Button Descriptions shows how the RM-VZ220 generally operates for
each device in the preset mode.
If your cable set top box can control volume, be sure to set its volume to a moderate
level. If the volume on the cable set top box is turned down completely, you will not be
able to adjust your TVs volume with the RM-VZ220.
Manufacturers Code List /
Lista de cdigos del fabricante
English
The following tables show brand names (Brand) and their corresponding
code numbers (Code No.).
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
2 Enter the manufacturers code.
The SET indicator flashes three times and turns off.
Espaol
La siguiente tabla muestra los nombres de las marcas (Brand) y el nmero
de cdigo correspondiente (Code No.).
1 Presione y mantenga presionado el botn SET durante ms de 3 segundos.
Se encender la luz indicadora SET.
Mientras tiene presionado el botn SET, presione el botn de seleccin de
dispositivo deseado y luego suelte ambos botones.
2 Ingrese el cdigo del fabricante.
El indicador SET parpadear tres veces y se apagar.
Brand Code No.
Acer 01339
Action 00650
Admiral 00463
Akai 00812, 01675, 00702, 02232
Akira 01733
AOC 01365, 01589
Apex Digital 00748
Aventura 00171
Bell & Howell 00154
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial
Solutions
01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Dynex 01463, 01810, 02049
Electroband 00000
Electrograph 01755
Electrohome 00463
Elektra 01661
Element 01687
Emerson 01864, 00154, 00463, 00171,
01661, 01394
Emprex 01765
Envision 01365, 01589
ESA 00812, 00171
Fisher 00154
Funai 00171
Gateway 01755, 01756
GE 01447, 00051, 02359
GFM 00171
Haier 01748, 01749, 02309, 02449
Harman/Kardon 00054
Hisense 00748, 01314, 02098
Hitachi 01643, 02215, 02433
iLo 01684
Infinity 00054
Insignia 01564, 00171, 02049
JBL 00054
JCB 00000
JVC 00731, 01253, 01601, 01774
KDS 01687
Kolin 01331
LG 01423, 02358
LXI 00054, 00154, 00156
MAG 01687
Magnavox 01454, 01866, 00054, 01254,
01365, 02372
Marantz 00054
Matsushita 00650
Maxent 01755
Memorex 00154, 00463, 00150
MGA 00150
Midland 00051
Brand Code No.
Mitsubishi 01250, 00150, 00836
NAD 00156
NEC 01797
NetTV 01755
Norcent 00748, 01365, 01589
Olevia 01610, 01144, 01331
Onida 01253, 02396
Optimus 00154, 00650
Orion 00463, 01463
Panasonic 01480, 00051, 00650
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744,
02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
Quasar 00051, 00650
RadioShack 00154
RCA 01447, 01781, 02187, 02247,
02403, 02429, 02434
Realistic 00154
Sampo 01755
Samsung 00812, 00702
Sansui 00463
Sanyo 00154, 01142
Sceptre 01360, 01599
Scott 01711
Sears 00054, 00154, 00156, 00171
Sharp 00818
Sony 00810, 00000
Spectroniq 01687
Squareview 00171
Superscan 00864
Supreme 00000
SVA 00748
Sylvania 01864, 00054, 00171, 01314,
01394
Symphonic 00171
Syntax 01610, 01144, 01331
Tatung 01756
TCL 02403, 02429
Technics 00051
Techwood 00051
Teknika 00054, 00150
Telefunken 00702
Toshiba 01524, 00154, 00156, 00650
TVS 00463
Venturer 01865
Videocon 01540, 01541, 02436
Vidikron 00054
Viewsonic 01755, 00864, 00885, 01627,
01742
Viore 01684, 02104, 02352
Vizio 01758, 00864, 00885, 01756
VU 02098
TV/ TV
Brand Code No.
Wards 00054
Waycon 00156
Westinghouse 01712, 00885, 01577
White
Westinghouse
00463, 01661
Wyse 01365
Zenith 00463, 01661
Brand Code No.
Accurian 10675
Akai 10695
Allegro 10869
Apex Digital 10672, 11056
Bel Canto Design 11571
Broksonic 10695
CineVision 10869
Citizen 10695
CyberHome 11024
Daewoo 10869
Denon 10490, 11634, 12258
Disney 10675, 11270
Emerson 10591, 10675
Enterprise 10591
Funai 10675
GE 10522
GFM 10675
Go Video 10744, 10741, 10869, 11044,
11075
GoldStar 10741
Harman/Kardon 11229
Hitachi 10573, 10664
Hiteker 10672
Insignia 10675, 12428, 12596
Integra 11769, 10627, 12147
JVC 10623, 10867, 11164
Kenwood 10490
LG 10591, 10741, 10869
Magnavox 10503, 10539, 10646, 10675,
11354
Marantz 10539, 12414, 12432
Memorex 10695, 11270, 12213
Microsoft 10522, 12083
Mitsubishi 11521
NAD 10741, 12572
Olevia 12331
Onkyo 10503, 11769, 10627, 11627,
12147
Brand Code No.
Oppo 10575, 12545
Panasonic 10490, 11579, 11641
Philco 10675
Philips 10503, 10539, 12056, 12084,
10646, 10675, 11267, 11354,
12434
Pioneer 10142, 10631, 11571, 12442
Polk Audio 10539
Presidian 10675
Proscan 10522
RCA 10522, 11769, 10822, 12213,
12587, 12592, 12594
Rio 10869
Rotel 10623
Samsung 10490, 10573, 10199, 11044,
11075, 12329, 12489
Sansui 10695
Sanyo 10695
Sharp 10630, 10675, 12250
Shinsonic 10533
Sonic Blue 10869
Sony 11633, 10533, 10864, 11033,
11070, 11431, 11516
Sylvania 10675
Symphonic 10675
TCL 12587
Technics 10490
Tivo 11503
Toshiba 10503, 11769, 10695, 11154,
11503, 12006, 12277
Urban Concepts 10503
Viore 12553
Vizio 12563
Vtrek 12587
Xbox 10522, 12083
Yamaha 10490, 10539, 10497, 10817,
12298
Zenith 10503, 10591, 10741, 10869
DVDplayer / Reproductor de DVD
Brand Code No.
Accurian 10675
Apex Digital 11056
Funai 10675
Go Video 10741
JVC 11164
LG 10741
Magnavox 10646, 10675
Panasonic 10490, 11579
Philips 10646
Brand Code No.
Pioneer 10631
RCA 10522
Samsung 10490
Sharp 10675
Sony 11033, 11070, 11431
Sylvania 10675
Toshiba 12277
Zenith 10741
DVDrecorder / Grabadora de DVD
Blu-ray Disc/HD-DVDplayer/
Reproductor de Blu-ray Disc/HD-DVD
Brand Code No.
Denon 12258
Insignia 10675, 12428, 12596
Integra 11769, 12147
LG 10741
Magnavox 10675
Marantz 12414, 12432
Microsoft 12083
NAD 12572
Olevia 12331
Onkyo 11769, 12147
Oppo 12545
Panasonic 11641
Brand Code No.
Philips 12084, 12434
Pioneer 10142, 12442
RCA 11769
Samsung 10199
Sharp 12250
Sony 11516
Sylvania 10675
Toshiba 11769
Viore 12553
Vizio 12563
Xbox 12083
Yamaha 12298
Si su dispositivo no figura en la lista, intente con la funcin Bsqueda (consulte Bsqueda del
cdigo del fabricante).
2 Presione y mantenga presionado el
botn SET durante ms de 3 segundos.
Se encender la luz indicadora SET.
Mientras tiene presionado el botn
SET, presione el botn de seleccin
de dispositivo deseado y luego suelte
ambos botones.
3 Ingrese el cdigo del fabricante (01454).
El indicador SET parpadear tres veces y se
apagar.

Funcionamiento del dispositivo


1 Apunte el RM-VZ220 directamente al dispositivo.
2 Presione el botn de seleccin de dispositivo
del dispositivo que desee hacer funcionar.
3 Presione POWER para encender el dispositivo.
4 Presione los botones en el RM-VZ220 para comprobar que funcionan.
Consulte Descripcin de los botones del control remoto para conocer las funciones de los botones para cada
dispositivo.
Si el RM-VZ220 parece no estar funcionando
Compruebe que haya establecido el cdigo del fabricante correcto.
Intente repetir el procedimiento de configuracin usando otro cdigo de fabricante (si hay otros en la
enumeracin de cdigos de su dispositivo).
Si sigue sin poder operar el RM-VZ220 despus de probar todos los cdigos de la lista, intente con la funcin
Bsqueda (consulte Bsqueda del cdigo del fabricante).
Notas
Si la configuracin est
incompleta, el indicador SET
parpadear una vez y los
indicadores se apagarn.
Vuelva a comenzar desde el
principio.
Si no se realizan operaciones
en el transcurso de 10
segundos cuando se est
realizando la configuracin, la
configuracin se cancelar y
deber volver a iniciarse.
Para cancelar el proceso,
presione SET en cualquier
momento. El indicador SET se
apaga.
SET
POWER
Botones de
seleccin
de
dispositivo
Botones
numricos
Se encender la luz
indicadora SET.
Bsqueda del cdigo del fabricante
Puede configurar el cdigo del fabricante correcto usando la funcin
Bsqueda.
1 Encienda el dispositivo con su botn de encendido.
2 Apunte el RM-VZ220 al dispositivo que desea configurar.
3 Presione y mantenga presionado el botn SET durante ms de 3 segundos.
Se encender la luz indicadora SET.
Mientras tiene presionado el botn SET, presione el botn de seleccin de
dispositivo deseado y luego suelte ambos botones.
4 Ingrese 9 - 2 - 2 usando los botones con nmeros.
El indicador SET parpadea tres veces.
5 Presione y mantenga presionado para comenzar a buscar.
Cuando el dispositivo se apague suelte el botn.
Si se pasa del cdigo que necesita, puede buscar el cdigo anterior o
siguiente con los botones o ~.
6 Presione .
El indicador SET parpadear tres veces y se apagar.
7 Compruebe si el nmero de cdigo funciona correctamente (consulte
Descripcin de los botones del control remoto).
Si sigue sin poder operar el dispositivo, repita los pasos para buscar otro
cdigo que funcione con la mayora de las funciones de su dispositivo.
Comprobacin del cdigo del fabricante que
configur
1 Presione y mantenga presionado el botn SET durante ms de 3 segundos.
Se encender la luz indicadora SET.
Mientras tiene presionado el botn SET, presione el botn de seleccin de
dispositivo deseado y luego suelte ambos botones.
2 Ingrese 9 - 3 - 3 usando los botones con nmeros.
El indicador SET parpadea tres veces.
3 Presione .
4 Cuando el indicador SET comience a parpadear, cuente el nmero de
parpadeos.
Los parpadeos cortos indican el dgito (primero, segundo, etc.), seguidos
de los parpadeos largos que indican el nmero del dgito (p. ej., 2
parpadeos largos representan el nmero 2). Los parpadeos rpidos
representan el 0.
Determine de esta forma el nmero de cdigo de 5 dgitos. Para chequear
nuevamente, presione .
5 Presione SET para finalizar.
Para anular el control de encendido automtico
(solamente de los dispositivos Sony)
Los botones de seleccin del dispositivo estn configurados para encender
un dispositivo en forma automtica cuando se presionan.
Para cancelar la funcin:
1 Presione y mantenga presionado SET durante ms de 3 segundos.
Se encender la luz indicadora SET.
Mientras mantiene presionado SET, presione , luego suelte ambos
botones.
2 Ingrese 9 - 7 - 7 usando los botones con nmeros.
El indicador SET parpadea tres veces.
3 Presione el botn de seleccin de dispositivos que desea.
El indicador SET parpadear tres veces y se apagar.
Para volver a establecer la funcin, siga el mismo procedimiento descrito
arriba.
Recuperacin de la configuracin de fbrica
Puede eliminar todas las configuraciones y restablecer la configuracin de
fbrica del RM-VZ220.
1 Presione y mantenga presionado SET durante ms de 3 segundos.
Se encender la luz indicadora SET.
Mientras mantiene presionado SET, presione , luego suelte ambos
botones.
2 Ingrese 9 - 0 - 0 usando los botones con nmeros.
El indicador SET parpadea tres veces.
Para cancelar presione cualquier botn excepto .
3 Presione .
El indicador SET parpadear tres veces y se apagar.
Decodificador de cable/IPTV
m: Va a la ubicacin anterior.
: Muestra otra vez brevemente
la escena (Flash ).
: Avanza brevemente la escena
(Flash +).
: Va a la siguiente ubicacin.
~: Rebobina rpidamente.
: Reproduce.
: Avanza rpidamente.
: Graba.
H: Pausa.
N: Detiene.
_Botones A, B, C
D: (Live TV) Muestra la gua
maestra.
jLIST: Muestra el ttulo del
programa grabado.
jMENU: Muestra el men.
_INPUT: Cambia el modo de
entrada.
jj g 1 9, 0, ENTER, (punto):
Cambia de canal. Por ejemplo, para
cambiar al canal 5, presione 0 y 5
(o presione 5 y ENTER).
jPAGE +/: Avanza/retrocede la
pgina.
jFAVORITES: Habilita la funcin
Favorito.
jINFO: Muestra informacin de
programacin.
gOPTIONS: Muestra el men de
opciones.
gRECALL: Cambia entre el canal
actual y el anterior.
gCH +/: Cambia el canal hacia
arriba/abajo.
Receptor de satlite
m: Va a la ubicacin anterior.
: Muestra otra vez brevemente
la escena (Flash ).
: Avanza brevemente la escena
(Flash +).
: Va a la siguiente ubicacin.
~: Rebobina rpidamente.
: Reproduce.
: Avanza rpidamente.
: Graba.
H: Pausa.
N: Detiene.
_A: Botn rojo
B: Botn verde
C: Botn amarillo
D: Botn azul
jLIST: Muestra el ttulo del
programa grabado/el men PVR.
jMENU: Muestra el men.
_INPUT: (TV/SAT) Cambia la salida
entre SAT y TV (cuando est
conectado a un televisor).
jj g1 9, 0, ENTER, (punto):
Cambia de canal. Por ejemplo, para
cambiar al canal 5, presione 0 y 5
(o presione 5 y ENTER).
jPAGE +/: Avanza/retrocede la
pgina
jFAVORITES: Habilita la funcin
Favorito.
jINFO: Muestra informacin de
programacin.
gOPTIONS: Muestra el men del
satlite/ndice de la estacin.
gRECALL: Sintoniza la ltima
estacin sintonizada.
gCH +/: Cambia el canal hacia
arriba/abajo.
VCR
~: Rebobina.
: Reproduce.
: Avanza rpidamente.
: Graba.
H: Pausa.
N: Detiene.
_INPUT: Cambia el modo de
entrada.
j1 9, 0: Botones numricos
j: Expulsa la cinta.
jINFO: (MOSTRAR) Muestra la
informacin de reproduccin.
gOPTIONS: (ANT/SW) Cambia la
salida de la antena.
gRECALL: (SELECCIONAR LA
UNIDAD) Selecciona la casetera.
gCH +/: Cambia el canal hacia
arriba/abajo.
gENTER: Accede al elemento
seleccionado.
Reproductor/grabador de DVD
m: Va al captulo/pista anterior.
: Muestra otra vez brevemente
la escena (Flash ).
: Avanza brevemente la escena
(Flash +).
: Va al siguiente captulo/pista.
~: Rebobina rpidamente.
: Reproduce.
: Avanza rpidamente.
: Graba (para la grabadora de
DVD).
H: Pausa.
N: Detiene.
_A: (CONFIGURACIN) Muestra
el men del sistema/
configuracin.
B: (SUBTTULO) Cambia el
subttulo.
C: (AUDIO) Cambia el sonido.
D: (BORRAR) Borra la
configuracin.
jLIST: Muestra la lista de ttulos.
jMENU: Muestra el men del DVD.
_INPUT: Cambia el modo de
entrada.
j1 9, 0: Botones numricos
j (punto): (+10) Selecciona los
nmeros a partir del 10.
j: Abre/cierra la bandeja del disco.
jPAGE +: (DVD) Selecciona la
unidad de DVD.
PAGE : (HDD) Selecciona el disco
duro interno.
jFAVORITES: (MEN PRINCIPAL)
Muestra el men principal.
jINFO: (MOSTRAR) Muestra la
informacin de reproduccin.
gOPTIONS: Muestra el men de
opciones.
gRECALL: (SELECCIN DE LA
UNIDAD) Cambia entre HDD y
DVD.
gCH +/: Cambia el canal hacia
arriba/abajo (para la grabadora de
DVD).
gENTER: Accede al elemento
seleccionado.
Descripcin de los botones del control
remoto
General
_ SET: Presione para configurar el RM-VZ220. El indicador se enciende o
parpadea durante la configuracin.
_Botones de seleccin de dispositivo: Presione para seleccionar el
dispositivo para operar.
_GUIDE: Muestra la gua de programacin (EPG).
+//+/+/ : Mueve el cursor para seleccionar un elemento del men. Accede
al elemento seleccionado.
_RETURN: Vuelve a la visualizacin anterior/sale del men.
jVOL +/: Sube/baja el volumen.
jPOWER: Enciende y apaga el dispositivo seleccionado.
gMUTING: Silencia el volumen. Presione nuevamente para silenciar el volumen.
gSLEEP: Habilita la funcin Sleep (cuando est disponible).
El nmero 5, CH+ y el botn tienen un punto tctil cada uno para facilitar el uso.
Los botones GUIDE y RETURN no funcionan con un VCR.
Nota sobre los botones VOL+/ y MUTING
Cuando se selecciona un TV u otro dispositivo de video, se controla el volumen del TV.
Cuando se selecciona un DVD con cine en casa, se puede controlar el volumen.
TV
m: Entrada de VIDEO 1
: Entrada de VIDEO 2
: Entrada de HDMI
: Entrada de RGB
~: (ENTRADA PIP) Cambia la
entrada de la imagen de la
ventana.
: (PIP) Enciende y apaga la
ventana.
: (MOVER PIP) Mueve la
ubicacin de la imagen de la
ventana.
H: (PAUSAR PIP) Congela la
imagen de la ventana.
N: (CAMBIAR PIP) Cambia entre
la imagen principal y la ventana.
_A: Botn rojo
B: Botn verde
C: Botn amarillo
D: Botn azul
jLIST: (SUBTTULO) Muestra los
subttulos.
jMENU: Muestra el men.
_INPUT: Cambia el modo de
entrada.
jjg1 9, 0, ENTER, (punto):
Cambia de canal. Por ejemplo, para
cambiar al canal 5, presione 0 y 5
(o presione 5 y ENTER).
jPAGE +/: (CANAL DE PIP +/)
PIP CHCambia el canal hacia
arriba/abajo en la imagen de la
ventana.
jFAVORITES: Habilita la funcin
Favorito.
jINFO: Muestra informacin de
programacin.
gOPTIONS: Muestra el men de
opciones.
gRECALL: Selecciona el canal
seleccionado previamente.
gCH +/: Cambia el canal hacia
arriba/abajo.
Reproductor de Blu-ray Disc/HD-DVD
m: Va al captulo/pista anterior.
: Muestra otra vez brevemente
la escena (Flash ).
: Avanza brevemente la escena
(Flash +).
: Va al siguiente captulo/pista.
~: Rebobina rpidamente.
: Reproduce.
: Avanza rpidamente.
: Graba (para grabadora de BD).
H: Pausa.
N: Detiene.
_A: (CONFIGURACIN) Muestra
el men del sistema/
configuracin.
B: (SUBTTULO) Cambia el
subttulo.
C: (AUDIO) Cambia el sonido.
D: (BORRAR) Borra la
configuracin.
jMENU: Muestra el men
emergente/men del disco.
_INPUT: Cambia el modo de
entrada.
j1 9, 0: Botones numricos
j (punto): (+10) Selecciona los
nmeros a partir del 10.
j: Abre/cierra la bandeja del disco.
jPAGE +: (BD) Selecciona la unidad
de BD.
PAGE : (HDD) Selecciona el disco
duro interno.
jFAVORITES: (MEN PRINCIPAL)
Muestra el men principal.
jINFO: (MOSTRAR) Muestra la
informacin de reproduccin.
gOPTIONS: Muestra el men de
opciones.
gENTER: Accede al elemento
seleccionado.
DVR (videograbadora digital)/PVR (videograbadora personal)
m: Va a la ubicacin anterior.
: Muestra otra vez brevemente
la escena (Flash ).
: Avanza brevemente la escena
(Flash +).
: Va a la siguiente ubicacin.
~: Rebobina rpidamente.
: Reproduce.
: Avanza rpidamente.
: Graba.
H: Pausa.
N: Detiene.
_A: (VOLVER A REPRODUCIR*)
Habilita la funcin para volver a
reproducir para DVR/Replay
TV.
B: (Live TV*) Muestra la gua
maestra.
jLIST: Muestra el ttulo del
programa grabado.
jMENU: Muestra el men.
_INPUT: Cambia el modo de
entrada.
j1 9, 0: Botones numricos
j (punto): (+10) Selecciona los
nmeros a partir del 10.
j: Abre/cierra la bandeja del disco.
jPAGE +/: Avanza/retrocede la
pgina, Buscar* arriba/abajo
jINFO: (MOSTRAR) Muestra la
informacin de reproduccin.
gRECALL: Selecciona el canal
seleccionado previamente.
gCH +/: Cambia el canal hacia
arriba/abajo.
gENTER: Accede al elemento
seleccionado.
* Estos botones corresponden al servicio
TiVo o al servicio Replay. Consulte su
manual de instrucciones para obtener
ms detalles.
DVDcon cine en casa
m: Va al captulo/pista anterior.
: Muestra otra vez brevemente
la escena (Flash ).
: Avanza brevemente la escena
(Flash +).
: Va al siguiente captulo/pista.
~: Rebobina rpidamente.
: Reproduce.
: Avanza rpidamente.
: Graba.
H: Pausa.
N: Detiene.
_A: (CONFIGURACIN) Muestra
el men del sistema/
configuracin.
B: (SUBTTULO) Cambia el
subttulo.
C: (AUDIO) Cambia el sonido.
D: (BORRAR) Borra la
configuracin.
jLIST: Habilita la funcin CAMPO
DE SONIDO.
jMENU: Muestra el men del DVD.
_INPUT: Cambia el modo de
entrada.
j1 9, 0: Botones numricos
j (punto): (+10) Selecciona los
nmeros a partir del 10.
j: Abre/cierra la bandeja del disco.
jFAVORITES: (MEN PRINCIPAL)
Muestra el men principal.
jINFO: (MOSTRAR) Muestra la
informacin de reproduccin.
gOPTIONS: Muestra el men del
amplificador.
gRECALL: (BANDA) Selecciona
FM/AM.
gCH +/: Configura o sintoniza la
frecuencia hacia arriba/abajo.
gENTER: Accede al elemento
seleccionado.
Notas sobre el uso del RM-VZ220
El RM-VZ220 no puede realizar funciones que el dispositivo no est diseado para
realizar. Por ejemplo, si su TV no tiene una funcin para silenciar el sonido, la funcin
MUTING en el RM-VZ220 no funcionar con su TV.
La funcin de los botones vara dependiendo de los modos de configuracin/
operacin. La tabla de Descripcin de los botones del control remoto muestra cmo
el RM-VZ220 opera en general con cada dispositivo en el modo configurado.
Si el decodificador de cable puede controlar el volumen, asegrese de establecerlo en
un nivel moderado. Si el volumen en el decodificador de cable se baja por completo,
no podr ajustar el volumen de su TV con el RM-VZ220.
Cable set top box / Decodificador de cable
Brand Code No.
ADB 51927
Bright House 51376, 51877
Cable One 51376, 51877
Cablevision 51376, 51877, 51006
Charter 51376, 51877, 52187
Cisco 51877, 50877, 51982
Comcast 51376, 51877, 51982, 52576
Cox 51376, 51877
Digeo 51187, 52187
Director 50476
General
Instrument
50476
Insight 51376, 51877
Jerrold 50476
Knology 51877
Mediacom 51376, 51877
Brand Code No.
Motorola 51376, 50476, 51187, 51982
NET 50277
Pace 51877, 51982
Panasonic 51982
Philips 51305
Pioneer 51877, 50877
Rogers 51877
Scientific Atlanta 51877, 50877, 50277
Shaw 51376
Sony 51006
StarHub 51927
Suddenlink 51376, 51877
Time Warner 51376, 51877, 52187
Tivo 52576
US Electronics 50277
WideOpenWest 51877
IPTV/ IPTV
Brand Code No.
AT&T 50858
Azteca 52237
BesTV 52327
Cisco 52345
Motorola 51998, 50858, 52275, 52378
Reliance 52452
Brand Code No.
Scientific Atlanta 50858, 52345
SingTel 51998, 52275
Thomson 52237
UTStarcom 52327
Verizon 52378
Satellite receiver / Receptor de satlite
Brand Code No.
Airtel 42248
Astro 42600
Bell ExpressVu 40775
DirecTV 41377, 40566, 40749, 40099,
41442
Dish Network 40775
Dishpro 40775
Echostar 40775, 42527
Expressvu 40775
GE 40566
GOI 40775
Hisense 41535
HTS 40775
Hughes Network
Systems
40749, 41442
iLo 41535
Indovision 40856
JVC 40775
Magnavox 40722
Mitsubishi 40749
Brand Code No.
Multichoice 42059, 42060
NET 41883
Net Brazil 41883
Pace 40887
Philips 40749, 40722, 40099, 41442
Proscan 40566
Proton 41535
RCA 40566
Samsung 41377, 41442
SKY 40856, 42619
SKY Brazil 40856, 40887, 41499
SKY Mexico 40856, 42619
Telefonica 42527
Tivo 41442
Toshiba 40749
Uniden 40722
US Digital 41535
USDTV 41535
Zenith 40856
DVR (digital video recorder)/PVR (personal video recorder)
DVR (videograbadora digital)/PVR (videograbadora personal)
Brand Code No.
DirecTV 20739
Go Video 20614
Hughes Network
Systems
20739
Humax 20739
Panasonic 20614, 20616
Philips 20739, 20618
Brand Code No.
ReplayTV 20614, 20616
Samsung 20739
Sonic Blue 20614, 20616
Sony 20636
Tivo 20739, 20618, 20636
Toshiba 21008
VCR / VCR
Brand Code No.
Admiral 60048
Aiwa 60037
Allegro 61137
American High 60035
Audiovox 60037
Calix 60037
Canon 60035
Carver 60081
CineVision 61137
Citizen 60037
Craig 60037
Curtis Mathes 60060, 60035, 60162
Daewoo 61137
Denon 60042
DirecTV 60739
Durabrand 60038
Electrohome 60037
Electrophonic 60037
Emerex 60032
Emerson 60037, 60043
ESA 61137
Fuji 60035, 60033
GE 60060, 60035
Go Video 60614, 61137
GoldStar 60037, 60038, 61137
Gradiente 61137
Harman/Kardon 60081, 60038
Hitachi 60042
Hughes Network
Systems
60739, 60042
Humax 60739
Instant Replay 60035
JVC 60067
KEC 60037
Kenwood 60067, 60038
Kodak 60035, 60037
LG 61137
LXI 60037
Magnavox 60035, 60081
Marantz 60035, 60081
Marta 60037
Matsushita 60035, 60162
MEI 60035
Memorex 60035, 60162, 60037, 60048
MGA 60043
Minolta 60042
Mitsubishi 60067, 60043
Brand Code No.
Motorola 60035, 60048
NEC 60067, 60038
Nikko 60037
Olympus 60035
Optimus 61062, 60162, 60037, 60048
Panasonic 61062, 60035, 60162, 60614,
60616, 61562
Penney 60035, 60037, 60042, 60038
Pentax 60042
Philco 60035
Philips 60739, 60035, 60081, 60618
Pilot 60037
Pioneer 60067
Polk Audio 60081
Proscan 60060
Quasar 60035, 60162
Radix 60037
Randex 60037
RCA 60060, 60042
Realistic 60035, 60037, 60048
ReplayTV 60614, 60616
Rio 61137
Samsung 60739
Sanky 60048
Sansui 60067
Scott 60043
Sears 60035, 60037, 60042
Sensory Science 61155
Sharp 60048
Sonic Blue 60614, 60616, 61137
Sony 60032, 60033, 60636
STS 60042
Sylvania 60035, 60081, 60043
Tashiko 60037
Technics 60035, 60162
Teknika 60035, 60037
Tivo 60739, 60618, 60636
Toshiba 60043, 61008
Totevision 60037
Vector Research 60038
Videomagic 60037
Wards 60060, 60035, 60048, 60081,
60042
XR-1000 60035
Yamaha 60038
Zenith 60033, 61137
DVDHomeTheater / DVDcon cine en casa
Brand Code No.
Anam 31609
Bose 31229, 31629, 31933
Denon 32857
Harman/Kardon 31306
HitPlus 32483
Insignia 31751, 32175
Integra 31298
JBL 31306
JVC 31374, 32239, 32331
LG 31293, 32197, 32284
Magnavox 31514
NexxTech 31751
Norcent 31751
Brand Code No.
Onida 32482
Onkyo 31298, 31531
Panasonic 31288, 31548, 31633, 31763,
31764, 32452, 32967
Philco 31838
Philips 31266, 32311, 32459
Pioneer 31935
RCA 31609, 32041, 32426
Samsung 31295, 31500, 31868
Sony 31622, 31558, 31658, 31758,
31822, 31858, 32522
Vtrek 32426, 32483
Zenith 31293

Vous aimerez peut-être aussi